[Objectives]This study was conducted to purify mutton samples by gel permeation chromatography(GPC).[Methods]Fourteen organophosphorus pesticide residues in samples were qualitatively and quantitatively analyzed by ga...[Objectives]This study was conducted to purify mutton samples by gel permeation chromatography(GPC).[Methods]Fourteen organophosphorus pesticide residues in samples were qualitatively and quantitatively analyzed by gas chromatography-mass spectrometry(GC-MS)in selective ion scanning mode(SIM).[Results]The organophosphorus pesticide standard solutions showed good linearity in the mass concentration range of 0.1-10.0μg/ml with correlation coefficients(r)not lower than 0.999,and the detection limits(S=3 N)ranged from 0.01 to 0.05 mg/kg.The average recovery values were in the range of 80.2%-99.7%,with relative standard deviations(RSDs,n=3)in the range of 1.8%-6.3%,at the addition levels of 0.5,1.0 and 2.0 mg/kg.[Conclusions]The method is simple,sensitive and accurate,and can be used for the determination of organophosphorus pesticide residues in mutton.展开更多
Cystic lesions of the anterior mediastinum in children suggest a well-known group of benign lesions that are comparatively frequent.Thymic cysts(TCs)are mostly positioned in the anterior mediastinum and some patients ...Cystic lesions of the anterior mediastinum in children suggest a well-known group of benign lesions that are comparatively frequent.Thymic cysts(TCs)are mostly positioned in the anterior mediastinum and some patients in the neck.Benign TCs classified as congenital intra-thoracic mesothelial cysts are commonly asymptomatic and have slight clinical significance.Multilocular TC,which can mimic another anterior mediastinal cystic tumor and is seen in adults,is more clinically important.It is a sporadic mediastinal lesion thought to arise in the course of acquired inflammation.Congenital mediastinal cysts represent 3%-6%of all mediastinal tumors and 10%-18%of radiologically reported mediastinal masses.Mediastinal TCs are uncommon and it is hard to know their true incidence.About 60%of cases with mediastinal TCs are asymptomatic,and the remainder of patients complains of nonspecific symptoms(e.g.,chest pain,dyspnea,or cough).The literature suggests that most cysts are benign,but an indefinite percentage may have a neoplastic process and result in significant compressive symptoms over time.Clinical symptoms of TCs vary depending on the location.In addition,frequent symptoms at the appearance of enlarged benign thymic and mediastinal cysts generally contain compressive symptoms(e.g.,respiratory distress,thymic pain,and symptoms related to Horner syndrome,hoarseness,dysphonia,dyspnea,orthopnea,wheezing,and fever).Many TCs have cystic density and a neat border and are simple to diagnose with radiological imaging.However,some TCs are hard to identify before surgery and may be misidentified as thymomas depending on their site and computed tomography results.Excision by thoracotomy,median sternotomy,or video-assisted techniques is essential for conclusive diagnosis,management,and abolition of relapse of anterior mediastinal masses and TCs.Histopathologic examination may be required after surgery.Considering the extent of the mass and the preliminary inability to make a definitive diagnosis,en bloc excision of the cyst was thought to be preferred to circumvent likely complications(e.g.,perforation,spillage of the contents,or incomplete excision).展开更多
The Standard Model of particle physics assumes that fundamental fermions are point particles with zero radius, no spatial dimensions, and infinite matter density. This alternative model treats the nine charged fundame...The Standard Model of particle physics assumes that fundamental fermions are point particles with zero radius, no spatial dimensions, and infinite matter density. This alternative model treats the nine charged fundamental fermions (three leptons and nine quarks) as spheres with non-zero holographic radius. Holographic analysis (based on quantum mechanics, general relativity, thermodynamics, and Shannon information theory) specifies electron mass by five fundamental constants: Planck’s constant ℏ, gravitational constant G, fine structure constant α, cosmological constant Λ, and vacuum energy fraction ΩΛ. Protons and neutrons are composite systems of up and down quarks. Describing forces between quark constituents confined within nucleons as inverse square attractive forces, this alternative model identifies composition factors Cpand Cnto relate proton and neutron masses to electron mass and thus to fundamental constants. An appendix summarizes holographic analyses characterizing astronomical masses at the opposite end of the mass scale for objects in the universe.展开更多
Soft tissue tumors in the hand have a broad differential diagnosis. Included in the list of differential diagnoses for these tumors are Schwannomas, which are benign tumors within the peripheral nervous system [1]. Sc...Soft tissue tumors in the hand have a broad differential diagnosis. Included in the list of differential diagnoses for these tumors are Schwannomas, which are benign tumors within the peripheral nervous system [1]. Schwannomas are uncommon within the upper extremity, and they are exceedingly rare within the hand and wrist [1]. We describe a case of an 80-year-old female presented with a soft tissue mass within her right thumb. She underwent excisional biopsy of the mass, and pathology showed features consistent with schwannoma. She had resolution of her symptoms thereafter. We discuss the differential diagnosis for soft-tissue tumors in this location. When assessing patients with soft tissue tumors of the hand and wrist, it is important for the treating provider to maintain a broad differential diagnosis in order to facilitate appropriate management of these lesions.展开更多
This study develops an analytical model to evaluate the cooling performance of a porous terracotta tubular direct evaporative heat and mass exchanger. By combining energy and mass balance equations with heat and mass ...This study develops an analytical model to evaluate the cooling performance of a porous terracotta tubular direct evaporative heat and mass exchanger. By combining energy and mass balance equations with heat and mass transfer coefficients and air psychrometric correlations, the model provides insights into the impact of design and operational parameters on the exchanger cooling performance. Validated against an established numerical model, it accurately simulates cooling behavior with a Root Mean Square Deviation of 0.43 - 1.18˚C under varying inlet air conditions. The results show that tube geometry, including equivalent diameter, flatness ratio, and length significantly influences cooling outcomes. Smaller diameters enhance wet-bulb effectiveness but reduce cooling capacity, while increased flatness and length improve both. For example, extending the flatness ratio of a 15 mm diameter, 0.6 m long tube from 1 (circular) to 4 raises the exchange surface area from 0.028 to 0.037 m2, increasing wet-bulb effectiveness from 60% to 71%. Recommended diameters range from 5 mm for tubes under 0.5 m to 1 cm for tubes 0.5 to 1 m in length. Optimal air velocities depend on tube length: 1 m/s for tubes under 0.8 m, 1.5 m/s for lengths of 0.8 to 1.2 m, and up to 2 m/s for longer tubes. This model offers a practical alternative to complex numerical and CFD methods, with potential applications in cooling tower optimization for thermal and nuclear power plants and geothermal heat exchangers.展开更多
Multiple tuned mass dampers(MTMDs)reduce dynamic response with multiple specified frequencies of building structures.Many optimization algorithms for placement design exist,though they rarely conform to code-based ver...Multiple tuned mass dampers(MTMDs)reduce dynamic response with multiple specified frequencies of building structures.Many optimization algorithms for placement design exist,though they rarely conform to code-based verification nor produce high quality solutions without high computational effort and high complexity.This study proposes an inverse element exchange method(IEEM)with multi-level programming and compares it to a single tuned mass damper(STMD)and uniform distribution of multiple tuned mass dampers in the frequency and time domains.A ten-story shear building is used for the numerical case study.The results show that the proposed method can offer improvement over the STMD,uniform distribution of multiple tuned mass dampers,and distribution optimized by genetic algorithms(GA)with regard to minimizing the interstory drift ratio(IDR)in both the frequency and time domains and the time consumption for optimization.展开更多
