A novel,unsymmetrical diglycolamide,N,N'-dibutyl-N,N'-di(1-methylheptyl)-diglycolamide(DBD1MHDGA),was synthesized.The extraction of rare earth elements(REEs) from a hydrochloric acid medium with DBD1 MHDGA was...A novel,unsymmetrical diglycolamide,N,N'-dibutyl-N,N'-di(1-methylheptyl)-diglycolamide(DBD1MHDGA),was synthesized.The extraction of rare earth elements(REEs) from a hydrochloric acid medium with DBD1 MHDGA was investigated.The results of the extraction experiments indicated that the distribution ratios of RE(Ⅲ) ions increase with an increase in HC1 concentration,atomic number,and extractant concentration.The calculated thermodynamic data show that the extraction process is an exothermic reaction.The organic phase loaded rare earth ions were characterized by infrared spectroscopy.The composition of the extracted complex was determined.展开更多
The feasibility of reducing Cr(VI)from the aqueous solution by sulfuric acid-modified titanium-bearing blast furnace slag(SATBBFS)as a photocatalyst was investigated.The photocatalysts were examined by X-ray diffracti...The feasibility of reducing Cr(VI)from the aqueous solution by sulfuric acid-modified titanium-bearing blast furnace slag(SATBBFS)as a photocatalyst was investigated.The photocatalysts were examined by X-ray diffraction(XRD),UV-vis diffuse reflectance spectra,thermogravimetric analysis(TG)and Fourier transform infrared spectroscopy(FTIR).The photocatalytic activities of the different catalysts were evaluated by the photocatalytic reduction of Cr(VI)under UV-vis light irradiation.The results show that the photocatalytic activities of SATBBFS catalysts are strongly dependent on CaTiO3-to-TiO2 mass ratio,adsorption capacity and surface acidity,and SATBBFS calcined at 400°C shows a higher photocatalytic activity compared with other catalysts.展开更多
A novel chelating resin with sulfonic group was synthesized by chemical modification of D401 resin with sulphonation reaction and characterized by FT-IR spectrometry. The adsorption properties of the novel chelating r...A novel chelating resin with sulfonic group was synthesized by chemical modification of D401 resin with sulphonation reaction and characterized by FT-IR spectrometry. The adsorption properties of the novel chelating resin for Pb2+ were studied by batch adsorption, and the adsorption process was analyzed from thermodynamics and kinetics aspects. The adsorption mechanism of Pb2+ on the modified D401 chelating resin was discussed by FT-IR spectrometry. Experimental results show that in the Pb2+ concentration range of 200-400 mg/L, the adsorption capacities of the modified D401 chelating resin for Pb2+ increase by 77%-129%, and Langmuir isothermal adsorption model is more suitable for the equilibrium adsorption data. Adsorption is an endothermic process that runs spontaneously. Kinetic analysis shows that the adsorption rate is mainly governed by liquid film diffusion. The best pH value under adsorption condition is 4-5. The saturated resin can be regenerated by 3 mol/L nitric acid, and the adsorption capacity remains stable after five consecutive adsorption-desorption cycles. The maximal static saturated adsorption capacity of the resin is 206 mg/g at 333 K in the Pb2+ concentration range of 200-400 mg/L. The modified D401 chelating resin is an efficient adsorbent for the removal of Pb2+ from its single-metal ion solution.展开更多
Effects of metal oxide in ZSM-5 zeolite on its catalytic performance in fluid catalytic cracking reaction were studied via characterization by XRD and FT-IR spectroscopy using pyridine and collidine as molecular probe...Effects of metal oxide in ZSM-5 zeolite on its catalytic performance in fluid catalytic cracking reaction were studied via characterization by XRD and FT-IR spectroscopy using pyridine and collidine as molecular probes,and the modified ZSM-5 zeolite was evaluated in a micro reactor using standard light diesel fraction as the feedstock.Test results indicate that the metal species introduced into the ZSM-5 zeolite had led to the formation of Lewis acid centers.When the modified ZSM-5 zeolite with the metal species on its surface was used as the catalyst in FCC reaction,both the propylene yield and the propylene concentration in the liquefied petroleum gas increased,but in the meantime,more hydrogen and coke were formed at high conversion rate under the joint action of nonselective cracking of Lewis acid centers and dehydrogenation at metal centers on its outside surface.展开更多
