期刊文献+
共找到14,438篇文章
< 1 2 250 >
每页显示 20 50 100
Spatial-Temporal Distribution Characteristics and Limiting Factors of Medium-low Yield Farmland in Tianjin
1
作者 潘洁 吕雄杰 +1 位作者 肖辉 陆文龙 《Agricultural Science & Technology》 CAS 2015年第3期578-582,共5页
[Objective] This paper aimed to understand the area change and distribu- tion of medium-low yield farmland, and offered basis to the improvement of mediumlow farmland and its increase of grain production in Tianjin. [... [Objective] This paper aimed to understand the area change and distribu- tion of medium-low yield farmland, and offered basis to the improvement of mediumlow farmland and its increase of grain production in Tianjin. [Method] Based on the statistical date of Tianjin and its relevant counties and districts, the yield standard was set up to classify high-yield, medium-yield and low-yield farmland in Tianjin. The author analyzed area change of medium-low yield farmland in six agricultural counties and districts (including Jixian County, Wuqing District, Baodi District, Ninghe County, Jinghai County and Dagang district of Binghai New Area) from 1980 to 2010. [Result] The results showed that the average yield of grain rose from 2 445 kg/hm^2 in 1980 to 5 130 kg/hm^2 in 2010, increasing 109.82%. The area of mediumlow yield farmland was reduced from 291 250.13 hm^2 in 1985 to 76 489.87 hm^2 in 2010, coming down 74%. In Tianjin, the area of medium-low yield farmland of 2010 accounted for 19% of the total farmland, of which the ratios of medium-low yield farmland of Jinghai County, Jixian County, Dagang district of Binghai New Area, Wuqing District, Baodi District and Ninghe County were 43.12%, 18.59%, 17.23%, 14.01%, 7.05% and 0, respectively. Low soil nutrient content, drought and water shortage, as well as soil salinization were the main yield limiting factors to mediumlow yield farmland in Tianjin in 2010. [Conclusion] The countermeasures to improve the medium-low yield farmland were proposed, involving enhancing the investment of the government, strengthening the construction of water conservancy infrastructure, further improving the soil fertility, as well as saline and alkaline land, optimizing the farming system and planting drought and salt tolerance crops, etc. 展开更多
关键词 Medium-low yield farmland spatial-temporal distribution Limiting factors TIANJIN
在线阅读 下载PDF
A SPATIAL-TEMPORAL DISTRIBUTION CHARACTERISTICS STUDY ON THE ATMOSPHERIC CARBON DIOXIDE OBSERVED BY GOSAT SATELLITE REMOTE SENSING 被引量:4
2
作者 刘瑞霞 张兴赢 +1 位作者 刘杰 刘雅各 《Journal of Tropical Meteorology》 SCIE 2015年第4期408-416,共9页
The variation of the atmospheric Carbon Dioxide (CO2) concentration plays an important role in global cli- mate and agriculture. We analyzed the spatial-temporal characteristics of CO2 in the China region and around... The variation of the atmospheric Carbon Dioxide (CO2) concentration plays an important role in global cli- mate and agriculture. We analyzed the spatial-temporal characteristics of CO2 in the China region and around the globe with the CO2 column mixing ratios observed by the Japanese GOSAT satellite (Greenhouse Gases Observing Satellite). In order to make sure that the accuracy of the CO2 data retrieved by the satellite meets the needs of the climate charac- teristics analyses, we ran a validation on the CO2 column mixing ratios retrieved by the satellite against the ground-based TCCON (Total Carbon Column Observing Network) observation data. The result shows that the two sets of data have a correlation coefficient of higher than 0.7, and a bias of within 2.2 ppmv. Therefore, the GOSAT CO2 da- ta can be used for the climate characteristics analysis of global CO2. Our analysis on the spatial-temporal characteristics of the CO2 column mixing ratios observed during the period of June 2009 through January 2014 proved that, with the impact of the natural emission of near ground CO2 and human activities, the global CO2 concentration has a significant latitudinal characteristics with its highest level averaging 390 oomv in the 0-40?N latitudinal zone in the Northern Hemisphere, and 387 ppmv in the Southern Hemisphere. China has a relatively higher CO2 concentration with the highest level exceeding 398 ppmv, and the eastern area higher than the western area. The variation of global CO2 concentration shows a seasonal pattern, i.e. the CO2 concen- tration reaches its highest in spring in the Northern Hemisphere averaging more than 392 ppmv, second highest in win- ter, and lowest in summer averaging less than 387 ppmv. It fluctuates the most in the Northern Hemisphere with an av- erage concentration of 392.5 ppmv in April, and 385.5 ppmv in July. While in the Southern Hemisphere, the seasonal fluctuation is smaller with the highest concentration occurring in July. Over the recent years, the global CO2 concentra- tion has shown an elevating trend with an average annual increase rate of 1.58 ppmv per year. It is a challenge that the human kind has to face to slow down the increase of the CO2 concentration. 展开更多
关键词 GOSAT CO2 spatial-temporal characteristics VALIDATION
