A proportional integral derivative （PID） controller is designed and attached to electro-hydraulic servo actuator system （EHSAS） to control the angular position of the rotary actuator which control the movable surf...A proportional integral derivative （PID） controller is designed and attached to electro-hydraulic servo actuator system （EHSAS） to control the angular position of the rotary actuator which control the movable surface of space vehicles. The PID gain parameters are optimized by the genetic algorithm （GA）. The controller is verified on the new state-space model of servo-valves attached to the physical rotary actuator by SIMULINK program. The controller and the state-space model are verified experimentally. Simulation and experimental results verify the effectiveness of the PID controller adaptive by GA to control the angular position of the rotary actuator as compared with the classical PID controller and the compensator controller.展开更多
Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varietie...Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varieties of PWM modulation methods, and concludes on the relationship between dithers and the different methods, and then discusses the influence of friction to the dithers. Results from experiments regarding the dynamic and static responses on the given system support the theories presented.展开更多
The angular position controller is system （EHSAS） to control the output of the rotary applied to electro-hydraulic servo actuator actuator. It works as a compensator based on the frequency response of the EHSAS. Its...The angular position controller is system （EHSAS） to control the output of the rotary applied to electro-hydraulic servo actuator actuator. It works as a compensator based on the frequency response of the EHSAS. Its design model is verified on the state-space model of EHSAS by using simulation program SIMULINK. Real data used to test the system. Simulation results give a good agreement for the controller and also for the state-space model.展开更多
An ultra-precision servo control system for MWEDM (micro wire electrical discharge machining) based on piezoelectric ceramic motor drivers was developed. The servo discharge detection adopts an average voltage detecti...An ultra-precision servo control system for MWEDM (micro wire electrical discharge machining) based on piezoelectric ceramic motor drivers was developed. The servo discharge detection adopts an average voltage detection method, utilizes statistical methods to analyze the measured data, then controls discharge gap and makes the process more stable. The servo feed system based on DSP microprocessors applies a PID controller with incomplete derivation to reduce overshoot to improve machining accuracy, and also adopts adaptive dead-zone inverse compensation to eliminate dead-zone caused by piezoelectric ceramic motions in low servo feed speed. The simulation results show that the methods proposed in this paper can make the system recover its linearity and converge the dead-zone parameters. It is proved that the method proposed is efficient in solving this problem. Cooperating with a micro energy pulse generator, this equipment’s machining accuracy is smaller than ±0.2 micron, and surface roughness Ra is less than 0.1 micron. Punch die and cavity die (micro gear die, module 100 micron, thickness 3.5 millimeter) have been machined independently in two die steel work-pieces. These pieces can mate very well to work, which shows that the servo control system satisfies the need of MWEDM for high precision micro fabrication.展开更多
The reliability and robustness of the electro-hydraulic servo control system for heavy-duty forging machine play an important role in forging processes. A mathematic model of 50 MN water press for free forging was cre...The reliability and robustness of the electro-hydraulic servo control system for heavy-duty forging machine play an important role in forging processes. A mathematic model of 50 MN water press for free forging was created in this research. The dynamic robust compensator integrating with PID control method is designed and applied to the mathematical model simulation. The simulated results approved that the dynamic robust compensator application restrains interference from extra load and improves the electro-hydraulic position servo control system accuracy and stability.展开更多
