This study investigated the effect of pre-friction surfacing heat treatment of consumable rods and heat input during friction surfacing on the microstructure,mechanical properties,and wear resistance of hypereutectic ...This study investigated the effect of pre-friction surfacing heat treatment of consumable rods and heat input during friction surfacing on the microstructure,mechanical properties,and wear resistance of hypereutectic Al-Si alloy deposited on a commercially pure aluminum substrate.The results show that regardless of the consumable rod’s heat treatment conditions,the coating’s efficiency has increased with the increase in heat input,so the coating efficiency increases by 20%and 30%in the solid solution-treated rod and the artificially aged rod,respectively.By increasing the heat input,the average grain size in the coating fabricated by solid solution-treated rod and artificially aged rod increased from 0.1 to 0.9μm and from 0.2 to 1.3μm,respectively.At constant heat input,the average hardness and wear resistance of the coating created in the solid solution-treated rod are lower than those of the artificially aged rod.By decreasing heat input,the wear loss in the coating fabricated by solid solution-treated rod and artificially aged rod decreased by 10%and 20%,respectively,reaching 0.1 and 0.03μg/m.展开更多
In order to investigate the microstructure of TiN and TiAlN coatings and their effect on the wear resistance of Mg alloy, TiN and TiAlN coatings were deposited on AZ91 magnesium alloy by multi-arc ion plating technolo...In order to investigate the microstructure of TiN and TiAlN coatings and their effect on the wear resistance of Mg alloy, TiN and TiAlN coatings were deposited on AZ91 magnesium alloy by multi-arc ion plating technology.TiN and Ti70Al30N coatings were prepared on the substrate,respectively,which exhibited dark golden color and compact microstructure.The microstructures of TiN and Ti70Al30N coatings were investigated by X-ray diffractometry(XRD)and scanning electron microscopy(SEM).The micro-hardness and wear resistance of TiN and Ti70Al30N coatings were investigated in comparison with the uncoated AZ91 alloy. The XRD peaks assigned to TiN and TiAlN phases are found.The hardness of TiN coatings is two times as high as that of AZ91 alloy, and Ti70Al30N coating exhibits the highest hardness.The wear resistance of the hard coatings increases obviously as result of their high hardness.展开更多
Laser cladding of 316 L steel powders on pick substrate of coal mining machine was conducted, and microstructure of laser cladding coating was analyzed. The micro-hardness of laser cladding coating was examined. The r...Laser cladding of 316 L steel powders on pick substrate of coal mining machine was conducted, and microstructure of laser cladding coating was analyzed. The micro-hardness of laser cladding coating was examined. The results show that microstructure of laser cladding zone is exiguous dentrite, and there are hard spots dispersible distribution in the laser cladding zone. Performances of erode-resistant, surface micro-hardness and wear-resistant are improved obviously.展开更多
The Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)composite coatings were prepared by plasma spraying Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)and Al−Cr2O3−SiC composite powders,respectively.The microstructure,formation mechanism and proper...The Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)composite coatings were prepared by plasma spraying Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)and Al−Cr2O3−SiC composite powders,respectively.The microstructure,formation mechanism and properties of the two Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)composite coatings obtained by plasma spraying were investigated,and the reaction mechanism of the Al−Cr_(2)O_(3)−SiC system was explored.The results show that the coating obtained by plasma spraying Al−Cr_(2)O_(3)−SiC composite powders had thinner lamella and more tortuous interlayer interface,and the in-situ synthesized Cr_(7)C_(3),CrSi_(2) and Al_(2)O_(3) in the coating were all nano-crystallines.Compared with the Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)coating prepared by plasma spraying Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)composite powders,the plasma-sprayed Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)coating obtained from Al−Cr_(2)O_(3)−SiC composite powders had higher density,higher microhardness(increased by 20%),better fracture toughness and lower wear rate(reduced by 28%).展开更多
The three dimensional(3D) microstructures of Al-Bi alloys with different grain refiners(Al-5Ti-B, Al-3B and Al-3Ti) have been studied using synchrotron X-ray microtomography. The relationships between the microstructu...The three dimensional(3D) microstructures of Al-Bi alloys with different grain refiners(Al-5Ti-B, Al-3B and Al-3Ti) have been studied using synchrotron X-ray microtomography. The relationships between the microstructures and the corresponding wear behavior are verified through the friction and wear tests. The worn surfaces of the samples with grain refiners tested under 15 and 60 N loads are analyzed using Scanning Electron Microscopy(SEM). The results indicate that the addition of grain refiners is beneficial to the size and distribution of the Bi-rich particles in Al-Bi alloys. Compared with Al-5Ti-B and Al-3B grain refiners, the Bi-rich particles are more uniformly distributed and spherical with finer size with the addition of Al-3Ti grain refiner. The refinement renders the Al-20wt%Bi alloy refined by Al-3Ti the superior wear resistance with respect to those refined by Al-5Ti-B and Al-3B grain refiners, corresponding to the microstructures with fine and uniformly distributed Bi-rich particles in the Al matrix.展开更多
文摘This study investigated the effect of pre-friction surfacing heat treatment of consumable rods and heat input during friction surfacing on the microstructure,mechanical properties,and wear resistance of hypereutectic Al-Si alloy deposited on a commercially pure aluminum substrate.The results show that regardless of the consumable rod’s heat treatment conditions,the coating’s efficiency has increased with the increase in heat input,so the coating efficiency increases by 20%and 30%in the solid solution-treated rod and the artificially aged rod,respectively.By increasing the heat input,the average grain size in the coating fabricated by solid solution-treated rod and artificially aged rod increased from 0.1 to 0.9μm and from 0.2 to 1.3μm,respectively.At constant heat input,the average hardness and wear resistance of the coating created in the solid solution-treated rod are lower than those of the artificially aged rod.By decreasing heat input,the wear loss in the coating fabricated by solid solution-treated rod and artificially aged rod decreased by 10%and 20%,respectively,reaching 0.1 and 0.03μg/m.
