Three-dimensional geological modeling （3DGM） assists geologists to quantitatively study in three-dimensional （3D） space structures that define temporal and spatial relationships between geological objects. The 3D ...Three-dimensional geological modeling （3DGM） assists geologists to quantitatively study in three-dimensional （3D） space structures that define temporal and spatial relationships between geological objects. The 3D property model can also be used to infer or deduce causes of geological objects. 3DGM technology provides technical support for extraction of diverse geoscience information, 3D modeling, and quantitative calculation of mineral resources. Based on metallogenic concepts and an ore deposit model, 3DGM technology is applied to analyze geological characteristics of the Tongshan Cu deposit in order to define a metallogenic model and develop a virtual borehole technology; a BP neural network and a 3D interpolation technique were combined to integrate multiple geoscience information in a 3D environment. The results indicate： （1） on basis of the concept of magmatic-hydrothermal Cu polymetallic mineraliza- tion and a porphyry Cu deposit model, a spatial relational database of multiple geoscience information for mineralization in the study area （geology, geophysics, geochemistry, borehole, and cross-section data） was established, and 3D metallogenic geological objects including mineralization stratum, granodiorite, alteration rock, and magnetic anomaly were constructed; （2） on basis of the 3D ore deposit model, 23,800 effective surveys from 94 boreholes and 21 sections were applied to establish 3D orebody models with a kriging interpolation method; （3） combined 23,800 surveys involving 21 sections, using VC＋＋ and OpenGL platform, virtual borehole and virtual section with BP network, and an improved inverse distance interpolation （IDW） method were used to predict and delineate mineralization potential targets （Cu-grade of cell not less than 0.1%）; （4） comparison of 3D ore bodies, metallogenic geological objects of mineralization, and potential targets of mineralization models in the study area, delineated the 3D spatial and temporal relationship and causal processes among the ore bodies, alteration rock, metallo- genic stratum, intrusive rock, and the Tongshan Fault. This study provides important technical support and a scientific basis for assessment of the Tongshan Cu deposit and surrounding exploration and mineral resources.展开更多
3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situa...3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situations. This paper summarizes the general concept of geological modeling; compares the characteristics of borehole-based modeling, cross-section based modeling and multi- source interactive modeling; analyses key techniques in 3-D geological modeling; and highlights the main difficulties and directions of future studies.展开更多
3D geological modeling, one of the most important applications in geosciences of 3D GIS, forms the basis and is a prerequisite for visualized representation and analysis of 3D geological data. Computer modeling of geo...3D geological modeling, one of the most important applications in geosciences of 3D GIS, forms the basis and is a prerequisite for visualized representation and analysis of 3D geological data. Computer modeling of geological faults in 3D is currently a topical research area. Structural modeling techniques of complex geological entities contain- ing reverse faults are discussed and a series of approaches are proposed. The geological concepts involved in computer modeling and visualization of geological fault in 3D are explained, the type of data of geological faults based on geo- logical exploration is analyzed, and a normative database format for geological faults is designed. Two kinds of model- ing approaches for faults are compared: a modeling technique of faults based on stratum recovery and a modeling tech- nique of faults based on interpolation in subareas. A novel approach, called the Unified Modeling Technique for stratum and fault, is presented to solve the puzzling problems of reverse faults, syn-sedimentary faults and faults terminated within geological models. A case study of a fault model of bed rock in the Beijing Olympic Green District is presented in order to show the practical result of this method. The principle and the process of computer modeling of geological faults in 3D are discussed and a series of applied technical proposals established. It strengthens our profound compre- hension of geological phenomena and the modeling approach, and establishes the basic techniques of 3D geological modeling for practical applications in the field of geosciences.展开更多
To improve the efficiency and accuracy of carbonate reservoir research,a unified reservoir knowledge base linking geological knowledge management with reservoir research is proposed.The reservoir knowledge base serves...To improve the efficiency and accuracy of carbonate reservoir research,a unified reservoir knowledge base linking geological knowledge management with reservoir research is proposed.The reservoir knowledge base serves high-quality analysis,evaluation,description and geological modeling of reservoirs.The knowledge framework is divided into three categories:technical service standard,technical research method and professional knowledge and cases related to geological objects.In order to build a knowledge base,first of all,it is necessary to form a knowledge classification system and knowledge description standards;secondly,to sort out theoretical understandings and various technical methods for different geologic objects and work out a technical service standard package according to the technical standard;thirdly,to collect typical outcrop and reservoir cases,constantly expand the content of the knowledge base through systematic extraction,sorting and saving,and construct professional knowledge about geological objects.Through the use of encyclopedia based collaborative editing architecture,knowledge construction and sharing can be realized.Geological objects and related attribute parameters can be automatically extracted by using natural language processing(NLP)technology,and outcrop data can be collected by using modern fine measurement technology,to enhance the efficiency of knowledge acquisition,extraction and sorting.In this paper,the geological modeling of fracture-cavity reservoir in the Tarim Basin is taken as an example to illustrate the construction of knowledge base of carbonate reservoir and its application in geological modeling of fracture-cavity carbonate reservoir.展开更多
