In this paper, we design high-order Runge-Kutta discontinuous Galerkin (RKDG) methods with multi-resolution weighted essentially non-oscillatory (multi-resolution WENO) limiters to compute compressible steady-state pr...In this paper, we design high-order Runge-Kutta discontinuous Galerkin (RKDG) methods with multi-resolution weighted essentially non-oscillatory (multi-resolution WENO) limiters to compute compressible steady-state problems on triangular meshes. A troubled cell indicator extended from structured meshes to unstructured meshes is constructed to identify triangular cells in which the application of the limiting procedures is required. In such troubled cells, the multi-resolution WENO limiting methods are used to the hierarchical L^(2) projection polynomial sequence of the DG solution. Through using the RKDG methods with multi-resolution WENO limiters, the optimal high-order accuracy can be gradually reduced to first-order in the triangular troubled cells, so that the shock wave oscillations can be well suppressed. In steady-state simulations on triangular meshes, the numerical residual converges to near machine zero. The proposed spatial reconstruction methods enhance the robustness of classical DG methods on triangular meshes. The good results of these RKDG methods with multi-resolution WENO limiters are verified by a series of two-dimensional steady-state problems.展开更多
A novel VOF-type volume-tracking method for two-dimensional free-surface flows based on the unstructured triangular mesh is presented. Owing to the inherent merit of the unstructured triangular mesh in fitting curved ...A novel VOF-type volume-tracking method for two-dimensional free-surface flows based on the unstructured triangular mesh is presented. Owing to the inherent merit of the unstructured triangular mesh in fitting curved boundaries, this method can handle the free-surface problems with complex geometries accurately and directly, without introducing any complicated boundary treatment or artificial diffusion. The method solves the volume transport equation geometrically through the Modified Lagrangian-Eulerian Re-map （MLER） method, which is applied to advective fluid volumes. Moreover, the PLIC method is adopted to give a second-order reconstructed interface approximation. To validate this method, two advection tests were performed for the establishment of the accuracy and convergence rate of the solutions. Numerical results for these complex tests provide convincing evidence for the excellent solution quality and fidelity of the method.展开更多
Curvatures are important geometric attributes of surfaces. There are many applications that require as a first step the accurate estimation of curvatures at arbitrary vertices on a triangulated surface. Chen and Schmi...Curvatures are important geometric attributes of surfaces. There are many applications that require as a first step the accurate estimation of curvatures at arbitrary vertices on a triangulated surface. Chen and Schmitt (1992) and Taubin (1995) presented two simple methods to estimate principal curvatures. They used circular arcs to approximate the normal curvature. We find this may cause large error in some cases. In this paper, we describe a more accurate method to estimate the normal curvature, and present a novel algorithm to estimate principal curvatures by simplifying the Chen and Schmitt’s method. Some comparison results are also shown in this paper.展开更多
The characteristic of Quaternary codes is analyzed. The rule of distinguishing triangle direction is given out. An algorithm of neighbor finding by decomposing the Quaternary code from back to front is presented in th...The characteristic of Quaternary codes is analyzed. The rule of distinguishing triangle direction is given out. An algorithm of neighbor finding by decomposing the Quaternary code from back to front is presented in this paper. The contrastive analysis of time complexity between this algorithm and Bartholdi＇s algorithm is approached. The result illustrates that the average consumed time of this algorithm is about 23.66% of Bartholdi＇s algorithm.展开更多
In some scattered point cloud triangular mesh restoration algorithm, small triangular mesh holes problem will often affect the quality of the model. For small holes at the details, this paper propose a method for iden...In some scattered point cloud triangular mesh restoration algorithm, small triangular mesh holes problem will often affect the quality of the model. For small holes at the details, this paper propose a method for identifying and extracting hollow edge,and use a triangle growth way based on boundary edge angle to fill the empty void. First, according the relationship of the point, side and face of the triangle mesh model to identify the hole, then extracting the holes boundary edge and classifying it. Finally, using a triangle growth method based on holes boundary edge angle to fill each small holes separated from the boundary. Compared with other algorithm of filling holes, this method is high efficiency for small holes of smooth surface,and itimprovesthe quality of the triangular mesh model.展开更多
