Maximizing the power capture is an important issue to the turbines that are installed in low wind speed area. In this paper, we focused on the modeling and control of variable speed wind turbine that is composed of tw...Maximizing the power capture is an important issue to the turbines that are installed in low wind speed area. In this paper, we focused on the modeling and control of variable speed wind turbine that is composed of two-mass drive train, a Squirrel Cage Induction Generator (SCIG), and voltage source converter control by Space Vector Pulse Width Modulation (SPVWM). To achieve Maximum Power Point Tracking (MPPT), the reference speed to the generator is searched via Extremum Seeking Control (ESC). ESC was designed for wind turbine region II operation based on dither-modulation scheme. ESC is a model-free method that has the ability to increase the captured power in real time under turbulent wind without any requirement for wind measurements. The controller is designed in two loops. In the outer loop, ESC is used to set a desired reference speed to PI controller to regulate the speed of the generator and extract the maximum electrical power. The inner control loop is based on Indirect Field Orientation Control (IFOC) to decouple the currents. Finally, Particle Swarm Optimization (PSO) is used to obtain the optimal PI parameters. Simulation and control of the system have been accomplished using MATLAB/Simulink 2014.展开更多
With the rapid advancement of machine learning technology and its growing adoption in research and engineering applications,an increasing number of studies have embraced data-driven approaches for modeling wind turbin...With the rapid advancement of machine learning technology and its growing adoption in research and engineering applications,an increasing number of studies have embraced data-driven approaches for modeling wind turbine wakes.These models leverage the ability to capture complex,high-dimensional characteristics of wind turbine wakes while offering significantly greater efficiency in the prediction process than physics-driven models.As a result,data-driven wind turbine wake models are regarded as powerful and effective tools for predicting wake behavior and turbine power output.This paper aims to provide a concise yet comprehensive review of existing studies on wind turbine wake modeling that employ data-driven approaches.It begins by defining and classifying machine learning methods to facilitate a clearer understanding of the reviewed literature.Subsequently,the related studies are categorized into four key areas:wind turbine power prediction,data-driven analytic wake models,wake field reconstruction,and the incorporation of explicit physical constraints.The accuracy of data-driven models is influenced by two primary factors:the quality of the training data and the performance of the model itself.Accordingly,both data accuracy and model structure are discussed in detail within the review.展开更多
This letter presents a systematic approach to estimate the annual energy production(AEP) of variable-speed wind turbines erected at high-altitude sites. Compared with the existing empirical-model based approaches, the...This letter presents a systematic approach to estimate the annual energy production(AEP) of variable-speed wind turbines erected at high-altitude sites. Compared with the existing empirical-model based approaches, the proposed approach models the influence of the air density on the power production while employing the theoretical power curve. Consequently, the proposed approach provides a precise estimation of AEP, which can serve as a foundation of the optimum turbinesite matching design at different-altitude sites.展开更多
Due to varying characteristics of the wind condition, the performance of the wind turbines can be optimized by adapting the parameters of the control system. In this letter, an adaptive technique is proposed for the n...Due to varying characteristics of the wind condition, the performance of the wind turbines can be optimized by adapting the parameters of the control system. In this letter, an adaptive technique is proposed for the novel model predictive control(MPC) for the yaw system of the wind turbines. The control horizon is adapted to the one with the best predictive performance among multiple control horizons. The adaptive MPC is demonstrated by simulations using real wind data, and its performance is compared with the baseline MPC at fixed control horizon. Results show that the adaptive MPC provides better comprehensive performance than the baseline ones at different preview time of wind directions. Therefore, the proposed adaptive technique is potentially useful for the wind turbines in the future.展开更多
In this paper,an adaptive interval type-2 fuzzy controller is proposed for variable-speed and variable-pitch wind turbines.Because of attractive features of the well-known wind turbine baseline controller,the proposed...In this paper,an adaptive interval type-2 fuzzy controller is proposed for variable-speed and variable-pitch wind turbines.Because of attractive features of the well-known wind turbine baseline controller,the proposed controller acts as an augmented controller and works in parallel to the baseline controller.As typical variable-speed wind turbines have different controllers for different operation regions,for each operation region,a dedicated interval tvpe-2 fuzzy controller is designed.Because of the uncertainty in wind speed measurement,modern control techniques try to estimate this value.However,in contrast to these modern control techniques,the proposed controller is independent of the wind speed estimation.Thus,there is a better saving in cost and computational burden.To evaluate the effectiveness of the proposed controller,simulations are conducted with wind profiles which span all operation regions.Results show that,compared with the baseline controller,the proposed controller enhances power generations and reduces mechanical loads concurrently.展开更多
In general,Variable-Speed Constant Frequency (VSCF)Wind generation system is controlled by stator voltage orientation method which based on the mathematic model of VSCF Wind generation system and discussed the control...In general,Variable-Speed Constant Frequency (VSCF)Wind generation system is controlled by stator voltage orientation method which based on the mathematic model of VSCF Wind generation system and discussed the control strategy.Present the whole dynamic control model of variable-speed wind generator system in MATLAB/ Simulink,and the simulation results confirm the validity and effectiveness of the proposed control strategy.展开更多
