[Objective]Aimed to study the nature,characteristics and ultrastructure of fibers of Ovis aries and several kinds of special animals.[Method]Wool,cashmere,alpaca,Bactrian camel hairs,rabbit hair,mohair and yak hair we...[Objective]Aimed to study the nature,characteristics and ultrastructure of fibers of Ovis aries and several kinds of special animals.[Method]Wool,cashmere,alpaca,Bactrian camel hairs,rabbit hair,mohair and yak hair were used as the experimental materials,and scanning electron microscopy was used to observe their scale structure.[Result]The rake angle of wool was large with an average of 33.2°,the scale density was 16.2-34.9 scales/mm,the average height of scale was 12.95 μm,and the average thickness was 0.63 μm;the rake angle of cashmere was smaller than wool with an average of 20.6°,the scale density was of 10.3-15.6 scales/mm,the scale distance was large,the average height of scale was 16.09 μm,and the average thickness was 0.46 μm;the average rake angle of alpaca was 34.6°,with the average scale height of 5.85 μm,and average thickness of 0.33 μm;the average rake angle of camel hair was 33.5°,with the average scale height of 11.30 μm and average thickness of 0.37 μm;the average rake angle of rabbit hair was 31.2°,with average scale height of 7.03 μm and average thickness of 0.36 μm;the rake angle value of mohair was between wool and cashmere,and the average of which was 23.7°,the scale density value was also between the wool and cashmere,with the average scale height of 15.82 μm and average thickness of 0.61 μm;the average rake angle yak hair was 33.2°,with the average height of 9.08 μm and average thickness of 0.46 μm.[Conclusion]The results of this study could provide a basis for the identification of different fiber types.展开更多
The morphology of antennae of Aphidoletes aphidimyza was observed with a scanning electron microscope. The results showed that both male and female were fourteen segmented, the male was approximately 2000 μm and the ...The morphology of antennae of Aphidoletes aphidimyza was observed with a scanning electron microscope. The results showed that both male and female were fourteen segmented, the male was approximately 2000 μm and the female was 1050μm. Six types of sensillae on the antenna were observed, viz. chaetica （Ch）, trichoidea （Tr）, basiconica （Ba）, cavity （Ca）, styloid （St） and circumfila （Ci） on the antennae of A. aphidimyza. Sensillae Ch had a long external-process, with a base surrounded by membranous sockets and a length of about 67.5 μm. Sensillae Tr were distally curved and inserted into a depression, 61.0μm long. Sensillae Ba were peg-like and 4.7μm long on the antennae. Sensillae Ca were pit-like in appearance and the diameter of the pit was 1.2μm. Sensilla St was found on the second sub-segment flagellum of the male antennae. The length of the sensilla was about 21 μm and the diameter was 1.5μm. The circurnfila, which are a unique type of sensilla found only on cecidomyiid antennae, formed loops around each of the antennal sub-segments, and were attached to the surface by a series of stalks. Sensilla St was only present on male antenna. The number of Ba and Tr was almost the same in both sexes. There were more Sensilla Ca on the male antenna than on the female, while there was more Ch on the female.展开更多
[ Objective] The research aimed to explore the manufacturing methods of scanning electron microscope （SEM） and transmission electron microscopy （TEM） for oocyte and provide technical support for related research. ...[ Objective] The research aimed to explore the manufacturing methods of scanning electron microscope （SEM） and transmission electron microscopy （TEM） for oocyte and provide technical support for related research. [ Method] Based on GV-and MII-stage oocytes, samples of SEM and TEM were prepared respectively, then ultrastructure changes were observed. [ Result] The results showed that the method needed few samples, keep intact cell morphology and can see clear ultrastructure. [Conclusion] The method is suitable for ultrastructural observation of oocyte.展开更多
