By adding frequency modulated signals to the intensity equation of gain noise model of the single-mode laser driven by two coloured noises which are correlated, this paper uses the linear approximation method to calcu...By adding frequency modulated signals to the intensity equation of gain noise model of the single-mode laser driven by two coloured noises which are correlated, this paper uses the linear approximation method to calculate the power spectrum and signal-to-noise ratio （SNR） of the laser intensity. The results show that the SNR appears typical stochastic resonance with the variation of intensity of the pump noise and quantum noise. As the amplitude of a modulated signal has effects on the SNR, it shows suppression, monotone increasing, stochastic resonance, and multiple stochastic resonance with the variation of the frequency of a carrier signal and modulated signal.展开更多
A new method of estimating the frequency-known signals from the strong background noise was presented first. Then the new method was used in the demodulation of the digital frequency modulation (FSK) signals. The new ...A new method of estimating the frequency-known signals from the strong background noise was presented first. Then the new method was used in the demodulation of the digital frequency modulation (FSK) signals. The new demodulation method can complete the demodulation of the FSK signals only with the carrier frequency and without any carrier phase information. The simulation results show that the performance of anti-noise of the new method is better than that of the incoherent demodulation method and the fluctuation of the carrier phase has little effect on the new method. So the new demodulation method has a fine prospect in the practical applications.展开更多
Conventional parameter estimation methods for pseudo-random binary code-linear frequency modulation(PRBC-LFM)signals require prior knowledge,are computationally complex,and exhibit poor performance at low signal-to-no...Conventional parameter estimation methods for pseudo-random binary code-linear frequency modulation(PRBC-LFM)signals require prior knowledge,are computationally complex,and exhibit poor performance at low signal-to-noise ratios(SNRs).To overcome these problems,a blind parameter estimation method based on a Duffing oscillator array is proposed.A new relationship formula among the state of the Duffing oscillator,the pseudo-random sequence of the PRBC-LFM signal,and the frequency difference between the PRBC-LFM signal and the periodic driving force signal of the Duffing oscillator is derived,providing the theoretical basis for blind parameter estimation.Methods based on amplitude method,short-time Fourier transform method,and power spectrum entropy method are used to binarize the output of the Duffing oscillator array,and their performance is compared.The pseudo-random sequence is estimated using Duffing oscillator array synchronization,and the carrier frequency parameters are obtained by the relational expressions and characteristics of the difference frequency.Simulation results show that this blind estimation method overcomes limitations in prior knowledge and maintains good parameter estimation performance up to an SNR of-35 dB.展开更多
In view of the complexity of existing linear frequency modulation(LFM)signal parameter estimation methods and the poor antinoise performance and estimation accuracy under a low signal-to-noise ratio(SNR),a parameter e...In view of the complexity of existing linear frequency modulation(LFM)signal parameter estimation methods and the poor antinoise performance and estimation accuracy under a low signal-to-noise ratio(SNR),a parameter estimation method for LFM signals with a Duffing oscillator based on frequency periodicity is proposed in this paper.This method utilizes the characteristic that the output signal of the Duffing oscillator excited by the LFM signal changes periodically with frequency,and the modulation period of the LFM signal is estimated by autocorrelation processing of the output signal of the Duffing oscillator.On this basis,the corresponding relationship between the reference frequency of the frequencyaligned Duffing oscillator and the frequency range of the LFM signal is analyzed by the periodic power spectrum method,and the frequency information of the LFM signal is determined.Simulation results show that this method can achieve high-accuracy parameter estimation for LFM signals at an SNR of-25 dB.展开更多
The transports of the dynamic biochemical signals in the non-reversing pulsatile flows in the mixing microchannel of a Y-shaped microfluidic device are ana- lyzed. The results show that the mixing micro-channel acts a...The transports of the dynamic biochemical signals in the non-reversing pulsatile flows in the mixing microchannel of a Y-shaped microfluidic device are ana- lyzed. The results show that the mixing micro-channel acts as a low-pass filter, and the biochemical signals are nonlinearly modulated by the pulsatile flows, which depend on the biochemical signal frequency, the flow signal frequency, and the biochemical signal transporting distance. It is concluded that, the transfer characteristics of the dynamic biochemical signals, which are transported in the time-varying flows, should be carefully considered for better loading biochemical signals on the cells cultured on the bottom of the microfluidic channel.展开更多
