The zirconium(Zr)alloy fuel cladding is one of the key structural components of a nuclear reactor and the first and most important line of defense for accommodating fission products.During the operation of nuclear rea...The zirconium(Zr)alloy fuel cladding is one of the key structural components of a nuclear reactor and the first and most important line of defense for accommodating fission products.During the operation of nuclear reactors,Zr alloy fuel cladding is subjected to extreme harsh environments,such as high temperature,high pressure and high flow rate for a long period of time.The wear and corrosion resistance of Zr alloys is important for the safe operation of nuclear reactors.Surface modification can effectively improve the corrosion and wear resistance of fuel cladding.Compared with coating technology,nitriding technology does not have problems for bonding between the coating and the substrate.Current research on surface nitriding of Zr alloys mainly focuses on plasma nitriding and ion implantation techniques.Research on laser nitriding of Zr alloy surfaces and their fretting wear characteristics is scarce.In this study,the surface of Zr alloy was treated with laser nitriding at different laser energies.The microstructure of Zr alloy treated with different laser energies and its fretting wear performance were studied.The results showed that after nitriding with different laser energies,the surface of the Zr alloy showed a typical molten state after melting,vaporizing and cooling under the thermal effect of the laser,and this state was more obvious with the increase of the laser energy.At the same time,doping of N atoms and formation of the ZrN phase led to different cooling rates in the molten zone that produced large tensile stresses after cooling.This led to cracks on the surface of Zr alloys after laser nitriding at different energies,and the crack density increased with increasing laser energy.This also led to an increase in the surface roughness of the Zr alloy with increasing laser energy after laser nitriding treatment.Due to the presence of water in the industrial nitrogen,nitrides were generated on the surface of the sample along with some oxides.When the laser energy was 100 mJ,there was no ZrN generation,and N existed mainly as a diffusion layer within the Zr alloy substrate.ZrN generated when the laser energy reached 200 mJ and above,which increased with the increase of laser energy.Due to the generation of ZrN phase and the presence of some oxides,the surface Vickers hardness of Zr alloys after laser nitriding treatment at different energies increased by 37.5%compared to Zr alloys.After laser nitriding treatment,the wear mechanism of Zr alloys changed.For the untreated Zr alloys,the wear mechanism was dominated by delamination and spalling wear,accompanied by oxidative and abrasive wear.The phenomenon of delamination and peeling decreased with the increase of laser energy.Wear mechanisms changed to predominantly abrasive wear with oxidative wear and delamination spalling.The wear volume of sample nitriding with laser energy 400 mJ was reduced by 46.5%compared with that of untreated Zr alloy.展开更多
Titanium nitride films are prepared by plasma enhanced chemical vapor deposition method on titanium foil using N_(2) as precursor. In order to evaluate the effect of oxygen on the growth of titanium nitride films, a s...Titanium nitride films are prepared by plasma enhanced chemical vapor deposition method on titanium foil using N_(2) as precursor. In order to evaluate the effect of oxygen on the growth of titanium nitride films, a small amount of O_(2) is introduced into the preparation process. The study indicates that trace O_(2) addition into the reaction chamber gives rise to significant changes on the color and micro-morphology of the foil, featuring dense and long nano-wires. The as-synthesized nanostructures are characterized by various methods and identified as TiN, Ti_(2) N, and TiO_(2) respectively. Moreover, the experiment results show that oxide nanowire has a high degree of crystallinity and the nitrides present specific orientation relationships with the titanium matrix.展开更多
Lowering the synthesis temperature of boron nitride nanotubes(BNNTs)is crucial for their development.The primary reason for adopting a high temperature is to enable the effective activation of highmelting-point solid ...Lowering the synthesis temperature of boron nitride nanotubes(BNNTs)is crucial for their development.The primary reason for adopting a high temperature is to enable the effective activation of highmelting-point solid boron.In this study,we developed a novel approach for efficiently activating boron by introducing alkali metal compounds into the conventional MgO–B system.This approach can be adopted to form various low-melting-point AM–Mg–B–O growth systems.These growth systems have improved catalytic capability and reactivity even under low-temperature conditions,facilitating the synthesis of BNNTs at temperatures as low as 850℃.In addition,molecular dynamics simulations based on density functional theory theoretically demonstrate that the systems maintain a liquid state at low temperatures and interact with N atoms to form BN chains.These findings offer novel insights into the design of boron activation and are expected to facilitate research on the low-temperature synthesis of BNNTs.展开更多