[Objective]The experiment aimed to explore a new way for observing surface structure of Nostoc sphaeroides Kutzing. [Method] The scanning electron microscope was used to observe the epidermal ultrastructure of wild an...[Objective]The experiment aimed to explore a new way for observing surface structure of Nostoc sphaeroides Kutzing. [Method] The scanning electron microscope was used to observe the epidermal ultrastructure of wild and cultured Nostoc sphaeroides Kutzing. [ Result] The epidermis of wild and cultured Nostoc sphaeroides Kutzing showed mixture structure of fibril colloid which was reticular arranged. The difference between wild and cultured Nostoc sphaeroides Kutzing was that the outer epidermis of cultured Nostoc sphaeroides Kutzing had trichome distribution but the wild Nostoc sphaeroides Kutzing did not has such distribution. The obsevation results of under smaller than 10 μm by scanning electron microscope was touched thick and showed many folds and distortions. [ Conclusion] The scanning electron microscope was an effective way to study development of Nostoc sphaeroides Kutzing colony and it was worth popularizing.展开更多
ZnO nanobelts, hollow microspheres, and urchins have been prepared on copper foil via a simply low temperature evaporation route. The microstructure, morphologies, and photolu-minescence of the ZnO nanostructures were...ZnO nanobelts, hollow microspheres, and urchins have been prepared on copper foil via a simply low temperature evaporation route. The microstructure, morphologies, and photolu-minescence of the ZnO nanostructures were studied with X-ray diffraction, Raman spectra, scanning electron microscopy and photoluminescence spectra. The width of the nanobelts was about 500 nm and the length was longer than 10μm. The diameter of the hollow microspheres was between 5 and 10μm. A possible growth mechanism of the nanobelts, microspheres and urchins was proposed. The photoluminescence spectrum exhibited strong deep level energy emissions and a weak near band edge emission. These ZnO nanostructures on a copper substrate have the advantages of naturally good adhesion and electrical connection between the ZnO nanostructures and the conductive substrate.展开更多
Numerous leaf compressions of Glyptostrobus europaeus (Brongn.) Ung. (Taxodiaceae) are found in Aquitanian (Lower Miocene) lignified clay localities Bolattam and Akzhar in the Southern Turgay, on the right bank of the...Numerous leaf compressions of Glyptostrobus europaeus (Brongn.) Ung. (Taxodiaceae) are found in Aquitanian (Lower Miocene) lignified clay localities Bolattam and Akzhar in the Southern Turgay, on the right bank of the Dulygaly-Zhilanshik river (Central Kazakhstan). The finely preserved lignified compression remains of leafy shoots make micro-morphological investigation feasible. Comparative studies of the epidermal features both living G. pensilis C. Koch and a new finding of G. europaeus from Early Miocene of Kazakhstan and illustrate their certain difference. The cuticular organization and epidermal features of fossil leaves, which have been compared with these of 'the nearest living relative', G. pensilis, were studied by scanning electron microscopy (SEM) and light microscopy (LM). The fossil leaves of G. europaeus from Kazakhstan are distinguished by stronger, than in living species, G. pensilis, developed 'micro-papillae' ('Kristallucken'), visible in SEM as ring-like structures left on the outer surface of cuticle in both nonstomatal and stomatal zones.展开更多
In this paper we describe a route to produce crystalline Mg（OH）2 nanopowders from serpentinite ore distributed in the Halilovskiy array （Russia, Orenburg region）. An efficient extraction route consisting of treatm...In this paper we describe a route to produce crystalline Mg（OH）2 nanopowders from serpentinite ore distributed in the Halilovskiy array （Russia, Orenburg region）. An efficient extraction route consisting of treatment on serpentinite in 40% HNO3 at 80 ℃followed by NH4OH titration for Mg（OH）2 precipitation was demonstrated. In this study, crystalline Mg（OH）2 nanopowders have been synthesized by solvothermal reaction method using （Mg（NO3）2·6H2O） which were obtained from serpentinite, NH4OH as a precipitator, and hydroxyethylated nonylphenol as surface-active substance. Microstructure and phase composition of samples were investigated employing scanning electron microscopy （SEM） and transmission electron microscopy （TEM）, X-ray phase analysis （XRD）, and inductively coupled plasma optical emission spectroscopy （ICP-OES）. XRD reveals that Mg（OH）2 nanopowder with high purity has the brucite structure. It was found that crystalline Mg（OH）2 nanopowders exclusively consist of lamellar-like structures and the sizes of Mg（OH）2 are 30-265 nm length or width.展开更多