A tracking stability control problem for the vertical electric stabilization system of moving tank based on adaptive robust servo control is addressed.This paper mainly focuses on two types of possibly fast timevaryin...A tracking stability control problem for the vertical electric stabilization system of moving tank based on adaptive robust servo control is addressed.This paper mainly focuses on two types of possibly fast timevarying but bounded uncertainty within the vertical electric stabilization system:model parameter uncertainty and uncertain nonlinearity.First,the vertical electric stabilization system is constructed as an uncertain nonlinear dynamic system that can reflect the practical mechanics transfer process of the system.Second,the dynamical equation in the form of state space is established by designing the angular tracking error.Third,the comprehensive parameter of system uncertainty is designed to estimate the most conservative effects of uncertainty.Finally,an adaptive robust servo control which can effectively handle the combined effects of complex nonlinearity and uncertainty is proposed.The feasibility of the proposed control strategy under the practical physical condition is validated through the tests on the experimental platform.This paper pioneers the introduction of the internal nonlinearity and uncertainty of the vertical electric stabilization system into the settlement of the tracking stability control problem,and validates the advanced servo control strategy through experiment for the first time.展开更多
A novel electro-hydraulic servo control algorithm was introduced. The primary idea of this algorithm was to combine the notion of model prediction with the generic model control （GMC）. The performance of the GMC al-...A novel electro-hydraulic servo control algorithm was introduced. The primary idea of this algorithm was to combine the notion of model prediction with the generic model control （GMC）. The performance of the GMC al- gorithm was improved by receding optimization and feedback correction. By the predictive model of output errors of an electro-hydraulic servo control system based on the improved weighted least square support vector machines （WLS-SVM） to forecast and compensate the future sequence errors, the control precision and robustness were im- proved. The improved GMC based on the improved WLS-SVM was applied to an electro-hydraulic servo control sys- tem for hot strip rolling control systems. The simulation results showed the feasibility and effectiveness of the pres- ent algorithm.展开更多
A new kind of volume control hydraulic press that combines the advantages of both hydraulic and SRM(switched reluctance motor) driving technology is developed.Considering that the serious dead zone and time-variant no...A new kind of volume control hydraulic press that combines the advantages of both hydraulic and SRM(switched reluctance motor) driving technology is developed.Considering that the serious dead zone and time-variant nonlinearity exist in the volume control electro-hydraulic servo system,the ILC(iterative learning control) method is applied to tracking the displacement curve of the hydraulic press slider.In order to improve the convergence speed and precision of ILC,a fuzzy ILC algorithm that utilizes the fuzzy strategy to adaptively adjust the iterative learning gains is put forward.The simulation and experimental researches are carried out to investigate the convergence speed and precision of the fuzzy ILC for hydraulic press slider position tracking.The results show that the fuzzy ILC can raise the iterative learning speed enormously,and realize the tracking control of slider displacement curve with rapid response speed and high control precision.In experiment,the maximum tracking error 0.02 V is achieved through 12 iterations only.展开更多
Single gimbal control moment gyroscope(SGCMG)with high precision and fast response is an important attitude control system for high precision docking,rapid maneuvering navigation and guidance system in the aerospace f...Single gimbal control moment gyroscope(SGCMG)with high precision and fast response is an important attitude control system for high precision docking,rapid maneuvering navigation and guidance system in the aerospace field.In this paper,considering the influence of multi-source disturbance,a data-based feedback relearning(FR)algorithm is designed for the robust control of SGCMG gimbal servo system.Based on adaptive dynamic programming and least-square principle,the FR algorithm is used to obtain the servo control strategy by collecting the online operation data of SGCMG system.This is a model-free learning strategy in which no prior knowledge of the SGCMG model is required.Then,combining the reinforcement learning mechanism,the servo control strategy is interacted with system dynamic of SGCMG.The adaptive evaluation and improvement of servo control strategy against the multi-source disturbance are realized.Meanwhile,a data redistribution method based on experience replay is designed to reduce data correlation to improve algorithm stability and data utilization efficiency.Finally,by comparing with other methods on the simulation model of SGCMG,the effectiveness of the proposed servo control strategy is verified.展开更多
Flight simulator is an important device and a typical high-performance position and speed servo system used in the hardware-in-the-loop simulation of flight control system. Friction is the main nonlinear resistance in...Flight simulator is an important device and a typical high-performance position and speed servo system used in the hardware-in-the-loop simulation of flight control system. Friction is the main nonlinear resistance in the flight simulator servo system, especially in a low-speed state. Based on the description of dynamic and static models of a nonlinear Stribeck friction model, this paper puts forward sliding mode controller to overcome the friction, whose stability is展开更多