在线阅读 下载PDF
Distribution characteristics of microplastics in surface waters in the western Pacific Ocean
3
作者 Cheng HUO Shoufeng ZHANG +4 位作者 Ling QU Shuaichen JIN Cijia WANG Xiaoting CHU Maowei JU 《Journal of Oceanology and Limnology》 2025年第2期492-501,共10页
Microplastic contamination is considered a major threat to the marine environment.Although microplastic pollution in the Pacific Ocean has been studied,its abundance,distribution,composition,and origin in the western ... Microplastic contamination is considered a major threat to the marine environment.Although microplastic pollution in the Pacific Ocean has been studied,its abundance,distribution,composition,and origin in the western Pacific Ocean remain unclear.Here,we investigated the abundance and distribution characteristics of microplastics in surface waters of the western Pacific Ocean and analyzed their potential sources.Results show that microplastics were widespread in the western Pacific Ocean,with abundance ranging from 0.03 to 2.36 particles/m^(3)(average 0.37±0.47 particles/m^(3)).Fibers/filaments and fragments were the main shapes of microplastics(71.6%)and the most abundant microplastic size class was<1.0 mm(42.4%).Significant differences in microplastic abundance were observed in different regions,with the lowest abundance in the South China Sea(0.03 particles/m^(3))and highest abundance in the seamount area in the western Pacific Ocean(0.58 particles/m^(3)).This study provides baseline data and insights into the fate and transportation of microplastics in the western Pacific region. 展开更多
关键词 microplastic western Pacific surface water distribution characteristic seamount area
在线阅读 下载PDF
Spatial-temporal distribution and fluxes of microplastics in Jiulong River basin
4
作者 Weixu QIAN Huatai LIU +5 位作者 Xiaoya LIU Rui YAO Yue WU Libo WU Dongdong CHENG Xinhong WANG 《Journal of Oceanology and Limnology》 2025年第2期360-371,共12页
Microplastics(MPs)pollution has emerged as a critical global environmental issue,for which rivers serve as key conduits for the transport of MPs from land to ocean.There remained a lack of clarity regarding the charac... Microplastics(MPs)pollution has emerged as a critical global environmental issue,for which rivers serve as key conduits for the transport of MPs from land to ocean.There remained a lack of clarity regarding the characteristics and transport patterns of MPs pollution in diverse environmental media and seasons within a river basin.The Jiulong River basin in Fujian,southeast China was studied as case,whose spatial-temporal distribution,pollution characteristics,and transport dynamics of MPs in both surface water and groundwater were analyzed.Additionally,the features of MPs in different land use types during the dry season were examined.Results show that in wet season,the abundance of MPs in river water varied from 840 to 12300 p/m^(3),with an average of 3920 p/m^(3);in groundwater,the range was 740-1820 p/m^(3),averaging 1107 p/m^(3);and from 68 to 951 p/kg,with an average value of 265 p/kg in the soil(dry weight).In dry season,levels of MPs in river water ranged from 580 to 8880 p/m^(3),with an average of 4034 p/m^(3);groundwater exhibited a range of 860-14980 p/m^(3),averaging 3453 p/m^(3).Fibers consistently dominated the morphology of MPs,of which polyethylene terephthalate was identified as the predominant composition in each environmental medium.Our findings underscore the spatial and temporal variability in distribution and contamination characteristics of MPs across different media.Notably,MPs abundance in river water and groundwater exhibited a seasonal pattern,being higher in levels in dry season than in wet season.The downstream transport of MPs was facilitated by surface runoff,in which MPs in groundwater and surface water could complement to each other.Furthermore,population density and human activities were identified as influential factors on the distribution and abundance of MPs.This study revealed the order of magnitude of difference in annual estimates of MPs entering the sea among different models.Additionally,the interception volume by mangrove forest in the Jiulong River estuary was estimated approximately 1.51×10^(10)MPs particles per year.Ecological interception shall be considered when estimating the fluxes of MPs into the sea. 展开更多
关键词 microplastic(MP) distribution characteristics environmental influencing factors fluxes into the sea Jiulong River
在线阅读 下载PDF
Tree failure modes influenced by the characteristics of tree and its root distribution caused by debris flows
5
作者 CHEN Xiaoqing JIN Ke +3 位作者 WANG Chenyuan LIU Haitao ZHAO Wanyu CHEN Jiangang 《Journal of Mountain Science》 SCIE CSCD 2024年第12期3986-4000,共15页
