期刊文献+
共找到16,750篇文章
< 1 2 250 >
每页显示 20 50 100
Structure variation of cadmium naphthalene⁃diphosphonates with the changing rigidity of N⁃donor auxiliary ligands
1
作者 XU Yan LI Suzhi +3 位作者 LI Yan FENG Lushun SUN Wentao LI Xinxing 《无机化学学报》 北大核心 2025年第2期395-406,共12页
Five cadmium naphthalene-diphosphonates,formulated as[Cd_(1.5)(1,4-ndpaH_(2))2(4,4'-bpyH)(4,4'-bpy)0.5(H_(2)O)_(2)]2(1),[Cd(1,4-ndpaH_(2))(1,4-bib)0.5(H_(2)O)](2),[Cd(1,4-ndpaH3)2(1,2-dpe)(H_(2)O)]·(1,2-d... Five cadmium naphthalene-diphosphonates,formulated as[Cd_(1.5)(1,4-ndpaH_(2))2(4,4'-bpyH)(4,4'-bpy)0.5(H_(2)O)_(2)]2(1),[Cd(1,4-ndpaH_(2))(1,4-bib)0.5(H_(2)O)](2),[Cd(1,4-ndpaH3)2(1,2-dpe)(H_(2)O)]·(1,2-dpe)·7H_(2)O(3),(1,2-bixH)[Cd3(1,4-ndpaH)(1,4-ndpaH_(2))2(H_(2)O)_(2)](4),and[Cd(1,4-ndpaH_(2))(H_(2)O)]·H_(2)O(5),have been synthesized from the selfassembly reactions of 1,4-naphthalenediphosphonic acid(1,4-ndpaH4)with Cd(NO3)2·4H_(2)O by introducing auxiliary ligands with variation of rigidity,such as 4,4'-bipyridine(4,4'-bpy),1,4-bis(1-imidazolyl)benzene(1,4-bib),1,2-di(4-pyridyl)ethylene(1,2-dpe),1,3-di(4-pyridyl)propane(1,3-dpp),and bis(imidazol-1-ylmethyl)benzene(1,2-bix),respectively.Structure resolution by single-crystal X-ray diffraction reveals that compound 1 possesses a layered framework,in which the{Cd3(PO2)2}trimers made up of corner-sharing two{CdO4N2}and one{CdO6}octahedra are connected by phosphonate groups,forming a ribbon,which are cross-linked by 4,4'-bipy ligands,forming a 2D layer.Compound 2 shows a 3D open-framework structure,where chains of corner-sharing{CdO4N}trigonal bipyramids and{PO3C}tetrahedra are cross-linked by 1,4-bib and/or phosphonate groups.A 1D ladder-like chain structure is found in compound 3,where the ladder-like chains made up of corner-sharing{CdO5N}octahedra and{PO3C}tetra hedra are connected by 1,4-ndpaH_(2)^(2-).Both compounds 4 and 5 obtained by the introduction of flexible ligands during the synthesis show a 2D layered structure,which is formed by ligand crosslinking double metal chains.Interestingly,In 4,flexible 1,2-bix was singly protonated,as vip molecules,filled between layer and layer,while flexible ligand 1,3-dpp is absent in 5.Photophysical measurements indicate that compounds 1-5 show ligand-centered emissions. 展开更多
关键词 naphthalene diphosphate N-donor auxiliary ligands crystal structure RIGIDITY flexibility
在线阅读 下载PDF
基于ACGAN与SO-RF的变压器故障诊断方法
2
作者 金玲珠 史正方 +3 位作者 曹红 胡宇凯 薛露佳 吴同宇 《电气技术与经济》 2025年第1期375-379,共5页
