Immiscible bimetal systems,of which tungsten–copper(W–Cu)is a typical representative,have crucial applications in fields requiring both mechanical and physical properties.Nevertheless,it is a major challenge to dete...Immiscible bimetal systems,of which tungsten–copper(W–Cu)is a typical representative,have crucial applications in fields requiring both mechanical and physical properties.Nevertheless,it is a major challenge to determine how to give full play to the advantages of the two phases of the bimetal and achieve outstanding comprehensive properties.In this study,an ultrafine-grained W–Cu bimetal with spatially connected Cu and specific Wislands was fabricated through a designed powder-mixing process and subsequent rapid low-temperature sintering.The prepared bimetal concurrently has a high yield strength,large plastic strain,and high electrical conductivity.The stress distribution and strain response of individual phases in different types of W–Cu bimetals under loading were quantified by means of a simulation.The high yield strength of the reported bimetal results from the microstructure refinement and high contiguity of the grains in the W islands,which enhance the contribution of W to the total plastic deformation of the bimetal.The high electrical conductivity is attributed to the increased mean free path of the Cu and the reduced proportion of phase boundaries due to the specific phase combination of W islands and Cu.This work provides new insight into modulating phase configuration in immiscible metallic composites to achieve high-level multi-objective properties.展开更多
The effects of forward extrusion as well as extrusion combined with reversible torsion(KoBo extrusion),followed by additional deformation via the MaxStrain module of the Gleeble thermomechanical simulator,on the micro...The effects of forward extrusion as well as extrusion combined with reversible torsion(KoBo extrusion),followed by additional deformation via the MaxStrain module of the Gleeble thermomechanical simulator,on the microstructure,mechanical properties,and electrical conductivity of a Cu−0.7Mg(wt.%)alloy,were investigated.The simulation results highlighted the critical influence of processing history on determining the equivalent strain distribution.The sample subjected to forward extrusion at 400℃and subsequent MaxStrain processing(FM sample),possessed 76%lower grain size compared to the sample processed solely with MaxStrain(AM sample).Likewise,the KoBo-extruded and MaxStrain-processed sample(KM sample)exhibited 66%smaller grain size compared to the AM sample.Tensile test results revealed that the AM,FM,and KM samples,respectively,possessed 251%,288%,and 360%higher yield strength,and 95%,121%,and 169%higher tensile strength compared to the initial annealed alloy,as a result of grain refinement as well as deformation strengthening.Finally,the electrical conductivity measurements revealed that AM,FM,and KM samples,respectively,possessed electrical conductivity values of 37.9,35.6,and 32.0 MS/m,which,by considering their mechanical properties,makes them eligible to be categorized as high-strength and high-conductivity copper alloys.展开更多
Water electrolysis for hydrogen production offers a promising solution to future energy crises and environmental challenges.Although platinum is an efficient catalyst for hydrogen evolution reactions(HERs),its high co...Water electrolysis for hydrogen production offers a promising solution to future energy crises and environmental challenges.Although platinum is an efficient catalyst for hydrogen evolution reactions(HERs),its high cost and stability challenges limit its widespread use.A novel platinum-based catalyst,comprising platinum nanoparticles on nitrogen-doped porous graphite(Pt-N-porous graphite),addresses these limitations.This catalyst prevents nanoparticle aggregation,provides a high specific surface area of 1308 m^(2)g^(-1),and enhances mass transfer and active site exposure.Additionally,it exhibits superior electrical conductivity compared to commercial Pt-C,enhancing charge transfer efficiency.The Pt-N-porous graphite catalyst achieves an overpotential of 99 mV at 100 mA cm^(-2)and maintains stable performance after 10,000 cycles.Applied as a catalyst-coated membrane(CCM)in a proton exchange membrane(PEM)electrolyzer,it demonstrates excellent performance.Thus,the industrially synthesizable Pt-N-porous graphite catalyst holds great potential for large-scale energy applications.展开更多
Clays have considerable influence on the electrical properties of hydrate-bearing sediments.It is desirable to understand the electrical properties of hydrate-bearing clayey sediments and to build hydrate saturation(S...Clays have considerable influence on the electrical properties of hydrate-bearing sediments.It is desirable to understand the electrical properties of hydrate-bearing clayey sediments and to build hydrate saturation(S_(h))models for reservoir evaluation and monitoring.The electrical properties of tetrahydrofuran-hydrate-bearing sediments with montmorillonite are characterized by complex conductivity at frequencies from 0.01 Hz to 1 kHz.The effects of clay and Sh on the complex conductivity were analyzed.A decrease and increase in electrical conductance result from the clay-swelling-induced blockage and ion migration in the electrical double layer(EDL),respectively.The quadrature conductivity increases with the clay content up to 10%because of the increased surface site density of counterions in EDL.Both the in-phase conductivity and quadrature conductivity decrease consistently with increasing Sh from 0.50 to 0.90.Three sets of models for Sh evaluation were developed.The model based on the Simandoux equation outperforms Archie’s formula,with a root-mean-square error(E_(RMS))of 1.8%and 3.9%,respectively,highlighting the clay effects on the in-phase conductivity.The fre-quency effect correlations based on in-phase and quadrature conductivities exhibit inferior performance(E_(RMS)=11.6%and 13.2%,re-spectively)due to the challenge of choosing an appropriate pair of frequencies and intrinsic uncertainties from two measurements.The second-order Cole-Cole formula can be used to fit the complex-conductivity spectra.One pair of inverted Cole-Cole parameters,i.e.,characteristic time and chargeability,is employed to predict S_(h) with an E_(RMS) of 5.05%and 9.05%,respectively.展开更多
