期刊文献+
共找到15篇文章
< 1 >
每页显示 20 50 100
RH精炼钢中全氧量变化与操作改进 被引量:2
1
作者 区铁 朱万军 +2 位作者 田义胜 孙伟 林利平 《北京科技大学学报》 EI CAS CSCD 北大核心 2009年第S1期72-75,共4页
为了使钢中全氧量控制在一个适当的水平,在武钢炼钢总厂RH真空脱气装置对低碳、超低碳钢进行了脱氧净化试验.结果表明,影响全氧去除的因素按作用高低依次是出钢溶解氧水平,溶解氧与钢包渣的交互作用,钢包渣,和真空处理净化时间.通过改... 为了使钢中全氧量控制在一个适当的水平,在武钢炼钢总厂RH真空脱气装置对低碳、超低碳钢进行了脱氧净化试验.结果表明,影响全氧去除的因素按作用高低依次是出钢溶解氧水平,溶解氧与钢包渣的交互作用,钢包渣,和真空处理净化时间.通过改进工艺生产了全氧量≤10×10-6,非金属夹杂物尺寸<10μm的清洁钢水,建立了一个钢包内钢水全氧浓度随时间变化的新方程,该方程考虑了全氧的表观平衡含量及环流、扩散传质对去除氧化物夹杂速率的影响. 展开更多
关键词 二次精炼 RH真空脱气 低碳洁净钢 全氧量 夹杂物控制
原文传递
板坯连铸机全保护浇注工艺优化 被引量:15
2
作者 常朋飞 俞学成 +2 位作者 孙亮 赵晓东 柴光伟 《河北冶金》 2021年第12期51-56,共6页
结合迁钢连铸生产情况,优化并完善了连铸机全保护浇注工艺,通过开浇前置换中间包空气、增加长水口氩气稳压计、优化中间包全保护工艺和结晶器流场优等措施,降低了钢水发生二次氧化的概率,钢中全氧含量明显减小,氮含量整体降低了10 ppm,... 结合迁钢连铸生产情况,优化并完善了连铸机全保护浇注工艺,通过开浇前置换中间包空气、增加长水口氩气稳压计、优化中间包全保护工艺和结晶器流场优等措施,降低了钢水发生二次氧化的概率,钢中全氧含量明显减小,氮含量整体降低了10 ppm,夹杂物数量降低了4.1个/mm^(2),铸坯质量得到明显提升。 展开更多
关键词 连铸 保护浇注 长水口 结晶器流场 夹杂物 全氧量 氮含量
在线阅读 下载PDF
梅山2号板坯连铸低碳钢铸坯质量研究 被引量:9
3
作者 罗高强 唐萍 +2 位作者 文光华 陈志平 倪修华 《钢铁》 CAS CSCD 北大核心 2007年第8期36-40,共5页
对梅钢2号板坯连铸机低碳钢浇铸的质量问题进行了调研,并采用低倍、硫印、显微金相分析、扫描电镜、能谱及全氧量分析等多种手段,研究了不同浇铸条件下铸坯质量缺陷与工艺条件的关系。研究结果表明非稳态铸坯质量明显低于稳态铸坯质量... 对梅钢2号板坯连铸机低碳钢浇铸的质量问题进行了调研,并采用低倍、硫印、显微金相分析、扫描电镜、能谱及全氧量分析等多种手段,研究了不同浇铸条件下铸坯质量缺陷与工艺条件的关系。研究结果表明非稳态铸坯质量明显低于稳态铸坯质量。同时,未观察到由结晶器卷渣形成的大型夹杂,铸坯的缺陷主要为气孔、Al2O3及复合铝酸盐夹杂。全氧分析表明,铸坯w(T[O])平均为20.86×10-6,且最大值不超过27.00×10-6,相同工艺条件下,该板坯质量处于较高水平。 展开更多
关键词 低碳钢 板坯质量 缺陷 全氧量
在线阅读 下载PDF
连铸钢水保护浇注工艺分析 被引量:8
4
作者 杨宪礼 韩永德 李颖 《包头钢铁学院学报》 2001年第4期384-386,共3页
介绍了 3种不同的连铸浇注形式 ,分析了在 3种形式下 ,钢水的二次氧化和全氧量的变化 。
关键词 保护浇注 二次氧化 全氧量 连铸 炼钢
在线阅读 下载PDF
连铸钢水保护浇注工艺分析 被引量:1
5
作者 楚志宝 陈树国 刁承民 《黑龙江冶金》 1999年第3期25-27,共3页
本文介绍了三种不同的连铸浇注形式,分析了在三种形式下,钢水的二次氧化和全氧量的变化,并阐述了不同形式的浇注工艺的应用效果。
关键词 保护浇注 中间包渣 连铸钢水 钢水二次氧化 全氧量 保护套管 结晶器用 工艺分析 钢包 浇注工艺
在线阅读 下载PDF
高碳钢钢包精炼炉造白渣工艺研究 被引量:2
6
作者 孙国敏 李志伟 +2 位作者 杨锁兵 刘万善 胡冬东 《江西冶金》 2023年第2期142-146,共5页
为提高高碳钢水的纯净度,对钢包精炼炉(LF炉)精炼造白渣工艺进行优化。在LF精炼造渣过程中加入铝粉压球脱氧,研究渣的还原性、碱度(R)、钙铝比、成分及铝粉压球用量对钢水全氧量(w(T.O))的影响。结果表明,当渣中w(CaO)=52%~58%、w(Al_(2... 为提高高碳钢水的纯净度,对钢包精炼炉(LF炉)精炼造白渣工艺进行优化。在LF精炼造渣过程中加入铝粉压球脱氧,研究渣的还原性、碱度(R)、钙铝比、成分及铝粉压球用量对钢水全氧量(w(T.O))的影响。结果表明,当渣中w(CaO)=52%~58%、w(Al_(2)O_(3))=28%~33%、w(SiO_(2))=8%~12%、w(TFe+MnO)<1.56%、R=4.6~5.3、钙铝比为1.60~1.77时,可有效降低钢水中的全氧量。与工艺优化前相比,精炼结束后钢水全氧量低于10^(-5)的炉数占比由27%提高至81%,平均全氧量由1.4×10^(-5)降至9.5×10^(-6);优化后的钢水平均回硅量由0.044%提高至0.095%。钢水成分控制时应考虑回硅量,以避免硅含量超标。 展开更多
关键词 高碳钢 钢包精炼炉 白渣 全氧量
在线阅读 下载PDF
高氮钢电渣重熔夹杂物控制研究 被引量:1
7
作者 汤旭炜 朱荣 《工业加热》 CAS 2015年第1期48-51,共4页
对高氮钢电渣重熔前后夹杂物进行对比研究,分析不同渣系和自耗电极氧含量对重熔后夹杂物的影响。研究发现,不同渣系对电渣钢的洁净度影响很大,适当提高w(Ca O)/w(Al2O3)可有效降低电渣锭中的夹杂物和全氧量。对高氮钢电渣重熔的脱硫进... 对高氮钢电渣重熔前后夹杂物进行对比研究,分析不同渣系和自耗电极氧含量对重熔后夹杂物的影响。研究发现,不同渣系对电渣钢的洁净度影响很大,适当提高w(Ca O)/w(Al2O3)可有效降低电渣锭中的夹杂物和全氧量。对高氮钢电渣重熔的脱硫进行研究,分析了不同渣系和熔炼速率对高氮钢脱硫率的影响,实验结果表明:电渣重熔后,硫化物夹杂的平均直径和单位面积数量大大减少,夹杂物的主要类型为Mn S+Al2O3复合型夹杂物,同时适度提高渣中Ca O含量实现提高硫分配比是提高脱硫效率的有效手段。脱硫动力学推导中发现重熔速率越低,脱硫效果越明显,但实验发现脱硫率随重熔速率的降低呈现先降低后升高的趋势,其原因在于渣池中发生硫化物富集,导致"回硫"现象发生。 展开更多