Graphitic carbon nitride(g-C3N4)exhibits great mechanical as well as thermal characteristics,making it a valuable ma-terial for use in photoelectric conversion devices,an accelerator for synthesis of organic compounds...Graphitic carbon nitride(g-C3N4)exhibits great mechanical as well as thermal characteristics,making it a valuable ma-terial for use in photoelectric conversion devices,an accelerator for synthesis of organic compounds,an electrolyte for fuel cell applications or power sources,and a hydrogen storage substance and a fluorescence detector.It is fabricated using dif-ferent methods,and there is a variety of morphologies and nanostructures such as zero to three dimensions that have been designed for different purposes.Ther e are many reports about g-C3N4 in recent years,but a comprehensive review which covers nanostructure dimensions and their properties are missing.This review paper aims to give basic and comprehensive understanding of the photocatalytic and electrocatalytic usages of g-C3N4.It highlights the recent progress of g-C3N4 nano-structure designing by covering synthesis methods,dimensions,morphologies,applications and properties.Along with the summary,we will also discuss the challenges and prospects.Scientists,investigators,and engineers looking at g-C3N4 nanostructures for a variety of applications might find our review paper to be a useful resource.展开更多
Lithium-sulfur batteries are considered as one of the potential solutions as integrating renewable energy systems for large-scale energy storage because of their high theoretical energy density(2600 Wh·kg^(-1))an...Lithium-sulfur batteries are considered as one of the potential solutions as integrating renewable energy systems for large-scale energy storage because of their high theoretical energy density(2600 Wh·kg^(-1))and specific capacity(1675 mAh·g^(-1)).Currently,various strategies have been proposed to overcome the technical barriers,e.g.,“shuttle effect”,capacity decay and volumetric change,which impede the successful commercialization of lithium-sulfur batteries.This paper reviews the applications of metal nitrides as the cathode hosts for high-performance lithium-sulfur batteries,summa-rizes the design strategies of different host materials,and discusses the relationship between the properties of metal nitrides and their electrochemical performances.Finally,reasonable suggestions for the design and development of metal nitrides,along with ideas to promote future breakthroughs,are proposed.We hope that this review could attract more attention to metal nitrides and their derivatives,and further promote the electrochemical performance of lithium-sulfur batteries.展开更多
Molybdenum nitride,renowned for its exceptional physical and chemical properties,has garnered extensive attention and research interest.In this study,we employed first-principles calculations and the CALYPSO structure...Molybdenum nitride,renowned for its exceptional physical and chemical properties,has garnered extensive attention and research interest.In this study,we employed first-principles calculations and the CALYPSO structure prediction method to conduct a comprehensive analysis of the crystal structures and electronic properties of molybdenum nitride(Mo_(x)N_(1-x))under high pressure.We discovered two novel high-pressure phases:Imm2-MoN_(3) and Cmmm-MoN_(4),and confirmed their stability through the analysis of elastic constants and phonon dispersion curves.Notably,the MoN_(4) phase,with its high Vickers hardness of 36.9 GPa,demonstrates potential as a hard material.The results of this study have broadened the range of known high-pressure phases of molybdenum nitride,providing the groundwork for future theoretical and experimental researches.展开更多
Thick electrodes can reduce the ratio of inactive constituents in a holistic energy storage system while improving energy and power densities.Unfortunately,traditional slurry-casting electrodes induce high-tortuous io...Thick electrodes can reduce the ratio of inactive constituents in a holistic energy storage system while improving energy and power densities.Unfortunately,traditional slurry-casting electrodes induce high-tortuous ionic diffusion routes that directly depress the capacitance with a thickening design.To overcome this,a novel 3D low-tortuosity,self-supporting,wood-structured ultrathick electrode(NiMoN@WC,a thickness of~1400 mm)with hierarchical porosity and artificial array-distributed small holes was constructed via anchoring bimetallic nitrides into the monolithic wood carbons.Accompanying the embedded NiMoN nanoclusters with well-designed geometric and electronic structure,the vertically low-tortuous channels,enlarged specific surface area and pore volume,superhydrophilic interface,and excellent charge conductivities,a superior capacitance of NiMoN@WC thick electrodes(~5350 mF cm^(-2)and 184.5 F g^(-1))is achieved without the structural deformation.In especial,monolithic wood carbons with gradient porous network not only function as the high-flux matrices to ameliorate the NiMoN loading via cell wall engineering but also allow fully-exposed electroactive substance and efficient current collection,thereby deliver an acceptable rate capability over 75%retention even at a high sweep rate of 20 mA cm^(-2).Additionally,an asymmetric NiMoN@WC//WC supercapacitor with an available working voltage of 1.0-1.8 V is assembled to demonstrate a maximum energy density of~2.04 mWh cm^(-2)(17.4 Wh kg^(-1))at a power density of 1620 mW cm^(-2),along with a decent long-term lifespan over 10,000 charging-discharging cycles.As a guideline,the rational design of wood ultrathick electrode with nanostructured transition metal nitrides sketch a promising blueprint for alleviating global energy scarcity while expanding carbon-neutral technologies.展开更多