Due to the complex nature of multi-source geological data, it is difficult to rebuild every geological structure through a single 3D modeling method. The multi-source data interpretation method put forward in this ana...Due to the complex nature of multi-source geological data, it is difficult to rebuild every geological structure through a single 3D modeling method. The multi-source data interpretation method put forward in this analysis is based on a database-driven pattern and focuses on the discrete and irregular features of geological data. The geological data from a variety of sources covering a range of accuracy, resolution, quantity and quality are classified and integrated according to their reliability and consistency for 3D modeling. The new interpolation-approximation fitting construction algorithm of geological surfaces with the non-uniform rational B-spline(NURBS) technique is then presented. The NURBS technique can retain the balance among the requirements for accuracy, surface continuity and data storage of geological structures. Finally, four alternative 3D modeling approaches are demonstrated with reference to some examples, which are selected according to the data quantity and accuracy specification. The proposed approaches offer flexible modeling patterns for different practical engineering demands.展开更多
Take the Cambrian Xiaoerblak Formation in the Keping(Kalpin) outcrop area as an example, a 28 km reservoir scale geological model was built based on description of 7 profiles, observation of more than 1000 thin sectio...Take the Cambrian Xiaoerblak Formation in the Keping(Kalpin) outcrop area as an example, a 28 km reservoir scale geological model was built based on description of 7 profiles, observation of more than 1000 thin sections, petrophysical analysis of 556 samples and many geochemical tests. The Xiaoerblak Formation, 158–178 m thick, is divided into three members and 5 submembers, and is composed of laminated microbialite dolomite(LMD), thrombolite dolomite(TD), foamy-stromatolite dolomite(FSD), oncolite dolomite(OD), grain dolomite(GD)/crystalline dolomite with grain ghost and micritic dolomite(MD)/argillaceous dolomite. The petrology features show that its sediment sequence is micro-organism layer – microbial mound/shoal – tidal flat in carbonate ramp background from bottom up. The reservoir has 5 types of pores, namely, framework pore, dissolved vug, intergranular and intragranular dissolved pore and intercrystalline dissolved pore, as main reservoir space. It is found that the development of pore has high lithofacies selectivity, FSD has the highest average porosity, TD, OD and GD come second. The reservoir is pore-vug reservoir with medium-high porosity and medium-low permeability. The dolomite of Xiaoerblak Formation was formed in para-syngenetic to early diagenetic stage through dolomitization caused by seawater. The reservoir development is jointly controlled by sedimentary facies, micro-organism type, high frequency sequence interface and early dolomitization. The classⅠand Ⅱ reservoirs, with an average thickness of 41.2 m and average reservoir-stratum ratio of about 25.6%, have significant potential. It is predicted that the microbial mounds and shoals in the middle ramp around the ancient uplift are the favorable zones for reservoir development.展开更多
The dynamic updating of the model included: the change of space border,addi- tion and reduction of spatial component (disappearing,dividing and merging),the change of the topological relationship and synchronous dynam...The dynamic updating of the model included: the change of space border,addi- tion and reduction of spatial component (disappearing,dividing and merging),the change of the topological relationship and synchronous dynamic updating of database.Firstly, arming at the deficiency of OO-Solid model in the aspect of dynamic updating,modeling primitives of OO-Solid model were modified.And then the algorithms of dynamic updating of 3D geological model with the node data,line data or surface data change were dis- cussed.The core algorithms was done by establishing space index,following the way of facing the object from bottom to top,namely the dynamic updating from the node to arc, and then to polygon,then to the face of the component and finally to the geological object. The research has important theoretical and practical values in the field of three dimen- sional geological modeling and is significant in the field of mineral resources.展开更多
In this research, a method called ANNMG is presented to integrate Artificial Neural Networks and Geostatistics for optimum mineral reserve evaluation. The word ANNMG simply means Artificial Neural Network Model integr...In this research, a method called ANNMG is presented to integrate Artificial Neural Networks and Geostatistics for optimum mineral reserve evaluation. The word ANNMG simply means Artificial Neural Network Model integrated with Geostatiscs, In this procedure, the Artificial Neural Network was trained, tested and validated using assay values obtained from exploratory drillholes. Next, the validated model was used to generalize mineral grades at known and unknown sampled locations inside the drilling region respectively. Finally, the reproduced and generalized assay values were combined and fed to geostatistics in order to develop a geological 3D block model. The regression analysis revealed that the predicted sample grades were in close proximity to the actual sample grades, The generalized grades from the ANNMG show that this process could be used to complement exploration activities thereby reducing drilling requirement. It could also be an effective mineral reserve evaluation method that could oroduce optimum block model for mine design.展开更多
A new method of multi-scale modeling and display of geologic data is introduced to provide information with appropriate detail levels for different types of research. The multi-scale display mode employs a model exten...A new method of multi-scale modeling and display of geologic data is introduced to provide information with appropriate detail levels for different types of research. The multi-scale display mode employs a model extending existing 2D methods into 3D space. Geologic models with different scales are organized by segmenting data into orthogonal blocks. A flow diagram illustrates an octree method for upscaling between blocks with different scales. Upscaling data from the smallest unit cells takes into account their average size and the Burgers vector when there are mismatches. A geocellular model of the Chengdao Reservoir of the Shengli Oilfield, China is taken as an illustrative case, showing that the methods proposed can construct a multi-scale geologic model correctly and display data from the multi-scale model effectively in 3D.展开更多
