Flexible electronic devices are often subjected to large and repeated deformation,so that their functional components such as metal interconnects need to sustain strains up to tens of percent,which is far beyond the i...Flexible electronic devices are often subjected to large and repeated deformation,so that their functional components such as metal interconnects need to sustain strains up to tens of percent,which is far beyond the intrinsic deformability of metal materials(~1%).To meet the stringent requirements of flexible electronics,metal/elastomer bilayers,a stretchable structure that consists of a metal film adhered to a stretchable elastomer substrate,have been developed to improve the stretch capability of metal interconnects.Previous studies have predicted that the metal/elastomer bilayers are much more stretchable than freestanding metal films.However,these investigations usually assume perfect bonding between the metal and elastomer layers.In this work,the effect of the metal/elastomer interface with a finite interfacial stiffness on the stretchability of bilayer structures is analyzed.The results show that the assumption of perfect interface(with infinite interfacial stiffness)may lead to an overestimation of the stretchability of bilayer structures.It is also demonstrated that increased adhesion between the metal and elastomer layers can enhance the stretchability of the metal layer.展开更多
The dimensional properties and uniarial stretchability of cotton interlock and interlock with missing needle are discussed on the basis of definition system for double knits. K values used widely to describe the dimen...The dimensional properties and uniarial stretchability of cotton interlock and interlock with missing needle are discussed on the basis of definition system for double knits. K values used widely to describe the dimensional properties of plain knitted structures are developed into the study of double knitted structures in this paper. K values are not constants, the numerical values of which will depend on the actual configuration of various knitted structures. It is suggested that the effect of knitted structures on dimensional properties and stretchability can be described by K values.展开更多
The development of strain sensors with high stretchability and stability is an inevitable requirement for achieving full-range and long-term use of wearable electronic devices.Herein,a resistive micromesh reinforced s...The development of strain sensors with high stretchability and stability is an inevitable requirement for achieving full-range and long-term use of wearable electronic devices.Herein,a resistive micromesh reinforced strain sensor(MRSS)with high stretchability and stability is prepared,consisting of a laser-scribed graphene(LSG)layer and two styrene-block-poly(ethylene-ran-butylene)-block-poly-styrene micromesh layers embedded in Ecoflex.The micromesh reinforced structure endows the MRSS with combined characteris-tics of a high stretchability(120%),excellent stability(with a repetition error of 0.8%after 11000 cycles),and outstanding sensitivity(gauge factor up to 2692 beyond 100%).Impressively,the MRSS can still be used continauously within the working range without damage,even if stretched to 300%.Furthermore,compared with different structure sensors,the mechanism of the MRSS with high stretchability and stability is elucidated.What's more,a multilayer finite element model,based on the layered structure of the LSG and the morphology of the cracks,is proposed to investigate the strain sensing behavior and failure mechanism of the MRSS.Finally,due to the outstanding performance,the MRSS not only performes well in monitoring full-range human motions,but also achieves intelligent recognitions of various respiratory activities and ges-tures assisted by neural network algorithms(the accuracy up to 94.29%and 100%,respectively).This work provides a new approach for designing high-performance resistive strain sensors and shows great potential in full-range and long-term intelligent health management and human-machine interac-tions applications.展开更多
Stretchable electronics that monitor joint activity and treat diseases based on liquid metal could be used in the development of healthcare applications.Such devices can be seamlessly integrated with human skin.Howeve...Stretchable electronics that monitor joint activity and treat diseases based on liquid metal could be used in the development of healthcare applications.Such devices can be seamlessly integrated with human skin.However,most high-precision microstructures and complex patterns are difficult to fabricate due to the limitations of conventional fabrication solutions,resulting in suboptimal performance under practical conditions.Here,a liquid-metal stretchable system utilizing natural leaf veins was reported as microstructures,which was based on a biomimetic concept and utilized an all-solution process for the preparation of complex microstructures.The systems are ultra-high tensile(800%tensile strain),environmentally stable(20 days)and mechanically durable(300-cycle).The system can accurately recognize the wearer's finger bending level as well as simple gesture signals.At the same time,the system acts as a wearable heater,which can realize the fast heating behavior of heating up to 50℃in 3 min under the human body-safe voltage(1.5 V).The tensile stability is demonstrated by the heterogeneous integration of lasers(405 nm)with the system interconnects for a stretchable and wearable light source.展开更多
With the emergence of Y-series small molecule acceptors,polymerizing the small molecule acceptors with aromatic linker units has attracted significant research attention,which has greatly advanced the photovoltaic per...With the emergence of Y-series small molecule acceptors,polymerizing the small molecule acceptors with aromatic linker units has attracted significant research attention,which has greatly advanced the photovoltaic performance of all-polymer solar cells.Despite the rapid increase in efficiency,the unique characteristics(e.g.,mechanical stretchability and flexibility)of all-polymer systems were still not thoroughly explored.In this work,we demonstrate an effective approach to simultaneously improve device performance,stability,and mechanical robustness of all-polymer solar cells by properly suppressing the aggregation and crystallization behaviors of polymerized Y-series acceptors.Strikingly,when introducing 50 wt%PYF-IT(a fluorinated version of PY-IT)into the well-known PM6:PY-IT system,the all-polymer devices delivered an impressive photovoltaic efficiency of 16.6%,significantly higher than that of the control binary cell(15.0%).Compared with the two binary systems,the optimal ternary blend exhibits more efficient charge separation and balanced charge transport accompanying with less recombination.Moreover,a high-performance 1.0 cm^(2)large-area device of 15%efficiency was demonstrated for the optimized ternary all-polymer blend,which offered a desirable PCE of 14.5%on flexible substrates and improved mechanical flexibility after bending 1000 cycles.Notably,these are among the best results for 1.0 cm^(2)all-polymer OPVs thus far.This work also heralds a bright future of all-polymer systems for flexible wearable energy-harvesting applications.展开更多