Sine Non-linear Chirp Keying(SNCK) is a kind of high-efficient modulation scheme, which provides a potential new beamforming method in communication and radar systems. It has been proved to have advantages in some par...Sine Non-linear Chirp Keying(SNCK) is a kind of high-efficient modulation scheme, which provides a potential new beamforming method in communication and radar systems. It has been proved to have advantages in some parameter estimation issues over conventional modulation schemes. In this paper, a novel transform termed as Discrete Sinusoidal Frequency Modulation transform(DSFMT) is proposed. Then, the DSFMT of SNCK signal is deduced and classified into three types, based on which, the time-bandwidth product is estimated by the proposed algorithm. Simulation results show that the noise has a signifi cant impact on the localization of the peak value and the time-bandwidth product can be estimated by using local ratio values when.展开更多
To generate high-frequency radio frequency(RF) vector signals, a vector signal generation method by optical frequency sextupling using a dual-parallel modulator is proposed. The method modulates vector signal on +3 rd...To generate high-frequency radio frequency(RF) vector signals, a vector signal generation method by optical frequency sextupling using a dual-parallel modulator is proposed. The method modulates vector signal on +3 rd order optical sideband and local oscillator(LO) signal on-3 rd order sideband using the intermodulation process in the DPMZM. After suppressing of the optical carrier and other sidebands through proper adjustment for modulator biases and modulation index, a frequency sextupled millimeter-wave vector signal can be generated after photodetection. The frequency sextupling will lower the bandwidth of the modulator, the local oscillator and the driving circuits. In addition, the phase of generated signal is not distorted after detection, and the power fading after fiber transmission can be avoided. In the simulation, a 500-MSym/s QPSK signal at 60 GHz is generated by 10-GHz drive signal. After travelling over fiber with length of 20/30/40-km, receiver power penalty keeps below 2.5 dB.展开更多
In this paper, the design of signal constellations parameters is studied for Differential Unitary Space-Time Modulation (DUSTM) based on the design criterion of maximizing the diversity product. Further, noninteger se...In this paper, the design of signal constellations parameters is studied for Differential Unitary Space-Time Modulation (DUSTM) based on the design criterion of maximizing the diversity product. Further, noninteger searching method for the signal constellation parameters design is proposed in order to get better codes. Experimental results show that under the different Doppler spread and data transmission rate, the proposed design performs better than the previous design using integer parameters in Multiple Input Multiple Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) system over frequency-selective fading channels.展开更多
<div style="text-align:justify;"> A generalized optical filterless approach to achieve photonic generation of frequency 16-tupling millimeter-wave (mm-wave) signal based on two cascaded dual-parallel M...<div style="text-align:justify;"> A generalized optical filterless approach to achieve photonic generation of frequency 16-tupling millimeter-wave (mm-wave) signal based on two cascaded dual-parallel Mach-Zehnder modulators (DPMZMs) is presented. A theoretical analysis leading to the operating conditions to achieve frequency 16-tupling is developed. Different modulation indices (MIs) can be implemented to achieve the frequency multiplication by adjusting the delay of tunable optical delay line (TODL). It is confirmed by simulation that the proposed scheme is effective, and the radio frequency spurious suppression ratio (RFSSR) of the generated frequency 16-tupling signal can be as high as 40 dB when the sub-MZMs have extinction ratios of 30 dB. Influencing factors such as extinction ratio, DC bias drift, phase shift deviation and RF voltage deviation on the performance of optical sideband suppression ratio (OSSR) and RFSSR are also investigated. </div>展开更多
The essay mainly studies a system of low frequency signal′s measurement and the extraction of its characteristic quantity,introduces how matlab analyzes and extracts low frequency signal.MATLAB,a visual programming s...The essay mainly studies a system of low frequency signal′s measurement and the extraction of its characteristic quantity,introduces how matlab analyzes and extracts low frequency signal.MATLAB,a visual programming software,designs testing program for mechanic vibration signal,analyzes and identifies vibration signal.The collected data shows the effectiveness of the system.Based on XM121 modules,the testing system collects and analyzes single channel signal.展开更多
Carrier frequency and symbol rate estimation are the main contents of parameter estimation,which is the basis of modulation recognition and further processing of signals especially in non-cooperative communication.Wit...Carrier frequency and symbol rate estimation are the main contents of parameter estimation,which is the basis of modulation recognition and further processing of signals especially in non-cooperative communication.With the development of wireless communication,the signal transmission environment has become increasingly bad,causing more difficulties in parameter estimation.It is well known that the signal cycle spectrum is robust to noises and signal parameters are closely related.In practice,it is impossible to calculate the cyclic spectrum of infinite length data signals.When using finite length data to obtain a cycle spectrum,the truncation noise is induced,resulting in interference.It is necessary to overcome the influence of noises in order to improve the detection ability of discrete spectral lines.An improved method of the discrete spectral line extraction algorithm is proposed by reflecting the amplitude advantage of discrete spectral lines through salient features of continuous noises in discrete spectral line neighborhood.展开更多
