According to some observed dama ge phenomena in the smart structure systems, the issues related to the damage and failures of smart structures are addressed in this paper. A few possible damage patterns and the def...According to some observed dama ge phenomena in the smart structure systems, the issues related to the damage and failures of smart structures are addressed in this paper. A few possible damage patterns and the definition of the failure of the smart structures are given. It is pointed out that more attentions should be paid to the functional failures o f smart structures. The effects on the control the static deformation due to par tial debonding of PZT actuators are analyzed by the finite element method. Preli minary numerical results show that partial debonding of PZT actuators may have a p preciate reduction on their actuating ability thus reducing the control ability and accuracy of the smart structures.展开更多
The use of piezoelectric material sensors in smart composite structures is investigated. An experimental structure bonded with lead zirconate titanate piezoelectric ceramic(PZT) sensors is developed. These bonded sens...The use of piezoelectric material sensors in smart composite structures is investigated. An experimental structure bonded with lead zirconate titanate piezoelectric ceramic(PZT) sensors is developed. These bonded sensors are employed to monitor load variations and transient impacts in the structure. Incorporated with pattern recognition approach, PZT sensors have succeeded in detecting the onset and location of damages.展开更多
The thermo-mechanical behaviors of shape memory alloy (SMA) wires reinforced smart structures with damages are analyzed through variational principle and meso-mechanical method.A governing equation on the structure is...The thermo-mechanical behaviors of shape memory alloy (SMA) wires reinforced smart structures with damages are analyzed through variational principle and meso-mechanical method.A governing equation on the structure is derived.Mathematical expressions on meso-displacement field,stress-strain field of typical element with damages are presented.A failure criterion for interface failure between SMA wires and matrix is established under two kinds of actuation which are dead-load and temperature,where the temperature is included in effective free restoring strain.In addition,there are some other composing factors in the failure criterion such as interface properties,thermodynamical properties of SMA,initial debonding length L-l,etc.The results are significant to understand structural strength self-adaptive control and failure mechanism of SMA wires reinforced smart structures with damages,and provide a theoretical foundation for further study on the integrity of SMA smart structures.展开更多
This study presents a generalized two-dimensional model for evaluating the stationary hygro-thermo-mechanical response of laminated shell structures made of advanced materials.It introduces a generalized kinematic mod...This study presents a generalized two-dimensional model for evaluating the stationary hygro-thermo-mechanical response of laminated shell structures made of advanced materials.It introduces a generalized kinematic model,enabling the assessment of arbitrary values of temperature variation and mass concentration variation for the unvaried configuration at the top and bottom surfaces.This is achieved through the Equivalent Layer-Wise description of the unknown field variable using higher-order polynomials and zigzag functions.In addition,an elastic foundation is modeled utilizing the Winkler-Pasternak theory.The fundamental equations,derived from the total free energy of the system,are solved analytically using Navier’s method.Then,the Fourier-based generalized differential quadrature numerical method is adopted to efficiently recover the through-the-thickness distribution of secondary variables in agreement with the hygro-thermal loading conditions.The formulation is applied in some examples of investigation where the response of panels of different curvature and lamination schemes is evaluated under external hygro-thermal fluxes and prescribed values of temperature and moisture concentration.In addition,this study investigates the effect of the hygro-thermal coupling due to Dufour and Soret effect.The present formulation is verified to be a valuable tool for reducing computational effort and determining the effect on the mechanical response of laminated structures in a thermal and hygrometric environment.展开更多
Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. T...Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. There are several typical structures such as the cabin of an airplane, space station, the solar board of satellite and the rotor blade of a helicopter, of which the vibrations and radiation noises have bad influences on precise equipments and aiming systems. In order to suppress vibrations and noises of these structures, several algorithms are applied to the models which simulate the structures. Experiments are performed to suppress vibrations and noises by bonding sensors and actuators to the structures at the optimized locations and using computer based measurement and control systems. For the blade vibration control of a helicopter, a non contact method of signal transmission by magneto electric coupling is discussed. The experimental results demonstrate that the methods used for active control are effective.展开更多
Smart structures have the advantages of high system integrity and diverse sensing capabilities.However,the labor-intensive and timeconsuming fabrication process hinders the large-scale adoption of smart structures.Des...Smart structures have the advantages of high system integrity and diverse sensing capabilities.However,the labor-intensive and timeconsuming fabrication process hinders the large-scale adoption of smart structures.Despite recent attempts to develop sensorembedded structures using 3D printing technologies,the reported smart structures generally suffer from the complex fabrication process,constrained part size,and limited sensing modality.Herein,we propose a workflow to design and fabricate novel smart structures via multi-material fused deposition modeling(FDM)-based 3D printing.More specifically,conductive filaments with tailorable mechanical and elec-trical properties,e.g.piezoresistive effects,were developed.Additionally,the printing process was optimized for processing soft filaments with Young’s modulus around 2 MPa,resolving the issue of filament buckling.Furthermore,the potential applications of the proposed workflow were showcased using three design cases,i.e.biaxial strain sensor,smart tire,and cable-driven soft finger with multiple sensing capabilities.This workflow provides a cost-effective and rapid solution for developing novel smart structures with soft materials.展开更多