Bio-oil is a new liquid fuel produced by fast pyrolysis,which is a promising technology to convert bio-mass into liquid. Pyrolytic lignin extracted from bio-oil,a fine powder,contributes to the instability of bio-oil....Bio-oil is a new liquid fuel produced by fast pyrolysis,which is a promising technology to convert bio-mass into liquid. Pyrolytic lignin extracted from bio-oil,a fine powder,contributes to the instability of bio-oil. The paper presents the structural features of three kinds of pyrolytic lignin extracted from bio-oil with different methods(WIF,HMM,and LMM) . The pyrolytic lignin samples are characterized by Fourier transform infrared spectrometer(FTIR) and X-ray photoelectron spectroscopy(XPS) . FTIR data indicate that the three pyrolytic lignin samples have similar functional groups,while the absorption intensity is different,and show characteristic vibra-tions of typical lignocellulosic material groups O H(3340-3380 cm-1) ,C H(2912-2929 cm-1) and C O(1652-1725 cm-1) . Comparison in the region(3340-3380 cm-1) indicates that WIF has more O H stretch groups than HMM and LMM. The carbon spectra are fitted to four peaks:C1,C C or C H,BE 283.5 eV;C2,C OR or C OH,BE 284.5-285.8 eV;C3,C O or HO C OR,BE 286.10-287.10 eV;C4,O C O,BE 287.5-287.7 eV. The absence of C1,C C or C H indicates the dominant polymerization structure of aro-matic carbon in pyrolytic lignin samples. For HMM and WIF,C2a and C2b can not be separated,so there is no free hydroxyl group in the samples. The oxygen peaks are also fitted to four peaks:O1,OH,BE = 530.3 eV;O2,RC O,BE 531.45-531.72 eV;O3,O C O,BE = 532.73-533.74 eV;O4,H2O,BE 535 eV. The absence of O1 and O4 indicates that little hydroxyl groups and adsorbed water are present in the samples.展开更多
基金supported by the National Natural Science Foundation of China(Nos.21077044,21171069)
文摘A novel,unsymmetrical diglycolamide,N,N'-dibutyl-N,N'-di(1-methylheptyl)-diglycolamide(DBD1MHDGA),was synthesized.The extraction of rare earth elements(REEs) from a hydrochloric acid medium with DBD1 MHDGA was investigated.The results of the extraction experiments indicated that the distribution ratios of RE(Ⅲ) ions increase with an increase in HC1 concentration,atomic number,and extractant concentration.The calculated thermodynamic data show that the extraction process is an exothermic reaction.The organic phase loaded rare earth ions were characterized by infrared spectroscopy.The composition of the extracted complex was determined.
基金Project(N090423003)supported by the Basic Scientific Research Costs of Central Colleges of ChinaProject(2007CB613504)supported by the National Basic Research Program of ChinaProject(307009)supported by the Foundation for Key Program of Ministry of Education,China
文摘The feasibility of reducing Cr(VI)from the aqueous solution by sulfuric acid-modified titanium-bearing blast furnace slag(SATBBFS)as a photocatalyst was investigated.The photocatalysts were examined by X-ray diffraction(XRD),UV-vis diffuse reflectance spectra,thermogravimetric analysis(TG)and Fourier transform infrared spectroscopy(FTIR).The photocatalytic activities of the different catalysts were evaluated by the photocatalytic reduction of Cr(VI)under UV-vis light irradiation.The results show that the photocatalytic activities of SATBBFS catalysts are strongly dependent on CaTiO3-to-TiO2 mass ratio,adsorption capacity and surface acidity,and SATBBFS calcined at 400°C shows a higher photocatalytic activity compared with other catalysts.
