Removing H_(2)S and CO_(2)is of great significance for natural gas purification.With excellent gas affinity and tunable structure,ionic liquids(ILs) have been regarded as nontrivial candidates for fabricating polymer-...Removing H_(2)S and CO_(2)is of great significance for natural gas purification.With excellent gas affinity and tunable structure,ionic liquids(ILs) have been regarded as nontrivial candidates for fabricating polymer-based membranes.Herein,we firstly reported the incorporation of protic ILs (PILs) having ether-rich and carboxylate sites (ECPILs) into poly(ether-block-amide)(Pebax) matrix for efficient separation H_(2)S and CO_(2)from CH_(4).Notably,the optimal permeability of H_(2)S reaches up to 4310 Barrer (40C,0.50 bar) in Pebax/ECPIL membranes,along with H_(2)S/CH_(4)and (H_(2)StCO_(2))/CH_(4)selectivity of 97.7 and 112.3,respectively.These values are increased by 1125%,160.8%and 145.9%compared to those in neat Pebax membrane.Additionally,the solubility and diffusion coefficients of the gases were measured,demonstrating that ECPIL can simultaneously strengthen the dissolution and diffusion of H_(2)S and CO_(2),thus elevating the permeability and permselectivity.By using quantum chemical calculations and FT-IR spectroscopy,the highly reversible multi-site hydrogen bonding interaction between ECPILs and H_(2)S was revealed,which is responsible for the fast permeation of H_(2)S and good selectivity.Furthermore,H_(2)S/CO_(2)/CH_(4)(3/3/94 mol/mol) ternary mixed gas can be efficiently and stably separated by Pebax/ECPIL membrane for at least 100 h.Overall,this work not only illustrates that PILs with ether-rich and carboxylate hydrogen bonding sites are outstanding materials for simultaneous removal of H_(2)S and CO_(2),but may also provide a novel insight into the design of membrane materials for natural gas upgrading.展开更多
Green hydrogen is urgently required for sustainable development of human beings and rational construction of heterostructures holds great promising for photocatalytic hydrogen generation.Herein,2D/2D WSe_(2)/ZnIn_(2)S...Green hydrogen is urgently required for sustainable development of human beings and rational construction of heterostructures holds great promising for photocatalytic hydrogen generation.Herein,2D/2D WSe_(2)/ZnIn_(2)S_(4) heterostructures with strong hetero-interface interaction and abundant contact were constructed via an impregnation-annealing strategy.Efficient charge transfer from ZnIn_(2)S_(4) to WSe_(2)was evidenced by transient absorption spectroscopy in crafted heterostructures owing to the tight and2D face-to-face contact.As a result,the prepared WSe_(2)/ZnIn_(2)S_(4) heterostructures exhibited boosted photocatalytic performance and a highest hydrogen evolution rate of 3.377 mmol/(g h)was achieved with an apparent quantum yield of 45.7%at 420 nm.The work not only provides new strategies to achieve efficient 2D/2D heterostructures but also paves the way for the development of green hydrogen in the future.展开更多
Numerous decision-makers in politics,science,and business worldwide have acknowledged that hydrogen H_(2) will become one of the most important energy sources of the 21st century if the desired energy transition to ca...Numerous decision-makers in politics,science,and business worldwide have acknowledged that hydrogen H_(2) will become one of the most important energy sources of the 21st century if the desired energy transition to carbon-free energy sources is to be taken seriously.Nevertheless,this transition in general and the introduction of H_(2) in particular is still progressing far too slowly.There are now countless projects worldwide,including several worth billions of US dollars,but we are still waiting for the breakthrough.There seem to be various reasons for this,not just one single or most important one.Purpose:In the overall context of global earth overheating(often downplayed as“climate change”),hydrogen H_(2) will undoubtedly play a decisive role as of now.The paper aims to identify the key challenges and propose solutions for establishing a sustainable value chain for market penetration of H_(2).Design/methodology/approach:This paper aims to shed light on the current situation using freely