A new method as a post-processing step is presented to improve the shape quality of triangular meshes, which uses a topological clean up procedure and discrete smoothing interpolate (DSI) algorithm together. T...A new method as a post-processing step is presented to improve the shape quality of triangular meshes, which uses a topological clean up procedure and discrete smoothing interpolate (DSI) algorithm together. This method can improve the angle distribution of mesh element. while keeping the resulting meshes conform to the predefined constraints which are inputted as a PSLG.展开更多
The view prediction is an important step in stereo/multiview video coding, wherein, disparity estil mation （DE） is a key and difficult operation. DE algorithms usually require enormous computing power. A fast DE alg...The view prediction is an important step in stereo/multiview video coding, wherein, disparity estil mation （DE） is a key and difficult operation. DE algorithms usually require enormous computing power. A fast DE algorithm based on Delaunay triangulation （DT） is proposed. First, a flexible and content adaptive DT mesh is established on a target frame by an iterative split-merge algorithm. Second, DE on DT nodes are performed in a three-stage algorithm, which gives the majority of nodes a good estimate of the disparity vectors （DV）, by removing unreliable nodes due to occlusion, and forcing the minority of ＇problematic nodes＇ to be searched again, within their umbrella-shaped polygon, to the best. Finally, the target view is predicted by using affine transformation. Experimental results show that the proposed algorithm can give a satisfactory DE with less computational cost.展开更多
In the process of numerical control machining simulation,the workpiece surface is usually described with the uniform triangular mesh model.To alleviate the contradiction between the simulation speed and accuracy in th...In the process of numerical control machining simulation,the workpiece surface is usually described with the uniform triangular mesh model.To alleviate the contradiction between the simulation speed and accuracy in this model,two improved methods,i.e.,the local refinement triangular mesh modeling method and the adaptive triangular mesh modeling method were presented.The simulation results show that when the final shape of the workpiece is known and its mathematic representation is simple,the local refinement triangular mesh modeling method is preferred;when the final shape of the workpiece is unknown and its mathematic description is complicated,the adaptive triangular mesh modeling method is more suitable.The experimental results show that both methods are more targeted and practical and can meet the requirements of real-time and precision in simulation.展开更多
A new algorithm called the weighted least square discrete parameterization (WLSDP) is presented for the parameterization of triangular meshes over a convex planar region. This algorithm is the linear combination of th...A new algorithm called the weighted least square discrete parameterization (WLSDP) is presented for the parameterization of triangular meshes over a convex planar region. This algorithm is the linear combination of the discrete Conformal mapping(DCM) and the discrete Authalic mapping(DAM). It provides the good properties of both DCM and DAM, such as robustness and low distortion. By adjusting the scaling factor q embedded in the WLSDP, satisfactory parameterizations in different special applications can be achieved.展开更多
A stabilizer-free weak Galerkin(SFWG)finite element method was introduced and analyzed in Ye and Zhang(SIAM J.Numer.Anal.58:2572–2588,2020)for the biharmonic equation,which has an ultra simple finite element formulat...A stabilizer-free weak Galerkin(SFWG)finite element method was introduced and analyzed in Ye and Zhang(SIAM J.Numer.Anal.58:2572–2588,2020)for the biharmonic equation,which has an ultra simple finite element formulation.This work is a continuation of our investigation of the SFWG method for the biharmonic equation.The new SFWG method is highly accurate with a convergence rate of four orders higher than the optimal order of convergence in both the energy norm and the L^(2)norm on triangular grids.This new method also keeps the formulation that is symmetric,positive definite,and stabilizer-free.Four-order superconvergence error estimates are proved for the corresponding SFWG finite element solutions in a discrete H^(2)norm.Superconvergence of four orders in the L^(2)norm is also derived for k≥3,where k is the degree of the approximation polynomial.The postprocessing is proved to lift a P_(k)SFWG solution to a P_(k+4)solution elementwise which converges at the optimal order.Numerical examples are tested to verify the theor ies.展开更多
