The research investigated application effects of alcohol-based fuels in in- tensive curing. The results showed that alcohol-based fuels allow flexible adjustment of temperature and heat supplying. What＇s more, in tre...The research investigated application effects of alcohol-based fuels in in- tensive curing. The results showed that alcohol-based fuels allow flexible adjustment of temperature and heat supplying. What＇s more, in treatment A, the cured tobac- cos are softer and brighter, with more oil content and higher proportion of first-class tobaccos. Per leaf weight increased by 0.13 g and output value per kang （a heat- able brick bed） deducting energy cost grew by 188.66 yuan. In addition, the con- tents of reducing sugar and potassium enhanced within the ranges of high-quality tobacco, and chemical components are more coordinated.展开更多
Through the preparation of PVDF membranes using various nonsolvent coagulation baths following the phase inversion process, the influence of alcohol-based nonsolvents on the formation and structure of PVDF membranes w...Through the preparation of PVDF membranes using various nonsolvent coagulation baths following the phase inversion process, the influence of alcohol-based nonsolvents on the formation and structure of PVDF membranes were investigated. The light scattering and light transmission measurements were used to characterize the equilibrium phase diagram and the gelation speed, respectively. The locations of the crystallization-induced gelation boundaries for various systems and precipitation processes were explained from the corresponding thermodynamic and kinetic parameters. It was found that the better affinity between alcohol-based nonsolvents and DMAc solvent caused the gelation boundaries further away from the PVDF-DMAc axis with the coagulation bath varying from water, methanol, ethanol to iso-propanol. Due to the lower exchange rate of DMAc and alcohols, the delayed demixing took place for the membrane-forming using alcohols as baths, and the delayed time became longer when the coagulation bath was changed from methanol, ethanol to iso-propanol. The characterization results of membranes indicate that the influence of nonsolvents on the phase diagram and the precipitation process are in agreement with those on the membrane morphology. The better thermodynamic stability and a low exchange diffusion rate of PVDF/DMAc/alcohols favor the liquid-solid phase separation in gelation process, and therefore yield the membranes with a porous upper surface, a particular bottom surface and symmetrical structure.展开更多
A study for further improving the suspension rate of alcohol-based coatings using a new nano-dispersing agent has been presented in this paper. The results of experiments show that the new nano-dispersing agent should...A study for further improving the suspension rate of alcohol-based coatings using a new nano-dispersing agent has been presented in this paper. The results of experiments show that the new nano-dispersing agent should be used in combination with organic auxiliary agent which significantly increases the suspension effect of alcohol-based coatings. By the methods, the suspension rates of 99%, 98%, 96% and 94% can be achieved at 2h, 2h, 48h and 72h, respectively. These alcohol-based coatings have characters of higher strength, lower gas evolution, better brush ability and no blister after ignition.展开更多
基金Supported by Longyan Tobacco Company S&T Project(2014-18)~~
文摘The research investigated application effects of alcohol-based fuels in in- tensive curing. The results showed that alcohol-based fuels allow flexible adjustment of temperature and heat supplying. What＇s more, in treatment A, the cured tobac- cos are softer and brighter, with more oil content and higher proportion of first-class tobaccos. Per leaf weight increased by 0.13 g and output value per kang （a heat- able brick bed） deducting energy cost grew by 188.66 yuan. In addition, the con- tents of reducing sugar and potassium enhanced within the ranges of high-quality tobacco, and chemical components are more coordinated.
基金This work was support by the National Basic Research Program of China (No. 2003CB615705)the national Natural Science Foundation of China (No. 50433010)
文摘Through the preparation of PVDF membranes using various nonsolvent coagulation baths following the phase inversion process, the influence of alcohol-based nonsolvents on the formation and structure of PVDF membranes were investigated. The light scattering and light transmission measurements were used to characterize the equilibrium phase diagram and the gelation speed, respectively. The locations of the crystallization-induced gelation boundaries for various systems and precipitation processes were explained from the corresponding thermodynamic and kinetic parameters. It was found that the better affinity between alcohol-based nonsolvents and DMAc solvent caused the gelation boundaries further away from the PVDF-DMAc axis with the coagulation bath varying from water, methanol, ethanol to iso-propanol. Due to the lower exchange rate of DMAc and alcohols, the delayed demixing took place for the membrane-forming using alcohols as baths, and the delayed time became longer when the coagulation bath was changed from methanol, ethanol to iso-propanol. The characterization results of membranes indicate that the influence of nonsolvents on the phase diagram and the precipitation process are in agreement with those on the membrane morphology. The better thermodynamic stability and a low exchange diffusion rate of PVDF/DMAc/alcohols favor the liquid-solid phase separation in gelation process, and therefore yield the membranes with a porous upper surface, a particular bottom surface and symmetrical structure.
文摘A study for further improving the suspension rate of alcohol-based coatings using a new nano-dispersing agent has been presented in this paper. The results of experiments show that the new nano-dispersing agent should be used in combination with organic auxiliary agent which significantly increases the suspension effect of alcohol-based coatings. By the methods, the suspension rates of 99%, 98%, 96% and 94% can be achieved at 2h, 2h, 48h and 72h, respectively. These alcohol-based coatings have characters of higher strength, lower gas evolution, better brush ability and no blister after ignition.