Wind energy provides a sustainable solution to the ever-increasing demand for energy.Micro-wind turbines offer a promising solution for low-wind speed,decentralized power generation in urban and remote areas.Earlier r...Wind energy provides a sustainable solution to the ever-increasing demand for energy.Micro-wind turbines offer a promising solution for low-wind speed,decentralized power generation in urban and remote areas.Earlier researchers have explored the design,development,and performance analysis of a micro-wind turbine system tailored for small-scale renewable energy generation.Researchers have investigated various aspects such as aerodynamic considerations,structural integrity,efficiency optimization to ensure reliable and cost-effective operation,blade design,generator selection,and control strategies to enhance the overall performance of the system.The objective of this paper is to provide a comprehensive design and performance review of horizontal and vertical micro-wind turbines.The study begins with an overview of the current landscape of wind energy across the globe and India in particular,highlighting key challenges and opportunities.Numerical and experimental studies were used to validate the designs.Horizontal Axis Wind Turbines(HAWTs)with ducts or shrouds are suitable for microscale and low-speed applications.Researchers investigated the position and location of the turbines to enhance their performance in urban settings.Airflow and airfoil noise produce aerodynamic noise,which is the most significant disadvantage of wind turbines.The findings provide valuable insights for stakeholders interested in advancing micro-wind turbine technology.The highlighted research opportunities may be pursued further to improve the efficiency,reliability,and overall performance of micro-wind turbines.展开更多
With the rapid development of large megawatt wind turbines,the operation environment of wind turbine towers(WTTs)has become increasingly complex.In particular,seismic excitation can create a resonance response and cau...With the rapid development of large megawatt wind turbines,the operation environment of wind turbine towers(WTTs)has become increasingly complex.In particular,seismic excitation can create a resonance response and cause excessive vibration of the WTT.To investigate the vibration attenuation performance of the WTT under seismic excitations,a novel passive vibration control device,called a prestressed tuned mass damper(PS-TMD),is presented in this study.First,a mathematical model is established based on structural dynamics under seismic excitation.Then,the mathematical analytical expression of the dynamic coefficient is deduced,and the parameter design method is obtained by system tuning optimization.Next,based on a theoretical analysis and parameter design,the numerical results showed that the PS-TMD was able to effectively mitigate the resonance under the harmonic basal acceleration.Finally,the time-history analysis method is used to verify the effectiveness of the traditional pendulum tuned mass damper(PTMD)and the novel PS-TMD device,and the results indicate that the vibration attenuation performance of the PS-TMD is better than the PTMD.In addition,the PS-TMD avoids the nonlinear effect due to the large oscillation angle,and has the potential to dissipate hysteretic energy under seismic excitation.展开更多
In recent years,the exploitation of offshore wind resources has been attached with greater importance.As a result,semi-submersible floating wind turbines(FWTs)have gradually become a popular research topic,with the st...In recent years,the exploitation of offshore wind resources has been attached with greater importance.As a result,semi-submersible floating wind turbines(FWTs)have gradually become a popular research topic,with the structural strength being a research hotspot as it can ensure the safe operation of FWTs.The severe sea conditions of freak waves result in enormous wave heights,extremely fast wave speeds,and concentrated energy.Thus,it is difficult to accurately simulate these effects on the loads of floating wind turbines using the potential flow theory and other theories.In this paper,the structural strength of a floating wind turbine under the action of freak waves is analyzed based on the CFD-FEA coupled method.The effects of the mooring system and the wind load are considered in the time domain,and the CFD method is applied to analyze the wave load of the floating wind turbine under the extreme sea state of freak waves.The strength and motion of the floating wind turbine float structure are analyzed by combining the CFD method and the FEA method,and the analytical results of the mutual transfer of these two methods are taken as the initial quantities for further analysis.The accuracy of the analytical model of the CFD-FEA method is verified by the results of the tank test analysis,and the structural strength analysis under freak wave conditions is carried out for a new type of floating wind turbine.The results of this research provide useful guidance and references for the design and engineering applications of offshore floating wind turbines.展开更多
The effects of the erosion present on the leading edge of a wind turbine airfoil(DU 96-W-180)on its aerodynamic performances have been investigated numerically in the framework of a SST k–ωturbulence model based on ...The effects of the erosion present on the leading edge of a wind turbine airfoil(DU 96-W-180)on its aerodynamic performances have been investigated numerically in the framework of a SST k–ωturbulence model based on the Reynolds Averaged Navier-Stokes equations(RANS).The results indicate that when sand-induced holes and small pits are involved as leading edge wear features,they have a minimal influence on the lift and drag coefficients of the airfoil.However,if delamination occurs in the same airfoil region,it significantly impacts the lift and resistance characteristics of the airfoil.Specifically,as the angle of attack grows,there is a significant decrease in the lift coefficient accompanied by a sharp increase in the drag coefficient.As wear intensifies,these effects gradually increase.Moreover,the leading edge wear can exacerbate flow separation near the trailing edge suction surface of the airfoil and cause forward displacement of the separation point.展开更多