With the rapid development of flexible wearable electronics,the demand for stretchable energy storage devices has surged.In this work,a novel gradient-layered architecture was design based on single-pore hollow lignin...With the rapid development of flexible wearable electronics,the demand for stretchable energy storage devices has surged.In this work,a novel gradient-layered architecture was design based on single-pore hollow lignin nanospheres(HLNPs)-intercalated two-dimensional transition metal carbide(Ti_(3)C_(2)T_(x) MXene)for fabricating highly stretchable and durable supercapacitors.By depositing and inserting HLNPs in the MXene layers with a bottom-up decreasing gradient,a multilayered porous MXene structure with smooth ion channels was constructed by reducing the overstacking of MXene lamella.Moreover,the micro-chamber architecture of thin-walled lignin nanospheres effectively extended the contact area between lignin and MXene to improve ion and electron accessibility,thus better utilizing the pseudocapacitive property of lignin.All these strategies effectively enhanced the capacitive performance of the electrodes.In addition,HLNPs,which acted as a protective phase for MXene layer,enhanced mechanical properties of the wrinkled stretchable electrodes by releasing stress through slip and deformation during the stretch-release cycling and greatly improved the structural integrity and capacitive stability of the electrodes.Flexible electrodes and symmetric flexible all-solid-state supercapacitors capable of enduring 600%uniaxial tensile strain were developed with high specific capacitances of 1273 mF cm^(−2)(241 F g^(−1))and 514 mF cm^(−2)(95 F g^(−1)),respectively.Moreover,their capacitances were well preserved after 1000 times of 600%stretch-release cycling.This study showcased new possibilities of incorporating biobased lignin nanospheres in energy storage devices to fabricate stretchable devices leveraging synergies among various two-dimensional nanomaterials.展开更多
The soft nature has endowed conjugated polymers with promising applications in a wide range of field-effect transistor(FET)based flexible electronics.With unremitting efforts on revealing the molecular structure-prope...The soft nature has endowed conjugated polymers with promising applications in a wide range of field-effect transistor(FET)based flexible electronics.With unremitting efforts on revealing the molecular structure-property relationships,numerous novel conjugated polymers with high mobility and excellent mechanical property have been developed in the past decades.Incorporating hydrogen-bonding(H-bonding)units into semiconducting polymers is one of the most successful strategies for designing high-performance semiconducting materials.In this review,we aim to highlight the roles of H-bonding units in the performances of polymeric FETs from three aspects.These include(i)charge mobility enhancement for semiconducting polymers after incorporation of H-bonding units into the side chains,(ii)the effects of H-bonding units on the stretchability of conjugated polymers,and(iii)the improvement of self-healing properties of conjugated polymers containing dynamic hydrogen bonds due to the H-bonding units in the side chains or conjugated backbones.展开更多
Stretchable electronics are crucial enablers for next-generation wearables intimately integrated into the human body.As the primary compliant conductors used in these devices,metallic nanostructure/elastomer composite...Stretchable electronics are crucial enablers for next-generation wearables intimately integrated into the human body.As the primary compliant conductors used in these devices,metallic nanostructure/elastomer composites often struggle to form conformal contact with the textured skin.Hybrid electrodes have been consequently developed based on conductive nanocomposite and soft hydrogels to establish seamless skin-device interfaces.However,chemical modifications are typically needed for reliable bonding,which can alter their original properties.To overcome this limitation,this study presents a facile fabrication approach for mechanically interlocked nanocomposite/hydrogel hybrid electrodes.In this physical process,soft microfoams are thermally laminated on silver nanowire nanocomposites as a porous interface,which forms an interpenetrating network with the hydrogel.The microfoam-enabled bonding strategy is generally compatible with various polymers.The resulting interlocked hybrids have a 28-fold improved interfacial toughness compared to directly stacked hybrids.These electrodes achieve firm attachment to the skin and low contact impedance using tissue-adhesive hydrogels.They have been successfully integrated into an epidermal sleeve to distinguish hand gestures by sensing mus-cle contractions.Interlocked nanocomposite/hydrogel hybrids reported here offer a promising platform to combine the benefits of both materials for epidermal devices and systems.展开更多
Despite the growing demand for transparent conductive films in smart and wearable electronics for electromagnetic interference(EMI)shielding,achieving a flexible EMI shielding film,while maintaining a high transmittan...Despite the growing demand for transparent conductive films in smart and wearable electronics for electromagnetic interference(EMI)shielding,achieving a flexible EMI shielding film,while maintaining a high transmittance remains a significant challenge.Herein,a flexible,transparent,and conductive copper(Cu)metal mesh film for EMI shielding is fabricated by self-forming crackle template method and electroplating technique.The Cu mesh film shows an ultra-low sheet resistance(0.18Ω□^(-1)),high transmittance(85.8%@550 nm),and ultra-high figure of merit(>13,000).It also has satisfactory stretchability and mechanical stability,with a resistance increases of only 1.3%after 1,000 bending cycles.As a stretchable heater(ε>30%),the saturation temperature of the film can reach over 110°C within 60 s at 1.00 V applied voltage.Moreover,the metal mesh film exhibits outstanding average EMI shielding effectiveness of 40.4 dB in the X-band at the thickness of 2.5μm.As a demonstration,it is used as a transparent window for shielding the wireless communication electromagnetic waves.Therefore,the flexible and transparent conductive Cu mesh film proposed in this work provides a promising candidate for the next-generation EMI shielding applications.展开更多
Wearable bioelectronic devices have the capacity for real-time human health monitoring,the provision of tailored services,and natural interaction with smart devices.However,these wearable bioelectronic devices rely on...Wearable bioelectronic devices have the capacity for real-time human health monitoring,the provision of tailored services,and natural interaction with smart devices.However,these wearable bioelectronic devices rely on conventional rigid batteries that are frequently charged or replaced and are incompatible with the skin,leading to a discontinuity in complex therapeutic tasks related to human health monitoring and human-machine interaction.Stretchable triboelectric nanogenerator(TENG)is a high-efficiency energy harvesting technology that converts mechanical into electrical energy,effectively powering wearable bioelectronic devices.This study comprehensively overviews recent advances in stretchable TENG for use in wearable bioelectronic devices.The working mechanism of stretchable TENG is initially explained.A comprehensive discussion presents the approaches for fabricating stretchable TENG,including the design of stretchable structures and the selection of stretchable materials.Furthermore,applications of wearable bioelectronic devices based on stretchable TENG in human health monitoring(body movements,pulse,and respiration)and human-machine interaction(touch panels,machine control,and virtual reality)are introduced.Ultimately,the challenges and developmental trends regarding wearable bioelectronic devices based on stretchable TENG are elaborated.展开更多
