The tunnel subjected to strike-slip fault dislocation exhibits severe and catastrophic damage.The existing analysis models frequently assume uniform fault displacement and fixed fault plane position.In contrast,post-e...The tunnel subjected to strike-slip fault dislocation exhibits severe and catastrophic damage.The existing analysis models frequently assume uniform fault displacement and fixed fault plane position.In contrast,post-earthquake observations indicate that the displacement near the fault zone is typically nonuniform,and the fault plane position is uncertain.In this study,we first established a series of improved governing equations to analyze the mechanical response of tunnels under strike-slip fault dislocation.The proposed methodology incorporated key factors such as nonuniform fault displacement and uncertain fault plane position into the governing equations,thereby significantly enhancing the applicability range and accuracy of the model.In contrast to previous analytical models,the maximum computational error has decreased from 57.1%to 1.1%.Subsequently,we conducted a rigorous validation of the proposed methodology by undertaking a comparative analysis with a 3D finite element numerical model,and the results from both approaches exhibited a high degree of qualitative and quantitative agreement with a maximum error of 9.9%.Finally,the proposed methodology was utilized to perform a parametric analysis to explore the effects of various parameters,such as fault displacement,fault zone width,fault zone strength,the ratio of maximum fault displacement of the hanging wall to the footwall,and fault plane position,on the response of tunnels subjected to strike-slip fault dislocation.The findings indicate a progressive increase in the peak internal forces of the tunnel with the rise in fault displacement and fault zone strength.Conversely,an augmentation in fault zone width is found to contribute to a decrease in the peak internal forces.For example,for a fault zone width of 10 m,the peak values of bending moment,shear force,and axial force are approximately 46.9%,102.4%,and 28.7% higher,respectively,compared to those observed for a fault zone width of 50 m.Furthermore,the position of the peak internal forces is influenced by variations in the ratio of maximum fault displacement of the hanging wall to footwall and the fault plane location,while the peak values of shear force and axial force always align with the fault plane.The maximum peak internal forces are observed when the footwall exclusively bears the entirety of the fault displacement,corresponding to a ratio of 0:1.The peak values of bending moment,shear force,and axial force for the ratio of 0:1 amount to approximately 123.8%,148.6%,and 111.1% of those for the ratio of 0.5:0.5,respectively.展开更多
An analytical solution for the responses of composite laminates under oblique low-velocity impacts is presented for a cross-ply,orthotropic,and rectangular plate under oblique low-velocity impacts.The plate is under s...An analytical solution for the responses of composite laminates under oblique low-velocity impacts is presented for a cross-ply,orthotropic,and rectangular plate under oblique low-velocity impacts.The plate is under simply-supported edge conditions,and the dynamic displacement field is expressed in a mixed form by in-plane double Fourier series and cubic polynomials through the thickness as 12 variables for each layer.A system of modified Lagrange equations is derived with all interface constraints.The Hertz and Cattaneo-Mindlin theories are used to solve for the normal and tangential contact forces during the impacts.By further discretizing in the time domain,the oblique impact problem is solved iteratively.While the numerical results clearly show the influence of impact velocity,stacking sequence,mechanical parameters,and geometric parameters,the proposed analytical approach could serve as a theoretical basis for the laminate analysis and design when it is under low-velocity impacts.展开更多
The Altyn Tagh Fault（ATF） is the longest, lithospheric scale and strike-slip fault in East Asia. In the last three decades, multidisciplinary studies focusing on the timing, displacement of strikeslip and growth mec...The Altyn Tagh Fault（ATF） is the longest, lithospheric scale and strike-slip fault in East Asia. In the last three decades, multidisciplinary studies focusing on the timing, displacement of strikeslip and growth mechanics of the ATF have made great progresses. Most studies revealed that the ATF is a sinistral strike-slip and thrust fault, which underwent multiple episodes of activation. The fault is oriented NEE with a length of 1600 km, but the direction, timing of activity and magnitude of its extension eastward are still unclear. The AFT was predominately active during the Mesozoic and Cenozoic, in relation to the Mesozoic collision of the Cimmerian continent（Qiangtang