Forests play an important role in controlling the formation and movement processes of debris flows.They contribute to soil stabilization,regulation of soil water content,and act as robust structures impeding the downs... Forests play an important role in controlling the formation and movement processes of debris flows.They contribute to soil stabilization,regulation of soil water content,and act as robust structures impeding the downstream progression of debris flows.On the positive side,trees,to some extent,can intercept debris flows and effectively mitigate their velocity by increasing flow resistance.On the negative side,trees may suffer damage from debris-flow hazards,characterized by the generation of substantial quantities of wood fragments and consequential ramifications such as river channel blockage,resulting in backwater rise.In extreme cases,this blockage collapse can lead to instantaneous discharge amplification,thereby adversely impacting urban safety and impeding sustainable development.Therefore,in order to grasp the effects of tree characteristics on tree failure modes,the tree failure modes and corresponding parameters,diameters at breast height(DBH)and root-soil plate size,were identified and recorded through the post-event field investigation in Keze Gully,a region prone to debrisflow events in Sichuan,China,respectively.To investigate the impact of spatial variability in tree root distribution on tree failure modes,the root crosssectional area ratio(RAR),root density(RD),root length density(RLD)and soil detachment rate(SDR)were obtained.The findings indicated that:(1)Tree characteristics reflect the interactions of debris flows and trees,and influence the tree failure modes ultimately.The root distribution characteristics influence the size and shape of the root-soil plate to affect the resistance of trees.(2)Compared to burial and abrasion,stem breakage and overturning are the predominant modes of tree failure in debris-flow hazards.Trees with a smaller DBH primarily experience stem breakage and bending,and trees with a larger DBH mostly experience overturning.(3)The root-soil plate shapes of overturned trees,affected by the root architecture and root growth range,are generally semielliptical or semicircular,and the horizontal and vertical radii increase with DBH,but the correlation between the root-soil plate’s breadth-depth ratio and DBH is low.(4)The biomass and RAR decrease with distance.The RAR distribution exhibit the order of upslope direction>downslope direction>lateral direction.The coarse root biomass significantly increases with DBH,but no clear trend in fine root biomass.(5)The roots can significantly enhance the soil erosion resistance,but the erosion resistance of coarse roots is not as significant as that of fine roots.The erosion resistance increases with DBH,and follows the order of upslope direction>downslope direction>lateral direction.The results could provide new insights into the influences of tree and root distribution characteristics on tree failure modes during debris flows. 展开更多
关键词 Debris flows Tree characteristics Root distribution characteristics Tree failure modes Forestation
在线阅读 下载PDF
Study on concentration distribution and detonation characteristics for non-axisymmetric fuel dispersal
6
作者 Linghui Zeng Zhongqi Wang +1 位作者 Xing Chen Jianping Li 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第1期484-495,共12页
The study of non-axisymmetric fuel dispersal and detonation can provide reference for the prevention of industrial cloud explosion accidents and the design of fuel air explosive(FAE).The concentration and detonation f... The study of non-axisymmetric fuel dispersal and detonation can provide reference for the prevention of industrial cloud explosion accidents and the design of fuel air explosive(FAE).The concentration and detonation fields of 85 kg cylindrical and fan-shaped fuel are investigated by experiments and numerical simulations.A dynamic model of the whole process for fuel dispersal and detonation is built.The concentration distribution of fuel is used as the initial condition to calculate the detonation stage,thus solving the initial value problem of detonation field.The phase and component changes of fuel cloud at different locations are compared.The fuel cloud is divided into directions of 0°,90°,135°and 180°.The results show that the maximum cloud radius is 20.94 m in 135°and the minimum is 12.04 m in 0°.The diameter of the detonation fireball is 53.6 m,and the peak temperature is 3455 K.The highest peak overpressure is 3.44 MPa in 0°and the lowest is 2.97 MPa in 135°.The proportion of liquid phase in 0°is22.90%,and the fuel loss is 11.8% and 9% higher than that in 135°and cylindrical charge,respectively.The stable propagation distance of blast wave in 135°is 42.50% longer than 0°and 28.37% longer than cylindrical charge. 展开更多
关键词 Fuel dispersal Concentration distribution Detonation characteristic Fuel loss Numerical simulation
在线阅读 下载PDF
Characteristics and distribution of microstructures in high pressure die cast alloys with X-ray microtomography:A review
7
作者 Hai-dong Zhao Xue-ling Wang +2 位作者 Qian Wan Wen-hui Bai Fei Liu 《China Foundry》 SCIE EI CAS CSCD 2024年第5期427-444,共18页