The demand of high-performance thin-film-shaped deformable electromagnetic interference(EMI)shielding devices is increasing for the next generation of wearable and miniaturized soft electronics.Although highly reflect...The demand of high-performance thin-film-shaped deformable electromagnetic interference(EMI)shielding devices is increasing for the next generation of wearable and miniaturized soft electronics.Although highly reflective conductive materials can effectively shield EMI,they prevent deformation of the devices owing to rigidity and generate secondary electromagnetic pollution simultaneously.Herein,soft and stretchable EMI shielding thin film devices with absorption-dominant EMI shielding behavior is presented.The devices consist of liquid metal(LM)layer and LM grid-patterned layer separated by a thin elastomeric film,fabricated by leveraging superior adhesion of aerosol-deposited LM on elastomer.The devices demonstrate high electromagnetic shielding effectiveness(SE)(SE_(T) of up to 75 dB)with low reflectance(SER of 1.5 dB at the resonant frequency)owing to EMI absorption induced by multiple internal reflection generated in the LM grid architectures.Remarkably,the excellent stretchability of the LM-based devices facilitates tunable EMI shielding abilities through grid space adjustment upon strain(resonant frequency shift from 81.3 to 71.3 GHz@33%strain)and is also capable of retaining shielding effectiveness even after multiple strain cycles.This newly explored device presents an advanced paradigm for powerful EMI shielding performance for next-generation smart electronics.展开更多
Nowadays,the increasing electromagnetic waves generated by wearable devices are becoming an emerging issue for human health,so stretchable electromagnetic interference(EMI)shielding materials are highly demanded.Eleph...Nowadays,the increasing electromagnetic waves generated by wearable devices are becoming an emerging issue for human health,so stretchable electromagnetic interference(EMI)shielding materials are highly demanded.Elephant trunks are capable of grabbing fragile vegetation and tearing trees thanks not only to their muscles but also to their folded skins.Inspired by the wrinkled skin of the elephant trunks,herein,we propose a winkled conductive film based on single-walled carbon nanotubes(SWCNTs)for multifunctional EMI applications.The conductive film has a sandwich structure,which was prepared by coating SWCNTs on both sides of the stretched elastic latex cylindrical substrate.The shrinking-induced winkled conductive network could withstand up to 200%tensile strain.Typically,when the stretching direction is parallel to the polarization direction of the electric field,the total EMI shielding effectiveness could surprisingly increase from 38.4 to 52.7 dB at 200%tensile strain.It is mainly contributed by the increased connection of the SWCNTs.In addition,the film also has good Joule heating performance at several voltages,capable of releasing pains in injured joints.This unique property makes it possible for strain-adjustable multifunctional EMI shielding and wearable thermotherapy applications.展开更多
The rapid development of stretchable electronics made by circuits,microchips,and encapsulation elastomers has caused the production of a large amount of electronic waste(e-waste).The degradation of elastomers can high...The rapid development of stretchable electronics made by circuits,microchips,and encapsulation elastomers has caused the production of a large amount of electronic waste(e-waste).The degradation of elastomers can highly minimize the negative effects of e-wastes.However,chemicals that included acid,alkali,and organics were repeatedly used during the recycling process,which were environmentally unfriendly.Here,a water-modulation-degradation-reconstruction(WDR)polyvinylpyrrolidone(PVP)-honey composite(PHC)polymer-gel was developed and could be regarded as encapsulation elastomers to realize a fully recyclable water-degradable stretchable(WS)electronics with multi-functions.The stretchability of the PHC polymer-gel could be modulated by the change of its water retention.The Chip-integrated liquid metal(LM)circuits encapsulated with the modulated PHC encapsulation elastomer could withstand a strain value of~3000%.Moreover,we developed a WS biomedical sensor composed of PHC encapsulation elastomer,LM circuits,and microchips,which could be fully recycled by biodegrading it in water to reconstruct a new one.As before,the reconstructed WS biomedical sensor could still simultaneously realize the combination of ultra-stretchability,recycling,self-healing,self-adhesive,and self-conformal abilities.The results revealed that this study exercises a profound influence on the rational design of multi-functional WS electronics.展开更多
Post-earthquake rescue missions are full of challenges due to the unstable structure of ruins and successive aftershocks.Most of the current rescue robots lack the ability to interact with environments,leading to low ...Post-earthquake rescue missions are full of challenges due to the unstable structure of ruins and successive aftershocks.Most of the current rescue robots lack the ability to interact with environments,leading to low rescue efficiency.The multimodal electronic skin(e-skin)proposed not only reproduces the pressure,temperature,and humidity sensing capabilities of natural skin but also develops sensing functions beyond it—perceiving object proximity and NO2 gas.Its multilayer stacked structure based on Ecoflex and organohydrogel endows the e-skin with mechanical properties similar to natural skin.Rescue robots integrated with multimodal e-skin and artificial intelligence(AI)algorithms show strong environmental perception capabilities and can accurately distinguish objects and identify human limbs through grasping,laying the foundation for automated post-earthquake rescue.Besides,the combination of e-skin and NO2 wireless alarm circuits allows robots to sense toxic gases in the environment in real time,thereby adopting appropriate measures to protect trapped people from the toxic environment.Multimodal e-skin powered by AI algorithms and hardware circuits exhibits powerful environmental perception and information processing capabilities,which,as an interface for interaction with the physical world,dramatically expands intelligent robots’application scenarios.展开更多
Flexible multidirectional strain sensors are crucial to accurately determining the complex strain states involved in emerging sensing applications.Although considerable efforts have been made to construct anisotropic ...Flexible multidirectional strain sensors are crucial to accurately determining the complex strain states involved in emerging sensing applications.Although considerable efforts have been made to construct anisotropic structures for improved selective sensing capabilities,existing anisotropic sensors suffer from a trade-off between high sensitivity and high stretchability with acceptable linearity.Here,an ultrasensitive,highly selective multidirectional sensor is developed by rational design of functionally different anisotropic layers.The bilayer sensor consists of an aligned carbon nanotube(CNT)array assembled on top of a periodically wrinkled and cracked CNT-graphene oxide film.The transversely aligned CNT layer bridge the underlying longitudinal microcracks to effectively discourage their propagation even when highly stretched,leading to superior sensitivity with a gauge factor of 287.6 across a broad linear working range of up to 100%strain.The wrinkles generated through a pre-straining/releasing routine in the direction transverse to CNT alignment is responsible for exceptional selectivity of 6.3,to the benefit of accurate detection of loading directions by the multidirectional sensor.This work proposes a unique approach to leveraging the inherent merits of two cross-influential anisotropic structures to resolve the trade-off among sensitivity,selectivity,and stretchability,demonstrating promising applications in full-range,multi-axis human motion detection for wearable electronics and smart robotics.展开更多
