A simple and rapid method for the determination of polyethylene oxide-type non-ionic surfactants is reported herein. This method is based on the adhesion of calcium/non-ionic surfactant complexes with tetra phenyl por...A simple and rapid method for the determination of polyethylene oxide-type non-ionic surfactants is reported herein. This method is based on the adhesion of calcium/non-ionic surfactant complexes with tetra phenyl porphine sulfonic acid （TPPS） to the wall of reaction vessel upon vigorous shaking. The ion-associate adhering to the inner wall of the vessel was dissolved with water after discarding the solution and spectrophotometrically assayed at 412 nm. From the standard curve for Triton X-100, the order of the sensitivity for different ions was as follows： Ca^2＋〉 K^＋〉 NH4^＋〉 Ba^2＋. The proposed method does not involve extraction of the ion-associated with harmful solvents and can be simply performed by combining a procedure based on hand shaking and the use of a spectrophotometer.展开更多
A spectrophotometric approach for the detection of non-ionic surfactant (Triton X-100) has been proposed in this paper. This method does not involve extraction of the ion-associate with harmful solvents, but employs a...A spectrophotometric approach for the detection of non-ionic surfactant (Triton X-100) has been proposed in this paper. This method does not involve extraction of the ion-associate with harmful solvents, but employs adhesion of the ion-association of potassium/non-ionic surfactants complex and tetraphenylporphyrin tetrasulfonic acid obtained by vigorous shaking. The adhered ion-associate was dissolved with water and its absorbance was measured. The sensitivity for Triton X-100 was determined to be 0.146 (expressed as absorbance of 1 mg/L solution). The adhesion tendency of ion-associate was found to be dependent on the water contact angle, which in turn was influenced by a high adhesion of the ion-associate and by low blank values. In this respect, a tetrafluo-roethylene vessel was found to be the most suitable for the detection of non-ionic surfactants. This spectrophotometrical method is simply and rapidly performed by a procedure based on mechanical shaking and can be employed to detect non-ionic surfactants containing more than 7 polyethylene oxide units.展开更多
A method based on cloud point extraction was developed to determine phthalate esters including di-ethyl-phthalate （DEP）, di- （2-ethylhexyl）-phthalate （DEHP） and di-cyclohexyl-phthalate （DCP） in environmental w...A method based on cloud point extraction was developed to determine phthalate esters including di-ethyl-phthalate （DEP）, di- （2-ethylhexyl）-phthalate （DEHP） and di-cyclohexyl-phthalate （DCP） in environmental water samples using high-performance liquid chromatography separation and ultraviolet detection （HPLC-UV）. The non-ionic surfactant Triton X-114 was chosen as extraction solvent. The parameters affecting extraction efficiency, such as concentrations of Triton X-114 and Na2SO4, equilibration temperature, equilibration time and centrifugation time were evaluated and optimized. Under the optimum conditions, the method can achieve preconcentration factors of 35, 88, 111 and detection of limits of 2.0, 3.8, 1.0 ng/ml for DEP, DEHP and DCP in 10-ml water sample, respectively. The proposed method was successfully applied to the determination of trace amount of phathalate esters in effluent water of the wastewater treatment plant and the lixivium of plastic fragments.展开更多
The effect of a non-ionic surfactant on particles removal in post-CMP cleaning was investigated. By changing the concentration of the non-ionic surfactant, a series of experiments were performed on the 12 inch Cu patt...The effect of a non-ionic surfactant on particles removal in post-CMP cleaning was investigated. By changing the concentration of the non-ionic surfactant, a series of experiments were performed on the 12 inch Cu pattern wafers in order to determine the best cleaning results. Then the effect of the surfactant on the reduction of defects and the removal of particles was discussed in this paper. What is more, the negative effect of a non-ionic surfactant was also discussed. Based on the experiment results, it is concluded that the non-ionic surfactant could cause good and ill effects at different concentrations in the post-CMP cleaning process. This understanding will serve as a guide to how much surfactant should be added in order to achieve excellent cleaning performance.展开更多