Supplier selection in a mass customization environment is a systematic engineering,and Quality Function Deployment(QFD)based on customer demand is a systematic product development method.This paper studies the adaptab...Supplier selection in a mass customization environment is a systematic engineering,and Quality Function Deployment(QFD)based on customer demand is a systematic product development method.This paper studies the adaptability of the QFD method and supplier selection process in a mass customization environment and puts forward a supplier selection framework based on the QFD idea.Furthermore,both the objective environment of demand factor analysis and the thinking of the customer representatives participating in the analysis have great uncertainty and fuzziness.Therefore,a demand factor analysis method for supplier selection in the mass customization environment based on language phrases of different granularity is proposed.The proposed method allows the customer representatives participating in the selection to use their preferred language phrase set to represent the importance of demand factors.Finally,the effectiveness and feasibility of the proposed method are verified by an example of a vehicle manufacturer.展开更多
The isospin splitting of the Dirac mass obtained using the relativistic Brueckner-Hartree-Fock(RBHF)theory was thor-oughly investigated.From the perspective in the full Dirac space,the long-standing controversy betwee...The isospin splitting of the Dirac mass obtained using the relativistic Brueckner-Hartree-Fock(RBHF)theory was thor-oughly investigated.From the perspective in the full Dirac space,the long-standing controversy between the momentum-independent approximation(MIA)method and the projection method on the isospin splitting of the Dirac mass in asymmetric nuclear matter was analyzed in detail.We found that the assumption procedure of the MIA method,which assumes that single-particle potentials are momentum independent,is not a sufficient condition that directly leads to the opposite sign of the isospin splitting of the Dirac mass,whereas the extraction procedure of the MIA method,which extracts single-particle potentials from single-particle potential energy,changes the sign.A formal expression of the Dirac mass was obtained by approximately solving a set of equations involved in the extraction procedure.The opposite isospin splitting of the Dirac mass was mainly caused by the extraction procedure,which forcibly assumed that the momentum dependence of the single-particle potential energy was in a quadratic form,in which the strength was solely determined by a constant scalar potential.Improved understanding of the isospin splitting of the Dirac mass from ab initio calculations could enhance our knowledge of neutron-rich systems,such as exotic nuclei and neutron stars.展开更多
BACKGROUND Cardiovascular disease(CVD)and associated sequalae remain the leading cause of disability worldwide.Ischemic heart disease(IHD)and heart failure are the most common etiologies of morbidity and mortality wor...BACKGROUND Cardiovascular disease(CVD)and associated sequalae remain the leading cause of disability worldwide.Ischemic heart disease(IHD)and heart failure are the most common etiologies of morbidity and mortality worldwide.This is due to the poor diagnostic and management methods for heart failure and IHD.Early detection of related risk factors through modern strategies is underestimated and requires further research.AIM To interpret data from the published literature on volatile organic compounds(VOC),including all the methods used to analyze exhaled breath in patients with IHD and heart failure.METHODS Searches for specific keywords were performed on Scopus and PubMed.A total of 20 studies were identified in breath analysis and IHD and heart failure.The study is registered in PROSPERO(Registration No.CRD42023470556).RESULTS Considering the articles found,more research is required to gain a full understanding of the role of VOCs in IHD and heart failure.However,the existing literature demonstrates that cardiac metabolic changes can be expressed in exhaled air.The number of papers found is extremely low,making interpretation extremely difficult.CONCLUSION Exhaled breath analysis can be a novel biomarker for the diagnosis and prevention of heart failure and IHD.Exhaled breath analysis can be used as a mirror to reflect the metabolic changes related to IHD and heart failure.展开更多
The isospin asymmetry and quadrupole deformation value of drip-line nuclei are investigated using the Weizsäcker-Skyrme nuclear mass formula.We observe that for heavy nuclei at the neutron drip line,the Coulomb e...The isospin asymmetry and quadrupole deformation value of drip-line nuclei are investigated using the Weizsäcker-Skyrme nuclear mass formula.We observe that for heavy nuclei at the neutron drip line,the Coulomb energy heightened by an aug-mented charge could not be mitigated completely by symmetry energy because of isospin asymmetry saturation but is resisted complementally by strong nuclear deformation.The positions of saltation for the difference in proton numbers between two neighboring nuclei at the neutron drip line,and the isospin asymmetry of the neutron drip-line nucleus as a function of the neutron number distinctly correspond to the known magic numbers,which can serve as a reference to verify the undeter-mined neutron magic number.Through fitting of the binding energy difference between mirror nuclei(BEDbMN),a set of Coulomb energy coefficients with greater accuracy is obtained.A high-precision description of the BEDbMN is useful for accurately determining the experimentally unknown mass of the nucleus close to the proton drip line if the mass of its mirror nucleus is measured experimentally.展开更多
Combining the advantages of high efficiency,low-pressure drop,and large throughput,the pore arrayenhanced tube-in-tube microchannel(PA-TMC)is a promising microreactor for industrial applications.However,most of the ma...Combining the advantages of high efficiency,low-pressure drop,and large throughput,the pore arrayenhanced tube-in-tube microchannel(PA-TMC)is a promising microreactor for industrial applications.However,most of the mass transfer takes place in the upstream pore region,while the contribution of the downstream annulus is limited.In this work,helical wires were introduced into the annulus by adhering to the outer surface of the inner tube.Mixing behavior and mass transfer of liquideliquid twophase flow in PA-TMC with different helical wires have been systematically studied by a combination of experiments and volume of fluid(VOF)method.The introduction of helical wires improves the overall volumetric mass transfer coefficient KLa by up to 133%and the mass transfer efficiency E by up to 117%.The simulation results show that the helical wire brings extra phase mixing regions and increases the specific interface area,while accelerating the fluid flow and expanding the area of enhanced turbulent dissipation rate.Influences of helical wires in various configurations are compared by the comprehensive index I concerning the pressure drop and mass transfer performance simultaneously and a new correlation between KLa and specific energy consumption f is proposed.This research deepens the understanding of the mixing behavior and mass transfer in the PA-TMCs and provides practical experience for the process intensification of microchannel reactors.展开更多