All-polymer solar cells(all-PSCs)possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing.Introducing flexible conjugation-break spacers(FCBSs)in...All-polymer solar cells(all-PSCs)possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing.Introducing flexible conjugation-break spacers(FCBSs)into backbones of polymer donor(P_(D))or polymer acceptor(P_(A))has been demonstrated as an efficient approach to enhance both the photovoltaic(PV)and mechanical properties of the all-PSCs.However,length dependency of FCBS on certain all-PSC related properties has not been systematically explored.In this regard,we report a series of new non-conjugated P_(A)s by incorporating FCBS with various lengths(2,4,and 8 carbon atoms in thioalkyl segments).Unlike com-mon studies on so-called side-chain engineering,where longer side chains would lead to better solubility of those resulting polymers,in this work,we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length(i.e.,C2)in P_(A) named PYTS-C2.Its all-PSC achieves a high efficiency of 11.37%,and excellent mechanical robustness with a crack onset strain of 12.39%,significantly superior to those of the other P_(A)s.These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs,providing an effective strategy to fine-tune the structures of P_(A)s for highly efficient and mechanically robust PSCs.展开更多
Fractal-structured silver particles(FSSPs)are conductive materials with a micron-scale trunk and nanoscale branches,and are characterized with high electrical conductivity and high connectivity.In this study,FSSPs wer...Fractal-structured silver particles(FSSPs)are conductive materials with a micron-scale trunk and nanoscale branches,and are characterized with high electrical conductivity and high connectivity.In this study,FSSPs were added to an aqueous additive solution for synthesizing a conductive ink,which was used to prepare two types of printing electrodes via screen printing.The first type included two flexible printed electrodes(FPEs):an FPE on a polyethylene terephthalate(PET)film and an FPE on paper.The second one was a polydimethylsiloxane(PDMS)-embedded FPE.The PETbased FPE exhibited high electrochemical stability when its sheet resistance was 0.38Ω/sq for a 50%(w/w)content of FSSPs in the prepared conductive ink.Moreover,the embedded FPE demonstrated excellent mechanical properties and high chemical stability.In addition,the embedded structure was endowed with stretchability,which is important for different devices,such as flexible biomedical sensors and flexible electronics.展开更多
The performance of the flexibility and stretchability of flexible electronics depends on the mechanical structure design,for which a great progress has been made in past years.The use of prestrain in the substrate,cau...The performance of the flexibility and stretchability of flexible electronics depends on the mechanical structure design,for which a great progress has been made in past years.The use of prestrain in the substrate,causing the compression of the transferred interconnects,can provide high elastic stretchability.Recently,the nonbuckling interconnects have been designed,where thick bar replaces thin ribbon layout to yield scissor-like in-plane deformation instead of in-or out-of-plane buckling modes.The nonbuckling interconnect design achieves significantly enhanced stretchability.However,combined use of prestrain and nonbuckling interconnects has not been explored.This paper aims to study the mechanical behavior of nonbuckling interconnects bonded to the prestrained substrate analytically and numerically.It is found that larger prestrain,longer straight segment,and smaller arc radius yield smaller strain in the interconnects.On the other hand,larger prestrain can also cause larger strain in the interconnects after releasing the prestrain.Therefore,the optimization of the prestrain needs to be found to achieve favorable stretchability.展开更多
The development of flexible and stretchable electronics has attracted much attention.As an important part of wearable electronic systems,the connection between conductive yarns and electronic components affects the st...The development of flexible and stretchable electronics has attracted much attention.As an important part of wearable electronic systems,the connection between conductive yarns and electronic components affects the stability and accuracy of their electrical reliability.In this paper,three different connections were attempted to electrically and mechanically link two conductive yarns,including soldering followed by waterborne polyurethane(WPU)encapsulation,coating of conductive silver adhesive with WPU encapsulation,as well as coating of conductive silver adhesive with polydimethylsiloxane(PDMS)encapsulation.The surface morphologies and electro-mechanical behaviors of the three created connected conductive yarns were characterized.Compared with their electro-mechanical behaviors of the established three connections,the connection with soldering remained electrically conductive to around 200%,which mainly came from the stress concentration between the stiff soldering and soft conductive yarns.However,the coating of conductive silver adhesive and encapsulated protection of PDMS can make the connected conductive yarns stretchable up to 300%with almost constant electrical resistance.展开更多
In this work, we have presented a freestanding and flexible CNT-based film with sheet resistance of 60 ？/ and transmittance of 82% treated by nitric acid and chloroauric acid in sequence. Based on modified CNT film a...In this work, we have presented a freestanding and flexible CNT-based film with sheet resistance of 60 ？/ and transmittance of 82% treated by nitric acid and chloroauric acid in sequence. Based on modified CNT film as a transparent electrode, we have demonstrated an ultrathin, flexible organic solar cell（OSC） fabricated on 2.5-μm PET substrate. The efficiency of OSC, combined with a composite film of poly（3-hexylthiophene）（P3HT） and phenyl-C61 butyric acid methyl ester（PCBM） as an active layer and with a thin layer of methanol soluble biuret inserted between the photoactive layer and the cathode, can be up to 2.74% which is approximate to that of the reference solar cell fabricated with ITO-coated glass（2.93%）. Incorporating the as-fabricated ITO-free OSC with pre-stretched elastomer, 50% compressive deformation can apply to the solar cells. The results show that the as-prepared CNT-based hybrid film with outstanding electrical and optical properties could serve as a promising transparent electrode for low cost, flexible and stretchable OSCs, which will broaden the applications of OSC and generate more solar power than it now does.展开更多
文摘Flexible electronic devices are often subjected to large and repeated deformation,so that their functional components such as metal interconnects need to sustain strains up to tens of percent,which is far beyond the intrinsic deformability of metal materials(~1%).To meet the stringent requirements of flexible electronics,metal/elastomer bilayers,a stretchable structure that consists of a metal film adhered to a stretchable elastomer substrate,have been developed to improve the stretch capability of metal interconnects.Previous studies have predicted that the metal/elastomer bilayers are much more stretchable than freestanding metal films.However,these investigations usually assume perfect bonding between the metal and elastomer layers.In this work,the effect of the metal/elastomer interface with a finite interfacial stiffness on the stretchability of bilayer structures is analyzed.The results show that the assumption of perfect interface(with infinite interfacial stiffness)may lead to an overestimation of the stretchability of bilayer structures.It is also demonstrated that increased adhesion between the metal and elastomer layers can enhance the stretchability of the metal layer.
文摘The dimensional properties and uniarial stretchability of cotton interlock and interlock with missing needle are discussed on the basis of definition system for double knits. K values used widely to describe the dimensional properties of plain knitted structures are developed into the study of double knitted structures in this paper. K values are not constants, the numerical values of which will depend on the actual configuration of various knitted structures. It is suggested that the effect of knitted structures on dimensional properties and stretchability can be described by K values.
