Background:The active components of Horcha-6 were identified using liquid chromatography with tandem mass spectrometry.Also,we investigated the potential mechanisms that explain why Horcha-6 may be effective in treati...Background:The active components of Horcha-6 were identified using liquid chromatography with tandem mass spectrometry.Also,we investigated the potential mechanisms that explain why Horcha-6 may be effective in treating migraines through the use of network pharmacology and a rat migraine model.Methods:After identifying the active components of Horcha-6,the corresponding genes of the active components’target were obtained from the Universal Protein database,and a“compound-target-disease”network was constructed using Cytoscape 3.9.0 software.For the in vivo experiments,nitroglycerin was injected intraperitoneally into rats to create a migraine model.Pre-treatment with Horcha-6 was administered orally for 14 days,and rats were subjected to migraine-related behavior tests.RNA sequencing was performed to identify the gene expression regulated by Horcha-6 in the trigeminal nerve.Results:A total of 903 chemical components of Horcha-6 have been collected in the liquid chromatography with tandem mass spectrometry.We discovered 55 of the Horcha-6 bio-active components that were evaluated based on their Percent Human Oral Absorption(≥30%)and DL values(≥0.185)on the traditional Chinese medicine systems pharmacology database.The“compound-target-disease”network contained 163 intersection targets with the migraine state.Gene Ontology analysis indicated that these components significantly regulated the immune response,vascular function,oxidative stress,etc.When Kyoto Encyclopedia of Genes and Genomes enrichment analysis was performed,we observed that most of the target genes were significantly enriched in the inflammation and neuro-related signaling pathway,toll-like receptor signaling pathway,neuroactive ligand-receptor interaction,etc.These predictions were further demonstrated via in vivo animal model experiments.The RNA sequencing results showed that 41 genes were down-regulated(P<0.05)and 86 genes were up-regulated(P<0.05)in the Horcha-6 treated group compared with the untreated group.Those genes were mainly involved in neuromodulation,vascular function,and hormone metabolism.Conclusion:The 55 bio-active components in Horcha-6 regulate inflammation,hormone metabolism,and neurotransmitters and have potential as a therapy to treat migraines.展开更多
Design of internal combustion engine (ICE) components is one of the earliest and also the most active areas in which computer aided modeling techniques are applied. Computer aided modeling techniques could provide req...Design of internal combustion engine (ICE) components is one of the earliest and also the most active areas in which computer aided modeling techniques are applied. Computer aided modeling techniques could provide requisite information for follow up designing segments such as structural analysis, design of technological process and manufacturing etc, and thereby lead to the reduction of product design period and the quality and reliability improvement of ICE components. So the developing situations of ICE components' 2 D drafting, 3 D modeling of ICE, overall CAD of ICE as well as component design expert system etc. are surveyed, which are the typical applications of computer aided modeling techniques in ICE component design process, and some existent problems and tasks are pointed out so as to make some references for the further research work.展开更多
Bayes decision rule of variance components for one-way random effects model is derived and empirical Bayes (EB) decision rules are constructed by kernel estimation method. Under suitable conditions, it is shown that t...Bayes decision rule of variance components for one-way random effects model is derived and empirical Bayes (EB) decision rules are constructed by kernel estimation method. Under suitable conditions, it is shown that the proposed EB decision rules are asymptotically optimal with convergence rates near O(n-1/2). Finally, an example concerning the main result is given.展开更多
Resources are the base and core of education information, but current web education resources have no structure and it is still difficult to reuse them and make them can be self assembled and developed continually. Ac...Resources are the base and core of education information, but current web education resources have no structure and it is still difficult to reuse them and make them can be self assembled and developed continually. According to the knowledge structure of course and text, the relation among knowledge points, knowledge units from three levels of media material, we can build education resource components, and build TKCM （Teaching Knowledge Combination Model） based on resource components. Builders can build and assemble knowledge system structure and make knowledge units can be self assembled, thus we can develop and consummate them continually. Users can make knowledge units can be self assembled and renewed, and build education knowledge system to satisfy users＇ demand under the form of education knowledge system.展开更多
A three-dimensional numerical model of laser-arc hybrid plasma for aluminum alloy fillet joints is developed in this study.This mod-el accounts for the geometric complexity of fillet joints,the physical properties of ...A three-dimensional numerical model of laser-arc hybrid plasma for aluminum alloy fillet joints is developed in this study.This mod-el accounts for the geometric complexity of fillet joints,the physical properties of shielding gases with varying He-Ar ratios,and the coupling between arc plasma and laser-induced metal plume.The accuracy of the model is validated using a high-speed camera.The effects of varying He contents in the shielding gas on both the temperature and flow velocity of hybrid plasma,as well as the distribu-tion of laser-induced metal vapor mass,were investigated separately.The maximum temperature and size of arc plasma decrease as the He volume ratio increases,the arc distribution becomes more concentrated,and its flow velocity initially decreases and then sharply increases.At high helium content,both the flow velocity of hybrid plasma and metal vapor are high,the metal vapor is con-centrated on the right side of keyhole,and its flow appears chaotic.The flow state of arc plasma is most stable when the shielding gas consists of 50%He+50%Ar.展开更多