Al and Mg alloy high pressure die castings(HPDC)are increasingly used in automotive industries.The microstructures in the castings have decisive effect on the casting mechanical properties,in which the microstructure ... Al and Mg alloy high pressure die castings(HPDC)are increasingly used in automotive industries.The microstructures in the castings have decisive effect on the casting mechanical properties,in which the microstructure characteristics are fundamental for the investigation of the microstructure-property relation.During the past decade,the microstructure characteristics of HPDC Al and Mg alloys,especially micro-pores andα-Fe,have been investigated from two-dimensional(2D)to threedimensional with X-ray micro-computed tomography(μ-CT).This paper provides an overview of the current understanding regarding the 3D characteristics and formation mechanisms of microstructures in HPDC alloys,their spatial distributions,and the impact on mechanical properties.Additionally,it outlines future research directions for the formation and control of heterogeneous microstructures in HPDC alloys. 展开更多
关键词 high pressure die casting microstructure three-dimensional characteristics distribution Al and Mg alloys
在线阅读 下载PDF
Effect of droplet characteristics on liquid-phase distribution in spray zone of internal mixing air-mist nozzle
8
作者 Wei-li Wu Chang-gui Cheng +2 位作者 Yang Li Shi-fa Wei De-li Chen 《China Foundry》 SCIE EI CAS CSCD 2024年第2期185-196,共12页
In continuous casting production,droplet characteristics are important parameters for evaluating the nozzle atomization quality,and have a significant impact on the secondary cooling effect and the slab quality.In ord... In continuous casting production,droplet characteristics are important parameters for evaluating the nozzle atomization quality,and have a significant impact on the secondary cooling effect and the slab quality.In order to study the behavior of atomized droplets after reaching the slab surface and to optimize the spray cooling effect,the influence of droplet diameter and droplet velocity on the migration behavior of droplets in the secondary cooling zone was analyzed by FLUENT software.Results show that the droplets in the spray zone and on the slab surface are mainly concentrated in the center,thus,the liquid volume fraction in the center is higher than that of either side.As the droplet diameter increases,the region of high liquid volume fraction on the slab surface becomes wider,and the liquid phase distribution in the slab width direction becomes uneven.Although increasing the droplet velocity at the nozzle exit has little effect on droplet diffusion in the spray zone,the distribution becomes more uneven due to more liquid reaches the slab surface per unit time.A prediction formula of the maximum water flow rate on the slab surface for specific droplet characteristics was proposed based on dimensionless analysis and validated by simulated data.A nozzle spacing of 210 mm was recommended under the working conditions in this study,which ensures effective coverage of the spray water over the slab surface and enhances the distribution uniformity of water flow rate in the transverse direction. 展开更多
关键词 continuous casting secondary cooling zone internal mixing air-mist nozzle droplet characteristics liquid phase distribution water flow rate
在线阅读 下载PDF
Spatial-temporal distribution and geochemistry of highly evolved Mesozoic granites in Great Xing’an Range,NE China:Discriminant criteria and geological significance
9
作者 WU Haoran YANG Hao +4 位作者 GE Wenchun JI Zheng DONG Yu JING Yan JING Jiahao 《Global Geology》 2024年第1期20-34,共15页
Highly evolved granite is an important sign of the mature continent crust and closely associated with deposits of rare metals.In this work,the authors undertake systematically zircon U-Pb ages and whole rock elemental... Highly evolved granite is an important sign of the mature continent crust and closely associated with deposits of rare metals.In this work,the authors undertake systematically zircon U-Pb ages and whole rock elemental data for highly evolved granitic intrusions from the Great Xing’an Range(GXR),NE China,to elucidate their discriminant criteria,spatial-temporal distribution,differentiation and geodynamic mecha-nism.Geochemical data of these highly evolved granites suggest that high w(SiO_(2))(>70%)and differentiation index(DI>88)could be quantified indicators,while strong Eu depletion,high TE_(1,3),lowΣREE and low Zr/Hf,Nb/Ta,K/Rb could only be qualitative indicators.Zircon U-Pb ages suggest that the highly evolved gran-ites in the GXR were mainly formed in Late Mesozoic,which can be divided into two major stages:Late Ju-rassic-early Early Cretaceous(162-136 Ma,peak at 138 Ma),and late Early Cretaceous(136-106 Ma,peak at 126 Ma).The highly evolved granites are mainly distributed in the central-southern GXR,and display a weakly trend of getting younger from northwest to southeast,meanwhile indicating the metallogenic potential of rare metals within the central GXR.The spatial-temporal distribution,combined with regional geological data,indicates the highly evolved Mesozoic granites in the GXR were emplaced in an extensional environ-ment,of which the Late Jurassic-early Early Cretaceous extension was related to the closure of the Mongol-Okhotsk Ocean and roll-back of the Paleo-Pacific Plate,while the late Early Cretaceous extension was mainly related to the roll-back of the Paleo-Pacific Plate. 展开更多