and Lhasa block） and Cenozoic collision of India with Asia. The AFT strike-slipped with a left-lateral displacement of ca. 400 km during the Cenozoic and the displacement were bigger in the western segment and stronger in the early stage of fault activation. The slip-rates in the Quaternary were bigger in the middle segment than in the western and eastern segment. We roughly estimated the Mesozoic displacement as ca. 150-300 km. The latest paleomagnetic data showed that the clockwise vertical-axis rotation did not take place in the huge basins（the Tarim and Qaidam） at both side of ATF during the Cenozoic, but the rotation happened in the small basins along the ATF. This rotation may play an important role on accommodating the tectonic deformation and displacement of the ATF. Even if we have achieved consensus for many issues related to the ATF, some issues still need to be study deeply; such as：（a） the temporal and spatial coupling relationship between the collision of Cimmerian continent with Asia and the history of AFT in the Mesozoic and（b） the tectonic deformation history which records by the sediments of the basins within and at both side of AFT and was constrained by a high-resolution and accurate chronology such as magnetostratigraphy and paleomagnetic data.展开更多
Based on 3D seismic data, the evolution mechanism and characteristics of faults were investigated to reveal the structural origin and its control on differential hydrocarbon accumulation through comprehensive analyses...Based on 3D seismic data, the evolution mechanism and characteristics of faults were investigated to reveal the structural origin and its control on differential hydrocarbon accumulation through comprehensive analyses, including structure style analysis, fault activity analysis, analogue modelling and comparison among the wells. The complex fault system with differently trending faults resulted from strike-slip and rifting in Paleogene was partly activated, developed successively and stretched obliquely by the near-NS extensional stress field in Neogene. In the area little affected by pre-existing faults, new faults nearly perpendicular to the extension direction developed. The structural development in the study area was not caused by transpressional strike slip. Under the oblique extension effect of pre-existing faults, if the angle between the strike of pre-existing fault and the extensional direction is different, the strike-slip and extensional stresses are different in ratio. The larger the angle between the two is, the stronger the extensional component, the poorer the sealing ability of the fault, and the stronger the oil and gas migration capacity will be. Conversely, the smaller the angle between the two is, the stronger the strike-slip component, the better the sealing ability of the fault, and the poorer the oil and gas migration capacity will be. The accumulation condition analysis results considering the fault trend are in good agreement with the oil and gas shows in wells drilled in this area.展开更多
Based on structural deformation analysis in the oblique Sumatra subduction system, we review uplift mechanisms of the forearc high and formation of the forearc basin. The development of the forearc high has been attri...Based on structural deformation analysis in the oblique Sumatra subduction system, we review uplift mechanisms of the forearc high and formation of the forearc basin. The development of the forearc high has been attributed to the flexural uplift, basin inversion, uplift of older accretion wedge, and backthrust in the landward margin of the accretion wedge. Observation of recently acquired seismic reflection data shows that the interplay between trenchward-vergent thrusts and arcward-vergent backthrusts has played a major role in the uplift of forearc high. The uplifted sediments on the forearc high were previously formed in a forearc basin environment. The present-day morphology of the forearc high and forearc basin is related to the uplift of the accretionary wedge and the overlying forearc basin sediments during Pliocene. Regardless of obliquity in the subduction system, the Sumatran forearc region is dominated by compression that plays an important role in forming Neogene basin depocenters that elongated parallel to the trench.展开更多