Although conventional model reference adaptive control （MRAC） achieves good tracking performance for cylinder control, the controller structure is much more complicated and has less robustness to disturbance in real...Although conventional model reference adaptive control （MRAC） achieves good tracking performance for cylinder control, the controller structure is much more complicated and has less robustness to disturbance in real applications. This paper discusses the use of simple adaptive control （SAC） for positioning a water hydraulic servo cylinder system. Compared with MRAC, SAC has a simpler and lower order structure, i.e., higher feasibility. The control performance of SAC is examined and evaluated on a water hydraulic servo cylinder system. With the recent increased concerns over global environmental problems, the water hydraulic technique using pure tap water as a pressure medium has become a new drive source comparable to electric, oil hydraulic, and pneumatic drive systems. This technique is also preferred because of its high power density, high safety against fire hazards in production plants, and easy availability. However, the main problems for precise control in a water hydraulic system are steady state errors and overshoot due to its large friction torque and considerable leakage flow. MRAC has been already applied to compensate for these effects, and better control performances have been obtained. However, there have been no reports on the application of SAC for water hydraulics. To make clear the merits of SAC, the tracking control performance and robustness are discussed based on experimental results. SAC is confirmed to give better tracking performance compared with PI control, and a control precision comparable to MRAC （within 10 μm of the reference position） and higher robustness to parameter change, despite the simple controller. The research results ensure a wider application of simple adaptive control in real mechanical systems.展开更多
Attitude control system is one of the most important subsystems in a spacecraft.As a key actuator,the control moment gyroscope(CMG)mainly determines the performance of attitude control system.Whereas,the control accur...Attitude control system is one of the most important subsystems in a spacecraft.As a key actuator,the control moment gyroscope(CMG)mainly determines the performance of attitude control system.Whereas,the control accuracy and output torque smoothness of the CMG depends more on its gimbal servo system.Considering the constraints of size,mass and power consumption for a small satellite,here,a mini-CMG is designed,in which the gimbal servo system is driven by an ultrasonic motor.The good performances of the CMG are obtained by both the ultrasonic motor and the rotary inductosyn.The direct drive of gimbal improves its dynamic performance,with the output bandwidth above 20 Hz.The angular and speed closed-loop control obtains the 0.02°/s gimbal rate,and the output torque resolution better than 2×10^(-3) N·m.The ultrasonic motor provides 1.0N·m self-lock torque during power-off,with 12arc-second position accuracy.展开更多
An AC servo system based on neuron control theory is presented. Experimental results show that the neuralcontrol mode doesn't need the Precise model of the system, therefore, it has many advantages, such as simple...An AC servo system based on neuron control theory is presented. Experimental results show that the neuralcontrol mode doesn't need the Precise model of the system, therefore, it has many advantages, such as simple designand high response performance. The simulation research of the AC servo system which is non-linear, time-varied.based on neuro-fuzzy controller is done. The results of the simulation show that the performances of the system areconsiderably improved and it is one of the novel pathways to realize intelligent control of servo system.展开更多
In this paper,a hybrid adaptive compensation control scheme is proposed to compensate the friction occurrence and other nonlinear disturbance factors that exist in the high-precision servo system.An adaptive compensat...In this paper,a hybrid adaptive compensation control scheme is proposed to compensate the friction occurrence and other nonlinear disturbance factors that exist in the high-precision servo system.An adaptive compensation controller with a dual-observer structure is designed,while the LuGre dynamic friction model with non-uniform parametric uncertainties characterizes the friction torque.Considering the influence of the periodic disturbance torque and parametric uncertainties,fuzzy systems and a robust term are employed.In this way,the whole system can be treated as a simple linear model after being compensated,then the proportional-derivative (PD) control law is applied to enhancing the control performance.On the basis of Lyapunov stability theory,the global stability and the asymptotic convergence of the tracking error are proved.Numerical simulations demonstrate that the proposed scheme has potentials to restrain the impact of disturbance and improving the tracking performance.展开更多