This paper presents a new cleaning process for particle and organic contaminants on polished silicon wafer surfaces.It combines a non-ionic surfactant with boron-doped diamond（BDD） film anode electrochemical oxidati...This paper presents a new cleaning process for particle and organic contaminants on polished silicon wafer surfaces.It combines a non-ionic surfactant with boron-doped diamond（BDD） film anode electrochemical oxidation. The non-ionic surfactant is used to remove particles on the polished wafer＇s surface,because it can form a protective film on the surface,which makes particles easy to remove.The effects of particle removal comparative experiments were observed by metallographic microscopy,which showed that the 1%v/v non-ionic surfactant achieved the best result. However,the surfactant film itself belongs to organic contamination,and it eventually needs to be removed.BDD film anode electrochemical oxidation（BDD-EO） is used to remove organic contaminants,because it can efficiently degrade organic matter.Three organic contaminant removal comparative experiments were carried out：the first one used the non-ionic surfactant in the first step and then used BDD-EO,the second one used BDD-EO only,and the last one used RCA cleaning technique.The XPS measurement result shows that the wafer＇s surface cleaned by BDD-EO has much less organic residue than that cleaned by RCA cleaning technique,and the non-ionic surfactant can be efficiently removed by BDD-EO.展开更多
The interaction of poly(ethylene oxide)(PEO)with the ionic surfactants,sodium dodecylsulfate(SDS)and cetyltrimethylammonium chloride(CTAC)respectively,in aqueous solutions containing a certain concentration of NH_4Cl,...The interaction of poly(ethylene oxide)(PEO)with the ionic surfactants,sodium dodecylsulfate(SDS)and cetyltrimethylammonium chloride(CTAC)respectively,in aqueous solutions containing a certain concentration of NH_4Cl, is studied by the viscosity measurement.It has been found that the ion-dipole interaction between PEO and ionic surfactants is changed considerably by the organic salt.For anionic suffactant of SDS,the addition of NH_4Cl into solution strengthens the interaction between PEO and the headgroup o...展开更多
High purity Y_2O_3 nano-powders was synthesized directly from solution ofindustrial YCl_3 by method of oxalate precipitation through super-micro-reactors made by complexnon-ionic surfactant. The purity and diameter of...High purity Y_2O_3 nano-powders was synthesized directly from solution ofindustrial YCl_3 by method of oxalate precipitation through super-micro-reactors made by complexnon-ionic surfactant. The purity and diameter of Y_2O_3 particles were controlled by such processingparameters as concentration of YCl_3 and oxalic acid and complex non-ionic surfactant etc. TEMphotomicrographs show that Y_2O_3 particles are spherical in shape, with an average diameter of lessthan 30 nm. Test results certify that the purity and particle diameter as well as the dispersion ofY_2O_3 nano-powder depend on the concentrations of YCl_3, oxalic acid and complex non-ionicsurfactant. The optimum ranges of the concentrations for YCl_3 and complex non-ionic surfactant whenthe diameter of Y_2O_3 particles is smaller than 100 nm are 0.43 ～1.4 mol ? L^(-1) and0.031～0.112 mol·L^(-1) respectively, while the mass fraction range of oxalic acid is 10% ～18% .The purity of Y_2O_3 nano-powder tested by ICP-AES analysis is 99.99% .展开更多
Surfactants, such as non-ionic Surfynol 485 （ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol）, have been applied to accelerate removal of polycyclic aromatic hydrocarbons from soil. This study investigated the dis...Surfactants, such as non-ionic Surfynol 485 （ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol）, have been applied to accelerate removal of polycyclic aromatic hydrocarbons from soil. This study investigated the dissipation of anthracene, and carbon （C） and nitrogen （N） mineralization in soil amended with non-ionic Surfynol 485 at different rates. Soil samples of a Typic Fragiudept taken from Otumba, Mexico were spiked with anthracene at a final concentration of 520 mg kg^-1 dry soil using acetone as solvent, amended with 0.0, 24.9, 49.8 or 124.4 g kg^-1 soil of the surfactant and incubated in the laboratory. The soil not amended with anthracene, acetone and the surfactant was used as a control. Dynamics of C and N and the concentration of anthracene were monitored for 56 d. After 56 d of incubation, 38% of the anthracene was removed from the unamended soil, and 47%, 55% and 66% of the anthracene were removed when 24.9, 49.8 and 124.4 g kg^-1 of the surfactant were applied, respectively. Application of acetone, anthracene or surfactant increased the emission of CO2, but decreased the mineral N compared to the unamended control. Applying the surfactant to the acetone or anthracene-amended soil reduced emission of CO2, but increased the mineral N at the lower application rates of the surfactant. It was found that the application of the non-ionic surfactant increased the bioavailability of anthracene and thus its removal from soil, increased C mineralization, but decreased N miaeralization. Consequently, the application of non-ionic surfactant could be easily used to accelerate the removal of pollutants from hydrocarbon-contaminated soils, but mineral N in the soil would decrease, which might inhibit plant growth.展开更多