This article presents a type of plate Finite Element(FE)models with adaptive mathematical refinement capabilities for modeling laminated smart structures with piezoelectric layers or distributed patches.The p-version ...This article presents a type of plate Finite Element(FE)models with adaptive mathematical refinement capabilities for modeling laminated smart structures with piezoelectric layers or distributed patches.The p-version shape functions are used in combination with the higher-order Layer-Wise(LW)kinematics adopting hierarchical Legendre polynomials.Node-Dependent Kinematics(NDK)is employed to implement local LW models in the regions with piezoelectric components and simulate the global substrate structure with the Equivalent Single-Layer(ESL)approach.Through the proposed NDK FE models,the electro-mechanical behavior of smart structures can be predicted with high fidelity and numerical efficiency,and various patch configurations can be conveniently modeled through one set of mesh grids.Moreover,the effectiveness and efficiency of the NDK FE approach are assessed through numerical examples and its application is demonstrated.展开更多
Epidermal electrophysiological monitoring has garnered significant attention for its potential in medical diagnosis and healthcare,particularly in continuous signal recording.However,simultaneously satisfying skin com...Epidermal electrophysiological monitoring has garnered significant attention for its potential in medical diagnosis and healthcare,particularly in continuous signal recording.However,simultaneously satisfying skin compliance,mechanical properties,environmental adaptation,and biocompatibility to avoid signal attenuation and motion artifacts is challenging,and accurate physiological feature extraction necessitates effective signal-processing algorithms.This review presents the latest advancements in smart electrodes for epidermal electrophysiological monitoring,focusing on materials,structures,and algorithms.First,smart materials incorporating self-adhesion,self-healing,and self-sensing functions offer promising solutions for long-term monitoring.Second,smart meso-structures,together with micro/nanostructures endowed the electrodes with self-adaption and multifunctionality.Third,intelligent algorithms give smart electrodes a“soul,”facilitating faster and more-accurate identification of required information via automatic processing of collected electrical signals.Finally,the existing challenges and future opportunities for developing smart electrodes are discussed.Recognized as a crucial direction for next-generation epidermal electrodes,intelligence holds the potential for extensive,effective,and transformative applications in the future.展开更多
Recent engineering applications increasingly adopt smart materials,whose mechanical responses are sensitive to magnetic and electric fields.In this context,new and computationally efficient modeling strategies are ess...Recent engineering applications increasingly adopt smart materials,whose mechanical responses are sensitive to magnetic and electric fields.In this context,new and computationally efficient modeling strategies are essential to predict the multiphysic behavior of advanced structures accurately.Therefore,the manuscript presents a higher-order formulation for the static analysis of laminated anisotropic magneto-electro-elastic doubly-curved shell structures.The fundamental relations account for the full coupling between the electric field,magnetic field,and mechanical elasticity.The configuration variables are expanded along the thickness direction using a generalized formulation based on the Equivalent Layer-Wise approach.Higher-order polynomials are selected,allowing for the assessment of prescribed values of the configuration variables at the top and bottom sides of solids.In addition,an effective strategy is provided for modeling general surface distributions of mechanical pressures and electromagnetic external fluxes.The model is based on a continuum-based formulation which employs an analytical homogenization of the multifield material properties,based on Mori&Tanaka approach,of a magneto-electro-elastic composite material obtained from a piezoelectric and a piezomagnetic phase,with coupled magneto-electro-elastic effects.A semi-analytical Navier solution is applied to the fundamental equations,and an efficient post-processing equilibrium-based procedure is here used,based on the numerical assessment with the Generalized Differential Quadrature(GDQ)method,to recover the response of three-dimensional shells.The formulation is validated through various examples,investigating the multifield response of panels of different curvatures and lamination schemes.An efficient homogenization procedure,based on the Mori&Tanaka approach,is employed to obtain the three-dimensional constitutive relation of magneto-electro-elastic materials.Each model is validated against three-dimensional finite-element simulations,as developed in commercial codes.Furthermore,the full coupling effect between the electric and magnetic response is evaluated via a parametric investigation,with useful insights for design purposes of many engineering applications.The paper,thus,provides a formulation for the magneto-electro-elastic analysis of laminated structures,with a high computational efficiency,since it provides results with three-dimensional capabilities with a two-dimensional formulation.The adoption of higher-order theories,indeed,allows us to efficiently predict not only the mechanical response of the structure as happens in existing literature,but also the through-the-thickness distribution of electric and magnetic variables.A novel higher-order theory has been proposed in this work for the magneto-electro-elastic analysis of laminated shell structures with varying curvatures.This theory employs a generalized method to model the distribution of the displacement field components,electrostatic,and magneto-static potential,accounting for higher-order polynomials.The thickness functions have been defined to prescribe the arbitrary values of configuration variables at the top and bottom surfaces,even though the model is ESL-based.The fundamental governing equations have been derived in curvilinear principal coordinates,considering all coupling effects among different physical phenomena,including piezoelectric,piezomagnetic,and magneto-electric effects.A homogenization algorithm based on a Mori&Tanaka approach has been adopted to obtain the equivalent magneto-electro-mechanical properties of a two-phase transversely isotropic composite.In addition,an effective method has been adopted involving the external loads in terms of surface tractions,as well as the electric and magnetic fluxes.In the post-processing stage,a GDQ-based procedure provides the actual 3D response of a doubly-curved solid.The model has been validated through significant numerical examples,showing that the results of this semi-analytical theory align well with those obtained from 3D numerical models from commercial codes.In particular,the accuracy of the model has been verified for lamination schemes with soft layers and various curvatures under different loading conditions.Moreover,this formulation has been used to predict the effect of combined electric and magnetic loads on the mechanical response of panels with different curvatures and lamination schemes.As a consequence,this theory can be applied in engineering applications where the combined effect of electric and magnetic loads is crucial,thus facilitating their study and design.An existing limitation of this study is that the solution is that it is derived only for structures with uniform curvature,cross-ply lamination scheme,and simply supported boundary conditions.Furthermore,it requires that each lamina within the stacking sequence exhibits magneto-electro-elastic behavior.Therefore,at the present stage,it cannot be used for multifield analysis of classical composite structures with magneto-electric patches.A further enhancement of the research work could be the derivation of a solution employing a numerical technique,to overcome the limitations of the Navier method.In this way,the same theory may be adopted to predict the multifield response of structures with variable curvatures and thickness,as well as anisotropic materials and more complicated boundary conditions.Acknowledgement:The authors are grateful to the Department of Innovation Engineering of Univer-sity of Salento for the support.展开更多