A new back-analysis method of ground stress is proposed with comprehensive consideration of influence of topography, geology and nonlinear physical mechanical properties of rock on ground stress. This method based on ...A new back-analysis method of ground stress is proposed with comprehensive consideration of influence of topography, geology and nonlinear physical mechanical properties of rock on ground stress. This method based on non-uniform rational B-spline (NURBS) technology provides the means to build a refined three-dimensional finite element model with more accurate meshing under complex terrain and geological conditions. Meanwhile, this method is a back-analysis of ground stress with combination of multivariable linear regression model and neural network (ANN) model. Firstly, the regression model is used to fit approximately boundary loads. Regarding the regressed loads as mean value, some sets of boundary loads with the same interval are constructed according to the principle of orthogonal design, to calculate the corresponding ground stress at the observation positions using finite element method. The results (boundary loads and the corresponding ground stress) are added to the samples for ANN training. And on this basis, an ANN model is established to implement higher precise back-analysis of initial ground stress. A practical application case shows that the relative error between the inversed ground stress and observed value is mostly less than 10 %, which can meet the need of engineering design and construction requirements.展开更多
This study presents a comprehensive geological modeling approach to understanding the Hartha Formation in the Balad Oilfield.Utilizing Petrel software,a 3D geological model was developed,integrating well data,seismic ...This study presents a comprehensive geological modeling approach to understanding the Hartha Formation in the Balad Oilfield.Utilizing Petrel software,a 3D geological model was developed,integrating well data,seismic contour map,and log analyses to delineate the reservoir’s structural and petrophysical properties.Data preparation involved organizing well headers,tops,and logs from five key wells,followed by the creation of a structural contour map that identified major and minor faults influencing the reservoir.Structural modeling further enhanced the understanding of the Hartha Formation’s geometry,illustrating how tectonic influences and faulting impacted the spatial distribution of reservoir units.Facies modeling identified a predominance of mudstone and wackestone in the upper Hartha Formation,with improved reservoir qualities in the Har.UA and Har.UB units.Petrophysical modeling demonstrated variations in porosity and water saturation,highlighting the impact of structural features on fluid distribution.The findings underscore the complex geological interplay within the Hartha Formation,providing critical insights for future exploration and optimized hydrocarbon recovery strategies.展开更多
The Zhuxi tungsten deposit in Jiangxi Province,South China,contains a total W reserve of about 2.86 Mt at an average grade of 0.54 wt%WO3,representing the largest W deposit in the world.Numerous studies on the metallo...The Zhuxi tungsten deposit in Jiangxi Province,South China,contains a total W reserve of about 2.86 Mt at an average grade of 0.54 wt%WO3,representing the largest W deposit in the world.Numerous studies on the metallogeny of the deposit have included its timing,the ore-controlling structures and sedimentary host rocks and their implications for mineral exploration.However,the deep nappe structural style of Taqian-Fuchun metallogenic belt that hosts the W deposit,and the spatial shape and scale of deeply concealed intrusions and their sedimentary host rocks are still poorly defined,which seriously restricts the discovery of new deposits at depth and in surrounding areas of the W deposit.Modern 3 D geological modeling is an important tool for the exploration of concealed orebodies,especially in brownfield environments.There are obvious density contrast and weak magnetic contrast in the ore-controlling strata and granite at the periphery of the deposit,which lays a physical foundation for solving the 3 D spatial problems of the ore-controlling geological body in the deep part of the study area through gravity and magnetic modeling.Gravity data(1:50000)and aeromagnetic data(1:50000)from the latest geophysical surveys of 2016-2018 have been used,firstly,to carry out a potential field separation to obtain residual anomalies for gravity and magnetic interactive inversion.Then,on the basis of the analysis of the relationship between physical properties and lithology,under the constraints of surface geology and borehole data,human-computer interactive gravity and magnetic inversion for 18 cross-sections were completed.Finally,the 3 D geological model of the Zhuxi tungsten deposit and its periphery have been established through these 18 sections,and the spatial shape of the intrusions and strata with a depth of 5 km underground were obtained,initially realizing―transparency‖for ore-controlling bodies.According the analysis of the geophysical,geochemical,and geological characteristics of the Zhuxi tungsten deposit,we discern three principles for prospecting and prediction in the research area,and propose five new exploration targets in its periphery.展开更多
Uncertainty in 3D geological structure models has become a bottleneck that restricts the development and application of 3D geological modeling.In order to solve this problem during periods of accuracy assessment,error...Uncertainty in 3D geological structure models has become a bottleneck that restricts the development and application of 3D geological modeling.In order to solve this problem during periods of accuracy assessment,error detection and dynamic correction in 3D geological structure models,we have reviewed the current situation and development trends in 3D geological modeling.The main context of uncertainty in 3D geological structure models is discussed.Major research issues and a general framework system of uncertainty in 3D geological structure models are proposed.We have described in detail the integration of development practices of 3D geological modeling systems,as well as the implementation process for uncertainty evaluation in 3D geological structure models.This study has laid the basis to build theoretical and methodological systems for accuracy assessment and error correction in 3D geological models and can assist in improving 3D modeling techniques under complex geological conditions.展开更多
On the study of the basic characteristics of geological objects and the special requirement for computing 3D geological model, this paper gives an object-oriented 3D topologic data model. In this model, the geological...On the study of the basic characteristics of geological objects and the special requirement for computing 3D geological model, this paper gives an object-oriented 3D topologic data model. In this model, the geological objects are divided into four object classes: point, line, area and volume. The volume class is further divided into four subclasses: the composite volume, the complex volume, the simple volume and the component. Twelve kinds of topological relations and the related data structures are designed for the geological objects.展开更多