The LiMn2O4/grapbite battery was fabricated and its 3 C/10 V overcharge performance was studied. Spinel LiMn2O4 was synthesized by solid-state method and 325680-type size full battery was fabricated. The structure and...The LiMn2O4/grapbite battery was fabricated and its 3 C/10 V overcharge performance was studied. Spinel LiMn2O4 was synthesized by solid-state method and 325680-type size full battery was fabricated. The structure and morphology of the powders were characterized by XRD and SEM technique, respectively. The battery explodes after 3 C/10 V overcharged test, and surface temperature of the battery case arrives at 290 ℃ in 12 s after exploding. Black air is given out with blast. Carbon, MnO, and Li2CO3 are observed in the exploded powders. The cathode electrode remains spinel structure with 5.0 V charged. Cracks in the cathode electrode particles are detected with the increase of voltage by SEM technique. The 5.0 V charged electrode can decompose into Mn3O4 at 400 ℃. It is demonstrated that the decomposition of 5.0 V charged electrode can be promoted and Mn^4＋ can be deoxidized to Mn^2＋ by carbon and electrolyte through the simulation of blast process.展开更多
Pre-heat treatment is a vital step before cold ring rolling and it has significant effect on the microstructure and mechanical properties of rolled rings.The 100Cr6 steel rings were subjected to pre-heat treatment and...Pre-heat treatment is a vital step before cold ring rolling and it has significant effect on the microstructure and mechanical properties of rolled rings.The 100Cr6 steel rings were subjected to pre-heat treatment and subsequent cold rolling process.Scanning electron microscopy and tensile tests were applied to investigate microstructure characteristic and mechanical property variations of 100Cr6 steel rings undergoing different pre-heat treatings.The results indicate that the average diameter of carbide particles,the tensile strength and hardness increase,while the elongation decreases with the decrease of cooling rate.The cooling rate has minor effect on the yield strength of sample.After cold ring rolling,the ferrite matrix shows a clear direction along the rolling direction.The distribution of cementite is more homogeneous and the cementite particles are finer.Meanwhile,the hardness of the rolled ring is higher than that before rolling.展开更多
The preparation of microsized hematite powder from ferrous sulfate using microwave calcination was investigated based on the TG/DTG curves. The decomposition of industrial ferrous sulfate under air atmosphere was divi...The preparation of microsized hematite powder from ferrous sulfate using microwave calcination was investigated based on the TG/DTG curves. The decomposition of industrial ferrous sulfate under air atmosphere was divided into three stages, and a ferrous sulfate sample added with 15% Fe_2O_3 could strongly absorb microwave energy. Therefore, preparing hematite powder from ferrous sulfate using microwave calcination was feasible. Hematite was obtained under the following optimized conditions: calcination temperature, 850 °C; microwave power, 650 W; and sample amount, 40 g. The obtained hematite satisfied the first-grade quality requirements. The total ferrum value was more than 58%, and the total sulfur and phosphorus contents were less than 0.5% and 0.2%, respectively. X-ray powder diffraction and scanning electron microscopy were used to characterize the structure and morphology of microsized hematite powder. The particles were non-spherical in shape, and the average particle size distribution was 10.45 μm. This work provides new potential applications for waste ferrous sulfate.展开更多
Alkali metal(Li, Na, K) doped ZnO powders were synthesized by solid-state reaction at different calcination temperatures and holding time. Effects of holding time and K sources on the infrared emissivity of ZnO were i...Alkali metal(Li, Na, K) doped ZnO powders were synthesized by solid-state reaction at different calcination temperatures and holding time. Effects of holding time and K sources on the infrared emissivity of ZnO were investigated. The structure and surface morphologies of samples were characterized by X-ray diffraction(XRD) and scanning electron microscopy(SEM). The UV-Vis absorption and infrared emissivities were investigated by a UV-Vis spectrophotometer and an infrared emissometer, respectively. XRD patterns confirm the wurtzite structure of the as prepared samples with single phase. Smooth grain surfaces are detected in all doped ZnO samples, while ZnO:Li and ZnO:Na present the aggregation of grains. The redshifts in the optical band-gap are observed in K-, Na-, and Li-doped ZnO with the values 3.150, 3.144, and 3.142 eV. Due to better crystalline quality, ZnO:K shows a lower emissivity than others. The emissivity of K-doped ZnO decreases to the minimum value(0.804), at 1200 °C and holding 2 h. Compared with KNO3 as K source, K2CO3 doped ZnO has lower emissivities.展开更多