基金Project(708049) supported by the Important Item Cultivation Foundation of Scientific Innovation Project of Colleges and Universities of China
文摘A novel chelating resin with sulfonic group was synthesized by chemical modification of D401 resin with sulphonation reaction and characterized by FT-IR spectrometry. The adsorption properties of the novel chelating resin for Pb2+ were studied by batch adsorption, and the adsorption process was analyzed from thermodynamics and kinetics aspects. The adsorption mechanism of Pb2+ on the modified D401 chelating resin was discussed by FT-IR spectrometry. Experimental results show that in the Pb2+ concentration range of 200-400 mg/L, the adsorption capacities of the modified D401 chelating resin for Pb2+ increase by 77%-129%, and Langmuir isothermal adsorption model is more suitable for the equilibrium adsorption data. Adsorption is an endothermic process that runs spontaneously. Kinetic analysis shows that the adsorption rate is mainly governed by liquid film diffusion. The best pH value under adsorption condition is 4-5. The saturated resin can be regenerated by 3 mol/L nitric acid, and the adsorption capacity remains stable after five consecutive adsorption-desorption cycles. The maximal static saturated adsorption capacity of the resin is 206 mg/g at 333 K in the Pb2+ concentration range of 200-400 mg/L. The modified D401 chelating resin is an efficient adsorbent for the removal of Pb2+ from its single-metal ion solution.
文摘Effects of metal oxide in ZSM-5 zeolite on its catalytic performance in fluid catalytic cracking reaction were studied via characterization by XRD and FT-IR spectroscopy using pyridine and collidine as molecular probes,and the modified ZSM-5 zeolite was evaluated in a micro reactor using standard light diesel fraction as the feedstock.Test results indicate that the metal species introduced into the ZSM-5 zeolite had led to the formation of Lewis acid centers.When the modified ZSM-5 zeolite with the metal species on its surface was used as the catalyst in FCC reaction,both the propylene yield and the propylene concentration in the liquefied petroleum gas increased,but in the meantime,more hydrogen and coke were formed at high conversion rate under the joint action of nonselective cracking of Lewis acid centers and dehydrogenation at metal centers on its outside surface.
基金Supported by State Key Development Program for Basic Research of China(2007CB210208)National Science and Technology Major Project of China(2008ZX07101)China Scholarship Council(CSC),Natural Science and Engineering Research Council of Canada(NSERC),BIOCAP,and Canadian Funding for Innovations(CFI)
文摘Bio-oil is a new liquid fuel produced by fast pyrolysis,which is a promising technology to convert bio-mass into liquid. Pyrolytic lignin extracted from bio-oil,a fine powder,contributes to the instability of bio-oil. The paper presents the structural features of three kinds of pyrolytic lignin extracted from bio-oil with different methods(WIF,HMM,and LMM) . The pyrolytic lignin samples are characterized by Fourier transform infrared spectrometer(FTIR) and X-ray photoelectron spectroscopy(XPS) . FTIR data indicate that the three pyrolytic lignin samples have similar functional groups,while the absorption intensity is different,and show characteristic vibra-tions of typical lignocellulosic material groups O H(3340-3380 cm-1) ,C H(2912-2929 cm-1) and C O(1652-1725 cm-1) . Comparison in the region(3340-3380 cm-1) indicates that WIF has more O H stretch groups than HMM and LMM. The carbon spectra are fitted to four peaks:C1,C C or C H,BE 283.5 eV;C2,C OR or C OH,BE 284.5-285.8 eV;C3,C O or HO C OR,BE 286.10-287.10 eV;C4,O C O,BE 287.5-287.7 eV. The absence of C1,C C or C H indicates the dominant polymerization structure of aro-matic carbon in pyrolytic lignin samples. For HMM and WIF,C2a and C2b can not be separated,so there is no free hydroxyl group in the samples. The oxygen peaks are also fitted to four peaks:O1,OH,BE = 530.3 eV;O2,RC O,BE 531.45-531.72 eV;O3,O C O,BE = 532.73-533.74 eV;O4,H2O,BE 535 eV. The absence of O1 and O4 indicates that little hydroxyl groups and adsorbed water are present in the samples.
