To address the increasing demand for massive data storage and processing,brain-inspired neuromorphic comput-ing systems based on artificial synaptic devices have been actively developed in recent years.Among the vario...To address the increasing demand for massive data storage and processing,brain-inspired neuromorphic comput-ing systems based on artificial synaptic devices have been actively developed in recent years.Among the various materials inves-tigated for the fabrication of synaptic devices,silicon carbide(SiC)has emerged as a preferred choices due to its high electron mobility,superior thermal conductivity,and excellent thermal stability,which exhibits promising potential for neuromorphic applications in harsh environments.In this review,the recent progress in SiC-based synaptic devices is summarized.Firstly,an in-depth discussion is conducted regarding the categories,working mechanisms,and structural designs of these devices.Subse-quently,several application scenarios for SiC-based synaptic devices are presented.Finally,a few perspectives and directions for their future development are outlined.展开更多
Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the...Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically calculated.The effect of precipitate ripening on the Goss texture and magnetic property was investigated.Data indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate increased.Secondary recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}<227>oriented grains growing abnormally and a magnetic induction intensity of 1.90T.Furthermore,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss texture.However,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 T.At a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this study.The heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.展开更多
【Objectives】Si and microbial application could relieve the crop replanting problems(CRPs).We further studied the change of key microorganisms that are related to the beneficial effects,aiming at provide reference fo...【Objectives】Si and microbial application could relieve the crop replanting problems(CRPs).We further studied the change of key microorganisms that are related to the beneficial effects,aiming at provide reference for the manufacture and application of both microbial agents and Si fertilizer in food lily production.【Methods】A field experiment was conducted over a three-year period,from March 2019 to March 2022.The experimental field had been continuously cultivated with lily for 9 years.Three treatments were established:silicon fertilizer(SF),microbial agents(“Special 8^(TM)”,MF),and combined application of silicon fertilizer and microbial agents(SMF).A control group with blank soil(CK)was also included.At seedling stage of Lanzhou lilies in 2020 and 2021,the shoot and bulb dry weight,and the plant height and stem diameter of Lanzhou lilies were investigated for calculation of seedling index.In July 2020,20 plants were selected in each plot,and root zone soils were sampled at a depth of 20 cm,10 cm away from the roots,and then mixed to form a composite sample.The soil available Si and organic matter content were analyzed,and the fungal community structure and some specific microbial groups in soils were determined with high-throughput sequencing of ITS.【Results】All the three treatments significantly enhanced the lily plant growth and the seedling index,compared to CK.Besides,SF and MF treatments increased the relative abundances(RA)and diversity of fungal communities,and altered the community structures.The RA of some specific groups were found to be significantly correlated with the seedling index and/or soil available Si.Of them,the RA of the genera Fusarium,Dactylonectria,Humicola,Stilbella,and the species Humicola_grisea showed a positive correlation,while that of the genera Mortierella,Stilbella,Holtermanniella,and the species Mortierella_fatshederae showed a negative correlation with seedling index.The genera Fusarium,Stilbella,the species Humicola_grisea,and Dactylonectria_estremocensis showed a positive correlation,while the genura Stilbella,and the species Mortierella fatshederae showed a negative correlation with available Si content.In the co-occurence network of top twenty fungal genera and top sixteen bacterial genera(RA>0.2%),Holtermanniella was the only genus that interacted with the bacteria and negatively correlated with bacterial genus Blastococcus.Holtermanniella was also the most densely connected genera,followed by the genus Fusarium,Didymella and Humicola.In addition,the genus Holtermanniella was the key species connecting fungal and bacterial community in soil.Fungal functional prediction revealed that SF,MF and SMF treatments decreased plant pathogens guilds and increased the beneficial guilds Ectomycorrhizal,plant saprophyte,leaf saprophyte,and arbuscular mycorrhizal compared to CK.【Conclusions】Combined application of silicon fertilizer and microbial agents can alleviate continuous replanting problems of Lanzhou lilies through restoring the fungal community diversity,and promoting plant residue depredation,thus reducing soil born disease incidence.The beneficial genus Humicola and its one species H.grisea acts as bioconversion,and the genus Acremonium acts as plant pathogen inhibitor.展开更多
The production processes for Si and FeSi have traditionally been considered slag-free.However,recent excavations have revealed significant accumulation of CaO–SiO_(2)–Al_(2)O_(3)slag within the furnaces.This accumul...The production processes for Si and FeSi have traditionally been considered slag-free.However,recent excavations have revealed significant accumulation of CaO–SiO_(2)–Al_(2)O_(3)slag within the furnaces.This accumulation can obstruct the flow of materials and gases,resulting in lower metal yield and higher energy consumption.The main objective of the current work is to enhance our understanding of slag formation during Si and FeSi production.We investigate slag formation through the dissolution of limestone and iron oxide in quartz and condensate,focusing on the reactions between these materials at a gram scale.Our findings indicate that most slag reaches equilibrium relatively quickly at temperatures starting from 1673 K.Notably,slag formation starts at lower temperature when the iron source is present (1573 K) compared to when only CaO is involved (1673 K).The minor elements tend to accumulate at quartz grain boundaries prior to slag formation.Furthermore,the slag produced from condensate contains less SiO_(2)than that generated from quartz with limestone.The type of quartz source and SiO_(2)phase appears to have little influence on slag formation.Good wettability is a significant factor in reaction between quartz and slag.FactSage calculations indicates that the viscosity of the slag ranges from 0.02 to 14.4 Pa·s under furnace conditions,comparable to the viscosity of honey or motor oil at room temperature.展开更多
Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes...Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes during repeated charge–discharge cycles. In this work, a “soft-hard”double-layer coating has been proposed and carried out on ball-milled silicon particles. It is composed of inside conductive pathway and outside elastic coating, which is achieved by decomposing a conductive graphite layer on the silicon surface and further coating it with a polymer layer.The incorporation of the second elastic coating on the inside carbon coating enables silicon particles strongly interacted with binders, thereby making the electrodes displaying an obviously improved cycling stability. As-obtained double-coated silicon anodes deliver a reversible capacity of 2280 m Ah g^(-1)at the voltage of 0.05–2 V, and maintains over 1763 mAh g^(-1)after 50 cycles. The double-layer coating does not crack after the repeated cycling, critical for the robust performance of the electrodes. In addition, as-obtained silicon particles are mixed with commercial graphite to make actual anodes for lithium-ion batteries. A capacity of 714 mAh g^(-1)has been achieved based on the total mass of the electrodes containing 10 wt.% double-coated silicon particles. Compared with traditional carbon coating or polymeric coating, the double-coating electrodes display a much better performance. Therefore, the double-coating strategy can give inspiration for better design and synthesis of silicon anodes, as well as other battery materials.展开更多
Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability an...Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability and short service life.To address these issues,low-phenyl silicone rubber was prepared and tested,and the finite element analysis and experimental studies on the sealing performance of its sealing rings were carried out.Design/methodology/approach–The low-temperature resistance and thermal stability of the prepared lowphenyl silicone rubber were studied using low-temperature tensile testing,differential scanning calorimetry,dynamic thermomechanical analysis and thermogravimetric analysis.The sealing performance of the lowphenyl silicone rubber sealing ring was studied by using finite element analysis software abaqus and experiments.Findings–The prepared low-phenyl silicone rubber sealing ring possessed excellent low-temperature resistance and thermal stability.According to the finite element analysis results,the finish of the flange sealing surface and groove outer edge should be ensured,and extrusion damage should be avoided.The sealing rings were more susceptible to damage in high compression ratio and/or low-temperature environments.When the sealing effect was ensured,a small compression ratio should be selected,and rubbers with hardness and elasticity less affected by temperature should be selected.The prepared low-phenyl silicone rubber sealing ring had zero leakage at both room temperature(RT)and�508C.Originality/value–The innovation of this study is that it provides valuable data and experience for the future development of the sealing rings used in the brake pipe flange joints of the railway freight cars in China.展开更多
Micrometer-sized silicon oxide(SiO)anodes encounter challenges in large-scale applications due to significant volume expansion during the alloy/de-alloy process.Herein,an innovative deep eutectic electrolyte derived f...Micrometer-sized silicon oxide(SiO)anodes encounter challenges in large-scale applications due to significant volume expansion during the alloy/de-alloy process.Herein,an innovative deep eutectic electrolyte derived from succinonitrile is introduced to enhance the cycling stability of SiO anodes.Density functional theory calculations validate a robust ion-dipole interaction between lithium ions(Li^(+))and succinonitrile(SN).The cosolvent fluoroethylene carbonate(FEC)optimizes the Li^(+)solvation structure in the SN-based electrolyte with its weakly solvating ability.Molecular dynamics simulations investigate the regulating mechanism of ion-dipole and cation-anion interaction.The unique Li^(+)solvation structure,enriched with FEC and TFSI^(-),facilitates the formation of an inorganic-organic composite solid electrolyte interphase on SiO anodes.Micro-CT further detects the inhibiting effect on the SiO volume expansion.As a result,the SiO|LiCoO_(2) full cells exhibit excellent electrochemical performance in deep eutectic-based electrolytes.This work presents an effective strategy for extending the cycle life of SiO anodes by designing a new SN-based deep eutectic electrolyte.展开更多
Converting CO_(2)and water into valuable chemicals like plant do is considered a promising approach to address both environmental and energy issues.Taking inspiration from the structures of natural leaves,we designed ...Converting CO_(2)and water into valuable chemicals like plant do is considered a promising approach to address both environmental and energy issues.Taking inspiration from the structures of natural leaves,we designed and synthesized a novel copper-coordinated covalent triazine framework(CuCTF)supported by silicon nanowire arrays on wafer chip.This marks the first-ever application of such a hybrid material in the photoelectrocatalytic reduction of CO_(2)under mild conditions.The Si@CuCTF6 heterojunction has exhibited exceptional selectivity of 95.6%towards multicarbon products(C_(2+))and apparent quantum efficiency(AQE)of 0.89%for carbon-based products.The active sites of the catalysts are derived from the nitrogen atoms of unique triazine ring structure in the ordered porous framework and the abundant Cu-N coordination sites with bipyridine units.Furthermore,through DFT calculations and operando FTIR spectra analysis,we proposed a comprehensive mechanism for the photoelectrocatalytic CO_(2)reduction,confirming the existence of key intermediate species such as*CO_(2)-,*=C=O,*CHO and*CO-CHO etc.This work not only provides a new way to mimic photosynthesis of plant leaves but also gives a new opportunity to enter this research field in the future.展开更多
Despite significant advancements in the power conversion efficiency(PCE)of perovskite/silicon tandem solar cells,improving carrier management in top cells remains challenging due to the defective dual interfaces of wi...Despite significant advancements in the power conversion efficiency(PCE)of perovskite/silicon tandem solar cells,improving carrier management in top cells remains challenging due to the defective dual interfaces of wide-bandgap perovskite,particularly on textured silicon surfaces.Herein,a series of halide ions(Cl^(-),Br^(-),I^(-))substituted piperazinium salts are designed and synthesized as post-treatment modifiers for perovskite surfaces.Notably,piperazinium chloride induces an asymmetric bidirectional ions distribution from the top to the bottom surface,with large piperazinium cations concentrating at the perovskite surface and small chloride anions migrating downward to accumulate at the buried interface.This results in effective dual-interface defect passivation and energy band modulation,enabling wide-bandgap(1.68 eV)perovskite solar cells to achieve a PCE of 22.3%and a record product of open-circuit voltage×fill factor(84.4%relative to the Shockley-Queisser limit).Furthermore,the device retains 91.3%of its initial efficiency after 1200 h of maximum power point tracking without encapsulation.When integrated with double-textured silicon heterojunction solar cells,a remarkable PCE of 31.5%is achieved for a 1.04 cm^(2) monolithic perovskite/silicon tandem solar cell,exhibiting excellent long-term operational stability(T_(80)=755 h)without encapsulation in ambient air.This work provides a convenient strategy on dual-interface engineering for making high-efficiency and stable perovskite platforms.展开更多
We focus on a novel and economical route for the synthesis of Si fertilizer via the calcination method using lithium pyroxene acid-leaching residues as the starting materials.The molar ratio of Si/K/Ca of 1:1.4:0.8,ca...We focus on a novel and economical route for the synthesis of Si fertilizer via the calcination method using lithium pyroxene acid-leaching residues as the starting materials.The molar ratio of Si/K/Ca of 1:1.4:0.8,calcination temperature of 900℃and calcination time of 120 min were identified as the optimal conditions to maximize the available Si content of the prepared Si fertilizer.The performance of the resulting product satisfies the Chinese agricultural standard for silica fertilizers,providing a new solution for the large-scale harmless and sustainable reuse of lithium pyroxene tailings.The X-ray diffraction(XRD)and Fourier transform infrared spectroscopy(FTIR)characterization elucidated the formation mechanism of silica fertilizers,and identified KAlSiO_(4)and K_(4)CaSi_(3)O_(9)as the primary silicates products.Observation of the surface morphology of the samples was conducted by scanning electron microscopy(SEM)and X-ray energy dispersive spectrometry(EDS),and compositional analysis of the micro-regions.The acceleration action of CaCO_(3)in the decomposition process of lithium pyroxene acid-leaching residues was demonstrated by the thermogravimetry-differential scanning calorimetry(TG-DSC)test.Determination of heavy metal elements in Si fertilizer was performed by ICP-OES.Potting experiments confirmed that the best growth of pakchoi was achieved when 5 g·kg^(-1)of Si fertilizer was applied.These evidence suggests that the Si fertilizer prepared in this study is a promising candidate for a silica-supplemented soil.展开更多