This paper presents a method on non-linear correction of broadband LFMCW signal utilizing its relative nonlinear error. The deriving procedure and the results simulated by a computer and tested by a practical system a...This paper presents a method on non-linear correction of broadband LFMCW signal utilizing its relative nonlinear error. The deriving procedure and the results simulated by a computer and tested by a practical system are also introduced. The method has two obvious advantages compared with the previous methods: (1) Correction has no relation with delay time td and sweep bandwidth B; (2) The inherent non-linear error of VCO has no influence on the correction and its last results.展开更多
Based on the advantage of phase coded signal and stepped frequency signal,a new hybrid modulation signal is introduced in this paper. It combines phase code modulation during the pulse with stepped frequency modulatio...Based on the advantage of phase coded signal and stepped frequency signal,a new hybrid modulation signal is introduced in this paper. It combines phase code modulation during the pulse with stepped frequency modulation between the pulses, which is named as phase-coded stepped-frequency ( PCSF ) signal. By analyzing its waveform and ambiguity function,the comparison between Stepped-Frequency ( SF) signal and PCSF signal is given,which shows that the PCSF signal is better than SF signal. Finally,the signal processing method with two stage compressed processing is presented. The simulation results show that this new hybrid modulation radar signal can get a higher stepped frequency than ordinary SF signal,realize the same equivalent bandwidth with less pulse number,and solve the conflict among the stepped frequency,the number of pulse, and transmit average power. Under the premises of a certain range resolution,this new hybrid modulation radar signal not only raises the data rate of radar system,but also reduces Doppler sensitivity with a good prospect, and the effect of one-dimensional range profile is much better than that of traditional SF signal. Therefore,this new hybrid modulation radar signal can be widely used in application.展开更多
A method to evaluate the influence of the laser linewidth on the linearly frequency-modulated(LFM)signals generated by heterodyning two free-running laser diodes(LDs)is proposed.The Pearson correlation coefficient bet...A method to evaluate the influence of the laser linewidth on the linearly frequency-modulated(LFM)signals generated by heterodyning two free-running laser diodes(LDs)is proposed.The Pearson correlation coefficient between the instantaneous frequency of the generated LFM signal and that of an ideal LFM signal is introduced to quantify the quality of the generated LFM signal.The closed-form solution of the correlation coefficient is given,which shows that the correlation coefficient is determined by the ratio of the LFM signal bandwidth to the square root of the total linewidth of the two LDs when the observation interval is fixed.Simulation results are also given,which proves the correctness of the theoretical results.展开更多
基金supported by the Key Project Scientific Research Foundation from the Education Department of Hubei Province of China(Grant No D200725001)
文摘By adding frequency modulated signals to the intensity equation of gain noise model of the single-mode laser driven by two coloured noises which are correlated, this paper uses the linear approximation method to calculate the power spectrum and signal-to-noise ratio （SNR） of the laser intensity. The results show that the SNR appears typical stochastic resonance with the variation of intensity of the pump noise and quantum noise. As the amplitude of a modulated signal has effects on the SNR, it shows suppression, monotone increasing, stochastic resonance, and multiple stochastic resonance with the variation of the frequency of a carrier signal and modulated signal.
基金the National Natural Science Foundation of China (60272077) the Science Foundation of Aeronautics (02F53030).
文摘A new method of estimating the frequency-known signals from the strong background noise was presented first. Then the new method was used in the demodulation of the digital frequency modulation (FSK) signals. The new demodulation method can complete the demodulation of the FSK signals only with the carrier frequency and without any carrier phase information. The simulation results show that the performance of anti-noise of the new method is better than that of the incoherent demodulation method and the fluctuation of the carrier phase has little effect on the new method. So the new demodulation method has a fine prospect in the practical applications.
基金the National Natural Science Foundation of China(Grant Nos.61973037 and 61673066).
文摘Conventional parameter estimation methods for pseudo-random binary code-linear frequency modulation(PRBC-LFM)signals require prior knowledge,are computationally complex,and exhibit poor performance at low signal-to-noise ratios(SNRs).To overcome these problems,a blind parameter estimation method based on a Duffing oscillator array is proposed.A new relationship formula among the state of the Duffing oscillator,the pseudo-random sequence of the PRBC-LFM signal,and the frequency difference between the PRBC-LFM signal and the periodic driving force signal of the Duffing oscillator is derived,providing the theoretical basis for blind parameter estimation.Methods based on amplitude method,short-time Fourier transform method,and power spectrum entropy method are used to binarize the output of the Duffing oscillator array,and their performance is compared.The pseudo-random sequence is estimated using Duffing oscillator array synchronization,and the carrier frequency parameters are obtained by the relational expressions and characteristics of the difference frequency.Simulation results show that this blind estimation method overcomes limitations in prior knowledge and maintains good parameter estimation performance up to an SNR of-35 dB.