Demand forecasting and big data analytics in supply chain management are gaining interest.This is attributed to the wide range of big data analytics in supply chain management,in addition to demand forecasting,and beh...Demand forecasting and big data analytics in supply chain management are gaining interest.This is attributed to the wide range of big data analytics in supply chain management,in addition to demand forecasting,and behavioral analysis.In this article,we studied the application of big data analytics forecasting in supply chain demand forecasting in the automotive parts industry to propose classifications of these applications,identify gaps,and provide ideas for future research.Algorithms will then be classified and then applied in supply chain management such as neural networks,k-nearest neighbors,time series forecasting,clustering,regression analysis,support vector regression and support vector machines.An extensive hierarchical model for short-term auto parts demand assess-ment was employed to avoid the shortcomings of the earlier models and to close the gap that regarded mainly a single time series.The concept of extensive relevance assessment was proposed,and subsequently methods to reflect the relevance of automotive demand factors were discussed.Using a wide range of skills,the factors and co-factors are expressed in the form of a correlation characteristic matrix to ensure the degree of influence of each factor on the demand for automotive components.Then,it is compared with the existing data and predicted the short-term historical data.The result proved the predictive error is less than 6%,which supports the validity of the prediction method.This research offers the basis for the macroeconomic regulation of the government and the production of auto parts manufacturers.展开更多
To investigate the vibration principle in machining thin-walled components, a dynamic model for end milling of flexible structures is built based on considering the variations in the dynamic chip thickness and the dif...To investigate the vibration principle in machining thin-walled components, a dynamic model for end milling of flexible structures is built based on considering the variations in the dynamic chip thickness and the differences between up-milling and down-milling. Two milling experiments verify the model. Experimental results show that the model can predict the milling force and displacements simultaneously in the dynamic milling process.展开更多
The Weather Research and Forecasting/Chemistry model （WRF-Chem） was updated by including pho- toexeited nitrogen dioxide （NO2） molecules, heterogeneous reactions on aerosol surfaces, and direct emissions of nitrou...The Weather Research and Forecasting/Chemistry model （WRF-Chem） was updated by including pho- toexeited nitrogen dioxide （NO2） molecules, heterogeneous reactions on aerosol surfaces, and direct emissions of nitrous acid （HONO） in the Carbon-Bond Mechanism Z （CBM-Z）. Five simulations were conducted to assess the effects of each new component and the three additional HONO sources on concentrations of major chemical components. We calculated percentage changes of major aerosol components and concentration ratios of gas NOy （NOyg） to NOy and particulate nitrates （NO3-） to NOy due to the three additional HONO sources in the North China Plain in August of 2007. Our results indicate that when the three additional HONO sources are included, WRF-Chem can reasonably reproduce the HONO observations. Heterogeneous reactions on aerosol surfaces are a key contributor to concentrations of HONO, nitrates （NO3-）, ammonium （NH＋）, and PM2.5 （concentration of particulate matter of ≤2.5 um in the ambient air） across the North China Plain. The three additional HONO sources produced a -5% -20% increase in monthly mean daytime concentration ratios of NO3-/NOy, a -15%- 52% increase in maximum hourly mean concentration ratios of NO3-/NOy, and a -10% -50% increase in monthly mean concentrations of NOx and NH＋ across large areas of the North China Plain. For the Bohai Bay, the largest hourly increases of NO3- exceeded 90%, of NH＋ exceeded 80%, and of PM2.5 exceeded 40%, due to the three additional HONO sources. This implies that the three additional HONO sources can aggravate regional air pollution, further impair visibility, and enhance the incidence of haze in some industrialized regions with high emissions of NOx and particulate matter under favorable meteorological conditions.展开更多
Complicated changes are happening during the aging process of flue-cured tobacco （FCT） and understanding of the changing components is of great significance in improving the quality,shortening aging time,and enhanci...Complicated changes are happening during the aging process of flue-cured tobacco （FCT） and understanding of the changing components is of great significance in improving the quality,shortening aging time,and enhancing production and economic efficiency in tobacco industry.The aging samples of FCT from four main producing areas of China,i.e.,Yunnan,Sichuan,Hubei,and Dongbei,were used to study the changing rule of the components such as alkali,acid,and carbohydrate as well as the aroma and their relationship with sensory quality;and based on the correlation among the components and the sensory quality index,multivariable models were established to predict the aging quality.The results showed that the sensory quality of FCT increased steadily during the aging time,and at the same time,the acidic components （total organic acids,volatile acids） increased gradually,while the alkaline substances （nicotine,volatile alkali）,carbohydrate （total sugars,reducing sugar） and pH values showed a downward trend.Correlation analysis found that the sensory quality and pH values were negatively correlated （P0.05）,while the sensory quality with total organic acids and aroma were positively correlated.The optimal model for predicting the quality of FCT was y=56.75-0.63x12＋50.09x2-13.27x22,（y：sensory quality;x1：pH;x2：total organic acids）.The average predicating error was 1.04% with maximum predicating error of 2.89% and the accuracy rate of above 97%.展开更多
