Based on the fatigue prediction model of exponential function and Whitney-Nuismer(WN) criterion of static strength for the composite material laminate with a circular hole, the stress correct factor ( β ) was put for...Based on the fatigue prediction model of exponential function and Whitney-Nuismer(WN) criterion of static strength for the composite material laminate with a circular hole, the stress correct factor ( β ) was put forward and a new fatigue prediction model for composite material laminate was set up. T300/KH304, which is recently studied and is a high capability composite material, was used as the raw material. In order to gain the factor β , the fatigue experiments of the laminates with holes in different diameters and the same ratio of width to diameter were conducted. The fatigue analysis and tests of the laminates with a hole 5 mm in diameter are carried out at different stress levels, and the results meet the engineering requirement. The simple, prompt and practical method is provided for the prediction of S-N curve of composite laminate with a circular hole.展开更多
To study the influence of construction interfaces on dynamic characteristics of roller compacted concrete dams(RCCDs),mechanical properties of construction interfaces are firstly analyzed. Then, the viscous-spring art...To study the influence of construction interfaces on dynamic characteristics of roller compacted concrete dams(RCCDs),mechanical properties of construction interfaces are firstly analyzed. Then, the viscous-spring artificial boundary(VSAB) is adopted to simulate the radiation damping of their infinite foundations, and based on the Marc software, a simplified seismic motion input method is presented by the equivalent nodal loads. Finally, based on the practical engineering of a RCC gravity dam, effects of radiation damping and construction interfaces on the dynamic characteristics of dams are investigated in detail. Analysis results show that dynamic response of the RCC gravity dam significantly reduces about 25% when the radiation damping of infinite foundation is considered. Hot interfaces and the normal cold interfaces have little influence on the dynamic response of the RCC gravity dam.However, nonlinear fracture along the cold interfaces at the dam heel will occur under the designed earthquake if the cold interfaces are combined poorly. Therefore, to avoid the fractures along the construction interfaces under the potential super earthquakes,combination quality of the RCC layers should be significantly ensured.展开更多
Based on the construction property of rolled compacted concrete, three-dimensional finite element relocating mesh method was developed in simulating construction process and computing temperature and stress field. Usi...Based on the construction property of rolled compacted concrete, three-dimensional finite element relocating mesh method was developed in simulating construction process and computing temperature and stress field. Using this method, the temperature and the thermal stress fields developed in the RCC gravity dam of the Longtan project with or without a longitudinal joint during construction and operation are calculated so as to simulate the construction process. The computation results show that the value of the thermal stresses developed in the dam even, without any longitudinal joint, could meet the design criteria provided the placement temperature is adequately controlled.展开更多
In this paper, regarding the actual conditions of a roller compacted concrete dam, three-dimensional finite element relocating mesh method is utilized to simulate and calculate the temperature field of the RCC dam dur...In this paper, regarding the actual conditions of a roller compacted concrete dam, three-dimensional finite element relocating mesh method is utilized to simulate and calculate the temperature field of the RCC dam during the construction stage and operating period. The calculation is well consistent with the actual construction process, the thin-layer pouring process the pouring temperature and all kinds of external loads involved being taken into account, By comparing and analyzing of the impact of the cold wave on the dam stress, important references are provided for the RCCD design and the temperature control during construction.展开更多
According to the construction characteristic of RCC dam cast by layers, three-dimensional finite element relocating mesh method is developed to simulate construction process and compute temperature field. The computat...According to the construction characteristic of RCC dam cast by layers, three-dimensional finite element relocating mesh method is developed to simulate construction process and compute temperature field. The computation model of relocating mesh method is expatiated in detail; based on the thermodynamic properties of RCC materials, the feasibility and error of relocating mesh method are analyzed and demonstrated; The computation results in this article are verified by means of the temperature observation data of certain RCC gravity dam. The results show that the temperature field computed by three-dimensional finite element relocating mesh method can not only ensure the computation precision, but also improve the calculation efficiency greatly. This provides an effective method for simulating construction process and computing temperature field of RCC dam.展开更多
文摘Based on the fatigue prediction model of exponential function and Whitney-Nuismer(WN) criterion of static strength for the composite material laminate with a circular hole, the stress correct factor ( β ) was put forward and a new fatigue prediction model for composite material laminate was set up. T300/KH304, which is recently studied and is a high capability composite material, was used as the raw material. In order to gain the factor β , the fatigue experiments of the laminates with holes in different diameters and the same ratio of width to diameter were conducted. The fatigue analysis and tests of the laminates with a hole 5 mm in diameter are carried out at different stress levels, and the results meet the engineering requirement. The simple, prompt and practical method is provided for the prediction of S-N curve of composite laminate with a circular hole.
基金Projects(20120094110005,20120094130003)supported by the Research Fund for the Doctoral Program of Higher Education of ChinaProjects(51379068,51139001,51279052,51209077,51179066)supported by the National Natural Science Foundation of China+1 种基金Project(NCET-11-0628)supported by the Program for New Century Excellent Talents in University,ChinaProjects(201201038,201101013)supported by the Public Welfare Industry Research Special Fund Project of Ministry of Water Resources of China
文摘To study the influence of construction interfaces on dynamic characteristics of roller compacted concrete dams(RCCDs),mechanical properties of construction interfaces are firstly analyzed. Then, the viscous-spring artificial boundary(VSAB) is adopted to simulate the radiation damping of their infinite foundations, and based on the Marc software, a simplified seismic motion input method is presented by the equivalent nodal loads. Finally, based on the practical engineering of a RCC gravity dam, effects of radiation damping and construction interfaces on the dynamic characteristics of dams are investigated in detail. Analysis results show that dynamic response of the RCC gravity dam significantly reduces about 25% when the radiation damping of infinite foundation is considered. Hot interfaces and the normal cold interfaces have little influence on the dynamic response of the RCC gravity dam.However, nonlinear fracture along the cold interfaces at the dam heel will occur under the designed earthquake if the cold interfaces are combined poorly. Therefore, to avoid the fractures along the construction interfaces under the potential super earthquakes,combination quality of the RCC layers should be significantly ensured.
文摘Based on the construction property of rolled compacted concrete, three-dimensional finite element relocating mesh method was developed in simulating construction process and computing temperature and stress field. Using this method, the temperature and the thermal stress fields developed in the RCC gravity dam of the Longtan project with or without a longitudinal joint during construction and operation are calculated so as to simulate the construction process. The computation results show that the value of the thermal stresses developed in the dam even, without any longitudinal joint, could meet the design criteria provided the placement temperature is adequately controlled.
文摘In this paper, regarding the actual conditions of a roller compacted concrete dam, three-dimensional finite element relocating mesh method is utilized to simulate and calculate the temperature field of the RCC dam during the construction stage and operating period. The calculation is well consistent with the actual construction process, the thin-layer pouring process the pouring temperature and all kinds of external loads involved being taken into account, By comparing and analyzing of the impact of the cold wave on the dam stress, important references are provided for the RCCD design and the temperature control during construction.
文摘According to the construction characteristic of RCC dam cast by layers, three-dimensional finite element relocating mesh method is developed to simulate construction process and compute temperature field. The computation model of relocating mesh method is expatiated in detail; based on the thermodynamic properties of RCC materials, the feasibility and error of relocating mesh method are analyzed and demonstrated; The computation results in this article are verified by means of the temperature observation data of certain RCC gravity dam. The results show that the temperature field computed by three-dimensional finite element relocating mesh method can not only ensure the computation precision, but also improve the calculation efficiency greatly. This provides an effective method for simulating construction process and computing temperature field of RCC dam.
