Magnesium is a promising metal used as anodes for chemical power sources. This metal could theoretically provide negative discharge potential and exhibit large capacity during the discharge process. However, when the ...Magnesium is a promising metal used as anodes for chemical power sources. This metal could theoretically provide negative discharge potential and exhibit large capacity during the discharge process. However, when the magnesium anode is adopted for practical applications, several issues, such as the discharge products adhered to the electrode surface, the self-discharge occurring on the anode material, and the detachment of metallic particles, adversely affect its inherently good discharge performance. In this work, the types of chemical power sources using magnesium as anodes were elaborated, and the approaches to enhance its anode performance were analyzed.展开更多
The effects of relative humidity (RH) on a printed circuit board finished with electroless nickel immersion gold (PCB-ENIG) under an adsorbed thin electrolyte layer (ATEL) were investigated in situ via the measurement...The effects of relative humidity (RH) on a printed circuit board finished with electroless nickel immersion gold (PCB-ENIG) under an adsorbed thin electrolyte layer (ATEL) were investigated in situ via the measurement of cathodic polarization curves, electrochemical impedance spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy to clearly elaborate the corrosion behavior of PCB-ENIG in the atmospheric environment. Results indicated that the cathodic process of PCB-ENIG under ATEL was dominated by the reduction of dissolved oxygen, corrosion products, and H2O. The cathodic current density of PCB-ENIG increased progressively with increasing RH. Moreover, its cathodic current density in the solution was greater than that under ATEL. This result demonstrated that the diffusion process was not the controlling step during the limiting reduction of cathodic oxygen. When the polarization potentials were located in a more negative region, the cathodic polarization current density gradually decreased under 75% and 85% RH. Notably, the anodic process became the controlling step in the extremely thin liquid film during the remainder of the experiment.展开更多
The special experimental device and sulfuric acid electrolyte were adopted to study the influence of anodic oxidation heat on hard anodic film for 2024 aluminum alloy. Compared with the oxidation heat transferred to t...The special experimental device and sulfuric acid electrolyte were adopted to study the influence of anodic oxidation heat on hard anodic film for 2024 aluminum alloy. Compared with the oxidation heat transferred to the electrolyte through anodic film, the heat transferred to the coolant through aluminum substrate is more beneficial to the growth of anodic film. The film forming speed, film thickness, density and hardness are significantly increased as the degree of undercooling of the coolant increases. The degree of undercooling of the coolant, which is necessary for the growth of anodic film, is related to the degree of undercooling of the electrolyte, thickness of aluminum substrate, thickness of anodic film, natural parameters of bubble covering and current density. The microstructure and performance of the oxidation film could be controlled by the temperature of the coolant.展开更多
The current distributions over carbon steel under iron red alkyd primer exposed to 3.5% sodium chloride solution were mapped using the wire beam electrode （WBE）. The electrochemical impedance spectroscopy （EIS） of...The current distributions over carbon steel under iron red alkyd primer exposed to 3.5% sodium chloride solution were mapped using the wire beam electrode （WBE）. The electrochemical impedance spectroscopy （EIS） of the WBE was carded out to analyze the performance of coating delamination and corrosion behavior of carbon steel beneath defective coating. The EIS data revealed that protective capability of coating decreased with immersion time and the degree of cathodic delamination showed a rapid rise. The current density distribution of WBE indicated that cathodic sites was located at the defect at the beginning of immersion and gradually spread into the intact coating. The cathodic regions were distinguished from the anodic area and distributed over the WBE. The changes of cathodic sites could reflect the deterioration process of defective coating. The cathodic area ratio was a more useful parameter than the cathodic delamination degree to evaluate the coating cathodic delamination. The polarity reversals of electrodes at the defect and beneath coating were observed. A simple discussion of relationship between the blister and the polarity reversal was made from a standpoint of electrochemical distribution. WBE method was able to map and record the changes of local cathodic sites beneath defective coating in real time, which could provide more detailed information about the local degradation of coating.展开更多