The induced airfl w from passing trains,which is recognized as train wind,usually has adverse impacts on people in the surroundings,i.e.,the aerodynamic forces generated by a high-speed train＇s wind may act on the hu...The induced airfl w from passing trains,which is recognized as train wind,usually has adverse impacts on people in the surroundings,i.e.,the aerodynamic forces generated by a high-speed train＇s wind may act on the human body and endanger the safety of pedestrians or roadside workers.In this paper,an improved delayed detached eddy simulation（IDDES） method is used to study train wind.The effects of the affiliate components and train length on train wind are analyzed.The results indicate that the aff liated components and train length have no effect on train wind in the area in front of the leading nose.In the downstream and wake regions,the longitudinal train wind becomes stronger as the length of the train increases,while the transverse train wind is not affected.The presence of affiliate components strengthens the train wind in the near fiel of the train because of strong fl w solid interactions but has limited effects on train wind in the far field.展开更多
With the rapid progress of component technology,the software development methodology of gathering a large number of components for designing complex software systems has matured.But,how to assess the application relia...With the rapid progress of component technology,the software development methodology of gathering a large number of components for designing complex software systems has matured.But,how to assess the application reliability accurately with the information of system architecture and the components reliabilities together has become a knotty problem.In this paper,the defects in formal description of software architecture and the limitations in existed model assumptions are both analyzed.Moreover,a new software reliability model called Component Interaction Mode(CIM) is proposed.With this model,the problem for existed component-based software reliability analysis models that cannot deal with the cases of component interaction with non-failure independent and non-random control transition is resolved.At last,the practice examples are presented to illustrate the effectiveness of this model.展开更多
For plant-wide processes with multiple operating conditions,the multimode feature imposes some challenges to conventional monitoring techniques.Hence,to solve this problem,this paper provides a novel local component b...For plant-wide processes with multiple operating conditions,the multimode feature imposes some challenges to conventional monitoring techniques.Hence,to solve this problem,this paper provides a novel local component based principal component analysis(LCPCA)approach for monitoring the status of a multimode process.In LCPCA,the process prior knowledge of mode division is not required and it purely based on the process data.Firstly,LCPCA divides the processes data into multiple local components using finite Gaussian mixture model mixture(FGMM).Then,calculating the posterior probability is applied to determine each sample belonging to which local component.After that,the local component information(such as mean and standard deviation)is used to standardize each sample of local component.Finally,the standardized samples of each local component are combined to train PCA monitoring model.Based on the PCA monitoring model,two monitoring statistics T^(2) and SPE are used for monitoring multimode processes.Through a numerical example and the Tennessee Eastman(TE)process,the monitoring result demonstrates that LCPCA outperformed conventional PCA and LNS-PCA in the fault detection rate.展开更多
To analyze the factors affecting the leakage rate of water distribution system, we built a macroscopic "leakage rate–leakage factors"(LRLF) model. In this model, we consider the pipe attributes(quality, dia...To analyze the factors affecting the leakage rate of water distribution system, we built a macroscopic "leakage rate–leakage factors"(LRLF) model. In this model, we consider the pipe attributes(quality, diameter,age), maintenance cost, valve replacement cost, and annual average pressure. Based on variable selection and principal component analysis results, we extracted three main principle components—the pipe attribute principal component(PAPC), operation management principal component, and water pressure principal component. Of these, we found PAPC to have the most influence. Using principal component regression, we established an LRLF model with no detectable serial correlations. The adjusted R2 and RMSE values of the model were 0.717 and 2.067, respectively.This model represents a potentially useful tool for controlling leakage rate from the macroscopic viewpoint.展开更多
A sub-regular solution model SELFSReM4 used to evaluate activities of the components in a homogeneous region of a quaternary system has been developed in Shanghai Enhanced Lab of Ferrometallurgy. This paper introduces...A sub-regular solution model SELFSReM4 used to evaluate activities of the components in a homogeneous region of a quaternary system has been developed in Shanghai Enhanced Lab of Ferrometallurgy. This paper introduces the application of SELFSReM4 in evaluating activities of the components in C-Mn-Fe-Si system without SiC precipitation.展开更多
The key problem in the computation of fluid dynamics using fine boundary-fitted grids is how to improve the numerical stability and decrease the calculating quantity. To solve this problem, implicit schemes should be ...The key problem in the computation of fluid dynamics using fine boundary-fitted grids is how to improve the numerical stability and decrease the calculating quantity. To solve this problem, implicit schemes should be adopted since explicit schemes may bring about a great increase in computation quantity according to the Courant-FrledrichsLewy condition. Whereas the adoption of implicit schemes is difficult to be realized because of the existence of two partial derivatives of surface elevations with respect to variables of alternative direction coordinates in each momentum equation in non-rectangular coordinates. With an aim to design an implicit scheme in non-reetangular ccordinates in the present paper, new momentum equations with the contravariant components of velocity vector are derived based on the shallow water dynamic equations in generalized curvilinear coordinates. In each equation, the coefficients before the two detivatives of surface elevations have different orders of magnitude, i. e., the derivative with the larger ceefficient rnay play a more important role than that with the smaller one. With this advantage, the ADI scheme can then be easily employed to improve the numerical stability and decrease the calculating quantity. The calculation in a harbour and a channel in Macau nearshore area shows that the implicit model is effective in calculating current fields in small size areas.展开更多