Shape memory alloy （SMA） reinforced smart structure can be used to make structural shape and strength selfadapted and structural damage self-restrained. Although SMA smart structures without damages were extensively...Shape memory alloy （SMA） reinforced smart structure can be used to make structural shape and strength selfadapted and structural damage self-restrained. Although SMA smart structures without damages were extensively studied, researches on SMA smart structures with damages have rarely been reported thus far. In this paper, thermo-mechanical behaviors of SMA fiber reinforced smart structures with damages are analyzed through a shear lag model and the variational principle, Mathematical expressions of the meso-displacement field and the stress-strain field of a typical element with damages are obtained, and a failure criterion for interface failure between SMA fibers and matrix is established, which is applied to an example. Results presented herein may provide a theoretical foundation for further studies on integrity of SMA smart structures.展开更多
The mechanical behaviors of shape memory alloy （SMA） wires reinforced smart structure with damage were analyzed through the variational principle, a governing equation for the structure was derived, mathematical exp...The mechanical behaviors of shape memory alloy （SMA） wires reinforced smart structure with damage were analyzed through the variational principle, a governing equation for the structure was derived, mathematical expressions for the meso-displacement field, stressstrain field of typical element with damage were presented, and a failure criterion for interface failure between SMA wires and matrix was established under two kinds of actuation which are dead-load and temperature, where the temperature is included in effective free restoring strain. In addition, there are some other composing factors in the failure criterion such as the interface properties, dynamical properties of SMA, initial debonding length L - l etc. The results are significant to understand structural strength self-adapted control and failure mechanism of SMA wires reinforced smart structure with damage.展开更多
In the work of developing extrinsic fabry perot interferometric (EFPI), the key technology of polishing fiber optic endfaces and coating the multilayer of dielectric films on them is raised and resolved to settle the...In the work of developing extrinsic fabry perot interferometric (EFPI), the key technology of polishing fiber optic endfaces and coating the multilayer of dielectric films on them is raised and resolved to settle the disturbance and stability problem of EFPI, which simplifies the sensing system, improves the sensor performance and reduces the cost. In this paper, the relations between the output interferential light intensity and the F P cavity length are calculated based on the theory of mode field coupling. The EFPI fiber optic sensor is adhered to a distributed smart laminate beam to detect vibration frequency and axial strain value, the results coincident with the results tested by PZT.展开更多
The design concepts, modelling and implementation of various fibre optic sensor protection systems for development in concrete structures were investigated. Design concepts and on-site requirements for surface-mounted...The design concepts, modelling and implementation of various fibre optic sensor protection systems for development in concrete structures were investigated. Design concepts and on-site requirements for surface-mounted and embedded optical fibre sensor in concrete were addressed. Finite element （FE） modelling of selected sensor protection systems in strain-transfer efficiency from the structure to the sensing region was also studied. And experimental validation of specified sensor protection system was reported. Results obtained indicate that the protection system for the sensors performs adequately in concrete environment and there is very good correlation between results obtained by the protected fibre optic sensors and conventional electrical resistance strain gauges.展开更多
Autonomous,adaptable,and multimodal locomotion capabilities,which are crucial for the advanced intelligence of biological systems.A prominent focus of investigations in the domain of bionic soft robotics pertains to t...Autonomous,adaptable,and multimodal locomotion capabilities,which are crucial for the advanced intelligence of biological systems.A prominent focus of investigations in the domain of bionic soft robotics pertains to the emulation of autonomous motion,as observed in natural organisms.This research endeavor faces the challenge of enabling spontaneous and sustained motion in soft robots without relying on external stimuli.Considerable progress has been made in the development of autonomous bionic soft robots that utilize smart polymer materials,particularly in the realms of material design,microfabrication technology,and operational mechanisms.Nonetheless,there remains a conspicuous deficiency in the literature concerning a thorough review of this subject matter.This study aims to provide a comprehensive review of autonomous soft robots that have been developed based on self-regulation strategies that encompass self-propulsion,self-oscillation,multistimulus response,and topological constraint structures.Furthermore,this review engages in an in-depth discussion regarding their tunable selfsustaining motion and recovery capabilities,while also contemplating the future development of autonomous soft robotic systems and their potential applications in fields such as biomechanics.展开更多
Some basic concepts about the active structures were firstly explained, and the main subjects to study in the field of active structure dynamics were synthesized. For the linear active structures, the annotations on t...Some basic concepts about the active structures were firstly explained, and the main subjects to study in the field of active structure dynamics were synthesized. For the linear active structures, the annotations on the modes were done in detail. The physical meanings of the right and left eigenvectors were explained. The right eigenvectors are the modal shapes and the modal responses of an active structure depend on the left ones. The adjoint structure of an active structure was defined and the reciprocity theorem was interpreted. For two active structures, which are adjoint to each other and with the reciprocal gain-matrices, the right and left eigenvector are reciprocal. The relationship between an active structure and the corresponding passive structure is expressed with the transfer functions, which is employed to resolve the estimation problems.展开更多