BACKGROUND:This study aims to explore the causal relationship of body weight,body mass index(BMI),and waist circumference (WC) with the risk of cardiac arrest (CA) using two-sample Mendelian randomization (MR).METHODS...BACKGROUND:This study aims to explore the causal relationship of body weight,body mass index(BMI),and waist circumference (WC) with the risk of cardiac arrest (CA) using two-sample Mendelian randomization (MR).METHODS:Data were summarized using genome-wide association studies (GWAS).Twosample MR analyses were performed using the inverse variance weighting (IVW) method,the weighted median method,and the MR-Egger analysis.Heterogeneity test and sensitivity analysis were performed using Cochran’s Q test and the leave-one-out method,respectively.The Steiger test was used to detect reverse causality.Bayesian model-averaged MR was used to identify the most influential risk factors.RESULTS:A total of 13 GWAS data were collected for BMI,body weight and WC.IVW analyses showed a positive correlation of body weight,BMI,and WC with CA (all OR>1 and P<0.05),with MR-Egger and weighted median methods confirming the IVW findings.No horizontal pleiotropy or heterogeneity was observed.Sensitivity analysis indicated that no single nucleotide polymorphism(SNP) caused significant changes in overall causality.Bayesian model-averaged MR was also used to rank causality based on marginal inclusion probability (MIP),and the corresponding modelaveraged causal estimate (MACE) were confirmed,which indicated that WC (GWAS ID:ukb-b-9405)was the highest-ranked risk factor (MIP=0.119,MACE=0.011);its posterior probability was 0.057.A total of 14 sex-specific GWAS data on weight,BMI,and WC were analyzed in relationship with CA,and the MR results showed no significant effects of sex-specific factors.CONCLUSION:Body weight,BMI,and WC are causally associated with an increased risk of CA,with WC identified as the most important risk factor.展开更多
To guarantee safe and efficient tunneling of a tunnel boring machine(TBM),rapid and accurate judgment of the rock mass condition is essential.Based on fuzzy C-means clustering,this paper proposes a grouped machine lea...To guarantee safe and efficient tunneling of a tunnel boring machine(TBM),rapid and accurate judgment of the rock mass condition is essential.Based on fuzzy C-means clustering,this paper proposes a grouped machine learning method for predicting rock mass parameters.An elaborate data set on field rock mass is collected,which also matches field TBM tunneling.Meanwhile,target stratum samples are divided into several clusters by fuzzy C-means clustering,and multiple submodels are trained by samples in different clusters with the input of pretreated TBM tunneling data and the output of rock mass parameter data.Each testing sample or newly encountered tunneling condition can be predicted by multiple submodels with the weight of the membership degree of the sample to each cluster.The proposed method has been realized by 100 training samples and verified by 30 testing samples collected from the C1 part of the Pearl Delta water resources allocation project.The average percentage error of uniaxial compressive strength and joint frequency(Jf)of the 30 testing samples predicted by the pure back propagation(BP)neural network is 13.62%and 12.38%,while that predicted by the BP neural network combined with fuzzy C-means is 7.66%and6.40%,respectively.In addition,by combining fuzzy C-means clustering,the prediction accuracies of support vector regression and random forest are also improved to different degrees,which demonstrates that fuzzy C-means clustering is helpful for improving the prediction accuracy of machine learning and thus has good applicability.Accordingly,the proposed method is valuable for predicting rock mass parameters during TBM tunneling.展开更多
Accurately predicting the powder factor during blasting is essential for sustainable production planning in low-grade mines.This research presents a method for predicting powder factor based on the heterogeneity of ro...Accurately predicting the powder factor during blasting is essential for sustainable production planning in low-grade mines.This research presents a method for predicting powder factor based on the heterogeneity of rock mass rating(RMR).Considering a low-grade metal mine as an example,this study exploited geostatistical methods to obtain independent RMR for each block unit.A three-dimensional spatial distribution model for the powder factor was developed on the basis of the relationships between the RMR and the powder factor.Subsequently,models for blasting cost and mining value were built and employed to optimize the open-pit limit.The multi-variable model based on the RMR performed well in predicting the powder factor,achieving a correlation coefficient of 0.88(root mean square error of 4.3)and considerably outperforming the uniaxial compressive strength model.After model optimization,the mean size and standard deviation of the fragments in the blast pile decreased by 8.5%and 35.1%,respectively,whereas the boulder yield and its standard deviation decreased by 33.3%and 58.8%,respectively.Additionally,optimizing the open-pit limit using this method reduced the amount of rock,increased the amount of ore,and lowered blasting costs,thereby enhancing the economic efficiency of the mine.This study provides valuable insights for blasting design and mining decisions,demonstrating the advantages and potential applications of powder factor prediction based on the heterogeneity of rock mass quality.展开更多
Due to the influence of karst cave development and route selection,the location relationship between concealed karst cave and tunnel is more random.In order to explore the influence rule of karst cave location on the ...Due to the influence of karst cave development and route selection,the location relationship between concealed karst cave and tunnel is more random.In order to explore the influence rule of karst cave location on the minimum safe thickness of water-proof rock mass,a simplified calculation model of water-proof rock mass thickness when the karst cave is located at any location around the tunnel is established,and the influence of multiple factors on the overall stability of water-proof rock mass is considered.Based on the cusp catastrophe theory,the analytical expressions for the safety thickness of waterproof rock mass are derived.Based on the finite difference principle,the analytical expressions of the safety thickness of water-proof rock mass are verified.In order to improve the application range of the analytical formula derived in this paper,the analytical formula is optimized based on the instability principle differences between the simplified calculation model and the elastic compressive bar.The research results show that the necessary condition solution is more applicable and much safer than the sufficient condition solution.Tectonic stress,rock beam length and karst cave water pressure are significantly positively correlated with the safe thickness of the waterproof rock mass.The calculated results of the semioptimized formula and the unoptimized formula are constant values,independent of the karst cave location.While the calculated results of the fully optimized formula are variable values,correlated with the karst cave location,the thickness of the waterproof rock mass gradually decreases as the karst cave location moves from the top of the tunnel to the bottom of the tunnel.The unoptimized formula does not consider the influence of the lateral force of the rock beam,and is not suitable for the working condition with large lateral force,the calculation results of the semi-optimized formula and the fully optimized formula are not very different and are biased to safety,so it can be given priority.展开更多
This paper presents a dynamic modeling method to test and examine the minimum mass of pressurized pore-gas for triggering landslides in stable gentle soil slopes.A stable gentle soil slope model is constructed with a ...This paper presents a dynamic modeling method to test and examine the minimum mass of pressurized pore-gas for triggering landslides in stable gentle soil slopes.A stable gentle soil slope model is constructed with a dry cement powder core,a saturated clay middle layer,and a dry sand upper layer.The test injects H_(2)O_(2)solution into the cement core to produce new pore-gas.The model test includes three identical H_(2)O_(2)injections.The small mass of generated oxygen gas(0.07%of slope soil mass and landslide body)from the first injection can build sufficient pore-gas pressure to cause soil upheaval and slide.Meanwhile,despite the first injection causing leak paths in the clay layer,the generated small mass of gas from the second and third injections can further trigger the landslide.A dynamic theoretical analysis of the slope failure is carried out and the required minimum pore-gas pressure for the landslide is calculated.The mass and pressure of generated gas in the model test are also estimated based on the calibration test for oxygen generation from H_(2)O_(2)solution in cement powder.The results indicate that the minimum mass of the generated gas for triggering the landslide is 2 ppm to 0.07%of the landslide body.Furthermore,the small mass of gas can provide sufficient pressure to cause soil upheaval and soil sliding in dynamic analysis.展开更多
