Lithium-ion batteries(LIBs)with the“double-high”characteristics of high energy density and high power density are in urgent demand for facilitating the development of advanced portable electronics.However,the lithiu...Lithium-ion batteries(LIBs)with the“double-high”characteristics of high energy density and high power density are in urgent demand for facilitating the development of advanced portable electronics.However,the lithium ion(Li+)-storage performance of the most commercialized lithium cobalt oxide(LiCoO_(2),LCO)cathodes is still far from satisfactory in terms of high-voltage and fast-charging capabilities for reaching the double-high target.Herein,we systematically summarize and discuss high-voltage and fast-charging LCO cathodes,covering in depth the key fundamental challenges,latest advancements in modification strategies,and future perspectives in this field.Comprehensive and elaborated discussions are first presented on key fundamental challenges related to structural degradation,interfacial instability,the inhomogeneity reactions,and sluggish interfacial kinetics.We provide an instructive summary of deep insights into promising modification strategies and underlying mechanisms,categorized into element doping(Li-site,cobalt-/oxygen-site,and multi-site doping)for improved Li+diffusivity and bulkstructure stability;surface coating(dielectrics,ionic/electronic conductors,and their combination)for surface stability and conductivity;nanosizing;combinations of these strategies;and other strategies(i.e.,optimization of the electrolyte,binder,tortuosity of electrodes,charging protocols,and prelithiation methods).Finally,forward-looking perspectives and promising directions are sketched out and insightfully elucidated,providing constructive suggestions and instructions for designing and realizing high-voltage and fast-charging LCO cathodes for next-generation double-high LIBs.展开更多
Using the molten salt and polyvinyl alcohol-protected reduction method,we fabricated Co3O4 octahedron-supported Au-Pd（x（AuPdy）/Co3O4;x =（0.18,0.47,and 0.96） wt%;y（Pd/Au molar ratio） =1.85-1.97） nanocatalysts.T...Using the molten salt and polyvinyl alcohol-protected reduction method,we fabricated Co3O4 octahedron-supported Au-Pd（x（AuPdy）/Co3O4;x =（0.18,0.47,and 0.96） wt%;y（Pd/Au molar ratio） =1.85-1.97） nanocatalysts.The molten salt-derived Co3O4 sample possessed well-defined octahedral morphology,with an edge length of 300 nm.The Au-Pd nanoparticles,with sizes of 2.7-3.2 nm,were uniformly dispersed on the surface of Co3O4.The 0.96（AuPd1.92）/Co3O4 sample showed the highest catalytic activity for toluene and o-xylene oxidation,and the temperature required for achieving 90%conversion of toluene and o-xylene was 180 and 187 ℃,respectively,at a space velocity of 40000 mL/（g·h）.The high catalytic performance of Co3O4 octahedron-supported Au-Pd nanocatalysts was associated with the interaction between Au-Pd nanoparticles and Co3O4 and high concentration of adsorbed oxygen species.展开更多
A promising Co3O4/Cu O composite electrode material was successfully synthesized through a facile hydrothermal and calcination process. Effects of the surfactants hexadecyltrimethyl ammonium bromide（CTAB） and polyvi...A promising Co3O4/Cu O composite electrode material was successfully synthesized through a facile hydrothermal and calcination process. Effects of the surfactants hexadecyltrimethyl ammonium bromide（CTAB） and polyvinylpyrrolidone（PVP） on the morphology and electrochemical performance of the composite were investigated. Powder X-ray diffraction（XRD）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM） and nitrogen adsorption-desorption experiment were employed to characterize the microstructures and morphologies of the composite. Meanwhile, the electrochemical performances of the samples were studied using cyclic voltammetry（CV）, galvanostatic charge-discharge test and electrochemical impedance spectroscopy（EIS）. The results show that the porous Co3O4/Cu O-CTAB nanoplates own the best performance and exhibits a high specific capacitance of 398 F/g at 1 A/g with almost 100% capacitance retention over 2000 cycles, and it retains 90% of capacitance at 10 A/g.展开更多
The reduced graphene oxide （rGO） supported cobalt oxide nanocatalysts were prepared by the conventional precipitationand hydrothermal method. The as-prepared rGO-Co3O4 was characterized by the XRD, Raman spectrum, S...The reduced graphene oxide （rGO） supported cobalt oxide nanocatalysts were prepared by the conventional precipitationand hydrothermal method. The as-prepared rGO-Co3O4 was characterized by the XRD, Raman spectrum, SEM, TEM, N2-sorption,UV-Vis, XPS and H2-TPR measurements. The results show that the spinel cobalt oxide nanoparticles are highly fragmented on therGO support and possess uniform particle size, and the as-prepared catalysts possess high specific surface area and narrow pore sizedistribution. The catalytic properties of the as-prepared rGO-Co3O4 catalysts for CO oxidation were evaluated through acontinuous-flow fixed-bed microreactor-gas chromatograph system. The catalyst with 30% （mass fraction） reduced graphene oxideexhibits the highest activity for CO complete oxidation at 100 ℃.展开更多
Surface engineering of active materials to generate desired energy state is critical to fabricate high-performance heterogeneous catalysts.However, its realization in a controllable level remains challenging. Using ox...Surface engineering of active materials to generate desired energy state is critical to fabricate high-performance heterogeneous catalysts.However, its realization in a controllable level remains challenging. Using oxygen evolution reaction(OER) as a model reaction, we report a surface-mediated Fe deposition strategy to electronically tailor surface energy states of porous Co_(3)O_(4)(Fe-pCo_(3)O_(4)) for enhanced activity towards OER. The Fe-pCo_(3)O_(4) exhibits a low overpotential of 280 mV to reach an OER current density of 100 mA cm^(-2), and a fast-kinetic behavior with a low Tafel slop of 58.2 mV dec^(-1), outperforming Co_(3)O_(4)-based OER catalysts recently reported and also the noble IrO_(2). The engineered material retains 100% of its original activity after operating at an overpotential of 350 m V for 100 h. A combination of theoretical calculations and experimental results finds out that the surface doped Fe promotes a high energy state and desired coordination environment in the near surface region, which enables optimized OER intermediates binding and favorably changes the rate-determining step.展开更多