This study systematically introduces the development of the world’s first full-link and full-system ground demonstration and verification system for the OMEGA space solar power satellite(SSPS).First,the OMEGA 2.0 inn...This study systematically introduces the development of the world’s first full-link and full-system ground demonstration and verification system for the OMEGA space solar power satellite(SSPS).First,the OMEGA 2.0 innovation design was proposed.Second,field-coupling theoretical models of sunlight concentration,photoelectric conversion,and transmitting antennas were established,and a systematic optimization design method was proposed.Third,a beam waveform optimization methodology considering both a high beam collection efficiency and a circular stepped beam shape was proposed.Fourth,a control strategy was developed to control the condenser pointing toward the sun while maintaining the transmitting antenna toward the rectenna.Fifth,a high-efficiency heat radiator design method based on bionics and topology optimization was proposed.Sixth,a method for improving the rectenna array’s reception,rectification,and direct current(DC)power synthesis efficiencies is presented.Seventh,high-precision measurement technology for high-accuracy beam-pointing control was developed.Eighth,a smart mechanical structure was designed and developed.Finally,the developed SSPS ground demonstration and verification system has the capacity for sun tracking,a high concentration ratio,photoelectric conversion,microwave conversion and emission,microwave reception,and rectification,and thus satisfactory results were obtained.展开更多
Structural modularization,lightweight and functional integration are the urgent devel-opment directions for next generation high-performance aeroengines.Heat concentration during aeroengine operation would lead to loc...Structural modularization,lightweight and functional integration are the urgent devel-opment directions for next generation high-performance aeroengines.Heat concentration during aeroengine operation would lead to local high temperature,which tremendously negative impacts on aeroengine structural life and performance.Therefore,the design and optimization of radiator structures are significant for the efficiency and reliability of aeroengine.The structural geometry design and layout optimization of radiators is promising to improve the heat dissipation efficiency and reduce aerodynamic loss.The purpose of this study is to investigate the state of the art and perspectives of aeroengine radiator structural design by a comprehensive literature review.The main contents involve the review on the structural design and layout optimization technologies of radiator structures,the analyses of the structural features,design theory and methods of existed radiator structures,the induction of the theory and method of different radiators structural opti-mization design,and the discussion on the application perspectives of advanced structures in aeroengine radiators,the report on the current challenges and development directions of the design of radiator structures,including smart materials,lattice structures,variable structures,advanced optimization theories and methods,heat dissipation methods and so forth.The efforts of this study are promising to support the high-performance and lightweight design of aeroengine structures besides radiators,and thermal management system.展开更多
The method for self diagnose and self repair of composite materials using hollow optical fiber with injected adhesive is first put forward. The investigation and analysis of pass light mechanism of hollow optical ...The method for self diagnose and self repair of composite materials using hollow optical fiber with injected adhesive is first put forward. The investigation and analysis of pass light mechanism of hollow optical fiber are made in detail. The measurement principle, method and experimental research on self diagnose of the rupture place in composite materials by using hollow optical fiber are also put forward. Experiments on composite materials with or without embedded optical fiber are performed according to Chinese test standards in order to find out the comparable characters. Based on the experimental results, it is found that there is only little difference on the mechanical behavior of composite materials with or without embedded hollow optical fibers. In other words, this method can be used in engineering practice, such as in smart structures and other fields. Finally the general scheme of the entire system is given.展开更多
Shape Memory Alloy (SMA) optically activated is the key technology of optical SMA activator.According to the shape memory mechanism of SMA,researches are done on the activating response time and light wavelength of ac...Shape Memory Alloy (SMA) optically activated is the key technology of optical SMA activator.According to the shape memory mechanism of SMA,researches are done on the activating response time and light wavelength of activating source etc of SMA optically activated to approach the parameters selection of optical activation.SMA has the optimum efficiency in the range of 13 seconds to 27 seconds when SMA is illuminated continuously by wavelength of 675nm;The power of light wave has a low effect on SMA;The longer the activating wavelength,the quicker the response time of SMA activated.If the proper activating time and activating wavelength are adopted, and the structure deformation of composite material of SMA imbedded may be actively controlled,an ideal effect will be gotten.The research provides an evidence for the design of optical SMA activator and is of great significance to its application.The research on smart structure has a wide application prospect.展开更多
This research presents a finite element formulation based on four-variable refined plate theory for bending analysis of cross-ply and angle-ply laminated composite plates integrated with a piezoelectric fiber-reinforc...This research presents a finite element formulation based on four-variable refined plate theory for bending analysis of cross-ply and angle-ply laminated composite plates integrated with a piezoelectric fiber-reinforced composite actuator under electromechanical loading. The four-variable refined plate theory is a simple and efficient higher-order shear deformation theory, which predicts parabolic variation of transverse shear stresses across the plate thickness and satisfies zero traction conditions on the plate free surfaces. The weak form of governing equations is derived using the principle of minimum potential energy, and a 4-node non-conforming rectangular plate element with 8 degrees of freedom per node is introduced for discretizing the domain. Several benchmark problems are solved by the developed MATLAB code and the obtained results are compared with those from exact and other numerical solutions, showing good agreement.展开更多
文摘According to some observed dama ge phenomena in the smart structure systems, the issues related to the damage and failures of smart structures are addressed in this paper. A few possible damage patterns and the definition of the failure of the smart structures are given. It is pointed out that more attentions should be paid to the functional failures o f smart structures. The effects on the control the static deformation due to par tial debonding of PZT actuators are analyzed by the finite element method. Preli minary numerical results show that partial debonding of PZT actuators may have a p preciate reduction on their actuating ability thus reducing the control ability and accuracy of the smart structures.