FeCoCrMnNiN_(x)high entropy nitride ceramics thin films were prepared using the magnetron sputtering method,and the effects of nitrogen content on the thin films’properties were later examined.The addition of N_(2)af...FeCoCrMnNiN_(x)high entropy nitride ceramics thin films were prepared using the magnetron sputtering method,and the effects of nitrogen content on the thin films’properties were later examined.The addition of N_(2)affected the microstructures of the thin films and their mechanical and corrosion properties.Compared with the FeCoCrMnNi thin films with 1-sccm N_(2),the addition of 2 and 3 sccm of N_(2)by as much as 5.45at%and 6.34at%changed the solid solution’s crystalline structure into an amorphous structure.The addition of nitro-gen caused drastic changes to the surface morphology,creating a smoother and more uniform surface without cauliflower units.The atomic force microscopy image analysis indicated that the addition of nitrogen reduced the surface roughness from 5.58 to 1.82 nm.Adding N_(2)to the CoCrFeMnNi thin film helped increase its mechanical properties,such as hardness and strength,while the Young’s modulus decreased.The hardness of(8.75±0.5)GPa and the reduced Young’s modulus of(257.37±11.4)GPa of the FeCoCrMnNi thin film reached(12.67±1.2)and(194.39±12.4)GPa,respectively,with 1 sccm N_(2).The applied coating of the CoCrFeMnNi thin film on 304SUS increased the corrosion resistance,whereas the addition of nitrogen to the CoCrFeMnNi thin film also improved its corrosion res-istance compared with that of the CoCrFeMnNi thin film without nitrogen.展开更多
Harnessing solar energy for renewable fuel production through artificial photosynthesis offers an ideal solution to the current energy and environmental crises.Among various methods,photoelectrochemical(PEC)water spli...Harnessing solar energy for renewable fuel production through artificial photosynthesis offers an ideal solution to the current energy and environmental crises.Among various methods,photoelectrochemical(PEC)water splitting stands out as a promising approach for direct solar-driven hydrogen production.Enhancing the efficiency and stability of photoelectrodes is a key focus in PEC water-splitting research.Tantalum nitride(Ta_(3)N_(5)),with its suitable band gap and band-edge positions for PEC water splitting,has emerged as a highly promising photoanode material.This review begins by introducing the history and fundamental characteristics of Ta_(3)N_(5),emphasizing both its advantages and challenges.It then explores methods to improve light absorption efficiency,charge separation and transfer efficiency,surface reaction rate,and the stability of Ta_(3)N_(5) photoanodes.Additionally,the review discusses the progress of research on tandem PEC cells incorporating Ta_(3)N_(5) photoanodes.Finally,it looks ahead to future research directions for Ta_(3)N_(5) photoanodes.The strategic approach outlined in this review can also be applied to other photoelectrode materials,providing guidance for their development.展开更多
An integrated low-temperature nitriding process was carried out for Ti6Al4V to investigateitseffect on microstructure and properties.The process was designed to enhance the nitriding kinetics in low-temperature（500℃...An integrated low-temperature nitriding process was carried out for Ti6Al4V to investigateitseffect on microstructure and properties.The process was designed to enhance the nitriding kinetics in low-temperature（500℃） nitriding by deformation, and to strengthen Ti6Al4V alloybydispersionat the same time. Specimens of Ti6Al4V alloyweretreated through the process of solid solutionstrengthening-cold deformation-nitriding at 500℃. The white nitriding layeris formed after some time and then kept stable, changing little withthedeformationdegreeand time. The effect of aging on substrate is significant. Surface hardness and substrate hardnessincrease with deformation increasing. The construction was investigated by XRD.The surface nitridesare TiN, Ti2N, Ti4N3-Xand Ti3N1.29,and thenitridesin cross-section are Ti3N1.29and TiN0.3. The wear tests of specimens after nitriding, aging and deformation were carried out,andthetest data show that the nitrided pieces have the best wear resistance.展开更多
Medical forged CoCrMo alloy was treated by plasma nitriding process.The microstructures were characterized by 3Dprofiler,SEM and XRD.The tribological properties were investigated under lubrication of 25% bovine serum ...Medical forged CoCrMo alloy was treated by plasma nitriding process.The microstructures were characterized by 3Dprofiler,SEM and XRD.The tribological properties were investigated under lubrication of 25% bovine serum solution.Resultsshow that plasma nitriding is a promising process to produce thick,hard,and more wear resistant layers on the surface of CoCrMoalloy.All nitrided samples showed an important increase in the surface hardness due to the formation of harder CrN andCrN phases with compact nano-crystalline structures.The typical hardness values of HVincreased almost two times thanuntreated one.Under bovine serum lubrication,at low nitriding temperature the Coefficient of Friction (COF) of nitrided samplewas lower than that of untreated sample,but at high nitriding temperature the COF was almost the same as the untreated one.Compared with the untreated sample,the nitrided samples showed lower wear rates and higher wear resistance under differentnitriding temperatures.The adhesive wear is the main mechanism for untreated CoCrMo alloy and the wear mechanisms ofnitrided ones are the fatigue wear and slight adhesive wear.It is concluded that the improvement of wear resistance is ascribed tothe hard nitride formation of CrN and CrN phases at the nitrided surfaces.展开更多