With the rapid development of 5G information technology,thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent.In this work,“high-temperature...With the rapid development of 5G information technology,thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent.In this work,“high-temperature solid-phase&diazonium salt decomposition”method is carried out to prepare benzidine-functionalized boron nitride(m-BN).Subsequently,m-BN/poly(pphenylene benzobisoxazole)nanofiber(PNF)nanocomposite paper with nacremimetic layered structures is prepared via sol–gel film transformation approach.The obtained m-BN/PNF nanocomposite paper with 50 wt%m-BN presents excellent thermal conductivity,incredible electrical insulation,outstanding mechanical properties and thermal stability,due to the construction of extensive hydrogen bonds andπ–πinteractions between m-BN and PNF,and stable nacre-mimetic layered structures.Itsλ∥andλ_(⊥)are 9.68 and 0.84 W m^(-1)K^(-1),and the volume resistivity and breakdown strength are as high as 2.3×10^(15)Ωcm and 324.2 kV mm^(-1),respectively.Besides,it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640°C,showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment.展开更多
Carbon nanotubes(CNTs)with high aspect ratio and excellent electrical conduction offer huge functional improvements for current carbon aerogels.However,there remains a major challenge for achieving the on-demand shapi...Carbon nanotubes(CNTs)with high aspect ratio and excellent electrical conduction offer huge functional improvements for current carbon aerogels.However,there remains a major challenge for achieving the on-demand shaping of carbon aerogels with tailored micro-nano structural textures and geometric features.Herein,a facile extrusion 3D printing strategy has been proposed for fabricating CNT-assembled carbon(CNT/C)aerogel nanocomposites through the extrusion printing of pseudoplastic carbomer-based inks,in which the stable dispersion of CNT nanofibers has been achieved relying on the high viscosity of carbomer microgels.After extrusion printing,the chemical solidification through polymerizing RF sols enables 3D-printed aerogel nanocomposites to display high shape fidelity in macroscopic geometries.Benefiting from the micro-nano scale assembly of CNT nanofiber networks and carbon nanoparticle networks in composite phases,3D-printed CNT/C aerogels exhibit enhanced mechanical strength(fracture strength,0.79 MPa)and typical porous structure characteristics,including low density(0.220 g cm^(-3)),high surface area(298.4 m^(2)g^(-1)),and concentrated pore diameter distribution(~32.8nm).More importantly,CNT nanofibers provide an efficient electron transport pathway,imparting 3D-printed CNT/C aerogel composites with a high electrical conductivity of 1.49 S cm^(-1).Our work would offer feasible guidelines for the design and fabrication of shape-dominated functional materials by additive manufacturing.展开更多
We study the global unique solutions to the 2-D inhomogeneous incompressible MHD equations,with the initial data(u0,B0)being located in the critical Besov space■and the initial densityρ0 being close to a positive co...We study the global unique solutions to the 2-D inhomogeneous incompressible MHD equations,with the initial data(u0,B0)being located in the critical Besov space■and the initial densityρ0 being close to a positive constant.By using weighted global estimates,maximal regularity estimates in the Lorentz space for the Stokes system,and the Lagrangian approach,we show that the 2-D MHD equations have a unique global solution.展开更多
Understanding the effects of cracks on the elastic and electrical properties of tight carbonates is crucial for the exploration and development of deep and ultra-deep carbonate reservoirs.In this work,the porosity,ele...Understanding the effects of cracks on the elastic and electrical properties of tight carbonates is crucial for the exploration and development of deep and ultra-deep carbonate reservoirs.In this work,the porosity,electrical conductivity and ultrasonic velocities of two brine-saturated carbonate samples(where the pore space is dominated by cracks)are measured jointly at different effective pressures(5-90 MPa),as well as the velocities with saturating nitrogen at the same pressure conditions.The results show non-linear changes in the measured values,indicating a correlation with the presence of cracks.To analyze the pressure-dependent elastic and electrical properties,an approach combining a multiphase Kachanov model with a multiphase reformulated electrical differential effective medium(REDEM)model is proposed.This approach agrees well with the pressure-dependent experimental results of brine-saturated carbonate samples.The crack aspect ratio spectra are estimated using the experimental porosity as a constraint to improve the accuracy of the inverted crack geometry.The spectra from the elastic(electrical)inversion are input into the multiphase REDEM(Kachanov)model to predict the electrical conductivity(wave velocities).Comparisons with laboratory measurements show the ability of the proposed approach to estimate elastic wave velocities from the electrical conductivity using the inverted crack geometry,and vice versa.展开更多
Graphene(Gr)has unique properties including high electrical conductivity;Thus,graphene/copper(Gr/Cu)composites have attracted increasing attention to replace traditional Cu for electrical applications. However,the pro...Graphene(Gr)has unique properties including high electrical conductivity;Thus,graphene/copper(Gr/Cu)composites have attracted increasing attention to replace traditional Cu for electrical applications. However,the problem of how to control graphene to form desired Gr/Cu composite is not well solved. This paper aims at exploring the best parameters for preparing graphene with different layers on Cu foil by chemical vapor deposition(CVD)method and studying the effects of different layers graphene on Gr/Cu composite’s electrical conductivity. Graphene grown on single-sided and double-sided copper was prepared for Gr/Cu and Gr/Cu/Gr composites. The resultant electrical conductivity of Gr/Cu composites increased with decreasing graphene layers and increasing graphene volume fraction. The Gr/Cu/Gr composite with monolayer graphene owns volume fraction of less than 0.002%,producing the best electrical conductivity up to59.8 ×10^(6)S/m,equivalent to 104.5% IACS and 105.3% pure Cu foil.展开更多