A sub-regular solution model SELF-SReM4 used to evaluate activity of the components in a homogeneous region of a quaternary system has been developed in Shanghai Enhanced Laboratory of Ferrometallurgy.The application ...A sub-regular solution model SELF-SReM4 used to evaluate activity of the components in a homogeneous region of a quaternary system has been developed in Shanghai Enhanced Laboratory of Ferrometallurgy.The application of SELF-SReM4 in C-Mn-Fe-Si system without the SiC formation has been introduced in previous paper.It’s application for molten slag of MnO-SiO2-Al2O3-CaO was introduced in this paper.They provide a basis for the prediction of the metal-slag equilibrium conditions.展开更多
The solution of the grey model(GM(1,1)model)generally involves equal-precision observations,and the(co)variance matrix is established from the prior information.However,the data are generally available with unequal-pr...The solution of the grey model(GM(1,1)model)generally involves equal-precision observations,and the(co)variance matrix is established from the prior information.However,the data are generally available with unequal-precision measurements in reality.To deal with the errors of all observations for GM(1,1)model with errors-in-variables(EIV)structure,we exploit the total least-squares(TLS)algorithm to estimate the parameters of GM(1,1)model in this paper.Ignoring that the effect of the improper prior stochastic model and the homologous observations may degrade the accuracy of parameter estimation,we further present a nonlinear total least-squares variance component estimation approach for GM(1,1)model,which resorts to the minimum norm quadratic unbiased estimation(MINQUE).The practical and simulative experiments indicate that the presented approach has significant merits in improving the predictive accuracy in comparison with control methods.展开更多
The large blast furnace is essential equipment in the process of iron and steel manufacturing. Due to the complex operation process and frequent fluctuations of variables, conventional monitoring methods often bring f...The large blast furnace is essential equipment in the process of iron and steel manufacturing. Due to the complex operation process and frequent fluctuations of variables, conventional monitoring methods often bring false alarms. To address the above problem, an ensemble of greedy dynamic principal component analysis-Gaussian mixture model(EGDPCA-GMM) is proposed in this paper. First, PCA-GMM is introduced to deal with the collinearity and the non-Gaussian distribution of blast furnace data.Second, in order to explain the dynamics of data, the greedy algorithm is used to determine the extended variables and their corresponding time lags, so as to avoid introducing unnecessary noise. Then the bagging ensemble is adopted to cooperate with greedy extension to eliminate the randomness brought by the greedy algorithm and further reduce the false alarm rate(FAR) of monitoring results. Finally, the algorithm is applied to the blast furnace of a large iron and steel group in South China to verify performance.Compared with the basic algorithms, the proposed method achieves lowest FAR, while keeping missed alarm rate(MAR) remain stable.展开更多
Since water resources of the Heihe River Basin are primarily in the form of surface runoff in the Qilian Mountains,identifying its sources and components is essential for researchers to understand water cycling and tr...Since water resources of the Heihe River Basin are primarily in the form of surface runoff in the Qilian Mountains,identifying its sources and components is essential for researchers to understand water cycling and transformation in the basin.It will help to properly exploit water resources,and contribute to ecological environment construction.The paper uses the isotope data of hydrogen and oxygen in water and hydrochemistry data collected at a high altitude to trace the sources of surface runoff in Heihe River in rainy season and uses the three-component mixing model to estimate the contribution of each component to runoff.Results indicate that surface water consists of precipitation,melt water and groundwater,with precipitation being the primary component and contributing to 59%-64%of runoff.Melt water and groundwater account for 15%-25%and 12%-22%,respectively.Precipitation accounts for 60%,groundwater for 22%and glacial melt water for 18%of the outflow in the main stream of the Heihe River.The composition is of great significance for water cycling and conversion research as well as water resource evaluation and management.展开更多
A technology for unintended lane departure warning was proposed. As crucial information, lane boundaries were detected based on principal component analysis of grayscale distribution in search bars of given number and...A technology for unintended lane departure warning was proposed. As crucial information, lane boundaries were detected based on principal component analysis of grayscale distribution in search bars of given number and then each search bar was tracked using Kalman filter between frames. The lane detection performance was evaluated and demonstrated in ways of receiver operating characteristic, dice similarity coefficient and real-time performance. For lane departure detection, a lane departure risk evaluation model based on lasting time and frequency was effectively executed on the ARM-based platform. Experimental results indicate that the algorithm generates satisfactory lane detection results under different traffic and lighting conditions, and the proposed warning mechanism sends effective warning signals, avoiding most false warning.展开更多
基金supported by grants The Natural Science Foundation of Inner Mongolia(2019MS08104)The Natural Science Foundation of Inner Mongolia(2022ZD09)The Central Government Guiding Special Funds for Development of Local Science and Technology(2020ZY0020).