关键词 highly evolved granite Great Xing’an Range spatial-temporal distribution extensional environment
在线阅读 下载PDF
Spatial and Temporal Distribution Characteristics of Snowstorm in Ulanqab City in Recent 30 Years
10
作者 Jie CHEN Jinhua LIU 《Meteorological and Environmental Research》 2024年第4期11-14,共4页
Based on the data of daily snowfall and weather phenomena of 11 national meteorological stations in Ulanqab City from 1991 to 2020,the spatial and temporal distribution characteristics of snowstorm were analyzed.The r... Based on the data of daily snowfall and weather phenomena of 11 national meteorological stations in Ulanqab City from 1991 to 2020,the spatial and temporal distribution characteristics of snowstorm were analyzed.The results show that the snowstorm in Ulanqab had obvious seasonal distribution characteristics,mainly happening in spring(March-May)and autumn(September-November).It also had obvious regional distribution in space,and the snowstorm center appeared in Chahar Right Wing Middle Banner and Jining District,namely the east side of the Yinshan Mountain.In the past 30 years,the amount of snowstorm in the whole year in Ulanqab showed a certain fluctuation trend,and the number of snowstorm days had shown an obvious upward trend since 2011. 展开更多
关键词 Ulanqab City SNOWSTORM Spatial and temporal distribution characteristics
在线阅读 下载PDF
Spatial-temporal Evolvement Characteristics of Climate Productivity for the Plants on Inner Mongolia Desert Steppe 被引量:5
11
作者 韩芳 苗百岭 +3 位作者 郭瑞清 李兴华 那日苏 王海 《Meteorological and Environmental Research》 CAS 2010年第5期76-79,共4页
Thornthwaite Memorial model and other statistic methods were used to calculate the climate-productivity of plants with the meteorological data from 1961 to 2007 at 9 stations distributed on Inner Mongolia desert stepp... Thornthwaite Memorial model and other statistic methods were used to calculate the climate-productivity of plants with the meteorological data from 1961 to 2007 at 9 stations distributed on Inner Mongolia desert steppe.The spatial and temporal variation characteristics of climate-productivity were analyzed by using the methods of the tendency rate of the climate trend,accumulative anomaly,and spatial difference and so on.The results showed that the climate-productivity kept linear increased trend over Inner Mongolia desert steppe in recent 47 years,but not significant.In spatial distribution,the climate-productivity reduced with the increased latitude.The climate-productivity in southwest part of Inner Mongolia desert steppe was growing while that in the southeast was reducing.The variation rate of the climate-productivity increased from the northwest part to the southeast part of Inner Mongolia desert steppe.In recent 47 years,the climate-productivity in southeast Jurh underwent the greatest decreasing extent,and the region was the sensitive area of the climate-productivity variation. 展开更多
关键词 Desert steppe Climate productivity spatial-temporal distribution Variation rate China
在线阅读 下载PDF
Studies on Distribution and Chemical Characteristics of Copper in Cells of Setcreasea purpurea Boom 被引量:2
12
作者 黄长干 付凌 +2 位作者 梁英 魏国清 邱业先 《Agricultural Science & Technology》 CAS 2008年第5期81-87,共7页
[Objective] The aim of this study was to reveal the mechanism of Cu2+ hyper-accumulator in Setcreasea purpurea Boom from the angle of distribution characteristics and binding form of Cu2+ in tissue cells.[Method]The d... [Objective] The aim of this study was to reveal the mechanism of Cu2+ hyper-accumulator in Setcreasea purpurea Boom from the angle of distribution characteristics and binding form of Cu2+ in tissue cells.[Method]The distribution characteristics of Cu2+ in subcells of Setcreasea purpurea Boom was studied by the technique of differential centrifugation,and the binding form of Cu2+ in roots and leaves of Setcreasea purpurea Boom was also investigated by the sequential chemical extraction method and the enzymolysis method.[Result]Cu2+ in roots mainly distributed in the cell wall which is accounting for one third of the Total Cu2+ in roots,while Cu2+ in leaves mainly distributed in the chloroplast which is accounting for a quarter to the Total Cu2+ in leaves.Under the high concentration of Cu2+ or the extended treatment duration,the translocation of Cu2+ in root cells into the cell wall increased but the translocation of Cu2+ in root cells into the plastid decreased,while the translocation of Cu2+ in leaf cells into the chloroplast increased but the translocation of Cu2+ in leaf cells into the cell wall decreased.Cu2+ in leaves was mainly combined with amino acid,small molecular polymeric pigments,protein and polysaccharide,while Cu2+ in roots was mainly combined with cell wall substances such as cellulose and membrane-bound protein.[Conclusion]The distribution characteristics and binding form of Cu2+ in cells is possibly one of the dominant mechanisms for Cu2+ hyper-accumulator in Setcreasea purpurea Boom. 展开更多