文摘The use of piezoelectric material sensors in smart composite structures is investigated. An experimental structure bonded with lead zirconate titanate piezoelectric ceramic(PZT) sensors is developed. These bonded sensors are employed to monitor load variations and transient impacts in the structure. Incorporated with pattern recognition approach, PZT sensors have succeeded in detecting the onset and location of damages.
文摘The thermo-mechanical behaviors of shape memory alloy (SMA) wires reinforced smart structures with damages are analyzed through variational principle and meso-mechanical method.A governing equation on the structure is derived.Mathematical expressions on meso-displacement field,stress-strain field of typical element with damages are presented.A failure criterion for interface failure between SMA wires and matrix is established under two kinds of actuation which are dead-load and temperature,where the temperature is included in effective free restoring strain.In addition,there are some other composing factors in the failure criterion such as interface properties,thermodynamical properties of SMA,initial debonding length L-l,etc.The results are significant to understand structural strength self-adaptive control and failure mechanism of SMA wires reinforced smart structures with damages,and provide a theoretical foundation for further study on the integrity of SMA smart structures.
基金funded by the Project PNRR M4C2—Innovation grant DIRECT:Digital twIns foR EmergenCy supporT—CUP F83C22000740001.
文摘This study presents a generalized two-dimensional model for evaluating the stationary hygro-thermo-mechanical response of laminated shell structures made of advanced materials.It introduces a generalized kinematic model,enabling the assessment of arbitrary values of temperature variation and mass concentration variation for the unvaried configuration at the top and bottom surfaces.This is achieved through the Equivalent Layer-Wise description of the unknown field variable using higher-order polynomials and zigzag functions.In addition,an elastic foundation is modeled utilizing the Winkler-Pasternak theory.The fundamental equations,derived from the total free energy of the system,are solved analytically using Navier’s method.Then,the Fourier-based generalized differential quadrature numerical method is adopted to efficiently recover the through-the-thickness distribution of secondary variables in agreement with the hygro-thermal loading conditions.The formulation is applied in some examples of investigation where the response of panels of different curvature and lamination schemes is evaluated under external hygro-thermal fluxes and prescribed values of temperature and moisture concentration.In addition,this study investigates the effect of the hygro-thermal coupling due to Dufour and Soret effect.The present formulation is verified to be a valuable tool for reducing computational effort and determining the effect on the mechanical response of laminated structures in a thermal and hygrometric environment.
文摘Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. There are several typical structures such as the cabin of an airplane, space station, the solar board of satellite and the rotor blade of a helicopter, of which the vibrations and radiation noises have bad influences on precise equipments and aiming systems. In order to suppress vibrations and noises of these structures, several algorithms are applied to the models which simulate the structures. Experiments are performed to suppress vibrations and noises by bonding sensors and actuators to the structures at the optimized locations and using computer based measurement and control systems. For the blade vibration control of a helicopter, a non contact method of signal transmission by magneto electric coupling is discussed. The experimental results demonstrate that the methods used for active control are effective.
基金This work was supported by the National Key Research and Development Program of China[No.2020YFB1312900]National Natural Science Foundation of China[No.52105261]Guangdong Basic and Applied Basic Research Foundation[No.2022A1515010316].
文摘Smart structures have the advantages of high system integrity and diverse sensing capabilities.However,the labor-intensive and timeconsuming fabrication process hinders the large-scale adoption of smart structures.Despite recent attempts to develop sensorembedded structures using 3D printing technologies,the reported smart structures generally suffer from the complex fabrication process,constrained part size,and limited sensing modality.Herein,we propose a workflow to design and fabricate novel smart structures via multi-material fused deposition modeling(FDM)-based 3D printing.More specifically,conductive filaments with tailorable mechanical and elec-trical properties,e.g.piezoresistive effects,were developed.Additionally,the printing process was optimized for processing soft filaments with Young’s modulus around 2 MPa,resolving the issue of filament buckling.Furthermore,the potential applications of the proposed workflow were showcased using three design cases,i.e.biaxial strain sensor,smart tire,and cable-driven soft finger with multiple sensing capabilities.This workflow provides a cost-effective and rapid solution for developing novel smart structures with soft materials.