A new geological model of Member 3 of Shahejie Formation reservoir in the Liuzan Oilfield, eastern Hebei Province was constructed by using modem reservoir modeling technology as sequence stratigraphy and conditional s...A new geological model of Member 3 of Shahejie Formation reservoir in the Liuzan Oilfield, eastern Hebei Province was constructed by using modem reservoir modeling technology as sequence stratigraphy and conditional simulation combined with traditional geological analysis. The model consists of a stratigraphic framework model, a structural model, a sedimentary model and a reservoir model. The study shows that the reservoir is a relatively integrated nose structure, whose strata can be divided into 4 sets of parasequence, 12 parasequences. The submerged branched channel of fan delta front is the favorable microfacies, which controls the geometric shape and physical properties of reservoir sandstone. Oil is distributed in premium reservoir sandstones at structural high positions. According to the new geological model, not only the geological contradictions appearing during oil field development are resolved, but also the oil-bearing area is enlarged by 2.7km^2 and geological reserves increased by 156.9 million tons. The production capacity of the Liuzan Oilfield is increased by 0.27 million tons per year.展开更多
In the Ken 71 development block, fluvial facies of the Neogene Guantao Formation and delta facies of the Paleogene Dongying Formation are the main pay beds. It is a multiple oil and water system which is complicated b...In the Ken 71 development block, fluvial facies of the Neogene Guantao Formation and delta facies of the Paleogene Dongying Formation are the main pay beds. It is a multiple oil and water system which is complicated by faults. Characteristics of the block include a dense well network, thin reservoirs, complicated horizontal relationships, and small velocity difference between reservoir and non-reservoir. Therefore, it is difficult to conduct detailed reservoir description for subsequent development project adjustment. We demonstrate a stochastic seismic inversion which aims at detailed reservoir description. It is a technology which utilizes multiple wells, seismic data, and geological calibration and integrates with 3D structural interpretation results to build a 3D multi-fault detailed and constrained geological model. On this basis, we adopted stochastic seismic inversion to conduct a multi-stratum parameters inversion such as impedance and lithology. As a result, thin interbedded strata in the block were well resolved and the results demonstrated the importance of detailed reservoir inversion for oilfield development.展开更多
Sandy debris flow deposits are present in Unit I during Miocene of Gas Field A in the Baiyun Depression of the South China Sea. The paucity of well data and the great variability of the sedimentary microfacies make it...Sandy debris flow deposits are present in Unit I during Miocene of Gas Field A in the Baiyun Depression of the South China Sea. The paucity of well data and the great variability of the sedimentary microfacies make it difficult to identify and predict the distribution patterns of the main gas reservoir, and have seriously hindered further exploration and development of the gas field. Therefore, making full use of the available seismic data is extremely important for predicting the spatial distribution of sedimentary microfacies when constructing three-dimensional reservoir models. A suitable reservoir modeling strategy or workflow controlled by sedimentary microfacies and seismic data has been developed. Five types of seismic attributes were selected to correlate with the sand percentage, and the root mean square （RMS） amplitude performed the best. The relation between the RMS amplitude and the sand percentage was used to construct a reservoir sand distribution map. Three types of main sedimentary microfacies were identified： debris channels, fan lobes, and natural levees. Using constraints from the sedimentary microfacies boundaries, a sedimentary microfacies model was constructed using the sequential indicator and assigned value simulation methods. Finally, reservoir models of physical properties for sandy debris flow deposits controlled by sedimentary microfacies and seismic inversion data were established. Property cutoff values were adopted because the sedimentary microfacies and the reservoir properties from well-logging interpretation are intrinsically different. Selection of appropriate reservoir property cutoffs is a key step in reservoir modeling when using simulation methods based on sedimentary microfacies control. When the abnormal data are truncated and the reservoir properties probability distribution fits a normal distribution, microfacies-controlled reservoir property models are more reliable than those obtained from the sequence Gauss simulation method. The cutoffs for effective porosity of the debris channel, fan lobe, and natural levee facies were 0.2, 0.09, and 0.12, respectively; the corresponding average effective porosities were 0.24, 0.13, and 0.15. The proposed modeling method makes full use of seismic attributes and seismic inversion data, and also makes the property data of single-well depositional microfacies more conformable to a normal distribution with geological significance. Thus, the method allows use of more reliable input data when we construct a model of a sandy debris flow.展开更多
In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot...In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.展开更多
Based on long-term dynamic tracing of dissolved inorganic carbon(DIC)and stable carbon isotope(δ13CDIC)in produced water from 20 coalbed methane(CBM)wells in western Guizhou,the spatial-temporal dynamic variations of...Based on long-term dynamic tracing of dissolved inorganic carbon(DIC)and stable carbon isotope(δ13CDIC)in produced water from 20 coalbed methane(CBM)wells in western Guizhou,the spatial-temporal dynamic variations ofδ13CDIC of the GP well group produced in multi-layer commingled manner were analyzed,and the relationship between the value ofδ13CDIC and CBM productivity was examined.The produced water samples of typical wells in the GP well group were amplified and sequenced using 16S rDNA,and a geological response model ofδ13CDIC in produced water from CBM wells with multi-coal seams was put forward.The research shows that:δ13CDIC in produced water from medium-rank coal seams commonly show positive anomalies,the produced water contains more than 15 species of methanogens,and Methanobacterium is the dominant genus.The dominant methanogens sequence numbers in the produced water are positively correlated withδ13CDIC,and the positive anomaly of v is caused by reduction of methanogens,and especially hydrogenotrophic methanogens.Vertical segmentation of sedimentary facies and lithology in stratum with multi-coal seams will result in permeability and water cut segmentation,which will lead to the segmentation ofδ13CDIC and archaea community in produced water,so in the strata with better permeability and high water cut,theδ13CDIC of the produced water is abnormally enriched,and the dominant archaea is mainly Methanobacterium.In the strata with weak permeability and low water cut,theδ13CDIC of the produced water is small,and the microbial action is weak.The shallow layer close to the coal seam outcrop is likely to be affected by meteoric precipitation,so theδ13CDIC of the produced water is smaller.The geological response model ofδ13CDIC in produced water from multi-coal seams CBM wells in the medium-rank coal reveals the geological mechanism and microbial action mechanism of theδ13CDIC difference in the produced water from the multi-coal seams CBM wells.It also provides effective geochemical evidence for the superimposed fluid system controlled by sedimentary facies,and can also be used for the contribution analysis of the produced gas and water by the multi-layer CBM wells.展开更多