In this paper, a novel control law is presented, which uses neural-network techniques to approximate the affine class nonlinear system having unknown or uncertain dynamics and noise disturbances. It adopts an adaptive...In this paper, a novel control law is presented, which uses neural-network techniques to approximate the affine class nonlinear system having unknown or uncertain dynamics and noise disturbances. It adopts an adaptive control law to adjust the network parameters online and adds another control component according to H-infinity control theory to attenuate the disturbance. This control law is applied to the position tracking control of pneumatic servo systems. Simulation and experimental results show that the tracking precision and convergence speed is obviously superior to the results by using the basic BP-network controller and self-tuning adaptive controller.展开更多
A novel design method for determining the proportional-integral-derivative(PID) controller gains of an anti-aircraft artillery servo system with multiple performance specifications based on a particle swarm optimizati...A novel design method for determining the proportional-integral-derivative(PID) controller gains of an anti-aircraft artillery servo system with multiple performance specifications based on a particle swarm optimization (PSO) algorithm is proposed. First, a performance criterion evolution function combined with the system maximum displacement settling time, rise time, overshoot, steady state error, constant velocity tracking error and sine wave tracking error is defined. Second, the optimization problem of PID controller parameters and the searching procedure of PSO algorithm are constructed. Finally, the optimal or near optimal PID controller parameters are fast and easily obtained by solving the above optimization problem on the given controller parameter space following the PSO searching procedure. The simulation results show the effectiveness of the proposed controllers.展开更多
With the price decreasing of the pneumatic proportional valve and the high performance micro controller, the simple structure and high tracking performance pneumatic servo system demonstrates more application potentia...With the price decreasing of the pneumatic proportional valve and the high performance micro controller, the simple structure and high tracking performance pneumatic servo system demonstrates more application potential in many fields. However, most existing control methods with high tracking performance need to know the model information and to use pressure sensor. This limits the application of the pneumatic servo system. An adaptive backstepping slide mode control method is proposed for pneumatic position servo system. The proposed method designs adaptive slide mode controller using backstepping design technique. The controller parameter adaptive law is derived from Lyapunov analysis to guarantee the stability of the system. A theorem is testified to show that the state of closed-loop system is uniformly bounded, and the closed-loop system is stable. The advantages of the proposed method include that system dynamic model parameters are not required for the controller design, uncertain parameters bounds are not need, and the bulk and expensive pressure sensor is not needed as well. Experimental performance, as compared with some existing methods. results show that the designed controller can achieve better tracking展开更多
To achieve fast, smooth and accurate set point tracking in servo positioning systems, a parameterized design of nonlinear feedback controllers is presented, based on a so-called composite nonlinear feedback （CNF） co...To achieve fast, smooth and accurate set point tracking in servo positioning systems, a parameterized design of nonlinear feedback controllers is presented, based on a so-called composite nonlinear feedback （CNF） control technique. The controller designed here consists of a linear feedback part and a nonlinear part. The linear part is responsible for stability and fast response of the closed-loop system. The nonlinear part serves to increase the damping ratio of closed-loop poles as the controlled output approaches the target reference. The CNF control brings together the good points of both the small and the large damping ratio cases, by continuously scheduling the damping ratio of the dominant closed-loop poles and thus has the capability for superior transient performance, i.e. a fast output response with low overshoot. In the presence of constant disturbances, an integral action is included so as to remove the static bias. An explicitly parameterized controller is derived for servo positioning systems characterized by second-order model. Practical application in a micro hard disk drive servo system is then presented, together with some discussion of the rationale and characteristics of such design. Simulation and experimental results demonstrate the effectiveness of this control design methodology.展开更多
