China’s first high-pressure hydraulically coupled rock-breaking tunnel boring machine(TBM) was designed to overcome the rock breaking problems of TBM in super-hard rock geology, where high-pressure water jet system i...China’s first high-pressure hydraulically coupled rock-breaking tunnel boring machine(TBM) was designed to overcome the rock breaking problems of TBM in super-hard rock geology, where high-pressure water jet system is configured, including high-flow pump sets, high-pressure rotary joint and high-pressure water jet injection device. In order to investigate the rock breaking performance of high-pressure water-jet-assisted TBM, in situ excavation tests were carried out at the Wan’anxi Water Diversion Project in Longyan, Fujian Province, China, under different water jet pressure and rotational speed. The rock-breaking performance of TBM was analyzed including penetration, cutterhead load, advance rate and field penetration index. The test results show that the adoption of high-pressure water-jet-assisted rock breaking technology can improve the boreability of rock mass, where the TBM penetration increases by 64% under the water jet pressure of 270 MPa. In addition, with the increase of the water jet pressure, the TBM penetration increases and the field penetration index decreases. The auxiliary rock-breaking effect of high-pressure water jet decreases with the increase of cutterhead rotational speed. In the case of the in situ tunneling test parameters of this study, the advance rate is the maximum when the pressure of the high-pressure water jet is 270 MPa and the cutterhead rotational speed is 6 r/min. The technical superiority of high-pressure water-jet-assisted rock breaking technology is highlighted and it provides guidance for the excavation parameter selection of high-pressure hydraulically coupled rock-breaking TBM.展开更多
We investigate the large-scale substorm current systems developed from its onset in an idealized substorm event simulated by global magnetohydrodynamic(MHD) models. Mainly three current systems(loops) are revealed:(1)...We investigate the large-scale substorm current systems developed from its onset in an idealized substorm event simulated by global magnetohydrodynamic(MHD) models. Mainly three current systems(loops) are revealed:(1) the classical substorm current wedge, which is composed by the disputed cross-tail current in the magnetotail, the nightside westward electrojet in the high-latitude ionosphere and a pair of region 1 field-aligned currents(FAC);(2) the partial-ring current system, which is braced by two region 2 FACs; and(3) the meridional current system, which is formed by an equatorial radial current(outward/inward in the morning/evening sector), and region 1 and region 2 FACs at its two ends. The region 2 FAC connects with region 1 FAC by a latitudinal horizontal current at each morning/evening ionosphere to complete Loops 2 and 3. A quantitative study shows the significant enhancement of these current systems during the substorm expansion phase, while Loop 1 dominates, which can reach a magnitude of ~1 MA. Empirical relations among the ionospheric currents and the related magnetotail currents are established based on the simulation results, implying that the substonn current systems are not evolved locally or separately, but must be viewed from a global perspective. This knowledge of large-scale substorm current system would deepen our understanding of the substorm development and could be validated by observations in the future.展开更多
Highly adhesive cold cathodes with high field emission performance are fabricated by using a screen-print- ing method. The emission density of carbon nanotube （CNT） cold cathode reaches 207.0 mA cm-2 at an electric ...Highly adhesive cold cathodes with high field emission performance are fabricated by using a screen-print- ing method. The emission density of carbon nanotube （CNT） cold cathode reaches 207.0 mA cm-2 at an electric field of 4.5 Vμm-1 under continuous driving mode, and high peak current emission of 315.8 mA corresponding to 4.5 A cm 2 at the electric field of 10.3 V μm-1 under pulsed driving mode. The emission patterns of the cold cathodes are of excellent uniformity that was revealed by vivid luminescent patterns of phosphor coated transparent indium tin oxide （ITO） an- ode. The cold cathodes also exhibit highly stable emission under continuous and pulsed driving modes. The high adhe- sion of CNTs to molybdenum substrates results in robust cold cathodes and is responsible for the high field emission performance. This robust CNT emitter could meet the operating requirements of continuous and pulsed electron sources, and it provides promising applications in various vacuum- micro/nanoelectronic devices.展开更多
An increase of turbine blade loading can reduce the numbers of blade and stage of gas turbines. However, an increase of blade loading makes the secondary flow much stronger because of the steep pitch-wise pressure gra...An increase of turbine blade loading can reduce the numbers of blade and stage of gas turbines. However, an increase of blade loading makes the secondary flow much stronger because of the steep pitch-wise pressure gradient in the cascade passage, and consequently deteriorates the turbine efficiency. In this study, the computations were performed for the flow in an ultra-highly loaded turbine cascade with high turning angle in order to clarify the effects of the incidence angle on the two dimensional flow and the secondary flow in the cascade passage, which cause the profile loss and the secondary loss, respectively. The computed results showed good agreement with the experimental surface oil flow visualizations and the blade surface static pressure at mid-span of the blade. The profile loss was strongly increased by the increase of incidence angle especially in the positive range. Moreover, the positive incidences not only strengthened the horseshoe vortex and the passage vortex but also induced a new vortex on the end-wall. Moreover, the newly formed vortex influenced the formation of the pressure side leg of horseshoe vortex.展开更多