针对变压器故障样本类别不平衡导致对少数类样本误判、漏判问题,提出一种基于ACGAN与SO-RF的变压器故障诊断方法。首先,通过辅助分类条件生成对抗网络方法(Auxiliary Classifier Generative Adversarial Networks,ACGAN)对不平衡小样本... 针对变压器故障样本类别不平衡导致对少数类样本误判、漏判问题,提出一种基于ACGAN与SO-RF的变压器故障诊断方法。首先,通过辅助分类条件生成对抗网络方法(Auxiliary Classifier Generative Adversarial Networks,ACGAN)对不平衡小样本进行扩充,得到均衡且扩充过的数据;其次,采用无编码比值法构造18维故障特征,并结合核主成分分析法(Kernel Principal Component Analysis,KPCA)进行特征融合;最后,利用蛇群优化算法(Snake Optimizer,SO)对随机森林(Random Forest,RF)模型的参数寻优,进而实现变压器故障诊断。结果表明,本文所提方法可以在不平衡小样本条件下减少对少数类样本的误判和漏判,进一步提升了模型的诊断精度。 展开更多
关键词 变压器 故障诊断 不平衡小样本 acgan 随机森林 蛇群优化算法
在线阅读 下载PDF
小样本下基于改进ACGAN数据增强的X射线矿石图像分类方法 被引量:1
3
作者 王文 何剑锋 +6 位作者 朱文松 李卫东 聂逢君 夏菲 汪雪元 钟国韵 瞿金辉 《有色金属工程》 CAS 北大核心 2024年第3期122-132,共11页
针对工业领域利用深度学习模型对矿石进行在线分类时,矿石样本稀少导致的模型过拟合、分类准确率低的问题,提出一种结合X射线透射成像技术的矿石数据增强分类方法。该方法基于改进辅助生成对抗网络(Enhance-based Classification ACGAN-... 针对工业领域利用深度学习模型对矿石进行在线分类时,矿石样本稀少导致的模型过拟合、分类准确率低的问题,提出一种结合X射线透射成像技术的矿石数据增强分类方法。该方法基于改进辅助生成对抗网络(Enhance-based Classification ACGAN-gp, EC-ACGAN-gp),采用卷积和连续残差块构建判别器和生成器,引入注意力机制捕捉矿石细节特征,生成高质量样本扩充原始数据集,同时使用带梯度惩罚的Wasserstein距离重构判别器的损失函数提高对抗训练的稳定性,避免模式崩溃。通过增加辅助分类器重建样本标签信息,最终实现矿石样本的类别预测。结果表明,该方法能实现矿石品位分类的精准预测,准确率可达89.62%,比现有传统方法提高3.98%。该模型生成的矿石样本泛化性良好,能够显著提高小样本数据集的泛化性,在SVM、LeNet5、VGGNet、ResNet上测试,精度分别提升了2.83%、2.36%、1.89%和3.74%,可进一步用于提升其他分类模型在矿石品位预测方面的性能。 展开更多
关键词 矿石分类 小样本 数据增强 辅助生成对抗网络 X射线成像 自注意力机制
在线阅读 下载PDF
基于CVAE-ACGAN特征生成模型的轴承故障诊断
4
作者 付元 《煤矿机械》 2024年第1期152-155,共4页
针对传统故障特征生成模型在学习训练时具备不可控性、单一性和收敛速度慢的缺点从而导致故障诊断模型的诊断效果不理想的问题,通过将条件变分自动编码器(CVAE)模型可结合故障数据的类别属性进行隐含特征提取的优势与辅助分类生成式对... 针对传统故障特征生成模型在学习训练时具备不可控性、单一性和收敛速度慢的缺点从而导致故障诊断模型的诊断效果不理想的问题,通过将条件变分自动编码器(CVAE)模型可结合故障数据的类别属性进行隐含特征提取的优势与辅助分类生成式对抗网络(ACGAN)模型较好的提取类条件特征能力相结合,创新性地提出CVAE-ACGAN特征生成模型。在提高生成特征质量的基础上,兼顾模型的收敛速度和抗干扰能力。以公开轴承数据集作为数据源,与4种特征生成模型的故障诊断效果进行对比。结果表明,CVAE-ACGAN模型可在实际故障诊断中对故障数据集进行有效的扩充,进而提高故障诊断的精确度。 展开更多
关键词 轴承 CVAE acgan 特征生成 故障诊断
在线阅读 下载PDF
Ascertaining the influences of auxiliary qubits on the Einstein–Podolsky–Rosen steering and its directions
5
作者 邢玲玲 杨欢 +1 位作者 张刚 孔敏 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第5期213-221,共9页
Einstein–Podolsky–Rosen(EPR) steering is an example of nontrivial quantum nonlocality and characteristic in the non-classical world.The directivity(or asymmetry) is a fascinating trait of EPR steering,and it is diff... Einstein–Podolsky–Rosen(EPR) steering is an example of nontrivial quantum nonlocality and characteristic in the non-classical world.The directivity(or asymmetry) is a fascinating trait of EPR steering,and it is different from