The iron content is one of the most critical parameters affecting the microstructure and mechanical properties of recycled aluminum alloy.This study aimed to compare the microstructure and tensile properties of alloys...The iron content is one of the most critical parameters affecting the microstructure and mechanical properties of recycled aluminum alloy.This study aimed to compare the microstructure and tensile properties of alloys with varying iron content to ascertain the optimal iron content for formulating a recycled Al-Si-Mg aluminum alloy.Additionally,the effects of aging temperature and aging time on the microstructure and mechanical properties of recycled aluminum alloy were investigated.With increasing aging temperature and time,both tensile strength and yield strength are improved,while elongation is decreased.Specifically,when subject to a heat treatment consisting of a solution treatment at 535℃for 5 h followed by an aging treatment at 170℃for5.5 h,the newly designed recycled aluminum alloy achieves a tensile strength of 291 MPa and a yield strength of 238 MPa.These findings hold significant implications for the further development and broader application of recycled aluminum alloys.展开更多
A pyrimidine derivative,6-phenyl-2-thiouracil(PT),was synthesized for developing a corrosion inhibitor(CI)applied in the protection of the nickel−aluminum bronze(NAB)in seawater.The anti-corrosion effect of PT was eva...A pyrimidine derivative,6-phenyl-2-thiouracil(PT),was synthesized for developing a corrosion inhibitor(CI)applied in the protection of the nickel−aluminum bronze(NAB)in seawater.The anti-corrosion effect of PT was evaluated by the mass loss experiment,electrochemical tests and surface analysis.The results show that PT exhibits excellent inhibition performance and the maximum inhibition efficiency of PT reaches 99.6%.The interaction mechanism was investigated through X-ray photoelectron spectroscopy(XPS)and molecule dynamics simulation based on the density functional theory(DFT).The S-Cu,Al-N and Cu-N bonds are formed by the chemical interactions,leading to the adsorption of PT on the NAB surface.The diffusion of corrosive species is hindered considerably by the protective PT film with composition of(PT-Cu)_(ads)and(PT-Al)_(ads)on the PT/NAB interface.The degree of suppression is increased with the addition of more PT molecules.展开更多
The squeezing deformation of surrounding rock is an important factor restricting the safe construction and long-term operation of tunnels when a tunnel passes through soft strata with high ground stress.Under such sof...The squeezing deformation of surrounding rock is an important factor restricting the safe construction and long-term operation of tunnels when a tunnel passes through soft strata with high ground stress.Under such soft rock geological conditions,the large deformation of the surrounding rock can easily lead to the failure of supporting structures,including shotcrete cracks,spalling,and steel arch distortion.To improve the lining support performance during the large deformation of squeezed surrounding rock,this work selects aluminum foam with densities of 0.25 g/cm3,0.42 g/cm3 and 0.61 g/cm3 as the buffer layer material and carries out uniaxial confined compression tests.Through the evaluation and analysis of energy absorption and the comparison of the yield pressure of aluminum foam with those of other cushioning materials and yield pressure support systems,the strength,deformation and energy absorption of aluminum foam with a density of 0.25 g/cm3 meet the yield pressure performance requirements.The numerical model of the buffer layer yielding support system is then established via the finite element analysis software ABAQUS,and the influence of the buffer layer setting on the lining support is analyzed.Compared with the conventional support scheme,the addition of an aluminum foam buffer layer can reduce the stress and deformation of the primary support and secondary lining.The maximum and minimum principal stresses of the primary support are reduced by 13%and 15%,respectively.The maximum and minimum principal stresses of the secondary lining are reduced by 15%and 12%,respectively,and the displacement deformation of the secondary lining position is reduced by 15%.In summary,the application of aluminum foam buffer layer can reduce the stress and deformation of the primary support and secondary lining,improve the stress safety of the support and reduce the deformation of the support.展开更多
A Ni–P alloy gradient coating consisting of multiple electroless Ni–P layers with various phosphorus contents was prepared on the aviation aluminum alloy. Several characterization and electrochemical techniques were...A Ni–P alloy gradient coating consisting of multiple electroless Ni–P layers with various phosphorus contents was prepared on the aviation aluminum alloy. Several characterization and electrochemical techniques were used to characterize the different Ni–P coatings’ morphologies, phase structures, elemental compositions, and corrosion protection. The gradient coating showed good adhesion and high corrosion and wear resistance, enabling the application of aluminum alloy in harsh environments. The results showed that the double zinc immersion was vital in obtaining excellent adhesion (81.2 N). The optimal coating was not peeled and shredded even after bending tests with angles higher than 90°and was not corroded visually after 500 h of neutral salt spray test at 35℃. The high corrosion resistance was attributed to the misaligning of these micro defects in the three different nickel alloy layers and the amorphous structure of the high P content in the outer layer. These findings guide the exploration of functional gradient coatings that meet the high application requirement of aluminum alloy parts in complicated and harsh aviation environments.展开更多
Lightweight aluminum(Al)alloys have been widely used in frontier fields like aerospace and automotive industries,which attracts great interest in additive manufacturing(AM)to process high-value Al parts.As a mainstrea...Lightweight aluminum(Al)alloys have been widely used in frontier fields like aerospace and automotive industries,which attracts great interest in additive manufacturing(AM)to process high-value Al parts.As a mainstream AM technique,laser-directed energy deposition(LDED)shows good scalability to meet the requirements for large-format component manufacturing and repair.However,LDED Al alloys are highly challenging due to their inherent poor printability(e.g.low laser absorption,high oxidation sensitivity and cracking tendency).To further promote the development of LDED high-performance Al alloys,this review offers a deep understanding of the challenges and strategies to improve printability in LDED Al alloys.The porosity,cracking,distortion,inclusions,element evaporation and resultant inferior mechanical properties(worse than laser powder bed fusion)are the key challenges in LDED Al alloys.Processing parameter optimizations,in-situ alloy design,reinforcing particle addition and field assistance are the efficient approaches to improving the printability and performance of LDED Al alloys.The underlying correlations between processes,alloy innovation,characteristic microstructures,and achievable performances in LDED Al alloys are discussed.The benchmark mechanical properties and primary strengthening mechanism of LDED Al alloys are summarized.This review aims to provide a critical and in-depth evaluation of current progress in LDED Al alloys.Future opportunities and perspectives in LDED high-performance Al alloys are also outlined.展开更多