accessible publications from global management consultancies and the German government,as well as critical reporting.The problem of human behavior is also explained by the Novak Triangle.Findings:Most people have come to understand that anthropogenic global overheating can only be solved by new technologies(which cost money,time,and behavioral change)in production and application.Hydrogen H_(2) appears to be an essential part of the desired solution.Nevertheless,there are currently still numerous challenges and also concrete concerns worldwide,which partially cast the implementation in a questionable light.The findings suggest that establishing a demand and supply of H_(2) needs a comprehensive infrastructure,circular economy principles,and changes in consumer behavior and policy frameworks.The paper proposes solutions for addressing these challenges.Affected countries:The situation described here relates to Germany and the EU countries,but it is likely to be comparable,or at least similar,for many industrialized countries.The challenges and solutions proposed in this paper are relevant to countries worldwide that are transitioning to sustainable energy and transportation systems.Research/future/practical implications:As of 2024,it must be stated that the implementation of H_(2) is still progressing far too slowly,even in the“model country”Germany.There are still problems and stalling in many places.The biggest challenge seems to be the problem:without demand,there is no supply;without supply,there is no demand.This can then best be achieved with simple“out-of-the-box”solutions in mindset(see Novak triangle).The research implications of this paper include the need for further research on the challenges of establishing a sustainable value chain and the effectiveness of the proposed solutions.The future implications of this paper include the importance of establishing a sustainable value chain to mitigate climate change and reduce dependence on fossil fuels.The core point will become the collaboration across the entire value chain to establish a sustainable infrastructure for sustainable energy and transportation systems.Originality/value:Currently,there are virtually no scientific books that would present the overall context of the challenges.Therefore,only current surveys,market volumes,and challenges in environmental and working conditions can be described here.This paper contributes to the literature by analyzing the challenges of establishing a market model for hydrogen H_(2).The paper proposes solutions for addressing these challenges and shows difficulties.It provides valuable insights for policymakers,industry stakeholders,and researchers working towards a sustainable energy future.展开更多
The effects of chloride salts(NaCl,MgCl2and NH4Cl)on the hydrolysis kinetics of MgH2prepared by hydridingcombustion synthesis and mechanical milling(HCS+MM)were discussed.X-ray diffraction(XRD)analyses show that high-...The effects of chloride salts(NaCl,MgCl2and NH4Cl)on the hydrolysis kinetics of MgH2prepared by hydridingcombustion synthesis and mechanical milling(HCS+MM)were discussed.X-ray diffraction(XRD)analyses show that high-purityMgH2was successfully prepared by HCS.Hydrolysis performance test results indicate that the chloride salt added during the millingprocess is favorable to the initial reaction rate and hydrogen generation yield within60min.A MgH2?10%NH4Cl composite exhibitsthe best performance with the hydrogen generation yield of1311mL/g and a conversion rate of85.69%in60min at roomtemperature.It is suggested that the chloride salts not only play as grinding aids in the milling process,but also create fresh surface ofreactive materials,favoring the hydrolysis reaction.展开更多