other quantum nonlocalities.Here,we consider the strategy in which two atoms compose a two-qubit X state,and the two atoms are owned by Alice and Bob,respectively.The atom of Alice suffers from a reservoir,and the atom of Bob couples with a bit flip channel.The influences of auxiliary qubits on EPR steering and its directions are revealed by means of the entropy uncertainty relation.The results indicate that EPR steering declines with growing time t when adding fewer auxiliary qubits.The EPR steering behaves as damped oscillation when introducing more auxiliary qubits in the strong coupling regime.In the weak coupling regime,the EPR steering monotonously decreases as t increases when coupling auxiliary qubits.The increases in auxiliary qubits are responsible for the fact that the steerability from Alice to Bob(or from Bob to Alice) can be more effectively revealed.Notably,the introductions of more auxiliary qubits can change the situation that steerability from Alice to Bob is certain to a situation in which steerability from Bob to Alice is certain. 展开更多
关键词 auxiliary qubits EPR steering DIRECTIONS influence
在线阅读 下载PDF
A new adaptive co-site broadband interference cancellation method with auxiliary channel
6
作者 Yunhao Jiang Siqi Liu +2 位作者 Minyang Li Nan Zhao Minghu Wu 《Digital Communications and Networks》 SCIE CSCD 2024年第4期934-947,共14页
With the boom of the communication systems on some independent platforms(such as satellites,space stations,airplanes,and vessels),co-site interference is becoming prominent.The adaptive interference cancellation metho... With the boom of the communication systems on some independent platforms(such as satellites,space stations,airplanes,and vessels),co-site interference is becoming prominent.The adaptive interference cancellation method has been adopted to solve the co-site interference problem.But the broadband interference cancellation performance of traditional Adaptive Co-site Interference Cancellation System(ACICS)with large delay mismatching and antenna sway is relatively poor.This study put forward an Adaptive Co-site Broadband Interference Cancellation System With Two Auxiliary Channels(ACBICS-2A).The system model was established,and the steady state weights and Interference Cancellation Ratio(ICR)were deduced by solving a time-varying differential equation.The relationship of ICR,system gain,modulation factor,interference signal bandwidth and delay mismatching degree was acquired