Microbial fuel cells have already been used as biosensors to monitor assimilable organic carbon(AOC).However,their signal production from AOC is known to be completely suppressed by dissoved oxygen(DO).In this study,t...Microbial fuel cells have already been used as biosensors to monitor assimilable organic carbon(AOC).However,their signal production from AOC is known to be completely suppressed by dissoved oxygen(DO).In this study,two identical microbial electrolysis cell(MEC)based biosensors were inoculated with marine sediment and operated at two different anodic potentials,namely-300 mV and+250 mV relative to Ag/AgCl.The MEC biosensor operated under positive anodic potential conditions had electrochemically active microbial communities on the anode,including members of the Shewanellaceae,Pseudoalteromonadaceae,and Clostridiaceae families.However,the strictly anaerobic members of the Desulfuromonadaceae,Desulfobulbaceae and Desulfobacteraceae families were found only in the negative anodic potential MEC biosensor.The positive anodic potential MEC biosensor showed several other advantages as well,such as faster start-up,significantly higher maximum current production,fivefold improvement in the AOC detection limit,and tolerance of low dissolved oxygen,compared to those obtained from the negative anodic potential MEC biosensor.The developed positive anodic potential MEC biosensor can thus be used as a real-time and inexpensive detector of AOC concentrations in high saline and low DO seawater.展开更多
The vector correlations between products and reagents for the title reactions have been calculated by the quasi-classical trajectory method at a collision energy of 21.32 kJ/mol on an accurate potential energy surface...The vector correlations between products and reagents for the title reactions have been calculated by the quasi-classical trajectory method at a collision energy of 21.32 kJ/mol on an accurate potential energy surface of Ho et al. （J. Chem. Phys. 119, 3063 （2003））. The peaks of the product angular distribution are found to be in both backward and forward directions for the two title reactions. The product rotational angular momentum is not only aligned, but also oriented along the negative direction of y-axis. These theoretical results are in good agreement with recent experimental findings for the two title reactions. The isotopic effect is also revealed and primarily attributed to the difference of the mass factor in the two title reactions.展开更多
A simple method used for simultaneous measurement of phase retardation and optic axis of wave plate by employing 1/4 wave plate is demonstrated. The theoretical analysis of the measuring principle is presented in deta...A simple method used for simultaneous measurement of phase retardation and optic axis of wave plate by employing 1/4 wave plate is demonstrated. The theoretical analysis of the measuring principle is presented in detail. In the measurement, after adjusting a standard 1/4 wave plate and the fast (slow) axis of the plate to be measured parallel to the pass axis of the polarizer, the plate to be measured is rotated by 450 counterclockwisly. A stepping motor is used to rotate the analyzer. The experimental data are collected by a photodetector and then sent to a computer. According to the output data curve, the phase retardation and optic axis of the plate to be measured can be obtained simultaneously. To test the feasibility of the method, a λ /2 and a λ /8 wave plates are used as examples to demonstrate the measurement procedures. The phase retardation measurement accuracy is better than 0.5×10-2. This method can be used to measure the arbitrary phase retardation conveniently.展开更多
Reagents are optimized for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in zinc sulfate solution, which contains an extremely large excess of Zn^(2+). First, the reagents and their d...Reagents are optimized for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in zinc sulfate solution, which contains an extremely large excess of Zn^(2+). First, the reagents and their doses for the experiment are selected according to the characteristics of the zinc sulfate solution. Then, the reagent doses are optimized by analyzing the influence of reagent dose on the polarographic parameters(i.e. half-wave potential E_(1/2) and limiting diffusion current I_p). Finally, the optimization results are verified by simultaneously determining trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+). The determination results indicate that the optimized reagents exhibit wide linearity, low detection limits, high accuracy and good precision for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+).展开更多
The electrocatalytic oxidation of methanol was studied over Ni, Co and Cu binary or ternary alloys on graphite electrodes in a NaOH solution （0.1 mol/L）. The catalysts were prepared by cycling the graphite electrode...The electrocatalytic oxidation of methanol was studied over Ni, Co and Cu binary or ternary alloys on graphite electrodes in a NaOH solution （0.1 mol/L）. The catalysts were prepared by cycling the graphite electrode in solutions containing Ni, Cu and Co ions at cathodic potentials. The synergistic effects and catalytic activity of the modified electrodes were investigated by cyclic voltammetry （CV）, chronoamperometry CCA） and electrochemical impedance spectroscopy （EIS）. It was found that, in the presence of methanol, the modified Ni-based ternary alloy electrode （G/NiCuCo） exhibited a significantly higher response for methanol oxidation compared to the other samples. The anodic peak currents showed a linear dependency on the square root of the scan rate, which is a characteristic of a diffusion controlled process. During CA studies, the reaction exhibited Cottrellin behavior and the diffusion coefficient of methanol was determined to be 6.25× 10-6 cm2/s and the catalytic rate constant, K, for methanol oxidation was found to be 40×107 cm3/Cmol.s）. EIS was used to investigate the catalytic oxidation of methanol on the surface of the modified electrode.展开更多
基金Zhenjiang City Key R&D Plan Modern Agriculture Project(No.SH2021017)Zhenjiang“Jinshan Talents”Project 2021Jiangsu Province“Six Talent Peak”Program(No.XCL-111)。
文摘Microbial fuel cells have already been used as biosensors to monitor assimilable organic carbon(AOC).However,their signal production from AOC is known to be completely suppressed by dissoved oxygen(DO).In this study,two identical microbial electrolysis cell(MEC)based biosensors were inoculated with marine sediment and operated at two different anodic potentials,namely-300 mV and+250 mV relative to Ag/AgCl.The MEC biosensor operated under positive anodic potential conditions had electrochemically active microbial communities on the anode,including members of the Shewanellaceae,Pseudoalteromonadaceae,and Clostridiaceae families.However,the strictly anaerobic members of the Desulfuromonadaceae,Desulfobulbaceae and Desulfobacteraceae families were found only in the negative anodic potential MEC biosensor.The positive anodic potential MEC biosensor showed several other advantages as well,such as faster start-up,significantly higher maximum current production,fivefold improvement in the AOC detection limit,and tolerance of low dissolved oxygen,compared to those obtained from the negative anodic potential MEC biosensor.The developed positive anodic potential MEC biosensor can thus be used as a real-time and inexpensive detector of AOC concentrations in high saline and low DO seawater.