In this work,La-doped Mg-Ni multiphase alloys were prepared by resistance melting furnace(RMF)and then modified by high-energy ball milling(HEBM).The hydrolysis H_(2) generation kinetics/thermodynamics of prepared all...In this work,La-doped Mg-Ni multiphase alloys were prepared by resistance melting furnace(RMF)and then modified by high-energy ball milling(HEBM).The hydrolysis H_(2) generation kinetics/thermodynamics of prepared alloys in Na Cl solutions have been investigated with the help of nonlinear and linear fitting by Avrami-Erofeev and Arrhenius equations.Combining the microstructure information before and after hydrolysis and thermodynamics fitting results,the hydrolysis H_(2) generation mechanism based on nucleation&growth has been elaborated.The final H_(2) generation capacities of 0La,5La,10La and 15 La alloys are 677,653,641 and 770 m L·g^(-1)H_(2) in 240 min at291 K,respectively.While,the final H_(2) generation capacities of HEBM 0La,5La,10La and 15 La alloys are 632,824,611 and 653 m L·g^(-1)H_(2) in 20 min at 291 K,respectively.The as-cast 15La alloy and HEMB 5La alloy present the best H_(2) production rates and final H_(2) production capacities,especially the HEBM 5La can rapidly achieve high H_(2) generation capacity(670 and 824 m L·g^(-1)H_(2) )at low temperature(291 K)within short time(5 and 20 min).The difference between the H_(2) generation capacities is mainly originated from the initial nucleation rate of Mg(OH)_(2) and the subsequent processes affected by the microstructures and phase compositions of the hydrolysis alloys.Relative low initial nucleation rate and fully growth of Mg(OH)_(2) nucleus are the premise of high H_(2) generation capacity due to the hydrolysis H_(2) generation process consisted by the nucleation,growth and contacting of Mg(OH)_(2) nucleus.To utilization H_(2) by designing solid state H_(2) generators using optimized Mg-based alloys is expected to be a feasible H_(2) generation strategy at the moment.展开更多
The hydrolysis of MgH_(2) delivers high hydrogen capacity(15.2 wt%),which is very attractive for real-time hydrogen supply.However,the formation of a surface passivation Mg(OH)_(2) layer and the large excess of H_(2)O...The hydrolysis of MgH_(2) delivers high hydrogen capacity(15.2 wt%),which is very attractive for real-time hydrogen supply.However,the formation of a surface passivation Mg(OH)_(2) layer and the large excess of H_(2)O required to ensure complete hydrolysis are two key challenges for the MgH_(2) hydrolysis systems.Now,a low-cost method is reported to synthesize MgH_(2)@Mg(BH_(4))_(2) composite via ball-milling MgH_(2) with cheap and widely available B_(2)O_(3)(or B(OH)_(3)).By adding small amounts of B_(2)O_(3),the in-situ formed Mg(BH_(4))_(2) could significantly promote the hydrolysis of MgH_(2).In particular,the MgH_(2)–10 wt%B_(2)O_(3) composite releases 1330.7 mL·g^(−1) H_(2)(close to 80%theoretical hydrogen generation H_(2))in H_(2)O and 1520.4 mL·g^(−1) H_(2)(about 95%)in 0.5 M MgCl_(2) in 60 min at 26℃ with hydrolysis rate of 736.9 mL·g^(−1)·min^(−1) and 960.9 mL·g^(−1)·min^(−1) H_(2) during the first minute of the hydrolysis,respectively.In addition,the MgCl_(2) solution allows repeated use by filtering and exhibits high cycle stability(20 cycles),therefore leading to much reduced capacity loss caused by the excess H_(2)O.We show that by introducing B_(2)O_(3) and recycling the 0.5 M MgCl_(2) solution,the system hydrogen capacity can approach 5.9 wt%,providing a promising hydrogen generation scheme to supply hydrogen to the fuel cells.展开更多
Herein, we report visible light active mesoporous cadmium bismuth niobate（CBN） nanospheres as a photocatalyst for hydrogen（H） generation from copious hydrogen sulfide（HS）. CBN has been synthesized by solid state...Herein, we report visible light active mesoporous cadmium bismuth niobate（CBN） nanospheres as a photocatalyst for hydrogen（H） generation from copious hydrogen sulfide（HS）. CBN has been synthesized by solid state reaction（SSR） and also using combustion method（CM） at relatively lower temperatures.The as-synthesized materials were characterized using different techniques. X-ray diffraction analysis shows the formation of single phase orthorhombic CBN. Field emission scanning electron microscopy and high resolution-transmission electron microscopy showed the particle size in the range of.5–1 μm for CBN obtained by SSR and 50–70 nm size nanospheres using CM, respectively. Interestingly, nanospheres of size 50–70 nm self assembled with 5–7 nm nanoparticles were observed in case of CBN prepared by CM.The optical properties were studied using UV–visible diffuse reflectance spectroscopy and showed band gap around.0 eV for SSR and 3.1 eV for CM. The slight shift in band gap of CM is due to nanocrystalline nature of material. Considering the band gap in visible region, the photocatalytic activity of CBN for hydrogen production from HS has been performed under visible light. CBN prepared by CM has shown utmost hydrogen evolution i.e. 6912 μmol/h/0.5 g which is much higher than CBN prepared using SSR.The enhanced photocatalytic property can be attributed to the smaller particle size, crystalline nature,high surface area and mesoporous structure of CBN prepared by combustion method. The catalyst was found to be stable, active and can be utilized for water splitting.展开更多