Glacier mass balance is a key indicator of glacier health and climate change sensitivity.Influencing factors include both climatic and nonclimatic elements,forming a complex set of drivers.There is a lack of quantitat...Glacier mass balance is a key indicator of glacier health and climate change sensitivity.Influencing factors include both climatic and nonclimatic elements,forming a complex set of drivers.There is a lack of quantitative analysis of these composite factors,particularly in climate-typical regions like the Tanggula Mountains on the central Tibetan Plateau.We collected data on various factors affecting glacier mass balance from 2000 to 2020,including climate variables,topographic variables,geometric parameters,and glacier dynamics.We utilized linear regression models,ensemble learning models,and Open Global Glacier Model(OGGM)to analyze glacier mass balance changes in the Tanggula Mountains.Results indicate that linear models explain 58%of the variance in glacier mass balance,with seasonal temperature and precipitation having significant impacts.Our findings show that ensemble learning models made the explanations 5.2%more accurate by including the impact of topographic and geometric factors such as the average glacier height,the slope of the glacier tongue,the speed of the ice flow,and the area of the glacier.Interpretable machine learning identified the spatial distribution of positive and negative impacts of these characteristics and the interaction between glacier topography and ice dynamics.Finally,we predicted the responses of glaciers of different sizes to future climate change based on the results of interpretable machine learning.It was found that relatively large glaciers(>1 km~2)are likely to persist until the end of this century under low emission scenarios,whereas small glaciers(<1 km~2)are expected to nearly disappear by 2080 under any emission scenario.Our research provides technical support for improving glacier change modeling and protection on the Tibetan Plateau.展开更多
In hilly regions,the existence of surface cracks in rock mass induces a potential threat to structural stability.Thus,the present research aims to explore the impact of surface cracks on the loadbearing capacity of st...In hilly regions,the existence of surface cracks in rock mass induces a potential threat to structural stability.Thus,the present research aims to explore the impact of surface cracks on the loadbearing capacity of strip footing placed on the rock mass.By taking into account the various boundary constraints across the surface of crack edges,the study investigates the presence of two categories of surface cracks,namely(1)separated crack,and(2)fine crack.The lower bound limit analysis is employed in conjunction with the finite element method(LBFELA)to conduct the numerical analysis.In order to evaluate rock mass yielding,the power conic programming(PCP)method is utilized to implement the generalized Hoek-Brown(GHB)failure criterion.The stability of the strip footing is analyzed by determining the bearing capacity factor(Nσγ),which is presented in the form of design charts by varying the strength parameters of rock,including the Geological Strength Index(GSI),Hoek-Brown material parameter(mi),Disturbance factor(D),and Normalised Uniaxial Compressive Strength(σci/γB),whereγis the unit weight of rock mass,and B is the width of strip footing.The study also investigates the impact of cracks on strip footings,considering different positions of the crack(LC)and depths of the crack(DC).The results demonstrate that the influence of the fine crack is only noticeable until the LC/B ratio reaches 6.However,for the separated crack,its impact remains significant even when the LC/B ratio exceeds 16.The appearance of fine crack at the edge of the footing results in a decrease in the magnitude Nσγof up to 45%,indicating a substantial reduction in the stability of the footing.The failure patterns are presented and discussed in detail for various cases in this study to examine the effect of surface cracks on the strip footing and to address the extent of the plastic collapse.展开更多
The compositions and distributions of monoterpenes,isoprene,aromatics and sesquiterpene SOA tracers(SOAM,SOAI,SOAA and SOAS,respectively)at an island site(Da Wan Shan Island,DWS)were investigated in the context of the...The compositions and distributions of monoterpenes,isoprene,aromatics and sesquiterpene SOA tracers(SOAM,SOAI,SOAA and SOAS,respectively)at an island site(Da Wan Shan Island,DWS)were investigated in the context of the influence of continental and marine air masses over the Pearl River Estuary(PRE)region in winter 2021.The sum concentration of SOA tracers was 6.2–132.8 ng m^(−3),with SOAM and SOAI as the main components in both continental(scenarios A1 and A2)and marine air masses(scenario A3),as well as their combination(scenario A4).The highest and lowest levels of SOAM were observed in A1 and A3,respectively,which were mainly related to the variations in meteorological conditions,precursor concentrations,and the degree of photochemical processes.Higher MBTCA/HGA(3-methyl-1,2,3-butanetricarboxylic acid/3-hydroxyglutaric acid)ratios suggested a less significant contribution fromα-pinene to SOAM.The variations of SOAI in the different scenarios were associated with differences in relative humidity,particle acidity,and isoprene/NOx ratios.The respective highest and lowest concentrations of aromatics SOA tracers in A1 and A3 revealed the influence of anthropogenic precursors from upwind continental areas,which was confirmed by the correlation among biogenic and anthropogenic precursors.The results of the tracer-based-method suggested dominant contributions of SOAs from aromatics and monoterpenes,with the highest concentrations in A1.A WRF-Chem simulation revealed that the SOAs from the above precursors only contributed 12%–25%to the total SOA at DWS,while the spatial distributions of SOAs further highlighted that the abundance of SOAs over the PRE region in winter is highly associated with air masses transported from upwind continental areas.展开更多
The transition of hydrogen sourcing from carbon-intensive to water-based methodologies is underway,with renewable energy-powered proton exchange membrane water electrolysis(PEMWE)emerging as the preeminent pathway for...The transition of hydrogen sourcing from carbon-intensive to water-based methodologies is underway,with renewable energy-powered proton exchange membrane water electrolysis(PEMWE)emerging as the preeminent pathway for hydrogen production.Despite remarkable advancements in this field,confronting the sluggish electrochemical kinetics and inherent high-energy consumption arising from deteriorated mass transport within PEMWE systems remains a formidable obstacle.This impediment stems primarily from the hindered protons mass transfer and the untimely hydrogen bubbles detachment.To address these challenges,we harness the inherent variability of electrical energy and introduce an innovative pulsed dynamic water electrolysis system.Compared to constant voltage electrolysis(hydrogen production rate:51.6 m L h^(-1),energy consumption:5.37 kWh Nm-^(3)H_(2)),this strategy(hydrogen production rate:66 m L h^(-1),energy consumption:3.83 kWh Nm-^(3)H_(2))increases the hydrogen production rate by approximately 27%and reduces the energy consumption by about 28%.Furthermore,we demonstrate the practicality of this system by integrating it with an off-grid photovoltaic(PV)system designed for outdoor operation,successfully driving a hydrogen production current of up to 500 mA under an average voltage of approximately 2 V.The combined results of in-situ characterization and finite element analysis reveal the performance enhancement mechanism:pulsed dynamic electrolysis(PDE)dramatically accelerates the enrichment of protons at the electrode/solution interface and facilitates the release of bubbles on the electrode surface.As such,PDE-enhanced PEMWE represents a synergistic advancement,concurrently enhancing both the hydrogen generation reaction and associated transport processes.This promising technology not only redefines the landscape of electrolysis-based hydrogen production but also holds immense potential for broadening its application across a diverse spectrum of electrocatalytic endeavors.展开更多
基金Supported by The Fourth Batch of High-end Talent Project in Hebei Province.
