The friction and abrasion characters of yarn play veryimportant roles in the downstream processing and theend-use of products.With the development of rotoryarn and its application in the knitted products,theproblem of...The friction and abrasion characters of yarn play veryimportant roles in the downstream processing and theend-use of products.With the development of rotoryarn and its application in the knitted products,theproblem of abrasion on the machine components causedby the processed rotor yarn has been paid more andmore attentions.This paper deals with the factors effectthe abrasiveness of rotor yarn and the comparison ofabrasive character between rotor yarn and ring yarn.展开更多
In this paper, the difference of the twist insertion levels of the compact and ring spun yarns of the same count is analyzed based on the relationship of the yarn twist factor to the twist angle and the bulk density. ...In this paper, the difference of the twist insertion levels of the compact and ring spun yarns of the same count is analyzed based on the relationship of the yarn twist factor to the twist angle and the bulk density. It is proposed that the relationship of the twist angle, twist level, and the yarn diameter should be synthetically considered when evaluating the twist insertion level of the compact yarn. The twist angle of the compact yarn is smaller than that of the ring yarn with the same twist insertion level. This results from the ordered fiber arrangement and compact structure of the compact yarn. Experiment was conducted to verify the conclusions. It is also discovered that the selection of the twist factor of the compact yarn, which can be usually lower than that of the ring yarn by 10%-15%, can be determined based on the yarn tensile strength.展开更多
Vortex spinning is an innovative air-jet spinning technology with promising features.A comparison of the vortex and ring spun cotton yarns and their knitted fabric properties was provided to evaluate the latent capabi...Vortex spinning is an innovative air-jet spinning technology with promising features.A comparison of the vortex and ring spun cotton yarns and their knitted fabric properties was provided to evaluate the latent capability of the vortex spinning technology.The results show that the vortex yarn has better elongation,evenness and much less hairiness than the ring yarn.The vortex fabric is found to have better air permeability,bursting properties,and pilling resistance than the ring fabric,while the drapeability and abrasion resistance of the ring fabric are better than the vortex fabric.展开更多
Generally, ring spun yarns are manufactured from roving which is produced by roving frame. In this paper, an experiment has been done producing ring spun cotton yarn directly from finisher drawn sliver eliminatin...Generally, ring spun yarns are manufactured from roving which is produced by roving frame. In this paper, an experiment has been done producing ring spun cotton yarn directly from finisher drawn sliver eliminating the roving frame. Total 3 types of yarn with the various linear density of 8 Ne, 10 Ne & 12 Ne were produced using a roving frame and without using a roving frame. In the next step, physical and mechanical properties of those yarns including unevenness, imperfections, hairiness & tenacity were investigated. The result showed that ring spun cotton yarns produced from sliver exhibited inferior physical and mechanical properties compared with samples from the conventional ring spinning system.展开更多
Traditional ring spinning system is associated with the several limitations, one of which is yarn hairiness. The awareness has been vibrantly growing among the spinning mills for reducing staple yarn hairiness because...Traditional ring spinning system is associated with the several limitations, one of which is yarn hairiness. The awareness has been vibrantly growing among the spinning mills for reducing staple yarn hairiness because of its detrimental effects on the subsequent processes (i.e., weaving, knitting, dyeing etc.) and the quality of resultant textile products. As a result, modified form of ring frame has attracted a lot of attention among the researchers for making yarn with the lower level of hairiness value. Besides the raw material parameters and some processing variables, spinning triangle (ST) is the most critical region that has decisive influence on the distribution of fiber tensions and their spatial orientations and shapes in staple yarn body. Thus, using appropriate methods to control the spinning triangle geometry actively has been a vital issue in the field of yarn hairiness reduction. In this paper, it is attempted to make an overview on the spinning triangle based modifications of ring frame that have been designed and destined to reduce hairiness. However, agent aided ring spinning system has also been briefly discussed in this paper as well.展开更多
In order to improve the quality of yarn,a research was carried out at ring spinning.A modifiedtraveller has been used to reduce the yarn hairiness vastly.According to the statistical analysis ofthe data,it was found t...In order to improve the quality of yarn,a research was carried out at ring spinning.A modifiedtraveller has been used to reduce the yarn hairiness vastly.According to the statistical analysis ofthe data,it was found that the geometrical shape of travellers is the key factor affecting the yarnhairiness at ring spinning.展开更多
On the base of literature review and the analysis of yarn properties, yarn structure and some other facts, the abrasion resistance of both rotor spun yarn and ring spun yarns are discussed. The results show that with ...On the base of literature review and the analysis of yarn properties, yarn structure and some other facts, the abrasion resistance of both rotor spun yarn and ring spun yarns are discussed. The results show that with the same raw material and twist, the rotor spun yarn has lower abrasion resistance than that of ring spun yarn, because of the higher twist employed, the abrasion resistance of rotor spun yarn is higher than that of ring spun yarn.展开更多
A method of visual estimate of yarn spinning tension on worsted ring spinning frame is pro-posed. This method is based on pragmatized classical theory of spinning balloon, and is supportedby experimental data.