Vertical Axis Wind Turbines(VAWTs)offer several advantages over horizontal axis wind turbines(HAWTs),including quieter operation,ease of maintenance,and simplified construction.Surprisingly,despite the prevailing beli...Vertical Axis Wind Turbines(VAWTs)offer several advantages over horizontal axis wind turbines(HAWTs),including quieter operation,ease of maintenance,and simplified construction.Surprisingly,despite the prevailing belief that HAWTs outperform VAWTs as individual units,VAWTs demonstrate higher power density when arranged in clusters.This phenomenon arises from positive wake interactions downstream of VAWTs,potentially enhancing the overall wind farm performances.In contrast,wake interactions negatively impact HAWT farms,reducing their efficiency.This paper extensively reviews the potential of VAWT clusters to increase energy output and reduce wind energy costs.A precise terminology is introduced to clarify ambiguous terms researchers use to quantify cluster parameters.While examining commonly studied and proposed VAWT cluster configurations,several aspects are discussed such as aerodynamic interactions,wake characteristics,structural dynamics,and performance metrics.Additionally,the current state-of-the-art and research gaps are critically described.The review also covers computational modeling,optimization techniques,advanced control strategies,machine learning applications,economic considerations,and the influence of terrain and application locations.展开更多
To enhance the aerodynamic performance of wind turbine blades,this study proposes the adoption of a bionic airfoil inspired by the aerodynamic shape of an eagle.Based on the blade element theory,a non-uniform extracti...To enhance the aerodynamic performance of wind turbine blades,this study proposes the adoption of a bionic airfoil inspired by the aerodynamic shape of an eagle.Based on the blade element theory,a non-uniform extraction method of blade elements is employed for the optimization design of the considered wind turbine blades.Moreover,Computational Fluid Dynamics(CFD)is used to determine the aerodynamic performances of the eagle airfoil and a NACA2412 airfoil,thereby demonstrating the superior aerodynamic performance of the former.Finally,a mathematical model for optimizing the design of wind turbine blades is introduced and a comparative analysis is conducted with respect to the aerodynamic performances of blades designed using a uniform extraction approach.It is found that the blades designed using non-uniform extraction exhibit better aerodynamic performance.展开更多
Timely inspection of defects on the surfaces of wind turbine blades can effectively prevent unpredictable accidents.To this end,this study proposes a semi-supervised object-detection network based on You Only Looking ...Timely inspection of defects on the surfaces of wind turbine blades can effectively prevent unpredictable accidents.To this end,this study proposes a semi-supervised object-detection network based on You Only Looking Once version 4(YOLOv4).A semi-supervised structure comprising a generative adversarial network(GAN)was designed to overcome the difficulty in obtaining sufficient samples and sample labeling.In a GAN,the generator is realized by an encoder-decoder network,where the backbone of the encoder is YOLOv4 and the decoder comprises inverse convolutional layers.Partial features from the generator are passed to the defect detection network.Deploying several unlabeled images can significantly improve the generalization and recognition capabilities of defect-detection models.The small-scale object detection capacity of the network can be improved by enhancing essential features in the feature map by adding the concurrent spatial and channel squeeze and excitation(scSE)attention module to the three parts of the YOLOv4 network.A balancing improvement was made to the loss function of YOLOv4 to overcome the imbalance problem of the defective species.The results for both the single-and multi-category defect datasets show that the improved model can make good use of the features of the unlabeled images.The accuracy of wind turbine blade defect detection also has a significant advantage over classical object detection algorithms,including faster R-CNN and DETR.展开更多
Time-series anomaly detection plays a crucial role in the operation of offshore wind turbines.Various wind turbine monitoring systems rely on time-series data to monitor and identify anomalies in real-time,as well as ...Time-series anomaly detection plays a crucial role in the operation of offshore wind turbines.Various wind turbine monitoring systems rely on time-series data to monitor and identify anomalies in real-time,as well as to initiate early warning processes.However,for offshore wind turbines with a high data density,conventional methods have high computational overhead in detecting anomalies while failing to accurately detect anomalies due to variations in data scales.To address this challenge,we propose an efficient anomaly detection method with contrastive learning,called Hawkeye.Hawkeye is based on residual clustering,an unsupervised anomaly detection method for multivariate time-series data.To ensure accurate anomaly detection,a trend-capturing prediction module is also combined with an automatic labeling module.As a result,the most common information can be learned from multivariate time-series data to reconstruct data trends.By evaluating Hawkeye on public datasets and real-world offshore wind turbine operational datasets,the results show that Hawkeye’s F_(1)-score improves by an average of 14% compared with Isolation Forest,and its size shrinks by up to 11.5 times on the largest dataset compared with other methods.The proposed Hawkeye is potential to real-time monitoring and early warning systems for wind turbines,accelerating the development of intelligent operation and maintenance.展开更多
The focus of this research was on the equivalent particle roughness height correction required to account for the presence of ice when determining the performances of wind turbines.In particular,two icing processes(fr...The focus of this research was on the equivalent particle roughness height correction required to account for the presence of ice when determining the performances of wind turbines.In particular,two icing processes(frost ice and clear ice)were examined by combining the FENSAP-ICE and FLUENT analysis tools.The ice type on the blade surfaces was predicted by using a multi-time step method.Accordingly,the influence of variations in icing shape and ice surface roughness on the aerodynamic performance of blades during frost ice formation or clear ice formation was investigated.The results indicate that differences in blade surface roughness and heat flux lead to disparities in both ice formation rate and shape between frost ice and clear ice.Clear ice has a greater impact on aerodynamics compared to frost ice,while frost ice is significantly influenced by the roughness of its icy surface.展开更多
