期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
Numerical Simulation of Residual Circulation due to Bottom Roughness Variability Under Tidal Flows in A Semi-Enclosed Bay 被引量:10
1
作者 槐文信 T.Komatsu 曾小辉 《China Ocean Engineering》 SCIE EI 2005年第4期601-612,共12页
Nowadays there are some chronic serious environmental problems, such as eutrophication, blue tide and so on, in a complicated coastal zone or a semi-enclosed bay, because the water exchanges between an inner bay and a... Nowadays there are some chronic serious environmental problems, such as eutrophication, blue tide and so on, in a complicated coastal zone or a semi-enclosed bay, because the water exchanges between an inner bay and an outer sea is weak compared with the supply of contaminant. Under this situation, a method to improve the water quality by 3-dimensional small unsymmetrical structures has been proposed by Komatsu et al. In this paper, several numerical simulations of the tidal current and concentration for various arrangements of bottom roughness in a semi-enclosed model bay are carfled out with a depth-averaged 2-D numerical model. The model is solved by the hybrid finite analytic method with nonstaggered grid. And the SIMPLES algorithm with Rhie and Chow' s momentum interpolation technique is used for the simulation. The effect of Komatsu' s method for water purification is examined by numerical simulation. The result of numerical experiment indicates that it is possible to generate a new tidal residual current and to activate a tidal exchange by bottom roughness arrangement only. 展开更多
关键词 semi-enclosed bay bottom roughness hybrid finite analytic method water purification depth-averaged 2 D model
在线阅读 下载PDF
Influence of Reclamation Works on the Marine Environment in a Semi-Enclosed Bay 被引量:5
2
作者 Lee M. Ock Park S. Jin Kang T. Soon 《Journal of Ocean University of China》 SCIE CAS 2006年第3期219-227,共9页
The flow and seawater exchange rates have been predicted using a two-dimensional numerical model and a Lagrangian method for a semi-enclosed shallow bay where reclaiming and dredging works are scheduled. The wind effe... The flow and seawater exchange rates have been predicted using a two-dimensional numerical model and a Lagrangian method for a semi-enclosed shallow bay where reclaiming and dredging works are scheduled. The wind effect on the flow and material transport has been emphasized, and a thirty-year mean value of wind has been considered in the numerical simulation. As a whole, even after the reclaiming and dredging are conducted, the flow pattern looks similar to the original state. However, velocity variations up to 20% to 100% appear in the vicinity of the construction area. In the case of summcr wind forcing, the seawater exchange rate increases from 71.6% to 82.9% after the reclaiming and dredging, as indicated by a particle-tracking method. On the contrary, in the case of winter wind forcing, thc seawater cxchange rate appears to be 97.2% under natural conditions but decrcases slightly to 93.2% aftcr the rcclaiming and dredging. Thus, the wind forcing plays an important role in controlling the seawater exchangc rates. The seawater cxchange rate is further improved by 15% if the dredging is simultaneously carried out with the reclaiming. This suggests that the dredging can be an effective means to mitigate the variation of flow. 展开更多
关键词 DREDGING random walk method reclaiming seawater exchange rate semi-enclosed bay wind forcing
在线阅读 下载PDF
Semi-enclosed experimental system for coal spontaneous combustion for determining regional distribution of high-temperature zone of coal fire 被引量:3
3
作者 Jingyu Zhao Hanqi Ming +5 位作者 Tao Guo Yuxuan Zhang Jun Deng Jiajia Song Qiang Zeng Chi‑Min Shu 《International Journal of Coal Science & Technology》 EI CAS CSCD 2022年第5期124-137,共14页
Temperature variation and gas generation at diferent depths and positions in the coal combustion process were studied to determine the propagation and evolution of high temperature regions in the process of coal spont... Temperature variation and gas generation at diferent depths and positions in the coal combustion process were studied to determine the propagation and evolution of high temperature regions in the process of coal spontaneous combustion.This study selected coal samples from Mengcun,Shaanxi Province,People’s Republic of China,and developed a semi-enclosed experimental system(furnace)for simulating coal combustion.The thermal mass loss of coal samples under various heating rates(5,10,and 15℃/min)was analyzed