The effects of mercury ions on gold cyanidation were studied. The results show that under low cyanide concentration, gold cyanide process is controlled by CN- transfer, while at higher cyanide concentration, there for...The effects of mercury ions on gold cyanidation were studied. The results show that under low cyanide concentration, gold cyanide process is controlled by CN- transfer, while at higher cyanide concentration, there forms passivation on gold surface. Therefore, chemical oxidation of gold in cyanide solution of higher concentration is controlled by surface reaction. Small quantity of additions of mercury ions bring about great increases in anodic gold dissolution rate, decreases the passivation and reduces the equilibrium activated energy. In addition, they also markedly change the effect pattern of cyanide concentration. Mercury ions show positive effects on cathodic reduction of oxygen and raise the rate of electrochemical step of the cathodic reduction of oxygen. Addition of a certain amount of hydrogen peroxide is confirmed to be an effective way for intensification of cathodic process on gold electrode. Active potential range and current peak on anodic dissolution are enlarged when being co-intensified with Hg^2＋ and hydrogen peroxide. Co-intensifying effect may be obtained and gold from gold concentrates. gold leaching rate is considerably increased on cyanide leaching of展开更多
The corrosion resistance of 2024-T3 aluminum alloy was improved by anodizing treatment in a mixed electrolyte containing 10% sulfuric acid, 5% boric acid and 2% phosphoric acid. Electrochemical impedance spectroscopy ...The corrosion resistance of 2024-T3 aluminum alloy was improved by anodizing treatment in a mixed electrolyte containing 10% sulfuric acid, 5% boric acid and 2% phosphoric acid. Electrochemical impedance spectroscopy （EIS） technique was used to study the corrosion behavior of the anodized alloy. Using Tafel plot and salt spray techniques, it is revealed that the anodizing treatment of 2024-T3 aluminum alloy in sulfuric-boric-phosphoric acids provides better corrosion resistance and durability in comparison with the anodizing treatment in phosphoric acid or sulfuric-boric acids. This electrolyte can be a suitable alternative for chromate baths which are generally used in the anodizing of aluminum alloys.展开更多
Anodic processes on Cu-10 Al electrode in molten KF-AlF3-Al2O3(saturated) and suspensions were characterized using chronopotentiometric and cyclic voltammetric techniques. Effects of cryolite ratio(CR= x(KF)/x(AlF3)),...Anodic processes on Cu-10 Al electrode in molten KF-AlF3-Al2O3(saturated) and suspensions were characterized using chronopotentiometric and cyclic voltammetric techniques. Effects of cryolite ratio(CR= x(KF)/x(AlF3)), temperature and particle volume fraction(φ) on the electrochemical behaviour of the anode were demonstrated. Initially, the anode was polarised in the galvanostatic mode in melt and suspensions(φ=0.12, 0.15) at 750 ℃ with 0.4 A/cm^2 current density. The anode potential in melt varied between 2.5 and 3.2 V and in suspensions(φ= 0.12) between 3.3 and 3.4 V. XRD analysis was conducted to study the oxide phases on the anode surface. Anode limiting current densities and mass transfer coefficients drastically decreased with the increase of φ in the suspension. The results suggest that the Cu-10 Al electrode works better in suspensions with CR of 1.4 and particle volume fraction of 0.09 at 800 ℃.展开更多
One-step anodic acetoxylation of benzene to phenyl acetate was studied in acetic acid-water solution using a one-compartment electrochemical cell in galvanostatic mode. Compared to the anhydrous system, the addition o...One-step anodic acetoxylation of benzene to phenyl acetate was studied in acetic acid-water solution using a one-compartment electrochemical cell in galvanostatic mode. Compared to the anhydrous system, the addition of water improved the current efficiency for the electrosynthesis of phenyl acetate. The maximum efficiency reached 4.8% with the selectivity of 96% to phenyl acetate when the electrolysis was carried out under the optimal conditions. The investigation also indicated that the concentration of phenyl acetate increased linearly in 12 h and reached 1.07 g/L with the selectivity of 95%. Cyclic voltammetry experiments showed that the adsorption of benzene at Pt anode enhanced by the addition of water was critical to the formation of phenyl acetate. An activated benzene mechanism was proposed for the anodic acytoxylation, and the analysis of gas products demonstrated that Kolbe reaction was the main side reaction.展开更多