Electrochemical nitrate reduction to ammonia(NRA) can realize the green synthesis of ammonia(NH3) at ambient conditions, and also remove nitrate contamination in water. However, the current catalysts for NRA still fac...Electrochemical nitrate reduction to ammonia(NRA) can realize the green synthesis of ammonia(NH3) at ambient conditions, and also remove nitrate contamination in water. However, the current catalysts for NRA still face relatively low NH3yield rate and poor stability. We present here a core-shell heterostructure comprising cobalt oxide anchored on copper oxide nanowire arrays(CuO NWAs@Co_(3)O_(4)) for efficient NRA. The CuO NWAs@Co_(3)O_(4)demonstrates significantly enhanced NRA performance in alkaline media in comparison with plain CuO NWAs and Co_(3)O_(4)flocs. Especially, at-0.23 V vs. RHE, NH_(3) yield rate of the CuO NWAs@Co_(3)O_(4)reaches 1.915 mmol h^(-1)cm^(-2),much higher than those of CuO NWAs(1.472 mmol h^(-1)cm^(-2)), Co_(3)O_(4)flocs(1.222 mmol h^(-1)cm^(-2)) and recent reported Cu-based catalysts.It is proposed that the synergetic effects of the heterostructure combing atom hydrogen adsorption and nitrate reduction lead to the enhanced NRA performance.展开更多
Lithium cobalt oxide(LCO)is the dominating cathode materials for lithium-ion batteries(LIBs)deployed in consumer electronic devices for its superior volumetric energy density and electrochemical performances.The const...Lithium cobalt oxide(LCO)is the dominating cathode materials for lithium-ion batteries(LIBs)deployed in consumer electronic devices for its superior volumetric energy density and electrochemical performances.The constantly increasing demands of higher energy density urge to develop high-voltage LCO via a variety of strategies.However,the corresponding modification mechanism,especially the influence of the long-and short-range structural transitions at high-voltage on electrochemical performance,is still not well understood and needs further exploration.Based on ss-NMR,in-situ X-ray diffraction,and electrochemical performance results,it is revealed that the H3 to H1-3 phase transition dictates the structural reversibility and stability of LCO,thereby determining the electrochemical performance.The introduction of La and Al ions could postpone the appearance of H1-3 phase and induce various types of local environments to alleviate the volume variation at the atomic level,leading to better reversibility of the H1-3 phase and smaller lattice strain,and significantly improved cycle performance.Such a comprehensive long-range,local,and electronic structure characterization enables an in-depth understanding of the structural evolution of LCO,providing a guiding principle for developing high-voltage LCO for high energy density LIBs.展开更多
The selective catalytic hydrogenation of carboxylic acids is an important process for alcohol production,while efficient heterogeneous catalyst systems are still being explored.Here,we report the selective hydrogenati...The selective catalytic hydrogenation of carboxylic acids is an important process for alcohol production,while efficient heterogeneous catalyst systems are still being explored.Here,we report the selective hydrogenation of carboxylic acids using earth‐abundant cobalt oxides through a reaction‐controlled catalysis process.The further reaction of the alcohols is completely hindered by the presence of carboxylic acids in the reaction system.The partial reduction of cobalt oxides by hydrogen at designated temperatures can dramatically enhance the catalytic activity of pristine samples.A wide range of carboxylic acids with a variety of functional groups can be converted to the corresponding alcohols at a yield level applicable to large‐scale production.Cobalt monoxide was established as the preferred active phase for the selective hydrogenation of carboxylic acids.展开更多
A method was developed for the simultaneous determination of seven trace impurities (Cd, Mn, Pb, Zn, Cu, Fe and Ni) in high purity cobalt oxide by ICP AES. The matrix effect was eliminated by preci pitation with 1 nit...A method was developed for the simultaneous determination of seven trace impurities (Cd, Mn, Pb, Zn, Cu, Fe and Ni) in high purity cobalt oxide by ICP AES. The matrix effect was eliminated by preci pitation with 1 nitroso 2 naphthol. The matrix effect of cobalt on the absorptions of trace impurities, the effects of reaction time, pH value, dosage of precipitant on the formation of cobalt 1 nitroso 2 naphthol complex, the effects of hydrochloric acid on the stability of this complex and masking of elements were studied. Recoveries of the impurities in spiked sample are from 90% to 110% with a precision of 1.1% 5.0% RSD. The detection limits of the seven elements are in the range of 0.01 0.24μg/g. The method can be applied to the analysis of high purity cobalt metal, cobalt oxide and other cobalt compounds.展开更多
A series of alumina supported cobalt oxide based catalysts doped with noble metals such as ruthenium and platinum were prepared by wet impregnation method.The variables studied were difference ratio and calcination te...A series of alumina supported cobalt oxide based catalysts doped with noble metals such as ruthenium and platinum were prepared by wet impregnation method.The variables studied were difference ratio and calcination temperatures.Pt/Co(10∶90)/Al2O3 catalyst calcined at 700 ℃ was found to be the best catalyst which able to convert 70.10% of CO2 into methane with 47% of CH4 formation at maximum temperature studied of 400 ℃.X-ray diffraction analysis showed that this catalyst possessed the active site Co3O4 in face-centered cubic and PtO2 in the orthorhombic phase with Al2O3 existed in the cubic phase.According to the FESEM micrographs,both fresh and spent Pt/Co(10∶90)/Al2O3 catalysts displayed small particle size with undefined shape.Nitrogen Adsorption analysis showed that 5.50% reduction of the total surface area for the spent Pt/Co(10∶90)/Al2O3 catalyst.Meanwhile,Energy Dispersive X-ray analysis(EDX) indicated that Co and Pt were reduced by 0.74% and 0.14% respectively on the spent Pt/Co(10∶90)/Al2O3catalyst.Characterization using FT-IR and TGA-DTA analysis revealed the existence of residual nitrate and hydroxyl compounds on the Pt/Co(10∶90)/Al2O3 catalyst.展开更多
The high performance of an electrode relies largely on a scrupulous design of nanoarchitectures and smart hybridization of electroactive materials.A porous core-shell architecture in which one-dimensional cobalt oxide...The high performance of an electrode relies largely on a scrupulous design of nanoarchitectures and smart hybridization of electroactive materials.A porous core-shell architecture in which one-dimensional cobalt oxide(Co_3O_4)nanowire cores are grown on nickel foam prior to the growth of layered double hydroxide(LDH)shells is fabricated.Hydrothermal precipitation and thermal treatment result in homogeneous forests of 70-nm diameter Co_3O_4 nanowire,which are wrapped in LDH-nanosheet-built porous covers through a liquid phase deposition method.Due to the unique core-shell architecture and the synergetic effects of Co_3O_4and NiAl-LDH,the obtained Co_3O_4@LDH electrode exhibits a capacitance of 1 133.3F/g at a current density of 2A/g and 688.8F/g at 20A/g(5.3F/cm^(2 )at 9.4mA/cm^(2 )and 3.2F/cm^(2 )at 94mA/cm^2),which are better than those of the individual Co_3O_4nanowire.Moreover,the electrode shows excellent cycling performance with a retention rate of 90.4%after 3 000cycles at a current density of 20A/g.展开更多