In tidal areas, natural land boundary is complex and underwater topographyvaries acutely due to influence of upstream runoff and outer tide. The simulation and forecast ofwater current and mass transport play an impor...In tidal areas, natural land boundary is complex and underwater topographyvaries acutely due to influence of upstream runoff and outer tide. The simulation and forecast ofwater current and mass transport play an important role in practical engineering. According to thesituation of irregular natural boundaries in tidal region, unsturctured triangular grid arrangementis applied to suit for complex conditions. A finite difference method with alternating directionalimplicit scheme for triangular grid is established in this paper. The model has been applied incalculation of flow and concentration fields for Nantong reach of the Yangtze River. It is satisfiedthat the calculated values are in agreement with observed data.展开更多
We present a novel algorithm for adaptive triangular mesh coarsening. The algorithm has two stages. First, the input triangular mesh is refined by iteratively applying the adaptive subdivision operator that performs a...We present a novel algorithm for adaptive triangular mesh coarsening. The algorithm has two stages. First, the input triangular mesh is refined by iteratively applying the adaptive subdivision operator that performs a so-called red-green split. Second, the refined mesh is simplified by a clustering algorithm based on centroidal Voronoi tessellations (CVTs). The accuracy and good quality of the output triangular mesh are achieved by combining adaptive subdivision and the CVTs technique. Test results showed the mesh coarsening scheme to be robust and effective. Examples are shown that validate the method.展开更多
We present an efficient spherical parameterization approach aimed at simultaneously reducing area and angle dis-tortions. We generate the final spherical mapping by independently establishing two hemisphere parameteri...We present an efficient spherical parameterization approach aimed at simultaneously reducing area and angle dis-tortions. We generate the final spherical mapping by independently establishing two hemisphere parameterizations. The essence of the approach is to reduce spherical parameterization to a planar problem using symmetry analysis of 3D meshes. Experiments and comparisons were undertaken with various non-trivial 3D models, which revealed that our approach is efficient and robust. In particular, our method produces almost isometric parameterizations for the objects close to the sphere.展开更多
We modify the construction of the third order finite volume WENO scheme on triangular meshes and present a simplified WENO(SWENO)scheme.The novelty of the SWENO scheme is the less complexity and lower computational co...We modify the construction of the third order finite volume WENO scheme on triangular meshes and present a simplified WENO(SWENO)scheme.The novelty of the SWENO scheme is the less complexity and lower computational cost when deciding the smoothest stencil through a simple mechanism.The LU decomposition with iterative refinement is adopted to implement ill-conditioned interpolation matrices and improves the stability of the SWENOscheme efficiently.Besides,a scaling technique is used to circument the growth of condition numbers as mesh refined.However,weak oscillations still appear when the SWENO scheme deals with complex low density equations.In order to guarantee the maximum-principle-preserving(MPP)property,we apply a scaling limiter to the reconstruction polynomial without the loss of accuracy.A novel procedure is designed to prove this property theoretically.Finally,numerical examples for one-and two-dimensional problems are presented to verify the good performance,maximum principle preserving,essentially non-oscillation and high resolution of the proposed scheme.展开更多
