The flow field of gas and liquid in a φ150mm rotating-stream-tray (RST) scrubber is simulated by using computational fluid dynamic (CFD) method. The sismulation is based on the two-equation RNG κ-ε turbulence model...The flow field of gas and liquid in a φ150mm rotating-stream-tray (RST) scrubber is simulated by using computational fluid dynamic (CFD) method. The sismulation is based on the two-equation RNG κ-ε turbulence model, Eulerian multiphase model, and a real-shape 3D model with a huge number of meshes. The simulation results include detailed information about velocity, pressure, volume fraction and so on. Some features of the flow field are obtained: liquid is atomized in a thin annular zone; a high velocity air zone prevents water drops at the bottom from flying towards the wall; the pressure varies sharply at the end of blades and so on. The results will be helpful for structure optimization and engineering design.展开更多
Two different kinds of experimental techniques were used to in-situ study the austenite formation during intercritical annealing in C-Mn dual phase steel. The microstructure evolution was observed by confocal laser sc...Two different kinds of experimental techniques were used to in-situ study the austenite formation during intercritical annealing in C-Mn dual phase steel. The microstructure evolution was observed by confocal laser scanning microscope, and the austenite isothermal and non-isothermal transformation kinetics were studied by dilatometry. The results indicate that banded structure is produced for the reason of composition segregation and the competition between recrystallization and phase transformation. Austenite prefers to nucleate not only at ferrite/ferrite grain boundaries, but also inside the grains of ferrite.Furthermore, the austenitizing process is accomplished mainly via migration of the existing austenite/ferrite interface rather than nucleation of new grains. The incubation process can be divided into two stages which are controlled by carbon and manganese diffusion, respectively. During the incubation process, the nucleation rate of austenite decreases, and austenite growth changes from two-dimensional to one-dimensional. The partitioning coefficient, defined as the ratio of manganese content in the austenite to that in the adjacent ferrite, increases with increasing soaking time.展开更多
It is a multi-phase-catalyzed reaction to produce calcium phenylpyruvate by double carbonylation of benzylchloride. Based on the analysis of the reaction mechanism, a kinetic model of the carbonylation reaction was o...It is a multi-phase-catalyzed reaction to produce calcium phenylpyruvate by double carbonylation of benzylchloride. Based on the analysis of the reaction mechanism, a kinetic model of the carbonylation reaction was obtained. The model was verified through experiments in which the diffusion effect was neglected with the appropriate operation manner. But it is inevitable that the carbonylation process is controlled by diffusion as the autoclave scaling up.展开更多
Based on results obtained from the study for MHD （magneto-hydrodynamics） of advective accretion disk, which are applied to real source showing typical values for CBS （close binary star-system）, it will investigate...Based on results obtained from the study for MHD （magneto-hydrodynamics） of advective accretion disk, which are applied to real source showing typical values for CBS （close binary star-system）, it will investigate on self-structuring in the disk under the impact of the distribution of leading parameters （density, velocity ...）. The paper is considering the problem of development of the corona and will analyze the process of interaction of the plasma with the magnetic field in connection to support for the instabilities.展开更多
The main aim of this work is to study numerically the influence of an external magnetic field on the solidification processes of two-component materials. Based on the continuum model of two-phase flow a mathematical m...The main aim of this work is to study numerically the influence of an external magnetic field on the solidification processes of two-component materials. Based on the continuum model of two-phase flow a mathematical model for the directional solidification of a binary alloy in a magnetic field is presented. The model includes mass, momentum, energy and species mass conservation equations written in compressible form and additional relationships describing the temperature-solute coupling. The geometry under study is a cylindrical mold with adiabatic walls and cooled bottom. The macroscale transport in the solidification of alloys is governed by the progress of the two-phase mushy zone, which is treated by means of a porous medium approach. The volume fraction of liquid and solid phases, respectively, is calculated from a 2D approximation of the phase diagram. The results of calculation are compared with experimental data.展开更多
The axiomatization of physical theories is a fundamental issue of science. The first-order axiomatic system SpecR el for special relativity proposed recently by Andr′eka et al. is not enough to explain all the main r...The axiomatization of physical theories is a fundamental issue of science. The first-order axiomatic system SpecR el for special relativity proposed recently by Andr′eka et al. is not enough to explain all the main results in the theory, including the twin paradox and energy-mass relation. In this paper, from a four-dimensional spacetime perspective, we introduce the concepts of world-line, proper time and four-momentum to our axiomatic system SpecR el^+. Then we introduce an axiom of mass(Ax Mass) and take four-momentum conservation as an axiom(Ax CFM)in SpecR el^+. It turns out that the twin paradox and energy-mass relation can be derived from SpecR el+logically. Hence,as an extension of SpecR el, SpecR el^+is a suitable first-order axiomatic system to describe the kinematics and dynamics of special relativity.展开更多
基金Supported by the National 863 Project (2001AA642030-1) and Zhejiang Provincial Key Research Project (010007037).
