Aqueous zinc-ion batteries possess substantial potential for energy storage applications;however,they are hampered by challenges such as dendrite formation and uncontrolled side reactions occurring at the zinc anode.I...Aqueous zinc-ion batteries possess substantial potential for energy storage applications;however,they are hampered by challenges such as dendrite formation and uncontrolled side reactions occurring at the zinc anode.In our investigation,we sought to mitigate these issues through the utilization of in situ zinc complex formation reactions to engineer hydrophobic protective layers on the zinc anode surface.These robust interfacial layers serve as effective barriers,isolating the zinc anode from the electrolyte and active water molecules and thereby preventing hydrogen evolution and the generation of undesirable byproducts.Additionally,the presence of numerous zincophilic sites within these protective layers facilitates uniform zinc deposition while concurrently inhibiting dendrite growth.Through comprehensive evaluation of functional anodes featuring diverse functional groups and alkyl chain lengths,we meticulously scrutinized the underlying mechanisms influencing performance variations.This analysis involved precise modulation of interfacial hydrophobicity,rapid Zn^(2+)ion transport,and ordered deposition of Zn^(2+)ions.Notably,the optimized anode,fabricated with octadecylphosphate(OPA),demonstrated exceptional performance characteristics.The Zn//Zn symmetric cell exhibited remarkable longevity,exceeding 4000 h under a current density of 2 mA cm^(-2)and a capacity density of 2 mA h cm^(-2),Furthermore,when integrated with a VOH cathode,the complete cell exhibited superior capacity retention compared to anodes modified with alternative organic molecules.展开更多
In order to solve coal and gas outbursts during mining coal seam,studying on related problems were carried out. According to the theories of mining upper protective layer,proper mining plan were designed and performed...In order to solve coal and gas outbursts during mining coal seam,studying on related problems were carried out. According to the theories of mining upper protective layer,proper mining plan were designed and performed through field experiment. By means of examining several parameters obtained from the field experiment,the protective effects were evaluated and the protective scope and related parameters were determined. The results of field experiment show that the danger of outbursts was evidently eliminated and the method of mining protective layers is effective and the safety and economic benefits are remarkable. The research has really applied worth and will give beneficial references to mining area with analogous conditions.展开更多
Aiming at the limitation of the traditional method for determination of protection region, combined with the actual situation of a mine, a new method for determination of protection region was put forward （including ...Aiming at the limitation of the traditional method for determination of protection region, combined with the actual situation of a mine, a new method for determination of protection region was put forward （including the protection of working face layout and development direction）, that is, gas flow observation analysis on the spot and gas content contrast method. The protection region was determined by gas flow observation analysis, gas content contrast, and computer numerical simulation combined with engineering practice. In the process of gas content test, the fixed sampling method ＂big hole drill reaming, small orifice drill rod connected with core tube＂ was employed. The results show that the determined protection region is in accordance with the actual site situation. The fixed sampling method ensures the accuracy of gas measurement of gas content.展开更多
In order to understand the effect of mining height and floor lithology at the upper protective layer face on the pressure relief of protected coal seams, this paper uses a numerical simulation method to model the pres...In order to understand the effect of mining height and floor lithology at the upper protective layer face on the pressure relief of protected coal seams, this paper uses a numerical simulation method to model the pressure changes at protected coal seam during mining upper protective layer. The results show that the taller the mining height at the upper protective layer face, the greater the protection on protected coal seam due to the higher level of pressure release; the upper protective layer face with hard rock floor impedes the pressure release at the protected coal seam, which affects the overall effect of the pressure release at protected coal seam using the protective layer mining method.展开更多
In order to prevent coal and methane outbursts, mining protective layers is an effective means, yet no precedents of mining multiple protective layers is discoveried in seams which includes several seams are prone to ...In order to prevent coal and methane outbursts, mining protective layers is an effective means, yet no precedents of mining multiple protective layers is discoveried in seams which includes several seams are prone to outburst like Xinzhuangzi Mine. This paper perfected the related theories through analyzing mining multiple upper protective layers. By means of examining several parameters, it synthetically analyzed and ascer- tains the protected effectiveness and scope and reasonable parameters, finally obtained the specific indexes and effectiveness of mining multiple protective layers in coal seams cluster.展开更多
Silicon(Si)has been attracting extensive attention for rechargeable lithium(Li)‐ion batteries due to its high theoretical capacity and low potential vs Li/Li+.However,it remains challenging and problematic to stabili...Silicon(Si)has been attracting extensive attention for rechargeable lithium(Li)‐ion batteries due to its high theoretical capacity and low potential vs Li/Li+.However,it remains challenging and problematic to stabilize the Si materials during electrochemical cycling because of the huge volume expansion,which results in losing electric contact and pulverization of Si particles.Consequently,the Si anode materials generally suffer from poor cycling,poor rate performance,and low coulomb efficiency,preventing them from practical applications.Up‐to‐date,there are numerous reports on the engineering of Si anode materials at microscale and nanoscale with significantly improved electrochemical performances.In this review,we will concentrate on various precisely designed protective layers for silicon‐based materials,including carbon layers,inorganic layers,and conductive polymer protective layer.First,we briefly introduced the alloying and failure mechanism of Si as anode materials upon electrochemical reactions.Following that,representative cases have been introduced and summarized to illustrate the purpose and advancement of protective coating layers,for instance,to alleviate pulverization and improve conductivity caused by volume expansion of Si particles during charge/discharge process,and maintain the surface stability of Si particles to form a stable solid‐electrolyte interphase layer.At last,possible strategies on the protective coating layer for stabilizing silicon anode materials that can be applied in the future have been indicated.展开更多