文摘Background:The active components of Horcha-6 were identified using liquid chromatography with tandem mass spectrometry.Also,we investigated the potential mechanisms that explain why Horcha-6 may be effective in treating migraines through the use of network pharmacology and a rat migraine model.Methods:After identifying the active components of Horcha-6,the corresponding genes of the active components’target were obtained from the Universal Protein database,and a“compound-target-disease”network was constructed using Cytoscape 3.9.0 software.For the in vivo experiments,nitroglycerin was injected intraperitoneally into rats to create a migraine model.Pre-treatment with Horcha-6 was administered orally for 14 days,and rats were subjected to migraine-related behavior tests.RNA sequencing was performed to identify the gene expression regulated by Horcha-6 in the trigeminal nerve.Results:A total of 903 chemical components of Horcha-6 have been collected in the liquid chromatography with tandem mass spectrometry.We discovered 55 of the Horcha-6 bio-active components that were evaluated based on their Percent Human Oral Absorption(≥30%)and DL values(≥0.185)on the traditional Chinese medicine systems pharmacology database.The“compound-target-disease”network contained 163 intersection targets with the migraine state.Gene Ontology analysis indicated that these components significantly regulated the immune response,vascular function,oxidative stress,etc.When Kyoto Encyclopedia of Genes and Genomes enrichment analysis was performed,we observed that most of the target genes were significantly enriched in the inflammation and neuro-related signaling pathway,toll-like receptor signaling pathway,neuroactive ligand-receptor interaction,etc.These predictions were further demonstrated via in vivo animal model experiments.The RNA sequencing results showed that 41 genes were down-regulated(P<0.05)and 86 genes were up-regulated(P<0.05)in the Horcha-6 treated group compared with the untreated group.Those genes were mainly involved in neuromodulation,vascular function,and hormone metabolism.Conclusion:The 55 bio-active components in Horcha-6 regulate inflammation,hormone metabolism,and neurotransmitters and have potential as a therapy to treat migraines.
文摘Design of internal combustion engine (ICE) components is one of the earliest and also the most active areas in which computer aided modeling techniques are applied. Computer aided modeling techniques could provide requisite information for follow up designing segments such as structural analysis, design of technological process and manufacturing etc, and thereby lead to the reduction of product design period and the quality and reliability improvement of ICE components. So the developing situations of ICE components' 2 D drafting, 3 D modeling of ICE, overall CAD of ICE as well as component design expert system etc. are surveyed, which are the typical applications of computer aided modeling techniques in ICE component design process, and some existent problems and tasks are pointed out so as to make some references for the further research work.
基金The project is partly supported by NSFC (19971085)the Doctoral Program Foundation of the Institute of High Education and the Special Foundation of Chinese Academy of Sciences.
文摘Bayes decision rule of variance components for one-way random effects model is derived and empirical Bayes (EB) decision rules are constructed by kernel estimation method. Under suitable conditions, it is shown that the proposed EB decision rules are asymptotically optimal with convergence rates near O(n-1/2). Finally, an example concerning the main result is given.
基金Supported by the National High Technology Research and Development Program of China (863 Program) (2002AA111010 2003AA001032)
文摘Resources are the base and core of education information, but current web education resources have no structure and it is still difficult to reuse them and make them can be self assembled and developed continually. According to the knowledge structure of course and text, the relation among knowledge points, knowledge units from three levels of media material, we can build education resource components, and build TKCM （Teaching Knowledge Combination Model） based on resource components. Builders can build and assemble knowledge system structure and make knowledge units can be self assembled, thus we can develop and consummate them continually. Users can make knowledge units can be self assembled and renewed, and build education knowledge system to satisfy users＇ demand under the form of education knowledge system.
基金supported by the National Natural Science Foundation of China(Grant No.52375340,51975263,52405366).