Carbon nanotubes(CNTs)have garnered great attention in recent years due to their outstanding electrical,thermal,and mechanical properties.The incorporation of small amounts of CNTs in polymers can substantially improv...Carbon nanotubes(CNTs)have garnered great attention in recent years due to their outstanding electrical,thermal,and mechanical properties.The incorporation of small amounts of CNTs in polymers can substantially improve the sensitivity of the polymer's electrical conductivity.This paper presents a modified Maxwell model to evaluate the electrical conductivity of CNTs-filled polymer composites by introducing a transition zone to account for the tunneling effect.In this modified Maxwell model,the CNTs-filled polymer composite is modeled as a three-phase composite,consisting of a matrix(polymer),inclusions(CNTs),and a transition zone(tunneling zone).The effective electrical conductivity(EEC)of the composite is calculated based on the volume fractions and electrical conductivities of the matrix,inclusions,and transition zone.The model's validity is confirmed through the use of available test data,which demonstrates its capability to accurately capture the nonlinear conductivity behavior observed in CNTs-polymer composites.This study offers valuable insights into the design of high-performance conductive polymer nanocomposites,and enhances the understanding of electrical conduction mechanisms in CNT-dispersed polymer composites.展开更多
The mechanism of seeded precipitation of sodium aluminate solution was studied by measuring the seeded-precipitation rate and electrical conductivity online, as well as calculating the activity and fraction of ion pai...The mechanism of seeded precipitation of sodium aluminate solution was studied by measuring the seeded-precipitation rate and electrical conductivity online, as well as calculating the activity and fraction of ion pair. The results show that the electrical conductivity of sodium aluminate slurry linearly decreases with increasing aluminum hydroxide addition. Moreover, both the electrical conductivity of slurry and the difference in electrical conductivity between sodium aluminate solution and slurry remarkably decline in the first 60 min before gradually increasing in the preliminary 10 h and finally reaching almost the same level after 10 h. In low Na2 O concentration solution the activities of Na OH and Na Al（OH）4 in seeded precipitation are high, which can enlarge the difference in conductivity between slurry and solution. Additionally, more ion pairs exist in solution in preliminary seeded precipitation, and the adsorption of Na＋Al（OH）4- on seed surface is likely to break the equilibrium of ion pair formation and to decrease the difference in conductivity in preliminary seeded precipitation.展开更多
The electrical conductivity of NaF-AlF3-CaF2-Al2O3-ZrO2 system was studied by a tube-type cell with fixed cell constant. The results show that the electrical conductivity of NaF-AlF3-3%Al2O3-3%CaF2-ZrO2 molten salt sy...The electrical conductivity of NaF-AlF3-CaF2-Al2O3-ZrO2 system was studied by a tube-type cell with fixed cell constant. The results show that the electrical conductivity of NaF-AlF3-3%Al2O3-3%CaF2-ZrO2 molten salt system decreases with increase of ZrO2 content in an interval of 0-5%. The increase of 1%ZrO2 results in a corresponding electrical conductivity decrease of 0.02 S/cm, and the equivalent conductivity increases with the increase of molar ratio of NaF to AlF3. When the temperature increases by 1 °C, the electrical conductivity increases by 0.004 S/cm. At last, the regression equations of electrical conductivity relative to temperature and ZrO2 are obtained by quadratic regression analysis.展开更多
CuCrZr alloys were treated with the thermal stretch process at various temperatures from 100 to 300℃.The results reveal that the thermal stretch process is successfully developed to manufacture the precipitation hard...CuCrZr alloys were treated with the thermal stretch process at various temperatures from 100 to 300℃.The results reveal that the thermal stretch process is successfully developed to manufacture the precipitation hardening CuCrZr alloys with a good combination of microhardness and electrical conductivity.By increasing the tensile elongations at each temperature from 100 to 300℃,the microhardness increases whereas the electrical conductivity decreases slightly.Cr-containing precipitate phases with a Nishiyama-Wasserman orientation relationship to the copper matrix were observed by TEM.The achievement of high micro-hardness and acceptable electrical conductivity in the thermal stretch treated alloys is ascribed to the interactions of the heteroatom solution,dislocation increment,grain refinement and dispersive precipitation effect.展开更多
This study addresses the challenge of high sintering temperatures in proton-conducting fuel cells(PCFCs)with BaCeO_(3)-doped electrolytes.We demonstrate that 1 mol%copper(Cu)doping at the B-site of BaCe_(0.7)Zr_(0.1)(...This study addresses the challenge of high sintering temperatures in proton-conducting fuel cells(PCFCs)with BaCeO_(3)-doped electrolytes.We demonstrate that 1 mol%copper(Cu)doping at the B-site of BaCe_(0.7)Zr_(0.1)(Dy_(0.1)|Yb_(0.1))_(0.2)O_(3-δ)(BCZDYb)improves sintering behavior,enabling densification at1400℃.However,Cu doping disrupts stoichiometry,creating barium vacancies and reducing protonaccepting cations,affecting overall conductivity.This mechanism is confirmed through density functional theory(DFT)calculations and various experimental techniques,including crystal structure analysis using X-ray diffraction(XRD)and morphology and elemental analysis via field emission scanning electron microscopy(FESEM)and energy-dispersive X-ray spectroscopy(EDS).Electrochemical measurements are performed using the electrochemical impedance spectroscopy(EIS).The ionic conductivity of1 mol%Cu-doped BCZDYb(BCZDYb-1)is 1.49×10^(-2)S cm^(-1)at 650℃,which is~3.58 times higher than that of BCZDYb sintered at 1200℃.The BCZDYb-1 exhibits~16 times higher grain boundary conductivity when sintered at 1400℃,compared to undoped BCZDYb.The single cell employing BCZDYb-1 as the electrolyte achieved a power density of~606 mW cm^(-2)at 550℃.These results indicate that a controlled amount of Cu doping can enhance densification while maintaining high ionic co nductivity,making it suitable for practical applications in PCFCs operating at lower temperatures.展开更多
The ambient electrical conductivity (AEC) of carbon cathode materials was investigated in respect to their open porosity, crystal structure and graphite content using hydrostatic method, four-probe technique and X-ray...The ambient electrical conductivity (AEC) of carbon cathode materials was investigated in respect to their open porosity, crystal structure and graphite content using hydrostatic method, four-probe technique and X-ray diffraction (XRD), respectively. The AEC is proportional to the specific conductivity (σ0) and the exponential of (1?ε) (ε is porosity) by a quasi-uniform formula based on the percolation theory. Theσ0 can reflect the intrinsic conductivity of the carbon cathodes free of pores, and it depends on the mean crystallite size parallel to the layer (002). The exponentn is dependent on the materials nature of the cathode aggregates, while an averaged value, 4.65, can practically work well with 5 types of cathode materials. The calculation ofσ0 can be extended to the graphitic cathodes containing different aggregates using the simple rule of mixture.展开更多