In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduce...In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.展开更多
The capability for synergistic advancements in both making and shaping afforded by additive manufacturing(AM) enables the flexible production of high-performance components. Boosted by the growing demand for heat-resi...The capability for synergistic advancements in both making and shaping afforded by additive manufacturing(AM) enables the flexible production of high-performance components. Boosted by the growing demand for heat-resistant aluminum alloys in the moderate-temperature weight-critical applications, AM of heat-resistant aluminum alloys constitutes a burgeoning field. Although numerous advances have emerged in recent years, there remains a gap in the review literature elucidating the newly-developed alloy systems and critically evaluating the efficacy. This state-of-the-art review presents a detailed overview of recent achievements on the heat-resistant aluminum alloy development. It begins with the introduction of various AM technologies and the pros and cons of each technique are evaluated. The enhancement mechanisms associated with printability and high-temperature properties of AM aluminum alloys are then delineated. Thereafter, the various additively manufactured aluminum alloy systems are discussed with regard to the microstructure, heat resistance and high-temperature performance. An emphasis is put on the powder bed fusion-laser beam(PBF-LB) as it has garnered significant attention for heat-resistant aluminum alloys and the vast majority of the current studies are based on this technique. Finally, perspectives are outlined to provide guidance for future research.展开更多
An innovative process was proposed to recover metallic aluminum from secondary aluminum dross(SAD)by alkali roasting−water leaching.Thermodynamic calculations and experimental results were used to illustrate the phase...An innovative process was proposed to recover metallic aluminum from secondary aluminum dross(SAD)by alkali roasting−water leaching.Thermodynamic calculations and experimental results were used to illustrate the phase transformation and reaction mechanism of the alkali roasting process.The leaching behaviors of roasted residue were also analyzed.Under optimal conditions,the aluminum extraction rate reached 93.08%.In addition,the kinetics of the water leaching of roasted products was studied through shrinking core model,and it was revealed that the leaching process of aluminum was in accord with diffusion control.The apparent activation energy of the leaching process was calculated to be 3.44 kJ/mol.Based on the above study,the underlying mechanism of the alkali roasting−water leaching was clarified.展开更多
The electrochemical behavior of Al(Ⅲ)in urea-1-butyl-3-methylimidazolium chloride-aluminum chloride(urea-BMIC-AlCl_(3))ionic liquids,and the effect of potential and temperature on the characterization of cathode prod...The electrochemical behavior of Al(Ⅲ)in urea-1-butyl-3-methylimidazolium chloride-aluminum chloride(urea-BMIC-AlCl_(3))ionic liquids,and the effect of potential and temperature on the characterization of cathode products,current efficiency and energy consumption of aluminum electrorefining have been investigated.Cyclic voltammetry showed that the electrochemical reduction of Al(Ⅲ)was a one-step three-electron-transfer irreversible reaction,and the electrochemical reaction was controlled by diffusion.The diffusion coefficient of Al(Ⅲ)in urea-BMIC-AlCl_(3)ionic liquids at 313 K was 1.94×10^(−7)cm^(2)/s.The 7075 aluminum alloy was used as an anode for electrorefining,and the cathode products were analyzed by XRD,SEM and EDS.The results from XRD analysis indicated that the main phase of the cathode products was aluminum.The results from SEM and EDS characterization revealed that the cathode product obtained by electrorefining−1.2 V(vs.Al)was dense and uniform,and the mass fraction of aluminum decreased from 99.61%to 99.10%as the experimental temperature increased from 313 K to 333 K.In this work,the optimum experimental conditions were−1.2 V(vs.Al)and 313 K.At this time,the cathode current efficiency was 97.80%,while the energy consumption was 3.72 kW·h/kg.展开更多
Ultra-large aluminum shape castings have been increasingly used in automotive vehicles,particularly in electric vehicles for light-weighting and vehicle manufacturing cost reduction.As most of them are structural comp...Ultra-large aluminum shape castings have been increasingly used in automotive vehicles,particularly in electric vehicles for light-weighting and vehicle manufacturing cost reduction.As most of them are structural components subject to both quasi-static,dynamic and cyclic loading,the quality and quantifiable performance of the ultra-large aluminum shape castings is critical to their success in both design and manufacturing.This paper briefly reviews some application examples of ultra-large aluminum castings in automotive industry and outlines their advantages and benefits.Factors affecting quality,microstructure and mechanical properties of ultra-large aluminum castings are evaluated and discussed as aluminum shape casting processing is very complex and often involves many competing mechanisms,multi-physics phenomena,and potentially large uncertainties that significantly influence the casting quality and performance.Metallurgical analysis and mechanical property assessment of an ultra-large aluminum shape casting are presented.Challenges are highlighted and suggestions are made for robust design and manufacturing of ultra-large aluminum castings.展开更多
Owing to their high volumetric capacity,low cost and high safety,rechargeable aluminum batteries have become promising candidates for energy applications.However,the high charge density of Al^(3+)leads to strong coulo...Owing to their high volumetric capacity,low cost and high safety,rechargeable aluminum batteries have become promising candidates for energy applications.However,the high charge density of Al^(3+)leads to strong coulombic interactions between anions and the cathode,resulting in sluggish diffusion kinetics and irreversible collapse of the cathode structure.Furthermore,AlCl_(3)-based ionic liquids,which are commonly used as electrolytes in such batteries,corrode battery components and are prone to side reactions.The above problems lead to low capacity and poor cycling stability.Herein,we propose a reduced graphene oxide(rGO)cathode with a three-dimensional porous structure prepared using a simple and scalable method.The lamellar edges and oxygen-containing group defects of rGO synergistically provide abundant ion storage sites and enhance ion transfer kinetics.We matched the prepared rGO cathode with noncorrosive electrolyte 0.5 mol·L^(-1) Al(OTF)_(3)/[BMIM]OTF and Al metal to construct a high-performance battery,Al||rGO-150,with good cycling stability for 2700 cycles.Quasi-in-situ physicochemical characterization results show that the ion storage mechanism is codominated by diffusion and capacitance.The capacity consists of the insertion of Al-based species cations as well as synergistic adsorption of Al(OTF)_(x)^((3-x)+)(x<3)and[BMIM]+.The present study promotes the fundamental and applied research on rechargeable aluminum batteries.展开更多