The behavior of gaseous nitriding on the surface nanocrystallized (SNCed) steel was investigated. The mild steel discs were SNCed on one side by using the method of ultrasonic shot peening. The opposite side of the di...The behavior of gaseous nitriding on the surface nanocrystallized (SNCed) steel was investigated. The mild steel discs were SNCed on one side by using the method of ultrasonic shot peening. The opposite side of the discs maintained the original coarse-grained condition. The gaseous nitriding was subsequently carried out at three different temperatures: 460, 500 and 560℃. The compound layer growth and diffusion behavior were then studied. It was revealed that SNC pretreatment greatly enhances both diffusion coefficient D and surface reaction rate. As a result, nitriding time could be reduced to the half. It was also found that the growth of compound layer with nitriding time conformed with parabolic relationship from the start of nitriding process in the SNCed samples.展开更多
Medium-carbon alloy steel was plasma nitrided with rare earths La, Ce and Nd into the nitriding chamber respectively. The nitriding layer microstructures with and without rare earths were compared using optical micros...Medium-carbon alloy steel was plasma nitrided with rare earths La, Ce and Nd into the nitriding chamber respectively. The nitriding layer microstructures with and without rare earths were compared using optical microscope,normal SEM and high resolution SEM, as well as TEM. It was found that the extent of the influence on plasma nitriding varies with different contents of rare earth. The effect of plasma nitriding is benefit from adding of Ce or Nd. The formation of hard and brittle phase Fe_(2-3)N can be prevented and the butterfly-like structure can be improved by adding Ce or Nd. However, pure La may prevent the diffusion of nitrogen and the formation of iron nitride, and reduce the depth of diffusion layer.展开更多
The mixing technology of laser and heated nitrogen was applied to improve the surface hardness of titanium alloy （ TC4 ）. The samples were nitrided with laser power density of 6.S × 10^6SW. cm^-2, the scanning ...The mixing technology of laser and heated nitrogen was applied to improve the surface hardness of titanium alloy （ TC4 ）. The samples were nitrided with laser power density of 6.S × 10^6SW. cm^-2, the scanning speed varioas from 100 to 500mm ·min^-1. The nitrogen gas was pre-heated to 300℃ to accelerate the nitriding process. Some interested samples were tested with XRD method （X-ray diffraction） to analyze the composition of nitrides, and the surface hardness of HV was measured. The results show that TiN and Ti2N were formed on the surface of Ti alloy with proper nitriding parameters, but TiN is the main composition. The surface hardness increased by three times, which is from the original value of 269to 794kg·mm^-2. The mechanism of the mixing technology is considered mainly of the activation of nitrogen by laser power and the pre-heated process which accelerated the nitriding process. The nitridation process can be considered as six steps given in detail. The result by analyzing the mechanism of improving the surface property of TiAl alloy shows the improvement of surface property due to two factors： the first reason is the result of laser annealing, and the second one is the formation of TiN.展开更多
A composite layer was prepared on the surface of Ti-6Al-4V alloy by nitriding-sulfurizing composite treatment,and its microstructure and phase structure were examined by scanning electron microscopy（SEM） and X-ray d...A composite layer was prepared on the surface of Ti-6Al-4V alloy by nitriding-sulfurizing composite treatment,and its microstructure and phase structure were examined by scanning electron microscopy（SEM） and X-ray diffraction（XRD）,respectively.The tribological performance was measured to investigate its dependence on the nitriding-sulfurizing composite treatment process.The results indicated that the composite layer was mainly comprised of Ti2N,TiN,and TiS2.It was found that the composite layer exhibited superior tribological properties under dry friction and absolute sliding conditions due to the formation of sulfides with self-lubricating function.展开更多
β-Sialon was produced by carbon thermal nitriding reaction in N_2 gas atmosphere when the mixtures of bauxite and anthracite were put into vertical furnace. According to the mass loss of raw materials and the result ...β-Sialon was produced by carbon thermal nitriding reaction in N_2 gas atmosphere when the mixtures of bauxite and anthracite were put into vertical furnace. According to the mass loss of raw materials and the result of X-ray diffration (XRD) of products, the influences of the process parameters on the compositions and relative contents of products, such as the fixed carbon content, the flow of N2, the soaking time and the temperature, were researched.展开更多
