This papcr presents a new genetic algorithms(GAs)-based method for self-learniag fuzzy control rules. An improved GA is used to learn to optimally select the fuzzy membership functions of the linguistic labels in the ...This papcr presents a new genetic algorithms(GAs)-based method for self-learniag fuzzy control rules. An improved GA is used to learn to optimally select the fuzzy membership functions of the linguistic labels in the condition portion of each rule, and to automatically generate fuzzy control actions under each condition. The dynamics of the controlled system is unknown to the GA. The only information for evaluating performance is a failure signal indicating that the controlled system is out of control. We compare its performance with that of other learning methods for the same problem. We also examine the ability of the algorithm to adapt to changing conditions. Simulation results show that such an approach for self-learning fuzzy control rules is both effective and robust.展开更多
This paper presents a novel method for constructing fuzzy controllers based on a real time reinforcement genetic algorithm. This methodology introduces the real-time learning capability of neural networks into globall...This paper presents a novel method for constructing fuzzy controllers based on a real time reinforcement genetic algorithm. This methodology introduces the real-time learning capability of neural networks into globally searching process of genetic algorithm, aiming to enhance the convergence rate and real-time learning ability of genetic algorithm, which is then used to construct fuzzy controllers for complex dynamic systems without any knowledge about system dynamics and prior control experience. The cart-pole system is employed as a test bed to demonstrate the effectiveness of the proposed control scheme, and the robustness of the acquired fuzzy controller with comparable result.展开更多
In this paper, the weld pool shape control by intelligent strategy was studied. A neuron self-learning PSD controller for backside width of weld pool in pulsed GTAW with wire filler was designed. The PSD control arith...In this paper, the weld pool shape control by intelligent strategy was studied. A neuron self-learning PSD controller for backside width of weld pool in pulsed GTAW with wire filler was designed. The PSD control arithmetic was analyzed, simulating experiment by MATLAB software was done, and the validating experiments on varied heat sink workpiece and varied gap workpiece were successfully implemented. The study results show that the neuron self-learning PSD control method can attain a perfect control effect under different set values and conditions, and is suitable for the welding process with the varied structure and coefficients of control model.展开更多
The mathematical model for online controlling hot rolled steel cooling on run-out table （ROT for abbreviation） was analyzed, and water cooling is found to be the main cooling mode for hot rolled steel. The calculati...The mathematical model for online controlling hot rolled steel cooling on run-out table （ROT for abbreviation） was analyzed, and water cooling is found to be the main cooling mode for hot rolled steel. The calculation of the drop in strip temperature by both water cooling and air cooling is summed up to obtain the change of heat transfer coefficient. It is found that the learning coefficient of heat transfer coefficient is the kernel coefficient of coiler temperature control （CTC） model tuning. To decrease the deviation between the calculated steel temperature and the measured one at coiler entrance, a laminar cooling control self-learning strategy is used. Using the data acquired in the field, the results of the self-learning model used in the field were analyzed. The analyzed results show that the self-learning function is effective.展开更多
Clinical disorders often are characterized by a breakdown in dynamical processes that contribute to the control of upright standing.Disruption to a large number of physiological processes operating at different time s...Clinical disorders often are characterized by a breakdown in dynamical processes that contribute to the control of upright standing.Disruption to a large number of physiological processes operating at different time scales can lead to alterations in postural center of pressure(Co P)fluctuations.Multiscale entropy(MSE) has been used to identify differences in fluctuations of postural Co P time series between groups with and without known physiological impairments at multiple time scales.The purpose of this paper is to:1) review basic elements and current developments in entropy techniques used to assess physiological complexity;and 2) identify how MSE can provide insights into the complexity of physiological systems operating at multiple time scales that underlie the control of posture.We review and synthesize evidence from the literature providing support for MSE as a valuable tool to evaluate the breakdown in the physiological processes that accompany changes due to aging and disease in postural control.This evidence emerges from observed lower MSE values in individuals with multiple sclerosis,idiopathic scoliosis,and in older individuals with sensory impairments.Finally,we suggest some future applications of MSE that will allow for further insight into how physiological deficits impact the complexity of postural fluctuations;this information may improve the development and evaluation of new therapeutic interventions.展开更多