through an in-depth analysis.Compared with traditional adaptive interference cancellation system,the proposed ACBICS-2A can improve broadband interference cancellation ability remarkably with large delay mismatching and antenna sway for the effect of auxiliary channel.The maximum improved ICR is more than 25 dB.Finally,the theoretical and simulation results were verified by experiments. 展开更多
关键词 Co-site broadband interference Interference cancellation auxiliary channel Delay mismatching
在线阅读 下载PDF
A GENERALIZED SCALAR AUXILIARY VARIABLE METHOD FOR THE TIME-DEPENDENT GINZBURG-LANDAU EQUATIONS
7
作者 司智勇 《Acta Mathematica Scientia》 SCIE CSCD 2024年第2期650-670,共21页
This paper develops a generalized scalar auxiliary variable(SAV)method for the time-dependent Ginzburg-Landau equations.The backward Euler method is used for discretizing the temporal derivative of the time-dependent ... This paper develops a generalized scalar auxiliary variable(SAV)method for the time-dependent Ginzburg-Landau equations.The backward Euler method is used for discretizing the temporal derivative of the time-dependent Ginzburg-Landau equations.In this method,the system is decoupled and linearized to avoid solving the non-linear equation at each step.The theoretical analysis proves that the generalized SAV method can preserve the maximum bound principle and energy stability,and this is confirmed by the numerical result,and also shows that the numerical algorithm is stable. 展开更多
关键词 time-dependent Ginzburg-Landau equation generalized scalar auxiliary variable algorithm maximum bound principle energy stability
在线阅读 下载PDF
Research on uninterruptable power supply technology for auxiliary winding of electric locomotive while passing the neutral section
8
作者 Yuliang Du 《Railway Sciences》 2024年第2期128-142,共15页
Purpose–Auxiliary power system is an indispensable part of the train;the auxiliary systems of both electric locomotives and EMUs mainly are powered by one of the two ways,which are either from auxiliary windings of t... Purpose–Auxiliary power system is an indispensable part of the train;the auxiliary systems of both electric locomotives and EMUs mainly are powered by one of the two ways,which are either from auxiliary windings of traction transformers or from DC-link voltage of traction converters.Powered by DC-link voltage of traction converters,the auxiliary systems were maintained of uninterruptable power supply with energy from electric braking.Meanwhile,powered