Although lithium(Li)metal delivers the highest theoretical capacity as a battery anode,its high reactivity can generate Li dendrites and"dead"Li during cycling,resulting in poor reversibility and low Li util...Although lithium(Li)metal delivers the highest theoretical capacity as a battery anode,its high reactivity can generate Li dendrites and"dead"Li during cycling,resulting in poor reversibility and low Li utilization.Inducing uniform Li plating/stripping is the core of solving these problems.Herein,we design a highly lithiophilic carbon film with an outer sheath of the nanoneedle arrays to induce homogeneous Li plating/stripping.The excellent conductivity and 3D framework of the carbon film not only offer fast charge transport across the entire electrode but also mitigate the volume change of Li metal during cycling.The abundant lithiophilic sites ensure stable Li plating/stripping,thereby inhibiting the Li dendritic growth and"dead"Li formation.The resulting composite anode allows for stable Li stripping/plating under 0.5 mA cm^(-2) with a capacity of 0.5 mA h cm^(-2) for 4000 h and 3 mA cm^(-2) with a capacity of3 mA h cm^(-2) for 1000 h.The Ex-SEM analysis reveals that lithiophilic property is different at the bottom,top,or channel in the structu re,which can regulate a bottom-up uniform Li deposition behavior.Full cells paired with LFP show a stable capacity of 155 mA h g^(-1) under a current density of 0.5C.The pouch cell can keep powering light-emitting diode even under 180°bending,suggesting its good flexibility and great practical applications.展开更多
Octahedral CoO with nanostructures decorated with Ag nanoparticles was prepared via a facile solvothermal approach. After being annealed at 500 ℃ for 1 h, an electrochemical capacitor material of Co3O4 decorated with...Octahedral CoO with nanostructures decorated with Ag nanoparticles was prepared via a facile solvothermal approach. After being annealed at 500 ℃ for 1 h, an electrochemical capacitor material of Co3O4 decorated with Ag2O was obtained. The cyclic voltammetry and galvanostatic charge-discharge were used to evaluate the electrochemical properties of the as-prepared products. The results indicated that the as-prepared samples exhibited fine pseudo-capacitive performance, and the surface modifications of Ag2O can significantly increase the capacitance of the Co3O4 material. The specific capacitance of Ag2O/Co3O4 composite electrode was up to 217.6 F·g^-1, which was 3.35 times as high as that of pure Co3O4. Moreover, Ag2O/Co3O4 composite showed an excellent cycle performance, and 65.3% of specific capacitance was maintained after 200 cycles.展开更多
Heteroatom-doped transition metal oxides have attracted great attention as advanced anode materials for lithium-ion batteries due to their high theoretical capacity and superior properties.However,the limited resource...Heteroatom-doped transition metal oxides have attracted great attention as advanced anode materials for lithium-ion batteries due to their high theoretical capacity and superior properties.However,the limited resource availability has led to a substantial rise in prices for valuable metals such as Ni and Co,posing a significant challenge for their application.To address this issue,recycling of these metals from waste materials have gained prominence,and particularly the recovery of Co has been mostly focused on its economic benefits.Herein,we introduced a novel recycling strategy for fabrication of heteroatomdoped CoO_(x)(comprising mainly Co_(3)O_(4)with a minor CoO phase)anode with a yolk–shell structure for lithium-ion batteries,by separating Co from cemented tungsten carbide waste.By employing a simple leaching process and subsequent spray pyrolysis,the yolk–shell structured microsphere comprising CoO_(x)was successfully synthesized.Moreover,the presence of other waste metals in the leachate facilitated multi-heteroatom doping during synthesis.Interestingly,the introduction of various dopants into CoO_(x)induced oxygen vacancy formation,thereby enhancing the electrochemical properties of the CoO_(x)anode.As a result,compared with the phase-pure(undoped)CoO_(x)yolk–shell,the heteroatom-doped CoO_(x)yolk–shell exhibited robust cycling stability(602 mAh·g^(-1)for 200 cycles at 1 A·g^(-1))and excellent rate capability(210 mAh·g^(-1)at 10 A·g^(-1)).展开更多
Lithium cobalt oxide(LCO),the first commercialized cathode active material for lithium-ion batteries,is known for high voltage and capacity.However,its application has been limited by relatively low capacity and stabi...Lithium cobalt oxide(LCO),the first commercialized cathode active material for lithium-ion batteries,is known for high voltage and capacity.However,its application has been limited by relatively low capacity and stability at high C-rates.Reducing particle size is considered one of the most straightforward and effective strategies to enhance ion transfer,thus increasing the rate performance.However,side reactions are simultaneously enhanced as the specific surface area increases.Herein,we investigate the impact of LCO particles with varying size distributions and optimize the particle size.To modulate the side reactions associated with particle size reduction,an ultrathin carbon nanotube film(UCNF)is introduced to coat the cathode surface.With this simple process and optimized particle size,the rate performance improves significantly,normal commercial LCO achieves 118 mA·h·g^(−1)at 3.0–4.3 V and 20 C(0.72 mA·h·cm^(−2)),corresponding to power density of 8732 W·kg^(−1).This method is applied to high voltage as well,152 mA·h·g^(−1)at 3.0–4.6 V and 20 C(0.99 mA·h·cm^(−2))was achieved with high-voltage LCO(HVLCO),corresponding to power density of 11,552 W·kg^(−1).The cycling stability is also enhanced,with the capacity retention maintaining more than 96%after 100 cycles at 0.1 C.For the first time,UCNF is demonstrated to suppress the excessive decomposition of the electrolytes and solvents by blocking electron injection/extraction between LCO and electrolyte solution.Our findings provide a simple method for improving LCO rate performance,especially at high C-rates.展开更多
Cyclohexanol is an important intermediate in the synthesis of Nylon-6 and plasticizers. In this work,cobalt oxide nanoparticles（NPs） supported on porous carbon（Co Ox@CN） were fabricated by one-pot method and the h...Cyclohexanol is an important intermediate in the synthesis of Nylon-6 and plasticizers. In this work,cobalt oxide nanoparticles（NPs） supported on porous carbon（Co Ox@CN） were fabricated by one-pot method and the hybrids could efficiently and selectively hydrogenate phenol to cyclohexanol with a high yield of 98%. The high catalytic performance of Co Ox@CN was associate with the high surface area（340 m2/g） and uniformly dispersed NPs. Furthurmore, by detailed analysing the relationship between catalytic activity and catalysts composition, it clearly indicated that the Co3O4 in Co Ox@CN played an important role for the adsorption and activation of phenol and the in situ gernerated Co was responsible for hydrogen adsorption and dissociation. These findings provide a fundamental insight into the real active sites in hydrogenation of phenol using Co-based catalysts.展开更多