关键词 夹杂物 电渣重熔 渣系 全氧量 洁净度
在线阅读 下载PDF
薄板坯连铸保护浇注工艺研究 被引量:16
8
作者 石树东 胡显堂 +1 位作者 张虎成 石鑫越 《河北冶金》 2021年第9期39-43,共5页
钢水在浇注过程中如果保护措施不到位,空气很容易进入钢水并导致其氧含量和氮含量增加,从而恶化钢水质量。通过研究首钢京唐公司MCCR产线连铸保护浇注工艺,分析了钢包自开率、钢包下渣检测系统、钢包长水口+中间包保护浇注等因素对保护... 钢水在浇注过程中如果保护措施不到位,空气很容易进入钢水并导致其氧含量和氮含量增加,从而恶化钢水质量。通过研究首钢京唐公司MCCR产线连铸保护浇注工艺,分析了钢包自开率、钢包下渣检测系统、钢包长水口+中间包保护浇注等因素对保护浇注的影响,并提出了相应的保护浇注措施。实施后,中间包铝损和铝比合格率不断上升,铸机保护浇注效果良好。 展开更多
关键词 连铸 保护浇注 钢包自开率 全氧量 洁净度 铝损 铝比
在线阅读 下载PDF
HPB235钢轧材翘皮的原因分析及改进措施 被引量:2
9
作者 杨怀春 《新疆钢铁》 2012年第2期40-42,共3页
针对HPB235钢在轧制过程中产生翘皮缺陷,从炼钢角度采取多因素分析方法,对影响普碳钢翘皮缺陷产生的各种因素进行了分析,结果表明钢水全氧量及夹杂物量对翘皮缺陷的发生率有较大影响。炼钢系统通过优化转炉-精炼-连铸工艺操作,有效降低... 针对HPB235钢在轧制过程中产生翘皮缺陷,从炼钢角度采取多因素分析方法,对影响普碳钢翘皮缺陷产生的各种因素进行了分析,结果表明钢水全氧量及夹杂物量对翘皮缺陷的发生率有较大影响。炼钢系统通过优化转炉-精炼-连铸工艺操作,有效降低了高速线材因脱氧产物及夹杂物而导致翘皮缺陷的高发生率。 展开更多
关键词 翘皮 全氧量 夹杂物
在线阅读 下载PDF
Biological Nutrient Removal in a Full Scale Anoxic/Anaerobic/Aerobic/ Pre-anoxic-MBR Plant for Low C/N Ratio Municipal Wastewater Treatment 被引量:8
10
作者 胡香 谢丽 +2 位作者 SHIM Hojae 张善发 杨殿海 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2014年第4期447-454,共8页
A novel full scale modified A2O (anoxic/anaerobic/aerobic/pre-anoxic)-membrane bioreactor (MBR) plant combined with the step feed strategy was operated to improve the biological nutrient removal (BNR) from low C... A novel full scale modified A2O (anoxic/anaerobic/aerobic/pre-anoxic)-membrane bioreactor (MBR) plant combined with the step feed strategy was operated to improve the biological nutrient removal (BNR) from low C/N ratio municipal wastewater in Southern China. Transformation of organic carbon, nitrogen and phosphorus, and membrane fouling were investigated. Experimental results for over four months demonstrated good efficiencies for chemical oxygen demand (COD) and NH4^+-N removal, with average values higher than 84.5%and 98.1%, re-spectively. A relatively higher total nitrogen (TN) removal efficiency (52.1%) was also obtained at low C/N ratio of 3.82, contributed by the configuration modification (anoxic zone before anaerobic zone) and the step feed with a distribution ratio of 1:1. Addition of sodium acetate into the anoxic zone as the external carbon source, with a theoretical amount of 31.3 mg COD per liter in influent, enhanced denitrification and the TN removal efficiency in-creased to 74.9%. Moreover, the total phosphate (TP) removal efficiency increased by 18.0%. It is suggested that the external carbon source is needed to improve the BNR performance in treating low C/N ratio municipal waste-water in the modified A^2O-MBR process. 展开更多