by traction transformers,the auxiliary systems were always out of power while passing the neutral section of power supply grid and control system is powered by battery at this time.Design/methodology/approach–Uninterrupted power supply of auxiliary power system powered by auxiliary winding of traction transformer was studied.Failure reasons why previous solutions cannot be realized are analyzed.An uninterruptable power supply scheme for the auxiliary systems powered by auxiliary windings of traction transformers is proposed in this paper.The validity of the proposed scheme is verified by simulation and experimental results and on-site operation of an upgraded HXD3C type locomotive.This scheme is attractive for upgrading practical locomotives with the auxiliary systems powered by auxiliary windings of traction transformers.Findings–This scheme regenerates braking power supplied to auxiliary windings of traction transformers while a locomotive runs in the neutral section of the power supply grid.Control objectives of uninterrupted power supply technology are proposed,which are no overvoltage,no overcurrent and uninterrupted power supply.Originality/value–The control strategies of the scheme ensure both overvoltage free and inrush current free when a locomotive enters or leaves the neutral section.Furthermore,this scheme is cost low by employing updated control strategy of software and add both the two current sensors and two connection wires of hardware. 展开更多
关键词 Electric locomotive auxiliary system Neutral section Uninterruptable power supply OVERVOLTAGE Inrush current
在线阅读 下载PDF
2024 National Practical Technical Training on Textile Printing and Dyeing Auxiliary Preparation Succeeds
9
《China Detergent & Cosmetics》 CAS 2024年第3期79-79,共1页
From July 16th to 19th,2024,2024 National Practical Technical Training on Textile Printing and Dyeing Auxiliary Preparation,organized by China Research Institute of Daily Chemical and National Engineering Research Cen... From July 16th to 19th,2024,2024 National Practical Technical Training on Textile Printing and Dyeing Auxiliary Preparation,organized by China Research Institute of Daily Chemical and National Engineering Research Center for Surfactants,and co-organized by the Dyeing and Finishing Technology Research Institute of Zhejiang Fashion Institute of Technology and the High Fastness Plant-based Dye Research Base of China Textile Engineering Society,was held successfully in Shangyu,Zhejiang Province,with 92 representatives from 64 work units from all over China. 展开更多