Two-mm thick A1050 pure aluminum plates were successfully joined by conventional and rapid cooling friction stir welding(FSW), respectively. The microstructure and mechanical properties of the welded joints were inves...Two-mm thick A1050 pure aluminum plates were successfully joined by conventional and rapid cooling friction stir welding(FSW), respectively. The microstructure and mechanical properties of the welded joints were investigated by electron backscatter diffraction characterization, Vickers hardness measurements, and tensile testing. The results showed that liquid CO_(2) coolant significantly reduced the peak temperature and increased the cooling rate, so the rapidly cooled FSW joint exhibited fine grains with a large number of dislocations. The grain refinement mechanism of the FSW A1050 pure aluminum joint was primarily attributed to the combined effects of continuous dynamic recrystallization, grain subdivision, and geometric dynamic recrystallization. Compared with conventional FSW, the yield strength, ultimate tensile strength, and fracture elongation of rapidly cooled FSW joint were significantly enhanced, and the welding efficiency was increased from 80% to 93%. The enhanced mechanical properties and improved synergy of strength and ductility were obtained due to the increased dislocation density and remarkable grain refinement. The wear of the tool can produce several WC particles retained in the joint, and the contribution of second phase strengthening to the enhanced strength should not be ignored.展开更多
Aluminum hypophosphite microspheres(AHP) were synthesized by hydrothermal method using NaH2PO2·H2O and AlCl3·6H2O as raw materials, and then the AHP microspheres were polymerized by surface polymerization of...Aluminum hypophosphite microspheres(AHP) were synthesized by hydrothermal method using NaH2PO2·H2O and AlCl3·6H2O as raw materials, and then the AHP microspheres were polymerized by surface polymerization of micro-nanospheres with cyclic cross-linked poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol)(PZS). A new organic-inorganic poly(phosphonitrile)-modified aluminum hypophosphite microspheres(PZS-AHP) were synthesized by encapsulation and applied to flame retardant thermoplastic polyurethane(TPU). The microstructure and chemical composition of the PZS-AHP microsphere were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray spectroscopy. The thermal stability of PZS-AHP microsphere was explored with thermogravimetric analysis. Thermogravimetric data indicate that the PZS-AHP microspheres have excellent thermal stability. The thermal and flame-retarding properties of the TPU composites were evaluated by thermogravimetric(TG), limited oxygen index tests(LOI), and cone calorimeter test(CCT). The TPU composite achieved vertical burning(UL-94) V-0 grade and LOI value reached 29.2% when 10 wt% PZS-AHP was incorporated. Compared with those of pure TPU, the peak heat release rate(pHRR) and total heat release(THR) of TPU/10%PZS-AHP decreased by 82.2% and 42.5%, respectively. The results of CCT indicated that PZS-AHP microsphere could improve the flame retardancy of TPU composites.展开更多
The structural transformation from a liquid into a crystalline solid is an important subject in condensed matter physics and materials science. In the present study, first-principles molecular dynamics calculations ar...The structural transformation from a liquid into a crystalline solid is an important subject in condensed matter physics and materials science. In the present study, first-principles molecular dynamics calculations are performed to investigate the structure and properties of aluminum during the solidification which is induced by cooling and compression. In the cooling process and compression process, it is found that the icosahedral short-range order is initially enhanced and then begin to decay, the face-centered cubic short-range order eventually becomes dominant before it transforms into a crystalline solid.展开更多
The impact of cooling rate after solution heat treatment on exfoliation corrosion resistance of a Li-containing 7xxx aluminum alloy was investigated by accelerated immersion and electrochemical impedance spectroscopy ...The impact of cooling rate after solution heat treatment on exfoliation corrosion resistance of a Li-containing 7xxx aluminum alloy was investigated by accelerated immersion and electrochemical impedance spectroscopy test,optical microscope,electron backscatter diffraction and scanning transmission electron microscope.With the decrease of cooling rate from 1700℃/s to 4℃/s,exfoliation corrosion resistance of the aged specimens decreases with rating changing from EA to EC and the maximum corrosion depth increasing from about 169.4μm to 632.1μm.Exfoliation corrosion tends to develop along grain boundaries in the specimens with cooling rates higher than about 31℃/s and along both grain boundaries and sub-grain boundaries in the specimens with lower cooling rates.The reason has been discussed based on the changes of the microstructure and microchemistry at grain boundaries and sub-grain boundaries due to slow cooling.展开更多
Aluminum(Al)toxicity poses a significant constraint on field crop yields in acid soils.Zinc finger protein36(ZFP36)is well-documented for its pivotal role in enhancing tolerance to both drought and oxidative stress in...Aluminum(Al)toxicity poses a significant constraint on field crop yields in acid soils.Zinc finger protein36(ZFP36)is well-documented for its pivotal role in enhancing tolerance to both drought and oxidative stress in rice.This study unveils a novel function of ZFP36 modulated by abscisic acid(ABA)-dependent mechanisms,specifically aimed at alleviating Al toxicity in rice.Under Al stress,the expression of ZFP36significantly increased through an ABA-dependent pathway.Knocking down ZFP36 heightened Al sensitivity,while overexpressing ZFP36 conferred increased resistance to Al stress.Additionally,our investigations revealed a physical interaction between ZFP36 and pyruvate dehydrogenase kinase 1 in rice(OsPDK1).Biochemical assays further elucidated that OsPDK1 phosphorylates ZFP36 at the amino acid site 73–161.Subsequent experiments demonstrated that ZFP36 positively regulates the expression of ascorbate peroxidases(OsAPX1)and OsALS1 by binding to specific elements in their upstream segments in rice.Through genetic and phenotypic analyses,we unveiled that OsPDK1 influences ABA-triggered antioxidant defense to alleviate Al toxicity by interacting with ZFP36.In summary,our study underscores that pyruvate dehydrogenase kinase 1(OsPDK1)phosphorylates ZFP36 to modulate the activities of antioxidant enzymes via an ABA-dependent pathway,influencing tolerance of rice to soil Al toxicity.展开更多
Coating modification is an important way to enhance the reactivity of aluminum powder.In this paper,ammonium perchlorate and aluminum powder were assembled into energetic microunits by liquid deposition method.Spheric...Coating modification is an important way to enhance the reactivity of aluminum powder.In this paper,ammonium perchlorate and aluminum powder were assembled into energetic microunits by liquid deposition method.Spherical particles with AP as shell and ultrafine aluminum powder as the core(Al@AP)were gained.The micromorphology results show that the coated particles are about 5μm,and the coating layer is evenly distributed on the outer surface of aluminum powder,indicating a complete coating.The energetic microunits were implanted into the nitrate ester plasticizing adhesive system(NEPE)as solid phase fillers.The effect of filler on the rheological properties,safety,mechanical properties,thermal reaction and energy properties of the system was analyzed by comparing with the raw aluminum filler.The test results show that the rheological properties,mechanical properties and pressure index of NEPE containing system Al@AP meets the requirements of solid propellant charging.Compared with Al based propellant,the mechanical sensitivity and thermal sensitivity are decreased,the safety is better,and the explosion heat of the propellant is increased by 7.8%.The engine test shows that the specific impulse is increased by 1.2 s.Al@AP can improve the energy output and safety of NEPE propellant,and has potential application prospects in high-energy propellants.展开更多