In the last few decades numbers of review and research articles have been published on niosomes. This shows the relevant interest of academias & researchers in niosomes because of the advantages sponsored by them ...In the last few decades numbers of review and research articles have been published on niosomes. This shows the relevant interest of academias & researchers in niosomes because of the advantages sponsored by them over other colloidal drug delivery systems. Niosomes formation occurs when non-ionic surfactant vesicles assemble themselves. Various antineoplastic agents are used in chemotherapy, but they have some drawbacks that these agents cause cell death in normal tissues as well. There are two approaches to overcome this limitation. First, to modify the structure of existing drugs, but this will not possible because it changes the properties of drugs. Second, the development of nano-carriers like liposomes, dendrimers, nanoparticles, niosomes et al. Among all, niosomes (non-ionic surfactant vesicles) have more advantages besides all nano-carriers. Drugs either hydrophilic in nature or hydrophobic in nature, both can be incorporated in niosomes. And by embedding specific ligands over vesicular surface enables us to target the drug to specific cancer cells.展开更多
A novel cleaning solution, named FA/O alkaline cleaner, was proposed and demonstrated in the removal of colloidal silica abrasives. In order to remove both the chemical and physical absorbed colloidal silica abrasives...A novel cleaning solution, named FA/O alkaline cleaner, was proposed and demonstrated in the removal of colloidal silica abrasives. In order to remove both the chemical and physical absorbed colloidal silica abrasives, an FA/OII chelating agent and non-ionic surfactant were added into the cleaner. By varying the concentration of chelating agent and non-ionic surfactant, a series of experiments were performed to determine the best cleaning results. This paper discusses the mechanism of the removal of colloidal silica abrasives with a FA/O alkaline cleaner. Based on the experiment results, it is concluded that both the FA/OII chelating and non-ionic surfactant could benefit the removal of colloidal silica abrasives. When the concentration of FAJOII chelating agent and FA/O non-ionic surfactant reached the optima value, it was demonstrated that silica abrasives could be removed efficiently by this novel cleaning solution.展开更多
This paper investigated the effect of FA/O and hydrogen peroxide （H2O2） on ruthenium （Ru） removal rate （RR） and static etching rate （SER）. It was revealed that Ru RR and SER first linearly increased then slowl...This paper investigated the effect of FA/O and hydrogen peroxide （H2O2） on ruthenium （Ru） removal rate （RR） and static etching rate （SER）. It was revealed that Ru RR and SER first linearly increased then slowly decreaseed with the increasing H2O2 probably due to the formation of uniform Ru oxides on the surface during polishing. Their corrosion behaviors and states of surface oxidation were analyzed. In addition, FA/O could chelate Ru oxides （such as （RuO4）2- and RUO4- changed into soluble amine salts [R（NH3）4] （RuO4）2） and enhance Ru RR. The non-ionic surfactant AD was used to improve the Ru CMP performance. In particular, the addition of AD can lead to significant improvement of the surface roughness.展开更多
This work investigates systematically the effect of FA/O II chelating agent and FA/O I surfactant in alkaline cleaning solutions on benzotriazole （BTA） removal during post-Cu CMP cleaning in GLSI under the con- diti...This work investigates systematically the effect of FA/O II chelating agent and FA/O I surfactant in alkaline cleaning solutions on benzotriazole （BTA） removal during post-Cu CMP cleaning in GLSI under the con- dition of static etching. The best detergent formulation for BTA removal can be determined by optimization of the experiments of single factor and compound cleaning solution, which has been further confirmed experimentally by contact angle （CA） measurements. The resulting solution with the best formulation has been measured for the actual production line, and the results demonstrate that the obtained cleaning solution can effectively and efficiently remove BTA, CuO and abrasive SiO2 without basically causing interfacial corrosion. This work demonstrates the possibility of developing a simple, low-cost and environmentally-friendly cleaning solution to effectively solve the issues of BTA removal on post-Cu CMP cleaning in a multi-layered copper wafer.展开更多
