In order to study the squeeze-strengthening effect of silicone oil-based magnetorheological fluid （MRF）, theoretical basis of disc squeezing brake was presented and a squeezing braking characteristics test-bed for M...In order to study the squeeze-strengthening effect of silicone oil-based magnetorheological fluid （MRF）, theoretical basis of disc squeezing brake was presented and a squeezing braking characteristics test-bed for MRF was designed. Moreover, relevant experiments were carded out and the relationship between squeezing pressure and braking torque was proposed. Experiments results showed that the yield stress of MRF improved linearly with the increasing of external squeezing pressure and the braking torque increased three times when external squeezing pressure achieved 2 MPa.展开更多
In this study, electrorheological （ER） behavior of suspensions prepared from 3.0 and 9.0 μm diatomite particulate, dispersed in insulating silicone oil （SO） medium was investigated. Sedimentation stabilities of s...In this study, electrorheological （ER） behavior of suspensions prepared from 3.0 and 9.0 μm diatomite particulate, dispersed in insulating silicone oil （SO） medium was investigated. Sedimentation stabilities of suspensions （c = 5 wt%） prepared using these diatomite powders were determined to be 32 days （d = 3 μm） and 24 days （d = 9 μm）, respectively. ER activity of all the suspensions was observed to increase with increasing electric field strength, concentration and decreasing shear rate. Shear stress of diatomite suspensions increased linearly with increasing concentrations of the particles and with the applied electric field strength. Electric field viscosity of all the suspensions decreased sharply with increasing shear rate and particle size, showing a typical shear thinning non-Newtonian visco-elastic behavior. Effects of high temperature and polar promoter onto ER activity ofdiatomite/SO system were also investigated.展开更多
In this study, the electrorheological （ER） behavior of suspensions prepared from d50 = 2.4 lam talc powder, dispersed in insulating silicone oil （SO） medium was investigated. Sedimentation stabilities of suspensio...In this study, the electrorheological （ER） behavior of suspensions prepared from d50 = 2.4 lam talc powder, dispersed in insulating silicone oil （SO） medium was investigated. Sedimentation stabilities of suspensions （c = 5 wt%） prepared using these talc powder powders were determined to be 78 days. The ER activity of all the suspensions was observed to increase with increasing electric field strength, concentration and decreasing shear rate. The shear stress of talc powder suspensions increased linearly with increasing concentrations of the particles and with the applied electric field strength. Electric field viscosity of all the suspensions decreased sharply with increasing shear rate and showed a typical shear thinning non-Newtonian visco-elastic behavior. Effects of frequency on the ER activity of talc powder/SO system were also investigated.展开更多
Silicon is the material most commonly used in the manufacturing of photovoltaic (PV) cells. In the current study, laboratory experiments of purification of solar cell silicon materials through filtration are carried o...Silicon is the material most commonly used in the manufacturing of photovoltaic (PV) cells. In the current study, laboratory experiments of purification of solar cell silicon materials through filtration are carried out. Inclusion removal from silicon was investigated. The purpose is to achieve clean silicon materials for solar cells. Silicon samples and filter samples were analyzed using microscope observation, EPMA, and X-ray detection. Silicon nitride (Si3N4) and silicon carbide (SiC) particles are the main non-metallic inclusions present in top-cut silicon scrap. Almost all inclusions larger than 10 μm can be removed from silicon by the porous foam filter. In mass fraction, more than 90% inclusions are removed. Si3N4 particles are mainly removed on the top surface of the filter, and SiC particles are mainly removed by entering the pores and attaching to the filter material. SiC inclusions are not only simply attached on the surface of the filter material, but are found also inside the filter material. There are SiC bridges near the filter materials. These bridges may fill the spaces between filter material, and this will further retard inclusions passing through the filter. Three-dimensional turbulent fluid flow and inclusion motion in the filter was calculated. Both experimental observation and fluid flow simulation indicate that most of the inclusions are entrapped at the upper part of the filter.展开更多