文摘[Objectives]This study was conducted to purify mutton samples by gel permeation chromatography(GPC).[Methods]Fourteen organophosphorus pesticide residues in samples were qualitatively and quantitatively analyzed by gas chromatography-mass spectrometry(GC-MS)in selective ion scanning mode(SIM).[Results]The organophosphorus pesticide standard solutions showed good linearity in the mass concentration range of 0.1-10.0μg/ml with correlation coefficients(r)not lower than 0.999,and the detection limits(S=3 N)ranged from 0.01 to 0.05 mg/kg.The average recovery values were in the range of 80.2%-99.7%,with relative standard deviations(RSDs,n=3)in the range of 1.8%-6.3%,at the addition levels of 0.5,1.0 and 2.0 mg/kg.[Conclusions]The method is simple,sensitive and accurate,and can be used for the determination of organophosphorus pesticide residues in mutton.
文摘Cystic lesions of the anterior mediastinum in children suggest a well-known group of benign lesions that are comparatively frequent.Thymic cysts(TCs)are mostly positioned in the anterior mediastinum and some patients in the neck.Benign TCs classified as congenital intra-thoracic mesothelial cysts are commonly asymptomatic and have slight clinical significance.Multilocular TC,which can mimic another anterior mediastinal cystic tumor and is seen in adults,is more clinically important.It is a sporadic mediastinal lesion thought to arise in the course of acquired inflammation.Congenital mediastinal cysts represent 3%-6%of all mediastinal tumors and 10%-18%of radiologically reported mediastinal masses.Mediastinal TCs are uncommon and it is hard to know their true incidence.About 60%of cases with mediastinal TCs are asymptomatic,and the remainder of patients complains of nonspecific symptoms(e.g.,chest pain,dyspnea,or cough).The literature suggests that most cysts are benign,but an indefinite percentage may have a neoplastic process and result in significant compressive symptoms over time.Clinical symptoms of TCs vary depending on the location.In addition,frequent symptoms at the appearance of enlarged benign thymic and mediastinal cysts generally contain compressive symptoms(e.g.,respiratory distress,thymic pain,and symptoms related to Horner syndrome,hoarseness,dysphonia,dyspnea,orthopnea,wheezing,and fever).Many TCs have cystic density and a neat border and are simple to diagnose with radiological imaging.However,some TCs are hard to identify before surgery and may be misidentified as thymomas depending on their site and computed tomography results.Excision by thoracotomy,median sternotomy,or video-assisted techniques is essential for conclusive diagnosis,management,and abolition of relapse of anterior mediastinal masses and TCs.Histopathologic examination may be required after surgery.Considering the extent of the mass and the preliminary inability to make a definitive diagnosis,en bloc excision of the cyst was thought to be preferred to circumvent likely complications(e.g.,perforation,spillage of the contents,or incomplete excision).
文摘The Standard Model of particle physics assumes that fundamental fermions are point particles with zero radius, no spatial dimensions, and infinite matter density. This alternative model treats the nine charged fundamental fermions (three leptons and nine quarks) as spheres with non-zero holographic radius. Holographic analysis (based on quantum mechanics, general relativity, thermodynamics, and Shannon information theory) specifies electron mass by five fundamental constants: Planck’s constant ℏ, gravitational constant G, fine structure constant α, cosmological constant Λ, and vacuum energy fraction ΩΛ. Protons and neutrons are composite systems of up and down quarks. Describing forces between quark constituents confined within nucleons as inverse square attractive forces, this alternative model identifies composition factors Cpand Cnto relate proton and neutron masses to electron mass and thus to fundamental constants. An appendix summarizes holographic analyses characterizing astronomical masses at the opposite end of the mass scale for objects in the universe.
文摘Soft tissue tumors in the hand have a broad differential diagnosis. Included in the list of differential diagnoses for these tumors are Schwannomas, which are benign tumors within the peripheral nervous system [1]. Schwannomas are uncommon within the upper extremity, and they are exceedingly rare within the hand and wrist [1]. We describe a case of an 80-year-old female presented with a soft tissue mass within her right thumb. She underwent excisional biopsy of the mass, and pathology showed features consistent with schwannoma. She had resolution of her symptoms thereafter. We discuss the differential diagnosis for soft-tissue tumors in this location. When assessing patients with soft tissue tumors of the hand and wrist, it is important for the treating provider to maintain a broad differential diagnosis in order to facilitate appropriate management of these lesions.
文摘This study develops an analytical model to evaluate the cooling performance of a porous terracotta tubular direct evaporative heat and mass exchanger. By combining energy and mass balance equations with heat and mass transfer coefficients and air psychrometric correlations, the model provides insights into the impact of design and operational parameters on the exchanger cooling performance. Validated against an established numerical model, it accurately simulates cooling behavior with a Root Mean Square Deviation of 0.43 - 1.18˚C under varying inlet air conditions. The results show that tube geometry, including equivalent diameter, flatness ratio, and length significantly influences cooling outcomes. Smaller diameters enhance wet-bulb effectiveness but reduce cooling capacity, while increased flatness and length improve both. For example, extending the flatness ratio of a 15 mm diameter, 0.6 m long tube from 1 (circular) to 4 raises the exchange surface area from 0.028 to 0.037 m2, increasing wet-bulb effectiveness from 60% to 71%. Recommended diameters range from 5 mm for tubes under 0.5 m to 1 cm for tubes 0.5 to 1 m in length. Optimal air velocities depend on tube length: 1 m/s for tubes under 0.8 m, 1.5 m/s for lengths of 0.8 to 1.2 m, and up to 2 m/s for longer tubes. This model offers a practical alternative to complex numerical and CFD methods, with potential applications in cooling tower optimization for thermal and nuclear power plants and geothermal heat exchangers.
文摘Multiple tuned mass dampers(MTMDs)reduce dynamic response with multiple specified frequencies of building structures.Many optimization algorithms for placement design exist,though they rarely conform to code-based verification nor produce high quality solutions without high computational effort and high complexity.This study proposes an inverse element exchange method(IEEM)with multi-level programming and compares it to a single tuned mass damper(STMD)and uniform distribution of multiple tuned mass dampers in the frequency and time domains.A ten-story shear building is used for the numerical case study.The results show that the proposed method can offer improvement over the STMD,uniform distribution of multiple tuned mass dampers,and distribution optimized by genetic algorithms(GA)with regard to minimizing the interstory drift ratio(IDR)in both the frequency and time domains and the time consumption for optimization.