The evolution of microstructure during hot deformation is key to achieving good mechanical properties in aluminum alloys.We have developed a cellular automaton(CA) based model to simulate the microstructural evolution...The evolution of microstructure during hot deformation is key to achieving good mechanical properties in aluminum alloys.We have developed a cellular automaton(CA) based model to simulate the microstructural evolution in 7075 aluminum alloy during hot deformation.Isothermal compression tests were conducted to obtain material parameters for 7075 aluminum alloy,leading to the establishment of models for dislocation density,nucleation of recrystallized grains,and grain growth.Integrating these aspects with grain topological deformation,our CA model effectively predicts flow stress,dynamic recrystallization(DRX) volume fraction,and average grain size under diverse deformation conditions.A systematic comparison was made between electron back scattered diffraction(EBSD) maps and CA model simulated under different deformation temperatures(573 to 723 K),strain rates(0.001 to 1 s^(-1)),and strain amounts(30% to 70%).These analyses indicate that large strain,high temperature,and low strain rate facilitate dynamic recrystallization and grain refinement.The results from the CA model show good accuracy and predictive capability,with experimental error within 10%.展开更多
Aluminum(Al),the most abundant metallic element on the earth crust,has been reckoned as a promising battery material for its the highest theoretical volume capacity(8046 mAh cm^(-3)).Being rechargeable in ionic liquid...Aluminum(Al),the most abundant metallic element on the earth crust,has been reckoned as a promising battery material for its the highest theoretical volume capacity(8046 mAh cm^(-3)).Being rechargeable in ionic liquid electrolytes,however,the Al anode and battery case suffer from corrosion.On the other hand,Al is irreversible in aqueous electrolyte with severe hydrogen evolution reaction.Here,we demonstrate a water-in-salt aluminum ion electrolyte(WISE)based on Al and lithium salts to tackle the above challenges.In the WISE system,water molecules can be confined within the Li^(+)solvation structures.This diminished Al^(3+)-H_(2)O interaction essentially eliminates the hydrolysis effect,effectively protecting Al anode from corrosion.Therefore,long-term Al plating/stripping can be realized.Furthermore,two types of high-performance full batteries have been demonstrated using copper hexacyanoferrate(CuHCF,a Prussian Blue Analogues)and LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM)as cathodes.The reversibility of Al anode laid the foundation for low cost rechargeable batteries suffering for large-scale energy storage.Broader context:Al batteries are expected to become a safe and sustainable alternative to lithium batteries.For decades,chase for a feasible Al secondary battery has not been successful.The key challenge is to find suitable cathode and electrolyte materials,together with which Al anode battery can function reversibly.Currently,fatal drawbacks have impeded the practical application of Al metal batteries(AMBs),such as sustained corrosion of Al anode and battery case in ionic liquid electrolytes,irreversibility issues as well as severe hydrogen evolution reaction during cycling in aqueous electrolyte.Therefore,electrolyte and their electrochemical kinetics play a vital role in the performance and environmental operating limitations of high-energy Al metal batteries.In this work,we demonstrate a nearly neutral Al ion water-in-salt electrolyte(WISE)to tackle the above challenges.The WISE shows excellent stability in the open atmosphere.The distinct solvation-sheath structure of Al^(3+)in the WISE system would protect Al metal anodes from corrosion and eliminate hydrogen evolution reaction effectively,further promoting the reversibility of Al metal anodes with dendrite-free morphology.Moreover,such a WISE exhibits superior compatibility with LiNi_(0.3)Co_(0.3)Mn_(0.3)O_(2)(NCM)and copper hexacyanoferrate(CuHCF)cathodes and long-term stabilities with high coulombic efficiency(CE)can be attained for full batteries with the WISE.The approach in this study can furnish an opportunity to develop reversible AMBs and lay the foundation for other potential multivalent-metalbased secondary batteries suffering from interface passivation and poor reversibility,which suggest the promise of multivalent metal batteries and their applications in large-scale energy storage.展开更多
The effect of ultraviolet(UV)radiation and biocide benzalkonium chloride(BKC)on fungal-induced corrosion of AA7075 induced by Aspergillus terreus(A.terreus)was deeply studied using analysis of biological activity,surf...The effect of ultraviolet(UV)radiation and biocide benzalkonium chloride(BKC)on fungal-induced corrosion of AA7075 induced by Aspergillus terreus(A.terreus)was deeply studied using analysis of biological activity,surface analysis,and electrochemical measurements.Results demonstrated that the planktonic and sessile spore concentrations decline by more than two orders of magnitude when UV radiation and BKC are combinedly used compared with the control.UV radiation can inhibit the biological activity of A.terreus and influence the stability of passive film of AA7075.Except for direct disinfection,the physical adsorption of BKC on the specimen can effectively inhibit the attachment of A.terreus.The combination of UV radiation and BKC can much more effectively inhibit the corrosion of AA,especially pitting corrosion,due to their synergistic effect.The combined application of UV radiation and BKC can be a good method to effectively inhibit fungal-induced corrosion.展开更多
基金support from funded project:Key Industrial R&D Projects of Chongqing Technology Innovation and Application Demonstration (cstc2020jscx-dxwtBX0023)。
文摘The iron content is one of the most critical parameters affecting the microstructure and mechanical properties of recycled aluminum alloy.This study aimed to compare the microstructure and tensile properties of alloys with varying iron content to ascertain the optimal iron content for formulating a recycled Al-Si-Mg aluminum alloy.Additionally,the effects of aging temperature and aging time on the microstructure and mechanical properties of recycled aluminum alloy were investigated.With increasing aging temperature and time,both tensile strength and yield strength are improved,while elongation is decreased.Specifically,when subject to a heat treatment consisting of a solution treatment at 535℃for 5 h followed by an aging treatment at 170℃for5.5 h,the newly designed recycled aluminum alloy achieves a tensile strength of 291 MPa and a yield strength of 238 MPa.These findings hold significant implications for the further development and broader application of recycled aluminum alloys.