This research discusses the separation of methane gas from three different gas mixtures,CH4/H2 S,CH4/N2 and CH4/CO2,using a modified silicon carbide nanosheet(Si CNS)membrane using both molecular dynamics(MD)and compu...This research discusses the separation of methane gas from three different gas mixtures,CH4/H2 S,CH4/N2 and CH4/CO2,using a modified silicon carbide nanosheet(Si CNS)membrane using both molecular dynamics(MD)and computational fluid dynamics(CFD)methods.The research examines the effects of different structures of the Si CNSs on the separation of these gas mixtures.Various parameters including the potential of the mean force,separation factor,permeation rate,selectivity and diffusivity are discussed in detail.Our MD simulations showed that the separation of CH4/H2 S,and CH4/CO2 mixtures was successful,while simulation demonstrated a poor result for the CH4/N2 mixture.The effect of temperature on the diffusivity of gas is also discussed,and a correlation is introduced for diffusivity as a function of temperature.The evaluated value for diffusivity is then used in the CFD method to investigate the permeation rate of gas mixtures.展开更多
A mechanism of oxygen transportation in Czochralski growth of silicon crystals under a horizontal magnetic field (HMCZ) is proposed. Oxygen depleted surface melt, driven to the growth interface by the thermal Marangon...A mechanism of oxygen transportation in Czochralski growth of silicon crystals under a horizontal magnetic field (HMCZ) is proposed. Oxygen depleted surface melt, driven to the growth interface by the thermal Marangoni flow, determines oxygen concentration in the grown crystals. Systematic study was carried out to investigate effects of growth parameters on oxygen incorporation into crystals.展开更多
Non-metallic particles and metallic impurities present in the feedstock affect the electrical and mechanical properties of high quality silicon which is used in critical applications such as photovoltaic solar cells a...Non-metallic particles and metallic impurities present in the feedstock affect the electrical and mechanical properties of high quality silicon which is used in critical applications such as photovoltaic solar cells and electronic devices. SiC particles strongly deteriorate the mechanical properties of photovoltaic cells and cause shunting problem. Therefore, these particles should be removed from silicon before solar cells are fabricated from this material. Separation of non-metallic particles from liquid metals by imposing an electromagnetic field was identified as an enhanced technology to produce ultra pure metals. Application of this method for removal of SiC particles from metallurgical grade silicon （MG-Si） was presented. Numerical methods based on a combination of classical models for inclusion removal and computational fluid dynamics （CFD） were developed to calculate the particle concentration and separation efficiency from the melt. In order to check efficiency of the method, several experiments were done using an induction furnace. The experimental results show that this method can be effectively applied to purifying silicon melts from the non-metallic inclusions. The results are in a good agreement with the predictions made by the model.展开更多
针对气田钻井液发泡问题,从钻井液发泡原因和消泡机理出发,在综合考察现今国内外各种消泡体系的基础之上,研制了一种以有机硅为主体的乳液型消泡剂LS。通过L16正交实验确定了影响消泡剂LS产品性能的条件,得出各因素对反应的影响次序为:...针对气田钻井液发泡问题,从钻井液发泡原因和消泡机理出发,在综合考察现今国内外各种消泡体系的基础之上,研制了一种以有机硅为主体的乳液型消泡剂LS。通过L16正交实验确定了影响消泡剂LS产品性能的条件,得出各因素对反应的影响次序为:有机硅质量分数>乳化温度>乳化剂质量分数>乳化时间;优化的合成条件为:有机硅质量分数15%,乳化剂质量分数5%,乳化温度80℃,乳化时间20 m in。通过性能评价实验,证明该消泡剂具有用量少(质量分数为0.2%)、消泡效果好(密度恢复率为98.96%)、抑泡能力强(抑泡密度恢复率为99.13%)、无毒无污染等优点,作为一种高效环保型的钻井液消泡剂,具有广阔的发展应用前景。LS已工业化生产,现场应用效果良好。展开更多
基金Funded by National Natural Science Foundation of China(No.51475454)National Natural Science Foundation of JiangsuProvince(No.BK20151144)+1 种基金Fundamental Research Funds forthe Central Universities(No.2014QNA38)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘In order to study the squeeze-strengthening effect of silicone oil-based magnetorheological fluid （MRF）, theoretical basis of disc squeezing brake was presented and a squeezing braking characteristics test-bed for MRF was designed. Moreover, relevant experiments were carded out and the relationship between squeezing pressure and braking torque was proposed. Experiments results showed that the yield stress of MRF improved linearly with the increasing of external squeezing pressure and the braking torque increased three times when external squeezing pressure achieved 2 MPa.
文摘In this study, electrorheological （ER） behavior of suspensions prepared from 3.0 and 9.0 μm diatomite particulate, dispersed in insulating silicone oil （SO） medium was investigated. Sedimentation stabilities of suspensions （c = 5 wt%） prepared using these diatomite powders were determined to be 32 days （d = 3 μm） and 24 days （d = 9 μm）, respectively. ER activity of all the suspensions was observed to increase with increasing electric field strength, concentration and decreasing shear rate. Shear stress of diatomite suspensions increased linearly with increasing concentrations of the particles and with the applied electric field strength. Electric field viscosity of all the suspensions decreased sharply with increasing shear rate and particle size, showing a typical shear thinning non-Newtonian visco-elastic behavior. Effects of high temperature and polar promoter onto ER activity ofdiatomite/SO system were also investigated.
基金This work was supported by the Omya Mining Co of Istanbul and Harran University.