基金supported by National Natural Science Foundation of China(Nos.62201624,32000939,21775168,22174167,51861145202,U20A20168)Shenzhen Science and Technology Program(No.RCBS20221008093310024)+2 种基金Shenzhen Research Funding Program(No.JCYJ20190807160401657,JCYJ201908073000608)the Open Research Fund Program of Beijing National Research Center for Information Science and Technology(No.BR2023KF02010)support from Key Laboratory of Sensing Technology and Biomedical Instruments of Guangdong Province(No.2020B1212060077).
文摘The development of strain sensors with high stretchability and stability is an inevitable requirement for achieving full-range and long-term use of wearable electronic devices.Herein,a resistive micromesh reinforced strain sensor(MRSS)with high stretchability and stability is prepared,consisting of a laser-scribed graphene(LSG)layer and two styrene-block-poly(ethylene-ran-butylene)-block-poly-styrene micromesh layers embedded in Ecoflex.The micromesh reinforced structure endows the MRSS with combined characteris-tics of a high stretchability(120%),excellent stability(with a repetition error of 0.8%after 11000 cycles),and outstanding sensitivity(gauge factor up to 2692 beyond 100%).Impressively,the MRSS can still be used continauously within the working range without damage,even if stretched to 300%.Furthermore,compared with different structure sensors,the mechanism of the MRSS with high stretchability and stability is elucidated.What's more,a multilayer finite element model,based on the layered structure of the LSG and the morphology of the cracks,is proposed to investigate the strain sensing behavior and failure mechanism of the MRSS.Finally,due to the outstanding performance,the MRSS not only performes well in monitoring full-range human motions,but also achieves intelligent recognitions of various respiratory activities and ges-tures assisted by neural network algorithms(the accuracy up to 94.29%and 100%,respectively).This work provides a new approach for designing high-performance resistive strain sensors and shows great potential in full-range and long-term intelligent health management and human-machine interac-tions applications.
基金financially supported by the National Key Research and Development Program of China(No.2021YFA1401100)the National Natural Science Foundation of China(Nos.61825403 and 61921005)。
文摘Stretchable electronics that monitor joint activity and treat diseases based on liquid metal could be used in the development of healthcare applications.Such devices can be seamlessly integrated with human skin.However,most high-precision microstructures and complex patterns are difficult to fabricate due to the limitations of conventional fabrication solutions,resulting in suboptimal performance under practical conditions.Here,a liquid-metal stretchable system utilizing natural leaf veins was reported as microstructures,which was based on a biomimetic concept and utilized an all-solution process for the preparation of complex microstructures.The systems are ultra-high tensile(800%tensile strain),environmentally stable(20 days)and mechanically durable(300-cycle).The system can accurately recognize the wearer's finger bending level as well as simple gesture signals.At the same time,the system acts as a wearable heater,which can realize the fast heating behavior of heating up to 50℃in 3 min under the human body-safe voltage(1.5 V).The tensile stability is demonstrated by the heterogeneous integration of lasers(405 nm)with the system interconnects for a stretchable and wearable light source.
基金This research was made possible thanks to the financial support of the National Natural Science Foundation of China(Nos.52073207 and 52121002)the Fundamental Research Funds for the Central Universities.L.Ye also appreciates the Peiyang Scholar Program of Tianjin University for support。
文摘With the emergence of Y-series small molecule acceptors,polymerizing the small molecule acceptors with aromatic linker units has attracted significant research attention,which has greatly advanced the photovoltaic performance of all-polymer solar cells.Despite the rapid increase in efficiency,the unique characteristics(e.g.,mechanical stretchability and flexibility)of all-polymer systems were still not thoroughly explored.In this work,we demonstrate an effective approach to simultaneously improve device performance,stability,and mechanical robustness of all-polymer solar cells by properly suppressing the aggregation and crystallization behaviors of polymerized Y-series acceptors.Strikingly,when introducing 50 wt%PYF-IT(a fluorinated version of PY-IT)into the well-known PM6:PY-IT system,the all-polymer devices delivered an impressive photovoltaic efficiency of 16.6%,significantly higher than that of the control binary cell(15.0%).Compared with the two binary systems,the optimal ternary blend exhibits more efficient charge separation and balanced charge transport accompanying with less recombination.Moreover,a high-performance 1.0 cm^(2)large-area device of 15%efficiency was demonstrated for the optimized ternary all-polymer blend,which offered a desirable PCE of 14.5%on flexible substrates and improved mechanical flexibility after bending 1000 cycles.Notably,these are among the best results for 1.0 cm^(2)all-polymer OPVs thus far.This work also heralds a bright future of all-polymer systems for flexible wearable energy-harvesting applications.
基金supported by Natural Science and Engineering Research Council of Canada(RGPIN-2017-06737)Canada Research Chairs program,the National Key Research and Development Program of China(2017YFD0601005,2022YFD0904201)+1 种基金the National Natural Science Foundation of China(51203075)the China Scholarship Council(Grant No.CSC202208320361).
文摘With the rapid development of flexible wearable electronics,the demand for stretchable energy storage devices has surged.In this work,a novel gradient-layered architecture was design based on single-pore hollow lignin nanospheres(HLNPs)-intercalated two-dimensional transition metal carbide(Ti_(3)C_(2)T_(x) MXene)for fabricating highly stretchable and durable supercapacitors.By depositing and inserting HLNPs in the MXene layers with a bottom-up decreasing gradient,a multilayered porous MXene structure with smooth ion channels was constructed by reducing the overstacking of MXene lamella.Moreover,the micro-chamber architecture of thin-walled lignin nanospheres effectively extended the contact area between lignin and MXene to improve ion and electron accessibility,thus better utilizing the pseudocapacitive property of lignin.All these strategies effectively enhanced the capacitive performance of the electrodes.In addition,HLNPs,which acted as a protective phase for MXene layer,enhanced mechanical properties of the wrinkled stretchable electrodes by releasing stress through slip and deformation during the stretch-release cycling and greatly improved the structural integrity and capacitive stability of the electrodes.Flexible electrodes and symmetric flexible all-solid-state supercapacitors capable of enduring 600%uniaxial tensile strain were developed with high specific capacitances of 1273 mF cm^(−2)(241 F g^(−1))and 514 mF cm^(−2)(95 F g^(−1)),respectively.Moreover,their capacitances were well preserved after 1000 times of 600%stretch-release cycling.This study showcased new possibilities of incorporating biobased lignin nanospheres in energy storage devices to fabricate stretchable devices leveraging synergies among various two-dimensional nanomaterials.