Over the years,zinc-ion batteries(ZIBs)have attracted attention as a promising next-generation energy storage technology because of their excellent safety,long cycling performance,eco-friendliness,and high-power densi...Over the years,zinc-ion batteries(ZIBs)have attracted attention as a promising next-generation energy storage technology because of their excellent safety,long cycling performance,eco-friendliness,and high-power density.However,issues,such as the corrosion and dissolution of the Zn anode,limited wet-tability,and lack of sufficient nucleation sites for Zn plating,have limited their practical application.The introduction of a protective layer comprising of tellurium(Te)nanobelts onto the surface of Zn anode has emerged as a promising approach to overcome these limitations and improve the electrochemical behav-ior by enhancing the safety and wettability of ZIBs,as well as providing numerous nucleation sites for Zn plating.In the presence of a Te-based protective layer,the energy power density of the surface-engineered Zn anode improved significantly(ranging from 310 to 144 W h kg^(-1),over a power density range of 270 to 1,800 W kg^(-1)),and the lifespan capability was extended.These results demonstrate that the proposed strategy of employing Te nanobelts as a protective layer holds great promise for enhancing the energy storage performance of zIBs,making them even more attractive as a viable energy storage solution forthefuture.展开更多
The thermodynamic instability of zinc anodes in aqueous electrolytes leads to issues such as corrosion,hydrogen evolution reactions(HER), and dendrite growth, severely hindering the practical application of zinc-based...The thermodynamic instability of zinc anodes in aqueous electrolytes leads to issues such as corrosion,hydrogen evolution reactions(HER), and dendrite growth, severely hindering the practical application of zinc-based aqueous energy storage devices. To address these challenges, this work proposes a dualfunction zinc anode protective layer, composed of Zn-Al-In layered double oxides(ILDO) by rationally designing Zn-Al layered double hydroxides(Zn-Al LDHs) for the first time. Differing from previous works on the LDHs coatings, firstly, the ILDO layer accelerates zinc-ion desolvation and also captures and anchors SO_(4)^(2-). Secondly, the in-situ formation of the Zn-In alloy phase effectively lowers the nucleation energy barrier, thereby regulating zinc nucleation. Consequently, the zinc anode with the ILDO protective layer demonstrates long-term stability exceeding 1900 h and low voltage hysteresis of 7.5 m V at 0.5 m A cm^(-2) and 0.5 m A h cm^(-2). Additionally, it significantly enhances the rate capability and cycling performance of Zn@ILDO//MnO_(2) full batteries and Zn@ILDO//activated carbon zinc-ion hybrid capacitors.This simple and effective dual-function protective layer strategy offers a promising approach for achieving high-performance zinc-ion batteries.展开更多
A variety of techniques, such as chemical analysis, scanning electron microscopy-energy dispersive spectroscopy, and X-ray diffraction, were applied to characterize the adhesion protective layer formed below the blast...A variety of techniques, such as chemical analysis, scanning electron microscopy-energy dispersive spectroscopy, and X-ray diffraction, were applied to characterize the adhesion protective layer formed below the blast furnace taphole level when a certain amount of titanium-bearing burden was used. Samples of the protective layer were extracted to identify the chemical composition, phase assemblage, andistribution. Furthermore, the formation mechanism of the protective layer was determined after clarifying the source of each componenFinally, a technical strategy was proposed for achieving a stable protective layer in the hearth. The results show that the protective layemainly exists in a bilayer form in the sidewall, namely, a titanium-bearing layer and a graphite layer. Both the layers contain the slag phaswhose major crystalline phase is magnesium melilite（Ca2Mg Si2O7） and the main source of the slag phase is coke ash. It is clearly determinethat solid particles such as graphite, Ti（C,N） and Mg Al2O4play an important role in the formation of the protective layer, and the key factofor promoting the formation of a stable protective layer is reasonable control of the evolution behavior of coke.展开更多
A long campaign life of blast furnaces is heavily linked to the existence of a protective layer in their hearths. In this work, we conducted dissection studies and investigated damage in blast furnace hearths to estim...A long campaign life of blast furnaces is heavily linked to the existence of a protective layer in their hearths. In this work, we conducted dissection studies and investigated damage in blast furnace hearths to estimate the formation mechanism of the protective layer. The results illustrate that a significant amount of graphite phase was trapped within the hearth protective layer. Furthermore, on the basis of the thermodynamic and kinetic calculations of the graphite precipitation process, a precipitation potential index related to the formation of the graphite-rich protective layer was proposed to characterize the formation ability of this layer. We determined that, under normal operating conditions, the precipitation of graphite phase ~om hot metal was thermodynamically possible. Among elements that exist in hot metal, C, Si, and P favor graphite precipitation, whereas Mn and Cr inhibit this process. Moreover, at the same hot-face temperature, an increase of carbon concentration in hot metal can shorten the precipitation time. Finally, the results suggest that measures such as reducing the hot-face tem- perature and increasing the degree of carbon saturation in hot metal are critically important to improve the precipitation potential index.展开更多
Lithium(Li)metal anodes with the high theoretical specific capacity(3860 mAh g^(-1))and most negative reduction potential(-3.04 V vs.standard hydrogen electrode)have been considered as an ultimate choice for energy st...Lithium(Li)metal anodes with the high theoretical specific capacity(3860 mAh g^(-1))and most negative reduction potential(-3.04 V vs.standard hydrogen electrode)have been considered as an ultimate choice for energy storage devices with high energy density[1-4].However,the practical applications of Li metalbased batteries(LMBs)are confronted with two tough issues:Li dendrite growth induced by uneven Li depositions and unstable solid electrolyte interphase(SEI)(Fig.1a)[5,6].展开更多