Plasma rare earth nitriding of nanocrystallized surface layer of 3J33B steel at 350 and 410℃ for different time was studied. The microstructure observation and X-ray diffraction（XRD） analysis show that the nitrid...Plasma rare earth nitriding of nanocrystallized surface layer of 3J33B steel at 350 and 410℃ for different time was studied. The microstructure observation and X-ray diffraction（XRD） analysis show that the nitriding layer consists of compound layer （γ′-Fe4N） and diffusion layer （α-Fe）. Lanthanum content profiles in nanocrystallized surface layer were measured using glow discharge spectometry（GDS）. The results show that lanthanum can diffuse into the surface layer of the steel to a large depth. Based on the experimental results mentioned above, the diffusion coefficients and activation energy of lanthanum in γ′ phase are calculated to be 1.03×10 -15 cm2/s （350℃）, 1.75×10 -15 cm2/s （410℃） and 31.313kJ/mol, respectively.展开更多
CW-CO2 laser nitriding technique was applied to improve the properties （such as aging property and the core loss） of grain oriented silicon steel. The samples were nitrided with regular space. Laser power density an...CW-CO2 laser nitriding technique was applied to improve the properties （such as aging property and the core loss） of grain oriented silicon steel. The samples were nitrided with regular space. Laser power density and scanning speed were chosen as 7.8×10^5W·cm^-2 and 100mm·min^-1. By some laser irradiation, Fe4N and Fe3N were formed in the nitrided zone. The nitrided samples were annealed at the temperatures ranged from 100 to 90℃. The core loss of some interested samples was tested. The results show that the core loss of the nitrided samples with different thickness of 0.23 and 0.30mm decreased by 14.9% and 9.4% respectively, and the aging property were improved up to 800℃. The mechanism of laser nitriding to improve the properties of grain oriented silicon steel is discussed.展开更多
A series of experiments were carried out to study the influence of low temperature plasma nitriding on the mechanical properties of AISI 420 martensitic stainless steel. Plasma nitriding experiments were carried out f...A series of experiments were carried out to study the influence of low temperature plasma nitriding on the mechanical properties of AISI 420 martensitic stainless steel. Plasma nitriding experiments were carried out for 15 h at 350℃ by means of DC- pulsed plasma in 25%N2＋ 75%H2 atmosphere. The microstructure, phase composition, and residual stresses profiles of the nitrided layers were determined by optical microscopy and X-ray diffraction. The microhardness profiles of the nitridied surfaces were also studied. The fatigue life, sliding wear, and erosion wear loss of the untreated specimens and plasma nitriding specimens were determined on the basis of a rotating bending fatigue tester, a ball-on-disc wear tester, and a solid particle erosion tester. The results show that the 350℃ nitrided surface is dominated by c-Fe3N and ON, which is supersaturated nitrogen solid solution. They have high hardness and chemical stabilities. So the low temperature plasma nitriding not only increases the surface hardness values but also improves the wear and erosion resistance. In addition, the fatigue limit of AISI 420 steel can also be improved by plasma nitriding at 350℃ because plasma nitriding produces residual compressive stress inside the modified layer.展开更多
This study aims to draw an exact boundary for microstructural and mechanical behaviors in terms of pulsed plasma nitriding conditions.The pulsed plasma nitriding treatment was applied to AISI 304 austenitic stainless ...This study aims to draw an exact boundary for microstructural and mechanical behaviors in terms of pulsed plasma nitriding conditions.The pulsed plasma nitriding treatment was applied to AISI 304 austenitic stainless steel at different temperatures and durations.Results reveal that nitriding depth increased as process temperature and duration increase.The nitriding depth remarkably increased at 475℃for 8 h and at 550℃for 4 h.An austenite structure was transformed into a metastable nitrogen-oversaturated body-centered tetragonal expanded austenite(S-phase)during low-temperature plasma nitriding.The S-phase was converted to CrN precipitation at 475℃for 8 h and at 550℃for 4 h.Surface hardness and fatigue limit increased through plasma nitriding regardless of process conditions.The best surface hardness and fatigue limit were obtained at 550℃for 4 h because of the occurrence of CrN precipitation.展开更多