文摘In this study, the electrorheological （ER） behavior of suspensions prepared from d50 = 2.4 lam talc powder, dispersed in insulating silicone oil （SO） medium was investigated. Sedimentation stabilities of suspensions （c = 5 wt%） prepared using these talc powder powders were determined to be 78 days. The ER activity of all the suspensions was observed to increase with increasing electric field strength, concentration and decreasing shear rate. The shear stress of talc powder suspensions increased linearly with increasing concentrations of the particles and with the applied electric field strength. Electric field viscosity of all the suspensions decreased sharply with increasing shear rate and showed a typical shear thinning non-Newtonian visco-elastic behavior. Effects of frequency on the ER activity of talc powder/SO system were also investigated.
文摘Silicon is the material most commonly used in the manufacturing of photovoltaic (PV) cells. In the current study, laboratory experiments of purification of solar cell silicon materials through filtration are carried out. Inclusion removal from silicon was investigated. The purpose is to achieve clean silicon materials for solar cells. Silicon samples and filter samples were analyzed using microscope observation, EPMA, and X-ray detection. Silicon nitride (Si3N4) and silicon carbide (SiC) particles are the main non-metallic inclusions present in top-cut silicon scrap. Almost all inclusions larger than 10 μm can be removed from silicon by the porous foam filter. In mass fraction, more than 90% inclusions are removed. Si3N4 particles are mainly removed on the top surface of the filter, and SiC particles are mainly removed by entering the pores and attaching to the filter material. SiC inclusions are not only simply attached on the surface of the filter material, but are found also inside the filter material. There are SiC bridges near the filter materials. These bridges may fill the spaces between filter material, and this will further retard inclusions passing through the filter. Three-dimensional turbulent fluid flow and inclusion motion in the filter was calculated. Both experimental observation and fluid flow simulation indicate that most of the inclusions are entrapped at the upper part of the filter.
文摘This research discusses the separation of methane gas from three different gas mixtures,CH4/H2 S,CH4/N2 and CH4/CO2,using a modified silicon carbide nanosheet(Si CNS)membrane using both molecular dynamics(MD)and computational fluid dynamics(CFD)methods.The research examines the effects of different structures of the Si CNSs on the separation of these gas mixtures.Various parameters including the potential of the mean force,separation factor,permeation rate,selectivity and diffusivity are discussed in detail.Our MD simulations showed that the separation of CH4/H2 S,and CH4/CO2 mixtures was successful,while simulation demonstrated a poor result for the CH4/N2 mixture.The effect of temperature on the diffusivity of gas is also discussed,and a correlation is introduced for diffusivity as a function of temperature.The evaluated value for diffusivity is then used in the CFD method to investigate the permeation rate of gas mixtures.
文摘A mechanism of oxygen transportation in Czochralski growth of silicon crystals under a horizontal magnetic field (HMCZ) is proposed. Oxygen depleted surface melt, driven to the growth interface by the thermal Marangoni flow, determines oxygen concentration in the grown crystals. Systematic study was carried out to investigate effects of growth parameters on oxygen incorporation into crystals.
文摘Non-metallic particles and metallic impurities present in the feedstock affect the electrical and mechanical properties of high quality silicon which is used in critical applications such as photovoltaic solar cells and electronic devices. SiC particles strongly deteriorate the mechanical properties of photovoltaic cells and cause shunting problem. Therefore, these particles should be removed from silicon before solar cells are fabricated from this material. Separation of non-metallic particles from liquid metals by imposing an electromagnetic field was identified as an enhanced technology to produce ultra pure metals. Application of this method for removal of SiC particles from metallurgical grade silicon （MG-Si） was presented. Numerical methods based on a combination of classical models for inclusion removal and computational fluid dynamics （CFD） were developed to calculate the particle concentration and separation efficiency from the melt. In order to check efficiency of the method, several experiments were done using an induction furnace. The experimental results show that this method can be effectively applied to purifying silicon melts from the non-metallic inclusions. The results are in a good agreement with the predictions made by the model.
文摘针对气田钻井液发泡问题,从钻井液发泡原因和消泡机理出发,在综合考察现今国内外各种消泡体系的基础之上,研制了一种以有机硅为主体的乳液型消泡剂LS。通过L16正交实验确定了影响消泡剂LS产品性能的条件,得出各因素对反应的影响次序为:有机硅质量分数>乳化温度>乳化剂质量分数>乳化时间;优化的合成条件为:有机硅质量分数15%,乳化剂质量分数5%,乳化温度80℃,乳化时间20 m in。通过性能评价实验,证明该消泡剂具有用量少(质量分数为0.2%)、消泡效果好(密度恢复率为98.96%)、抑泡能力强(抑泡密度恢复率为99.13%)、无毒无污染等优点,作为一种高效环保型的钻井液消泡剂,具有广阔的发展应用前景。LS已工业化生产,现场应用效果良好。
