A solid-phase sintering process for the low-cost fabrication of composite micro-channels was developed. Three kinds of composite micro-channels with metallic porous structures were designed. The sintering process was ...A solid-phase sintering process for the low-cost fabrication of composite micro-channels was developed. Three kinds of composite micro-channels with metallic porous structures were designed. The sintering process was studied and optimized to obtain porous-structured micro-channels with high porosity. The flow resistance and heat transfer performance in the composite micro-channels were investigated. The composite micro-channels show acceptable flow resistance, significant enhancement of heat transfer and dramatic improvement of flow boiling stability, which indicates a promising prospect for the application in forced convective heat transfer.展开更多
Today, energy saving is one of the main objectives for engineers. In the case of mobile applications, energy can be saved by two different ways： decreasing the total masse of the system and increasing the efficiency ...Today, energy saving is one of the main objectives for engineers. In the case of mobile applications, energy can be saved by two different ways： decreasing the total masse of the system and increasing the efficiency of the overall system. This paper presents two optimization strategies to design a predefined multichannel structure of a boost converter which is dedicated to a solar airplane and used to interface PV panels and the battery system. The first strategy is a multi-criterion method that is able to trace the dependency between the converter＇s efficiency and its power density through the intermediary of the Pareto front. The second method, a mono-criterion approach, maximizes efficiency while respecting the constraint imposed on power density. The mono-criterion method that is applied to maximizing the European efficiency criterion showed that an increase in the number of channels enhanced the quantity of energy collected over a day by increasing the power density of the converter. At the end of the paper, the optimal design calculated was built to give an example of the result obtained by this design methodology. The results of the efficiency measurements made on a realized prototype are presented in this paper.展开更多
In order to improve the corrosion resistance of nanoporous coppers （NPCs）, the electroless Ni-P coated NPCs were prepared in plating solutions with different pH values （5, 8, 11） and complexing agent （actic acid,...In order to improve the corrosion resistance of nanoporous coppers （NPCs）, the electroless Ni-P coated NPCs were prepared in plating solutions with different pH values （5, 8, 11） and complexing agent （actic acid, citric acid）. The morphologies and cor- rosion resistances of the as-prepared samples were investigated. The results showed that the double complexing agent com- posed of lactic acid and citric acid is relatively suitable for preparing the Ni-P coated NPC with three-dimensional continuous interpenetrating ligament-channel structures, and the uniform ligaments and nanoporous channels could be obtained at pH8. The Ni-P coated NPC showed higher corrosion potentials than NPC in H2S04, NaOH and NaC1 corrosion solutions.展开更多
基金Project(51146010)supported by the National Natural Science Foundation of ChinaProject(S2011040003189)supported by the Doctoral Research Fund of Guangdong Natural Science Foundation,ChinaProject supported by the Fundation of Key Laboratory of Surface Functional Structure Manufacturing of Guangdong Higher Education Institutes,South China University of Technology
文摘A solid-phase sintering process for the low-cost fabrication of composite micro-channels was developed. Three kinds of composite micro-channels with metallic porous structures were designed. The sintering process was studied and optimized to obtain porous-structured micro-channels with high porosity. The flow resistance and heat transfer performance in the composite micro-channels were investigated. The composite micro-channels show acceptable flow resistance, significant enhancement of heat transfer and dramatic improvement of flow boiling stability, which indicates a promising prospect for the application in forced convective heat transfer.
文摘Today, energy saving is one of the main objectives for engineers. In the case of mobile applications, energy can be saved by two different ways： decreasing the total masse of the system and increasing the efficiency of the overall system. This paper presents two optimization strategies to design a predefined multichannel structure of a boost converter which is dedicated to a solar airplane and used to interface PV panels and the battery system. The first strategy is a multi-criterion method that is able to trace the dependency between the converter＇s efficiency and its power density through the intermediary of the Pareto front. The second method, a mono-criterion approach, maximizes efficiency while respecting the constraint imposed on power density. The mono-criterion method that is applied to maximizing the European efficiency criterion showed that an increase in the number of channels enhanced the quantity of energy collected over a day by increasing the power density of the converter. At the end of the paper, the optimal design calculated was built to give an example of the result obtained by this design methodology. The results of the efficiency measurements made on a realized prototype are presented in this paper.
基金supported by the National Natural Science Foundation of China(Grant Nos.51174161,51202191)Scientific and Technological Innovation and Co-ordination Funded by Science and Technology Department of Shaanxi Province,China(Grant No.2012KPCQ01-14)+1 种基金A part of this work was also supported by Natural Science Basic Research Plan in Shaanxi Province of China(Grant No.2012JQ6002)Scientific Research Program Funded by Shaanxi Provincial Education Department(Grant No.12JK0427)
文摘In order to improve the corrosion resistance of nanoporous coppers （NPCs）, the electroless Ni-P coated NPCs were prepared in plating solutions with different pH values （5, 8, 11） and complexing agent （actic acid, citric acid）. The morphologies and cor- rosion resistances of the as-prepared samples were investigated. The results showed that the double complexing agent com- posed of lactic acid and citric acid is relatively suitable for preparing the Ni-P coated NPC with three-dimensional continuous interpenetrating ligament-channel structures, and the uniform ligaments and nanoporous channels could be obtained at pH8. The Ni-P coated NPC showed higher corrosion potentials than NPC in H2S04, NaOH and NaC1 corrosion solutions.