文摘The zirconium(Zr)alloy fuel cladding is one of the key structural components of a nuclear reactor and the first and most important line of defense for accommodating fission products.During the operation of nuclear reactors,Zr alloy fuel cladding is subjected to extreme harsh environments,such as high temperature,high pressure and high flow rate for a long period of time.The wear and corrosion resistance of Zr alloys is important for the safe operation of nuclear reactors.Surface modification can effectively improve the corrosion and wear resistance of fuel cladding.Compared with coating technology,nitriding technology does not have problems for bonding between the coating and the substrate.Current research on surface nitriding of Zr alloys mainly focuses on plasma nitriding and ion implantation techniques.Research on laser nitriding of Zr alloy surfaces and their fretting wear characteristics is scarce.In this study,the surface of Zr alloy was treated with laser nitriding at different laser energies.The microstructure of Zr alloy treated with different laser energies and its fretting wear performance were studied.The results showed that after nitriding with different laser energies,the surface of the Zr alloy showed a typical molten state after melting,vaporizing and cooling under the thermal effect of the laser,and this state was more obvious with the increase of the laser energy.At the same time,doping of N atoms and formation of the ZrN phase led to different cooling rates in the molten zone that produced large tensile stresses after cooling.This led to cracks on the surface of Zr alloys after laser nitriding at different energies,and the crack density increased with increasing laser energy.This also led to an increase in the surface roughness of the Zr alloy with increasing laser energy after laser nitriding treatment.Due to the presence of water in the industrial nitrogen,nitrides were generated on the surface of the sample along with some oxides.When the laser energy was 100 mJ,there was no ZrN generation,and N existed mainly as a diffusion layer within the Zr alloy substrate.ZrN generated when the laser energy reached 200 mJ and above,which increased with the increase of laser energy.Due to the generation of ZrN phase and the presence of some oxides,the surface Vickers hardness of Zr alloys after laser nitriding treatment at different energies increased by 37.5%compared to Zr alloys.After laser nitriding treatment,the wear mechanism of Zr alloys changed.For the untreated Zr alloys,the wear mechanism was dominated by delamination and spalling wear,accompanied by oxidative and abrasive wear.The phenomenon of delamination and peeling decreased with the increase of laser energy.Wear mechanisms changed to predominantly abrasive wear with oxidative wear and delamination spalling.The wear volume of sample nitriding with laser energy 400 mJ was reduced by 46.5%compared with that of untreated Zr alloy.
基金Project supported by the Innovation Funding of Beijing Institute of Aeronautical Materials。
文摘Titanium nitride films are prepared by plasma enhanced chemical vapor deposition method on titanium foil using N_(2) as precursor. In order to evaluate the effect of oxygen on the growth of titanium nitride films, a small amount of O_(2) is introduced into the preparation process. The study indicates that trace O_(2) addition into the reaction chamber gives rise to significant changes on the color and micro-morphology of the foil, featuring dense and long nano-wires. The as-synthesized nanostructures are characterized by various methods and identified as TiN, Ti_(2) N, and TiO_(2) respectively. Moreover, the experiment results show that oxide nanowire has a high degree of crystallinity and the nitrides present specific orientation relationships with the titanium matrix.
基金supported by the National Natural Science Foundation of China(No.51972162)the Fundamental Research Funds for the Central Universities(No.2024300440).
文摘Lowering the synthesis temperature of boron nitride nanotubes(BNNTs)is crucial for their development.The primary reason for adopting a high temperature is to enable the effective activation of highmelting-point solid boron.In this study,we developed a novel approach for efficiently activating boron by introducing alkali metal compounds into the conventional MgO–B system.This approach can be adopted to form various low-melting-point AM–Mg–B–O growth systems.These growth systems have improved catalytic capability and reactivity even under low-temperature conditions,facilitating the synthesis of BNNTs at temperatures as low as 850℃.In addition,molecular dynamics simulations based on density functional theory theoretically demonstrate that the systems maintain a liquid state at low temperatures and interact with N atoms to form BN chains.These findings offer novel insights into the design of boron activation and are expected to facilitate research on the low-temperature synthesis of BNNTs.
基金M Tahir is funded by EU H2020 Marie Skłodows-ka-Curie Fellowship(1439425).
文摘Graphitic carbon nitride(g-C3N4)exhibits great mechanical as well as thermal characteristics,making it a valuable ma-terial for use in photoelectric conversion devices,an accelerator for synthesis of organic compounds,an electrolyte for fuel cell applications or power sources,and a hydrogen storage substance and a fluorescence detector.It is fabricated using dif-ferent methods,and there is a variety of morphologies and nanostructures such as zero to three dimensions that have been designed for different purposes.Ther e are many reports about g-C3N4 in recent years,but a comprehensive review which covers nanostructure dimensions and their properties are missing.This review paper aims to give basic and comprehensive understanding of the photocatalytic and electrocatalytic usages of g-C3N4.It highlights the recent progress of g-C3N4 nano-structure designing by covering synthesis methods,dimensions,morphologies,applications and properties.Along with the summary,we will also discuss the challenges and prospects.Scientists,investigators,and engineers looking at g-C3N4 nanostructures for a variety of applications might find our review paper to be a useful resource.