Based on the occurrence features of Group B coal-seams at a coal mine in the Huainan coal mining area, the elasto-plastic mechanical damage constitutive functions and numerical model for the protective layer excavatio...Based on the occurrence features of Group B coal-seams at a coal mine in the Huainan coal mining area, the elasto-plastic mechanical damage constitutive functions and numerical model for the protective layer excavation were established. With the UDEC2D computer program, after the upper protective layer was mined, the stress field change trends, crack development, and expansion deformation trends of underlying coal rock seams in the floor of the working face were simulated and analyzed. The simulation results show the stress changes in coal rock seams, the evolution process of pre-cracks during the process of upper protective layer mining, the caved zone and fractured zone of the underlying coal rock seams. At the same time, the results from the actual investigation and analysis of protected layer deformation match the simulation values, which verifies the validity and accuracy of numerical simulation results. The study results have an important guiding significance for gas management in low permeability and high gas coal seams with similar mining conditions.展开更多
A set of adaptable conditions classification of aquifer-protective mining in the Iongwall coalface for shallow coal seams with thin bedrock was put forward to deal with the conflict between water protection and high e...A set of adaptable conditions classification of aquifer-protective mining in the Iongwall coalface for shallow coal seams with thin bedrock was put forward to deal with the conflict between water protection and high efficiency for the mining field in west China. This classification was suitable for shallow coal seams with different thickness and was beneficial to the local environmental protection. Using the 3-Universal Distinct Element Code （3DEC） numerical software, the height of the fractured zones for shallow coal seams with thin bedrock was calculated and analyzed, and its predicting formula was achieved. Meanwhile, according to the lithology and the weathering degree of the shallow coal seam the thickness of the protective layer was determined as 10 m and the overlying water body of loose water-bearing sand for shallow coal seams with thin bedrock was divided into three types, namely, weak, medium and strong. Based on these, the necessary bedrock thickness of the Iongwall coalface for shallow coal seams with thin bedrock was confined according to the different mining height and water yield nature of the overlying loose water-bearing sand. Combined with the present mining status, a set of new methods of adaptable conditions classification of aquifer-protective mining technology in the Iongwall coalface for shallow coal seams with thin bedrock was put forward.展开更多
The visceral protective layer is a standard component of the ABTHERA<sup>TM</sup> systems for temporary abdominal closures. Nonetheless, there are circumstances where the standard, fenestrated visceral pro...The visceral protective layer is a standard component of the ABTHERA<sup>TM</sup> systems for temporary abdominal closures. Nonetheless, there are circumstances where the standard, fenestrated visceral protective layer is too large to be successfully applied into every patient’s open abdomen, such as within the abdomen of a child, smaller adult or a patient with previously placed ostomies or drains. The fenestrated, visceral protective layer may require alterations or tailoring for adequate deployment instead of placing the bulk of the visceral protective layer entirely into the open abdomen for temporary abdominal closure. This case report illustrates how the visceral protective layer can be adapted or “reimagined” to conform to a patient with unique or complex abdominal domain features when utilizing the ABTHERA<sup>TM</sup> device prior to facial closure or abdominal wall reconstruction. Photographs are utilized in a step-by-step fashion to aid the clinician in these detailed maneuvers.展开更多
The concentration difference in the near-surface region of lithium metal is the main cause of lithium dendrite growth.Resolving this issue will be key to achieving high-performance lithium metal batteries(LMBs).Herein...The concentration difference in the near-surface region of lithium metal is the main cause of lithium dendrite growth.Resolving this issue will be key to achieving high-performance lithium metal batteries(LMBs).Herein,we construct a lithium nitrate(LiNO_(3))-implanted electroactiveβphase polyvinylidene fluoride-co-hexafluoropropylene(PVDF-HFP)crystalline polymorph layer(PHL).The electronegatively charged polymer chains attain lithium ions on the surface to form lithium-ion charged channels.These channels act as reservoirs to sustainably release Li ions to recompense the ionic flux of electrolytes,decreasing the growth of lithium dendrites.The stretched molecular channels can also accelerate the transport of Li ions.The combined effects enable a high Coulombic efficiency of 97.0%for 250 cycles in lithium(Li)||copper(Cu)cell and a stable symmetric plating/stripping behavior over 2000 h at 3 mA cm^(-2)with ultrahigh Li utilization of 50%.Furthermore,the full cell coupled with PHL-Cu@Li anode and Li Fe PO_(4) cathode exhibits long-term cycle stability with high-capacity retention of 95.9%after 900 cycles.Impressively,the full cell paired with LiNi_(0.87)Co_(0.1)Mn_(0.03)O_(2)maintains a discharge capacity of 170.0 mAh g^(-1)with a capacity retention of 84.3%after 100 cycles even under harsh condition of ultralow N/P ratio of 0.83.This facile strategy will widen the potential application of LiNO_(3)in ester-based electrolyte for practical high-voltage LMBs.展开更多
With the large-scale service of lithium-ion batteries(LIBs),their failures have attracted significant attentions.While the decay of active materials is the primary cause for LIB failures,the degradation of auxiliary m...With the large-scale service of lithium-ion batteries(LIBs),their failures have attracted significant attentions.While the decay of active materials is the primary cause for LIB failures,the degradation of auxiliary materials,such as current collector corrosion,should not be disregarded.Therefore,it is necessary to conduct a comprehensive review in this field.In this review,from the perspectives of electrochemistry and materials,we systematically summarize the corrosion behavior of aluminum cathode current collector and propose corresponding countermeasures.Firstly,the corrosion type is clarified based on the properties of passivation layers in different organic electrolyte components.Furthermore,a thoroughgoing analysis is presented to examine the impact of various factors on aluminum corrosion,including lithium salts,organic solvents,water impurities,and operating conditions.Subsequently,strategies for electrolyte and protection layer employed to suppress corrosion are discussed in detail.Lastly and most importantly,we provide insights and recommendations to prevent corrosion of current collectors,facilitate the development of advanced current collectors and the implementation of next-generation high-voltage stable LIBs.展开更多