Noble metal palladium(Pd)is well‐known as excellent photocatalytic cocatalyst,but its strong adsorption to hydrogen causes its limited H2‐evolution activity.In this study,the transition metal Cu was successfully int...Noble metal palladium(Pd)is well‐known as excellent photocatalytic cocatalyst,but its strong adsorption to hydrogen causes its limited H2‐evolution activity.In this study,the transition metal Cu was successfully introduced into the metallic Pd to weaken its hydrogen‐adsorption strength to improve its interfacial H_(2)‐evolution rate via the Pd‐Cu alloying effect.Herein,the ultrasmall Pd_(100−x)Cu_(x) alloy nanodots(2−5 nm)as a novel H_(2)‐evolution cocatalyst were integrated with the TiO_(2) through a simple NaH_(2)PO_(2)‐mediated co‐deposition route.The resulting Pd_(100−x)Cu_(x)/TiO_(2) sample shows the significantly enhanced photocatalytic H_(2)‐generation performance(269.2μmol h^(−1)),which is much higher than the bare TiO2.Based on in situ irradiated X‐ray photoelectron spectroscopy(ISI‐XPS)and density functional theory(DFT)results,the as‐formed Pd_(100−x)Cu_(x) alloy nanodots can effectively promote the separation of photo‐generated charges and weak the adsorption strength for hydrogen to optimize the process of hydrogen‐desorption process on Pd_(75)Cu_(25) alloy,thus leading to high photocatalytic H_(2)‐evolution activity.Herein,the weakened H adsorption of Pd_(75)Cu_(25) cocatalyst can be ascribed to the formation of electron‐rich Pd after the introduction of weak electronegativity Cu.The present work about optimizing electronic structure for promoting interfacial reaction activity provides a new sight for the development of the highly efficient photocatalysts.展开更多
基金sponsored by the National Natural Science Foundation of China (Nos. 22308145, 22208140, 22178159, 22078145)Natural Science Foundation of Jiangsu Province (BK20230791)Postgraduate Research Innovation Program of Jiangsu Province (KYCX24_0165)。
文摘Removing H_(2)S and CO_(2)is of great significance for natural gas purification.With excellent gas affinity and tunable structure,ionic liquids(ILs) have been regarded as nontrivial candidates for fabricating polymer-based membranes.Herein,we firstly reported the incorporation of protic ILs (PILs) having ether-rich and carboxylate sites (ECPILs) into poly(ether-block-amide)(Pebax) matrix for efficient separation H_(2)S and CO_(2)from CH_(4).Notably,the optimal permeability of H_(2)S reaches up to 4310 Barrer (40C,0.50 bar) in Pebax/ECPIL membranes,along with H_(2)S/CH_(4)and (H_(2)StCO_(2))/CH_(4)selectivity of 97.7 and 112.3,respectively.These values are increased by 1125%,160.8%and 145.9%compared to those in neat Pebax membrane.Additionally,the solubility and diffusion coefficients of the gases were measured,demonstrating that ECPIL can simultaneously strengthen the dissolution and diffusion of H_(2)S and CO_(2),thus elevating the permeability and permselectivity.By using quantum chemical calculations and FT-IR spectroscopy,the highly reversible multi-site hydrogen bonding interaction between ECPILs and H_(2)S was revealed,which is responsible for the fast permeation of H_(2)S and good selectivity.Furthermore,H_(2)S/CO_(2)/CH_(4)(3/3/94 mol/mol) ternary mixed gas can be efficiently and stably separated by Pebax/ECPIL membrane for at least 100 h.Overall,this work not only illustrates that PILs with ether-rich and carboxylate hydrogen bonding sites are outstanding materials for simultaneous removal of H_(2)S and CO_(2),but may also provide a novel insight into the design of membrane materials for natural gas upgrading.
