Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. On...Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. Only elastic deformations of hydraulic reciprocating seals were discussed, and hydrodynamic effects were neglected in many studies. The physical process of the fluid-solid interaction effect did not be clearly presented in the existing fluid-solid interaction models for hydraulic reciprocating O-ring seals, and few of these models had been simultaneously validated through experiments. By exploring the physical process of the fluid-solid interaction effect of the hydraulic reciprocating O-ring seal, a numerical fluid-solid interaction model consisting of fluid lubrication, contact mechanics, asperity contact and elastic deformation analyses is constructed with an iterative procedure. With the SRV friction and wear tester, the experiments are performed to investigate the elastohydrodynamic lubrication characteristics of the O-ring seal. The regularity of the friction coefficient varying with the speed of reciprocating motion is obtained in the mixed lubrication condition. The experimental result is used to validate the fluid-solid interaction model. Based on the model, The elastohydrodynamic lubrication characteristics of the hydraulic reciprocating O-ring seal are presented respectively in the dry friction, mixed lubrication and full film lubrication conditions, including of the contact pressure, film thickness, friction coefficient, liquid film pressure and viscous shear stress in the sealing zone. The proposed numerical fluid-solid interaction model can be effectively used to analyze the operation characteristics of the hydraulic reciprocating O-ring seal, and can also be widely used to study other hydraulic reciprocating seals.展开更多
The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face se...The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face seals is lacking. In particular a transient study and a difference analysis of steady-state and transient performance are imperative. In this paper, a case study is performed to gauge the effect of secondary O-ring seals on the dynamic behavior（steady-state performance and transient performance） of face seals. A numerical finite element method（FEM） model is developed for the dynamic analysis of spiral groove gas face seals with a flexibly mounted stator in the axial and angular modes. The rotor tilt angle, static stator tilt angle and O-ring damping are selected to investigate the effect of O-ring seals on face seals during stable running operation. The results show that the angular factor can be ignored to save time in the simulation under small damping or undamped conditions. However, large O-ring damping has an enormous effect on the angular phase difference of mated rings, affecting the steady-state performance of face seals and largely increasing the possibility of face contact that reduces the service life of face seals. A pressure drop fluctuation is carried out to analyze the effect of O-ring seals on the transient performance of face seals. The results show that face seals could remain stable without support stiffness and O-ring damping during normal stable operation but may enter a large-leakage state when confronting instantaneous fluctuations. The oscillation-amplitude shortening effect of O-ring damping on the axial mode is much greater than that on the angular modes and O-ring damping prefers to cater for axial motion at the cost of angular motion. This research proposes a detailed dynamic-property study of O-ring seals in spiral groove gas face seals, to assist in the design of face seals.展开更多
Experimental studies on load decay and leak rate of O-rings made of two kindsof silicone rubber are conducted. The results show that the characteristic of load decay isrelative to the material and temperature of O-rin...Experimental studies on load decay and leak rate of O-rings made of two kindsof silicone rubber are conducted. The results show that the characteristic of load decay isrelative to the material and temperature of O-rings; the rate of load decay increases with the riseof temperature; the effects of load decay on leak rate of O-rings are negligible at roomtemperature, but they are notable at high temperature, and they are related to the material ofO-rings. On the basis of study on the theory of load decay and analysis to the results ofexperiments, a theoretical model is developed to describe the load decay characteristic of O-rings,and it matches the experimental data very well. By the study of time-temperature equivalence of loaddecay, the interconvertting equation of test data of load decay at different temperatures isobtained.展开更多
Overdenture as a treatment modality for both partially and fully edentulous patients is costeffective and less expensive. The purpose of the present study was to examine the newly fabricated attachments by comparing t...Overdenture as a treatment modality for both partially and fully edentulous patients is costeffective and less expensive. The purpose of the present study was to examine the newly fabricated attachments by comparing them with conventional O-ring attachment in vitro in terms of retention force and cyclic aging resistance. A total of 150 samples were prepared and divided into five groups according to the materials used(O-ring attachment, Deflex M10 XR, Deflex Classic SR, Deflex Acrilato FD, and flexible acrylic resin). The retention force of different attachments was measured by a mini dental implant after three subsequent aging(0, 63, and 126) cycles in the circumstances similar to the oral environment. The gap space between the head of the implant and the inner surface of the