In this communication,we report four component condensations of acetophenone,arylaldehydes,arylthiol,and malononitrile in the presence of Triton X-100（5 mol%） aqueous micelles.This reaction led to the formation of 4...In this communication,we report four component condensations of acetophenone,arylaldehydes,arylthiol,and malononitrile in the presence of Triton X-100（5 mol%） aqueous micelles.This reaction led to the formation of 4,6-diaryl-2-（arylthio）nicotinonitrile new derivatives in good yields.The FT-IR,^19F NMR,^1H NMR,^13C NMR spectra and elemental analysis confirm the structure of compounds.展开更多
文摘A simple and rapid method for the determination of polyethylene oxide-type non-ionic surfactants is reported herein. This method is based on the adhesion of calcium/non-ionic surfactant complexes with tetra phenyl porphine sulfonic acid （TPPS） to the wall of reaction vessel upon vigorous shaking. The ion-associate adhering to the inner wall of the vessel was dissolved with water after discarding the solution and spectrophotometrically assayed at 412 nm. From the standard curve for Triton X-100, the order of the sensitivity for different ions was as follows： Ca^2＋〉 K^＋〉 NH4^＋〉 Ba^2＋. The proposed method does not involve extraction of the ion-associated with harmful solvents and can be simply performed by combining a procedure based on hand shaking and the use of a spectrophotometer.
文摘A spectrophotometric approach for the detection of non-ionic surfactant (Triton X-100) has been proposed in this paper. This method does not involve extraction of the ion-associate with harmful solvents, but employs adhesion of the ion-association of potassium/non-ionic surfactants complex and tetraphenylporphyrin tetrasulfonic acid obtained by vigorous shaking. The adhered ion-associate was dissolved with water and its absorbance was measured. The sensitivity for Triton X-100 was determined to be 0.146 (expressed as absorbance of 1 mg/L solution). The adhesion tendency of ion-associate was found to be dependent on the water contact angle, which in turn was influenced by a high adhesion of the ion-associate and by low blank values. In this respect, a tetrafluo-roethylene vessel was found to be the most suitable for the detection of non-ionic surfactants. This spectrophotometrical method is simply and rapidly performed by a procedure based on mechanical shaking and can be employed to detect non-ionic surfactants containing more than 7 polyethylene oxide units.
基金Projected supported by the National Basic Research Program (973)of China (No. 2003CB415001)the Pilot Program of KnowledgeInnovation Program of Chinese Academy of Sciences (No. KZCX3-SW-431).
文摘A method based on cloud point extraction was developed to determine phthalate esters including di-ethyl-phthalate （DEP）, di- （2-ethylhexyl）-phthalate （DEHP） and di-cyclohexyl-phthalate （DCP） in environmental water samples using high-performance liquid chromatography separation and ultraviolet detection （HPLC-UV）. The non-ionic surfactant Triton X-114 was chosen as extraction solvent. The parameters affecting extraction efficiency, such as concentrations of Triton X-114 and Na2SO4, equilibration temperature, equilibration time and centrifugation time were evaluated and optimized. Under the optimum conditions, the method can achieve preconcentration factors of 35, 88, 111 and detection of limits of 2.0, 3.8, 1.0 ng/ml for DEP, DEHP and DCP in 10-ml water sample, respectively. The proposed method was successfully applied to the determination of trace amount of phathalate esters in effluent water of the wastewater treatment plant and the lixivium of plastic fragments.
基金Project supported by the Specific Project Items No.2 in National Long-Term Technology Development Plan(No.2009zx02308-003)
文摘The effect of a non-ionic surfactant on particles removal in post-CMP cleaning was investigated. By changing the concentration of the non-ionic surfactant, a series of experiments were performed on the 12 inch Cu pattern wafers in order to determine the best cleaning results. Then the effect of the surfactant on the reduction of defects and the removal of particles was discussed in this paper. What is more, the negative effect of a non-ionic surfactant was also discussed. Based on the experiment results, it is concluded that the non-ionic surfactant could cause good and ill effects at different concentrations in the post-CMP cleaning process. This understanding will serve as a guide to how much surfactant should be added in order to achieve excellent cleaning performance.