As a fundamental study on recovery of valuable metals from nonferrous metallurgical slags,electrical conductivity values of MO（MO=FeO,NiO）-containing CaO-MgO-SiO2-Al2O3 slag with a low basicity were measured at diff...As a fundamental study on recovery of valuable metals from nonferrous metallurgical slags,electrical conductivity values of MO（MO=FeO,NiO）-containing CaO-MgO-SiO2-Al2O3 slag with a low basicity were measured at different temperatures using AC impedance spectroscopy.The result shows that the electrical conductivity increased from 1.4 S/m to 14.4 S/m with the increase of the temperature from 1 573 to 1 773 K and the content of MO which is less than 12% under the constant mass ratio of （CaO＋MgO） to （SiO2＋Al2O3） of 0.47.Moreover,the increase magnitude of the electrical conductivity was also promoted with the increase of the content of MO.The electrical conductivity of FeO-containing slags was close to that of NiO-containing slags when the content was less than 8%;however,it was obviously larger than that of NiO-containing slags when the content was 12%.The activation energy of the electrical conductivity decreased with the increase of MO content.展开更多
The relationship between the thermal/electrical conductivity enhancement in graphite nanoplatelets （GNPs） composites and the properties of filling graphite nanoplatelets is studied. The effective thermal and electri...The relationship between the thermal/electrical conductivity enhancement in graphite nanoplatelets （GNPs） composites and the properties of filling graphite nanoplatelets is studied. The effective thermal and electrical conductivity enhancements of GNP-oil nanofluids and GNP-polyimide composites are measured. By taking into account the particle shape, the volume fraction, the thermal conductivity of filling particles and the base fluids, the thermal and electrical conductivity enhancements of GNP nanofluids are theoretically predicted by the generalized effective medium theory. Both the nonlinear dependence of effective thermal conductivity on the GNP volume fraction in nanofhiids and the very low percolation threshold for GNP-polyimide composites are well predicted. The theoretical predications are found to be in reasonably good agreement with the experimental data. The generalized effective medium theory can be used for predicting the thermal and electrical properties of GNP composites and it is still available for most of the thermal/electrical modifications in two-phase composites.展开更多
Electrical conductivity of molten binary and ternary mixtures based on the system NaF-AlF3-SiO2 was investigated by means of a tube–cell （made of pyrolytic boron nitride） with stationary electrodes. Viscosity of th...Electrical conductivity of molten binary and ternary mixtures based on the system NaF-AlF3-SiO2 was investigated by means of a tube–cell （made of pyrolytic boron nitride） with stationary electrodes. Viscosity of the binary system Na3AlF6-SiO2 was measured by computerized torsion pendulum method. It was found that conductivity and viscosity varied linearly with temperature in all investigated mixtures. Obtained content dependence of electrical conductivity （isotherms） was divided into two parts. First, one represented the content region up to 10%（mole fraction） of SiO2;second, the region was with a higher content of SiO2 （from 10%up to 40%）. While the conductivity considerably decreased with content of SiO2 in the second part; it surprisingly rose in the low content range. A small addition of SiO2 to the molten cryolite （up to 10%） could slightly increase viscosity, but had no influence on the slope of this dependence since it is responsible for a glassy-networks formation in the melt. Further addition of SiO2 to the molten cryolite had a huge effect on the viscosity.展开更多
The effect of rare earth element Ce on mechanical performance and electrical conductivity of aluminum rod for electrical purpose were studied under industrial production condition. Using optical microscope, SEM, TEM, ...The effect of rare earth element Ce on mechanical performance and electrical conductivity of aluminum rod for electrical purpose were studied under industrial production condition. Using optical microscope, SEM, TEM, EDS and X-ray diffractometer, the microstructure and phase composition of aluminum rod were measured and analyzed. The results indicate that the content of rare earth element Ce is between 0.05% -0.16% in the aluminum rod for electrical purpose. Its tensile strength is enhanced to some extent. The research also discovers that the tensile strength is enhanced remarkably with impurity element Si content increases. Because influence of Si is big to the conductivity, the Si content should be controlled continuously strictly in the aluminum for electrical purpose. Adding rare earth element Ce reduces the solid solubility of Si in the aluminum matrix, and the negative effect of Si on the aluminum conductor reduces effectively. So the limit of in Si content in aluminum rod for electrical purpose can be relaxed moderately.展开更多
Natural soils of various types have different electrical properties due to the composition,structure,water content,and temperature.In order to investigate the electrical properties of lateritic soil,electrical conduct...Natural soils of various types have different electrical properties due to the composition,structure,water content,and temperature.In order to investigate the electrical properties of lateritic soil,electrical conductivity experiments have been conducted on a self-developed testing device.Test results show that the electrical conductivity of laterite increases with the increase of water content,degree of saturation and dry density.When the water content is below the optimum water content,the electrical conductivity of soils increases nonlinearly and the variation rate increases dramatically.However,when the water content,degree of saturation,or dry density increases to a certain value,the electrical conductivity tends to be a constant.In addition,soil electrical conductivity increases with the increase of temperature,and it is observed that the electrical conductivity decreases with the increase of the number of wetting–drying cycles.展开更多
基金supported by the National Natural Science Foundation of China(92163107,52171061,and 52371128)the National Key Research and Development Program of China(2022YFB3708800 and 2021YFB3501502).