Poly （vinyl butyral） （PVB） hollow fiber membranes were fabricated via thermally induced phase separation （TIPS）. The effects of coagulation bath temperature （CBT） on the structure and performance of membranes ...Poly （vinyl butyral） （PVB） hollow fiber membranes were fabricated via thermally induced phase separation （TIPS）. The effects of coagulation bath temperature （CBT） on the structure and performance of membranes were investigated in detail. The morphologies of the membranes were studied by scanning electron microscopy （SEM）, the performances of water permeability, rejection, breaking strength and elongation were measured, respectively. The results indicate that all the membranes have the asymmetric morphology and the thickness of the skin layer decreases and the pore size of the outer layer increases with the increase of CBT. The permeability of membranes prepared at air gap 1.0 cm and take-up speed 0.253 m/s increases from 1.047×10-7 to 5.909×10-7 m3/（m2·s-kPa） with the CBT increasing from 20 ℃ to 40℃, and sharply increases to 35.226×10 7 m3/（m2.s.kPa）once the CBT arrives at 50 ℃. While the carbonic ink rejections have no significant decrease, totally exceed 98%, but that of acid-maleic acid copolymer greatly decreases with the increase of CBT. Both the breaking strength and elongation decrease with the increase of CBT.展开更多
An Al-3Ti-0.2C-1RE grain refiner was prepared by in-situ reaction method.The microstructure was investigated by optical microscopy(OM),scanning electron microscopy(SEM) equipped with energy-dispersive spectrometry(EDS...An Al-3Ti-0.2C-1RE grain refiner was prepared by in-situ reaction method.The microstructure was investigated by optical microscopy(OM),scanning electron microscopy(SEM) equipped with energy-dispersive spectrometry(EDS) and X-ray diffraction(XRD).The results show that the Al-3Ti-0.2C-1RE grain refiner is composed of α-Al,TiAl3,TiC and Ti2 Al20 Ce phases.Compared with Al-3Ti-0.2C refiner,the morphology of TiAl3 phase is changed and Ti2 Al20 Ce phases form with the addition of RE.Accordingly,the refining performance is improved.The phase forming process of the refiner is as follows: Blocky Ti2 Al20 Ce and fine blocky TiAl3 form in the melt at the initial stage of reaction,then the fine blocky TiAl3 gradually disappears,and the blocky Ti2 Al20 Ce grows bigger with the increase of holding time.The predominant mechanism to synthesize TiC particles is the reaction between high concentration of solute Ti atoms and graphite particles.展开更多
基金Supported by special fund for scientific research-related subsidy management of state level-scientific research institute for public welfare (Lanzhou Institute of Animal Science and Veterinary Pharma-ceutics,CAAS) (BRF060102)~~
文摘[Objective]Aimed to study the nature,characteristics and ultrastructure of fibers of Ovis aries and several kinds of special animals.[Method]Wool,cashmere,alpaca,Bactrian camel hairs,rabbit hair,mohair and yak hair were used as the experimental materials,and scanning electron microscopy was used to observe their scale structure.[Result]The rake angle of wool was large with an average of 33.2°,the scale density was 16.2-34.9 scales/mm,the average height of scale was 12.95 μm,and the average thickness was 0.63 μm;the rake angle of cashmere was smaller than wool with an average of 20.6°,the scale density was of 10.3-15.6 scales/mm,the scale distance was large,the average height of scale was 16.09 μm,and the average thickness was 0.46 μm;the average rake angle of alpaca was 34.6°,with the average scale height of 5.85 μm,and average thickness of 0.33 μm;the average rake angle of camel hair was 33.5°,with the average scale height of 11.30 μm and average thickness of 0.37 μm;the average rake angle of rabbit hair was 31.2°,with average scale height of 7.03 μm and average thickness of 0.36 μm;the rake angle value of mohair was between wool and cashmere,and the average of which was 23.7°,the scale density value was also between the wool and cashmere,with the average scale height of 15.82 μm and average thickness of 0.61 μm;the average rake angle yak hair was 33.2°,with the average height of 9.08 μm and average thickness of 0.46 μm.[Conclusion]The results of this study could provide a basis for the identification of different fiber types.