文摘This paper presents a new cleaning process for particle and organic contaminants on polished silicon wafer surfaces.It combines a non-ionic surfactant with boron-doped diamond（BDD） film anode electrochemical oxidation. The non-ionic surfactant is used to remove particles on the polished wafer＇s surface,because it can form a protective film on the surface,which makes particles easy to remove.The effects of particle removal comparative experiments were observed by metallographic microscopy,which showed that the 1%v/v non-ionic surfactant achieved the best result. However,the surfactant film itself belongs to organic contamination,and it eventually needs to be removed.BDD film anode electrochemical oxidation（BDD-EO） is used to remove organic contaminants,because it can efficiently degrade organic matter.Three organic contaminant removal comparative experiments were carried out：the first one used the non-ionic surfactant in the first step and then used BDD-EO,the second one used BDD-EO only,and the last one used RCA cleaning technique.The XPS measurement result shows that the wafer＇s surface cleaned by BDD-EO has much less organic residue than that cleaned by RCA cleaning technique,and the non-ionic surfactant can be efficiently removed by BDD-EO.
文摘The interaction of poly(ethylene oxide)(PEO)with the ionic surfactants,sodium dodecylsulfate(SDS)and cetyltrimethylammonium chloride(CTAC)respectively,in aqueous solutions containing a certain concentration of NH_4Cl, is studied by the viscosity measurement.It has been found that the ion-dipole interaction between PEO and ionic surfactants is changed considerably by the organic salt.For anionic suffactant of SDS,the addition of NH_4Cl into solution strengthens the interaction between PEO and the headgroup o...
文摘High purity Y_2O_3 nano-powders was synthesized directly from solution ofindustrial YCl_3 by method of oxalate precipitation through super-micro-reactors made by complexnon-ionic surfactant. The purity and diameter of Y_2O_3 particles were controlled by such processingparameters as concentration of YCl_3 and oxalic acid and complex non-ionic surfactant etc. TEMphotomicrographs show that Y_2O_3 particles are spherical in shape, with an average diameter of lessthan 30 nm. Test results certify that the purity and particle diameter as well as the dispersion ofY_2O_3 nano-powder depend on the concentrations of YCl_3, oxalic acid and complex non-ionicsurfactant. The optimum ranges of the concentrations for YCl_3 and complex non-ionic surfactant whenthe diameter of Y_2O_3 particles is smaller than 100 nm are 0.43 ～1.4 mol ? L^(-1) and0.031～0.112 mol·L^(-1) respectively, while the mass fraction range of oxalic acid is 10% ～18% .The purity of Y_2O_3 nano-powder tested by ICP-AES analysis is 99.99% .
基金Supported by Cinvestav,M'exico,Consejo Nacional de Ciencia y Tecnología(CONACy T),Mexico and Sistema Nacional de Investigadores(SNI),Mexico
文摘Surfactants, such as non-ionic Surfynol 485 （ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol）, have been applied to accelerate removal of polycyclic aromatic hydrocarbons from soil. This study investigated the dissipation of anthracene, and carbon （C） and nitrogen （N） mineralization in soil amended with non-ionic Surfynol 485 at different rates. Soil samples of a Typic Fragiudept taken from Otumba, Mexico were spiked with anthracene at a final concentration of 520 mg kg^-1 dry soil using acetone as solvent, amended with 0.0, 24.9, 49.8 or 124.4 g kg^-1 soil of the surfactant and incubated in the laboratory. The soil not amended with anthracene, acetone and the surfactant was used as a control. Dynamics of C and N and the concentration of anthracene were monitored for 56 d. After 56 d of incubation, 38% of the anthracene was removed from the unamended soil, and 47%, 55% and 66% of the anthracene were removed when 24.9, 49.8 and 124.4 g kg^-1 of the surfactant were applied, respectively. Application of acetone, anthracene or surfactant increased the emission of CO2, but decreased the mineral N compared to the unamended control. Applying the surfactant to the acetone or anthracene-amended soil reduced emission of CO2, but increased the mineral N at the lower application rates of the surfactant. It was found that the application of the non-ionic surfactant increased the bioavailability of anthracene and thus its removal from soil, increased C mineralization, but decreased N miaeralization. Consequently, the application of non-ionic surfactant could be easily used to accelerate the removal of pollutants from hydrocarbon-contaminated soils, but mineral N in the soil would decrease, which might inhibit plant growth.
