Coal preparation is an integral part of the coal commodity supply chain. This stage of post-mining, pre-utilization beneficiation uses low-cost separation technologies to remove unwanted mineral matter and moisture wh...Coal preparation is an integral part of the coal commodity supply chain. This stage of post-mining, pre-utilization beneficiation uses low-cost separation technologies to remove unwanted mineral matter and moisture which hinder the value of the coal product. Coal preparation plants typically employ several parallel circuits of cleaning and dewatering operations, with each circuit designed to optimally treat a specific size range of coal. Recent innovations in coal preparation have increased the efficiency and capac- ity of individual unit operations while reinforcing the standard parallel cleaning approach. This article, which describes the historical influences and state-of-the-art design for the various coal preparation unit operations, is organized to distinguish between coarse/intermediate coal cleaning and fine/ultrafine coal cleaning. Size reduction, screening, classification, cleaning, dewatering, waste disposal unit operations are particularly highlighted, with a special focus on the LI.S. design philosophy. Notable differences between the U.S. and international operations are described as appropriate.展开更多
A stripping batch distillation column is preferred when the amount of the light component in the feed is small and the products are to be recovered at high purity. The operation modes of a batch stripping are believed...A stripping batch distillation column is preferred when the amount of the light component in the feed is small and the products are to be recovered at high purity. The operation modes of a batch stripping are believed to be the same as those of a rectifier. However, the control system of a stripper is different. In this paper, we explore three different control methods with Hysys (Hyprotech Ltd. 1997) for a batch stripper. The main difference is the control scheme for reboiler liquid level: (a) controlled by reflux flow; (b) controlled by reboiler heat duty; (c) controlled by bottom product flow. The main characteristics of operating a batch stripper with different control scheme are presented in this paper. Guidelines are provided for the startup of a batch stripper, the effects of somecontrol tuning parameters on the column performance are discussed.展开更多
Operators suffer much diffieulty in manipulating miero-size objects without the assistance of friendly interfaces due to the scaling effects in micro worht. The paper presented a general framework for mieromanipulatio...Operators suffer much diffieulty in manipulating miero-size objects without the assistance of friendly interfaces due to the scaling effects in micro worht. The paper presented a general framework for mieromanipulation robot hased on virtual reality technology. With the framework we brought forward a FDH （Fixed Direction Hulls） based hounding box method to handle the eollision ,teteetion of the peg-in-hole mieroassembly. The eollision response model for the collision between micro needle and hole was presented. The virtual three and corresponding displacement were calculated with the model of bending deformation and pressing ,teformation. Experiments verify the validity of collision response model.展开更多
Analyzing and discussing advantages of3D laparoscopic surgery in postoperative recovery Method： Selecting patients were treated by 2D laparoscopic surgery or 3D laparoscopic,surgery in our hospital from January 2015...Analyzing and discussing advantages of3D laparoscopic surgery in postoperative recovery Method： Selecting patients were treated by 2D laparoscopic surgery or 3D laparoscopic,surgery in our hospital from January 2015 to January 2016 as research subjects. According to different methods, we separate patients into two groups, and each group is 150 patients. The one is test group （3D laparoscopic surgery）, and the other is control group（2D laparoscopic surgery）. Observing two groups for some factors, such as probability of surgical injury, post-operative exhaust time, catheterization time, time of drainage tube placement and hospital time. Result： The magnification of3D laparoscopy image is significantly better than 2D laparoscopy. Error damage fraction of test group（2. 00%） is lower than control group （28.00%）, which effectively reduces the probability of total surgical errors and provides more accurate operation. At the same time, exhaust time, catheterization time, time of drainage tube placement and hospital time of test group are significantly lower than the control group, statistically significant （p〈0.05）. Conclusion： 3D laparoscopic surgery has characterizations of easy operation, small window, fast recovery and small probability of complications occurrence. The HD vision is widen to improve the level of minimally invasive surgery and it is worthy of clinical application.展开更多
对虾的养殖在我国的水产养殖业中占有重要地位，但近年来由于种质退化、种苗质量下降、病害严重等问题，已经严重阻碍了对虾产业的健康、可持续发展。中国科学院海洋研究所相建海研究员的课题组自20世纪90年代以来长期致力于对虾染色体...对虾的养殖在我国的水产养殖业中占有重要地位，但近年来由于种质退化、种苗质量下降、病害严重等问题，已经严重阻碍了对虾产业的健康、可持续发展。中国科学院海洋研究所相建海研究员的课题组自20世纪90年代以来长期致力于对虾染色体组操作的研究，通过对诱导方法的探索和诱导条件的优化，在国际上首次成功批量诱导出对虾的三倍体。其中Triploid breeding methods for different shrimp species（不同种类对虾三倍体的制备方法）获得美国专利。展开更多
文摘Coal preparation is an integral part of the coal commodity supply chain. This stage of post-mining, pre-utilization beneficiation uses low-cost separation technologies to remove unwanted mineral matter and moisture which hinder the value of the coal product. Coal preparation plants typically employ several parallel circuits of cleaning and dewatering operations, with each circuit designed to optimally treat a specific size range of coal. Recent innovations in coal preparation have increased the efficiency and capac- ity of individual unit operations while reinforcing the standard parallel cleaning approach. This article, which describes the historical influences and state-of-the-art design for the various coal preparation unit operations, is organized to distinguish between coarse/intermediate coal cleaning and fine/ultrafine coal cleaning. Size reduction, screening, classification, cleaning, dewatering, waste disposal unit operations are particularly highlighted, with a special focus on the LI.S. design philosophy. Notable differences between the U.S. and international operations are described as appropriate.