文摘The morphology of antennae of Aphidoletes aphidimyza was observed with a scanning electron microscope. The results showed that both male and female were fourteen segmented, the male was approximately 2000 μm and the female was 1050μm. Six types of sensillae on the antenna were observed, viz. chaetica （Ch）, trichoidea （Tr）, basiconica （Ba）, cavity （Ca）, styloid （St） and circumfila （Ci） on the antennae of A. aphidimyza. Sensillae Ch had a long external-process, with a base surrounded by membranous sockets and a length of about 67.5 μm. Sensillae Tr were distally curved and inserted into a depression, 61.0μm long. Sensillae Ba were peg-like and 4.7μm long on the antennae. Sensillae Ca were pit-like in appearance and the diameter of the pit was 1.2μm. Sensilla St was found on the second sub-segment flagellum of the male antennae. The length of the sensilla was about 21 μm and the diameter was 1.5μm. The circurnfila, which are a unique type of sensilla found only on cecidomyiid antennae, formed loops around each of the antennal sub-segments, and were attached to the surface by a series of stalks. Sensilla St was only present on male antenna. The number of Ba and Tr was almost the same in both sexes. There were more Sensilla Ca on the male antenna than on the female, while there was more Ch on the female.
基金Supported by Natural Science Foundation of Jiangsu Province(Grant number:BK2008589)Shanghai Committee(Grant num-ber:2003 #14-1)~~
文摘[ Objective] The research aimed to explore the manufacturing methods of scanning electron microscope （SEM） and transmission electron microscopy （TEM） for oocyte and provide technical support for related research. [ Method] Based on GV-and MII-stage oocytes, samples of SEM and TEM were prepared respectively, then ultrastructure changes were observed. [ Result] The results showed that the method needed few samples, keep intact cell morphology and can see clear ultrastructure. [Conclusion] The method is suitable for ultrastructural observation of oocyte.
文摘[Objective]The experiment aimed to explore a new way for observing surface structure of Nostoc sphaeroides Kutzing. [Method] The scanning electron microscope was used to observe the epidermal ultrastructure of wild and cultured Nostoc sphaeroides Kutzing. [ Result] The epidermis of wild and cultured Nostoc sphaeroides Kutzing showed mixture structure of fibril colloid which was reticular arranged. The difference between wild and cultured Nostoc sphaeroides Kutzing was that the outer epidermis of cultured Nostoc sphaeroides Kutzing had trichome distribution but the wild Nostoc sphaeroides Kutzing did not has such distribution. The obsevation results of under smaller than 10 μm by scanning electron microscope was touched thick and showed many folds and distortions. [ Conclusion] The scanning electron microscope was an effective way to study development of Nostoc sphaeroides Kutzing colony and it was worth popularizing.
基金ACKNOWLEDGMENTS This work was supported by the Natural Science Foundation of Fujian Province of China （No.2007J0317 and No.JB06104） and the Key project of Fujian Provincial Department of Science and Technology （No.2007H0019）.
文摘ZnO nanobelts, hollow microspheres, and urchins have been prepared on copper foil via a simply low temperature evaporation route. The microstructure, morphologies, and photolu-minescence of the ZnO nanostructures were studied with X-ray diffraction, Raman spectra, scanning electron microscopy and photoluminescence spectra. The width of the nanobelts was about 500 nm and the length was longer than 10μm. The diameter of the hollow microspheres was between 5 and 10μm. A possible growth mechanism of the nanobelts, microspheres and urchins was proposed. The photoluminescence spectrum exhibited strong deep level energy emissions and a weak near band edge emission. These ZnO nanostructures on a copper substrate have the advantages of naturally good adhesion and electrical connection between the ZnO nanostructures and the conductive substrate.
文摘Numerous leaf compressions of Glyptostrobus europaeus (Brongn.) Ung. (Taxodiaceae) are found in Aquitanian (Lower Miocene) lignified clay localities Bolattam and Akzhar in the Southern Turgay, on the right bank of the Dulygaly-Zhilanshik river (Central Kazakhstan). The finely preserved lignified compression remains of leafy shoots make micro-morphological investigation feasible. Comparative studies of the epidermal features both living G. pensilis C. Koch and a new finding of G. europaeus from Early Miocene of Kazakhstan and illustrate their certain difference. The cuticular organization and epidermal features of fossil leaves, which have been compared with these of 'the nearest living relative', G. pensilis, were studied by scanning electron microscopy (SEM) and light microscopy (LM). The fossil leaves of G. europaeus from Kazakhstan are distinguished by stronger, than in living species, G. pensilis, developed 'micro-papillae' ('Kristallucken'), visible in SEM as ring-like structures left on the outer surface of cuticle in both nonstomatal and stomatal zones.