The catalytic performances of different commercial cobalt oxides（CoxOy, i.e., Co2O3, Co3O4, and CoO） for peroxymonosulfate（PMS） activation in dye degradation were compared in this study. The CoO/PMS system exhibit...The catalytic performances of different commercial cobalt oxides（CoxOy, i.e., Co2O3, Co3O4, and CoO） for peroxymonosulfate（PMS） activation in dye degradation were compared in this study. The CoO/PMS system exhibited the highest catalytic oxidation performances with more than 96% methylene bhie（MB） removal at 90 rain. The concentration of dissolved cobalt ions from CoO was 1.474 mg/L at neutral pH and 5.231 mg/L at acidic pH at 90 rain which accounted for the high MB removal and CoO activated PMS homogeneously compared to the associated CoSO4/PMS. Co304 and Co203 exhibited similar catalytic performances and characteristics. The MB removal in Co3OffPMS and Co203/PMS system were more than 88% at neutral pH and over 64% at acidic pH, respectively, in 90 rain. The concentration of dissolved cobalt ions from Co3O4 and Co2O3 was less than 0.018 mg/L at neutral pH and 0.036 mg/L at acidic pH at 90 rain. The MB removal achieved by Co3O4/PMS and Co2O3/PMS were approximately three time higher than that achieved by their associated CoSO4/PMS systems and the heterogeneous cataly played a principal role in the processes. According to scavenger experiments, the contributions of the hydroxyl radicals in the MB degradation were negligible compared to sulfate radicals in the CoO/PMS system, Hydroxyl radicals contributed one-third or more and sulfate radicals were the dominant oxidizing species in the Co3O4/PMS and Co20]PMS systems. COxOy could also effectively activate PMS to generate free radicals for degradation of other dyes. The dyedegradation processes in Co3O4/PMS, Co2O3/PMS and Co3O4/PMS systems followed pseudo-first-order kinetic model and dye degradation rates in different systems were also compared.展开更多
Lithium cobalt oxide （LiCoO2） was synthesized by carbon combustion synthesis （CCS） using carbon as fuel. X-ray diffraction （XRD） and scanning electron microscope （SEM） measurements showed that carbon combustio...Lithium cobalt oxide （LiCoO2） was synthesized by carbon combustion synthesis （CCS） using carbon as fuel. X-ray diffraction （XRD） and scanning electron microscope （SEM） measurements showed that carbon combustion led to the formation of layered structure of LiCoO2 and the particle size could be controlled by carbon content. For the LiCoO2 sample prepared at 800℃ for 2 h, at molar ratio of C/Co = 0.5, the particle-size distribution fell in the narrow range of 3-5 μm. Electrochemical tests indicated this LiCoO2 sample delivered an initial discharge capacity of 148 mAh/g with capacity retention rate higher than 97% after 10 cycles.展开更多
Improving the evaporation rate and energy efficiency of solar steam generation is very important to facilitate real-world applications for clean water production.In this work,Co_(3)O_(4)@polydopamine(PDA)nanoparticles...Improving the evaporation rate and energy efficiency of solar steam generation is very important to facilitate real-world applications for clean water production.In this work,Co_(3)O_(4)@polydopamine(PDA)nanoparticles were synthesized and combined with reduced graphene oxide(rGO)to fabricate a new Co_(3)O_(4)@PDA-rGO photothermal aerogel.The obtained pho-tothermal aerogel sheet was thereafter used to prepare both two-dimensional(2D)and three-dimensional(3D)photothermal evaporators for solar steam generation.Due to the excellent light absorption and hydrophilicity of the photothermal aerogel,a high evaporation rate of 1.60 kg·m^(−2)·h^(−1) was achieved for the 2D photothermal evaporator.While for the 3D evaporator,the evaporation rate was dramatically increased to 3.71 kg·m^(−2)·h^(−1) with a corresponding light-to-vapor energy efficiency of 107%.This was attributed to an increased evaporation surface area,decreased energy loss from the top evaporation surface to the environment,and energy gain from the environment on the side evaporation surface.The 3D evaporator also showed excellent practical performance in seawater desalination thus demonstrating great potential for real-world applications.展开更多
A nanocomposite that incorporates cobalt oxide（Co3O4） and nanodiamond（ND） can present both high magnetism（Co3O4） and high hardness（ND）. ND particles have potential applications in a variety of fields such as p...A nanocomposite that incorporates cobalt oxide（Co3O4） and nanodiamond（ND） can present both high magnetism（Co3O4） and high hardness（ND）. ND particles have potential applications in a variety of fields such as protein immobilization, biosensors, therapeutic molecule delivery and bio-imaging. However,limited information is available in literature on the in-situ synthesis of biocompatible magnetic materials and also on their potential biotoxicity as a result of their entry into environmental compartments and subsequent interaction with biota. In this work, a new kind of bio-compatible magnetic material –carboxylated nanodiamond（c ND） and Co3O4 was synthesized to obtain the c ND-Co3O4 nanocomposite.The synthesis procedure involved in-situ and chemical reduction of cobalt chloride（CoCl（26）H2O） and sodium borohydrate（NaBH4）. The synthesized cND-Co3O4 nanocomposite was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. The cyto-genotoxicity of the synthesized nanocomposite material was studied by using onion（Allium cepa L.） as a test model with concentrations of 5, 10 and 20 μg/ml. The study was also extended to cND and Co3O4 materials for comparison purpose. Co3O4 and cND exhibited their contrasting effects on mitosis and other cyto-genotoxic indices studied herein. This work provided fundamental data on the synthesis and the bio-toxicity of the c ND-Co3O4 nanocomposite, which, in turn, can help to expand their multidisciplinary applications.展开更多
基金supported by the National Key Research and Development Program of China(2022YFA1504100)the National Natural Science Foundation of China(22125903,51872283,and 22005298)+4 种基金Dalian Innovation Support Plan for High Level Talents(2019RT09)Dalian National Laboratory For Clean Energy(DNL),Chinese Academy of Sciences(CAS),DNL Cooperation Fund,CAS(DNL202016 and DNL202019)Dalian Institute of Chemical Physics(DICP I2020032)Exploratory Research Project of Yanchang Petroleum International Limited and DICP(yc-hw-2022ky-01)the Joint Fund of the Yulin University and the Dalian National Laboratory for Clean Energy(YLU-DNL Fund 2021002 and 2021009).