基金carried out within the project FULLCOMP(Fully analysis,design,manufacturing,and health monitoring of Composite structures),funded by the European Union Horizon 2020 Research and Innovation Program under the Marie Sklodowska Curie Grant Agreement(No.642121)the Russian Science Foundation(No.18-19-00092)the financial support from National Natural Science Foundation of China(No.52005451)。
文摘This article presents a type of plate Finite Element(FE)models with adaptive mathematical refinement capabilities for modeling laminated smart structures with piezoelectric layers or distributed patches.The p-version shape functions are used in combination with the higher-order Layer-Wise(LW)kinematics adopting hierarchical Legendre polynomials.Node-Dependent Kinematics(NDK)is employed to implement local LW models in the regions with piezoelectric components and simulate the global substrate structure with the Equivalent Single-Layer(ESL)approach.Through the proposed NDK FE models,the electro-mechanical behavior of smart structures can be predicted with high fidelity and numerical efficiency,and various patch configurations can be conveniently modeled through one set of mesh grids.Moreover,the effectiveness and efficiency of the NDK FE approach are assessed through numerical examples and its application is demonstrated.
基金supported by Science and Technology Innovation 2030-Major Project(Grant No.2022ZD0208601)the National Natural Science Foundation of China(Grant Nos.62104056,62106041,and 62204204)+2 种基金the Shanghai Sailing Program(Grant No.21YF1451000)the Key Research and Development Program of Shaanxi(Grant No.2022GY-001)the Fundamental Research Funds for the Central Universities(Grant No.223202100019).
文摘Epidermal electrophysiological monitoring has garnered significant attention for its potential in medical diagnosis and healthcare,particularly in continuous signal recording.However,simultaneously satisfying skin compliance,mechanical properties,environmental adaptation,and biocompatibility to avoid signal attenuation and motion artifacts is challenging,and accurate physiological feature extraction necessitates effective signal-processing algorithms.This review presents the latest advancements in smart electrodes for epidermal electrophysiological monitoring,focusing on materials,structures,and algorithms.First,smart materials incorporating self-adhesion,self-healing,and self-sensing functions offer promising solutions for long-term monitoring.Second,smart meso-structures,together with micro/nanostructures endowed the electrodes with self-adaption and multifunctionality.Third,intelligent algorithms give smart electrodes a“soul,”facilitating faster and more-accurate identification of required information via automatic processing of collected electrical signals.Finally,the existing challenges and future opportunities for developing smart electrodes are discussed.Recognized as a crucial direction for next-generation epidermal electrodes,intelligence holds the potential for extensive,effective,and transformative applications in the future.
基金funded by the Project PNRR M4C2—Innovation Grant DIRECT:Digital twIns foR EmergenCy supporT—CUP F83C22000740001.
文摘Recent engineering applications increasingly adopt smart materials,whose mechanical responses are sensitive to magnetic and electric fields.In this context,new and computationally efficient modeling strategies are essential to predict the multiphysic behavior of advanced structures accurately.Therefore,the manuscript presents a higher-order formulation for the static analysis of laminated anisotropic magneto-electro-elastic doubly-curved shell structures.The fundamental relations account for the full coupling between the electric field,magnetic field,and mechanical elasticity.The configuration variables are expanded along the thickness direction using a generalized formulation based on the Equivalent Layer-Wise approach.Higher-order polynomials are selected,allowing for the assessment of prescribed values of the configuration variables at the top and bottom sides of solids.In addition,an effective strategy is provided for modeling general surface distributions of mechanical pressures and electromagnetic external fluxes.The model is based on a continuum-based formulation which employs an analytical homogenization of the multifield material properties,based on Mori&Tanaka approach,of a magneto-electro-elastic composite material obtained from a piezoelectric and a piezomagnetic phase,with coupled magneto-electro-elastic effects.A semi-analytical Navier solution is applied to the fundamental equations,and an efficient post-processing equilibrium-based procedure is here used,based on the numerical assessment with the Generalized Differential Quadrature(GDQ)method,to recover the response of three-dimensional shells.The formulation is validated through various examples,investigating the multifield response of panels of different curvatures and lamination schemes.An efficient homogenization procedure,based on the Mori&Tanaka approach,is employed to obtain the three-dimensional constitutive relation of magneto-electro-elastic materials.Each model is validated against three-dimensional finite-element simulations,as developed in commercial codes.Furthermore,the full coupling effect between the electric and magnetic response is evaluated via a parametric investigation,with useful insights for design purposes of many engineering applications.The paper,thus,provides a formulation for the magneto-electro-elastic analysis of laminated structures,with a high computational efficiency,since it provides results with three-dimensional capabilities with a two-dimensional formulation.The adoption of higher-order theories,indeed,allows us to efficiently predict not only the mechanical response of the structure as happens in existing literature,but also the through-the-thickness distribution of electric and magnetic variables.A novel higher-order theory has been proposed in this work for the magneto-electro-elastic analysis of laminated shell structures with varying curvatures.This theory employs a generalized method to model the distribution of the displacement field components,electrostatic,and magneto-static potential,accounting for higher-order polynomials.The thickness functions have been defined to prescribe the arbitrary values of configuration variables at the top and bottom surfaces,even though the model is ESL-based.The fundamental governing equations have been derived in curvilinear principal coordinates,considering all coupling effects among different physical phenomena,including piezoelectric,piezomagnetic,and magneto-electric effects.A homogenization algorithm based on a Mori&Tanaka approach has been adopted to obtain the equivalent magneto-electro-mechanical properties of a two-phase transversely isotropic composite.In addition,an effective method has been adopted involving the external loads in terms of surface tractions,as well as the electric and magnetic fluxes.In the post-processing stage,a GDQ-based procedure provides the actual 3D response of a doubly-curved solid.The model has been validated through significant numerical examples,showing that the results of this semi-analytical theory align well with those obtained from 3D numerical models from commercial codes.In particular,the accuracy of the model has been verified for lamination schemes with soft layers and various curvatures under different loading conditions.Moreover,this formulation has been used to predict the effect of combined electric and magnetic loads on the mechanical response of panels with different curvatures and lamination schemes.As a consequence,this theory can be applied in engineering applications where the combined effect of electric and magnetic loads is crucial,thus facilitating their study and design.An existing limitation of this study is that the solution is that it is derived only for structures with uniform curvature,cross-ply lamination scheme,and simply supported boundary conditions.Furthermore,it requires that each lamina within the stacking sequence exhibits magneto-electro-elastic behavior.Therefore,at the present stage,it cannot be used for multifield analysis of classical composite structures with magneto-electric patches.A further enhancement of the research work could be the derivation of a solution employing a numerical technique,to overcome the limitations of the Navier method.In this way,the same theory may be adopted to predict the multifield response of structures with variable curvatures and thickness,as well as anisotropic materials and more complicated boundary conditions.Acknowledgement:The authors are grateful to the Department of Innovation Engineering of Univer-sity of Salento for the support.
