Based on a ripped-up and rerouted methodology,a multilayer area detailed router is presented by using simulated evolution technique.A modified maze algorithm is also performed for the single net.
The random distribution problem of dendrite preferred growth direction was settled by random grid method.This method was used to study the influence of forced laminar flow effect on multiple grains during solidificati...The random distribution problem of dendrite preferred growth direction was settled by random grid method.This method was used to study the influence of forced laminar flow effect on multiple grains during solidification.Taking high pure succinonitrile （SCN） undercooled melt as an example,the forced laminar flow effect on multiple grains was studied by phase-field model of single grain which coupled with flow equations at non-isothermal condition.The simulation results show that the random grid method can reasonably settle the problem of random distribution and is more effective.When the solid fraction is relatively low,melt particles flow around the downstream side of dendrite,and the flow velocity between two dendrite arms becomes high.At the stage of solidification time less than 1800Δt,every dendrite grows freely;the upstream dendrites are stronger than the downstream ones.The higher the melt flow rate,the higher the solid fraction.However,when the solid fraction is relatively high,the dendrite arm intertwins and only a little residual melt which is not encapsulated can flow;the solid fraction will gradually tend to equal to solid fraction of melt without flow.展开更多
Based on the characteristics of the strong volatility of physical property in vertical direction, high gas content, high resource abundance and large exploitation potentiality of coal reservoir in Bide-Santang basin o...Based on the characteristics of the strong volatility of physical property in vertical direction, high gas content, high resource abundance and large exploitation potentiality of coal reservoir in Bide-Santang basin of Zhina coal field, we study the generation mechanism of interlayer interference, propagation rules of reservoir pressure drop and influencing factors of gas productivity in CBM multi-seam drainage in the paper. On the basis of the actual production data of X-2 well of Zhucang syncline in Bide-Santang basin,by simulating the gas production process of a CBM well under the condition of multiple seam with COMET3 numerical simulation software, we analyze the influencing factors of gas productivity during the process of multi-seam drainage, and illuminate the interlayer interference mechanism of multiseam drainage. The results show that permeability, reservoir pressure gradient, critical desorption pressure and fluid supply capacity of stratum have great influence on gas productivity of multi-seam drainage while coal thickness has little influence on it. Permeability, reservoir pressure gradient and fluid supply capacity of stratum affect the propagation velocity of reservoir pressure drop and thereby affect the final gas productivity. Moreover, the influence of critical desorption pressure on gas productivity of multiseam drainage is reflected in the gas breakthrough time and effective desorption area.展开更多
Cased explosives generate highly energetic fragments as their casing breaks up. Due to the complexity of casing fragment related behavior such as embedment, perforation and ricochet, it may be insufficient to use equi...Cased explosives generate highly energetic fragments as their casing breaks up. Due to the complexity of casing fragment related behavior such as embedment, perforation and ricochet, it may be insufficient to use equivalent triangular pressure loading in fragment impact simulations. This simplified method may over- or under-predict the target response. Recently, a procedure using contact techniques has been proposed to overcome such difficulties. It has been shown that the new method has the inherent capability in modeling the multi-piece and multi-hit fragment impact problems in a more realistic way. To investigate the applicability of the proposed method to simulations involving multi-layer penetration, the selected problems of fragment impact on multi-layer targets are described in this paper. It is demonstrated that this method is capable of predicting the complicated multi-layer structural response caused by fragment impact and penetration. Modeling procedures and some technical issues are also discussed.展开更多
Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modification techniques including grind using silicon-carbide(...Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modification techniques including grind using silicon-carbide(SiC) paper, acid etching and alkali treatment were employed to produce either irregularly rough surface or micro-porous surface roughness. X-ray diffractometry(XRD), scanning electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDX) attached to SEM were used to characterize surface structure and the Ca-P coatings. Effects of the above surface treatments on the surface morphology, apatite forming ability were systematically investigated. Results indicate that all the above surface treatments increase the apatite forming ability of TiNi alloys in varying degrees when soaked in simulated body fluid(SBF). More apatite coatings formed on TiNi samples sintered at 1050℃ and 1100℃ due to their high porosity and pure TiNi phase that is beneficial to heterogeneous nucleation. Furthermore, more uniform apatite was fabricated on the sample sintered from the mixture of Ni and Ti powders.展开更多
A problem of a hierarchy structure optimization is considered.Hierarchical structures arewidely used in the Analytic Hierarchy Process,conjoint analysis,and various other methods of multiplecriteria decision making.Th...A problem of a hierarchy structure optimization is considered.Hierarchical structures arewidely used in the Analytic Hierarchy Process,conjoint analysis,and various other methods of multiplecriteria decision making.The problem consists in finding a structure that needs a minimum number ofpair comparisons for a given total number of the alternatives.For an optimal hierarchy,the minimumefforts are needed for eliciting data and synthesizing the local preferences across the hierarchy to getthe global priorities or utilities.Special estimation techniques are developed and numerical simulationsperformed.Analytical and numerical results suggest optimal ways of priority evaluations for practicalmanagerial decisions in a complex environment.展开更多
文摘Based on a ripped-up and rerouted methodology,a multilayer area detailed router is presented by using simulated evolution technique.A modified maze algorithm is also performed for the single net.