基金supported by the National Natural Science Foundation of China(No.52171069).
文摘A pyrimidine derivative,6-phenyl-2-thiouracil(PT),was synthesized for developing a corrosion inhibitor(CI)applied in the protection of the nickel−aluminum bronze(NAB)in seawater.The anti-corrosion effect of PT was evaluated by the mass loss experiment,electrochemical tests and surface analysis.The results show that PT exhibits excellent inhibition performance and the maximum inhibition efficiency of PT reaches 99.6%.The interaction mechanism was investigated through X-ray photoelectron spectroscopy(XPS)and molecule dynamics simulation based on the density functional theory(DFT).The S-Cu,Al-N and Cu-N bonds are formed by the chemical interactions,leading to the adsorption of PT on the NAB surface.The diffusion of corrosive species is hindered considerably by the protective PT film with composition of(PT-Cu)_(ads)and(PT-Al)_(ads)on the PT/NAB interface.The degree of suppression is increased with the addition of more PT molecules.
基金the support of the National Natural Science Foundation of China(Grant No.42207199)Scientific Research Project of Education of Zhejiang Province(No.Y202351343)+1 种基金Zhejiang Postdoctoral Scientific Research Project(Grant Nos.ZJ2022155,ZJ2022156)Zhejiang Province International Science and Technology Cooperation Base Open Fund Project(IBGDP-2023-01)。
文摘The squeezing deformation of surrounding rock is an important factor restricting the safe construction and long-term operation of tunnels when a tunnel passes through soft strata with high ground stress.Under such soft rock geological conditions,the large deformation of the surrounding rock can easily lead to the failure of supporting structures,including shotcrete cracks,spalling,and steel arch distortion.To improve the lining support performance during the large deformation of squeezed surrounding rock,this work selects aluminum foam with densities of 0.25 g/cm3,0.42 g/cm3 and 0.61 g/cm3 as the buffer layer material and carries out uniaxial confined compression tests.Through the evaluation and analysis of energy absorption and the comparison of the yield pressure of aluminum foam with those of other cushioning materials and yield pressure support systems,the strength,deformation and energy absorption of aluminum foam with a density of 0.25 g/cm3 meet the yield pressure performance requirements.The numerical model of the buffer layer yielding support system is then established via the finite element analysis software ABAQUS,and the influence of the buffer layer setting on the lining support is analyzed.Compared with the conventional support scheme,the addition of an aluminum foam buffer layer can reduce the stress and deformation of the primary support and secondary lining.The maximum and minimum principal stresses of the primary support are reduced by 13%and 15%,respectively.The maximum and minimum principal stresses of the secondary lining are reduced by 15%and 12%,respectively,and the displacement deformation of the secondary lining position is reduced by 15%.In summary,the application of aluminum foam buffer layer can reduce the stress and deformation of the primary support and secondary lining,improve the stress safety of the support and reduce the deformation of the support.
基金financially supported by the National Natural Science Foundation of China (No.52271073)。
文摘A Ni–P alloy gradient coating consisting of multiple electroless Ni–P layers with various phosphorus contents was prepared on the aviation aluminum alloy. Several characterization and electrochemical techniques were used to characterize the different Ni–P coatings’ morphologies, phase structures, elemental compositions, and corrosion protection. The gradient coating showed good adhesion and high corrosion and wear resistance, enabling the application of aluminum alloy in harsh environments. The results showed that the double zinc immersion was vital in obtaining excellent adhesion (81.2 N). The optimal coating was not peeled and shredded even after bending tests with angles higher than 90°and was not corroded visually after 500 h of neutral salt spray test at 35℃. The high corrosion resistance was attributed to the misaligning of these micro defects in the three different nickel alloy layers and the amorphous structure of the high P content in the outer layer. These findings guide the exploration of functional gradient coatings that meet the high application requirement of aluminum alloy parts in complicated and harsh aviation environments.
基金supported by the 2022 MTC Young Individual Research Grants(Grant No.M22K3c0097)the Singapore Research,Innovation and Enterprise(RIE)2025 PlanSingapore Aerospace Programme Cycle 16(Grant No.M2215a0073)。
文摘Lightweight aluminum(Al)alloys have been widely used in frontier fields like aerospace and automotive industries,which attracts great interest in additive manufacturing(AM)to process high-value Al parts.As a mainstream AM technique,laser-directed energy deposition(LDED)shows good scalability to meet the requirements for large-format component manufacturing and repair.However,LDED Al alloys are highly challenging due to their inherent poor printability(e.g.low laser absorption,high oxidation sensitivity and cracking tendency).To further promote the development of LDED high-performance Al alloys,this review offers a deep understanding of the challenges and strategies to improve printability in LDED Al alloys.The porosity,cracking,distortion,inclusions,element evaporation and resultant inferior mechanical properties(worse than laser powder bed fusion)are the key challenges in LDED Al alloys.Processing parameter optimizations,in-situ alloy design,reinforcing particle addition and field assistance are the efficient approaches to improving the printability and performance of LDED Al alloys.The underlying correlations between processes,alloy innovation,characteristic microstructures,and achievable performances in LDED Al alloys are discussed.The benchmark mechanical properties and primary strengthening mechanism of LDED Al alloys are summarized.This review aims to provide a critical and in-depth evaluation of current progress in LDED Al alloys.Future opportunities and perspectives in LDED high-performance Al alloys are also outlined.
基金supported by Guangdong Science and Technology Plan Project(Grant No.20170902,No.20180902)Yangjiang Science and Technology Plan Project(Grant No.SDZX2020063)+1 种基金Shenzhen Key Projects of Innovation and Entrepreneurship Plan Technology(JSGG20210420091802007)Yunfu 2023 Science and Technology Plan Project(S2023020201).
文摘In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.