In this paper,a new multi-resolution weighted essentially non-oscillatory(MR-WENO)limiter for high-order local discontinuous Galerkin(LDG)method is designed for solving Navier-Stokes equations on triangular meshes.Thi...In this paper,a new multi-resolution weighted essentially non-oscillatory(MR-WENO)limiter for high-order local discontinuous Galerkin(LDG)method is designed for solving Navier-Stokes equations on triangular meshes.This MR-WENO limiter is a new extension of the finite volume MR-WENO schemes.Such new limiter uses information of the LDG solution essentially only within the troubled cell itself,to build a sequence of hierarchical L^(2)projection polynomials from zeroth degree to the highest degree of the LDGmethod.As an example,a third-order LDGmethod with associated same orderMR-WENO limiter has been developed in this paper,which could maintain the original order of accuracy in smooth regions and could simultaneously suppress spurious oscillations near strong shocks or contact discontinuities.The linear weights of such new MR-WENO limiter can be any positive numbers on condition that their summation is one.This is the first time that a series of different degree polynomials within the troubled cell are applied in a WENO-type fashion to modify the freedom of degrees of the LDG solutions in the troubled cell.This MR-WENO limiter is very simple to construct,and can be easily implemented to arbitrary high-order accuracy and in higher dimensions on unstructured meshes.Such spatial reconstruction methodology improves the robustness in the numerical simulation on the same compact spatial stencil of the original LDG methods on triangular meshes.Some classical viscous examples are given to show the good performance of this third-order LDG method with associated MR-WENO limiter.展开更多
In this work,we study the coercivity of a family of quadratic finite volume element(FVE)schemes over triangular meshes for solving elliptic boundary value problems.The analysis is based on the standard mapping from th...In this work,we study the coercivity of a family of quadratic finite volume element(FVE)schemes over triangular meshes for solving elliptic boundary value problems.The analysis is based on the standard mapping from the trial function space to the test function space so that the coercivity result can be naturally incorporated with most existing theoretical results such as H^(1) and L^(2) error estimates.The novelty of this paper is that,each element stiffness matrix of the quadratic FVE schemes can be decomposed into three parts:the first part is the element stiffness matrix of the standard quadratic finite element method(FEM),the second part is the difference between the FVE and FEM on the element boundary,while the third part can be expressed as the tensor product of two vectors.As a result,we reach a sufficient condition to guarantee the existence,uniqueness and coercivity result of the FVE solution on general triangular meshes.Moreover,based on this sufficient condition,some minimum angle conditions with simple,analytic and computable expressions are obtained.By comparison,the existing minimum angle conditions were obtained numerically from a computer program.Theoretical findings are conformed with the numerical results.展开更多
The Cubic-Polynomial Interpolation scheme has been developed and applied to many practical simulations.However,it seems the existing Cubic-Polynomial Interpolation scheme are restricted to uniform rectangular meshes.C...The Cubic-Polynomial Interpolation scheme has been developed and applied to many practical simulations.However,it seems the existing Cubic-Polynomial Interpolation scheme are restricted to uniform rectangular meshes.Consequently,this scheme has some limitations to problems in irregular domains.This paper will extend the Cubic-Polynomial Interpolation scheme to triangular meshes by using some spline interpolation techniques.Numerical examples are provided to demonstrate the accuracy of the proposed schemes.展开更多
基金supported by the NSFC Grant No.11872210 and Grant No.MCMS-I-0120G01Chi-Wang Shu:Research is supported by the AFOSR Grant FA9550-20-1-0055 and the NSF Grant DMS-2010107Jianxian Qiu:Research is supported by the NSFC Grant No.12071392.
文摘In this paper, we design high-order Runge-Kutta discontinuous Galerkin (RKDG) methods with multi-resolution weighted essentially non-oscillatory (multi-resolution WENO) limiters to compute compressible steady-state problems on triangular meshes. A troubled cell indicator extended from structured meshes to unstructured meshes is constructed to identify triangular cells in which the application of the limiting procedures is required. In such troubled cells, the multi-resolution WENO limiting methods are used to the hierarchical L^(2) projection polynomial sequence of the DG solution. Through using the RKDG methods with multi-resolution WENO limiters, the optimal high-order accuracy can be gradually reduced to first-order in the triangular troubled cells, so that the shock wave oscillations can be well suppressed. In steady-state simulations on triangular meshes, the numerical residual converges to near machine zero. The proposed spatial reconstruction methods enhance the robustness of classical DG methods on triangular meshes. The good results of these RKDG methods with multi-resolution WENO limiters are verified by a series of two-dimensional steady-state problems.