文摘Supplier selection in a mass customization environment is a systematic engineering,and Quality Function Deployment(QFD)based on customer demand is a systematic product development method.This paper studies the adaptability of the QFD method and supplier selection process in a mass customization environment and puts forward a supplier selection framework based on the QFD idea.Furthermore,both the objective environment of demand factor analysis and the thinking of the customer representatives participating in the analysis have great uncertainty and fuzziness.Therefore,a demand factor analysis method for supplier selection in the mass customization environment based on language phrases of different granularity is proposed.The proposed method allows the customer representatives participating in the selection to use their preferred language phrase set to represent the importance of demand factors.Finally,the effectiveness and feasibility of the proposed method are verified by an example of a vehicle manufacturer.
基金supported in part by the China Postdoctoral Science Foundation under grant No.2021M700610the National Natural Science Foundation of China(NSFC)(No.12205030)+1 种基金the Fundamental Research Funds for the Central Universities(No.2024CDJXY022)the Institute for Basic Science(No.IBS-R031-D1).
文摘The isospin splitting of the Dirac mass obtained using the relativistic Brueckner-Hartree-Fock(RBHF)theory was thor-oughly investigated.From the perspective in the full Dirac space,the long-standing controversy between the momentum-independent approximation(MIA)method and the projection method on the isospin splitting of the Dirac mass in asymmetric nuclear matter was analyzed in detail.We found that the assumption procedure of the MIA method,which assumes that single-particle potentials are momentum independent,is not a sufficient condition that directly leads to the opposite sign of the isospin splitting of the Dirac mass,whereas the extraction procedure of the MIA method,which extracts single-particle potentials from single-particle potential energy,changes the sign.A formal expression of the Dirac mass was obtained by approximately solving a set of equations involved in the extraction procedure.The opposite isospin splitting of the Dirac mass was mainly caused by the extraction procedure,which forcibly assumed that the momentum dependence of the single-particle potential energy was in a quadratic form,in which the strength was solely determined by a constant scalar potential.Improved understanding of the isospin splitting of the Dirac mass from ab initio calculations could enhance our knowledge of neutron-rich systems,such as exotic nuclei and neutron stars.
基金Supported by the Government Assignment to Philipp Kopylov,No.1023022600020-6Russian Science Foundation Grant to Philipp Kopylov,No.24-15-00549the Ministry of Science and Higher Education of the Russian Federation within the Framework of State Support for the Creation and Development of World-Class Research Center to Basheer Marzoog and Peter Chomakhidze,No.075-15-2022-304.
文摘BACKGROUND Cardiovascular disease(CVD)and associated sequalae remain the leading cause of disability worldwide.Ischemic heart disease(IHD)and heart failure are the most common etiologies of morbidity and mortality worldwide.This is due to the poor diagnostic and management methods for heart failure and IHD.Early detection of related risk factors through modern strategies is underestimated and requires further research.AIM To interpret data from the published literature on volatile organic compounds(VOC),including all the methods used to analyze exhaled breath in patients with IHD and heart failure.METHODS Searches for specific keywords were performed on Scopus and PubMed.A total of 20 studies were identified in breath analysis and IHD and heart failure.The study is registered in PROSPERO(Registration No.CRD42023470556).RESULTS Considering the articles found,more research is required to gain a full understanding of the role of VOCs in IHD and heart failure.However,the existing literature demonstrates that cardiac metabolic changes can be expressed in exhaled air.The number of papers found is extremely low,making interpretation extremely difficult.CONCLUSION Exhaled breath analysis can be a novel biomarker for the diagnosis and prevention of heart failure and IHD.Exhaled breath analysis can be used as a mirror to reflect the metabolic changes related to IHD and heart failure.
基金supported by the Ministry of Science and Technology of China(No.2022YFE0103400)Natural Science Foundation of Guangxi Province(No.2021GXNSFAA196052)National Natural Science Foundation of China(No.11965004).
文摘The isospin asymmetry and quadrupole deformation value of drip-line nuclei are investigated using the Weizsäcker-Skyrme nuclear mass formula.We observe that for heavy nuclei at the neutron drip line,the Coulomb energy heightened by an aug-mented charge could not be mitigated completely by symmetry energy because of isospin asymmetry saturation but is resisted complementally by strong nuclear deformation.The positions of saltation for the difference in proton numbers between two neighboring nuclei at the neutron drip line,and the isospin asymmetry of the neutron drip-line nucleus as a function of the neutron number distinctly correspond to the known magic numbers,which can serve as a reference to verify the undeter-mined neutron magic number.Through fitting of the binding energy difference between mirror nuclei(BEDbMN),a set of Coulomb energy coefficients with greater accuracy is obtained.A high-precision description of the BEDbMN is useful for accurately determining the experimentally unknown mass of the nucleus close to the proton drip line if the mass of its mirror nucleus is measured experimentally.
基金the National Natural Science Foundation of China(22208320)the Science and Technology Program of Henan Province(212102210044)The Henan Association for Science and Technology Youth Talent Support Program(2022HYTP026).
文摘Combining the advantages of high efficiency,low-pressure drop,and large throughput,the pore arrayenhanced tube-in-tube microchannel(PA-TMC)is a promising microreactor for industrial applications.However,most of the mass transfer takes place in the upstream pore region,while the contribution of the downstream annulus is limited.In this work,helical wires were introduced into the annulus by adhering to the outer surface of the inner tube.Mixing behavior and mass transfer of liquideliquid twophase flow in PA-TMC with different helical wires have been systematically studied by a combination of experiments and volume of fluid(VOF)method.The introduction of helical wires improves the overall volumetric mass transfer coefficient KLa by up to 133%and the mass transfer efficiency E by up to 117%.The simulation results show that the helical wire brings extra phase mixing regions and increases the specific interface area,while accelerating the fluid flow and expanding the area of enhanced turbulent dissipation rate.Influences of helical wires in various configurations are compared by the comprehensive index I concerning the pressure drop and mass transfer performance simultaneously and a new correlation between KLa and specific energy consumption f is proposed.This research deepens the understanding of the mixing behavior and mass transfer in the PA-TMCs and provides practical experience for the process intensification of microchannel reactors.
基金This study is supported by the National Natural Science Foundation of China (No. 82072127)。
文摘BACKGROUND:This study aims to explore the causal relationship of body weight,body mass index(BMI),and waist circumference (WC) with the risk of cardiac arrest (CA) using two-sample Mendelian randomization (MR).METHODS:Data were summarized using genome-wide association studies (GWAS).Twosample MR analyses were performed using the inverse variance weighting (IVW) method,the weighted median method,and the MR-Egger analysis.Heterogeneity test and sensitivity analysis were performed using Cochran’s Q test and the leave-one-out method,respectively.The Steiger test was used to detect reverse causality.Bayesian model-averaged MR was used to identify the most influential risk factors.RESULTS:A total of 13 GWAS data were collected for BMI,body weight and WC.IVW analyses showed a positive correlation of body weight,BMI,and WC with CA (all OR>1 and P<0.05),with MR-Egger and weighted median methods confirming the IVW findings.No horizontal pleiotropy or heterogeneity was observed.Sensitivity analysis indicated that no single nucleotide polymorphism(SNP) caused significant changes in overall causality.Bayesian model-averaged MR was also used to rank causality based on marginal inclusion probability (MIP),and the corresponding modelaveraged causal estimate (MACE) were confirmed,which indicated that WC (GWAS ID:ukb-b-9405)was the highest-ranked risk factor (MIP=0.119,MACE=0.011);its posterior probability was 0.057.A total of 14 sex-specific GWAS data on weight,BMI,and WC were analyzed in relationship with CA,and the MR results showed no significant effects of sex-specific factors.CONCLUSION:Body weight,BMI,and WC are causally associated with an increased risk of CA,with WC identified as the most important risk factor.
