Quantitative measurement of the cutter blade sharpness is yet a difficult problem, since so far there has been no appropriate testing method. In this paper, a technique is introduced for measuring the cutter blade sha...Quantitative measurement of the cutter blade sharpness is yet a difficult problem, since so far there has been no appropriate testing method. In this paper, a technique is introduced for measuring the cutter blade sharpness at different testing conditions. The sharpness of cutter blades are measured by detecting the force to cut off the fiber with a material strength testing machine, and the results indicated that the technique could be used to measure the cutter blade sharpness satisfactorily. The fiber tension and downward speed of cutter blades are recommended to be 4.9 cN and 50 mm/min respectively for cutting 0.22 mm PET fiber.展开更多
Aimed at the difficulty in revealing the vibration localization mechanism of mistuned bladed disks by using simple non-linear model,a mechanical model of the bladed disk with random mistuning of hysteretic dry frictio...Aimed at the difficulty in revealing the vibration localization mechanism of mistuned bladed disks by using simple non-linear model,a mechanical model of the bladed disk with random mistuning of hysteretic dry friction damping was established.Then,the incremental harmonic balance method was used to analyze the effects of the parameters of bladed disks,such as the mistuning strength of dry friction force,coupled strength,viscous damping ratio and friction strength,on the forced response of the bladed disks.The results show that the vibrational energy localization phenomenon turns up in the tuned bladed disks if the nonlinear friction damping exists,and the random mistuning of the dry friction force intensifies this kind of vibration localization.展开更多
A new laboratory evaluation method for the coating blade was developed, and the tribological properties of coating blades with different Ti-based coatings were studied by UMT-2 tribometer. Comparison between the areas...A new laboratory evaluation method for the coating blade was developed, and the tribological properties of coating blades with different Ti-based coatings were studied by UMT-2 tribometer. Comparison between the areas of scratches before and after the cutting experiment was used to evaluate the cutting performance of the blades. Results showed that friction coefficient of TiA1CrN/TiA1N coating was significantly lower than that of TiA1SiN coating. Analysis of the worn surface revealed that the TiA1SiN and TiAICrN/TiA1N coatings in the dry turning process exhibited sign of inhornogeneous adhesive wear and abrasive wear. TiA1CrN/TiA1N coating has a longer working life and better anti-wear property because of its duplex coating.展开更多
文摘Quantitative measurement of the cutter blade sharpness is yet a difficult problem, since so far there has been no appropriate testing method. In this paper, a technique is introduced for measuring the cutter blade sharpness at different testing conditions. The sharpness of cutter blades are measured by detecting the force to cut off the fiber with a material strength testing machine, and the results indicated that the technique could be used to measure the cutter blade sharpness satisfactorily. The fiber tension and downward speed of cutter blades are recommended to be 4.9 cN and 50 mm/min respectively for cutting 0.22 mm PET fiber.
基金Project(2007CB707706) supported by the National Basic Research Program of China
文摘Aimed at the difficulty in revealing the vibration localization mechanism of mistuned bladed disks by using simple non-linear model,a mechanical model of the bladed disk with random mistuning of hysteretic dry friction damping was established.Then,the incremental harmonic balance method was used to analyze the effects of the parameters of bladed disks,such as the mistuning strength of dry friction force,coupled strength,viscous damping ratio and friction strength,on the forced response of the bladed disks.The results show that the vibrational energy localization phenomenon turns up in the tuned bladed disks if the nonlinear friction damping exists,and the random mistuning of the dry friction force intensifies this kind of vibration localization.
基金supported by the National Natural Science Foundation of China(Grant No.51075308)
文摘A new laboratory evaluation method for the coating blade was developed, and the tribological properties of coating blades with different Ti-based coatings were studied by UMT-2 tribometer. Comparison between the areas of scratches before and after the cutting experiment was used to evaluate the cutting performance of the blades. Results showed that friction coefficient of TiA1CrN/TiA1N coating was significantly lower than that of TiA1SiN coating. Analysis of the worn surface revealed that the TiA1SiN and TiAICrN/TiA1N coatings in the dry turning process exhibited sign of inhornogeneous adhesive wear and abrasive wear. TiA1CrN/TiA1N coating has a longer working life and better anti-wear property because of its duplex coating.