through thermogravimetric analysis,and the dynamic characteristics of the coal samples were analyzed;the reliability of the semi-enclosed experimental system was verifed through the equal proportional method of fuzzy response.The results reveal that the high-temperature zone is distributed nonlinearly from the middle to the front end of the furnace,and the temperatures of points in this zone decreased gradually as the layer depth increased.The apparent activation energy of the coal samples during combustion frst increased and then decreased as the conversion degree increased.Furthermore,the proportion of mass loss and the mass loss rate in the coal samples observed in the thermogravimetric experiment is consistent with that observed in the frst and second stages of the experiment conducted using the semi-enclosed system.The research fndings can provide a theoretical basis for the prevention and control of hightemperature zones in coal combustion. 展开更多
关键词 Coalfeld fre area Fuzzy migration path semi-enclosed experimental system Thermogravimetric analysis Dynamic characteristics
在线阅读 下载PDF
Investigation of wave characteristics in a semi-enclosed bay based on SWAN model validated with buoys and ADP-observed currents
4
作者 LU Jing TENG Yong +2 位作者 CHI Wanqing YIN Liping WANG Daolong 《Journal of Oceanology and Limnology》 SCIE CAS CSCD 2019年第2期434-447,共14页
In this study, the simulating waves nearshore (SWAN) model with a locally refined curvilinear grid system was constructed to simulate waves in Jervis Bay and the neighbouring ocean of Australia, with the aim of examin... In this study, the simulating waves nearshore (SWAN) model with a locally refined curvilinear grid system was constructed to simulate waves in Jervis Bay and the neighbouring ocean of Australia, with the aim of examining the wave characteristics in an area with special topography and practical importance. This model was verified by field observations from buoys and acoustic Doppler profilers (ADPs). The model precisions were validated for both wind-generated waves and open-ocean swells. We present an approach with which to convert ADP-observed current data from near the bottom into the significant wave height. Our approach is deduced from the Fourier transform technique and the linear wave theory. The results illustrate that the location of the bay entrance is important because it allows the swells in the dominant direction to propagate into the bay despite the narrowness of the bay entrance. The wave period T p is also strongly related to the wave direction in the semi-enclosed bay. The Tp is great enough along the entire propagating direction from the bay entrance to the top of the bay, and the largest Tp appears along the north-west coast, which is the end tip of the swells’ propagation. 展开更多
关键词 wave simulating waves NEARSHORE (SWAN) acoustic Doppler PROFILERS (ADPs) buoy SWELL semi-enclosed BAY
在线阅读 下载PDF
Radial tidal current field in a semi-enclosed rectangular basin: formation and evolution
5
作者 钱学生 陈永平 +2 位作者 张长宽 潘毅 DAS Himangshu 《Chinese Journal of Oceanology and Limnology》 SCIE CAS CSCD 2015年第4期1085-1099,共15页
The radial tidal current field accounts for the formation of the radial sand ridges in the South Yellow Sea. Understanding the formation and evolution of this radial tidal current field is vital to assessing the morph... The radial tidal current field accounts for the formation of the radial sand ridges in the South Yellow Sea. Understanding the formation and evolution of this radial tidal current field is vital to assessing the morphodynamic features in the area. A semi-enclosed rectangular basin with and without a coastal barrier was schematized from the topography of the Bohai Sea and Yellow Sea. The 2D tidal current field in this basin was simulated using the DELFT3D-FLOW model. The concept of tidal wave refraction, which highlights the effect of the sloped or stepped submarine topography on the propagation of the tidal waves, was introduced to explain the formation of the radial tidal current field. Under the effect of tidal wave refraction, co-phase lines of the counterclockwise rotating tidal wave and incident tidal wave are transformed into clockwise and counterclockwise deflections, respectively, leading to the convergence and divergence of the flow field. Regardless of whether a coastal barrier exists or not, the outer radial tidal current field might emerge over certain topography. The responses of the radial tidal current field in this basin to the environmental variations such as coastline changes and bottom erosions were discussed. Results show that local protrusion near the focal point of the radial tidal current field will have limited effects on the location of the tidal system. However, a remarkable shift of the amphidromic point toward the entrance and central axis of this basin and a movement of the focal point of the radial tidal current field toward the entrance could be caused by the significant seaward coastline advance and submarine slope erosion. 展开更多
