For real-time dynamic substructure testing(RTDST),the influence of the inertia force of fluid specimens on the stability and accuracy of the integration algorithms has never been investigated.Therefore,this study prop...For real-time dynamic substructure testing(RTDST),the influence of the inertia force of fluid specimens on the stability and accuracy of the integration algorithms has never been investigated.Therefore,this study proposes to investigate the stability and accuracy of the central difference method(CDM)for RTDST considering the specimen mass participation coefficient.First,the theory of the CDM for RTDST is presented.Next,the stability and accuracy of the CDM for RTDST considering the specimen mass participation coefficient are investigated.Finally,numerical simulations and experimental tests are conducted for verifying the effectiveness of the method.The study indicates that the stability of the algorithm is affected by the mass participation coefficient of the specimen,and the stability limit first increases and then decreases as the mass participation coefficient increases.In most cases,the mass participation coefficient will increase the stability limit of the algorithm,but in specific circumstances,the algorithm may lose its stability.The stability and accuracy of the CDM considering the mass participation coefficient are verified by numerical simulations and experimental tests on a three-story frame structure with a tuned liquid damper.展开更多
Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the tr...Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the transient flow,it is necessary to establish a transient hydraulic-thermal simulation model in order to determine the venting time.In this paper,based on two kinds of venting scenarios in which there is only one venting point in the venting system of a gas trunk pipeline segment—namely,where the venting point is either at one of the two ends or at the junction of two gas trunk pipeline segments—transient hydraulic-thermal simulation models are established.The models consist of gas flow governing equations,the gas state equation,gas physical property equations,initial conditions,and appropriate boundary conditions.The implicit central difference method is used to discretize the gas flow partial differential equations,and the trust-region-dogleg algorithm is used to solve the equations corresponding to each time step,in order to dynamically simulate the whole venting process.The judgment condition for the end of the venting process is that the average pressure of gas trunk pipeline segment is less than 0.11 MPa(actual pressure).Comparing the simulation results of the proposed model with those of the OLGA software and real operational data,we find that the venting time error is less than 10%.On this basis,a venting valve opening control principle is proposed,which prevents the venting noise from exceeded the specified noise value(85 d B)in the venting design of domestic gas pipeline projects.The established calculation model for venting time(dynamic simulation model)for a gas trunk pipeline segment and the proposed opening control principle of venting valve provide reference for the optimal operation of gas pipeline venting systems.展开更多
In the practical problems such as nuclear waste pollution and seawater intrusion etc., many problems are reduced to solving the convection-diffusion equation, so the research of convection-diffusion equation is of gre...In the practical problems such as nuclear waste pollution and seawater intrusion etc., many problems are reduced to solving the convection-diffusion equation, so the research of convection-diffusion equation is of great value. In this work, a spectral method is presented for solving one and two dimensional convection-diffusion equation with source term. The finite difference method is also used to solve the convection diffusion equation. The numerical experiments show that the spectral method is more efficient than other methods for solving the convection-diffusion equation.展开更多
The dynamic contact behavior of worn bearings with elastoplastic functionally graded coating is studied,and the interacting effect between worn band and functionally graded surface is analyzed.The surface deformation ...The dynamic contact behavior of worn bearings with elastoplastic functionally graded coating is studied,and the interacting effect between worn band and functionally graded surface is analyzed.The surface deformation and roughness are included in the film thickness.The mixed elastohydrodynamic lubrication combined with point contact model is introduced to analyze the oil pressure in the contact zone.By using the Fourier transform method and Papkovich-Neuber potential function,the displacements and stress fields in the elastoplastic functionally graded coating are obtained.The second-order central difference method is used to solve the Reynolds equation.It is found that the repeated surface interaction can result in the sharp increase in pressure in bearings,and the oil pressure increases with increasing graded index.The entrainment of oil in the inlet and outlet zones becomes more evident if a large graded index is selected.展开更多
基金National Natural Science Foundation of China under Grant Nos.51978213 and 51778190the National Key Research and Development Program of China under Grant Nos.2017YFC0703605 and 2016YFC0701106。
文摘For real-time dynamic substructure testing(RTDST),the influence of the inertia force of fluid specimens on the stability and accuracy of the integration algorithms has never been investigated.Therefore,this study proposes to investigate the stability and accuracy of the central difference method(CDM)for RTDST considering the specimen mass participation coefficient.First,the theory of the CDM for RTDST is presented.Next,the stability and accuracy of the CDM for RTDST considering the specimen mass participation coefficient are investigated.Finally,numerical simulations and experimental tests are conducted for verifying the effectiveness of the method.The study indicates that the stability of the algorithm is affected by the mass participation coefficient of the specimen,and the stability limit first increases and then decreases as the mass participation coefficient increases.In most cases,the mass participation coefficient will increase the stability limit of the algorithm,but in specific circumstances,the algorithm may lose its stability.The stability and accuracy of the CDM considering the mass participation coefficient are verified by numerical simulations and experimental tests on a three-story frame structure with a tuned liquid damper.
基金supported by the National Natural Science Foundation of China(Grant No.52174064)
文摘Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the transient flow,it is necessary to establish a transient hydraulic-thermal simulation model in order to determine the venting time.In this paper,based on two kinds of venting scenarios in which there is only one venting point in the venting system of a gas trunk pipeline segment—namely,where the venting point is either at one of the two ends or at the junction of two gas trunk pipeline segments—transient hydraulic-thermal simulation models are established.The models consist of gas flow governing equations,the gas state equation,gas physical property equations,initial conditions,and appropriate boundary conditions.The implicit central difference method is used to discretize the gas flow partial differential equations,and the trust-region-dogleg algorithm is used to solve the equations corresponding to each time step,in order to dynamically simulate the whole venting process.The judgment condition for the end of the venting process is that the average pressure of gas trunk pipeline segment is less than 0.11 MPa(actual pressure).Comparing the simulation results of the proposed model with those of the OLGA software and real operational data,we find that the venting time error is less than 10%.On this basis,a venting valve opening control principle is proposed,which prevents the venting noise from exceeded the specified noise value(85 d B)in the venting design of domestic gas pipeline projects.The established calculation model for venting time(dynamic simulation model)for a gas trunk pipeline segment and the proposed opening control principle of venting valve provide reference for the optimal operation of gas pipeline venting systems.
文摘In the practical problems such as nuclear waste pollution and seawater intrusion etc., many problems are reduced to solving the convection-diffusion equation, so the research of convection-diffusion equation is of great value. In this work, a spectral method is presented for solving one and two dimensional convection-diffusion equation with source term. The finite difference method is also used to solve the convection diffusion equation. The numerical experiments show that the spectral method is more efficient than other methods for solving the convection-diffusion equation.
基金This work is supported by the National Natural Science Foundations of China(No.11790282)National Natural Science Foundations of Hebei,China(A2019210037).
文摘The dynamic contact behavior of worn bearings with elastoplastic functionally graded coating is studied,and the interacting effect between worn band and functionally graded surface is analyzed.The surface deformation and roughness are included in the film thickness.The mixed elastohydrodynamic lubrication combined with point contact model is introduced to analyze the oil pressure in the contact zone.By using the Fourier transform method and Papkovich-Neuber potential function,the displacements and stress fields in the elastoplastic functionally graded coating are obtained.The second-order central difference method is used to solve the Reynolds equation.It is found that the repeated surface interaction can result in the sharp increase in pressure in bearings,and the oil pressure increases with increasing graded index.The entrainment of oil in the inlet and outlet zones becomes more evident if a large graded index is selected.