基金supported by the National Key R&D Program of China(2018YFE0200700)NSFC(21790363,21871271,22090021,22075293,22021002,22071254).
文摘The soft nature has endowed conjugated polymers with promising applications in a wide range of field-effect transistor(FET)based flexible electronics.With unremitting efforts on revealing the molecular structure-property relationships,numerous novel conjugated polymers with high mobility and excellent mechanical property have been developed in the past decades.Incorporating hydrogen-bonding(H-bonding)units into semiconducting polymers is one of the most successful strategies for designing high-performance semiconducting materials.In this review,we aim to highlight the roles of H-bonding units in the performances of polymeric FETs from three aspects.These include(i)charge mobility enhancement for semiconducting polymers after incorporation of H-bonding units into the side chains,(ii)the effects of H-bonding units on the stretchability of conjugated polymers,and(iii)the improvement of self-healing properties of conjugated polymers containing dynamic hydrogen bonds due to the H-bonding units in the side chains or conjugated backbones.
基金We acknowledge the support from the National Key Research and Development Program of China(Grant No.2022YFA1405000)the Natural Science Foundation of Jiangsu Province,Major Project(Grant No.BK20212004)+1 种基金the National Natural Science Foundation of China(Grant No.62374083)the State Key Laboratory of Analytical Chemistry for Life Science(Grant No.5431ZZXM2205).
文摘Stretchable electronics are crucial enablers for next-generation wearables intimately integrated into the human body.As the primary compliant conductors used in these devices,metallic nanostructure/elastomer composites often struggle to form conformal contact with the textured skin.Hybrid electrodes have been consequently developed based on conductive nanocomposite and soft hydrogels to establish seamless skin-device interfaces.However,chemical modifications are typically needed for reliable bonding,which can alter their original properties.To overcome this limitation,this study presents a facile fabrication approach for mechanically interlocked nanocomposite/hydrogel hybrid electrodes.In this physical process,soft microfoams are thermally laminated on silver nanowire nanocomposites as a porous interface,which forms an interpenetrating network with the hydrogel.The microfoam-enabled bonding strategy is generally compatible with various polymers.The resulting interlocked hybrids have a 28-fold improved interfacial toughness compared to directly stacked hybrids.These electrodes achieve firm attachment to the skin and low contact impedance using tissue-adhesive hydrogels.They have been successfully integrated into an epidermal sleeve to distinguish hand gestures by sensing mus-cle contractions.Interlocked nanocomposite/hydrogel hybrids reported here offer a promising platform to combine the benefits of both materials for epidermal devices and systems.
基金This work was financially supported by the National Natural Science Foundation of China(Grant No.523712475,2072415 and 62101352)Shenzhen Science and Technology Program(RCBS20210706092343016).
文摘Despite the growing demand for transparent conductive films in smart and wearable electronics for electromagnetic interference(EMI)shielding,achieving a flexible EMI shielding film,while maintaining a high transmittance remains a significant challenge.Herein,a flexible,transparent,and conductive copper(Cu)metal mesh film for EMI shielding is fabricated by self-forming crackle template method and electroplating technique.The Cu mesh film shows an ultra-low sheet resistance(0.18Ω□^(-1)),high transmittance(85.8%@550 nm),and ultra-high figure of merit(>13,000).It also has satisfactory stretchability and mechanical stability,with a resistance increases of only 1.3%after 1,000 bending cycles.As a stretchable heater(ε>30%),the saturation temperature of the film can reach over 110°C within 60 s at 1.00 V applied voltage.Moreover,the metal mesh film exhibits outstanding average EMI shielding effectiveness of 40.4 dB in the X-band at the thickness of 2.5μm.As a demonstration,it is used as a transparent window for shielding the wireless communication electromagnetic waves.Therefore,the flexible and transparent conductive Cu mesh film proposed in this work provides a promising candidate for the next-generation EMI shielding applications.
基金supported by the National Natural Science Foundation of China(No.52203310)the China Postdoctoral Science Foundation(Nos.2023T160195 and 2023M730993)+1 种基金the Henan Province Science and Technology Research and Development Program Joint Fund Advantageous Discipline Cultivation Project(No.232301420033)the Henan Agricultural University Start-up Grant(No.30501054).
文摘Wearable bioelectronic devices have the capacity for real-time human health monitoring,the provision of tailored services,and natural interaction with smart devices.However,these wearable bioelectronic devices rely on conventional rigid batteries that are frequently charged or replaced and are incompatible with the skin,leading to a discontinuity in complex therapeutic tasks related to human health monitoring and human-machine interaction.Stretchable triboelectric nanogenerator(TENG)is a high-efficiency energy harvesting technology that converts mechanical into electrical energy,effectively powering wearable bioelectronic devices.This study comprehensively overviews recent advances in stretchable TENG for use in wearable bioelectronic devices.The working mechanism of stretchable TENG is initially explained.A comprehensive discussion presents the approaches for fabricating stretchable TENG,including the design of stretchable structures and the selection of stretchable materials.Furthermore,applications of wearable bioelectronic devices based on stretchable TENG in human health monitoring(body movements,pulse,and respiration)and human-machine interaction(touch panels,machine control,and virtual reality)are introduced.Ultimately,the challenges and developmental trends regarding wearable bioelectronic devices based on stretchable TENG are elaborated.
基金supported by National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(RS-2024-00335216,RS-2024-00407084 and RS-2023-00207836)Korea Environment Industry&Technology Institute(KEITI)through the R&D Project of Recycling Development for Future Waste Resources Program,funded by the Korea Ministry of Environment(MOE)(2022003500003).
文摘The demand of high-performance thin-film-shaped deformable electromagnetic interference(EMI)shielding devices is increasing for the next generation of wearable and miniaturized soft electronics.Although highly reflective conductive materials can effectively shield EMI,they prevent deformation of the devices owing to rigidity and generate secondary electromagnetic pollution simultaneously.Herein,soft and stretchable EMI shielding thin film devices with absorption-dominant EMI shielding behavior is presented.The devices consist of liquid metal(LM)layer and LM grid-patterned layer separated by a thin elastomeric film,fabricated by leveraging superior adhesion of aerosol-deposited LM on elastomer.The devices demonstrate high electromagnetic shielding effectiveness(SE)(SE_(T) of up to 75 dB)with low reflectance(SER of 1.5 dB at the resonant frequency)owing to EMI absorption induced by multiple internal reflection generated in the LM grid architectures.Remarkably,the excellent stretchability of the LM-based devices facilitates tunable EMI shielding abilities through grid space adjustment upon strain(resonant frequency shift from 81.3 to 71.3 GHz@33%strain)and is also capable of retaining shielding effectiveness even after multiple strain cycles.This newly explored device presents an advanced paradigm for powerful EMI shielding performance for next-generation smart electronics.