As offshore wind farms expand into deeper and farther ocean regions and the unit capacity of offshore wind turbines(OWTs)increases,there is a pressing need for a new foundation structure that can accommodate deep-sea ...As offshore wind farms expand into deeper and farther ocean regions and the unit capacity of offshore wind turbines(OWTs)increases,there is a pressing need for a new foundation structure that can accommodate deep-sea conditions and support large capacities while maintaining economical and safe.To meet this goal of integrated transportation and one-step installation,a novel five-bucket jacket foundation(FBJF),with its suction installation and leveling methods in sand,has been proposed,analyzed and experimentally studied.First,seepage failure experiments of the FBJF at various depths were conducted,and a formula for calculating the critical suction of seepage failure suitable for the FBJF in sand was chosen and recommended for use with a range of values for the permeability coefficient ratio.Second,through leveling experiments of the FBJF at different depths,the maximum adjustable leveling angle during the sinking process was defined using seepage failure and the adjustable leveling angle of the foundation as control criteria.Various leveling control strategies were proposed and verified.Finally,an automatic sinking and leveling control system for the FBJF was developed and experimentally verified for feasibility.展开更多
Local scour around offshore wind turbine foundations presents a considerable challenge due to its potential influence on structural stability,driven by hydrodynamic forces.While research has made strides in comprehend...Local scour around offshore wind turbine foundations presents a considerable challenge due to its potential influence on structural stability,driven by hydrodynamic forces.While research has made strides in comprehending scouring mechanisms,notable complexities persist,specifically with newer foundation types.Addressing these limitations is vital for advancing our understanding of scour mechanisms and for improving mitigation strategies in offshore wind energy development.This review synthesizes current findings on local scour across various offshore foundations,encompassing field observations,data-driven approaches,turbulence-sediment interactions,scour evolution processes,influencing factors,and numerical model advancements.The objective is to enrich our understanding of local scour mechanisms.In addition,future research directions are outlined,including the development of robust arti-ficial intelligence models for accurate predictions,the exploration of vortex structure characteristics,and the refinement of numerical models to strengthen prediction capabilities while minimizing computational efforts.展开更多
To study the impact of the trailing-edge wear on the vibrational behavior of wind-turbine blades,unworn blades and trailing-edge worn blades have been assessed through relevant modal tests.According to these experimen...To study the impact of the trailing-edge wear on the vibrational behavior of wind-turbine blades,unworn blades and trailing-edge worn blades have been assessed through relevant modal tests.According to these experiments,the natural frequencies of trailing-edge worn blades-1,-2,and-3 increase the most in the second to fourth order,thefifth order increases in the middle,and thefirst order increases the least.The damping ratio data indi-cate that,in general,thefirstfive-order damping ratios of trailing-edge worn blades-1 and trailing-edge worn blades-2 are reduced,and thefirstfive-order damping ratios of trailing-edge worn blades-3 are slightly improved.The mode shape diagram shows that the trailing-edge worn blades-1 and-2 have a large swing in the tip and the blade,whereas the second-and third-order vibration shapes of the trailing edge-worn blade-3 tend to be improved.Overall,all these results reveal that the blade’s mass and the wear area are the main fac-tors affecting the vibration characteristics of wind turbine blades.展开更多
Important challenges must be addressed to make wind turbines sustainable renewable energy sources.A typical problem concerns the design of the foundation.If the pile diameter is larger than that of the jacket platform...Important challenges must be addressed to make wind turbines sustainable renewable energy sources.A typical problem concerns the design of the foundation.If the pile diameter is larger than that of the jacket platform,traditional mechanical models cannot be used.In this study,relying on the seabed soil data of an offshore wind farm,the m-method and the equivalent embedded method are used to address the single-pile wind turbine foundation problem for different pile diameters.An approach to determine the equivalent pile length is also proposed accordingly.The results provide evidence for the effectiveness and reliability of the model based on the equivalent embedded method.展开更多
文摘Maximizing the power capture is an important issue to the turbines that are installed in low wind speed area. In this paper, we focused on the modeling and control of variable speed wind turbine that is composed of two-mass drive train, a Squirrel Cage Induction Generator (SCIG), and voltage source converter control by Space Vector Pulse Width Modulation (SPVWM). To achieve Maximum Power Point Tracking (MPPT), the reference speed to the generator is searched via Extremum Seeking Control (ESC). ESC was designed for wind turbine region II operation based on dither-modulation scheme. ESC is a model-free method that has the ability to increase the captured power in real time under turbulent wind without any requirement for wind measurements. The controller is designed in two loops. In the outer loop, ESC is used to set a desired reference speed to PI controller to regulate the speed of the generator and extract the maximum electrical power. The inner control loop is based on Indirect Field Orientation Control (IFOC) to decouple the currents. Finally, Particle Swarm Optimization (PSO) is used to obtain the optimal PI parameters. Simulation and control of the system have been accomplished using MATLAB/Simulink 2014.