An application of fuzzy logic in brushess servo system is presented. FLC(fuzzy logic control)provides a control strategy regarding to uncertain model, so it has certain robustness. The proposed method improves the rob...An application of fuzzy logic in brushess servo system is presented. FLC(fuzzy logic control)provides a control strategy regarding to uncertain model, so it has certain robustness. The proposed method improves the robust performance of the system, so as to suppress rapidly the state error caused by both parameter variation and forced disturbance. In order to optimize the characteristic of the FLC, PID and on-line adaptive controls are applied. Experiments show that the proposed method is effective.展开更多
The paper presents an output feedback controller design method for high-order servo system with the constraints of multiple indices by using satisfactory control theory. The control strategy is to convert transfer-fun...The paper presents an output feedback controller design method for high-order servo system with the constraints of multiple indices by using satisfactory control theory. The control strategy is to convert transfer-function form of two-loop servo system into state-space form and assign the system poles in the specified region and H_∞ attenuation degree in the given range with the Riccati matrix inequality so that the closed-loop system has good dynamics and robust quality. A numeric example is given to show the effectiveness of the proposed approach.展开更多
文摘A proportional integral derivative （PID） controller is designed and attached to electro-hydraulic servo actuator system （EHSAS） to control the angular position of the rotary actuator which control the movable surface of space vehicles. The PID gain parameters are optimized by the genetic algorithm （GA）. The controller is verified on the new state-space model of servo-valves attached to the physical rotary actuator by SIMULINK program. The controller and the state-space model are verified experimentally. Simulation and experimental results verify the effectiveness of the PID controller adaptive by GA to control the angular position of the rotary actuator as compared with the classical PID controller and the compensator controller.
文摘Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varieties of PWM modulation methods, and concludes on the relationship between dithers and the different methods, and then discusses the influence of friction to the dithers. Results from experiments regarding the dynamic and static responses on the given system support the theories presented.
文摘The angular position controller is system （EHSAS） to control the output of the rotary applied to electro-hydraulic servo actuator actuator. It works as a compensator based on the frequency response of the EHSAS. Its design model is verified on the state-space model of EHSAS by using simulation program SIMULINK. Real data used to test the system. Simulation results give a good agreement for the controller and also for the state-space model.
文摘An ultra-precision servo control system for MWEDM (micro wire electrical discharge machining) based on piezoelectric ceramic motor drivers was developed. The servo discharge detection adopts an average voltage detection method, utilizes statistical methods to analyze the measured data, then controls discharge gap and makes the process more stable. The servo feed system based on DSP microprocessors applies a PID controller with incomplete derivation to reduce overshoot to improve machining accuracy, and also adopts adaptive dead-zone inverse compensation to eliminate dead-zone caused by piezoelectric ceramic motions in low servo feed speed. The simulation results show that the methods proposed in this paper can make the system recover its linearity and converge the dead-zone parameters. It is proved that the method proposed is efficient in solving this problem. Cooperating with a micro energy pulse generator, this equipment’s machining accuracy is smaller than ±0.2 micron, and surface roughness Ra is less than 0.1 micron. Punch die and cavity die (micro gear die, module 100 micron, thickness 3.5 millimeter) have been machined independently in two die steel work-pieces. These pieces can mate very well to work, which shows that the servo control system satisfies the need of MWEDM for high precision micro fabrication.
文摘The reliability and robustness of the electro-hydraulic servo control system for heavy-duty forging machine play an important role in forging processes. A mathematic model of 50 MN water press for free forging was created in this research. The dynamic robust compensator integrating with PID control method is designed and applied to the mathematical model simulation. The simulated results approved that the dynamic robust compensator application restrains interference from extra load and improves the electro-hydraulic position servo control system accuracy and stability.