文摘In the last few decades numbers of review and research articles have been published on niosomes. This shows the relevant interest of academias & researchers in niosomes because of the advantages sponsored by them over other colloidal drug delivery systems. Niosomes formation occurs when non-ionic surfactant vesicles assemble themselves. Various antineoplastic agents are used in chemotherapy, but they have some drawbacks that these agents cause cell death in normal tissues as well. There are two approaches to overcome this limitation. First, to modify the structure of existing drugs, but this will not possible because it changes the properties of drugs. Second, the development of nano-carriers like liposomes, dendrimers, nanoparticles, niosomes et al. Among all, niosomes (non-ionic surfactant vesicles) have more advantages besides all nano-carriers. Drugs either hydrophilic in nature or hydrophobic in nature, both can be incorporated in niosomes. And by embedding specific ligands over vesicular surface enables us to target the drug to specific cancer cells.
基金Project supported by the Specific Project Items No.2 in National Long-Term Technology Development Plan(No.2009zx02308-003)the Hebei Province Department of Education Fund(No.QN2014208)
文摘A novel cleaning solution, named FA/O alkaline cleaner, was proposed and demonstrated in the removal of colloidal silica abrasives. In order to remove both the chemical and physical absorbed colloidal silica abrasives, an FA/OII chelating agent and non-ionic surfactant were added into the cleaner. By varying the concentration of chelating agent and non-ionic surfactant, a series of experiments were performed to determine the best cleaning results. This paper discusses the mechanism of the removal of colloidal silica abrasives with a FA/O alkaline cleaner. Based on the experiment results, it is concluded that both the FA/OII chelating and non-ionic surfactant could benefit the removal of colloidal silica abrasives. When the concentration of FAJOII chelating agent and FA/O non-ionic surfactant reached the optima value, it was demonstrated that silica abrasives could be removed efficiently by this novel cleaning solution.
基金Project supported by the Special Project Items No.2 in National Long-Term Technology Development Plan(No.2009ZX02308)the Natural Science Foundation of Hebei Province(No.E2013202247)+2 种基金the Science and Technology Plan Project of Hebei Province(Nos.Z2010112,10213936)the Hebei Provincial Department of Education Fund(No.2011128)the Scientific Research Fund of Hebei Provincial Education(No.QN2014208)
文摘This paper investigated the effect of FA/O and hydrogen peroxide （H2O2） on ruthenium （Ru） removal rate （RR） and static etching rate （SER）. It was revealed that Ru RR and SER first linearly increased then slowly decreaseed with the increasing H2O2 probably due to the formation of uniform Ru oxides on the surface during polishing. Their corrosion behaviors and states of surface oxidation were analyzed. In addition, FA/O could chelate Ru oxides （such as （RuO4）2- and RUO4- changed into soluble amine salts [R（NH3）4] （RuO4）2） and enhance Ru RR. The non-ionic surfactant AD was used to improve the Ru CMP performance. In particular, the addition of AD can lead to significant improvement of the surface roughness.
基金Project supported by the Major National Science and Technology Special Projects(No.2009ZX02308)
文摘This work investigates systematically the effect of FA/O II chelating agent and FA/O I surfactant in alkaline cleaning solutions on benzotriazole （BTA） removal during post-Cu CMP cleaning in GLSI under the con- dition of static etching. The best detergent formulation for BTA removal can be determined by optimization of the experiments of single factor and compound cleaning solution, which has been further confirmed experimentally by contact angle （CA） measurements. The resulting solution with the best formulation has been measured for the actual production line, and the results demonstrate that the obtained cleaning solution can effectively and efficiently remove BTA, CuO and abrasive SiO2 without basically causing interfacial corrosion. This work demonstrates the possibility of developing a simple, low-cost and environmentally-friendly cleaning solution to effectively solve the issues of BTA removal on post-Cu CMP cleaning in a multi-layered copper wafer.
基金financially supported by the Payame Noor University,Iran
文摘In this communication,we report four component condensations of acetophenone,arylaldehydes,arylthiol,and malononitrile in the presence of Triton X-100（5 mol%） aqueous micelles.This reaction led to the formation of 4,6-diaryl-2-（arylthio）nicotinonitrile new derivatives in good yields.The FT-IR,^19F NMR,^1H NMR,^13C NMR spectra and elemental analysis confirm the structure of compounds.