基金financially supported by the National Natural Science Foundation of China(52073302,52103311)Hunan Provincial Natural Science Foundation for Distinguished Young Scholars(No.14JJ1001).
文摘Nowadays,the increasing electromagnetic waves generated by wearable devices are becoming an emerging issue for human health,so stretchable electromagnetic interference(EMI)shielding materials are highly demanded.Elephant trunks are capable of grabbing fragile vegetation and tearing trees thanks not only to their muscles but also to their folded skins.Inspired by the wrinkled skin of the elephant trunks,herein,we propose a winkled conductive film based on single-walled carbon nanotubes(SWCNTs)for multifunctional EMI applications.The conductive film has a sandwich structure,which was prepared by coating SWCNTs on both sides of the stretched elastic latex cylindrical substrate.The shrinking-induced winkled conductive network could withstand up to 200%tensile strain.Typically,when the stretching direction is parallel to the polarization direction of the electric field,the total EMI shielding effectiveness could surprisingly increase from 38.4 to 52.7 dB at 200%tensile strain.It is mainly contributed by the increased connection of the SWCNTs.In addition,the film also has good Joule heating performance at several voltages,capable of releasing pains in injured joints.This unique property makes it possible for strain-adjustable multifunctional EMI shielding and wearable thermotherapy applications.
基金supported by the Natural Science Foundation of Ningbo city,China(Grant No.2023J010)Natural Science Foundation of China(Grant Nos.52275343,62074013 and U23A20363)supported by the Fundamental Research Funds for the Provincial Universities of Zhejiang(Grant No.SJLY2024007)
文摘The rapid development of stretchable electronics made by circuits,microchips,and encapsulation elastomers has caused the production of a large amount of electronic waste(e-waste).The degradation of elastomers can highly minimize the negative effects of e-wastes.However,chemicals that included acid,alkali,and organics were repeatedly used during the recycling process,which were environmentally unfriendly.Here,a water-modulation-degradation-reconstruction(WDR)polyvinylpyrrolidone(PVP)-honey composite(PHC)polymer-gel was developed and could be regarded as encapsulation elastomers to realize a fully recyclable water-degradable stretchable(WS)electronics with multi-functions.The stretchability of the PHC polymer-gel could be modulated by the change of its water retention.The Chip-integrated liquid metal(LM)circuits encapsulated with the modulated PHC encapsulation elastomer could withstand a strain value of~3000%.Moreover,we developed a WS biomedical sensor composed of PHC encapsulation elastomer,LM circuits,and microchips,which could be fully recycled by biodegrading it in water to reconstruct a new one.As before,the reconstructed WS biomedical sensor could still simultaneously realize the combination of ultra-stretchability,recycling,self-healing,self-adhesive,and self-conformal abilities.The results revealed that this study exercises a profound influence on the rational design of multi-functional WS electronics.
基金supports from the National Natural Science Foundation of China(61801525)the independent fund of the State Key Laboratory of Optoelectronic Materials and Technologies(Sun Yat-sen University)under grant No.OEMT-2022-ZRC-05+3 种基金the Opening Project of State Key Laboratory of Polymer Materials Engineering(Sichuan University)(Grant No.sklpme2023-3-5))the Foundation of the state key Laboratory of Transducer Technology(No.SKT2301),Shenzhen Science and Technology Program(JCYJ20220530161809020&JCYJ20220818100415033)the Young Top Talent of Fujian Young Eagle Program of Fujian Province and Natural Science Foundation of Fujian Province(2023J02013)National Key R&D Program of China(2022YFB2802051).
文摘Post-earthquake rescue missions are full of challenges due to the unstable structure of ruins and successive aftershocks.Most of the current rescue robots lack the ability to interact with environments,leading to low rescue efficiency.The multimodal electronic skin(e-skin)proposed not only reproduces the pressure,temperature,and humidity sensing capabilities of natural skin but also develops sensing functions beyond it—perceiving object proximity and NO2 gas.Its multilayer stacked structure based on Ecoflex and organohydrogel endows the e-skin with mechanical properties similar to natural skin.Rescue robots integrated with multimodal e-skin and artificial intelligence(AI)algorithms show strong environmental perception capabilities and can accurately distinguish objects and identify human limbs through grasping,laying the foundation for automated post-earthquake rescue.Besides,the combination of e-skin and NO2 wireless alarm circuits allows robots to sense toxic gases in the environment in real time,thereby adopting appropriate measures to protect trapped people from the toxic environment.Multimodal e-skin powered by AI algorithms and hardware circuits exhibits powerful environmental perception and information processing capabilities,which,as an interface for interaction with the physical world,dramatically expands intelligent robots’application scenarios.
基金This project was financially supported by the Research Grants Council(GRF Projects:16229216,16209917,16205517)the Innovation and Technology Commission(ITS/012/19)of Hong Kong SAR.
文摘Flexible multidirectional strain sensors are crucial to accurately determining the complex strain states involved in emerging sensing applications.Although considerable efforts have been made to construct anisotropic structures for improved selective sensing capabilities,existing anisotropic sensors suffer from a trade-off between high sensitivity and high stretchability with acceptable linearity.Here,an ultrasensitive,highly selective multidirectional sensor is developed by rational design of functionally different anisotropic layers.The bilayer sensor consists of an aligned carbon nanotube(CNT)array assembled on top of a periodically wrinkled and cracked CNT-graphene oxide film.The transversely aligned CNT layer bridge the underlying longitudinal microcracks to effectively discourage their propagation even when highly stretched,leading to superior sensitivity with a gauge factor of 287.6 across a broad linear working range of up to 100%strain.The wrinkles generated through a pre-straining/releasing routine in the direction transverse to CNT alignment is responsible for exceptional selectivity of 6.3,to the benefit of accurate detection of loading directions by the multidirectional sensor.This work proposes a unique approach to leveraging the inherent merits of two cross-influential anisotropic structures to resolve the trade-off among sensitivity,selectivity,and stretchability,demonstrating promising applications in full-range,multi-axis human motion detection for wearable electronics and smart robotics.