基金Supported by the National Natural Science Foundation of China under Grant No.52131102.
文摘With the rapid advancement of machine learning technology and its growing adoption in research and engineering applications,an increasing number of studies have embraced data-driven approaches for modeling wind turbine wakes.These models leverage the ability to capture complex,high-dimensional characteristics of wind turbine wakes while offering significantly greater efficiency in the prediction process than physics-driven models.As a result,data-driven wind turbine wake models are regarded as powerful and effective tools for predicting wake behavior and turbine power output.This paper aims to provide a concise yet comprehensive review of existing studies on wind turbine wake modeling that employ data-driven approaches.It begins by defining and classifying machine learning methods to facilitate a clearer understanding of the reviewed literature.Subsequently,the related studies are categorized into four key areas:wind turbine power prediction,data-driven analytic wake models,wake field reconstruction,and the incorporation of explicit physical constraints.The accuracy of data-driven models is influenced by two primary factors:the quality of the training data and the performance of the model itself.Accordingly,both data accuracy and model structure are discussed in detail within the review.
基金This work was supported by the National Natural Science Foundation of China(No.61803393)the Natural Science Foundation of Hunan Province(No.2020JJ4751)the Basic Science Research Program through the National Research Foundation(NRF)of Korea funded by the Ministry of Education(No.NRF-2016R1A6A1A03013567).
文摘This letter presents a systematic approach to estimate the annual energy production(AEP) of variable-speed wind turbines erected at high-altitude sites. Compared with the existing empirical-model based approaches, the proposed approach models the influence of the air density on the power production while employing the theoretical power curve. Consequently, the proposed approach provides a precise estimation of AEP, which can serve as a foundation of the optimum turbinesite matching design at different-altitude sites.
基金supported by the National Natural Science Foundation of China (No. 61803393)the Natural Science Foundation of Hunan Province (No.2020JJ4751)+1 种基金the Innovation-Driven Project of Central South University (No.2020CX031)the Basic Science Research Program of Korea (No. NRF-2016R1A6A1A03013567)。
文摘Due to varying characteristics of the wind condition, the performance of the wind turbines can be optimized by adapting the parameters of the control system. In this letter, an adaptive technique is proposed for the novel model predictive control(MPC) for the yaw system of the wind turbines. The control horizon is adapted to the one with the best predictive performance among multiple control horizons. The adaptive MPC is demonstrated by simulations using real wind data, and its performance is compared with the baseline MPC at fixed control horizon. Results show that the adaptive MPC provides better comprehensive performance than the baseline ones at different preview time of wind directions. Therefore, the proposed adaptive technique is potentially useful for the wind turbines in the future.
文摘In this paper,an adaptive interval type-2 fuzzy controller is proposed for variable-speed and variable-pitch wind turbines.Because of attractive features of the well-known wind turbine baseline controller,the proposed controller acts as an augmented controller and works in parallel to the baseline controller.As typical variable-speed wind turbines have different controllers for different operation regions,for each operation region,a dedicated interval tvpe-2 fuzzy controller is designed.Because of the uncertainty in wind speed measurement,modern control techniques try to estimate this value.However,in contrast to these modern control techniques,the proposed controller is independent of the wind speed estimation.Thus,there is a better saving in cost and computational burden.To evaluate the effectiveness of the proposed controller,simulations are conducted with wind profiles which span all operation regions.Results show that,compared with the baseline controller,the proposed controller enhances power generations and reduces mechanical loads concurrently.
文摘In general,Variable-Speed Constant Frequency (VSCF)Wind generation system is controlled by stator voltage orientation method which based on the mathematic model of VSCF Wind generation system and discussed the control strategy.Present the whole dynamic control model of variable-speed wind generator system in MATLAB/ Simulink,and the simulation results confirm the validity and effectiveness of the proposed control strategy.
