To improve ground vehicle efficiency, shift schedule energy saving was proposed for the ground vehicle automatic transmission by studying the function of the torque converter and transmission in the vehicular drivetra...To improve ground vehicle efficiency, shift schedule energy saving was proposed for the ground vehicle automatic transmission by studying the function of the torque converter and transmission in the vehicular drivetrain. The shift schedule can keep the torque converter working in the high efficiency range under all the working conditions except in the low efficiency range on the left when the transmission worked at the lowest shift, and in the low efficiency range on the right when the transmission worked at the highest shift. The shift quality key factors were analysed. The automatic trans-mission's bench-test adopting this shift schedule was made on the automatic transmission's test-bed. The experimental results showed that the shift schedule was correct and that the shift quality was controllable.展开更多
The development of hydrogen redox electric power generators for infinite cruising range electric vehicles represents a true technological breakthrough. Such systems consist of a polymer electrolyte membrane hydrogen e...The development of hydrogen redox electric power generators for infinite cruising range electric vehicles represents a true technological breakthrough. Such systems consist of a polymer electrolyte membrane hydrogen electrolytic cell equipped with an electrostatic-induction potential-superposed water electrolytic cell that provides a stoichiometric H2-O2 fuel mixture during operation of the vehicle. This generator functions with zero power input, zero matter input and zero emission due to the so-called ＂zero power input＂ electrostatic-to-chemical energy conversion occurring in the electrolytic cell. Here, theoretical simulations were performed to verify the target performance of such generators, assuming a pair of FC （fuel cell） and electrolytic cell stacks, both of which are commercially available.展开更多
Paper deals about testing of device with gravity assisted heat pipes and about researching of wick heat pipes used to effective heat transfers from power switches of energy converter. At first, to simulate ambient con...Paper deals about testing of device with gravity assisted heat pipes and about researching of wick heat pipes used to effective heat transfers from power switches of energy converter. At first, to simulate ambient condition was designed thermostatic chamber where was monitoring temperature course on main parts of cooling device （energy converter, air cooler and heat pipes） at various position of cooling device. It was found, if the cooling device is in tilt position the cooling performance is better. But if the tilt angel of gravity assisted heat pipe is higher the heat transfer is lower. From reason improve heat transfer cooling device at tilt angle are manufactured heat pipes with the sintered, mesh screen and grooved capillary structures and tested their thermal performance at vertical and tilt angel 45~ position by calorimetric method. Article describes manufacturing process and thermal performance measuring method of wick heat pipes. This experiment testify that the wick heat pipe is able operate at tilt angle position than gravity assisted heat pipe and application of wick heat pipes into cooling device will improve his cooling performance.展开更多
This paper presents the control ofa WECS （wind energy conversion system）, equipped with a DFIG （doubly fed induction generator）, for maximum power generation and power quality improvement simultaneously. The propo...This paper presents the control ofa WECS （wind energy conversion system）, equipped with a DFIG （doubly fed induction generator）, for maximum power generation and power quality improvement simultaneously. The proposed control algorithm is applied to a DFIG whose stator is directly connected to the grid and the rotor is connected to the grid through a back-to-back AC-DC-AC PWM （pulse width modulation） converter. The RSC （rotor side converter） is controlled in such a way to extract a maximum power, for a wide range of wind speed. The GSC （grid side converter） is controlled in order to filter harmonic currents of a nonlinear load coupled at the PCC （point of common coupling） and ensure smooth DC bus voltage. Simulation results show that the wind turbine can operate at its optimum energy for a wide range of wind speed and power quality improvement is achieved.展开更多
An approach was presented to intensify the mixing process. Firstly, a novel concept, the dissipation of mass transfer ability(DMA) associated with convective mass transfer, was defined via an analogy to the heat-work ...An approach was presented to intensify the mixing process. Firstly, a novel concept, the dissipation of mass transfer ability(DMA) associated with convective mass transfer, was defined via an analogy to the heat-work conversion. Accordingly, the focus on mass transfer enhancement can be shifted to seek the extremum of the DMA of the system. To this end, an optimization principle was proposed. A mathematical model was then developed to formulate the optimization into a variational problem. Subsequently, the intensification of the mixing process for a gas mixture in a micro-tube was provided to demonstrate the proposed principle. In the demonstration example, an optimized velocity field was obtained in which the mixing ability was improved, i.e., the mixing process should be intensified by adjusting the velocity field in related equipment. Therefore, a specific procedure was provided to produce a mixer with geometric irregularities associated with an ideal velocity.展开更多