基金Project(2020YFF0426370) supported by the National Key Research and Development Program of ChinaProject(SF-202010) supported by the Water Conservancy Technology Demonstration,China。
文摘China’s first high-pressure hydraulically coupled rock-breaking tunnel boring machine(TBM) was designed to overcome the rock breaking problems of TBM in super-hard rock geology, where high-pressure water jet system is configured, including high-flow pump sets, high-pressure rotary joint and high-pressure water jet injection device. In order to investigate the rock breaking performance of high-pressure water-jet-assisted TBM, in situ excavation tests were carried out at the Wan’anxi Water Diversion Project in Longyan, Fujian Province, China, under different water jet pressure and rotational speed. The rock-breaking performance of TBM was analyzed including penetration, cutterhead load, advance rate and field penetration index. The test results show that the adoption of high-pressure water-jet-assisted rock breaking technology can improve the boreability of rock mass, where the TBM penetration increases by 64% under the water jet pressure of 270 MPa. In addition, with the increase of the water jet pressure, the TBM penetration increases and the field penetration index decreases. The auxiliary rock-breaking effect of high-pressure water jet decreases with the increase of cutterhead rotational speed. In the case of the in situ tunneling test parameters of this study, the advance rate is the maximum when the pressure of the high-pressure water jet is 270 MPa and the cutterhead rotational speed is 6 r/min. The technical superiority of high-pressure water-jet-assisted rock breaking technology is highlighted and it provides guidance for the excavation parameter selection of high-pressure hydraulically coupled rock-breaking TBM.
基金supported by the National Natural Science Foundation of China(Grant Nos.41474145 and 41574159)the Specialized Research Fund for State Key Laboratories of China
文摘We investigate the large-scale substorm current systems developed from its onset in an idealized substorm event simulated by global magnetohydrodynamic(MHD) models. Mainly three current systems(loops) are revealed:(1) the classical substorm current wedge, which is composed by the disputed cross-tail current in the magnetotail, the nightside westward electrojet in the high-latitude ionosphere and a pair of region 1 field-aligned currents(FAC);(2) the partial-ring current system, which is braced by two region 2 FACs; and(3) the meridional current system, which is formed by an equatorial radial current(outward/inward in the morning/evening sector), and region 1 and region 2 FACs at its two ends. The region 2 FAC connects with region 1 FAC by a latitudinal horizontal current at each morning/evening ionosphere to complete Loops 2 and 3. A quantitative study shows the significant enhancement of these current systems during the substorm expansion phase, while Loop 1 dominates, which can reach a magnitude of ~1 MA. Empirical relations among the ionospheric currents and the related magnetotail currents are established based on the simulation results, implying that the substonn current systems are not evolved locally or separately, but must be viewed from a global perspective. This knowledge of large-scale substorm current system would deepen our understanding of the substorm development and could be validated by observations in the future.
基金supported by the National Natural Science Foundation of China(51002161)One-Three-Five Strategic Planning of Chinese Academy of Sciences
文摘Highly adhesive cold cathodes with high field emission performance are fabricated by using a screen-print- ing method. The emission density of carbon nanotube （CNT） cold cathode reaches 207.0 mA cm-2 at an electric field of 4.5 Vμm-1 under continuous driving mode, and high peak current emission of 315.8 mA corresponding to 4.5 A cm 2 at the electric field of 10.3 V μm-1 under pulsed driving mode. The emission patterns of the cold cathodes are of excellent uniformity that was revealed by vivid luminescent patterns of phosphor coated transparent indium tin oxide （ITO） an- ode. The cold cathodes also exhibit highly stable emission under continuous and pulsed driving modes. The high adhe- sion of CNTs to molybdenum substrates results in robust cold cathodes and is responsible for the high field emission performance. This robust CNT emitter could meet the operating requirements of continuous and pulsed electron sources, and it provides promising applications in various vacuum- micro/nanoelectronic devices.
文摘An increase of turbine blade loading can reduce the numbers of blade and stage of gas turbines. However, an increase of blade loading makes the secondary flow much stronger because of the steep pitch-wise pressure gradient in the cascade passage, and consequently deteriorates the turbine efficiency. In this study, the computations were performed for the flow in an ultra-highly loaded turbine cascade with high turning angle in order to clarify the effects of the incidence angle on the two dimensional flow and the secondary flow in the cascade passage, which cause the profile loss and the secondary loss, respectively. The computed results showed good agreement with the experimental surface oil flow visualizations and the blade surface static pressure at mid-span of the blade. The profile loss was strongly increased by the increase of incidence angle especially in the positive range. Moreover, the positive incidences not only strengthened the horseshoe vortex and the passage vortex but also induced a new vortex on the end-wall. Moreover, the newly formed vortex influenced the formation of the pressure side leg of horseshoe vortex.