基金the Swedish Research Council (2016-06146,2019-02345)Swedish Research Council (grant no.2020-05223)+7 种基金the Swedish Research Council Formas,the Swedish Energy Agency (52473-1)the Wallenberg Foundation (2017.0186 and 2016.0059) for financial supportsupported by the National Research Foundation of Korea (NRF-2017M3A7B8065584 and 2020R1A4A1018516)Support from the National Natural Science Foundation of China (61774077)the Key Projects of Joint Fund of Basic and Applied Basic Research Fund of Guangdong Province (2019B1515120073)the Research Fund of Guangdong-Hong Kong-Macao Joint Laboratory for Intelligent Micro-Nano Optoelectronic Technology (No.2020B1212030010)Support from Sino-Danish Center for Education and ResearchSwedish Energy Agency (grant no.45420-1)
文摘All-polymer solar cells(all-PSCs)possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing.Introducing flexible conjugation-break spacers(FCBSs)into backbones of polymer donor(P_(D))or polymer acceptor(P_(A))has been demonstrated as an efficient approach to enhance both the photovoltaic(PV)and mechanical properties of the all-PSCs.However,length dependency of FCBS on certain all-PSC related properties has not been systematically explored.In this regard,we report a series of new non-conjugated P_(A)s by incorporating FCBS with various lengths(2,4,and 8 carbon atoms in thioalkyl segments).Unlike com-mon studies on so-called side-chain engineering,where longer side chains would lead to better solubility of those resulting polymers,in this work,we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length(i.e.,C2)in P_(A) named PYTS-C2.Its all-PSC achieves a high efficiency of 11.37%,and excellent mechanical robustness with a crack onset strain of 12.39%,significantly superior to those of the other P_(A)s.These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs,providing an effective strategy to fine-tune the structures of P_(A)s for highly efficient and mechanically robust PSCs.
基金This work was supported by the International Joint Research Center for Biomass Chemistry and Materials,Shaanxi International Science and Technology Cooperation Base(2018GHJD-19)the Shaanxi Key Industry Innovation Chain Projects(2020ZDLGY11-03)+2 种基金the Science and Technology Plan of Weiyang District of Xi'an(201910)the Scientific Research Plan Projects of Shaanxi Education Department(19JK0131)The project was also supported by the Foundation of Key Laboratory of Pulp and Paper Science and Technology of the Ministry of Education/Shandong Province of China(KF201814).
文摘Fractal-structured silver particles(FSSPs)are conductive materials with a micron-scale trunk and nanoscale branches,and are characterized with high electrical conductivity and high connectivity.In this study,FSSPs were added to an aqueous additive solution for synthesizing a conductive ink,which was used to prepare two types of printing electrodes via screen printing.The first type included two flexible printed electrodes(FPEs):an FPE on a polyethylene terephthalate(PET)film and an FPE on paper.The second one was a polydimethylsiloxane(PDMS)-embedded FPE.The PETbased FPE exhibited high electrochemical stability when its sheet resistance was 0.38Ω/sq for a 50%(w/w)content of FSSPs in the prepared conductive ink.Moreover,the embedded FPE demonstrated excellent mechanical properties and high chemical stability.In addition,the embedded structure was endowed with stretchability,which is important for different devices,such as flexible biomedical sensors and flexible electronics.
文摘The performance of the flexibility and stretchability of flexible electronics depends on the mechanical structure design,for which a great progress has been made in past years.The use of prestrain in the substrate,causing the compression of the transferred interconnects,can provide high elastic stretchability.Recently,the nonbuckling interconnects have been designed,where thick bar replaces thin ribbon layout to yield scissor-like in-plane deformation instead of in-or out-of-plane buckling modes.The nonbuckling interconnect design achieves significantly enhanced stretchability.However,combined use of prestrain and nonbuckling interconnects has not been explored.This paper aims to study the mechanical behavior of nonbuckling interconnects bonded to the prestrained substrate analytically and numerically.It is found that larger prestrain,longer straight segment,and smaller arc radius yield smaller strain in the interconnects.On the other hand,larger prestrain can also cause larger strain in the interconnects after releasing the prestrain.Therefore,the optimization of the prestrain needs to be found to achieve favorable stretchability.
基金National Natural Science Foundation of China(Nos.12002085 and 51603039)Shanghai Pujiang Program,China(No.19S10462)+3 种基金Fundamental Research Funds for the Central Universities,China(Nos.2232017D-12 and 20K10405)Key Laboratory of Textile Science and Technology(Donghua University)Ministry of Education,China(No.KLTST201623)Initial Research Funds for Young Teachers of Donghua University,China(No.104-07-005388)。
文摘The development of flexible and stretchable electronics has attracted much attention.As an important part of wearable electronic systems,the connection between conductive yarns and electronic components affects the stability and accuracy of their electrical reliability.In this paper,three different connections were attempted to electrically and mechanically link two conductive yarns,including soldering followed by waterborne polyurethane(WPU)encapsulation,coating of conductive silver adhesive with WPU encapsulation,as well as coating of conductive silver adhesive with polydimethylsiloxane(PDMS)encapsulation.The surface morphologies and electro-mechanical behaviors of the three created connected conductive yarns were characterized.Compared with their electro-mechanical behaviors of the established three connections,the connection with soldering remained electrically conductive to around 200%,which mainly came from the stress concentration between the stiff soldering and soft conductive yarns.However,the coating of conductive silver adhesive and encapsulated protection of PDMS can make the connected conductive yarns stretchable up to 300%with almost constant electrical resistance.
基金Project supported by the National Basic Research Program of China(Grant No.2012CB932302)the National Natural Science Foundation of China(Grant Nos.11634014,51172271,51372269,and 51472264)the“Strategic Priority Research Program”of the Chinese Academy of Sciences(Grant No.XDA09040202)
文摘In this work, we have presented a freestanding and flexible CNT-based film with sheet resistance of 60 ？/ and transmittance of 82% treated by nitric acid and chloroauric acid in sequence. Based on modified CNT film as a transparent electrode, we have demonstrated an ultrathin, flexible organic solar cell（OSC） fabricated on 2.5-μm PET substrate. The efficiency of OSC, combined with a composite film of poly（3-hexylthiophene）（P3HT） and phenyl-C61 butyric acid methyl ester（PCBM） as an active layer and with a thin layer of methanol soluble biuret inserted between the photoactive layer and the cathode, can be up to 2.74% which is approximate to that of the reference solar cell fabricated with ITO-coated glass（2.93%）. Incorporating the as-fabricated ITO-free OSC with pre-stretched elastomer, 50% compressive deformation can apply to the solar cells. The results show that the as-prepared CNT-based hybrid film with outstanding electrical and optical properties could serve as a promising transparent electrode for low cost, flexible and stretchable OSCs, which will broaden the applications of OSC and generate more solar power than it now does.