Extraribosomal functions of ribosomal proteins （RPs） have gained much attention for their implications in tumorigenesis and pro- gression. However, the regulations for transition between the ribosomal and extraribos...Extraribosomal functions of ribosomal proteins （RPs） have gained much attention for their implications in tumorigenesis and pro- gression. However, the regulations for transition between the ribosomal and extraribosomal functions of RPs are rarely reported. Herein, we identified a ribosomal protein S7-interacting partner, BCCIPβ, which modulates the functional conversion of S7. Through the N-terminal acidic domain, BCCIPβ interacts with the central basic region in S7 and regulates the extraribosomal dis- tribution of S7. BCCIPI~ deficiency abrogates the ribosomal accumulation but enhances the ribosome-free location of S7. This translocation further impairs protein synthesis and triggers ribosomal stress. Consequently, BCCIPβ deficiency suppresses the ribosomal function and initiates the extraribosomal function of S7, resulting in restriction of cell proliferation. Moreover, clinically relevant S7 mutations were found to dampen the interaction with BCCIPβ and facilitate the functional transition of S7. In conclu- sion, BCCIPβ, as a S7 modulator, contributes to the regulation of ribosomal and extraribosomai functions of S7 and has implica- tions in cell growth and tumor development.展开更多
The catalytic effect of electrode materials is one of the most crucial factors for achieving efficient electrochemical energy conversion and storage.Carbon-based metal composites were widely synthesized and employed a...The catalytic effect of electrode materials is one of the most crucial factors for achieving efficient electrochemical energy conversion and storage.Carbon-based metal composites were widely synthesized and employed as electrode materials because of their inherited outstanding properties.Usually,electrode materials can provide a higher capacity than the anticipated values,even beyond the theoretical limit.The origin of the extra capacity has not yet been explained accurately,and its formation mechanism is still ambiguous.Herein,we first summarized the current research progress and drawbacks in energy storage devices(ESDs),and elaborated the role of catalytic effect in enhancing the performance of ESDs as follows:promoting the evolution of the solid electrolyte interphase(SEI),accelerating the reversible conversion of discharge/charge products,and improving the conversion speed of the intermediate and the utilization rate of the active materials,thereby avoiding the shuttling effect.Additionally,a particular focus was placed on the interaction between the catalytic effect and energy storage performance in order to highlight the efficacy and role of the catalytic effect.We hope that this review could provide innovative ideas for designing the electrode materials with an efficient catalytic effect for ESDs to promote the development of this research field.展开更多
We report the enhanced performance of organic solar cells(OSCs) based on regioregular poly(3-hexylthiophene)(P3HT) and methanofullerene [6,6]-phenyl C61-butyric acid methyl ester(PCBM) blend by using dihydroxybenzene ...We report the enhanced performance of organic solar cells(OSCs) based on regioregular poly(3-hexylthiophene)(P3HT) and methanofullerene [6,6]-phenyl C61-butyric acid methyl ester(PCBM) blend by using dihydroxybenzene as additive in the active layer.The effect of the content of the additives on electrical characteristics of the device is studied.The device with 0.2 wt% dihydroxybenzene additive achieves the best power conversion efficiency(PCE) of 4.58% with Jsc of 12.5 mA/cm2,Voc of 0.65 V,and FF of 66.6% under simulated solar illumination of AM 1.5G(100 mW/cm2),compared with the control device with PCE of 3.39%(35% improvement compared with the control device).The XRD measurement reveals that the addition of additives induces the crystallization of P3HT and establishes good inter-network to increase the contact area of donor and acceptor,and then helps charge to be effectively transferred to the electrode to reduce the chance of recombination.All evidences indicate that the dihydroxybenzene is likely to be a promising new type additive that can enhance the performance of organic bulk heterojunction solar cells.展开更多