文摘A novel VOF-type volume-tracking method for two-dimensional free-surface flows based on the unstructured triangular mesh is presented. Owing to the inherent merit of the unstructured triangular mesh in fitting curved boundaries, this method can handle the free-surface problems with complex geometries accurately and directly, without introducing any complicated boundary treatment or artificial diffusion. The method solves the volume transport equation geometrically through the Modified Lagrangian-Eulerian Re-map （MLER） method, which is applied to advective fluid volumes. Moreover, the PLIC method is adopted to give a second-order reconstructed interface approximation. To validate this method, two advection tests were performed for the establishment of the accuracy and convergence rate of the solutions. Numerical results for these complex tests provide convincing evidence for the excellent solution quality and fidelity of the method.
基金Project supported by the National Natural Science Foundation of China (No. 10371110) and the National Basic Research Program (973)of China (No. 2004CB318000)
文摘Curvatures are important geometric attributes of surfaces. There are many applications that require as a first step the accurate estimation of curvatures at arbitrary vertices on a triangulated surface. Chen and Schmitt (1992) and Taubin (1995) presented two simple methods to estimate principal curvatures. They used circular arcs to approximate the normal curvature. We find this may cause large error in some cases. In this paper, we describe a more accurate method to estimate the normal curvature, and present a novel algorithm to estimate principal curvatures by simplifying the Chen and Schmitt’s method. Some comparison results are also shown in this paper.
基金Supported by the Natural Science Foundation of China （No. 40771169 No.40471108 No.40701152）.
文摘The characteristic of Quaternary codes is analyzed. The rule of distinguishing triangle direction is given out. An algorithm of neighbor finding by decomposing the Quaternary code from back to front is presented in this paper. The contrastive analysis of time complexity between this algorithm and Bartholdi＇s algorithm is approached. The result illustrates that the average consumed time of this algorithm is about 23.66% of Bartholdi＇s algorithm.
文摘In some scattered point cloud triangular mesh restoration algorithm, small triangular mesh holes problem will often affect the quality of the model. For small holes at the details, this paper propose a method for identifying and extracting hollow edge,and use a triangle growth way based on boundary edge angle to fill the empty void. First, according the relationship of the point, side and face of the triangle mesh model to identify the hole, then extracting the holes boundary edge and classifying it. Finally, using a triangle growth method based on holes boundary edge angle to fill each small holes separated from the boundary. Compared with other algorithm of filling holes, this method is high efficiency for small holes of smooth surface,and itimprovesthe quality of the triangular mesh model.
文摘A new method as a post-processing step is presented to improve the shape quality of triangular meshes, which uses a topological clean up procedure and discrete smoothing interpolate (DSI) algorithm together. This method can improve the angle distribution of mesh element. while keeping the resulting meshes conform to the predefined constraints which are inputted as a PSLG.
基金supported by the National Natural Science Foundation of China (60472083 60872141)
文摘The view prediction is an important step in stereo/multiview video coding, wherein, disparity estil mation （DE） is a key and difficult operation. DE algorithms usually require enormous computing power. A fast DE algorithm based on Delaunay triangulation （DT） is proposed. First, a flexible and content adaptive DT mesh is established on a target frame by an iterative split-merge algorithm. Second, DE on DT nodes are performed in a three-stage algorithm, which gives the majority of nodes a good estimate of the disparity vectors （DV）, by removing unreliable nodes due to occlusion, and forcing the minority of ＇problematic nodes＇ to be searched again, within their umbrella-shaped polygon, to the best. Finally, the target view is predicted by using affine transformation. Experimental results show that the proposed algorithm can give a satisfactory DE with less computational cost.