At present, we have succeeded in producing silk noil yarn by rotor spinning, and obtained good economic benefits. In this paper, through combining with the recent producing practice, systematically discussing and anal...At present, we have succeeded in producing silk noil yarn by rotor spinning, and obtained good economic benefits. In this paper, through combining with the recent producing practice, systematically discussing and analysing the technology in the process of producing silk noil yarn by rotor spinning, we develop the new technology which is suited to produce silk noil yarn by rotor spinning, and address several noticable problems. The conclusions have been put into practice and proved to be effective and reliable. It can be consulted by the textile mills.展开更多
The objective of this paper is to establish reliable prediction equations relating cotton fibreproperties measured by HVI system and yarn quality,A useful statistical method is adopted for de-veloping a multiple regre...The objective of this paper is to establish reliable prediction equations relating cotton fibreproperties measured by HVI system and yarn quality,A useful statistical method is adopted for de-veloping a multiple regression model interpreting the relation between the data of Spinlab HVIfibre properties and quality parameters of yarn STQ (Strength Tex Quotient).The percent relativecontribution of a fibre property with respect of STQ is also assessed.The results show that the totalcontribution of the HVI measured fibre properties can account for 77.4% of known variation ofyarn STQ.The main feature of the approach is its flexibility in accommodating all fibre properties.The examination of regression equation showed that it could be well applied to predict STQ ofyarns spun from the same spinning system,but,for different spinning systems and also for yarns ofdifferent linear density,modification of the equation would be needed.展开更多
By studying the variations of balloon height and of wind-ing radius in any one winding layer of ring spinning, the formula for determining the winding tension in any layer is derived, and then the overall tension vari...By studying the variations of balloon height and of wind-ing radius in any one winding layer of ring spinning, the formula for determining the winding tension in any layer is derived, and then the overall tension variation throughout all winding layers can be computed. A meth-od of measuring the winding tension is also introduced here, with the measured results agreeing with the com-puted ones, and so the reliable relationship between winding tension, speed and ring traveller weight can be thus obtained. The highest allowable spindle speed is also discussed.展开更多
The technique of sirospun process is applied on a modified semi-worsted balloonless spinningframe to investigate the effect of spindle-speed,yarn-twist and strand-spacing on yarn properties.Yarn breaking strength,brea...The technique of sirospun process is applied on a modified semi-worsted balloonless spinningframe to investigate the effect of spindle-speed,yarn-twist and strand-spacing on yarn properties.Yarn breaking strength,breaking extension,evenness and imperfection are examined on the basisof CCD experimental design.Yarn hairiness is particularly concerned,being found that all spinningparameters tested have significant effects on hairiness and that the minimum number of hairs oc-curs at the strand-spacing of 14.4 mm.Compared to conventional single spun yarn,experimentshave revealed the greatest advantage of using sirospun process is that all sirospun yarns have muchless hairiness.A new sirospun yarn fault,so called“loop”,has also been examined.The most likely cause forthis yarn fault is the strand-tension unbalance between the two strands when low tension spinningis applied.Further analysis and some initial tests have been carried out in the hope of overcomingthis loop fault which is an important obstacle to the application of balloonless spinning.展开更多
文摘The friction and abrasion characters of yarn play veryimportant roles in the downstream processing and theend-use of products.With the development of rotoryarn and its application in the knitted products,theproblem of abrasion on the machine components causedby the processed rotor yarn has been paid more andmore attentions.This paper deals with the factors effectthe abrasiveness of rotor yarn and the comparison ofabrasive character between rotor yarn and ring yarn.
基金Key Project of Chinese Ministry of Education(No.108057)
文摘In this paper, the difference of the twist insertion levels of the compact and ring spun yarns of the same count is analyzed based on the relationship of the yarn twist factor to the twist angle and the bulk density. It is proposed that the relationship of the twist angle, twist level, and the yarn diameter should be synthetically considered when evaluating the twist insertion level of the compact yarn. The twist angle of the compact yarn is smaller than that of the ring yarn with the same twist insertion level. This results from the ordered fiber arrangement and compact structure of the compact yarn. Experiment was conducted to verify the conclusions. It is also discovered that the selection of the twist factor of the compact yarn, which can be usually lower than that of the ring yarn by 10%-15%, can be determined based on the yarn tensile strength.
基金National Natural Science Foundation of China(No.51076026)Natural Science Foundation of Shanghai,China(No.12ZR1440300)the Fundamental Research Funds for the Central Universities of China
文摘Vortex spinning is an innovative air-jet spinning technology with promising features.A comparison of the vortex and ring spun cotton yarns and their knitted fabric properties was provided to evaluate the latent capability of the vortex spinning technology.The results show that the vortex yarn has better elongation,evenness and much less hairiness than the ring yarn.The vortex fabric is found to have better air permeability,bursting properties,and pilling resistance than the ring fabric,while the drapeability and abrasion resistance of the ring fabric are better than the vortex fabric.