Reagents are optimized for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in zinc sulfate solution, which contains an extremely large excess of Zn^(2+). First, the reagents and their d...Reagents are optimized for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in zinc sulfate solution, which contains an extremely large excess of Zn^(2+). First, the reagents and their doses for the experiment are selected according to the characteristics of the zinc sulfate solution. Then, the reagent doses are optimized by analyzing the influence of reagent dose on the polarographic parameters(i.e. half-wave potential E_(1/2) and limiting diffusion current I_p). Finally, the optimization results are verified by simultaneously determining trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+). The determination results indicate that the optimized reagents exhibit wide linearity, low detection limits, high accuracy and good precision for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+).展开更多
Objective The correlation between various formative conditions and the pore characterizationsof the anodic alumina membrane is investigated to seek the optimal conditions for the formation of anodic aluminamembrane. M...Objective The correlation between various formative conditions and the pore characterizationsof the anodic alumina membrane is investigated to seek the optimal conditions for the formation of anodic aluminamembrane. Methods High purity aluminum foils are used as the starting materials. The anodization is conduc-ted in three types of electrolytes, 3% sulfuric acid, 5% sulfuric acid and 2. 7% oxalic acid, respectively, with dif-ferent voltages at for 48h. The characterizations of the pore size, the effective porosity and the pore porosity areobserved and determined by scanning electron microscopy. The hydraulic conductances of the membranes are meas-ured to confirm that the pores are open and evaluate the permselectivity of the membranes. Results The experi-mental result shows that the ordered pore arrays are obtained for oxidation under our experimental conditions. Withthe increasing of the voltage, the pore size and pore porosity increased significantly (P <0.05) , while the effectiveporosity decreased significantly (P <0.05) with the same electrolyte. The pore size formed in 3% sulfuric acid or5% sulfuric acid is much smaller than in 2. 7% oxalic acid as an electrolyte. The hydraulic conductance of anodicalumina membrane that formed under our experimental condition is higher than those of the membranes are availablecurrently used in clinical. Conclusion The results suggest that the optimal conditions for the formation of anodicalumina membrane that used in hemodialysis are in 3% or 5% sulfuric acid with 12. 5V to 17. 5V at for 48h.展开更多
An attempt was made to build up a thick and compact oxide layer rapidly by pre-treating the Pb-Ag-Nd anode in fluoride-containing H2SO4 solution. The passivation reaction of Pb-Ag-Nd anode during pre-treatment process...An attempt was made to build up a thick and compact oxide layer rapidly by pre-treating the Pb-Ag-Nd anode in fluoride-containing H2SO4 solution. The passivation reaction of Pb-Ag-Nd anode during pre-treatment process was investigated using cyclic voltammetry, linear scanning voltammetry, environmental scanning electron microscopy and X-ray diffraction analysis. The results show that Pb F2 and PbSO4 are formed near the potential of Pb/PbSO4 couple. The pre-treatment in fluoride-containing H2SO4 solution contributes to the formation of a thick, compact and adherent passive film. Furthermore, pre-treatment in fluoride-containing H2SO4 solution also facilitates the formation of PbO2 on the anodic layer, and the reason could be attributed to the formation of more PbF2 and PbSO4 during the pre-treatment which tend to transform to PbO2 during the following electrowinning process. In addition, the anodic layer on anode with pre-treatment in fluoride-containing H2SO4 solution is thick and compact, and its predominant composition is β-PbO2. In summary, the pre-treatment in fluoride-containing H2SO4 solution benefits the formation of a desirable protective layer in a short time.展开更多
Ionic liquids have negligibly low vapor pressure, high stability and polarity. They are regarded as green solvents. Enzymes, especially lipases, as well as whole-cell of microbe, are catalytically active in ionic liqu...Ionic liquids have negligibly low vapor pressure, high stability and polarity. They are regarded as green solvents. Enzymes, especially lipases, as well as whole-cell of microbe, are catalytically active in ionic liquids or aqueous-ionic liquid biphasic systems. Up to date, there have been many reports on enzyme-exhibited features and enzyme-mediated reactions in ionic liquids. In many cases, remarkable results with respect to yield, catalytic activity, stability and (enantio-, regio-) selectivity were obtained in ionic liquids in comparison with those observed in conventional media. Accordingly, ionic liquids provide new possibilities for the application of new type of solvent in biocatalytic reactions.展开更多