基金Project(60772089) supported by the National Natural Science Foundation of ChinaProject(20080440939) supported by the China Postdoctoral Science Foundation
文摘In the process of numerical control machining simulation,the workpiece surface is usually described with the uniform triangular mesh model.To alleviate the contradiction between the simulation speed and accuracy in this model,two improved methods,i.e.,the local refinement triangular mesh modeling method and the adaptive triangular mesh modeling method were presented.The simulation results show that when the final shape of the workpiece is known and its mathematic representation is simple,the local refinement triangular mesh modeling method is preferred;when the final shape of the workpiece is unknown and its mathematic description is complicated,the adaptive triangular mesh modeling method is more suitable.The experimental results show that both methods are more targeted and practical and can meet the requirements of real-time and precision in simulation.
文摘A new algorithm called the weighted least square discrete parameterization (WLSDP) is presented for the parameterization of triangular meshes over a convex planar region. This algorithm is the linear combination of the discrete Conformal mapping(DCM) and the discrete Authalic mapping(DAM). It provides the good properties of both DCM and DAM, such as robustness and low distortion. By adjusting the scaling factor q embedded in the WLSDP, satisfactory parameterizations in different special applications can be achieved.
文摘A stabilizer-free weak Galerkin(SFWG)finite element method was introduced and analyzed in Ye and Zhang(SIAM J.Numer.Anal.58:2572–2588,2020)for the biharmonic equation,which has an ultra simple finite element formulation.This work is a continuation of our investigation of the SFWG method for the biharmonic equation.The new SFWG method is highly accurate with a convergence rate of four orders higher than the optimal order of convergence in both the energy norm and the L^(2)norm on triangular grids.This new method also keeps the formulation that is symmetric,positive definite,and stabilizer-free.Four-order superconvergence error estimates are proved for the corresponding SFWG finite element solutions in a discrete H^(2)norm.Superconvergence of four orders in the L^(2)norm is also derived for k≥3,where k is the degree of the approximation polynomial.The postprocessing is proved to lift a P_(k)SFWG solution to a P_(k+4)solution elementwise which converges at the optimal order.Numerical examples are tested to verify the theor ies.
文摘In tidal areas, natural land boundary is complex and underwater topographyvaries acutely due to influence of upstream runoff and outer tide. The simulation and forecast ofwater current and mass transport play an important role in practical engineering. According to thesituation of irregular natural boundaries in tidal region, unsturctured triangular grid arrangementis applied to suit for complex conditions. A finite difference method with alternating directionalimplicit scheme for triangular grid is established in this paper. The model has been applied incalculation of flow and concentration fields for Nantong reach of the Yangtze River. It is satisfiedthat the calculated values are in agreement with observed data.
基金supported by the National Natural Science Foundation of China (No. 60773179)the National Basic Research Program (973) of China (No. 2004CB318000)
文摘We present a novel algorithm for adaptive triangular mesh coarsening. The algorithm has two stages. First, the input triangular mesh is refined by iteratively applying the adaptive subdivision operator that performs a so-called red-green split. Second, the refined mesh is simplified by a clustering algorithm based on centroidal Voronoi tessellations (CVTs). The accuracy and good quality of the output triangular mesh are achieved by combining adaptive subdivision and the CVTs technique. Test results showed the mesh coarsening scheme to be robust and effective. Examples are shown that validate the method.
基金Project supported by the National Natural Science Foundation of China (Nos. 60673006 and 60533060)the Program for New Century Excellent Talents in University (No. NCET-05-0275), Chinathe IDeA Network of Biomedical Research Excellence Grant (No. 5P20RR01647206) from National Institutes of Health (NIH), USA
文摘We present an efficient spherical parameterization approach aimed at simultaneously reducing area and angle dis-tortions. We generate the final spherical mapping by independently establishing two hemisphere parameterizations. The essence of the approach is to reduce spherical parameterization to a planar problem using symmetry analysis of 3D meshes. Experiments and comparisons were undertaken with various non-trivial 3D models, which revealed that our approach is efficient and robust. In particular, our method produces almost isometric parameterizations for the objects close to the sphere.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.11501570,91530106 and 11571366)Research Fund of NUDT(Grant Nos.JC15-02-02,ZK16-03-53),and the fund from HPCL.