基金supported by the National Basic Research Program of China(Grant No.1212010881001 )the National Scicnce of the 12th "Five-Year Technology Support Program"(Grant No.2010BAE00281-6)+1 种基金the National Natural Science Foundation of China(Grant Nos.40772157,40972232, 41072070)the State Key Laboratory of Geological Processes and Mineral Resources(Grant Nos.GPMR0941,200624)
文摘Three-dimensional geological modeling （3DGM） assists geologists to quantitatively study in three-dimensional （3D） space structures that define temporal and spatial relationships between geological objects. The 3D property model can also be used to infer or deduce causes of geological objects. 3DGM technology provides technical support for extraction of diverse geoscience information, 3D modeling, and quantitative calculation of mineral resources. Based on metallogenic concepts and an ore deposit model, 3DGM technology is applied to analyze geological characteristics of the Tongshan Cu deposit in order to define a metallogenic model and develop a virtual borehole technology; a BP neural network and a 3D interpolation technique were combined to integrate multiple geoscience information in a 3D environment. The results indicate： （1） on basis of the concept of magmatic-hydrothermal Cu polymetallic mineraliza- tion and a porphyry Cu deposit model, a spatial relational database of multiple geoscience information for mineralization in the study area （geology, geophysics, geochemistry, borehole, and cross-section data） was established, and 3D metallogenic geological objects including mineralization stratum, granodiorite, alteration rock, and magnetic anomaly were constructed; （2） on basis of the 3D ore deposit model, 23,800 effective surveys from 94 boreholes and 21 sections were applied to establish 3D orebody models with a kriging interpolation method; （3） combined 23,800 surveys involving 21 sections, using VC＋＋ and OpenGL platform, virtual borehole and virtual section with BP network, and an improved inverse distance interpolation （IDW） method were used to predict and delineate mineralization potential targets （Cu-grade of cell not less than 0.1%）; （4） comparison of 3D ore bodies, metallogenic geological objects of mineralization, and potential targets of mineralization models in the study area, delineated the 3D spatial and temporal relationship and causal processes among the ore bodies, alteration rock, metallo- genic stratum, intrusive rock, and the Tongshan Fault. This study provides important technical support and a scientific basis for assessment of the Tongshan Cu deposit and surrounding exploration and mineral resources.
文摘3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situations. This paper summarizes the general concept of geological modeling; compares the characteristics of borehole-based modeling, cross-section based modeling and multi- source interactive modeling; analyses key techniques in 3-D geological modeling; and highlights the main difficulties and directions of future studies.
基金Project 2001AA135170 supported by the National High-Tech Research and Development (863) Program of China and 06ZR14031 by the Natural ScienceFoundation of Shanghai Municipality
文摘3D geological modeling, one of the most important applications in geosciences of 3D GIS, forms the basis and is a prerequisite for visualized representation and analysis of 3D geological data. Computer modeling of geological faults in 3D is currently a topical research area. Structural modeling techniques of complex geological entities contain- ing reverse faults are discussed and a series of approaches are proposed. The geological concepts involved in computer modeling and visualization of geological fault in 3D are explained, the type of data of geological faults based on geo- logical exploration is analyzed, and a normative database format for geological faults is designed. Two kinds of model- ing approaches for faults are compared: a modeling technique of faults based on stratum recovery and a modeling tech- nique of faults based on interpolation in subareas. A novel approach, called the Unified Modeling Technique for stratum and fault, is presented to solve the puzzling problems of reverse faults, syn-sedimentary faults and faults terminated within geological models. A case study of a fault model of bed rock in the Beijing Olympic Green District is presented in order to show the practical result of this method. The principle and the process of computer modeling of geological faults in 3D are discussed and a series of applied technical proposals established. It strengthens our profound compre- hension of geological phenomena and the modeling approach, and establishes the basic techniques of 3D geological modeling for practical applications in the field of geosciences.
基金Supported by the China National Science and Technology Major Project(2016ZX05014-002,2017ZX05005)Chinese Academy of Sciences Pilot A Special Project(XDA14010205)。
文摘To improve the efficiency and accuracy of carbonate reservoir research,a unified reservoir knowledge base linking geological knowledge management with reservoir research is proposed.The reservoir knowledge base serves high-quality analysis,evaluation,description and geological modeling of reservoirs.The knowledge framework is divided into three categories:technical service standard,technical research method and professional knowledge and cases related to geological objects.In order to build a knowledge base,first of all,it is necessary to form a knowledge classification system and knowledge description standards;secondly,to sort out theoretical understandings and various technical methods for different geologic objects and work out a technical service standard package according to the technical standard;thirdly,to collect typical outcrop and reservoir cases,constantly expand the content of the knowledge base through systematic extraction,sorting and saving,and construct professional knowledge about geological objects.Through the use of encyclopedia based collaborative editing architecture,knowledge construction and sharing can be realized.Geological objects and related attribute parameters can be automatically extracted by using natural language processing(NLP)technology,and outcrop data can be collected by using modern fine measurement technology,to enhance the efficiency of knowledge acquisition,extraction and sorting.In this paper,the geological modeling of fracture-cavity reservoir in the Tarim Basin is taken as an example to illustrate the construction of knowledge base of carbonate reservoir and its application in geological modeling of fracture-cavity carbonate reservoir.