An investigation was performed on the suitability of carbon materials, metallic lead and its alloys as substrates for zinc negative electrode in acid PbO2-Zn single flow batteries. The zinc deposition process was carr...An investigation was performed on the suitability of carbon materials, metallic lead and its alloys as substrates for zinc negative electrode in acid PbO2-Zn single flow batteries. The zinc deposition process was carried out in the mediumofl mol.L 1H2SO4 at room temperature. No maximum current appears on the potentiostatic current transients for the zinc deposition on lead and its alloys. With increasing overpotential, the progressive nucleation turns to be a 3D-instantaneous nucleation process for the resin-graphite composite. Hydrogen evolution on the graphite composite is effectively suppressed with the doping of a polymer resin. The hydrogen evolution reaction on the lead is relatively weak, while on the lead alloys, it becomes serious to a certain degree. Although the ex- change current density of zinc deposition and dissolution process on the graphite composite is relatively low, the zinc corrosion is weakened to a great extent. With the increase of deposition time, zinc deposits are more compact. The cyclings of zinc galvanostatic charge-discharge on the graphite composite provide more than 90% of coulombic and 80% of energy efficiencies, and exhibit superior cycling stability during the first 10 cycles.展开更多
The investigation of electrodeposition of rhenium in alkaline and acidic electrolytes was carried out, polarization curves were obtained by electrochemically and cyclically potentiodynamic methods. By the investigatio...The investigation of electrodeposition of rhenium in alkaline and acidic electrolytes was carried out, polarization curves were obtained by electrochemically and cyclically potentiodynamic methods. By the investigation of rhenium concentration, sulphuric acid, alkali, ammonium sulphate, temperature and acidity of solution, it was found that reaming velocity was an optimal regime and electrolyte composition for an obtaining of high quality rhenium deposits from an alkaline electrolyte and acidic electrolyte. It was defined that the process of electrodeposition of rhenium in alkaline electrolyte is accompanied by chemical polarization and the electrodeposition of rhenium in acidic electrolyte goes gradually with the formation of intermediate films of sediments,展开更多
The electrochemical reduction of CO2 on a Pb electrode was investigated in 0. 1 mol/L KOH/methanol electrolyte at different temperatures and pressures. A graphite electrode was employed as the counter electrode, and a...The electrochemical reduction of CO2 on a Pb electrode was investigated in 0. 1 mol/L KOH/methanol electrolyte at different temperatures and pressures. A graphite electrode was employed as the counter electrode, and an AglAgCl （sat. KCl） electrode was used as the reference electrode. The Tafel plots of the products by the electrochemical reduction of CO2 showed that the formation process of HCOOH differed from that of CO and the reduction of CO2was not limited by the diffusion of CO2 in the investigated potential range. Kinetic analysis indicated that the reaction orders were 0. 573 for electrochemical reduction of CO2 to CO and 0. 671 for CO2 to HCOOH in the cathodic direction.展开更多
DCMSL （depolarization components of molecular scattering of light） have been studied within the wide spectral range （0-200 cm-1） and in the temperature intervals （20-200 ℃） in toluol （C6HsCH3） and aniline （C...DCMSL （depolarization components of molecular scattering of light） have been studied within the wide spectral range （0-200 cm-1） and in the temperature intervals （20-200 ℃） in toluol （C6HsCH3） and aniline （C6HsNH2）. It has been shown that when a liquid is heated and temperatures approach to critical ones, a significant contribution of DCMSL is made by vibration motion of molecules. The special properties of the temperature-frequency behavior of DCMSL spectra are discussed from the view point of hindered rotation of liquid molecules with consideration of intermolecular interaction.展开更多
A new method of preparing thin film metal-hydride electrodes for metal-hydride batteries is described. The method consists of simultaneous deposition of multi-component metallic species onto a substrate while bombardi...A new method of preparing thin film metal-hydride electrodes for metal-hydride batteries is described. The method consists of simultaneous deposition of multi-component metallic species onto a substrate while bombarding the growing, deposited thin film electrode with a low energy hydrogen ion beam An amorphous LaNi4 hydride thin film electrode has been prepared by this Hydrogen Ion Beam Assisted Deposition （HIBAD） technique. The electrochemical discharge capacity and cycle life of this electrode in a 6 M KOH solution surpass previously reported values for La-Ni thin film electrodes prepared by other deposition methods.展开更多