关键词 CU2+ Setcreasea PURPUREA BOOM distribution characteristIC
在线阅读 下载PDF
Study on Distribution Characteristics of Lightning Disasters in Hebei Province 被引量:3
13
作者 王建恒 杨仲江 吴孟恒 《Meteorological and Environmental Research》 CAS 2010年第7期105-108,共4页
Based on the special landscape and regional characteristics,the lightning location information from 1999 to 2008 and conventional observation data from 1971 to 2000 provided by electricity departments in Hebei Provinc... Based on the special landscape and regional characteristics,the lightning location information from 1999 to 2008 and conventional observation data from 1971 to 2000 provided by electricity departments in Hebei Province were applied to analyze spatial and temporal distribution of lightning.With lighting disaster data since 2000 provided by meteorological department,and records from civil affair,statistics,insurance,and other departments,the lighting disaster distribution of Hebei Province was studied from aspects of economic and people losses,and some countermeasures for several lightning disasters industries were put forward. 展开更多
关键词 Lightning disasters distribution characteristics RESEARCH China
在线阅读 下载PDF
Distribution Characteristics of COD in the Waters of Pearl River Estuary 被引量:2
14
作者 杨美兰 林钦 +7 位作者 黄洪辉 甘居利 蔡文贵 吕晓瑜 王增焕 李纯厚 杜飞雁 胡德蓉 《Marine Science Bulletin》 CAS 2006年第1期68-74,共7页
The surveys on the COD in the Lingdingyang waters of Pearl River estuary were carried out in May and August of 2002. The results showed that the concentrations of COD in the waters ranged from 0,41 to 2.72 mg·L^-... The surveys on the COD in the Lingdingyang waters of Pearl River estuary were carried out in May and August of 2002. The results showed that the concentrations of COD in the waters ranged from 0,41 to 2.72 mg·L^-1 with an average of 1.21 mg·L^-1.The spatial distributions showed that COD concentration decreased gradually from the north to south of Pearl River estuary, and the concentration near coastal waters was higher than that in offshore waters. The concentration of COD in summer was higher than in spring. Evaluated by the first class (COD ≤ 2 mg·L^-1) of sea water quality standard (Chinese standard), there were about 15 % of COD concentrations over the standard. The concentration of COD showed a positive correlation with the concentration of suspend substances in spring and summer, but in summer it showed a negative correlation with the concentrations of inorganic nitrate and phosphate. 展开更多
关键词 COD Pearl River estuary distribution characteristics
在线阅读 下载PDF
Quantitative Study on Characteristics of the Weibull Distribution 被引量:4
15
作者 张铁岭 郑慕侨 张祖明 《Journal of Beijing Institute of Technology》 EI CAS 1999年第4期357-363,共7页
Aim To quantitatively study three characteristics of the Weibull distribution. Methods Theoritical analysis of the three characteristics of parameters of the Weibull distribution was done and mathematics software wa... Aim To quantitatively study three characteristics of the Weibull distribution. Methods Theoritical analysis of the three characteristics of parameters of the Weibull distribution was done and mathematics software was used to make some chart analysis. Results 17 equations and 7 figures were made. Conclusion Under the standard form, the class of the Weibull probable density founction(pdf) curves appear double peak shape. Under the standard form, the maximum value point curve of the Weibull pdf takes line t =0 and t=1 as asymptotes. When β = 3 30-3 40, the Weibull distribution is the most similar to the normal distribution. 展开更多
关键词 characteristics of Weibull distributions quasi zero points probable density founction(pdf)
在线阅读 下载PDF
Distribution characteristics of historical earthquake classes in Jiangsu Province and South Huanghai Sea region 被引量:16
16
作者 田建明 徐徐 +2 位作者 谢华章 杨云 丁政 《地震学报》 CSCD 北大核心 2004年第4期432-439,共8页
According to the analysis on the characteristics of historic earthquakes in Jiangsu Province and South Huanghai Sea region, the historical earthquakes in the studied area are divided into two kinds of comparatively sa... According to the analysis on the characteristics of historic earthquakes in Jiangsu Province and South Huanghai Sea region, the historical earthquakes in the studied area are divided into two kinds of comparatively safe class and comparatively dangerous class. Then the statistical result of earthquake class, the characteristics of geo-graphical distribution and geological structures are studied. The study shows: a) In Jiangsu Province and South Huanghai Sea region, the majority of historical strong earthquakes belong to comparatively safe class, only 13.8% belong to comparatively dangerous class; b) Most historical earthquakes belong to comparatively safe class in the land area of Jiangsu, eastern sea area of Yangtze River mouth and northern depression of South Huanghai Sea region. However, along the coast of middle Jiangsu Province and in the sea area of South Huanghai Sea, the distribution of historical earthquake classes is complex and the earthquake series of comparatively dan-gerous class and comparatively safe class are equivalent in number; c) In the studied area, the statistical results of historical earthquake classes and the characteristics of spatial distribution accord very well with the real case of present-day earthquake series. It shows that the seismic activity in the region has the characteristic of succession, and the result from this study can be used as a reference for early postseismic judgment in the earthquake emer-gency work in Jiangsu Province. 展开更多