文摘Lithium-ion batteries(LIBs)with the“double-high”characteristics of high energy density and high power density are in urgent demand for facilitating the development of advanced portable electronics.However,the lithium ion(Li+)-storage performance of the most commercialized lithium cobalt oxide(LiCoO_(2),LCO)cathodes is still far from satisfactory in terms of high-voltage and fast-charging capabilities for reaching the double-high target.Herein,we systematically summarize and discuss high-voltage and fast-charging LCO cathodes,covering in depth the key fundamental challenges,latest advancements in modification strategies,and future perspectives in this field.Comprehensive and elaborated discussions are first presented on key fundamental challenges related to structural degradation,interfacial instability,the inhomogeneity reactions,and sluggish interfacial kinetics.We provide an instructive summary of deep insights into promising modification strategies and underlying mechanisms,categorized into element doping(Li-site,cobalt-/oxygen-site,and multi-site doping)for improved Li+diffusivity and bulkstructure stability;surface coating(dielectrics,ionic/electronic conductors,and their combination)for surface stability and conductivity;nanosizing;combinations of these strategies;and other strategies(i.e.,optimization of the electrolyte,binder,tortuosity of electrodes,charging protocols,and prelithiation methods).Finally,forward-looking perspectives and promising directions are sketched out and insightfully elucidated,providing constructive suggestions and instructions for designing and realizing high-voltage and fast-charging LCO cathodes for next-generation double-high LIBs.
基金supported by the National Natural Science Foundation of China (21377008, 21477005, U1507108)National High Technology Re-search and Development Program of China (2015AA034603)+1 种基金Beijing Nova Program (Z141109001814106)Natural Science Foundation of Bei-jing Municipal Commission of Education (KM201410005008)~~
文摘Using the molten salt and polyvinyl alcohol-protected reduction method,we fabricated Co3O4 octahedron-supported Au-Pd（x（AuPdy）/Co3O4;x =（0.18,0.47,and 0.96） wt%;y（Pd/Au molar ratio） =1.85-1.97） nanocatalysts.The molten salt-derived Co3O4 sample possessed well-defined octahedral morphology,with an edge length of 300 nm.The Au-Pd nanoparticles,with sizes of 2.7-3.2 nm,were uniformly dispersed on the surface of Co3O4.The 0.96（AuPd1.92）/Co3O4 sample showed the highest catalytic activity for toluene and o-xylene oxidation,and the temperature required for achieving 90%conversion of toluene and o-xylene was 180 and 187 ℃,respectively,at a space velocity of 40000 mL/（g·h）.The high catalytic performance of Co3O4 octahedron-supported Au-Pd nanocatalysts was associated with the interaction between Au-Pd nanoparticles and Co3O4 and high concentration of adsorbed oxygen species.
基金Project(21471162)supported by the National Natural Science Foundation of ChinaProject(2014LY36)supported by the Science and Technology Project of Longyan CityChina
文摘A promising Co3O4/Cu O composite electrode material was successfully synthesized through a facile hydrothermal and calcination process. Effects of the surfactants hexadecyltrimethyl ammonium bromide（CTAB） and polyvinylpyrrolidone（PVP） on the morphology and electrochemical performance of the composite were investigated. Powder X-ray diffraction（XRD）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM） and nitrogen adsorption-desorption experiment were employed to characterize the microstructures and morphologies of the composite. Meanwhile, the electrochemical performances of the samples were studied using cyclic voltammetry（CV）, galvanostatic charge-discharge test and electrochemical impedance spectroscopy（EIS）. The results show that the porous Co3O4/Cu O-CTAB nanoplates own the best performance and exhibits a high specific capacitance of 398 F/g at 1 A/g with almost 100% capacitance retention over 2000 cycles, and it retains 90% of capacitance at 10 A/g.
基金Projects(51404097,51504083,21404033)supported by the National Natural Science Foundation of ChinaProject(2016M592290)supported by China Postdoctoral Science Foundation+5 种基金Project(NSFRF1606)supported by the Fundamental Research Funds for the Universities of Henan Province,ChinaProjects(J2016-2,J2017-3)supported by Foundation for Distinguished Young Scientists of Henan Polytechnic University,ChinaProject(16A150009)supported by the Key Scientific Research Project for Higher Education of Henan Province,ChinaProject(166115)supported by the Postdoctoral Science Foundation of Henan Province,ChinaProject(17HASTIT029)supported by Program for Science&Technology Innovation Talents in Universities of Henan Province,ChinaProjects(162300410113,162300410119)supported by Natural Science Foundation of Henan Province of China
文摘The reduced graphene oxide （rGO） supported cobalt oxide nanocatalysts were prepared by the conventional precipitationand hydrothermal method. The as-prepared rGO-Co3O4 was characterized by the XRD, Raman spectrum, SEM, TEM, N2-sorption,UV-Vis, XPS and H2-TPR measurements. The results show that the spinel cobalt oxide nanoparticles are highly fragmented on therGO support and possess uniform particle size, and the as-prepared catalysts possess high specific surface area and narrow pore sizedistribution. The catalytic properties of the as-prepared rGO-Co3O4 catalysts for CO oxidation were evaluated through acontinuous-flow fixed-bed microreactor-gas chromatograph system. The catalyst with 30% （mass fraction） reduced graphene oxideexhibits the highest activity for CO complete oxidation at 100 ℃.
基金financially supported by National Natural Science Foundation of China (21972102)Natural Science Foundation of Jiangsu province (BK20200991)+3 种基金Suzhou Science and Technology Planning Project (SS202016)Jiangsu Laboratory for Biochemical Sensing and BiochipJiangsu Key Laboratory for Micro and Nano Heat Fluid Flow Technology and Energy ApplicationCollaborative Innovation Center of Water Treatment Technology & Material。
文摘Surface engineering of active materials to generate desired energy state is critical to fabricate high-performance heterogeneous catalysts.However, its realization in a controllable level remains challenging. Using oxygen evolution reaction(OER) as a model reaction, we report a surface-mediated Fe deposition strategy to electronically tailor surface energy states of porous Co_(3)O_(4)(Fe-pCo_(3)O_(4)) for enhanced activity towards OER. The Fe-pCo_(3)O_(4) exhibits a low overpotential of 280 mV to reach an OER current density of 100 mA cm^(-2), and a fast-kinetic behavior with a low Tafel slop of 58.2 mV dec^(-1), outperforming Co_(3)O_(4)-based OER catalysts recently reported and also the noble IrO_(2). The engineered material retains 100% of its original activity after operating at an overpotential of 350 m V for 100 h. A combination of theoretical calculations and experimental results finds out that the surface doped Fe promotes a high energy state and desired coordination environment in the near surface region, which enables optimized OER intermediates binding and favorably changes the rate-determining step.