基金Supported by the National Natural Science Foundation of China(No.51379006 and No.51009106)the Program for New Century Excellent Talents in University of Ministry of Education of China(No.NCET-12-0404)the National Basic Research Program of China("973"Program,No.2013CB035903)
文摘Due to the complex nature of multi-source geological data, it is difficult to rebuild every geological structure through a single 3D modeling method. The multi-source data interpretation method put forward in this analysis is based on a database-driven pattern and focuses on the discrete and irregular features of geological data. The geological data from a variety of sources covering a range of accuracy, resolution, quantity and quality are classified and integrated according to their reliability and consistency for 3D modeling. The new interpolation-approximation fitting construction algorithm of geological surfaces with the non-uniform rational B-spline(NURBS) technique is then presented. The NURBS technique can retain the balance among the requirements for accuracy, surface continuity and data storage of geological structures. Finally, four alternative 3D modeling approaches are demonstrated with reference to some examples, which are selected according to the data quantity and accuracy specification. The proposed approaches offer flexible modeling patterns for different practical engineering demands.
基金Supported by the China National Science and Technology Major Project of(2016ZX05004-002)Petro China Science and Technology Major Project(2019B-0405 and 2018A-0103)
文摘Take the Cambrian Xiaoerblak Formation in the Keping(Kalpin) outcrop area as an example, a 28 km reservoir scale geological model was built based on description of 7 profiles, observation of more than 1000 thin sections, petrophysical analysis of 556 samples and many geochemical tests. The Xiaoerblak Formation, 158–178 m thick, is divided into three members and 5 submembers, and is composed of laminated microbialite dolomite(LMD), thrombolite dolomite(TD), foamy-stromatolite dolomite(FSD), oncolite dolomite(OD), grain dolomite(GD)/crystalline dolomite with grain ghost and micritic dolomite(MD)/argillaceous dolomite. The petrology features show that its sediment sequence is micro-organism layer – microbial mound/shoal – tidal flat in carbonate ramp background from bottom up. The reservoir has 5 types of pores, namely, framework pore, dissolved vug, intergranular and intragranular dissolved pore and intercrystalline dissolved pore, as main reservoir space. It is found that the development of pore has high lithofacies selectivity, FSD has the highest average porosity, TD, OD and GD come second. The reservoir is pore-vug reservoir with medium-high porosity and medium-low permeability. The dolomite of Xiaoerblak Formation was formed in para-syngenetic to early diagenetic stage through dolomitization caused by seawater. The reservoir development is jointly controlled by sedimentary facies, micro-organism type, high frequency sequence interface and early dolomitization. The classⅠand Ⅱ reservoirs, with an average thickness of 41.2 m and average reservoir-stratum ratio of about 25.6%, have significant potential. It is predicted that the microbial mounds and shoals in the middle ramp around the ancient uplift are the favorable zones for reservoir development.
基金the National Natural Science Foundation of China(40572165)
文摘The dynamic updating of the model included: the change of space border,addi- tion and reduction of spatial component (disappearing,dividing and merging),the change of the topological relationship and synchronous dynamic updating of database.Firstly, arming at the deficiency of OO-Solid model in the aspect of dynamic updating,modeling primitives of OO-Solid model were modified.And then the algorithms of dynamic updating of 3D geological model with the node data,line data or surface data change were dis- cussed.The core algorithms was done by establishing space index,following the way of facing the object from bottom to top,namely the dynamic updating from the node to arc, and then to polygon,then to the face of the component and finally to the geological object. The research has important theoretical and practical values in the field of three dimen- sional geological modeling and is significant in the field of mineral resources.
基金the management of Sierra Rutile Company for providing the drillhole dataset used in this studythe Japanese Ministry of Education Science and Technology (MEXT) Scholarship for academic funding
文摘In this research, a method called ANNMG is presented to integrate Artificial Neural Networks and Geostatistics for optimum mineral reserve evaluation. The word ANNMG simply means Artificial Neural Network Model integrated with Geostatiscs, In this procedure, the Artificial Neural Network was trained, tested and validated using assay values obtained from exploratory drillholes. Next, the validated model was used to generalize mineral grades at known and unknown sampled locations inside the drilling region respectively. Finally, the reproduced and generalized assay values were combined and fed to geostatistics in order to develop a geological 3D block model. The regression analysis revealed that the predicted sample grades were in close proximity to the actual sample grades, The generalized grades from the ANNMG show that this process could be used to complement exploration activities thereby reducing drilling requirement. It could also be an effective mineral reserve evaluation method that could oroduce optimum block model for mine design.
基金supported by the National High-Tech Research & Development Program of China (No. 2009AA062802) the Fundamental Research Funds for the Central Universities of China (No. 12CX06001A)Shandong Provincial Natural Science Foundation, China (No. ZR2011DQ011)
文摘A new method of multi-scale modeling and display of geologic data is introduced to provide information with appropriate detail levels for different types of research. The multi-scale display mode employs a model extending existing 2D methods into 3D space. Geologic models with different scales are organized by segmenting data into orthogonal blocks. A flow diagram illustrates an octree method for upscaling between blocks with different scales. Upscaling data from the smallest unit cells takes into account their average size and the Burgers vector when there are mismatches. A geocellular model of the Chengdao Reservoir of the Shengli Oilfield, China is taken as an illustrative case, showing that the methods proposed can construct a multi-scale geologic model correctly and display data from the multi-scale model effectively in 3D.