Combining information entropy and wavelet analysis with neural network,an adaptive control system and an adaptive control algorithm are presented for machining process based on extended entropy square error(EESE)and w...Combining information entropy and wavelet analysis with neural network,an adaptive control system and an adaptive control algorithm are presented for machining process based on extended entropy square error(EESE)and wavelet neural network(WNN).Extended entropy square error function is defined and its availability is proved theoretically.Replacing the mean square error criterion of BP algorithm with the EESE criterion,the proposed system is then applied to the on-line control of the cutting force with variable cutting parameters by searching adaptively wavelet base function and self adjusting scaling parameter,translating parameter of the wavelet and neural network weights.Simulation results show that the designed system is of fast response,non-overshoot and it is more effective than the conventional adaptive control of machining process based on the neural network.The suggested algorithm can adaptively adjust the feed rate on-line till achieving a constant cutting force approaching the reference force in varied cutting conditions,thus improving the machining efficiency and protecting the tool.展开更多
To resolve the problem of quantitative analysis in hybrid cloud,a quantitative analysis method,which is based on the security entropy,is proposed.Firstly,according to the information theory,the security entropy is put...To resolve the problem of quantitative analysis in hybrid cloud,a quantitative analysis method,which is based on the security entropy,is proposed.Firstly,according to the information theory,the security entropy is put forward to calculate the uncertainty of the system' s determinations on the irregular access behaviors.Secondly,based on the security entropy,security theorems of hybrid cloud are defined.Finally,typical access control models are analyzed by the method,the method's practicability is validated,and security and applicability of these models are compared.Simulation results prove that the proposed method is suitable for the security quantitative analysis of the access control model and evaluation to access control capability in hybrid cloud.展开更多
This paper proposes the continuous controller design method for quantum Shannon entropy, which can continuously drive the entropy to track a desired trajectory. We also analyzed the controllability of Shannon entropy ...This paper proposes the continuous controller design method for quantum Shannon entropy, which can continuously drive the entropy to track a desired trajectory. We also analyzed the controllability of Shannon entropy in very short time interval. Simulations are done on five dimensional quantum system, which can verify the validation of the method.展开更多
文摘This papcr presents a new genetic algorithms(GAs)-based method for self-learniag fuzzy control rules. An improved GA is used to learn to optimally select the fuzzy membership functions of the linguistic labels in the condition portion of each rule, and to automatically generate fuzzy control actions under each condition. The dynamics of the controlled system is unknown to the GA. The only information for evaluating performance is a failure signal indicating that the controlled system is out of control. We compare its performance with that of other learning methods for the same problem. We also examine the ability of the algorithm to adapt to changing conditions. Simulation results show that such an approach for self-learning fuzzy control rules is both effective and robust.
文摘This paper presents a novel method for constructing fuzzy controllers based on a real time reinforcement genetic algorithm. This methodology introduces the real-time learning capability of neural networks into globally searching process of genetic algorithm, aiming to enhance the convergence rate and real-time learning ability of genetic algorithm, which is then used to construct fuzzy controllers for complex dynamic systems without any knowledge about system dynamics and prior control experience. The cart-pole system is employed as a test bed to demonstrate the effectiveness of the proposed control scheme, and the robustness of the acquired fuzzy controller with comparable result.
文摘In this paper, the weld pool shape control by intelligent strategy was studied. A neuron self-learning PSD controller for backside width of weld pool in pulsed GTAW with wire filler was designed. The PSD control arithmetic was analyzed, simulating experiment by MATLAB software was done, and the validating experiments on varied heat sink workpiece and varied gap workpiece were successfully implemented. The study results show that the neuron self-learning PSD control method can attain a perfect control effect under different set values and conditions, and is suitable for the welding process with the varied structure and coefficients of control model.