Accurate simulation of the cracking process caused by rust expansion of reinforced concrete(RC)structures plays an intuitive role in revealing the corrosion-induced failure mechanism.Considering the quasi-brittle frac...Accurate simulation of the cracking process caused by rust expansion of reinforced concrete(RC)structures plays an intuitive role in revealing the corrosion-induced failure mechanism.Considering the quasi-brittle fracture of concrete,the fracture phase field driven by the compressive-shear term is constructed and added to the traditional brittle fracture phase field model.The rationality of the proposed model is verified by a mixed fracture example under a shear displacement load.Then,the extended fracture phase model is applied to simulate the corrosion-induced cracking process of RC.The cracking patterns caused by non-uniform corrosion expansion are discussed for RC specimens with homogeneous macroscopically or heterogeneous with different polygonal aggregate distributions at the mesoscopic scale.Then,the effects of the protective layer on the crack propagation trajectory and cracking resistance are investigated,illustrating that the cracking angle and cracking resistance increase with the increase of the protective layer thickness,consistent with the experimental observation.Finally,the corrosion-induced cracking process of concrete specimens with large and small spacing rebars is simulated,and the interaction of multiple corrosion cracking is easily influenced by the reinforcement spacing,which increases with the decrease of the steel bar interval.These conclusions play an important role in the design of engineering anti-corrosion measures.The fracture phase field model can provide strong support for the life assessment of RC structures.展开更多
The electrochemical utilization of Zn anodes in aqueous batteries is hampered by the intricate and interconnected issues of Zn dendrite growth,H_(2)evolution and Zn corrosion reactions.In this study,a multifunctional ...The electrochemical utilization of Zn anodes in aqueous batteries is hampered by the intricate and interconnected issues of Zn dendrite growth,H_(2)evolution and Zn corrosion reactions.In this study,a multifunctional protective layer comprising MXene and graphitic carbon nitride(g-C_(3)N_(4))was constructed using a self-assembly strategy.The MXene/g-C_(3)N_(4)protective layer exhibited robust zincophilic characteristics,which facilitated a uniform distribution of the electric field and ensured a sufficient influx of Zn^(2+).This reduces the Zn^(2+)nucleation barrier and prevents dendrite growth.In addition,the hydrophobic nature of the protective layer,coupled with its negative charge,can repel SO_(4)^(2-)and select water molecules from the electrolyte,which aids in mitigating corrosion and H_(2)evolution.The symmetric Zn cell coated with the MXene/g-C_(3)N_(4)protective layer showed remarkable stability,achieving over 2000 h of reversible cycling at1 mA·cm^(-2).Furthermore,the MXene/g-C_(3)N_(4)-coated Zn anode paired with a sodium-doped V_(2)O_5cathode(NVO)exhibited enhanced cycling capability over 1500 cycles.展开更多
The differential cubature solution to the problem of a Mindlin plate lying on the Winkler foundation with two simply supported edges and two clamped edges was derived.Discrete numerical technology and shape functions ...The differential cubature solution to the problem of a Mindlin plate lying on the Winkler foundation with two simply supported edges and two clamped edges was derived.Discrete numerical technology and shape functions were used to ensure that the solution is suitable to irregular shaped plates.Then,the mechanical model and the solution were employed to model the protection layer that isolates the mining stopes from sea water in Sanshandao gold mine,which is the first subsea mine of China.Furthermore,thickness optimizations for the protection layers above each stope were conducted based on the maximum principle stress criterion,and the linear relations between the best protection layer thickness and the stope area under different safety factors were regressed to guide the isolation design.The method presented in this work provides a practical way to quickly design the isolation layer thickness in subsea mining.展开更多
With the increase in mining depth, the danger of coal and gas outbursts increases.In order to drain coal gas effectively and to eliminate the risk of coal and gas outbursts, we used a specific number of penetration bo...With the increase in mining depth, the danger of coal and gas outbursts increases.In order to drain coal gas effectively and to eliminate the risk of coal and gas outbursts, we used a specific number of penetration boreholes for draining of pressure relief gas.Based on the principle of overlying strata movement, deformation and pressure relief, a good effect of gas drainage was obtained.The practice in the Panyi coal mine has shown that, after mining the C11coal seam as the protective layer, the relative expansion deformation value of the protected layer C13 reached 2.63%, The permeability coefficient increased 2880 times, the gas drainage rate of the C13 coal seam increased to more than 60%, the amount of gas was reduced from 13.0 to 5.2 m3/t and the gas pressure declined from 4.4 to 0.4 MPa, which caused the danger the outbursts in the coal seams to be eliminated.The result was that we achieved a safe and highly efficient mining operation of the C13 coal seam.展开更多
基金financially supported by the Jiangsu Distinguished Professors Project (No.1711510024)the Funding for Scientific Research Startup of Jiangsu University (No.4111510015,19JDG044)+5 种基金the Jiangsu Provincial Program for High-Level Innovative and Entrepreneurial Talents Introductionthe National Natural Science Foundation of China (No.22008091)the Jiangsu Agriculture Science and Technology Innovation Fund (No.CX (21)1007)the Natural Science Foundation of Guangdong Province (2023A1515010894)the Open Project of Luzhou Key Laboratory of Fine Chemical Application Technology (HYJH-2302-A)the National Institute of Education,Singapore,under its Academic Research Fund (RI 1/21 EAH)。