基金Natural Science Foundation of Shandong Province,Grant/Award Number:ZR202103010903Doctoral Fund of Shandong Jianzhu University,Grant/Award Number:X21101Z。
文摘To guarantee safe and efficient tunneling of a tunnel boring machine(TBM),rapid and accurate judgment of the rock mass condition is essential.Based on fuzzy C-means clustering,this paper proposes a grouped machine learning method for predicting rock mass parameters.An elaborate data set on field rock mass is collected,which also matches field TBM tunneling.Meanwhile,target stratum samples are divided into several clusters by fuzzy C-means clustering,and multiple submodels are trained by samples in different clusters with the input of pretreated TBM tunneling data and the output of rock mass parameter data.Each testing sample or newly encountered tunneling condition can be predicted by multiple submodels with the weight of the membership degree of the sample to each cluster.The proposed method has been realized by 100 training samples and verified by 30 testing samples collected from the C1 part of the Pearl Delta water resources allocation project.The average percentage error of uniaxial compressive strength and joint frequency(Jf)of the 30 testing samples predicted by the pure back propagation(BP)neural network is 13.62%and 12.38%,while that predicted by the BP neural network combined with fuzzy C-means is 7.66%and6.40%,respectively.In addition,by combining fuzzy C-means clustering,the prediction accuracies of support vector regression and random forest are also improved to different degrees,which demonstrates that fuzzy C-means clustering is helpful for improving the prediction accuracy of machine learning and thus has good applicability.Accordingly,the proposed method is valuable for predicting rock mass parameters during TBM tunneling.
基金supported by the National Key Research and Development Program of China(No.2022YFC2903902)the National Natural Science Foundation of China(Nos.52204080and 52174070)the Fundamental Research Funds for the Central Universities of China(No.2023GFYD17)。
文摘Accurately predicting the powder factor during blasting is essential for sustainable production planning in low-grade mines.This research presents a method for predicting powder factor based on the heterogeneity of rock mass rating(RMR).Considering a low-grade metal mine as an example,this study exploited geostatistical methods to obtain independent RMR for each block unit.A three-dimensional spatial distribution model for the powder factor was developed on the basis of the relationships between the RMR and the powder factor.Subsequently,models for blasting cost and mining value were built and employed to optimize the open-pit limit.The multi-variable model based on the RMR performed well in predicting the powder factor,achieving a correlation coefficient of 0.88(root mean square error of 4.3)and considerably outperforming the uniaxial compressive strength model.After model optimization,the mean size and standard deviation of the fragments in the blast pile decreased by 8.5%and 35.1%,respectively,whereas the boulder yield and its standard deviation decreased by 33.3%and 58.8%,respectively.Additionally,optimizing the open-pit limit using this method reduced the amount of rock,increased the amount of ore,and lowered blasting costs,thereby enhancing the economic efficiency of the mine.This study provides valuable insights for blasting design and mining decisions,demonstrating the advantages and potential applications of powder factor prediction based on the heterogeneity of rock mass quality.
基金jointly funded by the guangxi Science and Technology Base and Talent Project(AD23026104)the Key Research and Development Program Project in Guangxi(AB23026121)。
文摘Due to the influence of karst cave development and route selection,the location relationship between concealed karst cave and tunnel is more random.In order to explore the influence rule of karst cave location on the minimum safe thickness of water-proof rock mass,a simplified calculation model of water-proof rock mass thickness when the karst cave is located at any location around the tunnel is established,and the influence of multiple factors on the overall stability of water-proof rock mass is considered.Based on the cusp catastrophe theory,the analytical expressions for the safety thickness of waterproof rock mass are derived.Based on the finite difference principle,the analytical expressions of the safety thickness of water-proof rock mass are verified.In order to improve the application range of the analytical formula derived in this paper,the analytical formula is optimized based on the instability principle differences between the simplified calculation model and the elastic compressive bar.The research results show that the necessary condition solution is more applicable and much safer than the sufficient condition solution.Tectonic stress,rock beam length and karst cave water pressure are significantly positively correlated with the safe thickness of the waterproof rock mass.The calculated results of the semioptimized formula and the unoptimized formula are constant values,independent of the karst cave location.While the calculated results of the fully optimized formula are variable values,correlated with the karst cave location,the thickness of the waterproof rock mass gradually decreases as the karst cave location moves from the top of the tunnel to the bottom of the tunnel.The unoptimized formula does not consider the influence of the lateral force of the rock beam,and is not suitable for the working condition with large lateral force,the calculation results of the semi-optimized formula and the fully optimized formula are not very different and are biased to safety,so it can be given priority.
基金supported by grants from the Research Grant Council of the Hong Kong Special Administrative Region,China(Project No.HKU 17207518).
文摘This paper presents a dynamic modeling method to test and examine the minimum mass of pressurized pore-gas for triggering landslides in stable gentle soil slopes.A stable gentle soil slope model is constructed with a dry cement powder core,a saturated clay middle layer,and a dry sand upper layer.The test injects H_(2)O_(2)solution into the cement core to produce new pore-gas.The model test includes three identical H_(2)O_(2)injections.The small mass of generated oxygen gas(0.07%of slope soil mass and landslide body)from the first injection can build sufficient pore-gas pressure to cause soil upheaval and slide.Meanwhile,despite the first injection causing leak paths in the clay layer,the generated small mass of gas from the second and third injections can further trigger the landslide.A dynamic theoretical analysis of the slope failure is carried out and the required minimum pore-gas pressure for the landslide is calculated.The mass and pressure of generated gas in the model test are also estimated based on the calibration test for oxygen generation from H_(2)O_(2)solution in cement powder.The results indicate that the minimum mass of the generated gas for triggering the landslide is 2 ppm to 0.07%of the landslide body.Furthermore,the small mass of gas can provide sufficient pressure to cause soil upheaval and soil sliding in dynamic analysis.