文摘We modify the construction of the third order finite volume WENO scheme on triangular meshes and present a simplified WENO(SWENO)scheme.The novelty of the SWENO scheme is the less complexity and lower computational cost when deciding the smoothest stencil through a simple mechanism.The LU decomposition with iterative refinement is adopted to implement ill-conditioned interpolation matrices and improves the stability of the SWENOscheme efficiently.Besides,a scaling technique is used to circument the growth of condition numbers as mesh refined.However,weak oscillations still appear when the SWENO scheme deals with complex low density equations.In order to guarantee the maximum-principle-preserving(MPP)property,we apply a scaling limiter to the reconstruction polynomial without the loss of accuracy.A novel procedure is designed to prove this property theoretically.Finally,numerical examples for one-and two-dimensional problems are presented to verify the good performance,maximum principle preserving,essentially non-oscillation and high resolution of the proposed scheme.
文摘In this paper,a new multi-resolution weighted essentially non-oscillatory(MR-WENO)limiter for high-order local discontinuous Galerkin(LDG)method is designed for solving Navier-Stokes equations on triangular meshes.This MR-WENO limiter is a new extension of the finite volume MR-WENO schemes.Such new limiter uses information of the LDG solution essentially only within the troubled cell itself,to build a sequence of hierarchical L^(2)projection polynomials from zeroth degree to the highest degree of the LDGmethod.As an example,a third-order LDGmethod with associated same orderMR-WENO limiter has been developed in this paper,which could maintain the original order of accuracy in smooth regions and could simultaneously suppress spurious oscillations near strong shocks or contact discontinuities.The linear weights of such new MR-WENO limiter can be any positive numbers on condition that their summation is one.This is the first time that a series of different degree polynomials within the troubled cell are applied in a WENO-type fashion to modify the freedom of degrees of the LDG solutions in the troubled cell.This MR-WENO limiter is very simple to construct,and can be easily implemented to arbitrary high-order accuracy and in higher dimensions on unstructured meshes.Such spatial reconstruction methodology improves the robustness in the numerical simulation on the same compact spatial stencil of the original LDG methods on triangular meshes.Some classical viscous examples are given to show the good performance of this third-order LDG method with associated MR-WENO limiter.
基金supported by the Guangdong Basic and Applied Basic Research Foundation,China(No.2022A1515012106)the project of Guangdong Polytechnic Normal University,China(No.2022SDKYA023)the project of promoting research capabilities for key constructed disciplines in Guangdong Province,China(No.2021ZDJS028).
文摘In this work,we study the coercivity of a family of quadratic finite volume element(FVE)schemes over triangular meshes for solving elliptic boundary value problems.The analysis is based on the standard mapping from the trial function space to the test function space so that the coercivity result can be naturally incorporated with most existing theoretical results such as H^(1) and L^(2) error estimates.The novelty of this paper is that,each element stiffness matrix of the quadratic FVE schemes can be decomposed into three parts:the first part is the element stiffness matrix of the standard quadratic finite element method(FEM),the second part is the difference between the FVE and FEM on the element boundary,while the third part can be expressed as the tensor product of two vectors.As a result,we reach a sufficient condition to guarantee the existence,uniqueness and coercivity result of the FVE solution on general triangular meshes.Moreover,based on this sufficient condition,some minimum angle conditions with simple,analytic and computable expressions are obtained.By comparison,the existing minimum angle conditions were obtained numerically from a computer program.Theoretical findings are conformed with the numerical results.
基金The author supported by the National Natural Science Key Foundation of China No.10931004 and ISTCP of China grant No.2010DFR00700。
文摘The Cubic-Polynomial Interpolation scheme has been developed and applied to many practical simulations.However,it seems the existing Cubic-Polynomial Interpolation scheme are restricted to uniform rectangular meshes.Consequently,this scheme has some limitations to problems in irregular domains.This paper will extend the Cubic-Polynomial Interpolation scheme to triangular meshes by using some spline interpolation techniques.Numerical examples are provided to demonstrate the accuracy of the proposed schemes.