基金financially supported by the National Natural Science Foundation of China (No.52106259)the Fundamental Research Funds for the Central Universities (2024MS013)Key Research and Development Program of Shaanxi (Program No.2022LL-JB-08)。
文摘Green hydrogen is urgently required for sustainable development of human beings and rational construction of heterostructures holds great promising for photocatalytic hydrogen generation.Herein,2D/2D WSe_(2)/ZnIn_(2)S_(4) heterostructures with strong hetero-interface interaction and abundant contact were constructed via an impregnation-annealing strategy.Efficient charge transfer from ZnIn_(2)S_(4) to WSe_(2)was evidenced by transient absorption spectroscopy in crafted heterostructures owing to the tight and2D face-to-face contact.As a result,the prepared WSe_(2)/ZnIn_(2)S_(4) heterostructures exhibited boosted photocatalytic performance and a highest hydrogen evolution rate of 3.377 mmol/(g h)was achieved with an apparent quantum yield of 45.7%at 420 nm.The work not only provides new strategies to achieve efficient 2D/2D heterostructures but also paves the way for the development of green hydrogen in the future.
文摘Numerous decision-makers in politics,science,and business worldwide have acknowledged that hydrogen H_(2) will become one of the most important energy sources of the 21st century if the desired energy transition to carbon-free energy sources is to be taken seriously.Nevertheless,this transition in general and the introduction of H_(2) in particular is still progressing far too slowly.There are now countless projects worldwide,including several worth billions of US dollars,but we are still waiting for the breakthrough.There seem to be various reasons for this,not just one single or most important one.Purpose:In the overall context of global earth overheating(often downplayed as“climate change”),hydrogen H_(2) will undoubtedly play a decisive role as of now.The paper aims to identify the key challenges and propose solutions for establishing a sustainable value chain for market penetration of H_(2).Design/methodology/approach:This paper aims to shed light on the current situation using freely accessible publications from global management consultancies and the German government,as well as critical reporting.The problem of human behavior is also explained by the Novak Triangle.Findings:Most people have come to understand that anthropogenic global overheating can only be solved by new technologies(which cost money,time,and behavioral change)in production and application.Hydrogen H_(2) appears to be an essential part of the desired solution.Nevertheless,there are currently still numerous challenges and also concrete concerns worldwide,which partially cast the implementation in a questionable light.The findings suggest that establishing a demand and supply of H_(2) needs a comprehensive infrastructure,circular economy principles,and changes in consumer behavior and policy frameworks.The paper proposes solutions for addressing these challenges.Affected countries:The situation described here relates to Germany and the EU countries,but it is likely to be comparable,or at least similar,for many industrialized countries.The challenges and solutions proposed in this paper are relevant to countries worldwide that are transitioning to sustainable energy and transportation systems.Research/future/practical implications:As of 2024,it must be stated that the implementation of H_(2) is still progressing far too slowly,even in the“model country”Germany.There are still problems and stalling in many places.The biggest challenge seems to be the problem:without demand,there is no supply;without supply,there is no demand.This can then best be achieved with simple“out-of-the-box”solutions in mindset(see Novak triangle).The research implications of this paper include the need for further research on the challenges of establishing a sustainable value chain and the effectiveness of the proposed solutions.The future implications of this paper include the importance of establishing a sustainable value chain to mitigate climate change and reduce dependence on fossil fuels.The core point will become the collaboration across the entire value chain to establish a sustainable infrastructure for sustainable energy and transportation systems.Originality/value:Currently,there are virtually no scientific books that would present the overall context of the challenges.Therefore,only current surveys,market volumes,and challenges in environmental and working conditions can be described here.This paper contributes to the literature by analyzing the challenges of establishing a market model for hydrogen H_(2).The paper proposes solutions for addressing these challenges and shows difficulties.It provides valuable insights for policymakers,industry stakeholders,and researchers working towards a sustainable energy future.