关键词 biological nutrient removal low C/N ratio wastewater membrane bioreactor DENITRIFICATION external carbon source
在线阅读 下载PDF
Yield Attributes and Oil Safety in the Hyperaccumulator Canola Plant Grown in a Bioremediated Sewaged Soil
11
作者 Hussein Fawzy Abouziena Mohamed Saber +2 位作者 Essam Hoballah Soad El-Ashry Alaa Mohamed Zaghloul 《Journal of Agricultural Science and Technology(A)》 2013年第12期1010-1016,共7页
A field experiment was carried out at Abu-Rawash sewage farm to appraise the effect of certain novel remediative amendments on the quality of oil as well as the vegetative parameters and yield criteria of canola plant... A field experiment was carried out at Abu-Rawash sewage farm to appraise the effect of certain novel remediative amendments on the quality of oil as well as the vegetative parameters and yield criteria of canola plant used as hyperaccumulator for the remediation of sewaged soils. The treatments included fallow soil (irrigated without growing canola), soil cultivated with canola (Brassica napus L.) and inoculated with arbuscular mycorrhiza (AM), soil inoculation with Thiobacillus sp. (a mixture of Thiobacillus ferrooxidans and Thiobacillus thiooxidant), soil treated with a mixture of 250 mg bentonite plus 250 mg rock phosphate/kg soil and inoculated with phosphate dissolving bacteria (PDB), and soil treated with all the aforementioned remediative amendments. Results indicated that the vegetative parameters and yield criteria of canola plant did not exhibit any serious adverse impact under all treatments applied. The concentrations of Zn and Cu in canola oil extracted from plants grown in soil inoculated with AM and/or Thiobacillus sp. far exceeded the safe permissible levels. On the other hand, the content of both PTEs in the oil extracted from canola plants grown in soil treated with either probentonite or with mixture of all remediative amendments followed the permissible safe levels. 展开更多
关键词 CANOLA bioremediation of sewaged soil permissible levels of PTEs in canola oil PHYTOREMEDIATION Thiobacillus sp. arbuscular mycorrhiza.
在线阅读 下载PDF
Methane Dynamics in Northern Peatlands: A Review 被引量:13
12
作者 D. Y. F. LAI 《Pedosphere》 SCIE CAS CSCD 2009年第4期409-421,共13页