关键词 auxiliary China TRAINING
在线阅读 下载PDF
Auxiliary Software for Defining the Parameters of the Structural Organization of a Complex System
10
作者 Branislav M. Savic 《Journal of Software Engineering and Applications》 2024年第2期109-128,共20页
The developed auxiliary software serves to simplify, standardize and facilitate the software loading of the structural organization of a complex technological system, as well as its further manipulation within the pro... The developed auxiliary software serves to simplify, standardize and facilitate the software loading of the structural organization of a complex technological system, as well as its further manipulation within the process of solving the considered technological system. Its help can be especially useful in the case of a complex structural organization of a technological system with a large number of different functional elements grouped into several technological subsystems. This paper presents the results of its application for a special complex technological system related to the reference steam block for the combined production of heat and electricity. 展开更多
关键词 Complex System Structural Organization auxiliary Software PARAMETERS
在线阅读 下载PDF
CycleGAN、ACGAN在人工智能医疗器械数据增广中的应用
11
作者 郝鹏飞 李瑶 +5 位作者 柴蕊 裴晓娟 于哲 李庆雨 陈曦 张克 《中国医疗设备》 2024年第2期52-56,69,共6页
目的探究人工智能医疗器械领域中使用循环生成对抗网络(Cycle-Consistent Generative Adversarial Networks,CycleGAN)和辅助分类生成对抗网络(Auxiliary Classification Generative Adversarial Network,ACGAN)进行数据增广的方法。方... 目的探究人工智能医疗器械领域中使用循环生成对抗网络(Cycle-Consistent Generative Adversarial Networks,CycleGAN)和辅助分类生成对抗网络(Auxiliary Classification Generative Adversarial Network,ACGAN)进行数据增广的方法。方法使用CycleGAN和ACGAN分别生成干扰图像和特定领域数据,对图像增加不规律的变换,对原始图像数据进行数据加工或应用生成对抗网络生成该领域所需的图像数据。结果在医学影像数据集上评估了本文提出方法的性能,结果表明,CycleGAN和ACGAN可有效生成逼真的医学影像,从而用于训练机器学习模型。结论该方法解决了人工智能领域图像数据不足的问题,保证了模型对该数据的不可见性,使后期模型评估结果更准确。 展开更多
关键词 循环生成对抗网络 辅助分类生成对抗网络 数据增广 医学影像 机器学习
在线阅读 下载PDF
新型插秧机的三维虚拟仿真设计 被引量:1
12
作者 吴珊丹 杨珍 辛春花 《农机化研究》 北大核心 2025年第5期186-190,共5页
传统的插秧机年作业量小、利用率低、智能化程度低,无法满足庞大的种植需求。为此,通过优化分析传统插秧机结构,设计一款新型插秧机。通过对新型插秧机辅助行走机构工作原理进行深入研究,完成了辅助行走机构运动学建模,并利用CATIA软件... 传统的插秧机年作业量小、利用率低、智能化程度低,无法满足庞大的种植需求。为此,通过优化分析传统插秧机结构,设计一款新型插秧机。通过对新型插秧机辅助行走机构工作原理进行深入研究,完成了辅助行走机构运动学建模,并利用CATIA软件建立新型插秧机虚拟样机三维模型,成功导入ADAMS软件中进行虚拟仿真建模。最后,对新型插秧机的升降高度和倾斜度进行仿真计算,验证了新型插秧机的理论模型和三维虚拟仿真模型的正确性。经过三维虚拟仿真设计后的新型插秧机设计合理,能够在实际工况下自主作业,有效减轻了作业人员的工作强度,提高了水稻种植效率,避免了漏播、重播等现象的发生,具有一定的实用价值。 展开更多