文摘Aqueous zinc-ion batteries possess substantial potential for energy storage applications;however,they are hampered by challenges such as dendrite formation and uncontrolled side reactions occurring at the zinc anode.In our investigation,we sought to mitigate these issues through the utilization of in situ zinc complex formation reactions to engineer hydrophobic protective layers on the zinc anode surface.These robust interfacial layers serve as effective barriers,isolating the zinc anode from the electrolyte and active water molecules and thereby preventing hydrogen evolution and the generation of undesirable byproducts.Additionally,the presence of numerous zincophilic sites within these protective layers facilitates uniform zinc deposition while concurrently inhibiting dendrite growth.Through comprehensive evaluation of functional anodes featuring diverse functional groups and alkyl chain lengths,we meticulously scrutinized the underlying mechanisms influencing performance variations.This analysis involved precise modulation of interfacial hydrophobicity,rapid Zn^(2+)ion transport,and ordered deposition of Zn^(2+)ions.Notably,the optimized anode,fabricated with octadecylphosphate(OPA),demonstrated exceptional performance characteristics.The Zn//Zn symmetric cell exhibited remarkable longevity,exceeding 4000 h under a current density of 2 mA cm^(-2)and a capacity density of 2 mA h cm^(-2),Furthermore,when integrated with a VOH cathode,the complete cell exhibited superior capacity retention compared to anodes modified with alternative organic molecules.
文摘In order to solve coal and gas outbursts during mining coal seam,studying on related problems were carried out. According to the theories of mining upper protective layer,proper mining plan were designed and performed through field experiment. By means of examining several parameters obtained from the field experiment,the protective effects were evaluated and the protective scope and related parameters were determined. The results of field experiment show that the danger of outbursts was evidently eliminated and the method of mining protective layers is effective and the safety and economic benefits are remarkable. The research has really applied worth and will give beneficial references to mining area with analogous conditions.
文摘Aiming at the limitation of the traditional method for determination of protection region, combined with the actual situation of a mine, a new method for determination of protection region was put forward （including the protection of working face layout and development direction）, that is, gas flow observation analysis on the spot and gas content contrast method. The protection region was determined by gas flow observation analysis, gas content contrast, and computer numerical simulation combined with engineering practice. In the process of gas content test, the fixed sampling method ＂big hole drill reaming, small orifice drill rod connected with core tube＂ was employed. The results show that the determined protection region is in accordance with the actual site situation. The fixed sampling method ensures the accuracy of gas measurement of gas content.
文摘In order to understand the effect of mining height and floor lithology at the upper protective layer face on the pressure relief of protected coal seams, this paper uses a numerical simulation method to model the pressure changes at protected coal seam during mining upper protective layer. The results show that the taller the mining height at the upper protective layer face, the greater the protection on protected coal seam due to the higher level of pressure release; the upper protective layer face with hard rock floor impedes the pressure release at the protected coal seam, which affects the overall effect of the pressure release at protected coal seam using the protective layer mining method.
文摘In order to prevent coal and methane outbursts, mining protective layers is an effective means, yet no precedents of mining multiple protective layers is discoveried in seams which includes several seams are prone to outburst like Xinzhuangzi Mine. This paper perfected the related theories through analyzing mining multiple upper protective layers. By means of examining several parameters, it synthetically analyzed and ascer- tains the protected effectiveness and scope and reasonable parameters, finally obtained the specific indexes and effectiveness of mining multiple protective layers in coal seams cluster.
基金Japan Society for the Promotion of Science,Grant/Award Number:18H03869National Natural Science Foundation of China,Grant/Award Numbers:51872333,51874357。
文摘Silicon(Si)has been attracting extensive attention for rechargeable lithium(Li)‐ion batteries due to its high theoretical capacity and low potential vs Li/Li+.However,it remains challenging and problematic to stabilize the Si materials during electrochemical cycling because of the huge volume expansion,which results in losing electric contact and pulverization of Si particles.Consequently,the Si anode materials generally suffer from poor cycling,poor rate performance,and low coulomb efficiency,preventing them from practical applications.Up‐to‐date,there are numerous reports on the engineering of Si anode materials at microscale and nanoscale with significantly improved electrochemical performances.In this review,we will concentrate on various precisely designed protective layers for silicon‐based materials,including carbon layers,inorganic layers,and conductive polymer protective layer.First,we briefly introduced the alloying and failure mechanism of Si as anode materials upon electrochemical reactions.Following that,representative cases have been introduced and summarized to illustrate the purpose and advancement of protective coating layers,for instance,to alleviate pulverization and improve conductivity caused by volume expansion of Si particles during charge/discharge process,and maintain the surface stability of Si particles to form a stable solid‐electrolyte interphase layer.At last,possible strategies on the protective coating layer for stabilizing silicon anode materials that can be applied in the future have been indicated.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant funded by the Korea government(MOTIE)(RS-2023-00303581,Multiscale Simulation-Driven Development of Cost-Effective and Stable Aqueous Zn Ion Battery with Energy Density of 110 Wh/L for Energy Storage Systems:A Korea-USA Collaboration)。
文摘Over the years,zinc-ion batteries(ZIBs)have attracted attention as a promising next-generation energy storage technology because of their excellent safety,long cycling performance,eco-friendliness,and high-power density.However,issues,such as the corrosion and dissolution of the Zn anode,limited wet-tability,and lack of sufficient nucleation sites for Zn plating,have limited their practical application.The introduction of a protective layer comprising of tellurium(Te)nanobelts onto the surface of Zn anode has emerged as a promising approach to overcome these limitations and improve the electrochemical behav-ior by enhancing the safety and wettability of ZIBs,as well as providing numerous nucleation sites for Zn plating.In the presence of a Te-based protective layer,the energy power density of the surface-engineered Zn anode improved significantly(ranging from 310 to 144 W h kg^(-1),over a power density range of 270 to 1,800 W kg^(-1)),and the lifespan capability was extended.These results demonstrate that the proposed strategy of employing Te nanobelts as a protective layer holds great promise for enhancing the energy storage performance of zIBs,making them even more attractive as a viable energy storage solution forthefuture.