We report the fabrication of CuI-Si heterojunction solar cells with carbon nanotubes （CNTs） as a transparent electrode. A flexible CNT network was transferred onto tile top of a polycrystalline CuI layer, making a c...We report the fabrication of CuI-Si heterojunction solar cells with carbon nanotubes （CNTs） as a transparent electrode. A flexible CNT network was transferred onto tile top of a polycrystalline CuI layer, making a conformal coating with good contact with the underlying CuI. The solar cells showed power conversion efficiencies in the range of 6% to 10.5%, while the efficiency degradation was less than 10% after the device was stored in air for 8 days. Compared with conventional rigid electrodes such as indium tin oxide （ITO） glass, the flexibility of the CNT films ensures better contact with the active layers and removes the need for press-contact electrodes. Degraded cells can recover their original performance by acid doping of the CNT electrode. Our results suggest that CNT films are suitable electrical contacts for rough materials and structures with an uneven surface.展开更多
Smart proton conductive metal-organic framework(MOF) membranes with dynamic remote control over proton conduction show high potential for use in advanced applications, such as sensors and bioprocesses. Here, we report...Smart proton conductive metal-organic framework(MOF) membranes with dynamic remote control over proton conduction show high potential for use in advanced applications, such as sensors and bioprocesses. Here, we report a photoswitchable proton conductive ZIF-8 membrane by coencapsulating polystyrene sulfonate and graphene quantum dots into a ZIF-8 matrix(GQDs-PSS@ZIF-8) via a solidconfined conversion process. The proton conductivity of the GQDs-PSS@ZIF-8 membrane is 6.3 times higher than that of pristine ZIF-8 and can be reversibly switched by light due to photoluminescence quenching and the photothermal conversion effect, which converts light into heat. The local increase in temperature allows water molecules to escape from the porous channels, which cuts off the proton transport pathways and results in a decrease in proton conductivity. The proton conductivity is restored when the light is off owing to regaining water molecules, which act as proton carriers, from the surroundings. The GQDs-PSS@ZIF-8 membrane responds efficiently to light and exhibits an ON/OFF ratio of 12.8. This photogated proton conduction in MOFs has potential for the development and application of MOF-based protonic solids in advanced photoelectric devices.展开更多
文摘To improve ground vehicle efficiency, shift schedule energy saving was proposed for the ground vehicle automatic transmission by studying the function of the torque converter and transmission in the vehicular drivetrain. The shift schedule can keep the torque converter working in the high efficiency range under all the working conditions except in the low efficiency range on the left when the transmission worked at the lowest shift, and in the low efficiency range on the right when the transmission worked at the highest shift. The shift quality key factors were analysed. The automatic trans-mission's bench-test adopting this shift schedule was made on the automatic transmission's test-bed. The experimental results showed that the shift schedule was correct and that the shift quality was controllable.
文摘The development of hydrogen redox electric power generators for infinite cruising range electric vehicles represents a true technological breakthrough. Such systems consist of a polymer electrolyte membrane hydrogen electrolytic cell equipped with an electrostatic-induction potential-superposed water electrolytic cell that provides a stoichiometric H2-O2 fuel mixture during operation of the vehicle. This generator functions with zero power input, zero matter input and zero emission due to the so-called ＂zero power input＂ electrostatic-to-chemical energy conversion occurring in the electrolytic cell. Here, theoretical simulations were performed to verify the target performance of such generators, assuming a pair of FC （fuel cell） and electrolytic cell stacks, both of which are commercially available.
文摘Paper deals about testing of device with gravity assisted heat pipes and about researching of wick heat pipes used to effective heat transfers from power switches of energy converter. At first, to simulate ambient condition was designed thermostatic chamber where was monitoring temperature course on main parts of cooling device （energy converter, air cooler and heat pipes） at various position of cooling device. It was found, if the cooling device is in tilt position the cooling performance is better. But if the tilt angel of gravity assisted heat pipe is higher the heat transfer is lower. From reason improve heat transfer cooling device at tilt angle are manufactured heat pipes with the sintered, mesh screen and grooved capillary structures and tested their thermal performance at vertical and tilt angel 45~ position by calorimetric method. Article describes manufacturing process and thermal performance measuring method of wick heat pipes. This experiment testify that the wick heat pipe is able operate at tilt angle position than gravity assisted heat pipe and application of wick heat pipes into cooling device will improve his cooling performance.