基金Projects(51571112,51171079,51471087) supported by the National Natural Science Foundation of ChinaProject(13KJA430003) supported by Jiangsu Higher Education Institutions of China+1 种基金Project supported by Qing Lan Project,ChinaProject supported by the Priority Academic Program Development(PAPD) of Jiangsu Higher Education Institutions,China
文摘The effects of chloride salts(NaCl,MgCl2and NH4Cl)on the hydrolysis kinetics of MgH2prepared by hydridingcombustion synthesis and mechanical milling(HCS+MM)were discussed.X-ray diffraction(XRD)analyses show that high-purityMgH2was successfully prepared by HCS.Hydrolysis performance test results indicate that the chloride salt added during the millingprocess is favorable to the initial reaction rate and hydrogen generation yield within60min.A MgH2?10%NH4Cl composite exhibitsthe best performance with the hydrogen generation yield of1311mL/g and a conversion rate of85.69%in60min at roomtemperature.It is suggested that the chloride salts not only play as grinding aids in the milling process,but also create fresh surface ofreactive materials,favoring the hydrolysis reaction.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51704188,51702199,61705125,51802181)the State Key Laboratory of Solidification Processing in NWPU(Grant No.SKLSP201809)+2 种基金Natural Science Foundation of Shaanxi Province(Grant No.2019JQ-099)Research Starting Foundation from Shaanxi University of Science and Technology(Grant No.2016GBJ-04)the financial support of China Scholarship Council(Grant No.201808610089)。
文摘In this work,La-doped Mg-Ni multiphase alloys were prepared by resistance melting furnace(RMF)and then modified by high-energy ball milling(HEBM).The hydrolysis H_(2) generation kinetics/thermodynamics of prepared alloys in Na Cl solutions have been investigated with the help of nonlinear and linear fitting by Avrami-Erofeev and Arrhenius equations.Combining the microstructure information before and after hydrolysis and thermodynamics fitting results,the hydrolysis H_(2) generation mechanism based on nucleation&growth has been elaborated.The final H_(2) generation capacities of 0La,5La,10La and 15 La alloys are 677,653,641 and 770 m L·g^(-1)H_(2) in 240 min at291 K,respectively.While,the final H_(2) generation capacities of HEBM 0La,5La,10La and 15 La alloys are 632,824,611 and 653 m L·g^(-1)H_(2) in 20 min at 291 K,respectively.The as-cast 15La alloy and HEMB 5La alloy present the best H_(2) production rates and final H_(2) production capacities,especially the HEBM 5La can rapidly achieve high H_(2) generation capacity(670 and 824 m L·g^(-1)H_(2) )at low temperature(291 K)within short time(5 and 20 min).The difference between the H_(2) generation capacities is mainly originated from the initial nucleation rate of Mg(OH)_(2) and the subsequent processes affected by the microstructures and phase compositions of the hydrolysis alloys.Relative low initial nucleation rate and fully growth of Mg(OH)_(2) nucleus are the premise of high H_(2) generation capacity due to the hydrolysis H_(2) generation process consisted by the nucleation,growth and contacting of Mg(OH)_(2) nucleus.To utilization H_(2) by designing solid state H_(2) generators using optimized Mg-based alloys is expected to be a feasible H_(2) generation strategy at the moment.
基金supported by the Basic and Applied Basic Research Foundation of Guangdong Province(No.2022A1515011832 and 2021A1515110676)supported by GDAS’Project of Science and Technology Development(2022GDASZH-2022010104,2022GDASZH-2022030604-04).