基金supported in part by the Nation Natural Science Foundation of China under Grant No.52175099China Postdoctoral Science Foundation under Grant No.2020M671494Jiangsu Planned Projects for Postdoctoral Research Funds under Grant No.2020Z179。
文摘A tracking stability control problem for the vertical electric stabilization system of moving tank based on adaptive robust servo control is addressed.This paper mainly focuses on two types of possibly fast timevarying but bounded uncertainty within the vertical electric stabilization system:model parameter uncertainty and uncertain nonlinearity.First,the vertical electric stabilization system is constructed as an uncertain nonlinear dynamic system that can reflect the practical mechanics transfer process of the system.Second,the dynamical equation in the form of state space is established by designing the angular tracking error.Third,the comprehensive parameter of system uncertainty is designed to estimate the most conservative effects of uncertainty.Finally,an adaptive robust servo control which can effectively handle the combined effects of complex nonlinearity and uncertainty is proposed.The feasibility of the proposed control strategy under the practical physical condition is validated through the tests on the experimental platform.This paper pioneers the introduction of the internal nonlinearity and uncertainty of the vertical electric stabilization system into the settlement of the tracking stability control problem,and validates the advanced servo control strategy through experiment for the first time.
基金Item Sponsored by National Development and Reform Commission Tech-Industry Project Foundation of China(High-Tech1899)
文摘A novel electro-hydraulic servo control algorithm was introduced. The primary idea of this algorithm was to combine the notion of model prediction with the generic model control （GMC）. The performance of the GMC al- gorithm was improved by receding optimization and feedback correction. By the predictive model of output errors of an electro-hydraulic servo control system based on the improved weighted least square support vector machines （WLS-SVM） to forecast and compensate the future sequence errors, the control precision and robustness were im- proved. The improved GMC based on the improved WLS-SVM was applied to an electro-hydraulic servo control sys- tem for hot strip rolling control systems. The simulation results showed the feasibility and effectiveness of the pres- ent algorithm.
基金Project(2007AA04Z144) supported by the National High-Tech Research and Development Program of ChinaProject(2007421119) supported by the China Postdoctoral Science Foundation
文摘A new kind of volume control hydraulic press that combines the advantages of both hydraulic and SRM(switched reluctance motor) driving technology is developed.Considering that the serious dead zone and time-variant nonlinearity exist in the volume control electro-hydraulic servo system,the ILC(iterative learning control) method is applied to tracking the displacement curve of the hydraulic press slider.In order to improve the convergence speed and precision of ILC,a fuzzy ILC algorithm that utilizes the fuzzy strategy to adaptively adjust the iterative learning gains is put forward.The simulation and experimental researches are carried out to investigate the convergence speed and precision of the fuzzy ILC for hydraulic press slider position tracking.The results show that the fuzzy ILC can raise the iterative learning speed enormously,and realize the tracking control of slider displacement curve with rapid response speed and high control precision.In experiment,the maximum tracking error 0.02 V is achieved through 12 iterations only.
基金This work was supported by the National Natural Science Foundation of China(No.62022061)Tianjin Natural Science Foundation(No.20JCYBJC00880)Beijing Key Laboratory Open Fund of Long-Life Technology of Precise Rotation and Transmission Mechanisms.
文摘Single gimbal control moment gyroscope(SGCMG)with high precision and fast response is an important attitude control system for high precision docking,rapid maneuvering navigation and guidance system in the aerospace field.In this paper,considering the influence of multi-source disturbance,a data-based feedback relearning(FR)algorithm is designed for the robust control of SGCMG gimbal servo system.Based on adaptive dynamic programming and least-square principle,the FR algorithm is used to obtain the servo control strategy by collecting the online operation data of SGCMG system.This is a model-free learning strategy in which no prior knowledge of the SGCMG model is required.Then,combining the reinforcement learning mechanism,the servo control strategy is interacted with system dynamic of SGCMG.The adaptive evaluation and improvement of servo control strategy against the multi-source disturbance are realized.Meanwhile,a data redistribution method based on experience replay is designed to reduce data correlation to improve algorithm stability and data utilization efficiency.Finally,by comparing with other methods on the simulation model of SGCMG,the effectiveness of the proposed servo control strategy is verified.
基金This project was supported by the Aeronautics Foundation of China (00E21022).