基金the financial support from National Natural Science Foundation of China (No. 21972102)National Key Research and Development Program of China (2021YFA0910400)+3 种基金Natural Science Foundation of Jiangsu Province (BK20200991)Suzhou Science and Technology Planning Project (SS202016)the USTS starting fund (No.332012104)the Natural Science Foundation of Suzhou University of Science and Technology (No.342134401)。
文摘Electrochemical nitrate reduction to ammonia(NRA) can realize the green synthesis of ammonia(NH3) at ambient conditions, and also remove nitrate contamination in water. However, the current catalysts for NRA still face relatively low NH3yield rate and poor stability. We present here a core-shell heterostructure comprising cobalt oxide anchored on copper oxide nanowire arrays(CuO NWAs@Co_(3)O_(4)) for efficient NRA. The CuO NWAs@Co_(3)O_(4)demonstrates significantly enhanced NRA performance in alkaline media in comparison with plain CuO NWAs and Co_(3)O_(4)flocs. Especially, at-0.23 V vs. RHE, NH_(3) yield rate of the CuO NWAs@Co_(3)O_(4)reaches 1.915 mmol h^(-1)cm^(-2),much higher than those of CuO NWAs(1.472 mmol h^(-1)cm^(-2)), Co_(3)O_(4)flocs(1.222 mmol h^(-1)cm^(-2)) and recent reported Cu-based catalysts.It is proposed that the synergetic effects of the heterostructure combing atom hydrogen adsorption and nitrate reduction lead to the enhanced NRA performance.
基金funded by the National Natural Science Foundation of China(grant no.21761132030,21935009)National Key Research and Development Program of China(grant no.2016YFB0901502,2018YFB0905400)Collaboration project between Ningde City&Xiamen University(2017c002)。
文摘Lithium cobalt oxide(LCO)is the dominating cathode materials for lithium-ion batteries(LIBs)deployed in consumer electronic devices for its superior volumetric energy density and electrochemical performances.The constantly increasing demands of higher energy density urge to develop high-voltage LCO via a variety of strategies.However,the corresponding modification mechanism,especially the influence of the long-and short-range structural transitions at high-voltage on electrochemical performance,is still not well understood and needs further exploration.Based on ss-NMR,in-situ X-ray diffraction,and electrochemical performance results,it is revealed that the H3 to H1-3 phase transition dictates the structural reversibility and stability of LCO,thereby determining the electrochemical performance.The introduction of La and Al ions could postpone the appearance of H1-3 phase and induce various types of local environments to alleviate the volume variation at the atomic level,leading to better reversibility of the H1-3 phase and smaller lattice strain,and significantly improved cycle performance.Such a comprehensive long-range,local,and electronic structure characterization enables an in-depth understanding of the structural evolution of LCO,providing a guiding principle for developing high-voltage LCO for high energy density LIBs.
文摘The selective catalytic hydrogenation of carboxylic acids is an important process for alcohol production,while efficient heterogeneous catalyst systems are still being explored.Here,we report the selective hydrogenation of carboxylic acids using earth‐abundant cobalt oxides through a reaction‐controlled catalysis process.The further reaction of the alcohols is completely hindered by the presence of carboxylic acids in the reaction system.The partial reduction of cobalt oxides by hydrogen at designated temperatures can dramatically enhance the catalytic activity of pristine samples.A wide range of carboxylic acids with a variety of functional groups can be converted to the corresponding alcohols at a yield level applicable to large‐scale production.Cobalt monoxide was established as the preferred active phase for the selective hydrogenation of carboxylic acids.
文摘A method was developed for the simultaneous determination of seven trace impurities (Cd, Mn, Pb, Zn, Cu, Fe and Ni) in high purity cobalt oxide by ICP AES. The matrix effect was eliminated by preci pitation with 1 nitroso 2 naphthol. The matrix effect of cobalt on the absorptions of trace impurities, the effects of reaction time, pH value, dosage of precipitant on the formation of cobalt 1 nitroso 2 naphthol complex, the effects of hydrochloric acid on the stability of this complex and masking of elements were studied. Recoveries of the impurities in spiked sample are from 90% to 110% with a precision of 1.1% 5.0% RSD. The detection limits of the seven elements are in the range of 0.01 0.24μg/g. The method can be applied to the analysis of high purity cobalt metal, cobalt oxide and other cobalt compounds.
文摘A series of alumina supported cobalt oxide based catalysts doped with noble metals such as ruthenium and platinum were prepared by wet impregnation method.The variables studied were difference ratio and calcination temperatures.Pt/Co(10∶90)/Al2O3 catalyst calcined at 700 ℃ was found to be the best catalyst which able to convert 70.10% of CO2 into methane with 47% of CH4 formation at maximum temperature studied of 400 ℃.X-ray diffraction analysis showed that this catalyst possessed the active site Co3O4 in face-centered cubic and PtO2 in the orthorhombic phase with Al2O3 existed in the cubic phase.According to the FESEM micrographs,both fresh and spent Pt/Co(10∶90)/Al2O3 catalysts displayed small particle size with undefined shape.Nitrogen Adsorption analysis showed that 5.50% reduction of the total surface area for the spent Pt/Co(10∶90)/Al2O3 catalyst.Meanwhile,Energy Dispersive X-ray analysis(EDX) indicated that Co and Pt were reduced by 0.74% and 0.14% respectively on the spent Pt/Co(10∶90)/Al2O3catalyst.Characterization using FT-IR and TGA-DTA analysis revealed the existence of residual nitrate and hydroxyl compounds on the Pt/Co(10∶90)/Al2O3 catalyst.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea funded by the Ministry of Education,Science and Technology (No.2014R1A1A2055740)the Start-up Research Grant(No.SRG2015-00057-FST)
文摘The high performance of an electrode relies largely on a scrupulous design of nanoarchitectures and smart hybridization of electroactive materials.A porous core-shell architecture in which one-dimensional cobalt oxide(Co_3O_4)nanowire cores are grown on nickel foam prior to the growth of layered double hydroxide(LDH)shells is fabricated.Hydrothermal precipitation and thermal treatment result in homogeneous forests of 70-nm diameter Co_3O_4 nanowire,which are wrapped in LDH-nanosheet-built porous covers through a liquid phase deposition method.Due to the unique core-shell architecture and the synergetic effects of Co_3O_4and NiAl-LDH,the obtained Co_3O_4@LDH electrode exhibits a capacitance of 1 133.3F/g at a current density of 2A/g and 688.8F/g at 20A/g(5.3F/cm^(2 )at 9.4mA/cm^(2 )and 3.2F/cm^(2 )at 94mA/cm^2),which are better than those of the individual Co_3O_4nanowire.Moreover,the electrode shows excellent cycling performance with a retention rate of 90.4%after 3 000cycles at a current density of 20A/g.