基金Project supported by the Postdoctoral Science Foundation of Central South UniversityProject(2014M552151)supported by the China Postdoctoral Science FoundationProject(51101171)supported by the National Natural Science Foundation of China
文摘Magnesium is a promising metal used as anodes for chemical power sources. This metal could theoretically provide negative discharge potential and exhibit large capacity during the discharge process. However, when the magnesium anode is adopted for practical applications, several issues, such as the discharge products adhered to the electrode surface, the self-discharge occurring on the anode material, and the detachment of metallic particles, adversely affect its inherently good discharge performance. In this work, the types of chemical power sources using magnesium as anodes were elaborated, and the approaches to enhance its anode performance were analyzed.
基金Project(51271032)supported by the National Natural Science Foundation of ChinaProject(2014CB643300)supported by the National Basic Research Program of ChinaProject supported by the National Environmental Corrosion Platform,China
文摘The effects of relative humidity (RH) on a printed circuit board finished with electroless nickel immersion gold (PCB-ENIG) under an adsorbed thin electrolyte layer (ATEL) were investigated in situ via the measurement of cathodic polarization curves, electrochemical impedance spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy to clearly elaborate the corrosion behavior of PCB-ENIG in the atmospheric environment. Results indicated that the cathodic process of PCB-ENIG under ATEL was dominated by the reduction of dissolved oxygen, corrosion products, and H2O. The cathodic current density of PCB-ENIG increased progressively with increasing RH. Moreover, its cathodic current density in the solution was greater than that under ATEL. This result demonstrated that the diffusion process was not the controlling step during the limiting reduction of cathodic oxygen. When the polarization potentials were located in a more negative region, the cathodic polarization current density gradually decreased under 75% and 85% RH. Notably, the anodic process became the controlling step in the extremely thin liquid film during the remainder of the experiment.
基金Project (SBZDPY-11-17) supported by the Fund on Key Laboratory Project for Hydrodynamic Force, Ministry of Education, China Project (SZD0502-09-0) supported by Key Disciplines of Materials Processing Engineering of Sichuan Province, China
文摘The special experimental device and sulfuric acid electrolyte were adopted to study the influence of anodic oxidation heat on hard anodic film for 2024 aluminum alloy. Compared with the oxidation heat transferred to the electrolyte through anodic film, the heat transferred to the coolant through aluminum substrate is more beneficial to the growth of anodic film. The film forming speed, film thickness, density and hardness are significantly increased as the degree of undercooling of the coolant increases. The degree of undercooling of the coolant, which is necessary for the growth of anodic film, is related to the degree of undercooling of the electrolyte, thickness of aluminum substrate, thickness of anodic film, natural parameters of bubble covering and current density. The microstructure and performance of the oxidation film could be controlled by the temperature of the coolant.
基金supported by the National Natural Science Foundation of China (Grant No. 51131005)
文摘The current distributions over carbon steel under iron red alkyd primer exposed to 3.5% sodium chloride solution were mapped using the wire beam electrode （WBE）. The electrochemical impedance spectroscopy （EIS） of the WBE was carded out to analyze the performance of coating delamination and corrosion behavior of carbon steel beneath defective coating. The EIS data revealed that protective capability of coating decreased with immersion time and the degree of cathodic delamination showed a rapid rise. The current density distribution of WBE indicated that cathodic sites was located at the defect at the beginning of immersion and gradually spread into the intact coating. The cathodic regions were distinguished from the anodic area and distributed over the WBE. The changes of cathodic sites could reflect the deterioration process of defective coating. The cathodic area ratio was a more useful parameter than the cathodic delamination degree to evaluate the coating cathodic delamination. The polarity reversals of electrodes at the defect and beneath coating were observed. A simple discussion of relationship between the blister and the polarity reversal was made from a standpoint of electrochemical distribution. WBE method was able to map and record the changes of local cathodic sites beneath defective coating in real time, which could provide more detailed information about the local degradation of coating.