文摘Flight simulator is an important device and a typical high-performance position and speed servo system used in the hardware-in-the-loop simulation of flight control system. Friction is the main nonlinear resistance in the flight simulator servo system, especially in a low-speed state. Based on the description of dynamic and static models of a nonlinear Stribeck friction model, this paper puts forward sliding mode controller to overcome the friction, whose stability is
文摘Although conventional model reference adaptive control （MRAC） achieves good tracking performance for cylinder control, the controller structure is much more complicated and has less robustness to disturbance in real applications. This paper discusses the use of simple adaptive control （SAC） for positioning a water hydraulic servo cylinder system. Compared with MRAC, SAC has a simpler and lower order structure, i.e., higher feasibility. The control performance of SAC is examined and evaluated on a water hydraulic servo cylinder system. With the recent increased concerns over global environmental problems, the water hydraulic technique using pure tap water as a pressure medium has become a new drive source comparable to electric, oil hydraulic, and pneumatic drive systems. This technique is also preferred because of its high power density, high safety against fire hazards in production plants, and easy availability. However, the main problems for precise control in a water hydraulic system are steady state errors and overshoot due to its large friction torque and considerable leakage flow. MRAC has been already applied to compensate for these effects, and better control performances have been obtained. However, there have been no reports on the application of SAC for water hydraulics. To make clear the merits of SAC, the tracking control performance and robustness are discussed based on experimental results. SAC is confirmed to give better tracking performance compared with PI control, and a control precision comparable to MRAC （within 10 μm of the reference position） and higher robustness to parameter change, despite the simple controller. The research results ensure a wider application of simple adaptive control in real mechanical systems.
基金supported by the National Natural Science Foundation of China(No.51575260)the Fundamental Research Funds for the Central Universities(No.NJ20160001)
文摘Attitude control system is one of the most important subsystems in a spacecraft.As a key actuator,the control moment gyroscope(CMG)mainly determines the performance of attitude control system.Whereas,the control accuracy and output torque smoothness of the CMG depends more on its gimbal servo system.Considering the constraints of size,mass and power consumption for a small satellite,here,a mini-CMG is designed,in which the gimbal servo system is driven by an ultrasonic motor.The good performances of the CMG are obtained by both the ultrasonic motor and the rotary inductosyn.The direct drive of gimbal improves its dynamic performance,with the output bandwidth above 20 Hz.The angular and speed closed-loop control obtains the 0.02°/s gimbal rate,and the output torque resolution better than 2×10^(-3) N·m.The ultrasonic motor provides 1.0N·m self-lock torque during power-off,with 12arc-second position accuracy.
文摘An AC servo system based on neuron control theory is presented. Experimental results show that the neuralcontrol mode doesn't need the Precise model of the system, therefore, it has many advantages, such as simple designand high response performance. The simulation research of the AC servo system which is non-linear, time-varied.based on neuro-fuzzy controller is done. The results of the simulation show that the performances of the system areconsiderably improved and it is one of the novel pathways to realize intelligent control of servo system.
基金Supported by Aeronautical Science Foundation of China(No.20080651016)
文摘In this paper,a hybrid adaptive compensation control scheme is proposed to compensate the friction occurrence and other nonlinear disturbance factors that exist in the high-precision servo system.An adaptive compensation controller with a dual-observer structure is designed,while the LuGre dynamic friction model with non-uniform parametric uncertainties characterizes the friction torque.Considering the influence of the periodic disturbance torque and parametric uncertainties,fuzzy systems and a robust term are employed.In this way,the whole system can be treated as a simple linear model after being compensated,then the proportional-derivative (PD) control law is applied to enhancing the control performance.On the basis of Lyapunov stability theory,the global stability and the asymptotic convergence of the tracking error are proved.Numerical simulations demonstrate that the proposed scheme has potentials to restrain the impact of disturbance and improving the tracking performance.