Frequency conversion is pivotal in nonlinear optics and quantum optics for manipulating and translating light signals across different wavelength regimes.Achieving frequency conversion between two light beams with a s...Frequency conversion is pivotal in nonlinear optics and quantum optics for manipulating and translating light signals across different wavelength regimes.Achieving frequency conversion between two light beams with a small frequency interval is a central challenge.In this work,we design a pair of coupled silicon microrings wherein coupled-induced modesplitting exists to achieve a small frequency shift by the process of four-wave mixing Bragg scattering.As an example,the signal can be up or down converted to the idler which is 15.5 GHz spaced when two pumps align with another pair of split resonances.The results unveil the potential of coupled microring resonators for small interval frequency conversion in a high-fidelity,all-optical,and signal processing quantum frequency interface.展开更多
Silicon(Si)has emerged as a potent anode material for lithium-ion batteries(LIBs),but faces challenges like low electrical conductivity and significant volume changes during lithiation/delithiation,leading to material...Silicon(Si)has emerged as a potent anode material for lithium-ion batteries(LIBs),but faces challenges like low electrical conductivity and significant volume changes during lithiation/delithiation,leading to material pulverization and capacity degradation.Recent research on nanostructured Si aims to mitigate volume expansion and enhance electrochemical performance,yet still grapples with issues like pulverization,unstable solid electrolyte interface(SEI)growth,and interparticle resistance.This review delves into innovative strategies for optimizing Si anodes’electrochemical performance via structural engineering,focusing on the synthesis of Si/C composites,engineering multidimensional nanostructures,and applying non-carbonaceous coatings.Forming a stable SEI is vital to prevent electrolyte decomposition and enhance Li^(+)transport,thereby stabilizing the Si anode interface and boosting cycling Coulombic efficiency.We also examine groundbreaking advancements such as self-healing polymers and advanced prelithiation methods to improve initial Coulombic efficiency and combat capacity loss.Our review uniquely provides a detailed examination of these strategies in real-world applications,moving beyond theoretical discussions.It offers a critical analysis of these approaches in terms of performance enhancement,scalability,and commercial feasibility.In conclusion,this review presents a comprehensive view and a forward-looking perspective on designing robust,high-performance Si-based anodes the next generation of LIBs.展开更多
Fragrant rice has a high market value,and it is a popular rice type among consumers owing to its pleasant flavor.Plantation methods,nitrogen(N)fertilizers,and silicon(Si)fertilizers can affect the grain yield and frag...Fragrant rice has a high market value,and it is a popular rice type among consumers owing to its pleasant flavor.Plantation methods,nitrogen(N)fertilizers,and silicon(Si)fertilizers can affect the grain yield and fragrance of fragrant rice.However,the core commercial rice production attributes,namely the head rice yield(HRY)and 2-acetyl-1-pyrroline(2-AP)content of fragrant rice,under various nitrogen and silicon(N-Si)fertilization levels and different plantation methods remain unknown.The field experiment in this study was performed in the early seasons of 2018 and 2019 with two popular indica fragrant rice cultivars(Yuxiangyouzhan and Xiangyaxiangzhan).They were grown under six N-Si fertilization treatments(combinations of two levels of Si fertilizer,0 kg Si ha^(−1)(Si0)and 150 kg Si ha^(−1)(Si1),and three levels of N fertilizer,0 kg N ha^(−1)(N0),150 kg N ha^(−1)(N1),and 220 kg N ha^(−1)(N2))and three plantation methods(artificial transplanting(AT),mechanical transplanting(MT),and mechanical direct-seeding(MD)).The results showed that the N-Si fertilization treatments and all the plantation methods significantly affected the HRY and 2-AP content and related parameters of the two different fragrant rice cultivars.Compared with the Si0N0 treatment,the N-Si fertilization treatments resulted in higher HRY and 2-AP contents.The rates of brown rice,milled rice,head rice,and chalky rice of the fragrant rice also improved with the N-Si fertilization treatments.The N-Si fertilization treatments increased the activities of N metabolism enzymes and the accumulation of N and Si in various parts of the fragrant rice,and affected their antioxidant response parameters.The key parameters for the HRY and 2-AP content were assessed by redundancy analysis.Furthermore,the structural equation model revealed that the Si and N accumulation levels indirectly affected the HRY by affecting the N metabolism enzyme activity,N use efficiency,and grain quality of fragrant rice.Moreover,high N and Si accumulation directly promoted the 2-AP content or affected the antioxidant response parameters and indirectly regulated 2-AP synthesis.The interactions of the MT method with the N-Si fertilization treatments varied in the fragrant rice cultivars in terms of the HRY and 2-AP content,whereas the MD method was beneficial to the 2-AP content in both fragrant rice cultivars under the N-Si fertilization treatments.展开更多
Silicon(Si)is widely used as a lithium‐ion‐battery anode owing to its high capacity and abundant crustal reserves.However,large volume change upon cycling and poor conductivity of Si cause rapid capacity decay and p...Silicon(Si)is widely used as a lithium‐ion‐battery anode owing to its high capacity and abundant crustal reserves.However,large volume change upon cycling and poor conductivity of Si cause rapid capacity decay and poor fast‐charging capability limiting its commercial applications.Here,we propose a multilevel carbon architecture with vertical graphene sheets(VGSs)grown on surfaces of subnanoscopically and homogeneously dispersed Si–C composite nanospheres,which are subsequently embedded into a carbon matrix(C/VGSs@Si–C).Subnanoscopic C in the Si–C nanospheres,VGSs,and carbon matrix form a three‐dimensional conductive and robust network,which significantly improves the conductivity and suppresses the volume expansion of Si,thereby boosting charge transport and improving electrode stability.The VGSs with vast exposed edges considerably increase the contact area with the carbon matrix and supply directional transport channels through the entire material,which boosts charge transport.The carbon matrix encapsulates VGSs@Si–C to decrease the specific surface area and increase tap density,thus yielding high first Coulombic efficiency and electrode compaction density.Consequently,C/VGSs@Si–C delivers excellent Li‐ion storage performances under industrial electrode conditions.In particular,the full cells show high energy densities of 603.5 Wh kg^(−1)and 1685.5 Wh L^(−1)at 0.1 C and maintain 80.7%of the energy density at 3 C.展开更多
Silicon/carbon composites,which integrate the high lithium storage performance of silicon with the exceptional mechanical strength and conductivity of carbon,will replace the traditional graphite electrodes for high-e...Silicon/carbon composites,which integrate the high lithium storage performance of silicon with the exceptional mechanical strength and conductivity of carbon,will replace the traditional graphite electrodes for high-energy lithium-ion batteries.Various strategies have been designed to synthesize silicon/carbon composites for tackling the issues of anode pulverization and poor stability in the anodes,thereby improving the lithium storage ability.The effect of the regulation method at each scale on the final negative electrode performance remains unclear.However,it has not been fully clarified how the regulation methods at each scale influence the final anode performance.This review will categorize the materials structure into three scales:molecular scale,nanoscale,and microscale.First,the review will examine modification methods at the molecular scale,focusing on the interfacial bonding force between silicon and carbon.Next,it will summarize various nanostructures and special shapes in the nanoscale to explore the construction of silicon/carbon composites.Lastly,the review will provide an analysis of microscale control approaches,focusing on the formation of composite particle with micron size and the utilization of micro-Si.This review provides a comprehensive overview of the multi-scale design of silicon/carbon composite anode materials and their optimization strategies to enhance the performance of lithium-ion batteries.展开更多