基金Natural Science Foundation of Hunan Province (No.2020JJ4734)High Performance Computing Center of Central South University。
文摘The thermodynamic instability of zinc anodes in aqueous electrolytes leads to issues such as corrosion,hydrogen evolution reactions(HER), and dendrite growth, severely hindering the practical application of zinc-based aqueous energy storage devices. To address these challenges, this work proposes a dualfunction zinc anode protective layer, composed of Zn-Al-In layered double oxides(ILDO) by rationally designing Zn-Al layered double hydroxides(Zn-Al LDHs) for the first time. Differing from previous works on the LDHs coatings, firstly, the ILDO layer accelerates zinc-ion desolvation and also captures and anchors SO_(4)^(2-). Secondly, the in-situ formation of the Zn-In alloy phase effectively lowers the nucleation energy barrier, thereby regulating zinc nucleation. Consequently, the zinc anode with the ILDO protective layer demonstrates long-term stability exceeding 1900 h and low voltage hysteresis of 7.5 m V at 0.5 m A cm^(-2) and 0.5 m A h cm^(-2). Additionally, it significantly enhances the rate capability and cycling performance of Zn@ILDO//MnO_(2) full batteries and Zn@ILDO//activated carbon zinc-ion hybrid capacitors.This simple and effective dual-function protective layer strategy offers a promising approach for achieving high-performance zinc-ion batteries.
基金financially supported by the Natural Science Foundation of China(No.51304014)the Natural Science Foundation of China and Baosteel(No.51134008)the National Basic Research Program of China(No.2012CB720401)
文摘A variety of techniques, such as chemical analysis, scanning electron microscopy-energy dispersive spectroscopy, and X-ray diffraction, were applied to characterize the adhesion protective layer formed below the blast furnace taphole level when a certain amount of titanium-bearing burden was used. Samples of the protective layer were extracted to identify the chemical composition, phase assemblage, andistribution. Furthermore, the formation mechanism of the protective layer was determined after clarifying the source of each componenFinally, a technical strategy was proposed for achieving a stable protective layer in the hearth. The results show that the protective layemainly exists in a bilayer form in the sidewall, namely, a titanium-bearing layer and a graphite layer. Both the layers contain the slag phaswhose major crystalline phase is magnesium melilite（Ca2Mg Si2O7） and the main source of the slag phase is coke ash. It is clearly determinethat solid particles such as graphite, Ti（C,N） and Mg Al2O4play an important role in the formation of the protective layer, and the key factofor promoting the formation of a stable protective layer is reasonable control of the evolution behavior of coke.
基金supported the National Science Foundation for Young Scientists of China (No. 51304014)the Open Foundation of the State Key Laboratory of Advanced Metallurgy (No. 41603007)
文摘A long campaign life of blast furnaces is heavily linked to the existence of a protective layer in their hearths. In this work, we conducted dissection studies and investigated damage in blast furnace hearths to estimate the formation mechanism of the protective layer. The results illustrate that a significant amount of graphite phase was trapped within the hearth protective layer. Furthermore, on the basis of the thermodynamic and kinetic calculations of the graphite precipitation process, a precipitation potential index related to the formation of the graphite-rich protective layer was proposed to characterize the formation ability of this layer. We determined that, under normal operating conditions, the precipitation of graphite phase ~om hot metal was thermodynamically possible. Among elements that exist in hot metal, C, Si, and P favor graphite precipitation, whereas Mn and Cr inhibit this process. Moreover, at the same hot-face temperature, an increase of carbon concentration in hot metal can shorten the precipitation time. Finally, the results suggest that measures such as reducing the hot-face tem- perature and increasing the degree of carbon saturation in hot metal are critically important to improve the precipitation potential index.
基金supported by National Key Research and Development Program,China(2016YFA0202500 and 2016YFA0200102)National Natural Science Foundation of China,China(21805161,21808124,U1932220)Fundamental Research Funds for the Central Universites of Central South University,China(2020zzts471)。
文摘Lithium(Li)metal anodes with the high theoretical specific capacity(3860 mAh g^(-1))and most negative reduction potential(-3.04 V vs.standard hydrogen electrode)have been considered as an ultimate choice for energy storage devices with high energy density[1-4].However,the practical applications of Li metalbased batteries(LMBs)are confronted with two tough issues:Li dendrite growth induced by uneven Li depositions and unstable solid electrolyte interphase(SEI)(Fig.1a)[5,6].