关键词 新型插秧机 虚拟仿真 辅助行走机构 运动学建模 自主作业
在线阅读 下载PDF
弹目交会条件下爆炸驱动结构体的展开过程研究
13
作者 宁建国 汪齐 栗建桥 《高压物理学报》 CAS 北大核心 2025年第1期1-16,共16页
复杂结构在爆炸驱动作用下的展开是展开型定向战斗部定向过程中的关键问题,对展开过程进行有效控制,有利于战斗部的起爆延时控制和破片利用率提高。针对复杂结构体的展开问题,基于JWL状态方程和第二类拉格朗日方程,从能量守恒出发推导... 复杂结构在爆炸驱动作用下的展开是展开型定向战斗部定向过程中的关键问题,对展开过程进行有效控制,有利于战斗部的起爆延时控制和破片利用率提高。针对复杂结构体的展开问题,基于JWL状态方程和第二类拉格朗日方程,从能量守恒出发推导了考虑爆轰产物膨胀过程和对目标命中状态的爆炸驱动展开模型。将驱动展开模型计算结果与文献实验结果进行对比,验证了爆炸驱动展开模型计算结果的准确性。结果表明,基于该模型的理论计算结果与实验结果的一致性较好,能较为精确地预测不同装药量下结构的展开时间;将辅助装药1与辅助装药2的质量比控制在1.5~1.7,结构体展开可达最佳命中姿态,更有利于命中目标。研究成果可充实定向战斗部设计理论,为展开型定向战斗部的设计提供参考。 展开更多
关键词 爆炸驱动 展开姿态 展开时间 辅助装药 定向战斗部
在线阅读 下载PDF
BDC-DAL:基于蓝图差分卷积和双重辅助监督的轻量化人脸活体检测算法
14
作者 叶继华 梁芳昕 +3 位作者 王超 肖顺杰 宗义 江爱文 《浙江大学学报(理学版)》 北大核心 2025年第1期98-109,121,共13页
人脸活体检测是确保人脸识别系统安全不可或缺的一环。当前大多数人脸活体检测算法采用的是深度卷积神经网络,尽管其检测性能卓越,但往往涉及庞大的参数量和计算复杂度,限制了其应用。为克服这些挑战,提出了一种基于蓝图差分卷积和双重... 人脸活体检测是确保人脸识别系统安全不可或缺的一环。当前大多数人脸活体检测算法采用的是深度卷积神经网络,尽管其检测性能卓越,但往往涉及庞大的参数量和计算复杂度,限制了其应用。为克服这些挑战,提出了一种基于蓝图差分卷积和双重辅助监督的轻量级人脸活体检测算法(BDC-DAL)。通过将轻量化的卷积结构和蓝图差分卷积设计相结合,有效降低了模型的参数和计算量,同时保留了捕捉复杂细粒度特征的能力。此外,引入的双重辅助监督机制,利用监督信号重建过程学习细微的欺诈线索,显著提高了模型对未知攻击场景的鲁棒性。为验证算法的有效性,在CelebA-Spoof和OULU-NPU人脸活体检测数据集上进行了广泛测试,并与当前主流的深度学习人脸活体检测算法和其他轻量化网络模型进行了比较,实验结果显示,BDC-DAL算法大幅降低了模型复杂度,参数量减少了近90%,模型的浮点计算量也下降了约10%。BDC-DAL算法在实现高效性和轻量化的同时,成功平衡了性能与资源消耗,为在资源受限环境下的人脸识别提供了可行的解决方案。 展开更多
关键词 人脸活体检测 轻量级 辅助信息监督
在线阅读 下载PDF
现代汉语助词“了”变化义再探
15
作者 陆方喆 朱斌 《汉语学报》 北大核心 2025年第1期49-59,共11页
文章在辨析“完成”“实现”和“界变”说的优劣基础上,提出汉语助词“了”的核心语法意义是表示“变化”。所谓“变化”是指过程、状态、量度、态度等方面发生改变。变化义是“了”使用的必要不充分条件。词尾“了”和句尾“了”在表... 文章在辨析“完成”“实现”和“界变”说的优劣基础上,提出汉语助词“了”的核心语法意义是表示“变化”。所谓“变化”是指过程、状态、量度、态度等方面发生改变。变化义是“了”使用的必要不充分条件。词尾“了”和句尾“了”在表达变化时略有差异,后者的主观性高于前者,表达的时制范围也大于前者。 展开更多
关键词 助词“了” 变化 语法意义
在线阅读 下载PDF
瑞士乳杆菌LH43作为辅助发酵剂对酸奶品质和蛋白质构象的影响
16
作者 马岩 李玉星 李柏良 《食品科学》 北大核心 2025年第5期134-141,共8页
为了探究具有产高分子质量胞外多糖能力的瑞土乳杆菌LH43作为辅助发酵剂对酸奶的影响,本实验利用质构分析仪、流变仪、扫描电镜、核磁共振仪、荧光分光光度计和圆二色光谱分析酸奶的凝胶特性和蛋白质构象。结果表明,采用瑞士乳杆菌LH43... 为了探究具有产高分子质量胞外多糖能力的瑞土乳杆菌LH43作为辅助发酵剂对酸奶的影响,本实验利用质构分析仪、流变仪、扫描电镜、核磁共振仪、荧光分光光度计和圆二色光谱分析酸奶的凝胶特性和蛋白质构象。结果表明,采用瑞士乳杆菌LH43作为辅助发酵剂能够显著提升酸奶的质构特性、持水能力及流变特性,改善了酸奶的微观结构和风味特性。同时,该菌株还降低了酸奶蛋白质的表面疏水性、游离巯基含量及无规卷曲相对含量,并增加了α-螺旋结构的相对含量,这证实了α-螺旋和无规卷曲是导致发酵乳凝胶产生差异的内在因素。综上所述,瑞士乳杆菌LH43可用于改善乳制品的凝胶性能,本研究可为酸奶发酵工艺的发展提供新的参考。 展开更多
关键词 瑞士乳杆菌 辅助发酵剂 加工性质 蛋白质构象
在线阅读 下载PDF
还原氧化石墨烯/壳聚糖自组装棉织物的制备及性能
17
作者 付承臣 赖璐 +2 位作者 周培茹 赖红静 曹机良 《精细化工》 北大核心 2025年第1期197-202,214,共7页