基金Project(50725416) supported by the National Science Fund for Distinguished Young Scholars,China
文摘The effects of mercury ions on gold cyanidation were studied. The results show that under low cyanide concentration, gold cyanide process is controlled by CN- transfer, while at higher cyanide concentration, there forms passivation on gold surface. Therefore, chemical oxidation of gold in cyanide solution of higher concentration is controlled by surface reaction. Small quantity of additions of mercury ions bring about great increases in anodic gold dissolution rate, decreases the passivation and reduces the equilibrium activated energy. In addition, they also markedly change the effect pattern of cyanide concentration. Mercury ions show positive effects on cathodic reduction of oxygen and raise the rate of electrochemical step of the cathodic reduction of oxygen. Addition of a certain amount of hydrogen peroxide is confirmed to be an effective way for intensification of cathodic process on gold electrode. Active potential range and current peak on anodic dissolution are enlarged when being co-intensified with Hg^2＋ and hydrogen peroxide. Co-intensifying effect may be obtained and gold from gold concentrates. gold leaching rate is considerably increased on cyanide leaching of
文摘The corrosion resistance of 2024-T3 aluminum alloy was improved by anodizing treatment in a mixed electrolyte containing 10% sulfuric acid, 5% boric acid and 2% phosphoric acid. Electrochemical impedance spectroscopy （EIS） technique was used to study the corrosion behavior of the anodized alloy. Using Tafel plot and salt spray techniques, it is revealed that the anodizing treatment of 2024-T3 aluminum alloy in sulfuric-boric-phosphoric acids provides better corrosion resistance and durability in comparison with the anodizing treatment in phosphoric acid or sulfuric-boric acids. This electrolyte can be a suitable alternative for chromate baths which are generally used in the anodizing of aluminum alloys.
文摘Anodic processes on Cu-10 Al electrode in molten KF-AlF3-Al2O3(saturated) and suspensions were characterized using chronopotentiometric and cyclic voltammetric techniques. Effects of cryolite ratio(CR= x(KF)/x(AlF3)), temperature and particle volume fraction(φ) on the electrochemical behaviour of the anode were demonstrated. Initially, the anode was polarised in the galvanostatic mode in melt and suspensions(φ=0.12, 0.15) at 750 ℃ with 0.4 A/cm^2 current density. The anode potential in melt varied between 2.5 and 3.2 V and in suspensions(φ= 0.12) between 3.3 and 3.4 V. XRD analysis was conducted to study the oxide phases on the anode surface. Anode limiting current densities and mass transfer coefficients drastically decreased with the increase of φ in the suspension. The results suggest that the Cu-10 Al electrode works better in suspensions with CR of 1.4 and particle volume fraction of 0.09 at 800 ℃.
基金ACKNOWLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.21021001, No.20502017, and No.20872102）, and the Program for Changjiang Scholars and Innovative Research Team in University （No.0846）. The Analytic and Testing Center of Sichuan University are greatly appreciated.
文摘One-step anodic acetoxylation of benzene to phenyl acetate was studied in acetic acid-water solution using a one-compartment electrochemical cell in galvanostatic mode. Compared to the anhydrous system, the addition of water improved the current efficiency for the electrosynthesis of phenyl acetate. The maximum efficiency reached 4.8% with the selectivity of 96% to phenyl acetate when the electrolysis was carried out under the optimal conditions. The investigation also indicated that the concentration of phenyl acetate increased linearly in 12 h and reached 1.07 g/L with the selectivity of 95%. Cyclic voltammetry experiments showed that the adsorption of benzene at Pt anode enhanced by the addition of water was critical to the formation of phenyl acetate. An activated benzene mechanism was proposed for the anodic acytoxylation, and the analysis of gas products demonstrated that Kolbe reaction was the main side reaction.