关键词 历史地震 分类原则 分布特征 江苏及南黄海
在线阅读 下载PDF
Numerical Simulation of Flow and Temperature Distribution in a Bottom-Blown Copper Bath
17
作者 Teng Xia Xiaohui Zhang +4 位作者 Ding Ma Zhi Yang Xinting Tong Yutang Zhao Hua Wang 《Fluid Dynamics & Materials Processing》 2025年第1期121-140,共20页
Smelting with oxygen bottom blowing is one of the main methods used in the frame of copper pyrometallurgy.With this approach,feed materials and oxygen-enriched air are introduced in reversed order to enhance multiphas... Smelting with oxygen bottom blowing is one of the main methods used in the frame of copper pyrometallurgy.With this approach,feed materials and oxygen-enriched air are introduced in reversed order to enhance multiphaseflow within the furnace.Understanding the flow structure and temperature distribution in this setup is crucial foroptimizing production.In this study,gas-liquid interactions,and temperature profiles under varying air-injectionconditions are examined by means of numerical simulation for a 3.2 m×20 m furnace.The results indicate that thehigh-velocity regions are essentially distributed near the lance within the reaction region and the flue gas outlet,while low-velocity regions are located close to the furnace walls on both side of the reaction region.Dead regionsappear in the sedimentation region,with gas velocities surpassing those of the molten phase.As the injection rateincreases from 0.50 to 0.80 Nm3/s,the stabilization time of the average liquid surface velocity decreases from 2.6 sto 1.9 s,exhibiting a similar trend to the gas holdup.During stabilization,the average liquid surface velocity risesfrom 0.505 to 0.702 m/s.The average turbulent kinetic energy(TKE)of the fluid in the molten bath increases from0.095 to 0.162 m^(2)/s^(2).The proportion of the area distribution with TKE greater than 0.10 m^(2)/s^(2) and the gas holdupat steady state both rise with an increase in the injection quantity.The maximum splashing height of the melt growsfrom approximately 0.756 to 1.154 m,with the affected area expanding from 14.239 to 20.498 m^(2).Under differentworking conditions with varying injection quantities,the average temperature changes in melt zone and flue gaszone of the furnace are small.The temperature in the melt and in the flue-gas zone spans the interval 1200℃–1257℃,and 1073℃–1121℃,respectively.The temperature distribution of the melt and flue gas reveals a patterncharacterized by elevated temperatures in the reaction zone,gradually transitioning to lower temperatures in thesedimentation region. 展开更多
关键词 Copper smelting bottom-blown melting furnace flow characteristics temperature distribution numerical simulation
在线阅读 下载PDF
Research on Spatial-Temporal Characteristics and Driving Factor of Agricultural Carbon Emissions in China 被引量:49
18
作者 TIAN Yun ZHANG Jun-biao HE Ya-ya 《Journal of Integrative Agriculture》 SCIE CAS CSCD 2014年第6期1393-1403,共11页
Macroscopic grasp of agricultural carbon emissions status, spatial-temporal characteristics as well as driving factors are the basic premise in further research on China’s agricultural carbon emissions. Based on 23 k... Macroscopic grasp of agricultural carbon emissions status, spatial-temporal characteristics as well as driving factors are the basic premise in further research on China’s agricultural carbon emissions. Based on 23 kinds of major carbon emission sources including agricultural materials inputs, paddy ifeld, soil and livestock breeding, this paper ifrstly calculated agricultural carbon emissions from 1995 to 2010, as well as 31 provinces and cities in 2010 in China. We then made a decomposed analysis to the driving factors of carbon emissions with logarithmic mean Divisia index (LMDI) model. The results show:(1) The amount of agricultural carbon emissions is 291.1691 million t in 2010. Compared with 249.5239 million t in 1995, it increased by 16.69%, in which, agricultural materials inputs, paddy ifeld, soil, enteric fermentation, and manure management accounted for 33.59, 22.03, 7.46, 17.53 and 19.39%of total agricultural carbon emissions, respectively. Although the amount exist ups and downs, it shows an overall trend of cyclical rise; (2) There is an obvious difference among regions:the amount of agricultural carbon emissions from top ten zones account for 56.68%, while 9.84%from last 10 zones. The traditional agricultural provinces, especially the major crop production areas are the main source regions. Based on the differences of carbon emission rations, 31 provinces and cities are divided into ifve types, namely agricultural materials dominant type, paddy ifeld dominant type, enteric fermentation dominant type, composite factors dominant type and balanced type. The agricultural carbon emissions intensity in west of China is the highest, followed by the central region, and the east zone is the lowest; (3) Compared with 1995, efifciency, labor and structure factors cut down carbon emissions by 65.78, 27.51 and 3.19%, respectively;while economy factor increase carbon emissions by 113.16%. 展开更多