基金sponsored by the National Natural Science Foundation of China (No. 52305415)National Natural Science Foundation of Hubei Province (No. 2024AFB666)。
文摘The capability for synergistic advancements in both making and shaping afforded by additive manufacturing(AM) enables the flexible production of high-performance components. Boosted by the growing demand for heat-resistant aluminum alloys in the moderate-temperature weight-critical applications, AM of heat-resistant aluminum alloys constitutes a burgeoning field. Although numerous advances have emerged in recent years, there remains a gap in the review literature elucidating the newly-developed alloy systems and critically evaluating the efficacy. This state-of-the-art review presents a detailed overview of recent achievements on the heat-resistant aluminum alloy development. It begins with the introduction of various AM technologies and the pros and cons of each technique are evaluated. The enhancement mechanisms associated with printability and high-temperature properties of AM aluminum alloys are then delineated. Thereafter, the various additively manufactured aluminum alloy systems are discussed with regard to the microstructure, heat resistance and high-temperature performance. An emphasis is put on the powder bed fusion-laser beam(PBF-LB) as it has garnered significant attention for heat-resistant aluminum alloys and the vast majority of the current studies are based on this technique. Finally, perspectives are outlined to provide guidance for future research.
基金the financial support from the National Natural Science Foundation of China(Nos.51804342,51874356)the National Key R&D Program of China(Nos.2019YFC1907301,2020YFC1909203)the Innovation Driven Project of Central South University,China(No.2020CX038).
文摘An innovative process was proposed to recover metallic aluminum from secondary aluminum dross(SAD)by alkali roasting−water leaching.Thermodynamic calculations and experimental results were used to illustrate the phase transformation and reaction mechanism of the alkali roasting process.The leaching behaviors of roasted residue were also analyzed.Under optimal conditions,the aluminum extraction rate reached 93.08%.In addition,the kinetics of the water leaching of roasted products was studied through shrinking core model,and it was revealed that the leaching process of aluminum was in accord with diffusion control.The apparent activation energy of the leaching process was calculated to be 3.44 kJ/mol.Based on the above study,the underlying mechanism of the alkali roasting−water leaching was clarified.
基金Project(52004062)supported by the National Natural Science Foundation of ChinaProject(2020-MS-084)supported by the Natural Science Foundation of Liaoning Province,ChinaProject(N2125014)supported by the Fundamental Research Funds for the Central Universities,China。
文摘The electrochemical behavior of Al(Ⅲ)in urea-1-butyl-3-methylimidazolium chloride-aluminum chloride(urea-BMIC-AlCl_(3))ionic liquids,and the effect of potential and temperature on the characterization of cathode products,current efficiency and energy consumption of aluminum electrorefining have been investigated.Cyclic voltammetry showed that the electrochemical reduction of Al(Ⅲ)was a one-step three-electron-transfer irreversible reaction,and the electrochemical reaction was controlled by diffusion.The diffusion coefficient of Al(Ⅲ)in urea-BMIC-AlCl_(3)ionic liquids at 313 K was 1.94×10^(−7)cm^(2)/s.The 7075 aluminum alloy was used as an anode for electrorefining,and the cathode products were analyzed by XRD,SEM and EDS.The results from XRD analysis indicated that the main phase of the cathode products was aluminum.The results from SEM and EDS characterization revealed that the cathode product obtained by electrorefining−1.2 V(vs.Al)was dense and uniform,and the mass fraction of aluminum decreased from 99.61%to 99.10%as the experimental temperature increased from 313 K to 333 K.In this work,the optimum experimental conditions were−1.2 V(vs.Al)and 313 K.At this time,the cathode current efficiency was 97.80%,while the energy consumption was 3.72 kW·h/kg.
文摘Ultra-large aluminum shape castings have been increasingly used in automotive vehicles,particularly in electric vehicles for light-weighting and vehicle manufacturing cost reduction.As most of them are structural components subject to both quasi-static,dynamic and cyclic loading,the quality and quantifiable performance of the ultra-large aluminum shape castings is critical to their success in both design and manufacturing.This paper briefly reviews some application examples of ultra-large aluminum castings in automotive industry and outlines their advantages and benefits.Factors affecting quality,microstructure and mechanical properties of ultra-large aluminum castings are evaluated and discussed as aluminum shape casting processing is very complex and often involves many competing mechanisms,multi-physics phenomena,and potentially large uncertainties that significantly influence the casting quality and performance.Metallurgical analysis and mechanical property assessment of an ultra-large aluminum shape casting are presented.Challenges are highlighted and suggestions are made for robust design and manufacturing of ultra-large aluminum castings.
基金supported by the National Natural Science Foundation of China(Grant Nos.52222213,U23A20572)the Fundamental Research Funds for the Central Universities of China(Grant No.22lgqb01).
文摘Owing to their high volumetric capacity,low cost and high safety,rechargeable aluminum batteries have become promising candidates for energy applications.However,the high charge density of Al^(3+)leads to strong coulombic interactions between anions and the cathode,resulting in sluggish diffusion kinetics and irreversible collapse of the cathode structure.Furthermore,AlCl_(3)-based ionic liquids,which are commonly used as electrolytes in such batteries,corrode battery components and are prone to side reactions.The above problems lead to low capacity and poor cycling stability.Herein,we propose a reduced graphene oxide(rGO)cathode with a three-dimensional porous structure prepared using a simple and scalable method.The lamellar edges and oxygen-containing group defects of rGO synergistically provide abundant ion storage sites and enhance ion transfer kinetics.We matched the prepared rGO cathode with noncorrosive electrolyte 0.5 mol·L^(-1) Al(OTF)_(3)/[BMIM]OTF and Al metal to construct a high-performance battery,Al||rGO-150,with good cycling stability for 2700 cycles.Quasi-in-situ physicochemical characterization results show that the ion storage mechanism is codominated by diffusion and capacitance.The capacity consists of the insertion of Al-based species cations as well as synergistic adsorption of Al(OTF)_(x)^((3-x)+)(x<3)and[BMIM]+.The present study promotes the fundamental and applied research on rechargeable aluminum batteries.