基金Supported by the National Natural Science Foundation of China （51004003） the Natural Science Foundation of Ministry of Education of Anhui Province （K J2010A091 ）
文摘Based on the occurrence features of Group B coal-seams at a coal mine in the Huainan coal mining area, the elasto-plastic mechanical damage constitutive functions and numerical model for the protective layer excavation were established. With the UDEC2D computer program, after the upper protective layer was mined, the stress field change trends, crack development, and expansion deformation trends of underlying coal rock seams in the floor of the working face were simulated and analyzed. The simulation results show the stress changes in coal rock seams, the evolution process of pre-cracks during the process of upper protective layer mining, the caved zone and fractured zone of the underlying coal rock seams. At the same time, the results from the actual investigation and analysis of protected layer deformation match the simulation values, which verifies the validity and accuracy of numerical simulation results. The study results have an important guiding significance for gas management in low permeability and high gas coal seams with similar mining conditions.
基金Supported by National Natural Science Foundation of China(50904063)the 2007 Research Fund of the State Key Laboratory of Coal Resources and Mine Safety(07KF09)Scientific Research Foundation of China University of Mining & Technology(2008A003,2005B002)
文摘A set of adaptable conditions classification of aquifer-protective mining in the Iongwall coalface for shallow coal seams with thin bedrock was put forward to deal with the conflict between water protection and high efficiency for the mining field in west China. This classification was suitable for shallow coal seams with different thickness and was beneficial to the local environmental protection. Using the 3-Universal Distinct Element Code （3DEC） numerical software, the height of the fractured zones for shallow coal seams with thin bedrock was calculated and analyzed, and its predicting formula was achieved. Meanwhile, according to the lithology and the weathering degree of the shallow coal seam the thickness of the protective layer was determined as 10 m and the overlying water body of loose water-bearing sand for shallow coal seams with thin bedrock was divided into three types, namely, weak, medium and strong. Based on these, the necessary bedrock thickness of the Iongwall coalface for shallow coal seams with thin bedrock was confined according to the different mining height and water yield nature of the overlying loose water-bearing sand. Combined with the present mining status, a set of new methods of adaptable conditions classification of aquifer-protective mining technology in the Iongwall coalface for shallow coal seams with thin bedrock was put forward.
文摘The visceral protective layer is a standard component of the ABTHERA<sup>TM</sup> systems for temporary abdominal closures. Nonetheless, there are circumstances where the standard, fenestrated visceral protective layer is too large to be successfully applied into every patient’s open abdomen, such as within the abdomen of a child, smaller adult or a patient with previously placed ostomies or drains. The fenestrated, visceral protective layer may require alterations or tailoring for adequate deployment instead of placing the bulk of the visceral protective layer entirely into the open abdomen for temporary abdominal closure. This case report illustrates how the visceral protective layer can be adapted or “reimagined” to conform to a patient with unique or complex abdominal domain features when utilizing the ABTHERA<sup>TM</sup> device prior to facial closure or abdominal wall reconstruction. Photographs are utilized in a step-by-step fashion to aid the clinician in these detailed maneuvers.
基金the financial support from the National Natural Science Foundation of China(Nos.22205191 and 52002346)the Science and Technology Innovation Program of Hunan Province(No.2021RC3109)+1 种基金the Natural Science Foundation of Hunan Province,China(No.2022JJ40446)Guangxi Key Laboratory of Low Carbon Energy Material(No.2020GXKLLCEM01)。
文摘The concentration difference in the near-surface region of lithium metal is the main cause of lithium dendrite growth.Resolving this issue will be key to achieving high-performance lithium metal batteries(LMBs).Herein,we construct a lithium nitrate(LiNO_(3))-implanted electroactiveβphase polyvinylidene fluoride-co-hexafluoropropylene(PVDF-HFP)crystalline polymorph layer(PHL).The electronegatively charged polymer chains attain lithium ions on the surface to form lithium-ion charged channels.These channels act as reservoirs to sustainably release Li ions to recompense the ionic flux of electrolytes,decreasing the growth of lithium dendrites.The stretched molecular channels can also accelerate the transport of Li ions.The combined effects enable a high Coulombic efficiency of 97.0%for 250 cycles in lithium(Li)||copper(Cu)cell and a stable symmetric plating/stripping behavior over 2000 h at 3 mA cm^(-2)with ultrahigh Li utilization of 50%.Furthermore,the full cell coupled with PHL-Cu@Li anode and Li Fe PO_(4) cathode exhibits long-term cycle stability with high-capacity retention of 95.9%after 900 cycles.Impressively,the full cell paired with LiNi_(0.87)Co_(0.1)Mn_(0.03)O_(2)maintains a discharge capacity of 170.0 mAh g^(-1)with a capacity retention of 84.3%after 100 cycles even under harsh condition of ultralow N/P ratio of 0.83.This facile strategy will widen the potential application of LiNO_(3)in ester-based electrolyte for practical high-voltage LMBs.
文摘With the large-scale service of lithium-ion batteries(LIBs),their failures have attracted significant attentions.While the decay of active materials is the primary cause for LIB failures,the degradation of auxiliary materials,such as current collector corrosion,should not be disregarded.Therefore,it is necessary to conduct a comprehensive review in this field.In this review,from the perspectives of electrochemistry and materials,we systematically summarize the corrosion behavior of aluminum cathode current collector and propose corresponding countermeasures.Firstly,the corrosion type is clarified based on the properties of passivation layers in different organic electrolyte components.Furthermore,a thoroughgoing analysis is presented to examine the impact of various factors on aluminum corrosion,including lithium salts,organic solvents,water impurities,and operating conditions.Subsequently,strategies for electrolyte and protection layer employed to suppress corrosion are discussed in detail.Lastly and most importantly,we provide insights and recommendations to prevent corrosion of current collectors,facilitate the development of advanced current collectors and the implementation of next-generation high-voltage stable LIBs.