基金Innovative Research Groups of the National Natural Science Foundation of China (No.51021004)National Science Foundation of China (No. 51079096)Program for New Century Excellent Talents in University (No. NCET-08-0391)
文摘A new back-analysis method of ground stress is proposed with comprehensive consideration of influence of topography, geology and nonlinear physical mechanical properties of rock on ground stress. This method based on non-uniform rational B-spline (NURBS) technology provides the means to build a refined three-dimensional finite element model with more accurate meshing under complex terrain and geological conditions. Meanwhile, this method is a back-analysis of ground stress with combination of multivariable linear regression model and neural network (ANN) model. Firstly, the regression model is used to fit approximately boundary loads. Regarding the regressed loads as mean value, some sets of boundary loads with the same interval are constructed according to the principle of orthogonal design, to calculate the corresponding ground stress at the observation positions using finite element method. The results (boundary loads and the corresponding ground stress) are added to the samples for ANN training. And on this basis, an ANN model is established to implement higher precise back-analysis of initial ground stress. A practical application case shows that the relative error between the inversed ground stress and observed value is mostly less than 10 %, which can meet the need of engineering design and construction requirements.
文摘This study presents a comprehensive geological modeling approach to understanding the Hartha Formation in the Balad Oilfield.Utilizing Petrel software,a 3D geological model was developed,integrating well data,seismic contour map,and log analyses to delineate the reservoir’s structural and petrophysical properties.Data preparation involved organizing well headers,tops,and logs from five key wells,followed by the creation of a structural contour map that identified major and minor faults influencing the reservoir.Structural modeling further enhanced the understanding of the Hartha Formation’s geometry,illustrating how tectonic influences and faulting impacted the spatial distribution of reservoir units.Facies modeling identified a predominance of mudstone and wackestone in the upper Hartha Formation,with improved reservoir qualities in the Har.UA and Har.UB units.Petrophysical modeling demonstrated variations in porosity and water saturation,highlighting the impact of structural features on fluid distribution.The findings underscore the complex geological interplay within the Hartha Formation,providing critical insights for future exploration and optimized hydrocarbon recovery strategies.
基金jointly supported by the National Key R&D Program of China(Grant No.2016YFC0600201)China Geological Survey project(Grant Nos.DD20190012,DD20160082)the National Natural Science Foundation of China(Grant Nos.92062108,41630320,41574133)。
文摘The Zhuxi tungsten deposit in Jiangxi Province,South China,contains a total W reserve of about 2.86 Mt at an average grade of 0.54 wt%WO3,representing the largest W deposit in the world.Numerous studies on the metallogeny of the deposit have included its timing,the ore-controlling structures and sedimentary host rocks and their implications for mineral exploration.However,the deep nappe structural style of Taqian-Fuchun metallogenic belt that hosts the W deposit,and the spatial shape and scale of deeply concealed intrusions and their sedimentary host rocks are still poorly defined,which seriously restricts the discovery of new deposits at depth and in surrounding areas of the W deposit.Modern 3 D geological modeling is an important tool for the exploration of concealed orebodies,especially in brownfield environments.There are obvious density contrast and weak magnetic contrast in the ore-controlling strata and granite at the periphery of the deposit,which lays a physical foundation for solving the 3 D spatial problems of the ore-controlling geological body in the deep part of the study area through gravity and magnetic modeling.Gravity data(1:50000)and aeromagnetic data(1:50000)from the latest geophysical surveys of 2016-2018 have been used,firstly,to carry out a potential field separation to obtain residual anomalies for gravity and magnetic interactive inversion.Then,on the basis of the analysis of the relationship between physical properties and lithology,under the constraints of surface geology and borehole data,human-computer interactive gravity and magnetic inversion for 18 cross-sections were completed.Finally,the 3 D geological model of the Zhuxi tungsten deposit and its periphery have been established through these 18 sections,and the spatial shape of the intrusions and strata with a depth of 5 km underground were obtained,initially realizing―transparency‖for ore-controlling bodies.According the analysis of the geophysical,geochemical,and geological characteristics of the Zhuxi tungsten deposit,we discern three principles for prospecting and prediction in the research area,and propose five new exploration targets in its periphery.
基金provided by the Talent Training Project of the National Natural Science Foundation of China (No.J0730534)the National Natural Science Foundation of China (No.40902093)+1 种基金the Morning Light Plan of the Shanghai Educational Development Foundation (No.2007CG34)the Open Foundation of the Shanghai Key Laboratory of Urbanization and Ecological Restoration (No.200803)
文摘Uncertainty in 3D geological structure models has become a bottleneck that restricts the development and application of 3D geological modeling.In order to solve this problem during periods of accuracy assessment,error detection and dynamic correction in 3D geological structure models,we have reviewed the current situation and development trends in 3D geological modeling.The main context of uncertainty in 3D geological structure models is discussed.Major research issues and a general framework system of uncertainty in 3D geological structure models are proposed.We have described in detail the integration of development practices of 3D geological modeling systems,as well as the implementation process for uncertainty evaluation in 3D geological structure models.This study has laid the basis to build theoretical and methodological systems for accuracy assessment and error correction in 3D geological models and can assist in improving 3D modeling techniques under complex geological conditions.
文摘On the study of the basic characteristics of geological objects and the special requirement for computing 3D geological model, this paper gives an object-oriented 3D topologic data model. In this model, the geological objects are divided into four object classes: point, line, area and volume. The volume class is further divided into four subclasses: the composite volume, the complex volume, the simple volume and the component. Twelve kinds of topological relations and the related data structures are designed for the geological objects.
文摘A new geological model of Member 3 of Shahejie Formation reservoir in the Liuzan Oilfield, eastern Hebei Province was constructed by using modem reservoir modeling technology as sequence stratigraphy and conditional simulation combined with traditional geological analysis. The model consists of a stratigraphic framework model, a structural model, a sedimentary model and a reservoir model. The study shows that the reservoir is a relatively integrated nose structure, whose strata can be divided into 4 sets of parasequence, 12 parasequences. The submerged branched channel of fan delta front is the favorable microfacies, which controls the geometric shape and physical properties of reservoir sandstone. Oil is distributed in premium reservoir sandstones at structural high positions. According to the new geological model, not only the geological contradictions appearing during oil field development are resolved, but also the oil-bearing area is enlarged by 2.7km^2 and geological reserves increased by 156.9 million tons. The production capacity of the Liuzan Oilfield is increased by 0.27 million tons per year.