文摘Immiscible bimetal systems,of which tungsten–copper(W–Cu)is a typical representative,have crucial applications in fields requiring both mechanical and physical properties.Nevertheless,it is a major challenge to determine how to give full play to the advantages of the two phases of the bimetal and achieve outstanding comprehensive properties.In this study,an ultrafine-grained W–Cu bimetal with spatially connected Cu and specific Wislands was fabricated through a designed powder-mixing process and subsequent rapid low-temperature sintering.The prepared bimetal concurrently has a high yield strength,large plastic strain,and high electrical conductivity.The stress distribution and strain response of individual phases in different types of W–Cu bimetals under loading were quantified by means of a simulation.The high yield strength of the reported bimetal results from the microstructure refinement and high contiguity of the grains in the W islands,which enhance the contribution of W to the total plastic deformation of the bimetal.The high electrical conductivity is attributed to the increased mean free path of the Cu and the reduced proportion of phase boundaries due to the specific phase combination of W islands and Cu.This work provides new insight into modulating phase configuration in immiscible metallic composites to achieve high-level multi-objective properties.
基金financially supported by Silesian University of Technology,Poland(No.11/030/BK_23/1127)V?B–Technical University of Ostrava Czech Republic(No.CZ.02.1.01/0.0/0.0/17_049/0008399)。
文摘The effects of forward extrusion as well as extrusion combined with reversible torsion(KoBo extrusion),followed by additional deformation via the MaxStrain module of the Gleeble thermomechanical simulator,on the microstructure,mechanical properties,and electrical conductivity of a Cu−0.7Mg(wt.%)alloy,were investigated.The simulation results highlighted the critical influence of processing history on determining the equivalent strain distribution.The sample subjected to forward extrusion at 400℃and subsequent MaxStrain processing(FM sample),possessed 76%lower grain size compared to the sample processed solely with MaxStrain(AM sample).Likewise,the KoBo-extruded and MaxStrain-processed sample(KM sample)exhibited 66%smaller grain size compared to the AM sample.Tensile test results revealed that the AM,FM,and KM samples,respectively,possessed 251%,288%,and 360%higher yield strength,and 95%,121%,and 169%higher tensile strength compared to the initial annealed alloy,as a result of grain refinement as well as deformation strengthening.Finally,the electrical conductivity measurements revealed that AM,FM,and KM samples,respectively,possessed electrical conductivity values of 37.9,35.6,and 32.0 MS/m,which,by considering their mechanical properties,makes them eligible to be categorized as high-strength and high-conductivity copper alloys.
基金funded by the National Natural Science Foundation of China(No.52202446)the Young Elite Scientists Sponsorship Program by CAST(No.2022QNRC001)+2 种基金the Young Elite Scientists Sponsorship Program by BAST(No.BYESS2023050)the Beijing Association for Science and Technology’s Golden-Bridge Seed Funding Program(No.ZZ22042)the Fundamental Research Funds for the Central Universities of China。
文摘Water electrolysis for hydrogen production offers a promising solution to future energy crises and environmental challenges.Although platinum is an efficient catalyst for hydrogen evolution reactions(HERs),its high cost and stability challenges limit its widespread use.A novel platinum-based catalyst,comprising platinum nanoparticles on nitrogen-doped porous graphite(Pt-N-porous graphite),addresses these limitations.This catalyst prevents nanoparticle aggregation,provides a high specific surface area of 1308 m^(2)g^(-1),and enhances mass transfer and active site exposure.Additionally,it exhibits superior electrical conductivity compared to commercial Pt-C,enhancing charge transfer efficiency.The Pt-N-porous graphite catalyst achieves an overpotential of 99 mV at 100 mA cm^(-2)and maintains stable performance after 10,000 cycles.Applied as a catalyst-coated membrane(CCM)in a proton exchange membrane(PEM)electrolyzer,it demonstrates excellent performance.Thus,the industrially synthesizable Pt-N-porous graphite catalyst holds great potential for large-scale energy applications.
基金supported by the Fundamental Research Funds for the Central Universities(No.20CX05005A)the Major Scientific and Technological Projects of CNPC(No.ZD2019-184-001)+2 种基金the PetroChina Innovation Foundation(No.2018D-5007-0214)the Shandong Provincial Natural Science Foundation(No.ZR2019MEE095)the National Natural Science Foundation of China(No.42174141).
文摘Clays have considerable influence on the electrical properties of hydrate-bearing sediments.It is desirable to understand the electrical properties of hydrate-bearing clayey sediments and to build hydrate saturation(S_(h))models for reservoir evaluation and monitoring.The electrical properties of tetrahydrofuran-hydrate-bearing sediments with montmorillonite are characterized by complex conductivity at frequencies from 0.01 Hz to 1 kHz.The effects of clay and Sh on the complex conductivity were analyzed.A decrease and increase in electrical conductance result from the clay-swelling-induced blockage and ion migration in the electrical double layer(EDL),respectively.The quadrature conductivity increases with the clay content up to 10%because of the increased surface site density of counterions in EDL.Both the in-phase conductivity and quadrature conductivity decrease consistently with increasing Sh from 0.50 to 0.90.Three sets of models for Sh evaluation were developed.The model based on the Simandoux equation outperforms Archie’s formula,with a root-mean-square error(E_(RMS))of 1.8%and 3.9%,respectively,highlighting the clay effects on the in-phase conductivity.The fre-quency effect correlations based on in-phase and quadrature conductivities exhibit inferior performance(E_(RMS)=11.6%and 13.2%,re-spectively)due to the challenge of choosing an appropriate pair of frequencies and intrinsic uncertainties from two measurements.The second-order Cole-Cole formula can be used to fit the complex-conductivity spectra.One pair of inverted Cole-Cole parameters,i.e.,characteristic time and chargeability,is employed to predict S_(h) with an E_(RMS) of 5.05%and 9.05%,respectively.