AIM:To evaluate the efficacy and safety of silicone oil(SO)as a corneal lubricant to improve visualization during vitrectomy.METHODS:Patients who underwent vitreoretinal surgery were divided into two groups.Group 1 wa...AIM:To evaluate the efficacy and safety of silicone oil(SO)as a corneal lubricant to improve visualization during vitrectomy.METHODS:Patients who underwent vitreoretinal surgery were divided into two groups.Group 1 was operated on with initial SO(Oxane 5700)as a corneal lubricant.Group 2 was operated on with initial lactated ringer’s solution(LRS)and then replaced with SO as required.Fundus clarity was scored during the surgery.Fluorescein staining was performed to determine the damage to corneal epithelium.RESULTS:Totally 114 eyes of 114 patients were included.Single SO use maintained a clear cornea and provided excellent visualization of surgical image.In group 1,the fundus clarity was grade 3 in 41/45 eyes and grade 2 in 4/45 eyes.In group 2,corneal edema frequently occurred after initial LRS use.The fundus clarity was grade 3 in 19/69 eyes,2 in 37/69 eyes and 1 in 13/69 eyes(P<0.05).SO was applied in 29 eyes of initial LRS use with subsequent corneal edema,which eliminated the corneal edema in 26 eyes.Corneal fluorescein staining score in group 1 was 0 in 28 eyes,1 in 11 eyes and 2 in 6 eyes,and 40,20 and 9,respectively,in group 2(all P>0.05).CONCLUSION:The use of SO as a corneal lubricant is effective and safe for preserving and improving corneal clarity and providing clear surgical field during vitrectomy.展开更多
Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than t...Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.展开更多
The ramifications of global climate change and resource scarcities have made it imperative to re-examine the definition of sustainable energy-storage systems.It is crucial to recognize that not all renewable resources...The ramifications of global climate change and resource scarcities have made it imperative to re-examine the definition of sustainable energy-storage systems.It is crucial to recognize that not all renewable resources are inherently sustainable,and their full impact on the environment must be assessed.With the proliferation of invasive jellyfish species wreaking havoc on marine ecosystems and economies worldwide,utilizing overabundant jellyfish as a carbon source presents an opportunity to create energy-storage systems that are both financially beneficial and environmentally remediating.Accordingly,a comprehensive approach to sustainability also requires eco-friendly solutions throughout the entire lifecycle,from material sourcing to battery production,without compromising highperformance requirements.Currently,most electrode syntheses for lithium-ion batteries(LIBs) employed are energy-intensive,multiple-steps,complex,and additive-heavy.In response,this work pioneers the straightforward use of low-energy laser irradiation of a jellyfish biomass/silicon nanoparticle blend to encapsulate the silicon nanoparticles in-situ within the as-forming conductive carbonized matrix,creating sustainable and additive-free composite anodes.The self-standing anode is directly synthesized under ambient conditions and requires no post-processing.Here,a laser-synthesized conductive threedimensional porous carbon/silicon composite anode from raw jellyfish biomass for LIBs is presented,displaying outstanding cyclic stability(>1000 cycles),excellent capacity retention(>50% retention after1000 cycles),exceptional coulombic efficiency(>99%),superb reversible gravimetric capacity(>2000 mAh/g),and high rate performance capability(>1.6 A/g),paving a new path to future sustainable energy production.展开更多
Free-standing silicon anodes with high proportion of active materials have aroused great attention;however,the mechanical stability and electrochemical performance are severely suppressed.Herein,to resolve the appeal ...Free-standing silicon anodes with high proportion of active materials have aroused great attention;however,the mechanical stability and electrochemical performance are severely suppressed.Herein,to resolve the appeal issues,a free-standing anode with a"corrugated paper"shape on micro-scale and a topological crosslinking network on the submicron and nano-scale is designed.Essentially,an integrated three-dimensional electrode structure is constructed based on robust carbon nanotubes network with firmly anchored SiNPs via forming interlocking junctions.In which,the hierarchical interlocking structure is achieved by directional induction of the binder,which ensures well integration during cycling so that significantly enhances mechanical stability as well as electronic and ionic conductivity of electrodes.Benefiting from it,this anode exhibits outsta nding performance under harsh service conditions including high Si loading,ultrahigh areal capacity(33.2 mA h cm^(-2)),and high/low temperatures(-15-60℃),which significantly extends its practical prospect.Furthermore,the optimization mechanism of this electrode is explored to verify the crack-healing and structure-integration maintaining along cycling via a unique self-stabilization process.Thus,from both the fundamental and engineering views,this strategy offers a promising path to produce high-performance free-standing electrodes for flexible device applications especially facing volume effect challenges.展开更多
基金supported by the Natural Science Foundation of Zhejiang Province(Grant No.LQ24F040007)the National Natural Science Foundation of China(Grant No.U22A2075)the Opening Project of State Key Laboratory of Polymer Materials Engineering(Sichuan University)(Grant No.sklpme2024-1-21).
文摘To address the increasing demand for massive data storage and processing,brain-inspired neuromorphic comput-ing systems based on artificial synaptic devices have been actively developed in recent years.Among the various materials inves-tigated for the fabrication of synaptic devices,silicon carbide(SiC)has emerged as a preferred choices due to its high electron mobility,superior thermal conductivity,and excellent thermal stability,which exhibits promising potential for neuromorphic applications in harsh environments.In this review,the recent progress in SiC-based synaptic devices is summarized.Firstly,an in-depth discussion is conducted regarding the categories,working mechanisms,and structural designs of these devices.Subse-quently,several application scenarios for SiC-based synaptic devices are presented.Finally,a few perspectives and directions for their future development are outlined.
文摘Grain-oriented silicon steels were prepared at different heating rates during high temperature annealing,in which the evolution of magnetic properties,grain orientations and precipitates were studied.To illustrate the Zener factor,the diameter and number density of precipitates of interrupted testing samples were statistically calculated.The effect of precipitate ripening on the Goss texture and magnetic property was investigated.Data indicated that the trend of Zener factor was similar under different heating rates,first increasing and then decreasing,and that the precipitate maturing was greatly inhibited as the heating rate increased.Secondary recrystallization was developed at the temperature of 1010℃when a heating rate of 5℃/h was used,resulting in Goss,Brass and{110}<227>oriented grains growing abnormally and a magnetic induction intensity of 1.90T.Furthermore,increasing the heating rate to 20℃/h would inhibit the development of undesirable oriented grains and obtain a sharp Goss texture.However,when the heating rate was extremely fast,such as 40℃/h,poor secondary recrystallization was developed with many island grains,corresponding to a decrease in magnetic induction intensity to 1.87 T.At a suitable heating rate of 20℃/h,the sharpest Goss texture and the highest magnetic induction of 1.94 T with an onset secondary recrystallization temperature of 1020℃were found among the experimental variables in this study.The heating rate affected the initial temperature of secondary recrystallization by controlling the maturation of precipitates,leading to the deviation and dispersion of Goss texture,thereby reducing the magnetic properties.