基金Guangdong-Hong Kong Technology Cooperation Funding Scheme (No.2005A10207005, IID 2004-0005)the Research Grants Council of Hong Kong (No.9040407)
文摘In this paper, a novel control law is presented, which uses neural-network techniques to approximate the affine class nonlinear system having unknown or uncertain dynamics and noise disturbances. It adopts an adaptive control law to adjust the network parameters online and adds another control component according to H-infinity control theory to attenuate the disturbance. This control law is applied to the position tracking control of pneumatic servo systems. Simulation and experimental results show that the tracking precision and convergence speed is obviously superior to the results by using the basic BP-network controller and self-tuning adaptive controller.
基金Sponsored by National Nature Science Foundation of China (60174028)
文摘A novel design method for determining the proportional-integral-derivative(PID) controller gains of an anti-aircraft artillery servo system with multiple performance specifications based on a particle swarm optimization (PSO) algorithm is proposed. First, a performance criterion evolution function combined with the system maximum displacement settling time, rise time, overshoot, steady state error, constant velocity tracking error and sine wave tracking error is defined. Second, the optimization problem of PID controller parameters and the searching procedure of PSO algorithm are constructed. Finally, the optimal or near optimal PID controller parameters are fast and easily obtained by solving the above optimization problem on the given controller parameter space following the PSO searching procedure. The simulation results show the effectiveness of the proposed controllers.
基金Supported by National Key Scientific and Technological Project(Grant No.2010ZX04001-051-031)Key Program of National Natural Science Foundation of China((Grant No.61533014)the Innovative Research Team of Shaanxi Province,China(Grant No.2013KCT-04)
文摘With the price decreasing of the pneumatic proportional valve and the high performance micro controller, the simple structure and high tracking performance pneumatic servo system demonstrates more application potential in many fields. However, most existing control methods with high tracking performance need to know the model information and to use pressure sensor. This limits the application of the pneumatic servo system. An adaptive backstepping slide mode control method is proposed for pneumatic position servo system. The proposed method designs adaptive slide mode controller using backstepping design technique. The controller parameter adaptive law is derived from Lyapunov analysis to guarantee the stability of the system. A theorem is testified to show that the state of closed-loop system is uniformly bounded, and the closed-loop system is stable. The advantages of the proposed method include that system dynamic model parameters are not required for the controller design, uncertain parameters bounds are not need, and the bulk and expensive pressure sensor is not needed as well. Experimental performance, as compared with some existing methods. results show that the designed controller can achieve better tracking
文摘To achieve fast, smooth and accurate set point tracking in servo positioning systems, a parameterized design of nonlinear feedback controllers is presented, based on a so-called composite nonlinear feedback （CNF） control technique. The controller designed here consists of a linear feedback part and a nonlinear part. The linear part is responsible for stability and fast response of the closed-loop system. The nonlinear part serves to increase the damping ratio of closed-loop poles as the controlled output approaches the target reference. The CNF control brings together the good points of both the small and the large damping ratio cases, by continuously scheduling the damping ratio of the dominant closed-loop poles and thus has the capability for superior transient performance, i.e. a fast output response with low overshoot. In the presence of constant disturbances, an integral action is included so as to remove the static bias. An explicitly parameterized controller is derived for servo positioning systems characterized by second-order model. Practical application in a micro hard disk drive servo system is then presented, together with some discussion of the rationale and characteristics of such design. Simulation and experimental results demonstrate the effectiveness of this control design methodology.
文摘An application of fuzzy logic in brushess servo system is presented. FLC(fuzzy logic control)provides a control strategy regarding to uncertain model, so it has certain robustness. The proposed method improves the robust performance of the system, so as to suppress rapidly the state error caused by both parameter variation and forced disturbance. In order to optimize the characteristic of the FLC, PID and on-line adaptive controls are applied. Experiments show that the proposed method is effective.
文摘The paper presents an output feedback controller design method for high-order servo system with the constraints of multiple indices by using satisfactory control theory. The control strategy is to convert transfer-function form of two-loop servo system into state-space form and assign the system poles in the specified region and H_∞ attenuation degree in the given range with the Riccati matrix inequality so that the closed-loop system has good dynamics and robust quality. A numeric example is given to show the effectiveness of the proposed approach.