基金Projects(61533021,61321003,61273185)supported by the National Natural Science Foundation of ChinaProject(2015CX007)supported by the Innovation-driven Plan in Central South University,ChinaProject(13JJ8003)supported by the Joint Fund of Hunan Provincial Natural Science Foundation of China
文摘Reagents are optimized for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in zinc sulfate solution, which contains an extremely large excess of Zn^(2+). First, the reagents and their doses for the experiment are selected according to the characteristics of the zinc sulfate solution. Then, the reagent doses are optimized by analyzing the influence of reagent dose on the polarographic parameters(i.e. half-wave potential E_(1/2) and limiting diffusion current I_p). Finally, the optimization results are verified by simultaneously determining trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+). The determination results indicate that the optimized reagents exhibit wide linearity, low detection limits, high accuracy and good precision for the simultaneous determination of trace amounts of Cu^(2+), Cd^(2+) and Co^(2+) in the presence of an extremely large excess of Zn^(2+).
文摘Objective The correlation between various formative conditions and the pore characterizationsof the anodic alumina membrane is investigated to seek the optimal conditions for the formation of anodic aluminamembrane. Methods High purity aluminum foils are used as the starting materials. The anodization is conduc-ted in three types of electrolytes, 3% sulfuric acid, 5% sulfuric acid and 2. 7% oxalic acid, respectively, with dif-ferent voltages at for 48h. The characterizations of the pore size, the effective porosity and the pore porosity areobserved and determined by scanning electron microscopy. The hydraulic conductances of the membranes are meas-ured to confirm that the pores are open and evaluate the permselectivity of the membranes. Results The experi-mental result shows that the ordered pore arrays are obtained for oxidation under our experimental conditions. Withthe increasing of the voltage, the pore size and pore porosity increased significantly (P <0.05) , while the effectiveporosity decreased significantly (P <0.05) with the same electrolyte. The pore size formed in 3% sulfuric acid or5% sulfuric acid is much smaller than in 2. 7% oxalic acid as an electrolyte. The hydraulic conductance of anodicalumina membrane that formed under our experimental condition is higher than those of the membranes are availablecurrently used in clinical. Conclusion The results suggest that the optimal conditions for the formation of anodicalumina membrane that used in hemodialysis are in 3% or 5% sulfuric acid with 12. 5V to 17. 5V at for 48h.
基金Projects(51204208,51374240)supported by the National Natural Science Foundation of ChinaProject(2014zzts028)supported by the Fundamental Research Funds for the Central Universities of Central South University,China
文摘An attempt was made to build up a thick and compact oxide layer rapidly by pre-treating the Pb-Ag-Nd anode in fluoride-containing H2SO4 solution. The passivation reaction of Pb-Ag-Nd anode during pre-treatment process was investigated using cyclic voltammetry, linear scanning voltammetry, environmental scanning electron microscopy and X-ray diffraction analysis. The results show that Pb F2 and PbSO4 are formed near the potential of Pb/PbSO4 couple. The pre-treatment in fluoride-containing H2SO4 solution contributes to the formation of a thick, compact and adherent passive film. Furthermore, pre-treatment in fluoride-containing H2SO4 solution also facilitates the formation of PbO2 on the anodic layer, and the reason could be attributed to the formation of more PbF2 and PbSO4 during the pre-treatment which tend to transform to PbO2 during the following electrowinning process. In addition, the anodic layer on anode with pre-treatment in fluoride-containing H2SO4 solution is thick and compact, and its predominant composition is β-PbO2. In summary, the pre-treatment in fluoride-containing H2SO4 solution benefits the formation of a desirable protective layer in a short time.
基金the Natural Science Foundation of Guangdong Province (No. 020839).
文摘Ionic liquids have negligibly low vapor pressure, high stability and polarity. They are regarded as green solvents. Enzymes, especially lipases, as well as whole-cell of microbe, are catalytically active in ionic liquids or aqueous-ionic liquid biphasic systems. Up to date, there have been many reports on enzyme-exhibited features and enzyme-mediated reactions in ionic liquids. In many cases, remarkable results with respect to yield, catalytic activity, stability and (enantio-, regio-) selectivity were obtained in ionic liquids in comparison with those observed in conventional media. Accordingly, ionic liquids provide new possibilities for the application of new type of solvent in biocatalytic reactions.