文摘Wind energy provides a sustainable solution to the ever-increasing demand for energy.Micro-wind turbines offer a promising solution for low-wind speed,decentralized power generation in urban and remote areas.Earlier researchers have explored the design,development,and performance analysis of a micro-wind turbine system tailored for small-scale renewable energy generation.Researchers have investigated various aspects such as aerodynamic considerations,structural integrity,efficiency optimization to ensure reliable and cost-effective operation,blade design,generator selection,and control strategies to enhance the overall performance of the system.The objective of this paper is to provide a comprehensive design and performance review of horizontal and vertical micro-wind turbines.The study begins with an overview of the current landscape of wind energy across the globe and India in particular,highlighting key challenges and opportunities.Numerical and experimental studies were used to validate the designs.Horizontal Axis Wind Turbines(HAWTs)with ducts or shrouds are suitable for microscale and low-speed applications.Researchers investigated the position and location of the turbines to enhance their performance in urban settings.Airflow and airfoil noise produce aerodynamic noise,which is the most significant disadvantage of wind turbines.The findings provide valuable insights for stakeholders interested in advancing micro-wind turbine technology.The highlighted research opportunities may be pursued further to improve the efficiency,reliability,and overall performance of micro-wind turbines.
基金Fundamental Research Funds for the National Natural Science Foundation of China under Grant No.52078084the Natural Science Foundation of Chongqing (cstc2021jcyj-msxmX0623)+2 种基金the 111 project of the Ministry of Educationthe Bureau of Foreign Experts of China under Grant No.B18062China Postdoctoral Science Foundation under Grant No.2021M690838。
文摘With the rapid development of large megawatt wind turbines,the operation environment of wind turbine towers(WTTs)has become increasingly complex.In particular,seismic excitation can create a resonance response and cause excessive vibration of the WTT.To investigate the vibration attenuation performance of the WTT under seismic excitations,a novel passive vibration control device,called a prestressed tuned mass damper(PS-TMD),is presented in this study.First,a mathematical model is established based on structural dynamics under seismic excitation.Then,the mathematical analytical expression of the dynamic coefficient is deduced,and the parameter design method is obtained by system tuning optimization.Next,based on a theoretical analysis and parameter design,the numerical results showed that the PS-TMD was able to effectively mitigate the resonance under the harmonic basal acceleration.Finally,the time-history analysis method is used to verify the effectiveness of the traditional pendulum tuned mass damper(PTMD)and the novel PS-TMD device,and the results indicate that the vibration attenuation performance of the PS-TMD is better than the PTMD.In addition,the PS-TMD avoids the nonlinear effect due to the large oscillation angle,and has the potential to dissipate hysteretic energy under seismic excitation.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52071161 and 52301322)the Jiangsu Provincial Natural Science Foundation(Grant No.BK20220653).
文摘In recent years,the exploitation of offshore wind resources has been attached with greater importance.As a result,semi-submersible floating wind turbines(FWTs)have gradually become a popular research topic,with the structural strength being a research hotspot as it can ensure the safe operation of FWTs.The severe sea conditions of freak waves result in enormous wave heights,extremely fast wave speeds,and concentrated energy.Thus,it is difficult to accurately simulate these effects on the loads of floating wind turbines using the potential flow theory and other theories.In this paper,the structural strength of a floating wind turbine under the action of freak waves is analyzed based on the CFD-FEA coupled method.The effects of the mooring system and the wind load are considered in the time domain,and the CFD method is applied to analyze the wave load of the floating wind turbine under the extreme sea state of freak waves.The strength and motion of the floating wind turbine float structure are analyzed by combining the CFD method and the FEA method,and the analytical results of the mutual transfer of these two methods are taken as the initial quantities for further analysis.The accuracy of the analytical model of the CFD-FEA method is verified by the results of the tank test analysis,and the structural strength analysis under freak wave conditions is carried out for a new type of floating wind turbine.The results of this research provide useful guidance and references for the design and engineering applications of offshore floating wind turbines.
基金Natural Science Foundation of Liaoning Province(2022-MS-305)Foundation of Liaoning Province Education Administration(LJKZ1108).
文摘The effects of the erosion present on the leading edge of a wind turbine airfoil(DU 96-W-180)on its aerodynamic performances have been investigated numerically in the framework of a SST k–ωturbulence model based on the Reynolds Averaged Navier-Stokes equations(RANS).The results indicate that when sand-induced holes and small pits are involved as leading edge wear features,they have a minimal influence on the lift and drag coefficients of the airfoil.However,if delamination occurs in the same airfoil region,it significantly impacts the lift and resistance characteristics of the airfoil.Specifically,as the angle of attack grows,there is a significant decrease in the lift coefficient accompanied by a sharp increase in the drag coefficient.As wear intensifies,these effects gradually increase.Moreover,the leading edge wear can exacerbate flow separation near the trailing edge suction surface of the airfoil and cause forward displacement of the separation point.