Northern peatlands store a large amount of carbon and play a significant role in the global carbon cycle. Owing to the presence of waterlogged and anaerobic conditions, peatlands are typically a source of methane (CH4... Northern peatlands store a large amount of carbon and play a significant role in the global carbon cycle. Owing to the presence of waterlogged and anaerobic conditions, peatlands are typically a source of methane (CH4), a very potent greenhouse gas. This paper reviews the key mechanisms of peatland CH4 production, consumption and transport and the major environmental and biotic controls on peatland CH4 emissions. The advantages and disadvantages of micrometeorological and chamber methods in measuring CH4 fluxes from northern peatlands are also discussed. The magnitude of CH4 flux varies considerably among peatland types (bogs and fens) and microtopographic locations (hummocks and hollows). Some anthropogenic activities including forestry, peat harvesting and industrial emission of sulphur dioxide can cause a reduction in CH4 release from northern peatlands. Further research should be conducted to investigate the in fluence of plant growth forms on CH4 flux from northern peatlands, determine the water table threshold at which plant production in peatlands enhances CH4 release, and quantify peatland CH4 exchange at plant community level with a higher temporal resolution using automatic chambers. 展开更多
关键词 global carbon cycle greenhouse gas methane oxidation METHANOGENESIS methanotrophy
在线阅读 下载PDF
Effect of CO Combustion Promoters on Combustion Air Partition in FCC under Nearly Complete Combustion 被引量:3
13
作者 王锐 罗雄麟 许锋 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2014年第5期531-537,共7页
With CO combustion promoters, the role of combustion air flow rate for concerns of economics and control is important. The combustion air is conceptually divided to three parts: the air consumed by coke burning,the ai... With CO combustion promoters, the role of combustion air flow rate for concerns of economics and control is important. The combustion air is conceptually divided to three parts: the air consumed by coke burning,the air consumed by CO combustion and the air unreacted. A mathematical model of a fluid catalytic cracking(FCC)unit, which includes a quantitative correlation of CO heterogeneous combustion and the amount of CO combustion promoters, is introduced to investigate the effects of promoters on the three parts of combustion air. The results show that the air consumed by coke burning is almost linear to combustion air flow rate, while the air consumed by CO combustion promoters tends to saturate as combustion air flow rate increases, indicating that higher air flow rate can only be used as a manipulated variable to control the oxygen content for an economic concern. 展开更多
关键词 fluid catalytic cracking unit CO combustion promoters combustion air partition
在线阅读 下载PDF
China's Voluntary Mitigation Target and Road of Low-carbon Development
14