基金The project supported by the National Natural Science Foundation of China(10072026.50135030) Aeronautical Science Foundation of China(01G52041)
文摘Shape memory alloy （SMA） reinforced smart structure can be used to make structural shape and strength selfadapted and structural damage self-restrained. Although SMA smart structures without damages were extensively studied, researches on SMA smart structures with damages have rarely been reported thus far. In this paper, thermo-mechanical behaviors of SMA fiber reinforced smart structures with damages are analyzed through a shear lag model and the variational principle, Mathematical expressions of the meso-displacement field and the stress-strain field of a typical element with damages are obtained, and a failure criterion for interface failure between SMA fibers and matrix is established, which is applied to an example. Results presented herein may provide a theoretical foundation for further studies on integrity of SMA smart structures.
基金Project partially supported by the Aeronautical Science Foundation of China (No. 05G52054).
文摘The mechanical behaviors of shape memory alloy （SMA） wires reinforced smart structure with damage were analyzed through the variational principle, a governing equation for the structure was derived, mathematical expressions for the meso-displacement field, stressstrain field of typical element with damage were presented, and a failure criterion for interface failure between SMA wires and matrix was established under two kinds of actuation which are dead-load and temperature, where the temperature is included in effective free restoring strain. In addition, there are some other composing factors in the failure criterion such as the interface properties, dynamical properties of SMA, initial debonding length L - l etc. The results are significant to understand structural strength self-adapted control and failure mechanism of SMA wires reinforced smart structure with damage.
文摘In the work of developing extrinsic fabry perot interferometric (EFPI), the key technology of polishing fiber optic endfaces and coating the multilayer of dielectric films on them is raised and resolved to settle the disturbance and stability problem of EFPI, which simplifies the sensing system, improves the sensor performance and reduces the cost. In this paper, the relations between the output interferential light intensity and the F P cavity length are calculated based on the theory of mode field coupling. The EFPI fiber optic sensor is adhered to a distributed smart laminate beam to detect vibration frequency and axial strain value, the results coincident with the results tested by PZT.
文摘The design concepts, modelling and implementation of various fibre optic sensor protection systems for development in concrete structures were investigated. Design concepts and on-site requirements for surface-mounted and embedded optical fibre sensor in concrete were addressed. Finite element （FE） modelling of selected sensor protection systems in strain-transfer efficiency from the structure to the sensing region was also studied. And experimental validation of specified sensor protection system was reported. Results obtained indicate that the protection system for the sensors performs adequately in concrete environment and there is very good correlation between results obtained by the protected fibre optic sensors and conventional electrical resistance strain gauges.
基金supported by the National Natural Science Foundation of China(Nos.52275290 and 51905222)the Research Project of State Key Laboratory of Mechanical System and Oscillation(No.MSV202419)+2 种基金Major Program of the National Natural Science Foundation of China(NSFC)for Basic Theory and Key Technology of Tri-Co Robots(No.92248301)Opening Project of the Key Laboratory of Bionic Engineering(Ministry of Education),Jilin University(No.KF2023006)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.SJCX23_2091)。
文摘Autonomous,adaptable,and multimodal locomotion capabilities,which are crucial for the advanced intelligence of biological systems.A prominent focus of investigations in the domain of bionic soft robotics pertains to the emulation of autonomous motion,as observed in natural organisms.This research endeavor faces the challenge of enabling spontaneous and sustained motion in soft robots without relying on external stimuli.Considerable progress has been made in the development of autonomous bionic soft robots that utilize smart polymer materials,particularly in the realms of material design,microfabrication technology,and operational mechanisms.Nonetheless,there remains a conspicuous deficiency in the literature concerning a thorough review of this subject matter.This study aims to provide a comprehensive review of autonomous soft robots that have been developed based on self-regulation strategies that encompass self-propulsion,self-oscillation,multistimulus response,and topological constraint structures.Furthermore,this review engages in an in-depth discussion regarding their tunable selfsustaining motion and recovery capabilities,while also contemplating the future development of autonomous soft robotic systems and their potential applications in fields such as biomechanics.