文摘A three-dimensional numerical model of laser-arc hybrid plasma for aluminum alloy fillet joints is developed in this study.This mod-el accounts for the geometric complexity of fillet joints,the physical properties of shielding gases with varying He-Ar ratios,and the coupling between arc plasma and laser-induced metal plume.The accuracy of the model is validated using a high-speed camera.The effects of varying He contents in the shielding gas on both the temperature and flow velocity of hybrid plasma,as well as the distribu-tion of laser-induced metal vapor mass,were investigated separately.The maximum temperature and size of arc plasma decrease as the He volume ratio increases,the arc distribution becomes more concentrated,and its flow velocity initially decreases and then sharply increases.At high helium content,both the flow velocity of hybrid plasma and metal vapor are high,the metal vapor is con-centrated on the right side of keyhole,and its flow appears chaotic.The flow state of arc plasma is most stable when the shielding gas consists of 50%He+50%Ar.
文摘Demand forecasting and big data analytics in supply chain management are gaining interest.This is attributed to the wide range of big data analytics in supply chain management,in addition to demand forecasting,and behavioral analysis.In this article,we studied the application of big data analytics forecasting in supply chain demand forecasting in the automotive parts industry to propose classifications of these applications,identify gaps,and provide ideas for future research.Algorithms will then be classified and then applied in supply chain management such as neural networks,k-nearest neighbors,time series forecasting,clustering,regression analysis,support vector regression and support vector machines.An extensive hierarchical model for short-term auto parts demand assess-ment was employed to avoid the shortcomings of the earlier models and to close the gap that regarded mainly a single time series.The concept of extensive relevance assessment was proposed,and subsequently methods to reflect the relevance of automotive demand factors were discussed.Using a wide range of skills,the factors and co-factors are expressed in the form of a correlation characteristic matrix to ensure the degree of influence of each factor on the demand for automotive components.Then,it is compared with the existing data and predicted the short-term historical data.The result proved the predictive error is less than 6%,which supports the validity of the prediction method.This research offers the basis for the macroeconomic regulation of the government and the production of auto parts manufacturers.
文摘To investigate the vibration principle in machining thin-walled components, a dynamic model for end milling of flexible structures is built based on considering the variations in the dynamic chip thickness and the differences between up-milling and down-milling. Two milling experiments verify the model. Experimental results show that the model can predict the milling force and displacements simultaneously in the dynamic milling process.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41175105 and 40905055)the Key Project of Chinese Academy of Sciences (Grant No. kzcx1-yw-06-04)
文摘The Weather Research and Forecasting/Chemistry model （WRF-Chem） was updated by including pho- toexeited nitrogen dioxide （NO2） molecules, heterogeneous reactions on aerosol surfaces, and direct emissions of nitrous acid （HONO） in the Carbon-Bond Mechanism Z （CBM-Z）. Five simulations were conducted to assess the effects of each new component and the three additional HONO sources on concentrations of major chemical components. We calculated percentage changes of major aerosol components and concentration ratios of gas NOy （NOyg） to NOy and particulate nitrates （NO3-） to NOy due to the three additional HONO sources in the North China Plain in August of 2007. Our results indicate that when the three additional HONO sources are included, WRF-Chem can reasonably reproduce the HONO observations. Heterogeneous reactions on aerosol surfaces are a key contributor to concentrations of HONO, nitrates （NO3-）, ammonium （NH＋）, and PM2.5 （concentration of particulate matter of ≤2.5 um in the ambient air） across the North China Plain. The three additional HONO sources produced a -5% -20% increase in monthly mean daytime concentration ratios of NO3-/NOy, a -15%- 52% increase in maximum hourly mean concentration ratios of NO3-/NOy, and a -10% -50% increase in monthly mean concentrations of NOx and NH＋ across large areas of the North China Plain. For the Bohai Bay, the largest hourly increases of NO3- exceeded 90%, of NH＋ exceeded 80%, and of PM2.5 exceeded 40%, due to the three additional HONO sources. This implies that the three additional HONO sources can aggravate regional air pollution, further impair visibility, and enhance the incidence of haze in some industrialized regions with high emissions of NOx and particulate matter under favorable meteorological conditions.
基金supported by the grants of the Application of Nuclear Techniques in Agriculture from Ministry of Agriculture of China (200803034)China Tobacco Company in Hubei (2006YL0229)China Tobacco Company in Yunnan (2009YN010)
文摘Complicated changes are happening during the aging process of flue-cured tobacco （FCT） and understanding of the changing components is of great significance in improving the quality,shortening aging time,and enhancing production and economic efficiency in tobacco industry.The aging samples of FCT from four main producing areas of China,i.e.,Yunnan,Sichuan,Hubei,and Dongbei,were used to study the changing rule of the components such as alkali,acid,and carbohydrate as well as the aroma and their relationship with sensory quality;and based on the correlation among the components and the sensory quality index,multivariable models were established to predict the aging quality.The results showed that the sensory quality of FCT increased steadily during the aging time,and at the same time,the acidic components （total organic acids,volatile acids） increased gradually,while the alkaline substances （nicotine,volatile alkali）,carbohydrate （total sugars,reducing sugar） and pH values showed a downward trend.Correlation analysis found that the sensory quality and pH values were negatively correlated （P0.05）,while the sensory quality with total organic acids and aroma were positively correlated.The optimal model for predicting the quality of FCT was y=56.75-0.63x12＋50.09x2-13.27x22,（y：sensory quality;x1：pH;x2：total organic acids）.The average predicating error was 1.04% with maximum predicating error of 2.89% and the accuracy rate of above 97%.