基金ACKNOWLEDGMENTS The authors thank Prof. Ke-li Han for providing stereodynamics QCT code, and thank Dr. T. S. Ho and Prof. H. Rabitz for providing the potential energy surface. This work is supported by the National Natural Science Foundation of China （No.10947103）, the Foundation for Outstanding Young Scientist in Shandong Province （No.2008BS01017）, and the Young Fhnding of Jining University （No.2009QNKJ02）.
文摘The vector correlations between products and reagents for the title reactions have been calculated by the quasi-classical trajectory method at a collision energy of 21.32 kJ/mol on an accurate potential energy surface of Ho et al. （J. Chem. Phys. 119, 3063 （2003））. The peaks of the product angular distribution are found to be in both backward and forward directions for the two title reactions. The product rotational angular momentum is not only aligned, but also oriented along the negative direction of y-axis. These theoretical results are in good agreement with recent experimental findings for the two title reactions. The isotopic effect is also revealed and primarily attributed to the difference of the mass factor in the two title reactions.
文摘A simple method used for simultaneous measurement of phase retardation and optic axis of wave plate by employing 1/4 wave plate is demonstrated. The theoretical analysis of the measuring principle is presented in detail. In the measurement, after adjusting a standard 1/4 wave plate and the fast (slow) axis of the plate to be measured parallel to the pass axis of the polarizer, the plate to be measured is rotated by 450 counterclockwisly. A stepping motor is used to rotate the analyzer. The experimental data are collected by a photodetector and then sent to a computer. According to the output data curve, the phase retardation and optic axis of the plate to be measured can be obtained simultaneously. To test the feasibility of the method, a λ /2 and a λ /8 wave plates are used as examples to demonstrate the measurement procedures. The phase retardation measurement accuracy is better than 0.5×10-2. This method can be used to measure the arbitrary phase retardation conveniently.
基金Projects(61533021,61321003,61273185)supported by the National Natural Science Foundation of ChinaProject(2015CX007)supported by the Innovation-driven Plan in Central South University,ChinaProject(13JJ8003)supported by the Joint Fund of Hunan Provincial Natural Science Foundation of China
文摘Reagents are optimized for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in zinc sulfate solution, which contains an extremely large excess of Zn^(2+). First, the reagents and their doses for the experiment are selected according to the characteristics of the zinc sulfate solution. Then, the reagent doses are optimized by analyzing the influence of reagent dose on the polarographic parameters(i.e. half-wave potential E_(1/2) and limiting diffusion current I_p). Finally, the optimization results are verified by simultaneously determining trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+). The determination results indicate that the optimized reagents exhibit wide linearity, low detection limits, high accuracy and good precision for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+).
基金provided by K.N.Toosi University of Technology Research Council to conduct this research
文摘The electrocatalytic oxidation of methanol was studied over Ni, Co and Cu binary or ternary alloys on graphite electrodes in a NaOH solution （0.1 mol/L）. The catalysts were prepared by cycling the graphite electrode in solutions containing Ni, Cu and Co ions at cathodic potentials. The synergistic effects and catalytic activity of the modified electrodes were investigated by cyclic voltammetry （CV）, chronoamperometry CCA） and electrochemical impedance spectroscopy （EIS）. It was found that, in the presence of methanol, the modified Ni-based ternary alloy electrode （G/NiCuCo） exhibited a significantly higher response for methanol oxidation compared to the other samples. The anodic peak currents showed a linear dependency on the square root of the scan rate, which is a characteristic of a diffusion controlled process. During CA studies, the reaction exhibited Cottrellin behavior and the diffusion coefficient of methanol was determined to be 6.25× 10-6 cm2/s and the catalytic rate constant, K, for methanol oxidation was found to be 40×107 cm3/Cmol.s）. EIS was used to investigate the catalytic oxidation of methanol on the surface of the modified electrode.