attachments was detected. Two-way analysis of variance(ANOVA) analysis with multiple comparisons test was applied for statistical analysis. The results showed that Deflex M10 XR had the highest retention force and the lowest gap space after cyclic aging; in addition, by comparing the relative force reduction, the lowest values were obtained in the O-ring attachment and the highest values in the flexible acrylic resin attachment. The retention force measured after cyclic aging for the Deflex M10 XR attachment was greatly improved when compared with the O-ring attachment and other types of attachment materials; in addition, the Deflex M10 XR attachment exhibited the minimum gap space between the inner surface and the mini dental implant head. In conclusion, Deflex M10 XR has the ability to withstand weathering conditions and retains its durable and retentive properties after aging when compared with other attachments.展开更多
The O-ring in the rotary dynamic sealing system of gas meters should have outstanding long-term sealing performance under the conditions of high and low temperature,which can ensure the safety of gas meters.In this pa...The O-ring in the rotary dynamic sealing system of gas meters should have outstanding long-term sealing performance under the conditions of high and low temperature,which can ensure the safety of gas meters.In this paper,based on the O-ring sealing mechanism,taking the compression set as the main sealing index,a finite element simulation method is used to analyze the failure charac-teristics under different conditions according to the constitutive relation of nitrile rubber.Then,using the orthogonal test method for the O-ring sealing performance index,the main factors which affect the law of long-term test are analysed,and the orthogonal regression mathematical model that can predict the compression set is obtained.Finally,the O-ring is improved according to the model,and the test results show that the performance of the new O-rings with high and low temperature resistance is greatly improved and meets the expected target requirements.展开更多
In this paper the behavior of an O-ring made of NBR rubber was investigated under extreme conditions. The effect of the extreme initial compression, operating pressure and extreme temperature conditions were examined....In this paper the behavior of an O-ring made of NBR rubber was investigated under extreme conditions. The effect of the extreme initial compression, operating pressure and extreme temperature conditions were examined. The rubber material was tested in simple tension, pure shear and equibiaxial tension modes complemented with a Dynamic Mechanical Thermal Analysis (DMTA) to capture the viscoelastic behavior of the material. For the investigation, a large-strain viscoelastic material model was developed by the authors, to take into account the large deformations caused by extreme conditions. Insufficient space during installation causes extreme initial compression consequently leading the material to crack on the contacting outer surfaces. It was found that the excessive strain and friction induced shear stress contributes primarily to this phenomenon. Extreme operating pressure causes the seal to penetrate into the gap between the shaft and the housing. This behavior damages the material and cracks appear on the seal. High strain areas were found in the proximity of the gap in the material. The analysis of the extreme operating temperature showed that during cooling the O-ring can completely loose its ability to seal at -70°C. There are three contributing factors: the speed of cooling, the temperature and the coefficient of thermal expansion.展开更多
The nitrile butadiene rubber(NBR)hardness effect on the sealing characteristics of hydraulic O-ring rod seals is analyzed based on a mixed lubrication elastohydrodynamic model.Parameterized studies are conducted to re...The nitrile butadiene rubber(NBR)hardness effect on the sealing characteristics of hydraulic O-ring rod seals is analyzed based on a mixed lubrication elastohydrodynamic model.Parameterized studies are conducted to reveal the mechanism of the influence of rubber hardness on the static and dynamic behavior of seals.The optimized selections of rubber hardness are then investigated under different conditions.Results show that the low hardness seal is prone to stress concentration due to the extrusion effect under high pressure conditions;it is also more prone to leaking.A high hardness seal can better prevent leakage by reducing film thickness but it will cause large frictional power loss and increase the probability of wear failure.The choice of low hardness is recommended to reduce friction with the premise that leakage requirements are met.展开更多
To explore the damage behavior of O-ring in acid environment,a high-temperature and high-pressure(HTHP)autoclave was used to simulate the service environment of O-ring,and then 168h corrosion test of hydrogenated nitr...To explore the damage behavior of O-ring in acid environment,a high-temperature and high-pressure(HTHP)autoclave was used to simulate the service environment of O-ring,and then 168h corrosion test of hydrogenated nitrile butadiene rubber(HNBR)and fluororubber(FM)O-rings were carried out.The corrosion damage behaviors of two kinds of rubber O-rings in the acidizing fluid were studied through determining their tensile strength,elongation at break,hardness,permanent compressive deformation,tensile fracture morphology and sealing property.The results showed that the crosssectional area and the compression permanent deformation increased,the tensile strength and hardness decreased when the HNBR and FM O-rings under the free state were subjected to acid corrosion.The elongation at break of HNBR decreased,and that of FM rubber increased greatly.Similar with free state,the HNBR and FM O-rings under sealed state also presented the same variation trend.The decrease in the reliability of the O-rings under the sealed state was less significant than that in the free state.In the test,tensile fractures were mostly brittle fractures,HNBR and FM O-rings had obvious corrosion damages such as deformation and swelling.The results could provide a technical basis for the selection of sealing materials,tool optimization design,and construction work in oil and gas fields.展开更多