基金the state on behalf of the Ministry of Education and Science of the Russian Federation of the Agreement (No. 14.577.21.0111 (22 September 2014))The unique identifier of the applied research (No. RFMEFI57714X0111)
文摘In this paper we describe a route to produce crystalline Mg（OH）2 nanopowders from serpentinite ore distributed in the Halilovskiy array （Russia, Orenburg region）. An efficient extraction route consisting of treatment on serpentinite in 40% HNO3 at 80 ℃followed by NH4OH titration for Mg（OH）2 precipitation was demonstrated. In this study, crystalline Mg（OH）2 nanopowders have been synthesized by solvothermal reaction method using （Mg（NO3）2·6H2O） which were obtained from serpentinite, NH4OH as a precipitator, and hydroxyethylated nonylphenol as surface-active substance. Microstructure and phase composition of samples were investigated employing scanning electron microscopy （SEM） and transmission electron microscopy （TEM）, X-ray phase analysis （XRD）, and inductively coupled plasma optical emission spectroscopy （ICP-OES）. XRD reveals that Mg（OH）2 nanopowder with high purity has the brucite structure. It was found that crystalline Mg（OH）2 nanopowders exclusively consist of lamellar-like structures and the sizes of Mg（OH）2 are 30-265 nm length or width.
基金Project(2007CB613607) supported by the National Basic Research Program of China
文摘The LiMn2O4/grapbite battery was fabricated and its 3 C/10 V overcharge performance was studied. Spinel LiMn2O4 was synthesized by solid-state method and 325680-type size full battery was fabricated. The structure and morphology of the powders were characterized by XRD and SEM technique, respectively. The battery explodes after 3 C/10 V overcharged test, and surface temperature of the battery case arrives at 290 ℃ in 12 s after exploding. Black air is given out with blast. Carbon, MnO, and Li2CO3 are observed in the exploded powders. The cathode electrode remains spinel structure with 5.0 V charged. Cracks in the cathode electrode particles are detected with the increase of voltage by SEM technique. The 5.0 V charged electrode can decompose into Mn3O4 at 400 ℃. It is demonstrated that the decomposition of 5.0 V charged electrode can be promoted and Mn^4＋ can be deoxidized to Mn^2＋ by carbon and electrolyte through the simulation of blast process.
基金Project(2011CB706605)supported by the National Basic Research Program of ChinaProject(2011CDA12)supported by the Innovative Research Groups of the Natural Science Foundation of Hubei Province,ChinaProjects(2012-Ia-017,2013-IV-014)supported by the Fundamental Research Funds for the Central Universities,China
文摘Pre-heat treatment is a vital step before cold ring rolling and it has significant effect on the microstructure and mechanical properties of rolled rings.The 100Cr6 steel rings were subjected to pre-heat treatment and subsequent cold rolling process.Scanning electron microscopy and tensile tests were applied to investigate microstructure characteristic and mechanical property variations of 100Cr6 steel rings undergoing different pre-heat treatings.The results indicate that the average diameter of carbide particles,the tensile strength and hardness increase,while the elongation decreases with the decrease of cooling rate.The cooling rate has minor effect on the yield strength of sample.After cold ring rolling,the ferrite matrix shows a clear direction along the rolling direction.The distribution of cementite is more homogeneous and the cementite particles are finer.Meanwhile,the hardness of the rolled ring is higher than that before rolling.