文摘Lithium-sulfur batteries are considered as one of the potential solutions as integrating renewable energy systems for large-scale energy storage because of their high theoretical energy density(2600 Wh·kg^(-1))and specific capacity(1675 mAh·g^(-1)).Currently,various strategies have been proposed to overcome the technical barriers,e.g.,“shuttle effect”,capacity decay and volumetric change,which impede the successful commercialization of lithium-sulfur batteries.This paper reviews the applications of metal nitrides as the cathode hosts for high-performance lithium-sulfur batteries,summa-rizes the design strategies of different host materials,and discusses the relationship between the properties of metal nitrides and their electrochemical performances.Finally,reasonable suggestions for the design and development of metal nitrides,along with ideas to promote future breakthroughs,are proposed.We hope that this review could attract more attention to metal nitrides and their derivatives,and further promote the electrochemical performance of lithium-sulfur batteries.
基金Project supported by the National Natural Science Foundation of China(Grant No.11964026)the Natural Science Foundation of Inner Mongolia,China(Grant Nos.2019MS01010 and 2023LHMS01014)+4 种基金Higher Educational Scientific Research Projects of Inner Mongolia(Grant Nos.NJZZ19145 and NJZZ22470)the Educational Scientific Research Project of Liaoning Province(Grant No.LJKZ0452)the Doctoral Starting up Foundation of Inner Mongolia Minzu University of Science and Technology(Grant No.BSZ023)Inner Mongolia Autonomous Region Youth Capacity Improvement Project(Grant No.GXKY22157)Higher Physics Major Teaching Steering Committee of the Ministry of Education Project(Grant No.JZW-23-GT-21)。
文摘Molybdenum nitride,renowned for its exceptional physical and chemical properties,has garnered extensive attention and research interest.In this study,we employed first-principles calculations and the CALYPSO structure prediction method to conduct a comprehensive analysis of the crystal structures and electronic properties of molybdenum nitride(Mo_(x)N_(1-x))under high pressure.We discovered two novel high-pressure phases:Imm2-MoN_(3) and Cmmm-MoN_(4),and confirmed their stability through the analysis of elastic constants and phonon dispersion curves.Notably,the MoN_(4) phase,with its high Vickers hardness of 36.9 GPa,demonstrates potential as a hard material.The results of this study have broadened the range of known high-pressure phases of molybdenum nitride,providing the groundwork for future theoretical and experimental researches.
基金support from the National Natural Science Foundation of China(32171728)Wuhan Knowledge Innovation Project(2022020801020312).
文摘Thick electrodes can reduce the ratio of inactive constituents in a holistic energy storage system while improving energy and power densities.Unfortunately,traditional slurry-casting electrodes induce high-tortuous ionic diffusion routes that directly depress the capacitance with a thickening design.To overcome this,a novel 3D low-tortuosity,self-supporting,wood-structured ultrathick electrode(NiMoN@WC,a thickness of~1400 mm)with hierarchical porosity and artificial array-distributed small holes was constructed via anchoring bimetallic nitrides into the monolithic wood carbons.Accompanying the embedded NiMoN nanoclusters with well-designed geometric and electronic structure,the vertically low-tortuous channels,enlarged specific surface area and pore volume,superhydrophilic interface,and excellent charge conductivities,a superior capacitance of NiMoN@WC thick electrodes(~5350 mF cm^(-2)and 184.5 F g^(-1))is achieved without the structural deformation.In especial,monolithic wood carbons with gradient porous network not only function as the high-flux matrices to ameliorate the NiMoN loading via cell wall engineering but also allow fully-exposed electroactive substance and efficient current collection,thereby deliver an acceptable rate capability over 75%retention even at a high sweep rate of 20 mA cm^(-2).Additionally,an asymmetric NiMoN@WC//WC supercapacitor with an available working voltage of 1.0-1.8 V is assembled to demonstrate a maximum energy density of~2.04 mWh cm^(-2)(17.4 Wh kg^(-1))at a power density of 1620 mW cm^(-2),along with a decent long-term lifespan over 10,000 charging-discharging cycles.As a guideline,the rational design of wood ultrathick electrode with nanostructured transition metal nitrides sketch a promising blueprint for alleviating global energy scarcity while expanding carbon-neutral technologies.