基金Project(10964004) supported by the National Natural Science Foundation of ChinaProject(20070731001) supported by Research Fund for the Doctoral Program of China+1 种基金 Project(096RJZA104) supported by the Natural Science Foundation of Gansu Province,ChinaProject(SB14200801) supported by the Doctoral Fund of Lanzhou University of Technology,China
文摘The random distribution problem of dendrite preferred growth direction was settled by random grid method.This method was used to study the influence of forced laminar flow effect on multiple grains during solidification.Taking high pure succinonitrile （SCN） undercooled melt as an example,the forced laminar flow effect on multiple grains was studied by phase-field model of single grain which coupled with flow equations at non-isothermal condition.The simulation results show that the random grid method can reasonably settle the problem of random distribution and is more effective.When the solid fraction is relatively low,melt particles flow around the downstream side of dendrite,and the flow velocity between two dendrite arms becomes high.At the stage of solidification time less than 1800Δt,every dendrite grows freely;the upstream dendrites are stronger than the downstream ones.The higher the melt flow rate,the higher the solid fraction.However,when the solid fraction is relatively high,the dendrite arm intertwins and only a little residual melt which is not encapsulated can flow;the solid fraction will gradually tend to equal to solid fraction of melt without flow.
基金supported by the National Major Special Project of Science and Technology of China (No.2011ZX05034)the Innovation Projects of University Graduates in Jiangsu Province (No.CXLX13_948)+1 种基金the National Natural Science Foundation of China (No.41272178)the Natural Science Foundation of Hunan Province (No.2016JJ4031)
文摘Based on the characteristics of the strong volatility of physical property in vertical direction, high gas content, high resource abundance and large exploitation potentiality of coal reservoir in Bide-Santang basin of Zhina coal field, we study the generation mechanism of interlayer interference, propagation rules of reservoir pressure drop and influencing factors of gas productivity in CBM multi-seam drainage in the paper. On the basis of the actual production data of X-2 well of Zhucang syncline in Bide-Santang basin,by simulating the gas production process of a CBM well under the condition of multiple seam with COMET3 numerical simulation software, we analyze the influencing factors of gas productivity during the process of multi-seam drainage, and illuminate the interlayer interference mechanism of multiseam drainage. The results show that permeability, reservoir pressure gradient, critical desorption pressure and fluid supply capacity of stratum have great influence on gas productivity of multi-seam drainage while coal thickness has little influence on it. Permeability, reservoir pressure gradient and fluid supply capacity of stratum affect the propagation velocity of reservoir pressure drop and thereby affect the final gas productivity. Moreover, the influence of critical desorption pressure on gas productivity of multiseam drainage is reflected in the gas breakthrough time and effective desorption area.
文摘Cased explosives generate highly energetic fragments as their casing breaks up. Due to the complexity of casing fragment related behavior such as embedment, perforation and ricochet, it may be insufficient to use equivalent triangular pressure loading in fragment impact simulations. This simplified method may over- or under-predict the target response. Recently, a procedure using contact techniques has been proposed to overcome such difficulties. It has been shown that the new method has the inherent capability in modeling the multi-piece and multi-hit fragment impact problems in a more realistic way. To investigate the applicability of the proposed method to simulations involving multi-layer penetration, the selected problems of fragment impact on multi-layer targets are described in this paper. It is demonstrated that this method is capable of predicting the complicated multi-layer structural response caused by fragment impact and penetration. Modeling procedures and some technical issues are also discussed.
基金Project(51274247) supported by the National Natural Science Foundation of ChinaProject(2014zzts177) support by the Fundamental Research Funds for the Central Universities,China
文摘Porous and dense TiNi alloys were successfully fabricated by powder metallurgy(P/M) method, and to further improve their surface biocompatibility, surface modification techniques including grind using silicon-carbide(SiC) paper, acid etching and alkali treatment were employed to produce either irregularly rough surface or micro-porous surface roughness. X-ray diffractometry(XRD), scanning electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDX) attached to SEM were used to characterize surface structure and the Ca-P coatings. Effects of the above surface treatments on the surface morphology, apatite forming ability were systematically investigated. Results indicate that all the above surface treatments increase the apatite forming ability of TiNi alloys in varying degrees when soaked in simulated body fluid(SBF). More apatite coatings formed on TiNi samples sintered at 1050℃ and 1100℃ due to their high porosity and pure TiNi phase that is beneficial to heterogeneous nucleation. Furthermore, more uniform apatite was fabricated on the sample sintered from the mixture of Ni and Ti powders.
文摘A problem of a hierarchy structure optimization is considered.Hierarchical structures arewidely used in the Analytic Hierarchy Process,conjoint analysis,and various other methods of multiplecriteria decision making.The problem consists in finding a structure that needs a minimum number ofpair comparisons for a given total number of the alternatives.For an optimal hierarchy,the minimumefforts are needed for eliciting data and synthesizing the local preferences across the hierarchy to getthe global priorities or utilities.Special estimation techniques are developed and numerical simulationsperformed.Analytical and numerical results suggest optimal ways of priority evaluations for practicalmanagerial decisions in a complex environment.