文摘Some basic concepts about the active structures were firstly explained, and the main subjects to study in the field of active structure dynamics were synthesized. For the linear active structures, the annotations on the modes were done in detail. The physical meanings of the right and left eigenvectors were explained. The right eigenvectors are the modal shapes and the modal responses of an active structure depend on the left ones. The adjoint structure of an active structure was defined and the reciprocity theorem was interpreted. For two active structures, which are adjoint to each other and with the reciprocal gain-matrices, the right and left eigenvector are reciprocal. The relationship between an active structure and the corresponding passive structure is expressed with the transfer functions, which is employed to resolve the estimation problems.
文摘This study systematically introduces the development of the world’s first full-link and full-system ground demonstration and verification system for the OMEGA space solar power satellite(SSPS).First,the OMEGA 2.0 innovation design was proposed.Second,field-coupling theoretical models of sunlight concentration,photoelectric conversion,and transmitting antennas were established,and a systematic optimization design method was proposed.Third,a beam waveform optimization methodology considering both a high beam collection efficiency and a circular stepped beam shape was proposed.Fourth,a control strategy was developed to control the condenser pointing toward the sun while maintaining the transmitting antenna toward the rectenna.Fifth,a high-efficiency heat radiator design method based on bionics and topology optimization was proposed.Sixth,a method for improving the rectenna array’s reception,rectification,and direct current(DC)power synthesis efficiencies is presented.Seventh,high-precision measurement technology for high-accuracy beam-pointing control was developed.Eighth,a smart mechanical structure was designed and developed.Finally,the developed SSPS ground demonstration and verification system has the capacity for sun tracking,a high concentration ratio,photoelectric conversion,microwave conversion and emission,microwave reception,and rectification,and thus satisfactory results were obtained.
基金National Natural Science Foundation of China (Grant No.52375237)National Science and Technology Major Project (Grant No.J2022-IV-0012)+1 种基金Opening Project of the Key Laboratory of CNC Equipment Reliability,Ministry of Education,Jilin University (Grant No.JLU-cncr-202402)Research Grants Council of the Hong Kong SAR of China (Grant No.PolyU 15209520).
文摘Structural modularization,lightweight and functional integration are the urgent devel-opment directions for next generation high-performance aeroengines.Heat concentration during aeroengine operation would lead to local high temperature,which tremendously negative impacts on aeroengine structural life and performance.Therefore,the design and optimization of radiator structures are significant for the efficiency and reliability of aeroengine.The structural geometry design and layout optimization of radiators is promising to improve the heat dissipation efficiency and reduce aerodynamic loss.The purpose of this study is to investigate the state of the art and perspectives of aeroengine radiator structural design by a comprehensive literature review.The main contents involve the review on the structural design and layout optimization technologies of radiator structures,the analyses of the structural features,design theory and methods of existed radiator structures,the induction of the theory and method of different radiators structural opti-mization design,and the discussion on the application perspectives of advanced structures in aeroengine radiators,the report on the current challenges and development directions of the design of radiator structures,including smart materials,lattice structures,variable structures,advanced optimization theories and methods,heat dissipation methods and so forth.The efforts of this study are promising to support the high-performance and lightweight design of aeroengine structures besides radiators,and thermal management system.
文摘The method for self diagnose and self repair of composite materials using hollow optical fiber with injected adhesive is first put forward. The investigation and analysis of pass light mechanism of hollow optical fiber are made in detail. The measurement principle, method and experimental research on self diagnose of the rupture place in composite materials by using hollow optical fiber are also put forward. Experiments on composite materials with or without embedded optical fiber are performed according to Chinese test standards in order to find out the comparable characters. Based on the experimental results, it is found that there is only little difference on the mechanical behavior of composite materials with or without embedded hollow optical fibers. In other words, this method can be used in engineering practice, such as in smart structures and other fields. Finally the general scheme of the entire system is given.
文摘Shape Memory Alloy (SMA) optically activated is the key technology of optical SMA activator.According to the shape memory mechanism of SMA,researches are done on the activating response time and light wavelength of activating source etc of SMA optically activated to approach the parameters selection of optical activation.SMA has the optimum efficiency in the range of 13 seconds to 27 seconds when SMA is illuminated continuously by wavelength of 675nm;The power of light wave has a low effect on SMA;The longer the activating wavelength,the quicker the response time of SMA activated.If the proper activating time and activating wavelength are adopted, and the structure deformation of composite material of SMA imbedded may be actively controlled,an ideal effect will be gotten.The research provides an evidence for the design of optical SMA activator and is of great significance to its application.The research on smart structure has a wide application prospect.
文摘This research presents a finite element formulation based on four-variable refined plate theory for bending analysis of cross-ply and angle-ply laminated composite plates integrated with a piezoelectric fiber-reinforced composite actuator under electromechanical loading. The four-variable refined plate theory is a simple and efficient higher-order shear deformation theory, which predicts parabolic variation of transverse shear stresses across the plate thickness and satisfies zero traction conditions on the plate free surfaces. The weak form of governing equations is derived using the principle of minimum potential energy, and a 4-node non-conforming rectangular plate element with 8 degrees of freedom per node is introduced for discretizing the domain. Several benchmark problems are solved by the developed MATLAB code and the obtained results are compared with those from exact and other numerical solutions, showing good agreement.