基金funding from the National Key Research and Development Program of China(2023YFC3206300)the Gansu Provincial Science and Technology Program(22ZD6FA005)+2 种基金the Gansu Youth Science and Technology Fund(E4310103)the Gansu Postdoctoral Science Foundation(E339880112)the Tibet Science and Technology Program(XZ202301ZY0001G and XZ202401JD0007)。
文摘Glacier mass balance is a key indicator of glacier health and climate change sensitivity.Influencing factors include both climatic and nonclimatic elements,forming a complex set of drivers.There is a lack of quantitative analysis of these composite factors,particularly in climate-typical regions like the Tanggula Mountains on the central Tibetan Plateau.We collected data on various factors affecting glacier mass balance from 2000 to 2020,including climate variables,topographic variables,geometric parameters,and glacier dynamics.We utilized linear regression models,ensemble learning models,and Open Global Glacier Model(OGGM)to analyze glacier mass balance changes in the Tanggula Mountains.Results indicate that linear models explain 58%of the variance in glacier mass balance,with seasonal temperature and precipitation having significant impacts.Our findings show that ensemble learning models made the explanations 5.2%more accurate by including the impact of topographic and geometric factors such as the average glacier height,the slope of the glacier tongue,the speed of the ice flow,and the area of the glacier.Interpretable machine learning identified the spatial distribution of positive and negative impacts of these characteristics and the interaction between glacier topography and ice dynamics.Finally,we predicted the responses of glaciers of different sizes to future climate change based on the results of interpretable machine learning.It was found that relatively large glaciers(>1 km~2)are likely to persist until the end of this century under low emission scenarios,whereas small glaciers(<1 km~2)are expected to nearly disappear by 2080 under any emission scenario.Our research provides technical support for improving glacier change modeling and protection on the Tibetan Plateau.
基金supported by the Centre for Development of Advanced Computing (CDAC), Pune
文摘In hilly regions,the existence of surface cracks in rock mass induces a potential threat to structural stability.Thus,the present research aims to explore the impact of surface cracks on the loadbearing capacity of strip footing placed on the rock mass.By taking into account the various boundary constraints across the surface of crack edges,the study investigates the presence of two categories of surface cracks,namely(1)separated crack,and(2)fine crack.The lower bound limit analysis is employed in conjunction with the finite element method(LBFELA)to conduct the numerical analysis.In order to evaluate rock mass yielding,the power conic programming(PCP)method is utilized to implement the generalized Hoek-Brown(GHB)failure criterion.The stability of the strip footing is analyzed by determining the bearing capacity factor(Nσγ),which is presented in the form of design charts by varying the strength parameters of rock,including the Geological Strength Index(GSI),Hoek-Brown material parameter(mi),Disturbance factor(D),and Normalised Uniaxial Compressive Strength(σci/γB),whereγis the unit weight of rock mass,and B is the width of strip footing.The study also investigates the impact of cracks on strip footings,considering different positions of the crack(LC)and depths of the crack(DC).The results demonstrate that the influence of the fine crack is only noticeable until the LC/B ratio reaches 6.However,for the separated crack,its impact remains significant even when the LC/B ratio exceeds 16.The appearance of fine crack at the edge of the footing results in a decrease in the magnitude Nσγof up to 45%,indicating a substantial reduction in the stability of the footing.The failure patterns are presented and discussed in detail for various cases in this study to examine the effect of surface cracks on the strip footing and to address the extent of the plastic collapse.
基金supported by the State Key Program of the National Natural Science Foundation of China(Grant Nos.42230701,91644215)the National Natural ScienceFoundation of China(Grant Nos.42122062 and 42307137)+3 种基金the Guangdong Basic and Applied Basic Research Foundation(Grant No.2022A1515010852)the Fundamental Research Funds for the Central Universities,Sun Yat-sen University(Grant No.23hytd002)the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(Grant No.SML2023SP218)L.M.acknowledges the Zhuhai Science and Technology Plan Project(Grant No.ZH22036201210115PWC).
文摘The compositions and distributions of monoterpenes,isoprene,aromatics and sesquiterpene SOA tracers(SOAM,SOAI,SOAA and SOAS,respectively)at an island site(Da Wan Shan Island,DWS)were investigated in the context of the influence of continental and marine air masses over the Pearl River Estuary(PRE)region in winter 2021.The sum concentration of SOA tracers was 6.2–132.8 ng m^(−3),with SOAM and SOAI as the main components in both continental(scenarios A1 and A2)and marine air masses(scenario A3),as well as their combination(scenario A4).The highest and lowest levels of SOAM were observed in A1 and A3,respectively,which were mainly related to the variations in meteorological conditions,precursor concentrations,and the degree of photochemical processes.Higher MBTCA/HGA(3-methyl-1,2,3-butanetricarboxylic acid/3-hydroxyglutaric acid)ratios suggested a less significant contribution fromα-pinene to SOAM.The variations of SOAI in the different scenarios were associated with differences in relative humidity,particle acidity,and isoprene/NOx ratios.The respective highest and lowest concentrations of aromatics SOA tracers in A1 and A3 revealed the influence of anthropogenic precursors from upwind continental areas,which was confirmed by the correlation among biogenic and anthropogenic precursors.The results of the tracer-based-method suggested dominant contributions of SOAs from aromatics and monoterpenes,with the highest concentrations in A1.A WRF-Chem simulation revealed that the SOAs from the above precursors only contributed 12%–25%to the total SOA at DWS,while the spatial distributions of SOAs further highlighted that the abundance of SOAs over the PRE region in winter is highly associated with air masses transported from upwind continental areas.
基金National Natural Science Foundation of China(No.52476192,No.52106237)Natural Science Foundation of Heilongjiang Province(No.YQ2022E027)。
文摘The transition of hydrogen sourcing from carbon-intensive to water-based methodologies is underway,with renewable energy-powered proton exchange membrane water electrolysis(PEMWE)emerging as the preeminent pathway for hydrogen production.Despite remarkable advancements in this field,confronting the sluggish electrochemical kinetics and inherent high-energy consumption arising from deteriorated mass transport within PEMWE systems remains a formidable obstacle.This impediment stems primarily from the hindered protons mass transfer and the untimely hydrogen bubbles detachment.To address these challenges,we harness the inherent variability of electrical energy and introduce an innovative pulsed dynamic water electrolysis system.Compared to constant voltage electrolysis(hydrogen production rate:51.6 m L h^(-1),energy consumption:5.37 kWh Nm-^(3)H_(2)),this strategy(hydrogen production rate:66 m L h^(-1),energy consumption:3.83 kWh Nm-^(3)H_(2))increases the hydrogen production rate by approximately 27%and reduces the energy consumption by about 28%.Furthermore,we demonstrate the practicality of this system by integrating it with an off-grid photovoltaic(PV)system designed for outdoor operation,successfully driving a hydrogen production current of up to 500 mA under an average voltage of approximately 2 V.The combined results of in-situ characterization and finite element analysis reveal the performance enhancement mechanism:pulsed dynamic electrolysis(PDE)dramatically accelerates the enrichment of protons at the electrode/solution interface and facilitates the release of bubbles on the electrode surface.As such,PDE-enhanced PEMWE represents a synergistic advancement,concurrently enhancing both the hydrogen generation reaction and associated transport processes.This promising technology not only redefines the landscape of electrolysis-based hydrogen production but also holds immense potential for broadening its application across a diverse spectrum of electrocatalytic endeavors.