作者 He Jiankun 《Chinese Journal of Population,Resources and Environment》 2011年第2期18-27,共10页
China is going through a rapid development stage of industrialization and urbanization.Although tremendous achievements have been made in the aspects of energy conservation,improvement of energy effectiveness and deve... China is going through a rapid development stage of industrialization and urbanization.Although tremendous achievements have been made in the aspects of energy conservation,improvement of energy effectiveness and development of new and renewable energies,because of the rapid development of economy,it is difficult to change the huge total amount and fast increase of CO2 emission in the near future.China has to confront the tough challenge to address global climate change.China plans to reduce carbon intensity,that is,CO2 emissions per unit GDP,by 40 to 45% by 2020 compared with the 2005 level.It is a strategic option to coordinate domestic sustainable development with coping with global climate change on the basis of China's national circumstances,representing the core content and key measures for transforming development pattern and realizing low-carbon development.To achieve the target,more capital and technology inputs are required for energy conservation and low-carbon development during the twelfth and Thirteenth Five Year Plan period than in the Eleventh Five Year Plan period.In addition,energy conservation achieved by structural adjustment,industrial upgrading and product value-added improvement is also expected to play a greater role.Therefore,China should strengthen technological innovation,make greater efforts to transform the development pattern,take advantage of the synergistic effect of policies and measures while coping with global climate change and building a domestic tow-oriented society.China should also establish an industrial system characterized by low-carbon emission.Then China will ultimately achieve a win-win situation in both domestic sustainable development and coping with global climate change. 展开更多
关键词 climate change low-carbon economy carbon inten-sity emission reduction target
在线阅读 下载PDF
电渣重熔高氮钢的洁净度研究
15
作者 汤旭炜 朱荣 李超 《炼钢》 CAS 北大核心 2014年第5期48-51,69,共5页
对高氮钢电渣重熔前后夹杂物进行对比研究,分析不同渣系和自耗电极氧含量对重熔后夹杂物的影响。研究发现,不同渣系对电渣钢的洁净度影响很大,适当提高w(CaO)/w(Al2O3)可有效降低电渣锭中的夹杂物和全氧量。不同氧含量的自耗电... 对高氮钢电渣重熔前后夹杂物进行对比研究,分析不同渣系和自耗电极氧含量对重熔后夹杂物的影响。研究发现,不同渣系对电渣钢的洁净度影响很大,适当提高w(CaO)/w(Al2O3)可有效降低电渣锭中的夹杂物和全氧量。不同氧含量的自耗电极进行重熔后,电渣锭全氧量及夹杂物种类和组成成分差别不大,夹杂物成分中w(MnO)/w(MnO+Al2O3)≈O.23~0.32,自耗电极中的氧含量与电渣重熔的洁净度没有直接关系,采用氧质量分数为(40~100)×10^-6的不同自耗电极,电渣重熔后氧质量分数始终保持在(20~30)×10^-6。 展开更多
关键词 夹杂物 渣系 全氧量 洁净度
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部