文摘Vertical Axis Wind Turbines(VAWTs)offer several advantages over horizontal axis wind turbines(HAWTs),including quieter operation,ease of maintenance,and simplified construction.Surprisingly,despite the prevailing belief that HAWTs outperform VAWTs as individual units,VAWTs demonstrate higher power density when arranged in clusters.This phenomenon arises from positive wake interactions downstream of VAWTs,potentially enhancing the overall wind farm performances.In contrast,wake interactions negatively impact HAWT farms,reducing their efficiency.This paper extensively reviews the potential of VAWT clusters to increase energy output and reduce wind energy costs.A precise terminology is introduced to clarify ambiguous terms researchers use to quantify cluster parameters.While examining commonly studied and proposed VAWT cluster configurations,several aspects are discussed such as aerodynamic interactions,wake characteristics,structural dynamics,and performance metrics.Additionally,the current state-of-the-art and research gaps are critically described.The review also covers computational modeling,optimization techniques,advanced control strategies,machine learning applications,economic considerations,and the influence of terrain and application locations.
基金supported by the National Natural Science Foundation Projects(Grant Number 51966018)the Chongqing Natural Science Foundation of China(Grant Number cstc2020jcyjmsxmX0314)+2 种基金the Key Research&Development Program of Xinjiang(Grant Number 2022B01003)Ningxia Key Research and Development Program of Foreign Science and Technology Cooperation Projects(202204)the Key Scientific Research Project in Higher Education Institution from the Ningxia Education Department(2022115).
文摘To enhance the aerodynamic performance of wind turbine blades,this study proposes the adoption of a bionic airfoil inspired by the aerodynamic shape of an eagle.Based on the blade element theory,a non-uniform extraction method of blade elements is employed for the optimization design of the considered wind turbine blades.Moreover,Computational Fluid Dynamics(CFD)is used to determine the aerodynamic performances of the eagle airfoil and a NACA2412 airfoil,thereby demonstrating the superior aerodynamic performance of the former.Finally,a mathematical model for optimizing the design of wind turbine blades is introduced and a comparative analysis is conducted with respect to the aerodynamic performances of blades designed using a uniform extraction approach.It is found that the blades designed using non-uniform extraction exhibit better aerodynamic performance.
基金supported in part by the National Natural Science Foundation of China under grants 62202044 and 62372039Scientific and Technological Innovation Foundation of Foshan under grant BK22BF009+3 种基金Excellent Youth Team Project for the Central Universities under grant FRF-EYIT-23-01Fundamental Research Funds for the Central Universities under grants 06500103 and 06500078Guangdong Basic and Applied Basic Research Foundation under grant 2022A1515240044Beijing Natural Science Foundation under grant 4232040.
文摘Timely inspection of defects on the surfaces of wind turbine blades can effectively prevent unpredictable accidents.To this end,this study proposes a semi-supervised object-detection network based on You Only Looking Once version 4(YOLOv4).A semi-supervised structure comprising a generative adversarial network(GAN)was designed to overcome the difficulty in obtaining sufficient samples and sample labeling.In a GAN,the generator is realized by an encoder-decoder network,where the backbone of the encoder is YOLOv4 and the decoder comprises inverse convolutional layers.Partial features from the generator are passed to the defect detection network.Deploying several unlabeled images can significantly improve the generalization and recognition capabilities of defect-detection models.The small-scale object detection capacity of the network can be improved by enhancing essential features in the feature map by adding the concurrent spatial and channel squeeze and excitation(scSE)attention module to the three parts of the YOLOv4 network.A balancing improvement was made to the loss function of YOLOv4 to overcome the imbalance problem of the defective species.The results for both the single-and multi-category defect datasets show that the improved model can make good use of the features of the unlabeled images.The accuracy of wind turbine blade defect detection also has a significant advantage over classical object detection algorithms,including faster R-CNN and DETR.
基金supported by Shanghai Electric Power Energy Technology Co.,Ltd.2023 Science and Technology Project under Grant No.33019006220801.
文摘Time-series anomaly detection plays a crucial role in the operation of offshore wind turbines.Various wind turbine monitoring systems rely on time-series data to monitor and identify anomalies in real-time,as well as to initiate early warning processes.However,for offshore wind turbines with a high data density,conventional methods have high computational overhead in detecting anomalies while failing to accurately detect anomalies due to variations in data scales.To address this challenge,we propose an efficient anomaly detection method with contrastive learning,called Hawkeye.Hawkeye is based on residual clustering,an unsupervised anomaly detection method for multivariate time-series data.To ensure accurate anomaly detection,a trend-capturing prediction module is also combined with an automatic labeling module.As a result,the most common information can be learned from multivariate time-series data to reconstruct data trends.By evaluating Hawkeye on public datasets and real-world offshore wind turbine operational datasets,the results show that Hawkeye’s F_(1)-score improves by an average of 14% compared with Isolation Forest,and its size shrinks by up to 11.5 times on the largest dataset compared with other methods.The proposed Hawkeye is potential to real-time monitoring and early warning systems for wind turbines,accelerating the development of intelligent operation and maintenance.