文摘This paper presents the control ofa WECS （wind energy conversion system）, equipped with a DFIG （doubly fed induction generator）, for maximum power generation and power quality improvement simultaneously. The proposed control algorithm is applied to a DFIG whose stator is directly connected to the grid and the rotor is connected to the grid through a back-to-back AC-DC-AC PWM （pulse width modulation） converter. The RSC （rotor side converter） is controlled in such a way to extract a maximum power, for a wide range of wind speed. The GSC （grid side converter） is controlled in order to filter harmonic currents of a nonlinear load coupled at the PCC （point of common coupling） and ensure smooth DC bus voltage. Simulation results show that the wind turbine can operate at its optimum energy for a wide range of wind speed and power quality improvement is achieved.
基金Supported by the National Basic Research Program of China("973" Program,No.2012CB720500)the National Natural Science Foundation of China(No.21176171)
文摘An approach was presented to intensify the mixing process. Firstly, a novel concept, the dissipation of mass transfer ability(DMA) associated with convective mass transfer, was defined via an analogy to the heat-work conversion. Accordingly, the focus on mass transfer enhancement can be shifted to seek the extremum of the DMA of the system. To this end, an optimization principle was proposed. A mathematical model was then developed to formulate the optimization into a variational problem. Subsequently, the intensification of the mixing process for a gas mixture in a micro-tube was provided to demonstrate the proposed principle. In the demonstration example, an optimized velocity field was obtained in which the mixing ability was improved, i.e., the mixing process should be intensified by adjusting the velocity field in related equipment. Therefore, a specific procedure was provided to produce a mixer with geometric irregularities associated with an ideal velocity.
文摘Extraribosomal functions of ribosomal proteins （RPs） have gained much attention for their implications in tumorigenesis and pro- gression. However, the regulations for transition between the ribosomal and extraribosomal functions of RPs are rarely reported. Herein, we identified a ribosomal protein S7-interacting partner, BCCIPβ, which modulates the functional conversion of S7. Through the N-terminal acidic domain, BCCIPβ interacts with the central basic region in S7 and regulates the extraribosomal dis- tribution of S7. BCCIPI~ deficiency abrogates the ribosomal accumulation but enhances the ribosome-free location of S7. This translocation further impairs protein synthesis and triggers ribosomal stress. Consequently, BCCIPβ deficiency suppresses the ribosomal function and initiates the extraribosomal function of S7, resulting in restriction of cell proliferation. Moreover, clinically relevant S7 mutations were found to dampen the interaction with BCCIPβ and facilitate the functional transition of S7. In conclu- sion, BCCIPβ, as a S7 modulator, contributes to the regulation of ribosomal and extraribosomai functions of S7 and has implica- tions in cell growth and tumor development.
基金the National Natural Science Foundation of China(21875221,21890753,22162026,22225204,and U1967215)the National Key Research and Development Program of China(2016YFB0101202)+2 种基金the Youth Talent Support Program of High-Level Talents Special Support Plan in Henan Province(ZYQR201810148)Qiushi Scientific Research Initiation Plan of Zhengzhou University(32213243)the Distinguished Young Scholars Innovation Team of Zhengzhou University(32320275).
文摘The catalytic effect of electrode materials is one of the most crucial factors for achieving efficient electrochemical energy conversion and storage.Carbon-based metal composites were widely synthesized and employed as electrode materials because of their inherited outstanding properties.Usually,electrode materials can provide a higher capacity than the anticipated values,even beyond the theoretical limit.The origin of the extra capacity has not yet been explained accurately,and its formation mechanism is still ambiguous.Herein,we first summarized the current research progress and drawbacks in energy storage devices(ESDs),and elaborated the role of catalytic effect in enhancing the performance of ESDs as follows:promoting the evolution of the solid electrolyte interphase(SEI),accelerating the reversible conversion of discharge/charge products,and improving the conversion speed of the intermediate and the utilization rate of the active materials,thereby avoiding the shuttling effect.Additionally,a particular focus was placed on the interaction between the catalytic effect and energy storage performance in order to highlight the efficacy and role of the catalytic effect.We hope that this review could provide innovative ideas for designing the electrode materials with an efficient catalytic effect for ESDs to promote the development of this research field.