文摘In the Ken 71 development block, fluvial facies of the Neogene Guantao Formation and delta facies of the Paleogene Dongying Formation are the main pay beds. It is a multiple oil and water system which is complicated by faults. Characteristics of the block include a dense well network, thin reservoirs, complicated horizontal relationships, and small velocity difference between reservoir and non-reservoir. Therefore, it is difficult to conduct detailed reservoir description for subsequent development project adjustment. We demonstrate a stochastic seismic inversion which aims at detailed reservoir description. It is a technology which utilizes multiple wells, seismic data, and geological calibration and integrates with 3D structural interpretation results to build a 3D multi-fault detailed and constrained geological model. On this basis, we adopted stochastic seismic inversion to conduct a multi-stratum parameters inversion such as impedance and lithology. As a result, thin interbedded strata in the block were well resolved and the results demonstrated the importance of detailed reservoir inversion for oilfield development.
基金partly supported by the National Natural Science Foundation of China(grants no.41272132 and 41572080)the Fundamental Research Funds for central Universities(grant no.2-9-2013-97)the Major State Science and Technology Research Programs(grants no.2008ZX05056-002-02-01 and 2011ZX05010-001-009)
文摘Sandy debris flow deposits are present in Unit I during Miocene of Gas Field A in the Baiyun Depression of the South China Sea. The paucity of well data and the great variability of the sedimentary microfacies make it difficult to identify and predict the distribution patterns of the main gas reservoir, and have seriously hindered further exploration and development of the gas field. Therefore, making full use of the available seismic data is extremely important for predicting the spatial distribution of sedimentary microfacies when constructing three-dimensional reservoir models. A suitable reservoir modeling strategy or workflow controlled by sedimentary microfacies and seismic data has been developed. Five types of seismic attributes were selected to correlate with the sand percentage, and the root mean square （RMS） amplitude performed the best. The relation between the RMS amplitude and the sand percentage was used to construct a reservoir sand distribution map. Three types of main sedimentary microfacies were identified： debris channels, fan lobes, and natural levees. Using constraints from the sedimentary microfacies boundaries, a sedimentary microfacies model was constructed using the sequential indicator and assigned value simulation methods. Finally, reservoir models of physical properties for sandy debris flow deposits controlled by sedimentary microfacies and seismic inversion data were established. Property cutoff values were adopted because the sedimentary microfacies and the reservoir properties from well-logging interpretation are intrinsically different. Selection of appropriate reservoir property cutoffs is a key step in reservoir modeling when using simulation methods based on sedimentary microfacies control. When the abnormal data are truncated and the reservoir properties probability distribution fits a normal distribution, microfacies-controlled reservoir property models are more reliable than those obtained from the sequence Gauss simulation method. The cutoffs for effective porosity of the debris channel, fan lobe, and natural levee facies were 0.2, 0.09, and 0.12, respectively; the corresponding average effective porosities were 0.24, 0.13, and 0.15. The proposed modeling method makes full use of seismic attributes and seismic inversion data, and also makes the property data of single-well depositional microfacies more conformable to a normal distribution with geological significance. Thus, the method allows use of more reliable input data when we construct a model of a sandy debris flow.
基金Supported by the Sinopec Science and Technology Project(P21040-1).
文摘In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.
基金Supported by the National Natural Science Foundation of China(41772155)the National Science and Technology Major Project of China(2016ZX05044-002)
文摘Based on long-term dynamic tracing of dissolved inorganic carbon(DIC)and stable carbon isotope(δ13CDIC)in produced water from 20 coalbed methane(CBM)wells in western Guizhou,the spatial-temporal dynamic variations ofδ13CDIC of the GP well group produced in multi-layer commingled manner were analyzed,and the relationship between the value ofδ13CDIC and CBM productivity was examined.The produced water samples of typical wells in the GP well group were amplified and sequenced using 16S rDNA,and a geological response model ofδ13CDIC in produced water from CBM wells with multi-coal seams was put forward.The research shows that:δ13CDIC in produced water from medium-rank coal seams commonly show positive anomalies,the produced water contains more than 15 species of methanogens,and Methanobacterium is the dominant genus.The dominant methanogens sequence numbers in the produced water are positively correlated withδ13CDIC,and the positive anomaly of v is caused by reduction of methanogens,and especially hydrogenotrophic methanogens.Vertical segmentation of sedimentary facies and lithology in stratum with multi-coal seams will result in permeability and water cut segmentation,which will lead to the segmentation ofδ13CDIC and archaea community in produced water,so in the strata with better permeability and high water cut,theδ13CDIC of the produced water is abnormally enriched,and the dominant archaea is mainly Methanobacterium.In the strata with weak permeability and low water cut,theδ13CDIC of the produced water is small,and the microbial action is weak.The shallow layer close to the coal seam outcrop is likely to be affected by meteoric precipitation,so theδ13CDIC of the produced water is smaller.The geological response model ofδ13CDIC in produced water from multi-coal seams CBM wells in the medium-rank coal reveals the geological mechanism and microbial action mechanism of theδ13CDIC difference in the produced water from the multi-coal seams CBM wells.It also provides effective geochemical evidence for the superimposed fluid system controlled by sedimentary facies,and can also be used for the contribution analysis of the produced gas and water by the multi-layer CBM wells.