基金Natural Science Foundation of Liaoning Province(2022-MS-305)Foundation of Liaoning Province Education Administration(LJKZ1108).
文摘The focus of this research was on the equivalent particle roughness height correction required to account for the presence of ice when determining the performances of wind turbines.In particular,two icing processes(frost ice and clear ice)were examined by combining the FENSAP-ICE and FLUENT analysis tools.The ice type on the blade surfaces was predicted by using a multi-time step method.Accordingly,the influence of variations in icing shape and ice surface roughness on the aerodynamic performance of blades during frost ice formation or clear ice formation was investigated.The results indicate that differences in blade surface roughness and heat flux lead to disparities in both ice formation rate and shape between frost ice and clear ice.Clear ice has a greater impact on aerodynamics compared to frost ice,while frost ice is significantly influenced by the roughness of its icy surface.
基金financially supported by the Open Foundation of State Key Laboratory of Hydraulic Engineering Simulation and Safety of Tianjin University(Grant No.HESS-2002)。
文摘As offshore wind farms expand into deeper and farther ocean regions and the unit capacity of offshore wind turbines(OWTs)increases,there is a pressing need for a new foundation structure that can accommodate deep-sea conditions and support large capacities while maintaining economical and safe.To meet this goal of integrated transportation and one-step installation,a novel five-bucket jacket foundation(FBJF),with its suction installation and leveling methods in sand,has been proposed,analyzed and experimentally studied.First,seepage failure experiments of the FBJF at various depths were conducted,and a formula for calculating the critical suction of seepage failure suitable for the FBJF in sand was chosen and recommended for use with a range of values for the permeability coefficient ratio.Second,through leveling experiments of the FBJF at different depths,the maximum adjustable leveling angle during the sinking process was defined using seepage failure and the adjustable leveling angle of the foundation as control criteria.Various leveling control strategies were proposed and verified.Finally,an automatic sinking and leveling control system for the FBJF was developed and experimentally verified for feasibility.
基金financially supported by the National Natural Science Foundation of China(No.52301326)the China Postdoctoral Science Foundation(No.2023M731999)the Open Foundation of the Key Laboratory of Coupling Process and Effect of Natural Resources Elements(No.2024KFKT017).
文摘Local scour around offshore wind turbine foundations presents a considerable challenge due to its potential influence on structural stability,driven by hydrodynamic forces.While research has made strides in comprehending scouring mechanisms,notable complexities persist,specifically with newer foundation types.Addressing these limitations is vital for advancing our understanding of scour mechanisms and for improving mitigation strategies in offshore wind energy development.This review synthesizes current findings on local scour across various offshore foundations,encompassing field observations,data-driven approaches,turbulence-sediment interactions,scour evolution processes,influencing factors,and numerical model advancements.The objective is to enrich our understanding of local scour mechanisms.In addition,future research directions are outlined,including the development of robust arti-ficial intelligence models for accurate predictions,the exploration of vortex structure characteristics,and the refinement of numerical models to strengthen prediction capabilities while minimizing computational efforts.
基金supported by the National Natural Science Foundation Project(Nos.51966018 and 51466015)the Key Research&Development Program of Xinjiang(Grant No.2022B01003).
文摘To study the impact of the trailing-edge wear on the vibrational behavior of wind-turbine blades,unworn blades and trailing-edge worn blades have been assessed through relevant modal tests.According to these experiments,the natural frequencies of trailing-edge worn blades-1,-2,and-3 increase the most in the second to fourth order,thefifth order increases in the middle,and thefirst order increases the least.The damping ratio data indi-cate that,in general,thefirstfive-order damping ratios of trailing-edge worn blades-1 and trailing-edge worn blades-2 are reduced,and thefirstfive-order damping ratios of trailing-edge worn blades-3 are slightly improved.The mode shape diagram shows that the trailing-edge worn blades-1 and-2 have a large swing in the tip and the blade,whereas the second-and third-order vibration shapes of the trailing edge-worn blade-3 tend to be improved.Overall,all these results reveal that the blade’s mass and the wear area are the main fac-tors affecting the vibration characteristics of wind turbine blades.
基金supported by the National Natural Science Foundation of China (52071055)the Fundamental Research Funds for the Central Universities (Grant No.DUT22QN237).
文摘Important challenges must be addressed to make wind turbines sustainable renewable energy sources.A typical problem concerns the design of the foundation.If the pile diameter is larger than that of the jacket platform,traditional mechanical models cannot be used.In this study,relying on the seabed soil data of an offshore wind farm,the m-method and the equivalent embedded method are used to address the single-pile wind turbine foundation problem for different pile diameters.An approach to determine the equivalent pile length is also proposed accordingly.The results provide evidence for the effectiveness and reliability of the model based on the equivalent embedded method.