关键词 China agricultural carbon emissions spatial-temporal characteristics driving factor LMDI model
在线阅读 下载PDF
Study on Effects of Calcium on Photosynthetic Characteristics and Its Subcellular Distribution in Rice at Seeding Stage 被引量:1
19
作者 朱国奇 张玉烛 +2 位作者 张岳平 曾翔 张兴怀 《Agricultural Science & Technology》 CAS 2015年第8期1603-1609,1685,共8页
Using the cultivars with high and low calcium in brown rice as tested ma- terials, the effects of calcium on photosynthetic characteristics and its subcellular dis- tribution in different rice cultivars at seedling st... Using the cultivars with high and low calcium in brown rice as tested ma- terials, the effects of calcium on photosynthetic characteristics and its subcellular dis- tribution in different rice cultivars at seedling stage were investigated with hydrocul- ture method. The results showed that the photosynthetic rate in leaves of high cal- cium cultivar was higher than that low calcium cultivar. The calcium content in leaves of rice was higher than that in roots. Among various tissues and organs, the calcium contents ranked as cell wall〉ribosome and intracellular soluble components〉 plastid (or chloroplasts)〉mitochondria〉nucleus. Cell wall is the most important distri- bution place for calcium, while calcium is rarely distributed in nuclei or mitochon- drias. In all the organelles, the calcium concentrations were all increased with the increased treatment concentration of calcium, especially in high calcium cultivar. The high calcium treatment showed more significant effects on calcium contents in im- portant organelles of high calcium cultivar, so it is speculated that the high calcium cultivar had higher calcium accumulation and tolerance capacities. 展开更多
关键词 RICE CALCIUM Photosynthetic characteristics Subcellular distribution
在线阅读 下载PDF
Distribution characteristics of dissolved organic carbon in annular wetland soil-water solutions through soil profiles in the Sanjiang Plain,Northeast China 被引量:15
20
作者 XI Min LU Xian-guo +1 位作者 LI Yue KONG Fan-long 《Journal of Environmental Sciences》 SCIE EI CAS CSCD 2007年第9期1074-1078,共5页
Overwhelming evidence reveals that concentrations of dissolved organic carbon (DOC) have increased in streams which brings negative environmental impacts. DOC in stream flow is mainly originated from soil-water solu... Overwhelming evidence reveals that concentrations of dissolved organic carbon (DOC) have increased in streams which brings negative environmental impacts. DOC in stream flow is mainly originated from soil-water solutions of watershed. Wetlands prove to be the most sensitive areas as an important DOC reserve between terrestrial and fluvial biogeosystems. This reported study was focused on the distribution characteristics and the controlling factors of DOC in soil-water solutions of annular wetland, i.e., a dishing wetland and a forest wetland together, in the Sanjiang Plain, Northeast China. The results indicate that DOC concentrations in soilwater solutions decreased and then increased with increasing soil depth in the annular wetland. In the upper soil layers of 0-10 cm and 10-20 cm, DOC concentrations in soil-water solutions linearly increased from edge to center of the annular wetland (R^2 = 0.3122 and R^2 = 0.443). The distribution variations were intimately linked to DOC production and utilization and DOC transport processes in annular wetland soil-water solutions. The concentrations of total organic carbon (TOC), total carbon (TC) and Fe(II), DOC mobility and continuous vertical and lateral flow affectext the distribution variations of DOC in soil-water solutions. The correlation coefficients between DOC concentrations and TOC, TC and Fe(II) were 0.974, 0.813 and 0.753 respectively. These distribution characteristics suggested a systematic response of the distribution variations of DOC in annular wetland soil-water solutions to the geometry of closed depressions on a scale of small catchments. However, the DOC in soil pore water of the annular wetland may be the potential source of DOC to stream flow on watershed scale. These observations also implied the fragmentation of wetland landscape could bring the spatial-temporal variations of DOC distribution and exports, which would bring negative environmental impacts in watersheds of the Sanjiang Plain. 展开更多
关键词 dissolved organic carbon (DOC) distribution characteristics annular wetland soil-water solutions Sanjiang Plain
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部