基金Key Research project of Gansu Province of China(22YF7NA108)National Natural Science Foundation of China(31860549)+1 种基金Industry Supporting Project from Education Department of Gansu Province(2023CYZC-49)Major Science and Technology project of Gansu province(24ZDNA006)。
文摘【Objectives】Si and microbial application could relieve the crop replanting problems(CRPs).We further studied the change of key microorganisms that are related to the beneficial effects,aiming at provide reference for the manufacture and application of both microbial agents and Si fertilizer in food lily production.【Methods】A field experiment was conducted over a three-year period,from March 2019 to March 2022.The experimental field had been continuously cultivated with lily for 9 years.Three treatments were established:silicon fertilizer(SF),microbial agents(“Special 8^(TM)”,MF),and combined application of silicon fertilizer and microbial agents(SMF).A control group with blank soil(CK)was also included.At seedling stage of Lanzhou lilies in 2020 and 2021,the shoot and bulb dry weight,and the plant height and stem diameter of Lanzhou lilies were investigated for calculation of seedling index.In July 2020,20 plants were selected in each plot,and root zone soils were sampled at a depth of 20 cm,10 cm away from the roots,and then mixed to form a composite sample.The soil available Si and organic matter content were analyzed,and the fungal community structure and some specific microbial groups in soils were determined with high-throughput sequencing of ITS.【Results】All the three treatments significantly enhanced the lily plant growth and the seedling index,compared to CK.Besides,SF and MF treatments increased the relative abundances(RA)and diversity of fungal communities,and altered the community structures.The RA of some specific groups were found to be significantly correlated with the seedling index and/or soil available Si.Of them,the RA of the genera Fusarium,Dactylonectria,Humicola,Stilbella,and the species Humicola_grisea showed a positive correlation,while that of the genera Mortierella,Stilbella,Holtermanniella,and the species Mortierella_fatshederae showed a negative correlation with seedling index.The genera Fusarium,Stilbella,the species Humicola_grisea,and Dactylonectria_estremocensis showed a positive correlation,while the genura Stilbella,and the species Mortierella fatshederae showed a negative correlation with available Si content.In the co-occurence network of top twenty fungal genera and top sixteen bacterial genera(RA>0.2%),Holtermanniella was the only genus that interacted with the bacteria and negatively correlated with bacterial genus Blastococcus.Holtermanniella was also the most densely connected genera,followed by the genus Fusarium,Didymella and Humicola.In addition,the genus Holtermanniella was the key species connecting fungal and bacterial community in soil.Fungal functional prediction revealed that SF,MF and SMF treatments decreased plant pathogens guilds and increased the beneficial guilds Ectomycorrhizal,plant saprophyte,leaf saprophyte,and arbuscular mycorrhizal compared to CK.【Conclusions】Combined application of silicon fertilizer and microbial agents can alleviate continuous replanting problems of Lanzhou lilies through restoring the fungal community diversity,and promoting plant residue depredation,thus reducing soil born disease incidence.The beneficial genus Humicola and its one species H.grisea acts as bioconversion,and the genus Acremonium acts as plant pathogen inhibitor.
基金financially supported by the Norwegian Ferroalloy Producers Research Association (FFF) and the Research Council of Norway through KSP project 326581 Recursive。
文摘The production processes for Si and FeSi have traditionally been considered slag-free.However,recent excavations have revealed significant accumulation of CaO–SiO_(2)–Al_(2)O_(3)slag within the furnaces.This accumulation can obstruct the flow of materials and gases,resulting in lower metal yield and higher energy consumption.The main objective of the current work is to enhance our understanding of slag formation during Si and FeSi production.We investigate slag formation through the dissolution of limestone and iron oxide in quartz and condensate,focusing on the reactions between these materials at a gram scale.Our findings indicate that most slag reaches equilibrium relatively quickly at temperatures starting from 1673 K.Notably,slag formation starts at lower temperature when the iron source is present (1573 K) compared to when only CaO is involved (1673 K).The minor elements tend to accumulate at quartz grain boundaries prior to slag formation.Furthermore,the slag produced from condensate contains less SiO_(2)than that generated from quartz with limestone.The type of quartz source and SiO_(2)phase appears to have little influence on slag formation.Good wettability is a significant factor in reaction between quartz and slag.FactSage calculations indicates that the viscosity of the slag ranges from 0.02 to 14.4 Pa·s under furnace conditions,comparable to the viscosity of honey or motor oil at room temperature.
基金supported by the National Natural Science Foundation of China (No. 22008256)。
文摘Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes during repeated charge–discharge cycles. In this work, a “soft-hard”double-layer coating has been proposed and carried out on ball-milled silicon particles. It is composed of inside conductive pathway and outside elastic coating, which is achieved by decomposing a conductive graphite layer on the silicon surface and further coating it with a polymer layer.The incorporation of the second elastic coating on the inside carbon coating enables silicon particles strongly interacted with binders, thereby making the electrodes displaying an obviously improved cycling stability. As-obtained double-coated silicon anodes deliver a reversible capacity of 2280 m Ah g^(-1)at the voltage of 0.05–2 V, and maintains over 1763 mAh g^(-1)after 50 cycles. The double-layer coating does not crack after the repeated cycling, critical for the robust performance of the electrodes. In addition, as-obtained silicon particles are mixed with commercial graphite to make actual anodes for lithium-ion batteries. A capacity of 714 mAh g^(-1)has been achieved based on the total mass of the electrodes containing 10 wt.% double-coated silicon particles. Compared with traditional carbon coating or polymeric coating, the double-coating electrodes display a much better performance. Therefore, the double-coating strategy can give inspiration for better design and synthesis of silicon anodes, as well as other battery materials.
基金supported by the Science and Technology Research and Development Plan of the China State Railway Group Company Limited(No.Q2023J012).