基金Funded by the Natural Science Foundation of Jiangsu Province(No.BK20211067)“Qing Lan” Project of Jiangsu Province。
文摘Two-mm thick A1050 pure aluminum plates were successfully joined by conventional and rapid cooling friction stir welding(FSW), respectively. The microstructure and mechanical properties of the welded joints were investigated by electron backscatter diffraction characterization, Vickers hardness measurements, and tensile testing. The results showed that liquid CO_(2) coolant significantly reduced the peak temperature and increased the cooling rate, so the rapidly cooled FSW joint exhibited fine grains with a large number of dislocations. The grain refinement mechanism of the FSW A1050 pure aluminum joint was primarily attributed to the combined effects of continuous dynamic recrystallization, grain subdivision, and geometric dynamic recrystallization. Compared with conventional FSW, the yield strength, ultimate tensile strength, and fracture elongation of rapidly cooled FSW joint were significantly enhanced, and the welding efficiency was increased from 80% to 93%. The enhanced mechanical properties and improved synergy of strength and ductility were obtained due to the increased dislocation density and remarkable grain refinement. The wear of the tool can produce several WC particles retained in the joint, and the contribution of second phase strengthening to the enhanced strength should not be ignored.
基金Supported by the Opening Project of Hubei Three Gorges Laboratory (No.SK213008)the Innovation Fund of Key Laboratory of Green Chemical Process of Ministry of Education (No.GCXP202109)。
文摘Aluminum hypophosphite microspheres(AHP) were synthesized by hydrothermal method using NaH2PO2·H2O and AlCl3·6H2O as raw materials, and then the AHP microspheres were polymerized by surface polymerization of micro-nanospheres with cyclic cross-linked poly(cyclotriphosphazene-co-4,4'-sulfonyldiphenol)(PZS). A new organic-inorganic poly(phosphonitrile)-modified aluminum hypophosphite microspheres(PZS-AHP) were synthesized by encapsulation and applied to flame retardant thermoplastic polyurethane(TPU). The microstructure and chemical composition of the PZS-AHP microsphere were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy and X-ray spectroscopy. The thermal stability of PZS-AHP microsphere was explored with thermogravimetric analysis. Thermogravimetric data indicate that the PZS-AHP microspheres have excellent thermal stability. The thermal and flame-retarding properties of the TPU composites were evaluated by thermogravimetric(TG), limited oxygen index tests(LOI), and cone calorimeter test(CCT). The TPU composite achieved vertical burning(UL-94) V-0 grade and LOI value reached 29.2% when 10 wt% PZS-AHP was incorporated. Compared with those of pure TPU, the peak heat release rate(pHRR) and total heat release(THR) of TPU/10%PZS-AHP decreased by 82.2% and 42.5%, respectively. The results of CCT indicated that PZS-AHP microsphere could improve the flame retardancy of TPU composites.
基金Project supported by the National Natural Science Foundation of China(Grant No.51701180)the Foundation of the State Key Laboratory of Coal Conversion,China(Grant No.J22-23-103)。
文摘The structural transformation from a liquid into a crystalline solid is an important subject in condensed matter physics and materials science. In the present study, first-principles molecular dynamics calculations are performed to investigate the structure and properties of aluminum during the solidification which is induced by cooling and compression. In the cooling process and compression process, it is found that the icosahedral short-range order is initially enhanced and then begin to decay, the face-centered cubic short-range order eventually becomes dominant before it transforms into a crystalline solid.
基金Project(202302AB080024)supported by the Major Science and Technology Projects of the Science and Technology Department of Yunnan Province,ChinaProject(U21A20130)supported by the National Natural Science Foundation of China。
文摘The impact of cooling rate after solution heat treatment on exfoliation corrosion resistance of a Li-containing 7xxx aluminum alloy was investigated by accelerated immersion and electrochemical impedance spectroscopy test,optical microscope,electron backscatter diffraction and scanning transmission electron microscope.With the decrease of cooling rate from 1700℃/s to 4℃/s,exfoliation corrosion resistance of the aged specimens decreases with rating changing from EA to EC and the maximum corrosion depth increasing from about 169.4μm to 632.1μm.Exfoliation corrosion tends to develop along grain boundaries in the specimens with cooling rates higher than about 31℃/s and along both grain boundaries and sub-grain boundaries in the specimens with lower cooling rates.The reason has been discussed based on the changes of the microstructure and microchemistry at grain boundaries and sub-grain boundaries due to slow cooling.
基金provided by the National Natural Science Foundation of China (31901202,31672228)National Distinguished Expert Project (WQ20174400441)+2 种基金the Higher Education Department of Guangdong province (2020KCXTD025)Key Laboratory Project of Guangdong Province (2022B1212010015)the Australian Research Council (DP150101663)。
文摘Aluminum(Al)toxicity poses a significant constraint on field crop yields in acid soils.Zinc finger protein36(ZFP36)is well-documented for its pivotal role in enhancing tolerance to both drought and oxidative stress in rice.This study unveils a novel function of ZFP36 modulated by abscisic acid(ABA)-dependent mechanisms,specifically aimed at alleviating Al toxicity in rice.Under Al stress,the expression of ZFP36significantly increased through an ABA-dependent pathway.Knocking down ZFP36 heightened Al sensitivity,while overexpressing ZFP36 conferred increased resistance to Al stress.Additionally,our investigations revealed a physical interaction between ZFP36 and pyruvate dehydrogenase kinase 1 in rice(OsPDK1).Biochemical assays further elucidated that OsPDK1 phosphorylates ZFP36 at the amino acid site 73–161.Subsequent experiments demonstrated that ZFP36 positively regulates the expression of ascorbate peroxidases(OsAPX1)and OsALS1 by binding to specific elements in their upstream segments in rice.Through genetic and phenotypic analyses,we unveiled that OsPDK1 influences ABA-triggered antioxidant defense to alleviate Al toxicity by interacting with ZFP36.In summary,our study underscores that pyruvate dehydrogenase kinase 1(OsPDK1)phosphorylates ZFP36 to modulate the activities of antioxidant enzymes via an ABA-dependent pathway,influencing tolerance of rice to soil Al toxicity.