基金Project supported by the National Natural Science Foundation of China(Grant No.61973037)。
文摘In view of the complexity of existing linear frequency modulation(LFM)signal parameter estimation methods and the poor antinoise performance and estimation accuracy under a low signal-to-noise ratio(SNR),a parameter estimation method for LFM signals with a Duffing oscillator based on frequency periodicity is proposed in this paper.This method utilizes the characteristic that the output signal of the Duffing oscillator excited by the LFM signal changes periodically with frequency,and the modulation period of the LFM signal is estimated by autocorrelation processing of the output signal of the Duffing oscillator.On this basis,the corresponding relationship between the reference frequency of the frequencyaligned Duffing oscillator and the frequency range of the LFM signal is analyzed by the periodic power spectrum method,and the frequency information of the LFM signal is determined.Simulation results show that this method can achieve high-accuracy parameter estimation for LFM signals at an SNR of-25 dB.
基金Project supported by the National Natural Science Foundation of China(Nos.11172060 and11672065)
文摘The transports of the dynamic biochemical signals in the non-reversing pulsatile flows in the mixing microchannel of a Y-shaped microfluidic device are ana- lyzed. The results show that the mixing micro-channel acts as a low-pass filter, and the biochemical signals are nonlinearly modulated by the pulsatile flows, which depend on the biochemical signal frequency, the flow signal frequency, and the biochemical signal transporting distance. It is concluded that, the transfer characteristics of the dynamic biochemical signals, which are transported in the time-varying flows, should be carefully considered for better loading biochemical signals on the cells cultured on the bottom of the microfluidic channel.
基金supported by Science and Technology on Information Transmission and Dissemination in Communication Networks Laboratory(KX152600015/ITD-U15006)National Natural Science Foundation of China(No.61401196)
文摘Sine Non-linear Chirp Keying(SNCK) is a kind of high-efficient modulation scheme, which provides a potential new beamforming method in communication and radar systems. It has been proved to have advantages in some parameter estimation issues over conventional modulation schemes. In this paper, a novel transform termed as Discrete Sinusoidal Frequency Modulation transform(DSFMT) is proposed. Then, the DSFMT of SNCK signal is deduced and classified into three types, based on which, the time-bandwidth product is estimated by the proposed algorithm. Simulation results show that the noise has a signifi cant impact on the localization of the peak value and the time-bandwidth product can be estimated by using local ratio values when.
基金Sponsored by the Programme of Introducing Talents of Discipline to Universities(Grant No.B08038)
文摘To generate high-frequency radio frequency(RF) vector signals, a vector signal generation method by optical frequency sextupling using a dual-parallel modulator is proposed. The method modulates vector signal on +3 rd order optical sideband and local oscillator(LO) signal on-3 rd order sideband using the intermodulation process in the DPMZM. After suppressing of the optical carrier and other sidebands through proper adjustment for modulator biases and modulation index, a frequency sextupled millimeter-wave vector signal can be generated after photodetection. The frequency sextupling will lower the bandwidth of the modulator, the local oscillator and the driving circuits. In addition, the phase of generated signal is not distorted after detection, and the power fading after fiber transmission can be avoided. In the simulation, a 500-MSym/s QPSK signal at 60 GHz is generated by 10-GHz drive signal. After travelling over fiber with length of 20/30/40-km, receiver power penalty keeps below 2.5 dB.
基金Supported by the National Natural Science Foundation of China (No.60772062)the National Basic Research Pro-gram of China (No.2007CB310607)the Natural Science Research Fund of Jiangsu University (No. 05 KJB 510090)
文摘In this paper, the design of signal constellations parameters is studied for Differential Unitary Space-Time Modulation (DUSTM) based on the design criterion of maximizing the diversity product. Further, noninteger searching method for the signal constellation parameters design is proposed in order to get better codes. Experimental results show that under the different Doppler spread and data transmission rate, the proposed design performs better than the previous design using integer parameters in Multiple Input Multiple Output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) system over frequency-selective fading channels.