基金the National Natural Science Foundation of China(Qing Zhang,Nos.11932006,U1934206,12172121)the Fundamental Research Funds for the Central Universities(Xin Gu,No.B210201031).
文摘Accurate simulation of the cracking process caused by rust expansion of reinforced concrete(RC)structures plays an intuitive role in revealing the corrosion-induced failure mechanism.Considering the quasi-brittle fracture of concrete,the fracture phase field driven by the compressive-shear term is constructed and added to the traditional brittle fracture phase field model.The rationality of the proposed model is verified by a mixed fracture example under a shear displacement load.Then,the extended fracture phase model is applied to simulate the corrosion-induced cracking process of RC.The cracking patterns caused by non-uniform corrosion expansion are discussed for RC specimens with homogeneous macroscopically or heterogeneous with different polygonal aggregate distributions at the mesoscopic scale.Then,the effects of the protective layer on the crack propagation trajectory and cracking resistance are investigated,illustrating that the cracking angle and cracking resistance increase with the increase of the protective layer thickness,consistent with the experimental observation.Finally,the corrosion-induced cracking process of concrete specimens with large and small spacing rebars is simulated,and the interaction of multiple corrosion cracking is easily influenced by the reinforcement spacing,which increases with the decrease of the steel bar interval.These conclusions play an important role in the design of engineering anti-corrosion measures.The fracture phase field model can provide strong support for the life assessment of RC structures.
基金financially supported by the Natural Science Foundation of Hunan Province(No.2020JJ4684)the National Natural Science Foundation of China(No.52104315)+1 种基金the Foundation for Innovative Research Groups of the National Natural Science Foundation of China(No.52121004)the Open Project of the Key Laboratory of digital flavor research of Hunan China Tobacco Industry Co.,Ltd(No.202143000834024)。
文摘The electrochemical utilization of Zn anodes in aqueous batteries is hampered by the intricate and interconnected issues of Zn dendrite growth,H_(2)evolution and Zn corrosion reactions.In this study,a multifunctional protective layer comprising MXene and graphitic carbon nitride(g-C_(3)N_(4))was constructed using a self-assembly strategy.The MXene/g-C_(3)N_(4)protective layer exhibited robust zincophilic characteristics,which facilitated a uniform distribution of the electric field and ensured a sufficient influx of Zn^(2+).This reduces the Zn^(2+)nucleation barrier and prevents dendrite growth.In addition,the hydrophobic nature of the protective layer,coupled with its negative charge,can repel SO_(4)^(2-)and select water molecules from the electrolyte,which aids in mitigating corrosion and H_(2)evolution.The symmetric Zn cell coated with the MXene/g-C_(3)N_(4)protective layer showed remarkable stability,achieving over 2000 h of reversible cycling at1 mA·cm^(-2).Furthermore,the MXene/g-C_(3)N_(4)-coated Zn anode paired with a sodium-doped V_(2)O_5cathode(NVO)exhibited enhanced cycling capability over 1500 cycles.
基金Projects(51504044,51204100)supported by National Natural Science Foundation of ChinaProject(14KF05)supported by the Research Fund of The State Key Laboratory of Coal Resources and Mine Safety,CUMT,China+3 种基金Project(cstc2016jcyj A1861)supported by the Research Fund of Chongqing Basic Science and Cutting-Edge Technology Special Projects,ChinaProject(2015CDJXY)supported by the Fundamental Research Funds for the Central UniversitiesProject supported by the China Postdoctoral Science FoundationProject(2011DA105287-MS201503)supported by the Independent Subject of State Key Laboratory of Coal Mine Disaster Dynamics and Control,China
文摘The differential cubature solution to the problem of a Mindlin plate lying on the Winkler foundation with two simply supported edges and two clamped edges was derived.Discrete numerical technology and shape functions were used to ensure that the solution is suitable to irregular shaped plates.Then,the mechanical model and the solution were employed to model the protection layer that isolates the mining stopes from sea water in Sanshandao gold mine,which is the first subsea mine of China.Furthermore,thickness optimizations for the protection layers above each stope were conducted based on the maximum principle stress criterion,and the linear relations between the best protection layer thickness and the stope area under different safety factors were regressed to guide the isolation design.The method presented in this work provides a practical way to quickly design the isolation layer thickness in subsea mining.
基金Projects 2005CB221503 supported by the National Basic Research Program of China70533050 and 50674089 by the National Natural Science Foundationof China
文摘With the increase in mining depth, the danger of coal and gas outbursts increases.In order to drain coal gas effectively and to eliminate the risk of coal and gas outbursts, we used a specific number of penetration boreholes for draining of pressure relief gas.Based on the principle of overlying strata movement, deformation and pressure relief, a good effect of gas drainage was obtained.The practice in the Panyi coal mine has shown that, after mining the C11coal seam as the protective layer, the relative expansion deformation value of the protected layer C13 reached 2.63%, The permeability coefficient increased 2880 times, the gas drainage rate of the C13 coal seam increased to more than 60%, the amount of gas was reduced from 13.0 to 5.2 m3/t and the gas pressure declined from 4.4 to 0.4 MPa, which caused the danger the outbursts in the coal seams to be eliminated.The result was that we achieved a safe and highly efficient mining operation of the C13 coal seam.