文摘The induced airfl w from passing trains,which is recognized as train wind,usually has adverse impacts on people in the surroundings,i.e.,the aerodynamic forces generated by a high-speed train＇s wind may act on the human body and endanger the safety of pedestrians or roadside workers.In this paper,an improved delayed detached eddy simulation（IDDES） method is used to study train wind.The effects of the affiliate components and train length on train wind are analyzed.The results indicate that the aff liated components and train length have no effect on train wind in the area in front of the leading nose.In the downstream and wake regions,the longitudinal train wind becomes stronger as the length of the train increases,while the transverse train wind is not affected.The presence of affiliate components strengthens the train wind in the near fiel of the train because of strong fl w solid interactions but has limited effects on train wind in the far field.
基金Supported by the National Natural Science Foundation of China (No. 60873195,60873003,and 61070220)the Doctoral Foundation of Ministry of Education (No.20090111110002)
文摘With the rapid progress of component technology,the software development methodology of gathering a large number of components for designing complex software systems has matured.But,how to assess the application reliability accurately with the information of system architecture and the components reliabilities together has become a knotty problem.In this paper,the defects in formal description of software architecture and the limitations in existed model assumptions are both analyzed.Moreover,a new software reliability model called Component Interaction Mode(CIM) is proposed.With this model,the problem for existed component-based software reliability analysis models that cannot deal with the cases of component interaction with non-failure independent and non-random control transition is resolved.At last,the practice examples are presented to illustrate the effectiveness of this model.
基金National Natural Science Foundation of China(61673279)。
文摘For plant-wide processes with multiple operating conditions,the multimode feature imposes some challenges to conventional monitoring techniques.Hence,to solve this problem,this paper provides a novel local component based principal component analysis(LCPCA)approach for monitoring the status of a multimode process.In LCPCA,the process prior knowledge of mode division is not required and it purely based on the process data.Firstly,LCPCA divides the processes data into multiple local components using finite Gaussian mixture model mixture(FGMM).Then,calculating the posterior probability is applied to determine each sample belonging to which local component.After that,the local component information(such as mean and standard deviation)is used to standardize each sample of local component.Finally,the standardized samples of each local component are combined to train PCA monitoring model.Based on the PCA monitoring model,two monitoring statistics T^(2) and SPE are used for monitoring multimode processes.Through a numerical example and the Tennessee Eastman(TE)process,the monitoring result demonstrates that LCPCA outperformed conventional PCA and LNS-PCA in the fault detection rate.
基金supported by the Ministry of Science and Technology of China (No.2014ZX07203-009)the Fundamental Research Funds for the Central Universitiesthe Program for New Century Excellent Talents at the University of China
文摘To analyze the factors affecting the leakage rate of water distribution system, we built a macroscopic "leakage rate–leakage factors"(LRLF) model. In this model, we consider the pipe attributes(quality, diameter,age), maintenance cost, valve replacement cost, and annual average pressure. Based on variable selection and principal component analysis results, we extracted three main principle components—the pipe attribute principal component(PAPC), operation management principal component, and water pressure principal component. Of these, we found PAPC to have the most influence. Using principal component regression, we established an LRLF model with no detectable serial correlations. The adjusted R2 and RMSE values of the model were 0.717 and 2.067, respectively.This model represents a potentially useful tool for controlling leakage rate from the macroscopic viewpoint.
文摘A sub-regular solution model SELFSReM4 used to evaluate activities of the components in a homogeneous region of a quaternary system has been developed in Shanghai Enhanced Lab of Ferrometallurgy. This paper introduces the application of SELFSReM4 in evaluating activities of the components in C-Mn-Fe-Si system without SiC precipitation.