基金supported by the National Natural Science Foundation of China (Nos.60876046 and 60976048)the Key Project of Chinese Ministry of Education (No.209007)+1 种基金Tianjin Natural Science Council (No.10ZCKFGX01900)the Scientific Developing Foundation of Tianjin Education Commission (No.20100723) and the Tianjin Key Discipline of Material Physics and Chemistry
文摘We report the enhanced performance of organic solar cells(OSCs) based on regioregular poly(3-hexylthiophene)(P3HT) and methanofullerene [6,6]-phenyl C61-butyric acid methyl ester(PCBM) blend by using dihydroxybenzene as additive in the active layer.The effect of the content of the additives on electrical characteristics of the device is studied.The device with 0.2 wt% dihydroxybenzene additive achieves the best power conversion efficiency(PCE) of 4.58% with Jsc of 12.5 mA/cm2,Voc of 0.65 V,and FF of 66.6% under simulated solar illumination of AM 1.5G(100 mW/cm2),compared with the control device with PCE of 3.39%(35% improvement compared with the control device).The XRD measurement reveals that the addition of additives induces the crystallization of P3HT and establishes good inter-network to increase the contact area of donor and acceptor,and then helps charge to be effectively transferred to the electrode to reduce the chance of recombination.All evidences indicate that the dihydroxybenzene is likely to be a promising new type additive that can enhance the performance of organic bulk heterojunction solar cells.
基金This work is supported by the National Natural Science Foundation of China （NSFC, Grant No.50972067） and the 863 Program （No. 2009AA05Z423）. A. Cao acknowledges the support by the National Science Foundation of China （NSFC, No. 51072005） and C. Huang acknowledges NSFC No. 90922004 for financial support.
文摘We report the fabrication of CuI-Si heterojunction solar cells with carbon nanotubes （CNTs） as a transparent electrode. A flexible CNT network was transferred onto tile top of a polycrystalline CuI layer, making a conformal coating with good contact with the underlying CuI. The solar cells showed power conversion efficiencies in the range of 6% to 10.5%, while the efficiency degradation was less than 10% after the device was stored in air for 8 days. Compared with conventional rigid electrodes such as indium tin oxide （ITO） glass, the flexibility of the CNT films ensures better contact with the active layers and removes the need for press-contact electrodes. Degraded cells can recover their original performance by acid doping of the CNT electrode. Our results suggest that CNT films are suitable electrical contacts for rough materials and structures with an uneven surface.
基金supported by the National Natural Science Foundation of China (21875212)the Key Program of National Natural Science Foundation (51632008)+2 种基金the Major R&D Plan of Zhejiang Natural Science Foundation (LD18E020001)the National Key Research and Development Program (2016YFA0200204)the Fundamental Research Funds for the Central Universities。
文摘Smart proton conductive metal-organic framework(MOF) membranes with dynamic remote control over proton conduction show high potential for use in advanced applications, such as sensors and bioprocesses. Here, we report a photoswitchable proton conductive ZIF-8 membrane by coencapsulating polystyrene sulfonate and graphene quantum dots into a ZIF-8 matrix(GQDs-PSS@ZIF-8) via a solidconfined conversion process. The proton conductivity of the GQDs-PSS@ZIF-8 membrane is 6.3 times higher than that of pristine ZIF-8 and can be reversibly switched by light due to photoluminescence quenching and the photothermal conversion effect, which converts light into heat. The local increase in temperature allows water molecules to escape from the porous channels, which cuts off the proton transport pathways and results in a decrease in proton conductivity. The proton conductivity is restored when the light is off owing to regaining water molecules, which act as proton carriers, from the surroundings. The GQDs-PSS@ZIF-8 membrane responds efficiently to light and exhibits an ON/OFF ratio of 12.8. This photogated proton conduction in MOFs has potential for the development and application of MOF-based protonic solids in advanced photoelectric devices.