基金Project(2013AA064003)supported by the National Technology Research and Development Program of ChinaProject(51564033)supported by the National Natural Science Foundation of ChinaProject(2016FA023)supported by the Yunnan Applied Basic Research(CNMRCUXT1403)State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization,Kunming University of Science and Technology,China
文摘The preparation of microsized hematite powder from ferrous sulfate using microwave calcination was investigated based on the TG/DTG curves. The decomposition of industrial ferrous sulfate under air atmosphere was divided into three stages, and a ferrous sulfate sample added with 15% Fe_2O_3 could strongly absorb microwave energy. Therefore, preparing hematite powder from ferrous sulfate using microwave calcination was feasible. Hematite was obtained under the following optimized conditions: calcination temperature, 850 °C; microwave power, 650 W; and sample amount, 40 g. The obtained hematite satisfied the first-grade quality requirements. The total ferrum value was more than 58%, and the total sulfur and phosphorus contents were less than 0.5% and 0.2%, respectively. X-ray powder diffraction and scanning electron microscopy were used to characterize the structure and morphology of microsized hematite powder. The particles were non-spherical in shape, and the average particle size distribution was 10.45 μm. This work provides new potential applications for waste ferrous sulfate.
基金Project(JB141405)supported by the Fundamental Research Funds for the Central Universities of China
文摘Alkali metal(Li, Na, K) doped ZnO powders were synthesized by solid-state reaction at different calcination temperatures and holding time. Effects of holding time and K sources on the infrared emissivity of ZnO were investigated. The structure and surface morphologies of samples were characterized by X-ray diffraction(XRD) and scanning electron microscopy(SEM). The UV-Vis absorption and infrared emissivities were investigated by a UV-Vis spectrophotometer and an infrared emissometer, respectively. XRD patterns confirm the wurtzite structure of the as prepared samples with single phase. Smooth grain surfaces are detected in all doped ZnO samples, while ZnO:Li and ZnO:Na present the aggregation of grains. The redshifts in the optical band-gap are observed in K-, Na-, and Li-doped ZnO with the values 3.150, 3.144, and 3.142 eV. Due to better crystalline quality, ZnO:K shows a lower emissivity than others. The emissivity of K-doped ZnO decreases to the minimum value(0.804), at 1200 °C and holding 2 h. Compared with KNO3 as K source, K2CO3 doped ZnO has lower emissivities.
基金Project(21176264)supported by the National Natural Science Foundation of ChinaProject(11JJ2010)supported by the Hunan Provincial Natural Science Foundation of China
文摘Poly （vinyl butyral） （PVB） hollow fiber membranes were fabricated via thermally induced phase separation （TIPS）. The effects of coagulation bath temperature （CBT） on the structure and performance of membranes were investigated in detail. The morphologies of the membranes were studied by scanning electron microscopy （SEM）, the performances of water permeability, rejection, breaking strength and elongation were measured, respectively. The results indicate that all the membranes have the asymmetric morphology and the thickness of the skin layer decreases and the pore size of the outer layer increases with the increase of CBT. The permeability of membranes prepared at air gap 1.0 cm and take-up speed 0.253 m/s increases from 1.047×10-7 to 5.909×10-7 m3/（m2·s-kPa） with the CBT increasing from 20 ℃ to 40℃, and sharply increases to 35.226×10 7 m3/（m2.s.kPa）once the CBT arrives at 50 ℃. While the carbonic ink rejections have no significant decrease, totally exceed 98%, but that of acid-maleic acid copolymer greatly decreases with the increase of CBT. Both the breaking strength and elongation decrease with the increase of CBT.
基金Project(51174177)supported by the National Natural Science Foundation of China
文摘An Al-3Ti-0.2C-1RE grain refiner was prepared by in-situ reaction method.The microstructure was investigated by optical microscopy(OM),scanning electron microscopy(SEM) equipped with energy-dispersive spectrometry(EDS) and X-ray diffraction(XRD).The results show that the Al-3Ti-0.2C-1RE grain refiner is composed of α-Al,TiAl3,TiC and Ti2 Al20 Ce phases.Compared with Al-3Ti-0.2C refiner,the morphology of TiAl3 phase is changed and Ti2 Al20 Ce phases form with the addition of RE.Accordingly,the refining performance is improved.The phase forming process of the refiner is as follows: Blocky Ti2 Al20 Ce and fine blocky TiAl3 form in the melt at the initial stage of reaction,then the fine blocky TiAl3 gradually disappears,and the blocky Ti2 Al20 Ce grows bigger with the increase of holding time.The predominant mechanism to synthesize TiC particles is the reaction between high concentration of solute Ti atoms and graphite particles.