文摘<div style="text-align:justify;"> A generalized optical filterless approach to achieve photonic generation of frequency 16-tupling millimeter-wave (mm-wave) signal based on two cascaded dual-parallel Mach-Zehnder modulators (DPMZMs) is presented. A theoretical analysis leading to the operating conditions to achieve frequency 16-tupling is developed. Different modulation indices (MIs) can be implemented to achieve the frequency multiplication by adjusting the delay of tunable optical delay line (TODL). It is confirmed by simulation that the proposed scheme is effective, and the radio frequency spurious suppression ratio (RFSSR) of the generated frequency 16-tupling signal can be as high as 40 dB when the sub-MZMs have extinction ratios of 30 dB. Influencing factors such as extinction ratio, DC bias drift, phase shift deviation and RF voltage deviation on the performance of optical sideband suppression ratio (OSSR) and RFSSR are also investigated. </div>
文摘The essay mainly studies a system of low frequency signal′s measurement and the extraction of its characteristic quantity,introduces how matlab analyzes and extracts low frequency signal.MATLAB,a visual programming software,designs testing program for mechanic vibration signal,analyzes and identifies vibration signal.The collected data shows the effectiveness of the system.Based on XM121 modules,the testing system collects and analyzes single channel signal.
基金supported by the National Key R&D Program of China(2016YFB0800203)
文摘Carrier frequency and symbol rate estimation are the main contents of parameter estimation,which is the basis of modulation recognition and further processing of signals especially in non-cooperative communication.With the development of wireless communication,the signal transmission environment has become increasingly bad,causing more difficulties in parameter estimation.It is well known that the signal cycle spectrum is robust to noises and signal parameters are closely related.In practice,it is impossible to calculate the cyclic spectrum of infinite length data signals.When using finite length data to obtain a cycle spectrum,the truncation noise is induced,resulting in interference.It is necessary to overcome the influence of noises in order to improve the detection ability of discrete spectral lines.An improved method of the discrete spectral line extraction algorithm is proposed by reflecting the amplitude advantage of discrete spectral lines through salient features of continuous noises in discrete spectral line neighborhood.
文摘This paper presents a method on non-linear correction of broadband LFMCW signal utilizing its relative nonlinear error. The deriving procedure and the results simulated by a computer and tested by a practical system are also introduced. The method has two obvious advantages compared with the previous methods: (1) Correction has no relation with delay time td and sweep bandwidth B; (2) The inherent non-linear error of VCO has no influence on the correction and its last results.
基金Sponsored by the Nation Nature Science Foundation of China(Grant No. 61201237)the Nature Science Foundation of Heilongjiang Province of China(Grant No. QC2012C069)the Fundationtal Research Funds for the Central Universities (Grant No. HEUCFZ1129, HEUCF130810,HEUCF130817)
文摘Based on the advantage of phase coded signal and stepped frequency signal,a new hybrid modulation signal is introduced in this paper. It combines phase code modulation during the pulse with stepped frequency modulation between the pulses, which is named as phase-coded stepped-frequency ( PCSF ) signal. By analyzing its waveform and ambiguity function,the comparison between Stepped-Frequency ( SF) signal and PCSF signal is given,which shows that the PCSF signal is better than SF signal. Finally,the signal processing method with two stage compressed processing is presented. The simulation results show that this new hybrid modulation radar signal can get a higher stepped frequency than ordinary SF signal,realize the same equivalent bandwidth with less pulse number,and solve the conflict among the stepped frequency,the number of pulse, and transmit average power. Under the premises of a certain range resolution,this new hybrid modulation radar signal not only raises the data rate of radar system,but also reduces Doppler sensitivity with a good prospect, and the effect of one-dimensional range profile is much better than that of traditional SF signal. Therefore,this new hybrid modulation radar signal can be widely used in application.
基金supported by the National Key R&D Program of China(No.2017YFE0121500)the National Natural Science Foundation of China(Nos.61971193 and 61601297)+1 种基金the Open Fund of State Key Laboratory of Advanced Optical Communication Systems and Networks,Peking University,China(No.2020GZKF005)the Fundamental Research Funds for the Central Universities。
文摘A method to evaluate the influence of the laser linewidth on the linearly frequency-modulated(LFM)signals generated by heterodyning two free-running laser diodes(LDs)is proposed.The Pearson correlation coefficient between the instantaneous frequency of the generated LFM signal and that of an ideal LFM signal is introduced to quantify the quality of the generated LFM signal.The closed-form solution of the correlation coefficient is given,which shows that the correlation coefficient is determined by the ratio of the LFM signal bandwidth to the square root of the total linewidth of the two LDs when the observation interval is fixed.Simulation results are also given,which proves the correctness of the theoretical results.