基金Item Sponsored by National Natural Science Foundation of China(50474016)
文摘The mathematical model for online controlling hot rolled steel cooling on run-out table （ROT for abbreviation） was analyzed, and water cooling is found to be the main cooling mode for hot rolled steel. The calculation of the drop in strip temperature by both water cooling and air cooling is summed up to obtain the change of heat transfer coefficient. It is found that the learning coefficient of heat transfer coefficient is the kernel coefficient of coiler temperature control （CTC） model tuning. To decrease the deviation between the calculated steel temperature and the measured one at coiler entrance, a laminar cooling control self-learning strategy is used. Using the data acquired in the field, the results of the self-learning model used in the field were analyzed. The analyzed results show that the self-learning function is effective.
文摘Clinical disorders often are characterized by a breakdown in dynamical processes that contribute to the control of upright standing.Disruption to a large number of physiological processes operating at different time scales can lead to alterations in postural center of pressure(Co P)fluctuations.Multiscale entropy(MSE) has been used to identify differences in fluctuations of postural Co P time series between groups with and without known physiological impairments at multiple time scales.The purpose of this paper is to:1) review basic elements and current developments in entropy techniques used to assess physiological complexity;and 2) identify how MSE can provide insights into the complexity of physiological systems operating at multiple time scales that underlie the control of posture.We review and synthesize evidence from the literature providing support for MSE as a valuable tool to evaluate the breakdown in the physiological processes that accompany changes due to aging and disease in postural control.This evidence emerges from observed lower MSE values in individuals with multiple sclerosis,idiopathic scoliosis,and in older individuals with sensory impairments.Finally,we suggest some future applications of MSE that will allow for further insight into how physiological deficits impact the complexity of postural fluctuations;this information may improve the development and evaluation of new therapeutic interventions.
基金Sponsored by the Natural Science Foundation of Guangdong Province(Grant No.06025546)the National Natural Science Foundation of China(Grant No.50305005).
文摘Combining information entropy and wavelet analysis with neural network,an adaptive control system and an adaptive control algorithm are presented for machining process based on extended entropy square error(EESE)and wavelet neural network(WNN).Extended entropy square error function is defined and its availability is proved theoretically.Replacing the mean square error criterion of BP algorithm with the EESE criterion,the proposed system is then applied to the on-line control of the cutting force with variable cutting parameters by searching adaptively wavelet base function and self adjusting scaling parameter,translating parameter of the wavelet and neural network weights.Simulation results show that the designed system is of fast response,non-overshoot and it is more effective than the conventional adaptive control of machining process based on the neural network.The suggested algorithm can adaptively adjust the feed rate on-line till achieving a constant cutting force approaching the reference force in varied cutting conditions,thus improving the machining efficiency and protecting the tool.
基金Supported by the National Natural Science Foundation of China(No.60872041,61072066)Fundamental Research Funds for the Central Universities(JYI0000903001,JYI0000901034)
文摘To resolve the problem of quantitative analysis in hybrid cloud,a quantitative analysis method,which is based on the security entropy,is proposed.Firstly,according to the information theory,the security entropy is put forward to calculate the uncertainty of the system' s determinations on the irregular access behaviors.Secondly,based on the security entropy,security theorems of hybrid cloud are defined.Finally,typical access control models are analyzed by the method,the method's practicability is validated,and security and applicability of these models are compared.Simulation results prove that the proposed method is suitable for the security quantitative analysis of the access control model and evaluation to access control capability in hybrid cloud.
文摘This paper proposes the continuous controller design method for quantum Shannon entropy, which can continuously drive the entropy to track a desired trajectory. We also analyzed the controllability of Shannon entropy in very short time interval. Simulations are done on five dimensional quantum system, which can verify the validation of the method.