基金supported by the National Natural Science Foundation of China(31870570)the Science and Technology Plan of Fujian Provincial,China(2020H4026,2022G02020 and 2022H6002)+1 种基金the Science and Technology Plan of Xiamen(3502Z20203005)the Scientific Research Start-up Funding for Special Professor of Minjiang Scholars。
文摘Although lithium(Li)metal delivers the highest theoretical capacity as a battery anode,its high reactivity can generate Li dendrites and"dead"Li during cycling,resulting in poor reversibility and low Li utilization.Inducing uniform Li plating/stripping is the core of solving these problems.Herein,we design a highly lithiophilic carbon film with an outer sheath of the nanoneedle arrays to induce homogeneous Li plating/stripping.The excellent conductivity and 3D framework of the carbon film not only offer fast charge transport across the entire electrode but also mitigate the volume change of Li metal during cycling.The abundant lithiophilic sites ensure stable Li plating/stripping,thereby inhibiting the Li dendritic growth and"dead"Li formation.The resulting composite anode allows for stable Li stripping/plating under 0.5 mA cm^(-2) with a capacity of 0.5 mA h cm^(-2) for 4000 h and 3 mA cm^(-2) with a capacity of3 mA h cm^(-2) for 1000 h.The Ex-SEM analysis reveals that lithiophilic property is different at the bottom,top,or channel in the structu re,which can regulate a bottom-up uniform Li deposition behavior.Full cells paired with LFP show a stable capacity of 155 mA h g^(-1) under a current density of 0.5C.The pouch cell can keep powering light-emitting diode even under 180°bending,suggesting its good flexibility and great practical applications.
基金Funded by National Natural Science Foundation of China(Nos.51502005,51602005,11647001 and 11404005)Key Foundation for Young Talents in College of Anhui Province(Nos.gxyq ZD2016081,2013SQRL026ZD)Open Foundation for Cooperative Innovation Research Center for Weak Signal-Detecting Materials and Devices Integration(No.01001795-201403)
文摘Octahedral CoO with nanostructures decorated with Ag nanoparticles was prepared via a facile solvothermal approach. After being annealed at 500 ℃ for 1 h, an electrochemical capacitor material of Co3O4 decorated with Ag2O was obtained. The cyclic voltammetry and galvanostatic charge-discharge were used to evaluate the electrochemical properties of the as-prepared products. The results indicated that the as-prepared samples exhibited fine pseudo-capacitive performance, and the surface modifications of Ag2O can significantly increase the capacitance of the Co3O4 material. The specific capacitance of Ag2O/Co3O4 composite electrode was up to 217.6 F·g^-1, which was 3.35 times as high as that of pure Co3O4. Moreover, Ag2O/Co3O4 composite showed an excellent cycle performance, and 65.3% of specific capacitance was maintained after 200 cycles.
基金financially supported by the National Research Foundation of Korea(NRF)from the Korea Government(MEST,No.NRF-2022R1F1A1070886MSIT,No.RS2023-00217581)the Commercialization Promotion Agency for R&D Outcomes(COMPA)from the Korea Government(MEST,No.1711175258)。
文摘Heteroatom-doped transition metal oxides have attracted great attention as advanced anode materials for lithium-ion batteries due to their high theoretical capacity and superior properties.However,the limited resource availability has led to a substantial rise in prices for valuable metals such as Ni and Co,posing a significant challenge for their application.To address this issue,recycling of these metals from waste materials have gained prominence,and particularly the recovery of Co has been mostly focused on its economic benefits.Herein,we introduced a novel recycling strategy for fabrication of heteroatomdoped CoO_(x)(comprising mainly Co_(3)O_(4)with a minor CoO phase)anode with a yolk–shell structure for lithium-ion batteries,by separating Co from cemented tungsten carbide waste.By employing a simple leaching process and subsequent spray pyrolysis,the yolk–shell structured microsphere comprising CoO_(x)was successfully synthesized.Moreover,the presence of other waste metals in the leachate facilitated multi-heteroatom doping during synthesis.Interestingly,the introduction of various dopants into CoO_(x)induced oxygen vacancy formation,thereby enhancing the electrochemical properties of the CoO_(x)anode.As a result,compared with the phase-pure(undoped)CoO_(x)yolk–shell,the heteroatom-doped CoO_(x)yolk–shell exhibited robust cycling stability(602 mAh·g^(-1)for 200 cycles at 1 A·g^(-1))and excellent rate capability(210 mAh·g^(-1)at 10 A·g^(-1)).
基金supported by the National Key R&D Program of China(Nos.2018YFA0208402 and 2020YFA0714700)the National Natural Science Foundation of China(Nos.11634014 and 51372269)the“Strategic Priority Research Program”of the Chinese Academy of Sciences(No.XDA09040202).
文摘Lithium cobalt oxide(LCO),the first commercialized cathode active material for lithium-ion batteries,is known for high voltage and capacity.However,its application has been limited by relatively low capacity and stability at high C-rates.Reducing particle size is considered one of the most straightforward and effective strategies to enhance ion transfer,thus increasing the rate performance.However,side reactions are simultaneously enhanced as the specific surface area increases.Herein,we investigate the impact of LCO particles with varying size distributions and optimize the particle size.To modulate the side reactions associated with particle size reduction,an ultrathin carbon nanotube film(UCNF)is introduced to coat the cathode surface.With this simple process and optimized particle size,the rate performance improves significantly,normal commercial LCO achieves 118 mA·h·g^(−1)at 3.0–4.3 V and 20 C(0.72 mA·h·cm^(−2)),corresponding to power density of 8732 W·kg^(−1).This method is applied to high voltage as well,152 mA·h·g^(−1)at 3.0–4.6 V and 20 C(0.99 mA·h·cm^(−2))was achieved with high-voltage LCO(HVLCO),corresponding to power density of 11,552 W·kg^(−1).The cycling stability is also enhanced,with the capacity retention maintaining more than 96%after 100 cycles at 0.1 C.For the first time,UCNF is demonstrated to suppress the excessive decomposition of the electrolytes and solvents by blocking electron injection/extraction between LCO and electrolyte solution.Our findings provide a simple method for improving LCO rate performance,especially at high C-rates.