基金supported by Natural Science Foundation (Grant No.21975024)Natural Science Foundation of Inner Mongolia Autonomous Region (Grant No.2021BS05014)。
文摘Coating modification is an important way to enhance the reactivity of aluminum powder.In this paper,ammonium perchlorate and aluminum powder were assembled into energetic microunits by liquid deposition method.Spherical particles with AP as shell and ultrafine aluminum powder as the core(Al@AP)were gained.The micromorphology results show that the coated particles are about 5μm,and the coating layer is evenly distributed on the outer surface of aluminum powder,indicating a complete coating.The energetic microunits were implanted into the nitrate ester plasticizing adhesive system(NEPE)as solid phase fillers.The effect of filler on the rheological properties,safety,mechanical properties,thermal reaction and energy properties of the system was analyzed by comparing with the raw aluminum filler.The test results show that the rheological properties,mechanical properties and pressure index of NEPE containing system Al@AP meets the requirements of solid propellant charging.Compared with Al based propellant,the mechanical sensitivity and thermal sensitivity are decreased,the safety is better,and the explosion heat of the propellant is increased by 7.8%.The engine test shows that the specific impulse is increased by 1.2 s.Al@AP can improve the energy output and safety of NEPE propellant,and has potential application prospects in high-energy propellants.
基金Funded by the Central Government Guides Local Funds for Science and Technology Development(No.YDZJSX20231A045)the Fundamental Research Program of Shanxi Province(Nos.202103021223288 and 202103021224282)。
文摘The evolution of microstructure during hot deformation is key to achieving good mechanical properties in aluminum alloys.We have developed a cellular automaton(CA) based model to simulate the microstructural evolution in 7075 aluminum alloy during hot deformation.Isothermal compression tests were conducted to obtain material parameters for 7075 aluminum alloy,leading to the establishment of models for dislocation density,nucleation of recrystallized grains,and grain growth.Integrating these aspects with grain topological deformation,our CA model effectively predicts flow stress,dynamic recrystallization(DRX) volume fraction,and average grain size under diverse deformation conditions.A systematic comparison was made between electron back scattered diffraction(EBSD) maps and CA model simulated under different deformation temperatures(573 to 723 K),strain rates(0.001 to 1 s^(-1)),and strain amounts(30% to 70%).These analyses indicate that large strain,high temperature,and low strain rate facilitate dynamic recrystallization and grain refinement.The results from the CA model show good accuracy and predictive capability,with experimental error within 10%.
基金supported by National Natural Science Foundation of China(Grant No.51872196)China Postdoctoral Science Foundation Special Fund for the Third Batch(Grant No.2021TQ0200),China Postdoctoral Science Foundation Project for the 71st Batch(Grant No.2022M712034)+1 种基金the Carbon Peaking and Carbon Neutrality Technology Innovation Special Fund of Jiangsu Province(Grant number:BE2022041)Open Foundation of Shanghai Jiao Tong University Shaoxing Research Institute of Renewable Energy and Molecular Engineering(Grant number:JDSX2022023)。
文摘Aluminum(Al),the most abundant metallic element on the earth crust,has been reckoned as a promising battery material for its the highest theoretical volume capacity(8046 mAh cm^(-3)).Being rechargeable in ionic liquid electrolytes,however,the Al anode and battery case suffer from corrosion.On the other hand,Al is irreversible in aqueous electrolyte with severe hydrogen evolution reaction.Here,we demonstrate a water-in-salt aluminum ion electrolyte(WISE)based on Al and lithium salts to tackle the above challenges.In the WISE system,water molecules can be confined within the Li^(+)solvation structures.This diminished Al^(3+)-H_(2)O interaction essentially eliminates the hydrolysis effect,effectively protecting Al anode from corrosion.Therefore,long-term Al plating/stripping can be realized.Furthermore,two types of high-performance full batteries have been demonstrated using copper hexacyanoferrate(CuHCF,a Prussian Blue Analogues)and LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM)as cathodes.The reversibility of Al anode laid the foundation for low cost rechargeable batteries suffering for large-scale energy storage.Broader context:Al batteries are expected to become a safe and sustainable alternative to lithium batteries.For decades,chase for a feasible Al secondary battery has not been successful.The key challenge is to find suitable cathode and electrolyte materials,together with which Al anode battery can function reversibly.Currently,fatal drawbacks have impeded the practical application of Al metal batteries(AMBs),such as sustained corrosion of Al anode and battery case in ionic liquid electrolytes,irreversibility issues as well as severe hydrogen evolution reaction during cycling in aqueous electrolyte.Therefore,electrolyte and their electrochemical kinetics play a vital role in the performance and environmental operating limitations of high-energy Al metal batteries.In this work,we demonstrate a nearly neutral Al ion water-in-salt electrolyte(WISE)to tackle the above challenges.The WISE shows excellent stability in the open atmosphere.The distinct solvation-sheath structure of Al^(3+)in the WISE system would protect Al metal anodes from corrosion and eliminate hydrogen evolution reaction effectively,further promoting the reversibility of Al metal anodes with dendrite-free morphology.Moreover,such a WISE exhibits superior compatibility with LiNi_(0.3)Co_(0.3)Mn_(0.3)O_(2)(NCM)and copper hexacyanoferrate(CuHCF)cathodes and long-term stabilities with high coulombic efficiency(CE)can be attained for full batteries with the WISE.The approach in this study can furnish an opportunity to develop reversible AMBs and lay the foundation for other potential multivalent-metalbased secondary batteries suffering from interface passivation and poor reversibility,which suggest the promise of multivalent metal batteries and their applications in large-scale energy storage.
基金supported by the Guangdong Basic and Applied Basic Research Foundation,China(No.2023A1515012146)the National Natural Science Foundation of China(No.52271083)+1 种基金the Fundamental Research Funds for the Central Universities,China(No.22qntd0801)the Shanghai Engineering Technology Research Centre of Deep Offshore Material,China(No.19DZ2253100)。
文摘The effect of ultraviolet(UV)radiation and biocide benzalkonium chloride(BKC)on fungal-induced corrosion of AA7075 induced by Aspergillus terreus(A.terreus)was deeply studied using analysis of biological activity,surface analysis,and electrochemical measurements.Results demonstrated that the planktonic and sessile spore concentrations decline by more than two orders of magnitude when UV radiation and BKC are combinedly used compared with the control.UV radiation can inhibit the biological activity of A.terreus and influence the stability of passive film of AA7075.Except for direct disinfection,the physical adsorption of BKC on the specimen can effectively inhibit the attachment of A.terreus.The combination of UV radiation and BKC can much more effectively inhibit the corrosion of AA,especially pitting corrosion,due to their synergistic effect.The combined application of UV radiation and BKC can be a good method to effectively inhibit fungal-induced corrosion.