关键词 semi-enclosed rectangular basin coastal barrier M2 tide amphidromic point radial tidal current field
在线阅读 下载PDF
Typhoon parameter sensitivity of storm surge in the semi-enclosed Tokyo Bay 被引量:4
6
作者 Md.Rezuanul Islam Hiroshi Takagi 《Frontiers of Earth Science》 SCIE CAS CSCD 2020年第3期553-567,共15页
In this study,a storm surge model of the semi-enclosed Tokyo Bay was constructed to investigate its hydrodynamic response to major typhoon parameters,such as the point of landfall,approach angle,forward speed,size,and... In this study,a storm surge model of the semi-enclosed Tokyo Bay was constructed to investigate its hydrodynamic response to major typhoon parameters,such as the point of landfall,approach angle,forward speed,size,and intensity.The typhoon simulation was validated for Typhoon Lan in 2017,and 31 hypothetical storm surge scenarios were generated to establish the sensitivity of peak surge height to the variation in typhoon parameters.The maximum storm surge height in the upper bay adjacent to the Tokyo Metropolitan Area was found to be highly sensitive to the forward speed and size of the passing typhoon.However,the importance of these parameters in disaster risk reduction has been largely overlooked by researchers and disaster managers.It was also determined that of the many hypothetical typhoon tracks evaluated,the slow passage of a large and intense typhoon transiting parallel to the longitudinal axis of Tokyo Bay,making landfall 25 km southwest,is most likely to cause a hazardous storm surge scenario in the upper-bay area.The results of this study are expected to be useful to disaster managers for advanced preparation against destructive storm surges. 展开更多
关键词 storm surge RISK semi-enclosed bay typhoon parameters parametric study Typhoon Lan
原文传递
Hydrodynamic Simulation of the Pagasitikos Gulf, Greece
7
作者 George Bousbouras Panagiotis Angelidis 《Computational Water, Energy, and Environmental Engineering》 2024年第1期58-85,共28页
Semi-enclosed sea basins have difficulty in recharging their waters due to limited communication with larger water bodies, with understandable consequences for their environmental status. This paper aims at the comput... Semi-enclosed sea basins have difficulty in recharging their waters due to limited communication with larger water bodies, with understandable consequences for their environmental status. This paper aims at the computational simulation of the hydrodynamic characteristics of the waters of the Pagasitikos Gulf (Greece), which has limited communication and water exchange with the Aegean Sea and is subject to intense environmental pressures The Estuary, Lake & Coastal Ocean 3d hydrodynamic Model (ELCOM 2.2) combined with its later version Aquatic Ecosystem Model-3d (AEM3D) were used for the simulation. The simulation included the topography of the area, the bay’s bottom geometry, atmospheric loadings, tides, the influence of the Coriolis force and boundary conditions. The hydrodynamic behaviour of the bay, water circulation, velocities at the surface and in depth, water recharge and residence time throughout the bay, density variation and other factors were examined to determine the impact of all these on the aquatic ecosystem. 展开更多
关键词 Hydrodynamic Simulation semi-enclosed Sea Basins Pagasitikos Gulf Greece
在线阅读 下载PDF
Tide variation and signals during 2000-2004 in the northern Gulf of Aqaba, Red Sea 被引量:3
8
作者 Riyad Manasrah 《Natural Science》 2013年第12期1264-1271,共8页
Variations of tide and mean sea level (MSL) were studied during the period August 2000-March 2004 in the northern Gulf of Aqaba to detect the seasonal differences of tide records and tide components signals. The study... Variations of tide and mean sea level (MSL) were studied during the period August 2000-March 2004 in the northern Gulf of Aqaba to detect the seasonal differences of tide records and tide components signals. The study revealed seasonal cycle of the MSL in the northern Gulf, which was lower during summer than in winter due to the relative strong wind and higher evaporation during summer. The MSL during the year of 2003 Fwas the lowest comparing to the other years duing the study period which might be related to wind driven force and mixed layer depth. The statistical comparison analysis of the MSL among winters, springs and summers of the years 2000- 2004 exhibited significant difference values (p K1) and a lunar terdiurnal constituent (M3), respectively. 展开更多