基金Financial support from the key program supported by the Natural Science Foundation of Zhejiang Province, China (No. LZ18B060002)the National Natural Science Foundation of China (No. 21622308)+2 种基金the Specialized Research Fund for the Doctoral Program of Higher Education (No. J20130060)the Fundamental Research Funds for the Central Universitiesthe Program for Zhejiang Leading Team of S&T Innovation are greatly appreciated
文摘Cyclohexanol is an important intermediate in the synthesis of Nylon-6 and plasticizers. In this work,cobalt oxide nanoparticles（NPs） supported on porous carbon（Co Ox@CN） were fabricated by one-pot method and the hybrids could efficiently and selectively hydrogenate phenol to cyclohexanol with a high yield of 98%. The high catalytic performance of Co Ox@CN was associate with the high surface area（340 m2/g） and uniformly dispersed NPs. Furthurmore, by detailed analysing the relationship between catalytic activity and catalysts composition, it clearly indicated that the Co3O4 in Co Ox@CN played an important role for the adsorption and activation of phenol and the in situ gernerated Co was responsible for hydrogen adsorption and dissociation. These findings provide a fundamental insight into the real active sites in hydrogenation of phenol using Co-based catalysts.
基金Supported by the National Natural Science Foundation of China（No.21307005） and the National Specific Project of Water Pollution Control and Disposal in China（No.2014ZX07201-010 ）.
文摘The catalytic performances of different commercial cobalt oxides（CoxOy, i.e., Co2O3, Co3O4, and CoO） for peroxymonosulfate（PMS） activation in dye degradation were compared in this study. The CoO/PMS system exhibited the highest catalytic oxidation performances with more than 96% methylene bhie（MB） removal at 90 rain. The concentration of dissolved cobalt ions from CoO was 1.474 mg/L at neutral pH and 5.231 mg/L at acidic pH at 90 rain which accounted for the high MB removal and CoO activated PMS homogeneously compared to the associated CoSO4/PMS. Co304 and Co203 exhibited similar catalytic performances and characteristics. The MB removal in Co3OffPMS and Co203/PMS system were more than 88% at neutral pH and over 64% at acidic pH, respectively, in 90 rain. The concentration of dissolved cobalt ions from Co3O4 and Co2O3 was less than 0.018 mg/L at neutral pH and 0.036 mg/L at acidic pH at 90 rain. The MB removal achieved by Co3O4/PMS and Co2O3/PMS were approximately three time higher than that achieved by their associated CoSO4/PMS systems and the heterogeneous cataly played a principal role in the processes. According to scavenger experiments, the contributions of the hydroxyl radicals in the MB degradation were negligible compared to sulfate radicals in the CoO/PMS system, Hydroxyl radicals contributed one-third or more and sulfate radicals were the dominant oxidizing species in the Co3O4/PMS and Co20]PMS systems. COxOy could also effectively activate PMS to generate free radicals for degradation of other dyes. The dyedegradation processes in Co3O4/PMS, Co2O3/PMS and Co3O4/PMS systems followed pseudo-first-order kinetic model and dye degradation rates in different systems were also compared.
基金The authors appreciate the financial support of Natural Science Foundation of Guangxi （No. 0731010）.
文摘Lithium cobalt oxide （LiCoO2） was synthesized by carbon combustion synthesis （CCS） using carbon as fuel. X-ray diffraction （XRD） and scanning electron microscope （SEM） measurements showed that carbon combustion led to the formation of layered structure of LiCoO2 and the particle size could be controlled by carbon content. For the LiCoO2 sample prepared at 800℃ for 2 h, at molar ratio of C/Co = 0.5, the particle-size distribution fell in the narrow range of 3-5 μm. Electrochemical tests indicated this LiCoO2 sample delivered an initial discharge capacity of 148 mAh/g with capacity retention rate higher than 97% after 10 cycles.
基金This work was financially supported by Australian Research Council(Grant no.FT190100485)the Future Industries Institute,University of South Australia(RTIS Scholarship).
文摘Improving the evaporation rate and energy efficiency of solar steam generation is very important to facilitate real-world applications for clean water production.In this work,Co_(3)O_(4)@polydopamine(PDA)nanoparticles were synthesized and combined with reduced graphene oxide(rGO)to fabricate a new Co_(3)O_(4)@PDA-rGO photothermal aerogel.The obtained pho-tothermal aerogel sheet was thereafter used to prepare both two-dimensional(2D)and three-dimensional(3D)photothermal evaporators for solar steam generation.Due to the excellent light absorption and hydrophilicity of the photothermal aerogel,a high evaporation rate of 1.60 kg·m^(−2)·h^(−1) was achieved for the 2D photothermal evaporator.While for the 3D evaporator,the evaporation rate was dramatically increased to 3.71 kg·m^(−2)·h^(−1) with a corresponding light-to-vapor energy efficiency of 107%.This was attributed to an increased evaporation surface area,decreased energy loss from the top evaporation surface to the environment,and energy gain from the environment on the side evaporation surface.The 3D evaporator also showed excellent practical performance in seawater desalination thus demonstrating great potential for real-world applications.
基金the financial support from Foundation for the Science and Technology(FCT,Portugal)the funding through the post-doctoral grant SFRH/BPD/100003/2014(LSS)+3 种基金the 2013 FCT Investigator programme(MKS).NAA(SFRH/BPD/84671/2012)EP gratefully acknowledge the partial financial supports received from FCT(Government of Portugal)the Aveiro University Research Institute/CESAM(UID/AMB/50017/2013)“COMPETE”through Project no.FCOMP-01-0124-FEDER-02800(FCT PTDC/AGR-PRO/4091/2012)
文摘A nanocomposite that incorporates cobalt oxide（Co3O4） and nanodiamond（ND） can present both high magnetism（Co3O4） and high hardness（ND）. ND particles have potential applications in a variety of fields such as protein immobilization, biosensors, therapeutic molecule delivery and bio-imaging. However,limited information is available in literature on the in-situ synthesis of biocompatible magnetic materials and also on their potential biotoxicity as a result of their entry into environmental compartments and subsequent interaction with biota. In this work, a new kind of bio-compatible magnetic material –carboxylated nanodiamond（c ND） and Co3O4 was synthesized to obtain the c ND-Co3O4 nanocomposite.The synthesis procedure involved in-situ and chemical reduction of cobalt chloride（CoCl（26）H2O） and sodium borohydrate（NaBH4）. The synthesized cND-Co3O4 nanocomposite was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy. The cyto-genotoxicity of the synthesized nanocomposite material was studied by using onion（Allium cepa L.） as a test model with concentrations of 5, 10 and 20 μg/ml. The study was also extended to cND and Co3O4 materials for comparison purpose. Co3O4 and cND exhibited their contrasting effects on mitosis and other cyto-genotoxic indices studied herein. This work provided fundamental data on the synthesis and the bio-toxicity of the c ND-Co3O4 nanocomposite, which, in turn, can help to expand their multidisciplinary applications.