文摘The key problem in the computation of fluid dynamics using fine boundary-fitted grids is how to improve the numerical stability and decrease the calculating quantity. To solve this problem, implicit schemes should be adopted since explicit schemes may bring about a great increase in computation quantity according to the Courant-FrledrichsLewy condition. Whereas the adoption of implicit schemes is difficult to be realized because of the existence of two partial derivatives of surface elevations with respect to variables of alternative direction coordinates in each momentum equation in non-rectangular coordinates. With an aim to design an implicit scheme in non-reetangular ccordinates in the present paper, new momentum equations with the contravariant components of velocity vector are derived based on the shallow water dynamic equations in generalized curvilinear coordinates. In each equation, the coefficients before the two detivatives of surface elevations have different orders of magnitude, i. e., the derivative with the larger ceefficient rnay play a more important role than that with the smaller one. With this advantage, the ADI scheme can then be easily employed to improve the numerical stability and decrease the calculating quantity. The calculation in a harbour and a channel in Macau nearshore area shows that the implicit model is effective in calculating current fields in small size areas.
文摘A sub-regular solution model SELF-SReM4 used to evaluate activity of the components in a homogeneous region of a quaternary system has been developed in Shanghai Enhanced Laboratory of Ferrometallurgy.The application of SELF-SReM4 in C-Mn-Fe-Si system without the SiC formation has been introduced in previous paper.It’s application for molten slag of MnO-SiO2-Al2O3-CaO was introduced in this paper.They provide a basis for the prediction of the metal-slag equilibrium conditions.
基金supported by the National Natural Science Foundation of China(No.41874001 and No.41664001)Support Program for Outstanding Youth Talents in Jiangxi Province(No.20162BCB23050)National Key Research and Development Program(No.2016YFB0501405)。
文摘The solution of the grey model(GM(1,1)model)generally involves equal-precision observations,and the(co)variance matrix is established from the prior information.However,the data are generally available with unequal-precision measurements in reality.To deal with the errors of all observations for GM(1,1)model with errors-in-variables(EIV)structure,we exploit the total least-squares(TLS)algorithm to estimate the parameters of GM(1,1)model in this paper.Ignoring that the effect of the improper prior stochastic model and the homologous observations may degrade the accuracy of parameter estimation,we further present a nonlinear total least-squares variance component estimation approach for GM(1,1)model,which resorts to the minimum norm quadratic unbiased estimation(MINQUE).The practical and simulative experiments indicate that the presented approach has significant merits in improving the predictive accuracy in comparison with control methods.
基金supported by the National Natural Science Foundation of China (61903326, 61933015)。
文摘The large blast furnace is essential equipment in the process of iron and steel manufacturing. Due to the complex operation process and frequent fluctuations of variables, conventional monitoring methods often bring false alarms. To address the above problem, an ensemble of greedy dynamic principal component analysis-Gaussian mixture model(EGDPCA-GMM) is proposed in this paper. First, PCA-GMM is introduced to deal with the collinearity and the non-Gaussian distribution of blast furnace data.Second, in order to explain the dynamics of data, the greedy algorithm is used to determine the extended variables and their corresponding time lags, so as to avoid introducing unnecessary noise. Then the bagging ensemble is adopted to cooperate with greedy extension to eliminate the randomness brought by the greedy algorithm and further reduce the false alarm rate(FAR) of monitoring results. Finally, the algorithm is applied to the blast furnace of a large iron and steel group in South China to verify performance.Compared with the basic algorithms, the proposed method achieves lowest FAR, while keeping missed alarm rate(MAR) remain stable.
基金China National Key R&D Program(No.2017YFC0406100).
文摘Since water resources of the Heihe River Basin are primarily in the form of surface runoff in the Qilian Mountains,identifying its sources and components is essential for researchers to understand water cycling and transformation in the basin.It will help to properly exploit water resources,and contribute to ecological environment construction.The paper uses the isotope data of hydrogen and oxygen in water and hydrochemistry data collected at a high altitude to trace the sources of surface runoff in Heihe River in rainy season and uses the three-component mixing model to estimate the contribution of each component to runoff.Results indicate that surface water consists of precipitation,melt water and groundwater,with precipitation being the primary component and contributing to 59%-64%of runoff.Melt water and groundwater account for 15%-25%and 12%-22%,respectively.Precipitation accounts for 60%,groundwater for 22%and glacial melt water for 18%of the outflow in the main stream of the Heihe River.The composition is of great significance for water cycling and conversion research as well as water resource evaluation and management.
基金Project(51175159)supported by the National Natural Science Foundation of ChinaProject(2013WK3024)supported by the Science andTechnology Planning Program of Hunan Province,ChinaProject(CX2013B146)supported by the Hunan Provincial InnovationFoundation for Postgraduate,China
文摘A technology for unintended lane departure warning was proposed. As crucial information, lane boundaries were detected based on principal component analysis of grayscale distribution in search bars of given number and then each search bar was tracked using Kalman filter between frames. The lane detection performance was evaluated and demonstrated in ways of receiver operating characteristic, dice similarity coefficient and real-time performance. For lane departure detection, a lane departure risk evaluation model based on lasting time and frequency was effectively executed on the ARM-based platform. Experimental results indicate that the algorithm generates satisfactory lane detection results under different traffic and lighting conditions, and the proposed warning mechanism sends effective warning signals, avoiding most false warning.