基金The authors are grateful for the support and funding from the Foundation of National Natural Science Foundation of China(52373089 and 51973173)Startup Foundation of Chongqing Normal University(23XLB011),Science and Technology Research Program of Chongqing Municipal Education Commission(KJQN202300561)Fundamental Research Funds for the Central Universities。
文摘With the rapid development of 5G information technology,thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent.In this work,“high-temperature solid-phase&diazonium salt decomposition”method is carried out to prepare benzidine-functionalized boron nitride(m-BN).Subsequently,m-BN/poly(pphenylene benzobisoxazole)nanofiber(PNF)nanocomposite paper with nacremimetic layered structures is prepared via sol–gel film transformation approach.The obtained m-BN/PNF nanocomposite paper with 50 wt%m-BN presents excellent thermal conductivity,incredible electrical insulation,outstanding mechanical properties and thermal stability,due to the construction of extensive hydrogen bonds andπ–πinteractions between m-BN and PNF,and stable nacre-mimetic layered structures.Itsλ∥andλ_(⊥)are 9.68 and 0.84 W m^(-1)K^(-1),and the volume resistivity and breakdown strength are as high as 2.3×10^(15)Ωcm and 324.2 kV mm^(-1),respectively.Besides,it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640°C,showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment.
基金supported by the Hunan Provincial Natural Science Foundation of China (Grant no.2023JJ30632)National Key R&D Program (Grant no.2022YFC2204403)Key R&D Program of Hunan Province (Grant no.2022GK2027)。
文摘Carbon nanotubes(CNTs)with high aspect ratio and excellent electrical conduction offer huge functional improvements for current carbon aerogels.However,there remains a major challenge for achieving the on-demand shaping of carbon aerogels with tailored micro-nano structural textures and geometric features.Herein,a facile extrusion 3D printing strategy has been proposed for fabricating CNT-assembled carbon(CNT/C)aerogel nanocomposites through the extrusion printing of pseudoplastic carbomer-based inks,in which the stable dispersion of CNT nanofibers has been achieved relying on the high viscosity of carbomer microgels.After extrusion printing,the chemical solidification through polymerizing RF sols enables 3D-printed aerogel nanocomposites to display high shape fidelity in macroscopic geometries.Benefiting from the micro-nano scale assembly of CNT nanofiber networks and carbon nanoparticle networks in composite phases,3D-printed CNT/C aerogels exhibit enhanced mechanical strength(fracture strength,0.79 MPa)and typical porous structure characteristics,including low density(0.220 g cm^(-3)),high surface area(298.4 m^(2)g^(-1)),and concentrated pore diameter distribution(~32.8nm).More importantly,CNT nanofibers provide an efficient electron transport pathway,imparting 3D-printed CNT/C aerogel composites with a high electrical conductivity of 1.49 S cm^(-1).Our work would offer feasible guidelines for the design and fabrication of shape-dominated functional materials by additive manufacturing.
基金supported by the National Natural Science Foundation of China(12371211,12126359)the postgraduate Scientific Research Innovation Project of Hunan Province(XDCX2022Y054,CX20220541).
文摘We study the global unique solutions to the 2-D inhomogeneous incompressible MHD equations,with the initial data(u0,B0)being located in the critical Besov space■and the initial densityρ0 being close to a positive constant.By using weighted global estimates,maximal regularity estimates in the Lorentz space for the Stokes system,and the Lagrangian approach,we show that the 2-D MHD equations have a unique global solution.
基金supported by the Natural Science Foundation of Jiangsu Province(BK20210379)the National Natural Science Foundation of China(grant Nos.42104110,42174161,and 12334019)the China Postdoctoral Science Foundation(2022M720989)。
文摘Understanding the effects of cracks on the elastic and electrical properties of tight carbonates is crucial for the exploration and development of deep and ultra-deep carbonate reservoirs.In this work,the porosity,electrical conductivity and ultrasonic velocities of two brine-saturated carbonate samples(where the pore space is dominated by cracks)are measured jointly at different effective pressures(5-90 MPa),as well as the velocities with saturating nitrogen at the same pressure conditions.The results show non-linear changes in the measured values,indicating a correlation with the presence of cracks.To analyze the pressure-dependent elastic and electrical properties,an approach combining a multiphase Kachanov model with a multiphase reformulated electrical differential effective medium(REDEM)model is proposed.This approach agrees well with the pressure-dependent experimental results of brine-saturated carbonate samples.The crack aspect ratio spectra are estimated using the experimental porosity as a constraint to improve the accuracy of the inverted crack geometry.The spectra from the elastic(electrical)inversion are input into the multiphase REDEM(Kachanov)model to predict the electrical conductivity(wave velocities).Comparisons with laboratory measurements show the ability of the proposed approach to estimate elastic wave velocities from the electrical conductivity using the inverted crack geometry,and vice versa.
基金supported substantially by the Southwest Jiaotong University for Material and Financial Support。
文摘Graphene(Gr)has unique properties including high electrical conductivity;Thus,graphene/copper(Gr/Cu)composites have attracted increasing attention to replace traditional Cu for electrical applications. However,the problem of how to control graphene to form desired Gr/Cu composite is not well solved. This paper aims at exploring the best parameters for preparing graphene with different layers on Cu foil by chemical vapor deposition(CVD)method and studying the effects of different layers graphene on Gr/Cu composite’s electrical conductivity. Graphene grown on single-sided and double-sided copper was prepared for Gr/Cu and Gr/Cu/Gr composites. The resultant electrical conductivity of Gr/Cu composites increased with decreasing graphene layers and increasing graphene volume fraction. The Gr/Cu/Gr composite with monolayer graphene owns volume fraction of less than 0.002%,producing the best electrical conductivity up to59.8 ×10^(6)S/m,equivalent to 104.5% IACS and 105.3% pure Cu foil.