首先,以乙二醛和壳聚糖(CS)对纯棉织物进行改性制备了CS改性棉织物;然后,将CS改性棉织物经氧化石墨烯(GO)分散液浸渍;最后,将吸附沉积在棉织物上的GO还原为还原氧化石墨烯(RGO),制备了RGO/CS-棉织物。采用SEM、FTIR和Raman光谱对其进行... 首先,以乙二醛和壳聚糖(CS)对纯棉织物进行改性制备了CS改性棉织物;然后,将CS改性棉织物经氧化石墨烯(GO)分散液浸渍;最后,将吸附沉积在棉织物上的GO还原为还原氧化石墨烯(RGO),制备了RGO/CS-棉织物。采用SEM、FTIR和Raman光谱对其进行了表征,考察了CS质量分数、GO分散液质量浓度对RGO/CS-棉织物导电、抗紫外线和抑菌性能的影响,并对其耐洗性进行了测试。结果表明,RGO/CS-棉织物表面沉积的GO已较充分还原为RGO,表面覆盖了一层连续的RGO/CS薄膜;RGO/CS-棉织物导电性随着GO分散液质量浓度的增加而逐渐增强;经质量分数2.00%的CS溶液改性和质量浓度5 g/L的GO分散液处理并还原后的RGO/CS-棉织物具有最佳的导电性,表面电阻为1.02 kΩ/cm;RGO与CS协同增强了RGO/CS-棉织物的抑菌性能,抑菌率最高达95%;经质量分数0.50%的CS溶液改性和质量浓度3 g/L的GO分散液处理并还原后的RGO/CS-棉织物经过30~50次皂洗洗涤后,导电、抑菌和抗紫外线性能变化较小。 展开更多
关键词 壳聚糖 氧化石墨烯 棉织物 导电 自组装 纺织染整助剂
在线阅读 下载PDF
融合注意力机制的多视图卷积网络癫痫智能辅助检测
18
作者 李奇 闫旭荣 +3 位作者 武岩 赵迪 常立娜 孙瀚琳 《科学技术与工程》 北大核心 2025年第5期1988-1995,共8页
针对单一视图网络癫痫检测识别精度低的问题,提出一种融合注意力机制的多视图卷积网络癫痫智能辅助检测模型(multi-view convolutional network with fused attention mechanism,FAM-MCNN)。该模型从时域、频域、时频域和非线性域提取... 针对单一视图网络癫痫检测识别精度低的问题,提出一种融合注意力机制的多视图卷积网络癫痫智能辅助检测模型(multi-view convolutional network with fused attention mechanism,FAM-MCNN)。该模型从时域、频域、时频域和非线性域提取多视图特征来全面表征脑电信号;采用多尺度卷积捕捉不同层次的细节信息;引入注意力机制分别从视图维度和单个特征向量维度对特征进行加权融合,从而提高对癫痫患者不同类别脑电信号的区分能力。在CHB-MIT癫痫数据集上进行的对比实验结果显示,与单一视图网络相比,FAM-MCNN模型的平均准确率、灵敏度、特异度分别提高了14.29%、16.13%、12.54%。此外,对该模型采用少量训练样本(25%)进行实验,结果显示其检测性能达到了拥有大量训练样本(80%~90%)的对比模型水平。 展开更多
关键词 脑电信号 多视图卷积 注意力机制 癫痫智能辅助检测
在线阅读 下载PDF
汽车用前保险杠注塑参数田口试验及试验验证
19
作者 黄可 邹华杰 +1 位作者 钱子龙 李兵兵 《塑料工业》 北大核心 2025年第2期90-96,共7页
为了获得低翘曲量的汽车用前保险杠制品,对制品浇口充填方案进行可行性验证。经验证,聚合物链不会断裂,材料不会降解,优化后浇口成型方案合理。选取熔体温度(H)、注射压力(I)、模具表面温度(J)、“辅助流道”直径(K)、浇口宽度(L)、冷... 为了获得低翘曲量的汽车用前保险杠制品,对制品浇口充填方案进行可行性验证。经验证,聚合物链不会断裂,材料不会降解,优化后浇口成型方案合理。选取熔体温度(H)、注射压力(I)、模具表面温度(J)、“辅助流道”直径(K)、浇口宽度(L)、冷却时间(M),为研究对象,构建6因素5水平25次田口试验,当H为225℃,I为60 MPa,J为75℃,K为10 mm,L为20 mm,M为40 s(第6组工艺参数)时,最大翘曲量(20.10 mm)最小。通过极差分析,获得各因素各水平与最大翘曲量的关联,熔体温度、注射压力、“辅助流道”直径,对最大翘曲量的影响起到决定性作用;冷却时间,对最大翘曲量的影响作用不大;浇口宽度及模具表面温度,对最大翘曲量的影响最弱。在H为225℃,I为60 MPa,J为75℃,K为12 mm,L为32 mm,M为30 s参数下最大翘曲量较第6组工艺参数下的最大翘曲量,降低了30.3%。经试验验证,成型后的制品表面光泽均匀,没有出现烧焦、困气、熔接痕等缺陷,成型状态优良,保险杠两端与模具贴合良好,没有发现翘曲现象,验证了工艺参数的准确性,佐证了Moldflow 2024模流数值软件分析的科学性。 展开更多
关键词 前保险杠 熔体温度 注射压力 模具表面温度 “辅助流道”直径 浇口宽度 冷却时间
在线阅读 下载PDF
跨域水生病毒
20
作者 张奇亚 柯飞 《水生生物学报》 北大核心 2025年第1期61-75,共15页
水生病毒是感染各类水生生物或存在于不同水体中的病毒,为水生生态系统中最丰富的生物实体,显著影响宿主群落的结构与功能、从而影响生物圈和全球生物地球化学循环。无论从分类地位、宿主范围,还是遗传进化及生态效应角度来看,水生病毒... 水生病毒是感染各类水生生物或存在于不同水体中的病毒,为水生生态系统中最丰富的生物实体,显著影响宿主群落的结构与功能、从而影响生物圈和全球生物地球化学循环。无论从分类地位、宿主范围,还是遗传进化及生态效应角度来看,水生病毒都显示出丰富的多样性和跨域特征。以往对病毒感染及其影响的理解主要集中在病毒与宿主细胞的相互作用和其分子水平上。但要清晰认识水生病毒在生态系统中的作用及对生物地球化学循环的影响,则需结合微观、介观和宏观尺度,甚至遥感观测及多种新技术来实现。文章就跨域水生病毒与特征、驱动物种进化、病毒分流和地球化学循环效应及相关新兴技术等研究进展进行概述。 展开更多
关键词 水生病毒 病毒圈 生物地球化学循环 病毒分流 辅助代谢基因 水生态 病毒学新技术
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部