In the high temperature,high pressure and high corrosive environment of the oil and gas drilling downhole,the weatherability of rubber sealing material has a great influence on the production safety.In order to study ...In the high temperature,high pressure and high corrosive environment of the oil and gas drilling downhole,the weatherability of rubber sealing material has a great influence on the production safety.In order to study the important degree of every key environmental factor in downhole influencing the sealing performance of rubber sealing material,a new device of simulating downhole environment is designed to test the permeability of O-ring.The sample is hydrogenated nitrile O-ring and orthogonal experiment method is used to do nine tests by getting three levels from temperature,pressure and CO2 volume fraction.Test adopts fuzzy orthogonal method to analyze the main effects and the interaction between two factors,taking tensile strength,diameter variety rate and pH value of indicator as evaluation index.The results show that:the environmental factor influencing the sealing performance of hydrogenated nitrile O-ring from high to low by turns is temperature,pressure and CO2 volume fraction,while the interaction between temperature and pressure is the most significant.It provides a new way to study the influence of downhole complex environment on the performance of rubber sealing material.Moreover,the results have important reference value to further study the failure mechanism of rubber sealing ring in many environmental factors and the rational use in engineering.展开更多
In clinical practice, dentists sometimes encounter phenomena that cannot be explained by modern western medical concepts;for example, the patient’s medical symptoms improve by bringing medicines or dentures close to ...In clinical practice, dentists sometimes encounter phenomena that cannot be explained by modern western medical concepts;for example, the patient’s medical symptoms improve by bringing medicines or dentures close to the body. Although it seems difficult to completely elucidate the mechanism through modern western medicine, it can be explained using quantum mechanics. The quantum, the smallest unit of matter composition, exhibits wave-particle duality. The fact that symptoms can be improved simply by bringing dentures or medicines closer to the body indicates that the waves emitted by dentures or medicines interfere with the pathological waves emitted by the pathological site. Thus, the pathological waves are deformed and lead to a change in symptoms. In this way, quantum theory can explain phenomena that are difficult to elucidate in conventional medicine, which are encountered in clinical practice. So far, the author has presented a case of difficulty in raising the upper limb where the symptoms improved without the need for dentures in the mouth by adjusting the dentures outside the mouth. This time, the author would like to introduce a case which the patient’s knee pain improved by adjusting the dentures outside the mouth.展开更多
基金supported by National Basic Research Program of China(973 Program,Grant No. 2009CB724304)Key Research Program of the State Key Laboratory of Tribology of Tsinghua University,China (Grant No. SKLT08A06)National Natural Science Foundation of China(Grant No. 50975157)
文摘Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. Only elastic deformations of hydraulic reciprocating seals were discussed, and hydrodynamic effects were neglected in many studies. The physical process of the fluid-solid interaction effect did not be clearly presented in the existing fluid-solid interaction models for hydraulic reciprocating O-ring seals, and few of these models had been simultaneously validated through experiments. By exploring the physical process of the fluid-solid interaction effect of the hydraulic reciprocating O-ring seal, a numerical fluid-solid interaction model consisting of fluid lubrication, contact mechanics, asperity contact and elastic deformation analyses is constructed with an iterative procedure. With the SRV friction and wear tester, the experiments are performed to investigate the elastohydrodynamic lubrication characteristics of the O-ring seal. The regularity of the friction coefficient varying with the speed of reciprocating motion is obtained in the mixed lubrication condition. The experimental result is used to validate the fluid-solid interaction model. Based on the model, The elastohydrodynamic lubrication characteristics of the hydraulic reciprocating O-ring seal are presented respectively in the dry friction, mixed lubrication and full film lubrication conditions, including of the contact pressure, film thickness, friction coefficient, liquid film pressure and viscous shear stress in the sealing zone. The proposed numerical fluid-solid interaction model can be effectively used to analyze the operation characteristics of the hydraulic reciprocating O-ring seal, and can also be widely used to study other hydraulic reciprocating seals.