The distribution of many active faults in western China is an important reasonfor the frequent earthquakes. With the rapid development of the western region, manymajor projects have been built there and the existence ...The distribution of many active faults in western China is an important reasonfor the frequent earthquakes. With the rapid development of the western region, manymajor projects have been built there and the existence of active faults is bound to have aninfluence on the safety of the engineering structure. Therefore, it is of great significanceto study the mechanism of fault slip instability for evaluating the geological stability ofthe region and for the site selection of major projects. In this paper, cusp catastrophetheory is used to establish a cusp catastrophe model with general softened form ofstrike-slip faults on the basis of strike-slip faults. In this model, the influence of thesoftening property of fault zone on fault instability is considered. Based on this model,the conditions of slip instability of strike-slip faults are derived and further the half-slipdistance, far-field displacement and energy release equation of sliding-slip fault arerevealed. The influences of the system stiffness ratio and the softening property of thefault zone on the half-wave displacement, the far-field displacement and the energyrelease are shown. Which lays a good foundation for further research on activefault-induced earthquake mechanism.展开更多
基金Projects(52378411,52208404)supported by the National Natural Science Foundation of China。
文摘The tunnel subjected to strike-slip fault dislocation exhibits severe and catastrophic damage.The existing analysis models frequently assume uniform fault displacement and fixed fault plane position.In contrast,post-earthquake observations indicate that the displacement near the fault zone is typically nonuniform,and the fault plane position is uncertain.In this study,we first established a series of improved governing equations to analyze the mechanical response of tunnels under strike-slip fault dislocation.The proposed methodology incorporated key factors such as nonuniform fault displacement and uncertain fault plane position into the governing equations,thereby significantly enhancing the applicability range and accuracy of the model.In contrast to previous analytical models,the maximum computational error has decreased from 57.1%to 1.1%.Subsequently,we conducted a rigorous validation of the proposed methodology by undertaking a comparative analysis with a 3D finite element numerical model,and the results from both approaches exhibited a high degree of qualitative and quantitative agreement with a maximum error of 9.9%.Finally,the proposed methodology was utilized to perform a parametric analysis to explore the effects of various parameters,such as fault displacement,fault zone width,fault zone strength,the ratio of maximum fault displacement of the hanging wall to the footwall,and fault plane position,on the response of tunnels subjected to strike-slip fault dislocation.The findings indicate a progressive increase in the peak internal forces of the tunnel with the rise in fault displacement and fault zone strength.Conversely,an augmentation in fault zone width is found to contribute to a decrease in the peak internal forces.For example,for a fault zone width of 10 m,the peak values of bending moment,shear force,and axial force are approximately 46.9%,102.4%,and 28.7% higher,respectively,compared to those observed for a fault zone width of 50 m.Furthermore,the position of the peak internal forces is influenced by variations in the ratio of maximum fault displacement of the hanging wall to footwall and the fault plane location,while the peak values of shear force and axial force always align with the fault plane.The maximum peak internal forces are observed when the footwall exclusively bears the entirety of the fault displacement,corresponding to a ratio of 0:1.The peak values of bending moment,shear force,and axial force for the ratio of 0:1 amount to approximately 123.8%,148.6%,and 111.1% of those for the ratio of 0.5:0.5,respectively.
基金Project supported by the National Natural Science Foundation of China(Nos.12172303 and12111530222)the Shaanxi Key Research and Development Program for International Cooperation and Exchanges of China(No.2022KWZ-23)+1 种基金the Fundamental Research Funds for the Central Universities of China(No.5000220118)the Science and Technology Council of Taiwan of China(No.NSTC 111-2811-E-A49-534)。
文摘An analytical solution for the responses of composite laminates under oblique low-velocity impacts is presented for a cross-ply,orthotropic,and rectangular plate under oblique low-velocity impacts.The plate is under simply-supported edge conditions,and the dynamic displacement field is expressed in a mixed form by in-plane double Fourier series and cubic polynomials through the thickness as 12 variables for each layer.A system of modified Lagrange equations is derived with all interface constraints.The Hertz and Cattaneo-Mindlin theories are used to solve for the normal and tangential contact forces during the impacts.By further discretizing in the time domain,the oblique impact problem is solved iteratively.While the numerical results clearly show the influence of impact velocity,stacking sequence,mechanical parameters,and geometric parameters,the proposed analytical approach could serve as a theoretical basis for the laminate analysis and design when it is under low-velocity impacts.