文摘Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability and short service life.To address these issues,low-phenyl silicone rubber was prepared and tested,and the finite element analysis and experimental studies on the sealing performance of its sealing rings were carried out.Design/methodology/approach–The low-temperature resistance and thermal stability of the prepared lowphenyl silicone rubber were studied using low-temperature tensile testing,differential scanning calorimetry,dynamic thermomechanical analysis and thermogravimetric analysis.The sealing performance of the lowphenyl silicone rubber sealing ring was studied by using finite element analysis software abaqus and experiments.Findings–The prepared low-phenyl silicone rubber sealing ring possessed excellent low-temperature resistance and thermal stability.According to the finite element analysis results,the finish of the flange sealing surface and groove outer edge should be ensured,and extrusion damage should be avoided.The sealing rings were more susceptible to damage in high compression ratio and/or low-temperature environments.When the sealing effect was ensured,a small compression ratio should be selected,and rubbers with hardness and elasticity less affected by temperature should be selected.The prepared low-phenyl silicone rubber sealing ring had zero leakage at both room temperature(RT)and�508C.Originality/value–The innovation of this study is that it provides valuable data and experience for the future development of the sealing rings used in the brake pipe flange joints of the railway freight cars in China.
基金supported by the National Natural Science Foundation of China(22279026)the National Key Research and Development Program of China(2022YFE0138900)+2 种基金the Young Elite Scientist sponsorship program by CAST(no.20200148)the Natural Science Funds of Heilongjiang Province(YQ2021B003)the Fundamental Research Funds for the Central Universities(grant no.HIT.OCEF.2022017).
文摘Micrometer-sized silicon oxide(SiO)anodes encounter challenges in large-scale applications due to significant volume expansion during the alloy/de-alloy process.Herein,an innovative deep eutectic electrolyte derived from succinonitrile is introduced to enhance the cycling stability of SiO anodes.Density functional theory calculations validate a robust ion-dipole interaction between lithium ions(Li^(+))and succinonitrile(SN).The cosolvent fluoroethylene carbonate(FEC)optimizes the Li^(+)solvation structure in the SN-based electrolyte with its weakly solvating ability.Molecular dynamics simulations investigate the regulating mechanism of ion-dipole and cation-anion interaction.The unique Li^(+)solvation structure,enriched with FEC and TFSI^(-),facilitates the formation of an inorganic-organic composite solid electrolyte interphase on SiO anodes.Micro-CT further detects the inhibiting effect on the SiO volume expansion.As a result,the SiO|LiCoO_(2) full cells exhibit excellent electrochemical performance in deep eutectic-based electrolytes.This work presents an effective strategy for extending the cycle life of SiO anodes by designing a new SN-based deep eutectic electrolyte.
基金supported by Natural Science Foundation of Gansu Province(23JRRA745)the Fundamental Research Funds for the Central Universities(lzujbky2021-sp55).
文摘Converting CO_(2)and water into valuable chemicals like plant do is considered a promising approach to address both environmental and energy issues.Taking inspiration from the structures of natural leaves,we designed and synthesized a novel copper-coordinated covalent triazine framework(CuCTF)supported by silicon nanowire arrays on wafer chip.This marks the first-ever application of such a hybrid material in the photoelectrocatalytic reduction of CO_(2)under mild conditions.The Si@CuCTF6 heterojunction has exhibited exceptional selectivity of 95.6%towards multicarbon products(C_(2+))and apparent quantum efficiency(AQE)of 0.89%for carbon-based products.The active sites of the catalysts are derived from the nitrogen atoms of unique triazine ring structure in the ordered porous framework and the abundant Cu-N coordination sites with bipyridine units.Furthermore,through DFT calculations and operando FTIR spectra analysis,we proposed a comprehensive mechanism for the photoelectrocatalytic CO_(2)reduction,confirming the existence of key intermediate species such as*CO_(2)-,*=C=O,*CHO and*CO-CHO etc.This work not only provides a new way to mimic photosynthesis of plant leaves but also gives a new opportunity to enter this research field in the future.
基金supported by the National Natural Science Foundation of China(Grant No.62204245,U23A200098)Baima Lake Laboratory Joint Funds of the Zhejiang Provincial Natural Science Foundation of China(Grant No.LBMHD24E020002)+4 种基金Key Research and Development Program of Zhejiang Province(Grant No.2022C01215,2024C01092)China Postdoctoral Science Foundation(Grant No.2023M743620,2024T170960)Key Research and Development Program of Ningbo(Grant No.2023Z151)National Key Research and Development Program of China(Grant No.2024YFB3817304)Zhejiang Provincial Natural Science Foundation of China(Grant No.LY24F040003).
文摘Despite significant advancements in the power conversion efficiency(PCE)of perovskite/silicon tandem solar cells,improving carrier management in top cells remains challenging due to the defective dual interfaces of wide-bandgap perovskite,particularly on textured silicon surfaces.Herein,a series of halide ions(Cl^(-),Br^(-),I^(-))substituted piperazinium salts are designed and synthesized as post-treatment modifiers for perovskite surfaces.Notably,piperazinium chloride induces an asymmetric bidirectional ions distribution from the top to the bottom surface,with large piperazinium cations concentrating at the perovskite surface and small chloride anions migrating downward to accumulate at the buried interface.This results in effective dual-interface defect passivation and energy band modulation,enabling wide-bandgap(1.68 eV)perovskite solar cells to achieve a PCE of 22.3%and a record product of open-circuit voltage×fill factor(84.4%relative to the Shockley-Queisser limit).Furthermore,the device retains 91.3%of its initial efficiency after 1200 h of maximum power point tracking without encapsulation.When integrated with double-textured silicon heterojunction solar cells,a remarkable PCE of 31.5%is achieved for a 1.04 cm^(2) monolithic perovskite/silicon tandem solar cell,exhibiting excellent long-term operational stability(T_(80)=755 h)without encapsulation in ambient air.This work provides a convenient strategy on dual-interface engineering for making high-efficiency and stable perovskite platforms.
文摘We focus on a novel and economical route for the synthesis of Si fertilizer via the calcination method using lithium pyroxene acid-leaching residues as the starting materials.The molar ratio of Si/K/Ca of 1:1.4:0.8,calcination temperature of 900℃and calcination time of 120 min were identified as the optimal conditions to maximize the available Si content of the prepared Si fertilizer.The performance of the resulting product satisfies the Chinese agricultural standard for silica fertilizers,providing a new solution for the large-scale harmless and sustainable reuse of lithium pyroxene tailings.The X-ray diffraction(XRD)and Fourier transform infrared spectroscopy(FTIR)characterization elucidated the formation mechanism of silica fertilizers,and identified KAlSiO_(4)and K_(4)CaSi_(3)O_(9)as the primary silicates products.Observation of the surface morphology of the samples was conducted by scanning electron microscopy(SEM)and X-ray energy dispersive spectrometry(EDS),and compositional analysis of the micro-regions.The acceleration action of CaCO_(3)in the decomposition process of lithium pyroxene acid-leaching residues was demonstrated by the thermogravimetry-differential scanning calorimetry(TG-DSC)test.Determination of heavy metal elements in Si fertilizer was performed by ICP-OES.Potting experiments confirmed that the best growth of pakchoi was achieved when 5 g·kg^(-1)of Si fertilizer was applied.These evidence suggests that the Si fertilizer prepared in this study is a promising candidate for a silica-supplemented soil.