基金Supported by CONICET (Consejo Nacional de Investigaciones Cientificas y Tecnicas, Argentina) (No. 778) and the Scientific Research Foundation of the State Education Ministry for Returned Overseas Chinese Scholar.
文摘A stripping batch distillation column is preferred when the amount of the light component in the feed is small and the products are to be recovered at high purity. The operation modes of a batch stripping are believed to be the same as those of a rectifier. However, the control system of a stripper is different. In this paper, we explore three different control methods with Hysys (Hyprotech Ltd. 1997) for a batch stripper. The main difference is the control scheme for reboiler liquid level: (a) controlled by reflux flow; (b) controlled by reboiler heat duty; (c) controlled by bottom product flow. The main characteristics of operating a batch stripper with different control scheme are presented in this paper. Guidelines are provided for the startup of a batch stripper, the effects of somecontrol tuning parameters on the column performance are discussed.
文摘Operators suffer much diffieulty in manipulating miero-size objects without the assistance of friendly interfaces due to the scaling effects in micro worht. The paper presented a general framework for mieromanipulation robot hased on virtual reality technology. With the framework we brought forward a FDH （Fixed Direction Hulls） based hounding box method to handle the eollision ,teteetion of the peg-in-hole mieroassembly. The eollision response model for the collision between micro needle and hole was presented. The virtual three and corresponding displacement were calculated with the model of bending deformation and pressing ,teformation. Experiments verify the validity of collision response model.
文摘Analyzing and discussing advantages of3D laparoscopic surgery in postoperative recovery Method： Selecting patients were treated by 2D laparoscopic surgery or 3D laparoscopic,surgery in our hospital from January 2015 to January 2016 as research subjects. According to different methods, we separate patients into two groups, and each group is 150 patients. The one is test group （3D laparoscopic surgery）, and the other is control group（2D laparoscopic surgery）. Observing two groups for some factors, such as probability of surgical injury, post-operative exhaust time, catheterization time, time of drainage tube placement and hospital time. Result： The magnification of3D laparoscopy image is significantly better than 2D laparoscopy. Error damage fraction of test group（2. 00%） is lower than control group （28.00%）, which effectively reduces the probability of total surgical errors and provides more accurate operation. At the same time, exhaust time, catheterization time, time of drainage tube placement and hospital time of test group are significantly lower than the control group, statistically significant （p〈0.05）. Conclusion： 3D laparoscopic surgery has characterizations of easy operation, small window, fast recovery and small probability of complications occurrence. The HD vision is widen to improve the level of minimally invasive surgery and it is worthy of clinical application.
文摘对虾的养殖在我国的水产养殖业中占有重要地位，但近年来由于种质退化、种苗质量下降、病害严重等问题，已经严重阻碍了对虾产业的健康、可持续发展。中国科学院海洋研究所相建海研究员的课题组自20世纪90年代以来长期致力于对虾染色体组操作的研究，通过对诱导方法的探索和诱导条件的优化，在国际上首次成功批量诱导出对虾的三倍体。其中Triploid breeding methods for different shrimp species（不同种类对虾三倍体的制备方法）获得美国专利。