基金Project supported by the National Natural Science Foundation of China(Nos.11972203 and 11572162)the Science and Technology Innovation 2025 Major Project of Ningbo City of China(No.2022Z209)Ningbo Key Technology Breakthrough Plan Project of“Science and Technology Innovation Yongjiang 2035”(No.2024Z256)。
文摘Carbon nanotubes(CNTs)have garnered great attention in recent years due to their outstanding electrical,thermal,and mechanical properties.The incorporation of small amounts of CNTs in polymers can substantially improve the sensitivity of the polymer's electrical conductivity.This paper presents a modified Maxwell model to evaluate the electrical conductivity of CNTs-filled polymer composites by introducing a transition zone to account for the tunneling effect.In this modified Maxwell model,the CNTs-filled polymer composite is modeled as a three-phase composite,consisting of a matrix(polymer),inclusions(CNTs),and a transition zone(tunneling zone).The effective electrical conductivity(EEC)of the composite is calculated based on the volume fractions and electrical conductivities of the matrix,inclusions,and transition zone.The model's validity is confirmed through the use of available test data,which demonstrates its capability to accurately capture the nonlinear conductivity behavior observed in CNTs-polymer composites.This study offers valuable insights into the design of high-performance conductive polymer nanocomposites,and enhances the understanding of electrical conduction mechanisms in CNT-dispersed polymer composites.
基金Project(51274242)supported by the National Natural Science Foundation of China
文摘The mechanism of seeded precipitation of sodium aluminate solution was studied by measuring the seeded-precipitation rate and electrical conductivity online, as well as calculating the activity and fraction of ion pair. The results show that the electrical conductivity of sodium aluminate slurry linearly decreases with increasing aluminum hydroxide addition. Moreover, both the electrical conductivity of slurry and the difference in electrical conductivity between sodium aluminate solution and slurry remarkably decline in the first 60 min before gradually increasing in the preliminary 10 h and finally reaching almost the same level after 10 h. In low Na2 O concentration solution the activities of Na OH and Na Al（OH）4 in seeded precipitation are high, which can enlarge the difference in conductivity between slurry and solution. Additionally, more ion pairs exist in solution in preliminary seeded precipitation, and the adsorption of Na＋Al（OH）4- on seed surface is likely to break the equilibrium of ion pair formation and to decrease the difference in conductivity in preliminary seeded precipitation.
基金Project (2007CB210305) supported by the National Basic Research Program of ChinaProject (51074045) supported by the National Natural Science Foundation of China
文摘The electrical conductivity of NaF-AlF3-CaF2-Al2O3-ZrO2 system was studied by a tube-type cell with fixed cell constant. The results show that the electrical conductivity of NaF-AlF3-3%Al2O3-3%CaF2-ZrO2 molten salt system decreases with increase of ZrO2 content in an interval of 0-5%. The increase of 1%ZrO2 results in a corresponding electrical conductivity decrease of 0.02 S/cm, and the equivalent conductivity increases with the increase of molar ratio of NaF to AlF3. When the temperature increases by 1 °C, the electrical conductivity increases by 0.004 S/cm. At last, the regression equations of electrical conductivity relative to temperature and ZrO2 are obtained by quadratic regression analysis.
基金Project(U1034002)supported by the National Natural Science Foundation of China(NSFC)-Guangdong Natural Science Mutual Funds
文摘CuCrZr alloys were treated with the thermal stretch process at various temperatures from 100 to 300℃.The results reveal that the thermal stretch process is successfully developed to manufacture the precipitation hardening CuCrZr alloys with a good combination of microhardness and electrical conductivity.By increasing the tensile elongations at each temperature from 100 to 300℃,the microhardness increases whereas the electrical conductivity decreases slightly.Cr-containing precipitate phases with a Nishiyama-Wasserman orientation relationship to the copper matrix were observed by TEM.The achievement of high micro-hardness and acceptable electrical conductivity in the thermal stretch treated alloys is ascribed to the interactions of the heteroatom solution,dislocation increment,grain refinement and dispersive precipitation effect.
基金supported by the National Key Research and Development Program of China(2021YFB4001400)the Cooperation Project of Shan-dong Energy Group Co.,Ltd.(20200871)supported by 111 Project 2.0(BP0618008).
文摘This study addresses the challenge of high sintering temperatures in proton-conducting fuel cells(PCFCs)with BaCeO_(3)-doped electrolytes.We demonstrate that 1 mol%copper(Cu)doping at the B-site of BaCe_(0.7)Zr_(0.1)(Dy_(0.1)|Yb_(0.1))_(0.2)O_(3-δ)(BCZDYb)improves sintering behavior,enabling densification at1400℃.However,Cu doping disrupts stoichiometry,creating barium vacancies and reducing protonaccepting cations,affecting overall conductivity.This mechanism is confirmed through density functional theory(DFT)calculations and various experimental techniques,including crystal structure analysis using X-ray diffraction(XRD)and morphology and elemental analysis via field emission scanning electron microscopy(FESEM)and energy-dispersive X-ray spectroscopy(EDS).Electrochemical measurements are performed using the electrochemical impedance spectroscopy(EIS).The ionic conductivity of1 mol%Cu-doped BCZDYb(BCZDYb-1)is 1.49×10^(-2)S cm^(-1)at 650℃,which is~3.58 times higher than that of BCZDYb sintered at 1200℃.The BCZDYb-1 exhibits~16 times higher grain boundary conductivity when sintered at 1400℃,compared to undoped BCZDYb.The single cell employing BCZDYb-1 as the electrolyte achieved a power density of~606 mW cm^(-2)at 550℃.These results indicate that a controlled amount of Cu doping can enhance densification while maintaining high ionic co nductivity,making it suitable for practical applications in PCFCs operating at lower temperatures.