基金Supported by National Key Basic Research Program of China(973Program,Grant No.2012CB026003)National Science and Technology Major Project of China(Grant No.ZX06901)
文摘The current research on secondary O-ring seals used in mechanical seals has begun to focus on their dynamic properties. However, detailed analysis of the dynamic properties of O-ring seals in spiral groove gas face seals is lacking. In particular a transient study and a difference analysis of steady-state and transient performance are imperative. In this paper, a case study is performed to gauge the effect of secondary O-ring seals on the dynamic behavior（steady-state performance and transient performance） of face seals. A numerical finite element method（FEM） model is developed for the dynamic analysis of spiral groove gas face seals with a flexibly mounted stator in the axial and angular modes. The rotor tilt angle, static stator tilt angle and O-ring damping are selected to investigate the effect of O-ring seals on face seals during stable running operation. The results show that the angular factor can be ignored to save time in the simulation under small damping or undamped conditions. However, large O-ring damping has an enormous effect on the angular phase difference of mated rings, affecting the steady-state performance of face seals and largely increasing the possibility of face contact that reduces the service life of face seals. A pressure drop fluctuation is carried out to analyze the effect of O-ring seals on the transient performance of face seals. The results show that face seals could remain stable without support stiffness and O-ring damping during normal stable operation but may enter a large-leakage state when confronting instantaneous fluctuations. The oscillation-amplitude shortening effect of O-ring damping on the axial mode is much greater than that on the angular modes and O-ring damping prefers to cater for axial motion at the cost of angular motion. This research proposes a detailed dynamic-property study of O-ring seals in spiral groove gas face seals, to assist in the design of face seals.
基金This project is supported by 863 Program of China (No. 863-2-4-4-7).
文摘Experimental studies on load decay and leak rate of O-rings made of two kindsof silicone rubber are conducted. The results show that the characteristic of load decay isrelative to the material and temperature of O-rings; the rate of load decay increases with the riseof temperature; the effects of load decay on leak rate of O-rings are negligible at roomtemperature, but they are notable at high temperature, and they are related to the material ofO-rings. On the basis of study on the theory of load decay and analysis to the results ofexperiments, a theoretical model is developed to describe the load decay characteristic of O-rings,and it matches the experimental data very well. By the study of time-temperature equivalence of loaddecay, the interconvertting equation of test data of load decay at different temperatures isobtained.
文摘Overdenture as a treatment modality for both partially and fully edentulous patients is costeffective and less expensive. The purpose of the present study was to examine the newly fabricated attachments by comparing them with conventional O-ring attachment in vitro in terms of retention force and cyclic aging resistance. A total of 150 samples were prepared and divided into five groups according to the materials used(O-ring attachment, Deflex M10 XR, Deflex Classic SR, Deflex Acrilato FD, and flexible acrylic resin). The retention force of different attachments was measured by a mini dental implant after three subsequent aging(0, 63, and 126) cycles in the circumstances similar to the oral environment. The gap space between the head of the implant and the inner surface of the attachments was detected. Two-way analysis of variance(ANOVA) analysis with multiple comparisons test was applied for statistical analysis. The results showed that Deflex M10 XR had the highest retention force and the lowest gap space after cyclic aging; in addition, by comparing the relative force reduction, the lowest values were obtained in the O-ring attachment and the highest values in the flexible acrylic resin attachment. The retention force measured after cyclic aging for the Deflex M10 XR attachment was greatly improved when compared with the O-ring attachment and other types of attachment materials; in addition, the Deflex M10 XR attachment exhibited the minimum gap space between the inner surface and the mini dental implant head. In conclusion, Deflex M10 XR has the ability to withstand weathering conditions and retains its durable and retentive properties after aging when compared with other attachments.
基金Supported by the National Key Research and Development Program of China(No.2018YFC0808902).
文摘The O-ring in the rotary dynamic sealing system of gas meters should have outstanding long-term sealing performance under the conditions of high and low temperature,which can ensure the safety of gas meters.In this paper,based on the O-ring sealing mechanism,taking the compression set as the main sealing index,a finite element simulation method is used to analyze the failure charac-teristics under different conditions according to the constitutive relation of nitrile rubber.Then,using the orthogonal test method for the O-ring sealing performance index,the main factors which affect the law of long-term test are analysed,and the orthogonal regression mathematical model that can predict the compression set is obtained.Finally,the O-ring is improved according to the model,and the test results show that the performance of the new O-rings with high and low temperature resistance is greatly improved and meets the expected target requirements.
文摘In this paper the behavior of an O-ring made of NBR rubber was investigated under extreme conditions. The effect of the extreme initial compression, operating pressure and extreme temperature conditions were examined. The rubber material was tested in simple tension, pure shear and equibiaxial tension modes complemented with a Dynamic Mechanical Thermal Analysis (DMTA) to capture the viscoelastic behavior of the material. For the investigation, a large-strain viscoelastic material model was developed by the authors, to take into account the large deformations caused by extreme conditions. Insufficient space during installation causes extreme initial compression consequently leading the material to crack on the contacting outer surfaces. It was found that the excessive strain and friction induced shear stress contributes primarily to this phenomenon. Extreme operating pressure causes the seal to penetrate into the gap between the shaft and the housing. This behavior damages the material and cracks appear on the seal. High strain areas were found in the proximity of the gap in the material. The analysis of the extreme operating temperature showed that during cooling the O-ring can completely loose its ability to seal at -70°C. There are three contributing factors: the speed of cooling, the temperature and the coefficient of thermal expansion.