文摘The hydrolysis of MgH_(2) delivers high hydrogen capacity(15.2 wt%),which is very attractive for real-time hydrogen supply.However,the formation of a surface passivation Mg(OH)_(2) layer and the large excess of H_(2)O required to ensure complete hydrolysis are two key challenges for the MgH_(2) hydrolysis systems.Now,a low-cost method is reported to synthesize MgH_(2)@Mg(BH_(4))_(2) composite via ball-milling MgH_(2) with cheap and widely available B_(2)O_(3)(or B(OH)_(3)).By adding small amounts of B_(2)O_(3),the in-situ formed Mg(BH_(4))_(2) could significantly promote the hydrolysis of MgH_(2).In particular,the MgH_(2)–10 wt%B_(2)O_(3) composite releases 1330.7 mL·g^(−1) H_(2)(close to 80%theoretical hydrogen generation H_(2))in H_(2)O and 1520.4 mL·g^(−1) H_(2)(about 95%)in 0.5 M MgCl_(2) in 60 min at 26℃ with hydrolysis rate of 736.9 mL·g^(−1)·min^(−1) and 960.9 mL·g^(−1)·min^(−1) H_(2) during the first minute of the hydrolysis,respectively.In addition,the MgCl_(2) solution allows repeated use by filtering and exhibits high cycle stability(20 cycles),therefore leading to much reduced capacity loss caused by the excess H_(2)O.We show that by introducing B_(2)O_(3) and recycling the 0.5 M MgCl_(2) solution,the system hydrogen capacity can approach 5.9 wt%,providing a promising hydrogen generation scheme to supply hydrogen to the fuel cells.
基金Department of Electronics and Information Technology(Deit Y),Government of India for financial supportB.P.H.E Society's Ahmednagar College Ahmednagar for financial supportNanocrystalline Materials Group C-MET for the kind support
文摘Herein, we report visible light active mesoporous cadmium bismuth niobate（CBN） nanospheres as a photocatalyst for hydrogen（H） generation from copious hydrogen sulfide（HS）. CBN has been synthesized by solid state reaction（SSR） and also using combustion method（CM） at relatively lower temperatures.The as-synthesized materials were characterized using different techniques. X-ray diffraction analysis shows the formation of single phase orthorhombic CBN. Field emission scanning electron microscopy and high resolution-transmission electron microscopy showed the particle size in the range of.5–1 μm for CBN obtained by SSR and 50–70 nm size nanospheres using CM, respectively. Interestingly, nanospheres of size 50–70 nm self assembled with 5–7 nm nanoparticles were observed in case of CBN prepared by CM.The optical properties were studied using UV–visible diffuse reflectance spectroscopy and showed band gap around.0 eV for SSR and 3.1 eV for CM. The slight shift in band gap of CM is due to nanocrystalline nature of material. Considering the band gap in visible region, the photocatalytic activity of CBN for hydrogen production from HS has been performed under visible light. CBN prepared by CM has shown utmost hydrogen evolution i.e. 6912 μmol/h/0.5 g which is much higher than CBN prepared using SSR.The enhanced photocatalytic property can be attributed to the smaller particle size, crystalline nature,high surface area and mesoporous structure of CBN prepared by combustion method. The catalyst was found to be stable, active and can be utilized for water splitting.
文摘Noble metal palladium(Pd)is well‐known as excellent photocatalytic cocatalyst,but its strong adsorption to hydrogen causes its limited H2‐evolution activity.In this study,the transition metal Cu was successfully introduced into the metallic Pd to weaken its hydrogen‐adsorption strength to improve its interfacial H_(2)‐evolution rate via the Pd‐Cu alloying effect.Herein,the ultrasmall Pd_(100−x)Cu_(x) alloy nanodots(2−5 nm)as a novel H_(2)‐evolution cocatalyst were integrated with the TiO_(2) through a simple NaH_(2)PO_(2)‐mediated co‐deposition route.The resulting Pd_(100−x)Cu_(x)/TiO_(2) sample shows the significantly enhanced photocatalytic H_(2)‐generation performance(269.2μmol h^(−1)),which is much higher than the bare TiO2.Based on in situ irradiated X‐ray photoelectron spectroscopy(ISI‐XPS)and density functional theory(DFT)results,the as‐formed Pd_(100−x)Cu_(x) alloy nanodots can effectively promote the separation of photo‐generated charges and weak the adsorption strength for hydrogen to optimize the process of hydrogen‐desorption process on Pd_(75)Cu_(25) alloy,thus leading to high photocatalytic H_(2)‐evolution activity.Herein,the weakened H adsorption of Pd_(75)Cu_(25) cocatalyst can be ascribed to the formation of electron‐rich Pd after the introduction of weak electronegativity Cu.The present work about optimizing electronic structure for promoting interfacial reaction activity provides a new sight for the development of the highly efficient photocatalysts.