基金Project(20110006110003)supported by the Research Fund for the Doctoral Program of Higher Education of ChinaProject(51434005)supported by the National Natural Science Foundation of China
文摘The ambient electrical conductivity (AEC) of carbon cathode materials was investigated in respect to their open porosity, crystal structure and graphite content using hydrostatic method, four-probe technique and X-ray diffraction (XRD), respectively. The AEC is proportional to the specific conductivity (σ0) and the exponential of (1?ε) (ε is porosity) by a quasi-uniform formula based on the percolation theory. Theσ0 can reflect the intrinsic conductivity of the carbon cathodes free of pores, and it depends on the mean crystallite size parallel to the layer (002). The exponentn is dependent on the materials nature of the cathode aggregates, while an averaged value, 4.65, can practically work well with 5 types of cathode materials. The calculation ofσ0 can be extended to the graphitic cathodes containing different aggregates using the simple rule of mixture.
基金Project(50574011) supported by the National Natural Science Foundation of China
文摘As a fundamental study on recovery of valuable metals from nonferrous metallurgical slags,electrical conductivity values of MO（MO=FeO,NiO）-containing CaO-MgO-SiO2-Al2O3 slag with a low basicity were measured at different temperatures using AC impedance spectroscopy.The result shows that the electrical conductivity increased from 1.4 S/m to 14.4 S/m with the increase of the temperature from 1 573 to 1 773 K and the content of MO which is less than 12% under the constant mass ratio of （CaO＋MgO） to （SiO2＋Al2O3） of 0.47.Moreover,the increase magnitude of the electrical conductivity was also promoted with the increase of the content of MO.The electrical conductivity of FeO-containing slags was close to that of NiO-containing slags when the content was less than 8%;however,it was obviously larger than that of NiO-containing slags when the content was 12%.The activation energy of the electrical conductivity decreased with the increase of MO content.
基金The National Natural Science Foundation of China(No.50906073,31070517)China Postdoctoral Science Foundation(No.20110491332)+1 种基金Jiangsu Planned Projects for Postdoctoral Research Funds(No.1101009B)the Science and Technology Development Plan of North Jiangsu(No.BC2012444)
文摘The relationship between the thermal/electrical conductivity enhancement in graphite nanoplatelets （GNPs） composites and the properties of filling graphite nanoplatelets is studied. The effective thermal and electrical conductivity enhancements of GNP-oil nanofluids and GNP-polyimide composites are measured. By taking into account the particle shape, the volume fraction, the thermal conductivity of filling particles and the base fluids, the thermal and electrical conductivity enhancements of GNP nanofluids are theoretically predicted by the generalized effective medium theory. Both the nonlinear dependence of effective thermal conductivity on the GNP volume fraction in nanofhiids and the very low percolation threshold for GNP-polyimide composites are well predicted. The theoretical predications are found to be in reasonably good agreement with the experimental data. The generalized effective medium theory can be used for predicting the thermal and electrical properties of GNP composites and it is still available for most of the thermal/electrical modifications in two-phase composites.
基金supported by the Science and Technology Assistance Agency (APVV-0460-10 and SK-CN-0029-12)Slovak Grant Agency (VEGA 2/0116/14 and VEGA 2/0095/12)+2 种基金the National Natural Science Foundation of China (51322406)the Program for New Century Excellent Talents (NCET-13-0107)Ministry of Education of China
文摘Electrical conductivity of molten binary and ternary mixtures based on the system NaF-AlF3-SiO2 was investigated by means of a tube–cell （made of pyrolytic boron nitride） with stationary electrodes. Viscosity of the binary system Na3AlF6-SiO2 was measured by computerized torsion pendulum method. It was found that conductivity and viscosity varied linearly with temperature in all investigated mixtures. Obtained content dependence of electrical conductivity （isotherms） was divided into two parts. First, one represented the content region up to 10%（mole fraction） of SiO2;second, the region was with a higher content of SiO2 （from 10%up to 40%）. While the conductivity considerably decreased with content of SiO2 in the second part; it surprisingly rose in the low content range. A small addition of SiO2 to the molten cryolite （up to 10%） could slightly increase viscosity, but had no influence on the slope of this dependence since it is responsible for a glassy-networks formation in the melt. Further addition of SiO2 to the molten cryolite had a huge effect on the viscosity.
基金Project supported by the Baotou Aluminum Co. Ltd.
文摘The effect of rare earth element Ce on mechanical performance and electrical conductivity of aluminum rod for electrical purpose were studied under industrial production condition. Using optical microscope, SEM, TEM, EDS and X-ray diffractometer, the microstructure and phase composition of aluminum rod were measured and analyzed. The results indicate that the content of rare earth element Ce is between 0.05% -0.16% in the aluminum rod for electrical purpose. Its tensile strength is enhanced to some extent. The research also discovers that the tensile strength is enhanced remarkably with impurity element Si content increases. Because influence of Si is big to the conductivity, the Si content should be controlled continuously strictly in the aluminum for electrical purpose. Adding rare earth element Ce reduces the solid solubility of Si in the aluminum matrix, and the negative effect of Si on the aluminum conductor reduces effectively. So the limit of in Si content in aluminum rod for electrical purpose can be relaxed moderately.
基金The fnancial supports from the National Natural Science Foundation of China(Grant No.51209196)the Science and Technology Project of Ministry of Transport of China(Grant No.20113184931700)
文摘Natural soils of various types have different electrical properties due to the composition,structure,water content,and temperature.In order to investigate the electrical properties of lateritic soil,electrical conductivity experiments have been conducted on a self-developed testing device.Test results show that the electrical conductivity of laterite increases with the increase of water content,degree of saturation and dry density.When the water content is below the optimum water content,the electrical conductivity of soils increases nonlinearly and the variation rate increases dramatically.However,when the water content,degree of saturation,or dry density increases to a certain value,the electrical conductivity tends to be a constant.In addition,soil electrical conductivity increases with the increase of temperature,and it is observed that the electrical conductivity decreases with the increase of the number of wetting–drying cycles.