基金Supported by the National Basic Research Program(973 Program)of China(2010CB227201)the State Key Program of National Natural Science of China(21236003)+2 种基金the National Natural Science Foundation of China(21476022)the Fundamental Research Funds for the Central Universities(JD1515 and YS1406)Beijing Higher Education Young Elite Teacher Project(YETP0509)
文摘An investigation was performed on the suitability of carbon materials, metallic lead and its alloys as substrates for zinc negative electrode in acid PbO2-Zn single flow batteries. The zinc deposition process was carried out in the mediumofl mol.L 1H2SO4 at room temperature. No maximum current appears on the potentiostatic current transients for the zinc deposition on lead and its alloys. With increasing overpotential, the progressive nucleation turns to be a 3D-instantaneous nucleation process for the resin-graphite composite. Hydrogen evolution on the graphite composite is effectively suppressed with the doping of a polymer resin. The hydrogen evolution reaction on the lead is relatively weak, while on the lead alloys, it becomes serious to a certain degree. Although the ex- change current density of zinc deposition and dissolution process on the graphite composite is relatively low, the zinc corrosion is weakened to a great extent. With the increase of deposition time, zinc deposits are more compact. The cyclings of zinc galvanostatic charge-discharge on the graphite composite provide more than 90% of coulombic and 80% of energy efficiencies, and exhibit superior cycling stability during the first 10 cycles.
文摘The investigation of electrodeposition of rhenium in alkaline and acidic electrolytes was carried out, polarization curves were obtained by electrochemically and cyclically potentiodynamic methods. By the investigation of rhenium concentration, sulphuric acid, alkali, ammonium sulphate, temperature and acidity of solution, it was found that reaming velocity was an optimal regime and electrolyte composition for an obtaining of high quality rhenium deposits from an alkaline electrolyte and acidic electrolyte. It was defined that the process of electrodeposition of rhenium in alkaline electrolyte is accompanied by chemical polarization and the electrodeposition of rhenium in acidic electrolyte goes gradually with the formation of intermediate films of sediments,
基金the National Natural Science Foundation of China (Grant No. 50408024)Zhejiang Provincial Natural Science Foundation of China(Grant No. M203034 and Y505036).
文摘The electrochemical reduction of CO2 on a Pb electrode was investigated in 0. 1 mol/L KOH/methanol electrolyte at different temperatures and pressures. A graphite electrode was employed as the counter electrode, and an AglAgCl （sat. KCl） electrode was used as the reference electrode. The Tafel plots of the products by the electrochemical reduction of CO2 showed that the formation process of HCOOH differed from that of CO and the reduction of CO2was not limited by the diffusion of CO2 in the investigated potential range. Kinetic analysis indicated that the reaction orders were 0. 573 for electrochemical reduction of CO2 to CO and 0. 671 for CO2 to HCOOH in the cathodic direction.
文摘DCMSL （depolarization components of molecular scattering of light） have been studied within the wide spectral range （0-200 cm-1） and in the temperature intervals （20-200 ℃） in toluol （C6HsCH3） and aniline （C6HsNH2）. It has been shown that when a liquid is heated and temperatures approach to critical ones, a significant contribution of DCMSL is made by vibration motion of molecules. The special properties of the temperature-frequency behavior of DCMSL spectra are discussed from the view point of hindered rotation of liquid molecules with consideration of intermolecular interaction.
文摘A new method of preparing thin film metal-hydride electrodes for metal-hydride batteries is described. The method consists of simultaneous deposition of multi-component metallic species onto a substrate while bombarding the growing, deposited thin film electrode with a low energy hydrogen ion beam An amorphous LaNi4 hydride thin film electrode has been prepared by this Hydrogen Ion Beam Assisted Deposition （HIBAD） technique. The electrochemical discharge capacity and cycle life of this electrode in a 6 M KOH solution surpass previously reported values for La-Ni thin film electrodes prepared by other deposition methods.