基金Project supported by the National Key Research and Development Program of China(Grant No.2022YFF0712800)。
文摘Frequency conversion is pivotal in nonlinear optics and quantum optics for manipulating and translating light signals across different wavelength regimes.Achieving frequency conversion between two light beams with a small frequency interval is a central challenge.In this work,we design a pair of coupled silicon microrings wherein coupled-induced modesplitting exists to achieve a small frequency shift by the process of four-wave mixing Bragg scattering.As an example,the signal can be up or down converted to the idler which is 15.5 GHz spaced when two pumps align with another pair of split resonances.The results unveil the potential of coupled microring resonators for small interval frequency conversion in a high-fidelity,all-optical,and signal processing quantum frequency interface.
基金financially supported by the Jiangsu Distinguished Professors Project(No.1711510024)the funding for Scientific Research Startup of Jiangsu University(Nos.4111510015,19JDG044)+3 种基金the Jiangsu Provincial Program for High-Level Innovative and Entrepreneurial Talents Introductionthe National Natural Science Foundation of China(No.22008091)Natural Science Foundation of Guangdong Province(2023A1515010894)the Open Project of Luzhou Key Laboratory of Fine Chemical Application Technology(HYJH-2302-A).
文摘Silicon(Si)has emerged as a potent anode material for lithium-ion batteries(LIBs),but faces challenges like low electrical conductivity and significant volume changes during lithiation/delithiation,leading to material pulverization and capacity degradation.Recent research on nanostructured Si aims to mitigate volume expansion and enhance electrochemical performance,yet still grapples with issues like pulverization,unstable solid electrolyte interface(SEI)growth,and interparticle resistance.This review delves into innovative strategies for optimizing Si anodes’electrochemical performance via structural engineering,focusing on the synthesis of Si/C composites,engineering multidimensional nanostructures,and applying non-carbonaceous coatings.Forming a stable SEI is vital to prevent electrolyte decomposition and enhance Li^(+)transport,thereby stabilizing the Si anode interface and boosting cycling Coulombic efficiency.We also examine groundbreaking advancements such as self-healing polymers and advanced prelithiation methods to improve initial Coulombic efficiency and combat capacity loss.Our review uniquely provides a detailed examination of these strategies in real-world applications,moving beyond theoretical discussions.It offers a critical analysis of these approaches in terms of performance enhancement,scalability,and commercial feasibility.In conclusion,this review presents a comprehensive view and a forward-looking perspective on designing robust,high-performance Si-based anodes the next generation of LIBs.
基金This project was financially supported by the National Natural Science Foundation of China(31601244 and 31971843)the Guangdong Provincial Key Field Research and Development Plan Project,China(2019B020221003)the Modern Agricultural Industrial Technology System of Guangdong Province,China(2020KJ105).
文摘Fragrant rice has a high market value,and it is a popular rice type among consumers owing to its pleasant flavor.Plantation methods,nitrogen(N)fertilizers,and silicon(Si)fertilizers can affect the grain yield and fragrance of fragrant rice.However,the core commercial rice production attributes,namely the head rice yield(HRY)and 2-acetyl-1-pyrroline(2-AP)content of fragrant rice,under various nitrogen and silicon(N-Si)fertilization levels and different plantation methods remain unknown.The field experiment in this study was performed in the early seasons of 2018 and 2019 with two popular indica fragrant rice cultivars(Yuxiangyouzhan and Xiangyaxiangzhan).They were grown under six N-Si fertilization treatments(combinations of two levels of Si fertilizer,0 kg Si ha^(−1)(Si0)and 150 kg Si ha^(−1)(Si1),and three levels of N fertilizer,0 kg N ha^(−1)(N0),150 kg N ha^(−1)(N1),and 220 kg N ha^(−1)(N2))and three plantation methods(artificial transplanting(AT),mechanical transplanting(MT),and mechanical direct-seeding(MD)).The results showed that the N-Si fertilization treatments and all the plantation methods significantly affected the HRY and 2-AP content and related parameters of the two different fragrant rice cultivars.Compared with the Si0N0 treatment,the N-Si fertilization treatments resulted in higher HRY and 2-AP contents.The rates of brown rice,milled rice,head rice,and chalky rice of the fragrant rice also improved with the N-Si fertilization treatments.The N-Si fertilization treatments increased the activities of N metabolism enzymes and the accumulation of N and Si in various parts of the fragrant rice,and affected their antioxidant response parameters.The key parameters for the HRY and 2-AP content were assessed by redundancy analysis.Furthermore,the structural equation model revealed that the Si and N accumulation levels indirectly affected the HRY by affecting the N metabolism enzyme activity,N use efficiency,and grain quality of fragrant rice.Moreover,high N and Si accumulation directly promoted the 2-AP content or affected the antioxidant response parameters and indirectly regulated 2-AP synthesis.The interactions of the MT method with the N-Si fertilization treatments varied in the fragrant rice cultivars in terms of the HRY and 2-AP content,whereas the MD method was beneficial to the 2-AP content in both fragrant rice cultivars under the N-Si fertilization treatments.
基金Guangdong Basic and Applied Basic Research Foundation,Grant/Award Number:2020A1515110762Research Grants Council of the Hong Kong Special Administrative Region,China,Grant/Award Number:R6005‐20Shenzhen Key Laboratory of Advanced Energy Storage,Grant/Award Number:ZDSYS20220401141000001。
文摘Silicon(Si)is widely used as a lithium‐ion‐battery anode owing to its high capacity and abundant crustal reserves.However,large volume change upon cycling and poor conductivity of Si cause rapid capacity decay and poor fast‐charging capability limiting its commercial applications.Here,we propose a multilevel carbon architecture with vertical graphene sheets(VGSs)grown on surfaces of subnanoscopically and homogeneously dispersed Si–C composite nanospheres,which are subsequently embedded into a carbon matrix(C/VGSs@Si–C).Subnanoscopic C in the Si–C nanospheres,VGSs,and carbon matrix form a three‐dimensional conductive and robust network,which significantly improves the conductivity and suppresses the volume expansion of Si,thereby boosting charge transport and improving electrode stability.The VGSs with vast exposed edges considerably increase the contact area with the carbon matrix and supply directional transport channels through the entire material,which boosts charge transport.The carbon matrix encapsulates VGSs@Si–C to decrease the specific surface area and increase tap density,thus yielding high first Coulombic efficiency and electrode compaction density.Consequently,C/VGSs@Si–C delivers excellent Li‐ion storage performances under industrial electrode conditions.In particular,the full cells show high energy densities of 603.5 Wh kg^(−1)and 1685.5 Wh L^(−1)at 0.1 C and maintain 80.7%of the energy density at 3 C.