文摘The flow field of gas and liquid in a φ150mm rotating-stream-tray (RST) scrubber is simulated by using computational fluid dynamic (CFD) method. The sismulation is based on the two-equation RNG κ-ε turbulence model, Eulerian multiphase model, and a real-shape 3D model with a huge number of meshes. The simulation results include detailed information about velocity, pressure, volume fraction and so on. Some features of the flow field are obtained: liquid is atomized in a thin annular zone; a high velocity air zone prevents water drops at the bottom from flying towards the wall; the pressure varies sharply at the end of blades and so on. The results will be helpful for structure optimization and engineering design.
基金Project(2013AA031601)supported by the National High Technology Research and Development Program of ChinaProject(2012BAF04B01)supported by the National Science and Technology Pillar Program During the 12th Five-year Plan Period of China
文摘Two different kinds of experimental techniques were used to in-situ study the austenite formation during intercritical annealing in C-Mn dual phase steel. The microstructure evolution was observed by confocal laser scanning microscope, and the austenite isothermal and non-isothermal transformation kinetics were studied by dilatometry. The results indicate that banded structure is produced for the reason of composition segregation and the competition between recrystallization and phase transformation. Austenite prefers to nucleate not only at ferrite/ferrite grain boundaries, but also inside the grains of ferrite.Furthermore, the austenitizing process is accomplished mainly via migration of the existing austenite/ferrite interface rather than nucleation of new grains. The incubation process can be divided into two stages which are controlled by carbon and manganese diffusion, respectively. During the incubation process, the nucleation rate of austenite decreases, and austenite growth changes from two-dimensional to one-dimensional. The partitioning coefficient, defined as the ratio of manganese content in the austenite to that in the adjacent ferrite, increases with increasing soaking time.
文摘It is a multi-phase-catalyzed reaction to produce calcium phenylpyruvate by double carbonylation of benzylchloride. Based on the analysis of the reaction mechanism, a kinetic model of the carbonylation reaction was obtained. The model was verified through experiments in which the diffusion effect was neglected with the appropriate operation manner. But it is inevitable that the carbonylation process is controlled by diffusion as the autoclave scaling up.
文摘Based on results obtained from the study for MHD （magneto-hydrodynamics） of advective accretion disk, which are applied to real source showing typical values for CBS （close binary star-system）, it will investigate on self-structuring in the disk under the impact of the distribution of leading parameters （density, velocity ...）. The paper is considering the problem of development of the corona and will analyze the process of interaction of the plasma with the magnetic field in connection to support for the instabilities.
文摘The main aim of this work is to study numerically the influence of an external magnetic field on the solidification processes of two-component materials. Based on the continuum model of two-phase flow a mathematical model for the directional solidification of a binary alloy in a magnetic field is presented. The model includes mass, momentum, energy and species mass conservation equations written in compressible form and additional relationships describing the temperature-solute coupling. The geometry under study is a cylindrical mold with adiabatic walls and cooled bottom. The macroscale transport in the solidification of alloys is governed by the progress of the two-phase mushy zone, which is treated by means of a porous medium approach. The volume fraction of liquid and solid phases, respectively, is calculated from a 2D approximation of the phase diagram. The results of calculation are compared with experimental data.
基金Supported by the National Science Foundation of China under Grant Nos.11235003 and 11475023National Social Sciences Foundation of China under Grant No.14BZX078+1 种基金the Research Fund for the Doctoral Program of Higher Education of Chinathe Undergraduate Training Program of Beijing
文摘The axiomatization of physical theories is a fundamental issue of science. The first-order axiomatic system SpecR el for special relativity proposed recently by Andr′eka et al. is not enough to explain all the main results in the theory, including the twin paradox and energy-mass relation. In this paper, from a four-dimensional spacetime perspective, we introduce the concepts of world-line, proper time and four-momentum to our axiomatic system SpecR el^+. Then we introduce an axiom of mass(Ax Mass) and take four-momentum conservation as an axiom(Ax CFM)in SpecR el^+. It turns out that the twin paradox and energy-mass relation can be derived from SpecR el+logically. Hence,as an extension of SpecR el, SpecR el^+is a suitable first-order axiomatic system to describe the kinematics and dynamics of special relativity.