基金Project(1091249-1-00)supported by the Bureau of Science and Technology of Shenyang City,China
文摘In order to investigate the microstructure of TiN and TiAlN coatings and their effect on the wear resistance of Mg alloy, TiN and TiAlN coatings were deposited on AZ91 magnesium alloy by multi-arc ion plating technology.TiN and Ti70Al30N coatings were prepared on the substrate,respectively,which exhibited dark golden color and compact microstructure.The microstructures of TiN and Ti70Al30N coatings were investigated by X-ray diffractometry(XRD)and scanning electron microscopy(SEM).The micro-hardness and wear resistance of TiN and Ti70Al30N coatings were investigated in comparison with the uncoated AZ91 alloy. The XRD peaks assigned to TiN and TiAlN phases are found.The hardness of TiN coatings is two times as high as that of AZ91 alloy, and Ti70Al30N coating exhibits the highest hardness.The wear resistance of the hard coatings increases obviously as result of their high hardness.
文摘Laser cladding of 316 L steel powders on pick substrate of coal mining machine was conducted, and microstructure of laser cladding coating was analyzed. The micro-hardness of laser cladding coating was examined. The results show that microstructure of laser cladding zone is exiguous dentrite, and there are hard spots dispersible distribution in the laser cladding zone. Performances of erode-resistant, surface micro-hardness and wear-resistant are improved obviously.
基金the National Natural Science Foundation of China(No.52072110)the Natural Science Foundation of Hebei Province,China(No.E2018202034).
文摘The Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)composite coatings were prepared by plasma spraying Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)and Al−Cr2O3−SiC composite powders,respectively.The microstructure,formation mechanism and properties of the two Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)composite coatings obtained by plasma spraying were investigated,and the reaction mechanism of the Al−Cr_(2)O_(3)−SiC system was explored.The results show that the coating obtained by plasma spraying Al−Cr_(2)O_(3)−SiC composite powders had thinner lamella and more tortuous interlayer interface,and the in-situ synthesized Cr_(7)C_(3),CrSi_(2) and Al_(2)O_(3) in the coating were all nano-crystallines.Compared with the Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)coating prepared by plasma spraying Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)composite powders,the plasma-sprayed Cr_(7)C_(3)−CrSi_(2)−Al_(2)O_(3)coating obtained from Al−Cr_(2)O_(3)−SiC composite powders had higher density,higher microhardness(increased by 20%),better fracture toughness and lower wear rate(reduced by 28%).
基金supported by the National Natural Science Foundation of China(Grant Nos.51274054,U1332115,51271042,51375070 and 51401044)the Key Grant Project of Chinese Ministry of Education(Grant No.313011)+1 种基金the Science and Technology Planning Project of Dalian(Grant No.2013A16GX110)the Fundamental Research Funds for the Central Universities
文摘The three dimensional(3D) microstructures of Al-Bi alloys with different grain refiners(Al-5Ti-B, Al-3B and Al-3Ti) have been studied using synchrotron X-ray microtomography. The relationships between the microstructures and the corresponding wear behavior are verified through the friction and wear tests. The worn surfaces of the samples with grain refiners tested under 15 and 60 N loads are analyzed using Scanning Electron Microscopy(SEM). The results indicate that the addition of grain refiners is beneficial to the size and distribution of the Bi-rich particles in Al-Bi alloys. Compared with Al-5Ti-B and Al-3B grain refiners, the Bi-rich particles are more uniformly distributed and spherical with finer size with the addition of Al-3Ti grain refiner. The refinement renders the Al-20wt%Bi alloy refined by Al-3Ti the superior wear resistance with respect to those refined by Al-5Ti-B and Al-3B grain refiners, corresponding to the microstructures with fine and uniformly distributed Bi-rich particles in the Al matrix.