基金funded by the Research Fund of State Key Laboratory of Mesoscience and Engineering (MESO-23-T03)the National Natural Science Foundation (22278423)+1 种基金the National Key Research and Development Program of China (2022YFB3805602)the Science Foundation of China University of Petroleum,Beijing (2462021QNXZ007)。
文摘Silicon/carbon composites,which integrate the high lithium storage performance of silicon with the exceptional mechanical strength and conductivity of carbon,will replace the traditional graphite electrodes for high-energy lithium-ion batteries.Various strategies have been designed to synthesize silicon/carbon composites for tackling the issues of anode pulverization and poor stability in the anodes,thereby improving the lithium storage ability.The effect of the regulation method at each scale on the final negative electrode performance remains unclear.However,it has not been fully clarified how the regulation methods at each scale influence the final anode performance.This review will categorize the materials structure into three scales:molecular scale,nanoscale,and microscale.First,the review will examine modification methods at the molecular scale,focusing on the interfacial bonding force between silicon and carbon.Next,it will summarize various nanostructures and special shapes in the nanoscale to explore the construction of silicon/carbon composites.Lastly,the review will provide an analysis of microscale control approaches,focusing on the formation of composite particle with micron size and the utilization of micro-Si.This review provides a comprehensive overview of the multi-scale design of silicon/carbon composite anode materials and their optimization strategies to enhance the performance of lithium-ion batteries.
基金Supported by the Shanghai Key Clinical Specialty,Shanghai Eye Disease Research Center(No.2022ZZ01003)the Science and Technology Commission of Shanghai(No.20DZ2270800).
文摘AIM:To evaluate the efficacy and safety of silicone oil(SO)as a corneal lubricant to improve visualization during vitrectomy.METHODS:Patients who underwent vitreoretinal surgery were divided into two groups.Group 1 was operated on with initial SO(Oxane 5700)as a corneal lubricant.Group 2 was operated on with initial lactated ringer’s solution(LRS)and then replaced with SO as required.Fundus clarity was scored during the surgery.Fluorescein staining was performed to determine the damage to corneal epithelium.RESULTS:Totally 114 eyes of 114 patients were included.Single SO use maintained a clear cornea and provided excellent visualization of surgical image.In group 1,the fundus clarity was grade 3 in 41/45 eyes and grade 2 in 4/45 eyes.In group 2,corneal edema frequently occurred after initial LRS use.The fundus clarity was grade 3 in 19/69 eyes,2 in 37/69 eyes and 1 in 13/69 eyes(P<0.05).SO was applied in 29 eyes of initial LRS use with subsequent corneal edema,which eliminated the corneal edema in 26 eyes.Corneal fluorescein staining score in group 1 was 0 in 28 eyes,1 in 11 eyes and 2 in 6 eyes,and 40,20 and 9,respectively,in group 2(all P>0.05).CONCLUSION:The use of SO as a corneal lubricant is effective and safe for preserving and improving corneal clarity and providing clear surgical field during vitrectomy.
基金supports from the National Natural Science Foundation of China(12074123,12174108)the Foundation of‘Manufacturing beyond limits’of Shanghai‘Talent Program'of Henan Academy of Sciences.
文摘Femtosecond laser-induced periodic surface structures(LIPSS)have been extensively studied over the past few decades.In particular,the period and groove width of high-spatial-frequency LIPSS(HSFL)is much smaller than the diffraction limit,making it a useful method for efficient nanomanufacturing.However,compared with the low-spatial-frequency LIPSS(LSFL),the structure size of the HSFL is smaller,and it is more easily submerged.Therefore,the formation mechanism of HSFL is complex and has always been a research hotspot in this field.In this study,regular LSFL with a period of 760 nm was fabricated in advance on a silicon surface with two-beam interference using an 800 nm,50 fs femtosecond laser.The ultrafast dynamics of HSFL formation on the silicon surface of prefabricated LSFL under single femtosecond laser pulse irradiation were observed and analyzed for the first time using collinear pump-probe imaging method.In general,the evolution of the surface structure undergoes five sequential stages:the LSFL begins to split,becomes uniform HSFL,degenerates into an irregular LSFL,undergoes secondary splitting into a weakly uniform HSFL,and evolves into an irregular LSFL or is submerged.The results indicate that the local enhancement of the submerged nanocavity,or the nanoplasma,in the prefabricated LSFL ridge led to the splitting of the LSFL,and the thermodynamic effect drove the homogenization of the splitting LSFL,which evolved into HSFL.
文摘The ramifications of global climate change and resource scarcities have made it imperative to re-examine the definition of sustainable energy-storage systems.It is crucial to recognize that not all renewable resources are inherently sustainable,and their full impact on the environment must be assessed.With the proliferation of invasive jellyfish species wreaking havoc on marine ecosystems and economies worldwide,utilizing overabundant jellyfish as a carbon source presents an opportunity to create energy-storage systems that are both financially beneficial and environmentally remediating.Accordingly,a comprehensive approach to sustainability also requires eco-friendly solutions throughout the entire lifecycle,from material sourcing to battery production,without compromising highperformance requirements.Currently,most electrode syntheses for lithium-ion batteries(LIBs) employed are energy-intensive,multiple-steps,complex,and additive-heavy.In response,this work pioneers the straightforward use of low-energy laser irradiation of a jellyfish biomass/silicon nanoparticle blend to encapsulate the silicon nanoparticles in-situ within the as-forming conductive carbonized matrix,creating sustainable and additive-free composite anodes.The self-standing anode is directly synthesized under ambient conditions and requires no post-processing.Here,a laser-synthesized conductive threedimensional porous carbon/silicon composite anode from raw jellyfish biomass for LIBs is presented,displaying outstanding cyclic stability(>1000 cycles),excellent capacity retention(>50% retention after1000 cycles),exceptional coulombic efficiency(>99%),superb reversible gravimetric capacity(>2000 mAh/g),and high rate performance capability(>1.6 A/g),paving a new path to future sustainable energy production.
基金sponsored by the National Natural Science Foundation of China(21905221,21805221)the Suzhou Technological innovation of key industries-research and development of key technologies(SGC2021118)。
文摘Free-standing silicon anodes with high proportion of active materials have aroused great attention;however,the mechanical stability and electrochemical performance are severely suppressed.Herein,to resolve the appeal issues,a free-standing anode with a"corrugated paper"shape on micro-scale and a topological crosslinking network on the submicron and nano-scale is designed.Essentially,an integrated three-dimensional electrode structure is constructed based on robust carbon nanotubes network with firmly anchored SiNPs via forming interlocking junctions.In which,the hierarchical interlocking structure is achieved by directional induction of the binder,which ensures well integration during cycling so that significantly enhances mechanical stability as well as electronic and ionic conductivity of electrodes.Benefiting from it,this anode exhibits outsta nding performance under harsh service conditions including high Si loading,ultrahigh areal capacity(33.2 mA h cm^(-2)),and high/low temperatures(-15-60℃),which significantly extends its practical prospect.Furthermore,the optimization mechanism of this electrode is explored to verify the crack-healing and structure-integration maintaining along cycling via a unique self-stabilization process.Thus,from both the fundamental and engineering views,this strategy offers a promising path to produce high-performance free-standing electrodes for flexible device applications especially facing volume effect challenges.