关键词 SEA Level SEICHES semi-enclosed SEAS GULF of Aqaba Red SEA
在线阅读 下载PDF
Design and experiment of an upper-side-discharge straw-returning and bundle self-unloading integrated corn residual film recycling machine
9
作者 Xiaolong Liu Wuyun Zhao +5 位作者 Hua Zhang Guanping Wang Wei Sun Fei Dai Hui Li Shanglong Xin 《International Journal of Agricultural and Biological Engineering》 SCIE 2023年第5期61-70,共10页
Due to the arid climate,flat terrain,certain irrigation sources and high popularization of mechanical harvest in Hexi Irrigation Area of Gansu Province,the widely adopted half film-flat-mulching for corn cultivation f... Due to the arid climate,flat terrain,certain irrigation sources and high popularization of mechanical harvest in Hexi Irrigation Area of Gansu Province,the widely adopted half film-flat-mulching for corn cultivation faces serious adverse situations,such as high soil compactness,strong film-soil adhesion,significant straw stubble and thick covering accumulation on film.Therefore,a new kind of segmented combination upper-side-discharge straw-returning and bundle self-unloading integrated corn residual film recycling machine was proposed.The scheme was characterized by small volume,low resistance,low complexity and film-impurities twice separation.It is constructed based on the concept of module subsection combination.It was composed of film surface straw cleaning device and the followed residual film recycling machine,in terms of function,any usage requirements of separate and joint operations can be satisfied.The film surface straw cleaning device is responsible for the removal of vertical corn straw and ground covering beyond the film.Although its stubble cutter roller obtuse-angle Lshaped blades paired single-helix arrangement is simple,it runs smoothly and the straw crushing effect is good enough.The layout that upper-side-discharge straw-returning cross-range screw conveyor auger is back and beyond the stubble cutter roller,eliminates the common connecting transportation mechanism between crushing and straw-returning section,so that,the system structure can be optimized and the efficiency has been significantly improved.The integrated residual film recycling machine is composed of triangular pyramid arc two-stage wing(TPATSW)type film lifting shovel,rod-tooth-belt type film-impurities separation device and semi-enclosed shaftless bundle film collector.Among them,TPATSW type film lifting shovel has good corn root whisker cutting effect,low soil contact resistance and small soil congestion area,but its ability to lift film is strong,more importantly,the special segmented configuration of shovel handle and the body,shortens the overall machine length significantly.For semi-enclosed shaftless bundle film collector,however,a new scheme of eight sub-rolls rotate in the same direction,to roll the residual film into a bundle is innovatively adopted.Under its own parameters,the system has the lowest sub-roll rotation speed that can bundle the residual film without shaft inside the film collecting chamber,rather than on any subroll itself.The gap between the sub-rolls can separate impurities for the second time.After the film collection reaches the standard,the film collector can dump the residual film directly,which is simple and efficient.The field orthogonal test data of the prototype show that,the optimal parameter combination is:film lifting shovel earth angle is 30°,its operation depth is 50 mm and the machine forward speed is 5.0 km/h.The average residual film recycling rate and the crushed straw qualified rate under the optimal parameters are 84.9%and 90.3%respectively,which meet the requirements of the national and industrial standards.The research solved the passive situation that there was no matching equipment for the recycle of residual film in corn field in Hexi Irrigation Area effectively. 展开更多
关键词 CORN segmented combination film surface straw cleaning straw-returning TPATSW type film lifting shovel filmimpurities twice separation semi-enclosed shaftless bundle film collector self-unloading
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部