文摘The Altyn Tagh Fault（ATF） is the longest, lithospheric scale and strike-slip fault in East Asia. In the last three decades, multidisciplinary studies focusing on the timing, displacement of strikeslip and growth mechanics of the ATF have made great progresses. Most studies revealed that the ATF is a sinistral strike-slip and thrust fault, which underwent multiple episodes of activation. The fault is oriented NEE with a length of 1600 km, but the direction, timing of activity and magnitude of its extension eastward are still unclear. The AFT was predominately active during the Mesozoic and Cenozoic, in relation to the Mesozoic collision of the Cimmerian continent（Qiangtang and Lhasa block） and Cenozoic collision of India with Asia. The AFT strike-slipped with a left-lateral displacement of ca. 400 km during the Cenozoic and the displacement were bigger in the western segment and stronger in the early stage of fault activation. The slip-rates in the Quaternary were bigger in the middle segment than in the western and eastern segment. We roughly estimated the Mesozoic displacement as ca. 150-300 km. The latest paleomagnetic data showed that the clockwise vertical-axis rotation did not take place in the huge basins（the Tarim and Qaidam） at both side of ATF during the Cenozoic, but the rotation happened in the small basins along the ATF. This rotation may play an important role on accommodating the tectonic deformation and displacement of the ATF. Even if we have achieved consensus for many issues related to the ATF, some issues still need to be study deeply; such as：（a） the temporal and spatial coupling relationship between the collision of Cimmerian continent with Asia and the history of AFT in the Mesozoic and（b） the tectonic deformation history which records by the sediments of the basins within and at both side of AFT and was constrained by a high-resolution and accurate chronology such as magnetostratigraphy and paleomagnetic data.
基金Supported by the China National Science and Technology Major Project(2016ZX05024-002-006)
文摘Based on 3D seismic data, the evolution mechanism and characteristics of faults were investigated to reveal the structural origin and its control on differential hydrocarbon accumulation through comprehensive analyses, including structure style analysis, fault activity analysis, analogue modelling and comparison among the wells. The complex fault system with differently trending faults resulted from strike-slip and rifting in Paleogene was partly activated, developed successively and stretched obliquely by the near-NS extensional stress field in Neogene. In the area little affected by pre-existing faults, new faults nearly perpendicular to the extension direction developed. The structural development in the study area was not caused by transpressional strike slip. Under the oblique extension effect of pre-existing faults, if the angle between the strike of pre-existing fault and the extensional direction is different, the strike-slip and extensional stresses are different in ratio. The larger the angle between the two is, the stronger the extensional component, the poorer the sealing ability of the fault, and the stronger the oil and gas migration capacity will be. Conversely, the smaller the angle between the two is, the stronger the strike-slip component, the better the sealing ability of the fault, and the poorer the oil and gas migration capacity will be. The accumulation condition analysis results considering the fault trend are in good agreement with the oil and gas shows in wells drilled in this area.
文摘Based on structural deformation analysis in the oblique Sumatra subduction system, we review uplift mechanisms of the forearc high and formation of the forearc basin. The development of the forearc high has been attributed to the flexural uplift, basin inversion, uplift of older accretion wedge, and backthrust in the landward margin of the accretion wedge. Observation of recently acquired seismic reflection data shows that the interplay between trenchward-vergent thrusts and arcward-vergent backthrusts has played a major role in the uplift of forearc high. The uplifted sediments on the forearc high were previously formed in a forearc basin environment. The present-day morphology of the forearc high and forearc basin is related to the uplift of the accretionary wedge and the overlying forearc basin sediments during Pliocene. Regardless of obliquity in the subduction system, the Sumatran forearc region is dominated by compression that plays an important role in forming Neogene basin depocenters that elongated parallel to the trench.
文摘The distribution of many active faults in western China is an important reasonfor the frequent earthquakes. With the rapid development of the western region, manymajor projects have been built there and the existence of active faults is bound to have aninfluence on the safety of the engineering structure. Therefore, it is of great significanceto study the mechanism of fault slip instability for evaluating the geological stability ofthe region and for the site selection of major projects. In this paper, cusp catastrophetheory is used to establish a cusp catastrophe model with general softened form ofstrike-slip faults on the basis of strike-slip faults. In this model, the influence of thesoftening property of fault zone on fault instability is considered. Based on this model,the conditions of slip instability of strike-slip faults are derived and further the half-slipdistance, far-field displacement and energy release equation of sliding-slip fault arerevealed. The influences of the system stiffness ratio and the softening property of thefault zone on the half-wave displacement, the far-field displacement and the energyrelease are shown. Which lays a good foundation for further research on activefault-induced earthquake mechanism.