文摘Generally, ring spun yarns are manufactured from roving which is produced by roving frame. In this paper, an experiment has been done producing ring spun cotton yarn directly from finisher drawn sliver eliminating the roving frame. Total 3 types of yarn with the various linear density of 8 Ne, 10 Ne & 12 Ne were produced using a roving frame and without using a roving frame. In the next step, physical and mechanical properties of those yarns including unevenness, imperfections, hairiness & tenacity were investigated. The result showed that ring spun cotton yarns produced from sliver exhibited inferior physical and mechanical properties compared with samples from the conventional ring spinning system.
文摘Traditional ring spinning system is associated with the several limitations, one of which is yarn hairiness. The awareness has been vibrantly growing among the spinning mills for reducing staple yarn hairiness because of its detrimental effects on the subsequent processes (i.e., weaving, knitting, dyeing etc.) and the quality of resultant textile products. As a result, modified form of ring frame has attracted a lot of attention among the researchers for making yarn with the lower level of hairiness value. Besides the raw material parameters and some processing variables, spinning triangle (ST) is the most critical region that has decisive influence on the distribution of fiber tensions and their spatial orientations and shapes in staple yarn body. Thus, using appropriate methods to control the spinning triangle geometry actively has been a vital issue in the field of yarn hairiness reduction. In this paper, it is attempted to make an overview on the spinning triangle based modifications of ring frame that have been designed and destined to reduce hairiness. However, agent aided ring spinning system has also been briefly discussed in this paper as well.
文摘In order to improve the quality of yarn,a research was carried out at ring spinning.A modifiedtraveller has been used to reduce the yarn hairiness vastly.According to the statistical analysis ofthe data,it was found that the geometrical shape of travellers is the key factor affecting the yarnhairiness at ring spinning.
文摘On the base of literature review and the analysis of yarn properties, yarn structure and some other facts, the abrasion resistance of both rotor spun yarn and ring spun yarns are discussed. The results show that with the same raw material and twist, the rotor spun yarn has lower abrasion resistance than that of ring spun yarn, because of the higher twist employed, the abrasion resistance of rotor spun yarn is higher than that of ring spun yarn.
文摘A method of visual estimate of yarn spinning tension on worsted ring spinning frame is pro-posed. This method is based on pragmatized classical theory of spinning balloon, and is supportedby experimental data.
文摘At present, we have succeeded in producing silk noil yarn by rotor spinning, and obtained good economic benefits. In this paper, through combining with the recent producing practice, systematically discussing and analysing the technology in the process of producing silk noil yarn by rotor spinning, we develop the new technology which is suited to produce silk noil yarn by rotor spinning, and address several noticable problems. The conclusions have been put into practice and proved to be effective and reliable. It can be consulted by the textile mills.
文摘The objective of this paper is to establish reliable prediction equations relating cotton fibreproperties measured by HVI system and yarn quality,A useful statistical method is adopted for de-veloping a multiple regression model interpreting the relation between the data of Spinlab HVIfibre properties and quality parameters of yarn STQ (Strength Tex Quotient).The percent relativecontribution of a fibre property with respect of STQ is also assessed.The results show that the totalcontribution of the HVI measured fibre properties can account for 77.4% of known variation ofyarn STQ.The main feature of the approach is its flexibility in accommodating all fibre properties.The examination of regression equation showed that it could be well applied to predict STQ ofyarns spun from the same spinning system,but,for different spinning systems and also for yarns ofdifferent linear density,modification of the equation would be needed.
文摘By studying the variations of balloon height and of wind-ing radius in any one winding layer of ring spinning, the formula for determining the winding tension in any layer is derived, and then the overall tension variation throughout all winding layers can be computed. A meth-od of measuring the winding tension is also introduced here, with the measured results agreeing with the com-puted ones, and so the reliable relationship between winding tension, speed and ring traveller weight can be thus obtained. The highest allowable spindle speed is also discussed.
文摘The technique of sirospun process is applied on a modified semi-worsted balloonless spinningframe to investigate the effect of spindle-speed,yarn-twist and strand-spacing on yarn properties.Yarn breaking strength,breaking extension,evenness and imperfection are examined on the basisof CCD experimental design.Yarn hairiness is particularly concerned,being found that all spinningparameters tested have significant effects on hairiness and that the minimum number of hairs oc-curs at the strand-spacing of 14.4 mm.Compared to conventional single spun yarn,experimentshave revealed the greatest advantage of using sirospun process is that all sirospun yarns have muchless hairiness.A new sirospun yarn fault,so called“loop”,has also been examined.The most likely cause forthis yarn fault is the strand-tension unbalance between the two strands when low tension spinningis applied.Further analysis and some initial tests have been carried out in the hope of overcomingthis loop fault which is an important obstacle to the application of balloonless spinning.