基金supported by the National Natural Science Foundation of China(No.52005470)the Natural Science Foundation of Zhejiang Province(No.LQ21E050020)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.2021YW17),China.
文摘The nitrile butadiene rubber(NBR)hardness effect on the sealing characteristics of hydraulic O-ring rod seals is analyzed based on a mixed lubrication elastohydrodynamic model.Parameterized studies are conducted to reveal the mechanism of the influence of rubber hardness on the static and dynamic behavior of seals.The optimized selections of rubber hardness are then investigated under different conditions.Results show that the low hardness seal is prone to stress concentration due to the extrusion effect under high pressure conditions;it is also more prone to leaking.A high hardness seal can better prevent leakage by reducing film thickness but it will cause large frictional power loss and increase the probability of wear failure.The choice of low hardness is recommended to reduce friction with the premise that leakage requirements are met.
基金Project supported by the National Natural Science Foundation of China“Study on the mechanism of force-chemical damage of screw sealing surface of H_(2)S/CO_(2)gas well completion string under static load,vibration and corrosion”(No.51774249)Sichuan Science and Technology Program(No.21JCQN0066).
文摘To explore the damage behavior of O-ring in acid environment,a high-temperature and high-pressure(HTHP)autoclave was used to simulate the service environment of O-ring,and then 168h corrosion test of hydrogenated nitrile butadiene rubber(HNBR)and fluororubber(FM)O-rings were carried out.The corrosion damage behaviors of two kinds of rubber O-rings in the acidizing fluid were studied through determining their tensile strength,elongation at break,hardness,permanent compressive deformation,tensile fracture morphology and sealing property.The results showed that the crosssectional area and the compression permanent deformation increased,the tensile strength and hardness decreased when the HNBR and FM O-rings under the free state were subjected to acid corrosion.The elongation at break of HNBR decreased,and that of FM rubber increased greatly.Similar with free state,the HNBR and FM O-rings under sealed state also presented the same variation trend.The decrease in the reliability of the O-rings under the sealed state was less significant than that in the free state.In the test,tensile fractures were mostly brittle fractures,HNBR and FM O-rings had obvious corrosion damages such as deformation and swelling.The results could provide a technical basis for the selection of sealing materials,tool optimization design,and construction work in oil and gas fields.
文摘In the high temperature,high pressure and high corrosive environment of the oil and gas drilling downhole,the weatherability of rubber sealing material has a great influence on the production safety.In order to study the important degree of every key environmental factor in downhole influencing the sealing performance of rubber sealing material,a new device of simulating downhole environment is designed to test the permeability of O-ring.The sample is hydrogenated nitrile O-ring and orthogonal experiment method is used to do nine tests by getting three levels from temperature,pressure and CO2 volume fraction.Test adopts fuzzy orthogonal method to analyze the main effects and the interaction between two factors,taking tensile strength,diameter variety rate and pH value of indicator as evaluation index.The results show that:the environmental factor influencing the sealing performance of hydrogenated nitrile O-ring from high to low by turns is temperature,pressure and CO2 volume fraction,while the interaction between temperature and pressure is the most significant.It provides a new way to study the influence of downhole complex environment on the performance of rubber sealing material.Moreover,the results have important reference value to further study the failure mechanism of rubber sealing ring in many environmental factors and the rational use in engineering.
文摘In clinical practice, dentists sometimes encounter phenomena that cannot be explained by modern western medical concepts;for example, the patient’s medical symptoms improve by bringing medicines or dentures close to the body. Although it seems difficult to completely elucidate the mechanism through modern western medicine, it can be explained using quantum mechanics. The quantum, the smallest unit of matter composition, exhibits wave-particle duality. The fact that symptoms can be improved simply by bringing dentures or medicines closer to the body indicates that the waves emitted by dentures or medicines interfere with the pathological waves emitted by the pathological site. Thus, the pathological waves are deformed and lead to a change in symptoms. In this way, quantum theory can explain phenomena that are difficult to elucidate in conventional medicine, which are encountered in clinical practice. So far, the author has presented a case of difficulty in raising the upper limb where the symptoms improved without the need for dentures in the mouth by adjusting the dentures outside the mouth. This time, the author would like to introduce a case which the patient’s knee pain improved by adjusting the dentures outside the mouth.