文摘FeCoCrMnNiN_(x)high entropy nitride ceramics thin films were prepared using the magnetron sputtering method,and the effects of nitrogen content on the thin films’properties were later examined.The addition of N_(2)affected the microstructures of the thin films and their mechanical and corrosion properties.Compared with the FeCoCrMnNi thin films with 1-sccm N_(2),the addition of 2 and 3 sccm of N_(2)by as much as 5.45at%and 6.34at%changed the solid solution’s crystalline structure into an amorphous structure.The addition of nitro-gen caused drastic changes to the surface morphology,creating a smoother and more uniform surface without cauliflower units.The atomic force microscopy image analysis indicated that the addition of nitrogen reduced the surface roughness from 5.58 to 1.82 nm.Adding N_(2)to the CoCrFeMnNi thin film helped increase its mechanical properties,such as hardness and strength,while the Young’s modulus decreased.The hardness of(8.75±0.5)GPa and the reduced Young’s modulus of(257.37±11.4)GPa of the FeCoCrMnNi thin film reached(12.67±1.2)and(194.39±12.4)GPa,respectively,with 1 sccm N_(2).The applied coating of the CoCrFeMnNi thin film on 304SUS increased the corrosion resistance,whereas the addition of nitrogen to the CoCrFeMnNi thin film also improved its corrosion res-istance compared with that of the CoCrFeMnNi thin film without nitrogen.
文摘Harnessing solar energy for renewable fuel production through artificial photosynthesis offers an ideal solution to the current energy and environmental crises.Among various methods,photoelectrochemical(PEC)water splitting stands out as a promising approach for direct solar-driven hydrogen production.Enhancing the efficiency and stability of photoelectrodes is a key focus in PEC water-splitting research.Tantalum nitride(Ta_(3)N_(5)),with its suitable band gap and band-edge positions for PEC water splitting,has emerged as a highly promising photoanode material.This review begins by introducing the history and fundamental characteristics of Ta_(3)N_(5),emphasizing both its advantages and challenges.It then explores methods to improve light absorption efficiency,charge separation and transfer efficiency,surface reaction rate,and the stability of Ta_(3)N_(5) photoanodes.Additionally,the review discusses the progress of research on tandem PEC cells incorporating Ta_(3)N_(5) photoanodes.Finally,it looks ahead to future research directions for Ta_(3)N_(5) photoanodes.The strategic approach outlined in this review can also be applied to other photoelectrode materials,providing guidance for their development.
基金Projects(51275105,51375106)supported by the National Natural Science Foundation of China
文摘An integrated low-temperature nitriding process was carried out for Ti6Al4V to investigateitseffect on microstructure and properties.The process was designed to enhance the nitriding kinetics in low-temperature（500℃） nitriding by deformation, and to strengthen Ti6Al4V alloybydispersionat the same time. Specimens of Ti6Al4V alloyweretreated through the process of solid solutionstrengthening-cold deformation-nitriding at 500℃. The white nitriding layeris formed after some time and then kept stable, changing little withthedeformationdegreeand time. The effect of aging on substrate is significant. Surface hardness and substrate hardnessincrease with deformation increasing. The construction was investigated by XRD.The surface nitridesare TiN, Ti2N, Ti4N3-Xand Ti3N1.29,and thenitridesin cross-section are Ti3N1.29and TiN0.3. The wear tests of specimens after nitriding, aging and deformation were carried out,andthetest data show that the nitrided pieces have the best wear resistance.
基金the supports by Tribology Science Fund State Key Laboratory of Tribology (SKLT) at Tsinghua University(SKLTKF08A01)Fundamental Research Funds for the Central UniversitiesNational Natural Science Foundation of China (No.51005234)
文摘Medical forged CoCrMo alloy was treated by plasma nitriding process.The microstructures were characterized by 3Dprofiler,SEM and XRD.The tribological properties were investigated under lubrication of 25% bovine serum solution.Resultsshow that plasma nitriding is a promising process to produce thick,hard,and more wear resistant layers on the surface of CoCrMoalloy.All nitrided samples showed an important increase in the surface hardness due to the formation of harder CrN andCrN phases with compact nano-crystalline structures.The typical hardness values of HVincreased almost two times thanuntreated one.Under bovine serum lubrication,at low nitriding temperature the Coefficient of Friction (COF) of nitrided samplewas lower than that of untreated sample,but at high nitriding temperature the COF was almost the same as the untreated one.Compared with the untreated sample,the nitrided samples showed lower wear rates and higher wear resistance under differentnitriding temperatures.The adhesive wear is the main mechanism for untreated CoCrMo alloy and the wear mechanisms ofnitrided ones are the fatigue wear and slight adhesive wear.It is concluded that the improvement of wear resistance is ascribed tothe hard nitride formation of CrN and CrN phases at the nitrided surfaces.
文摘The behavior of gaseous nitriding on the surface nanocrystallized (SNCed) steel was investigated. The mild steel discs were SNCed on one side by using the method of ultrasonic shot peening. The opposite side of the discs maintained the original coarse-grained condition. The gaseous nitriding was subsequently carried out at three different temperatures: 460, 500 and 560℃. The compound layer growth and diffusion behavior were then studied. It was revealed that SNC pretreatment greatly enhances both diffusion coefficient D and surface reaction rate. As a result, nitriding time could be reduced to the half. It was also found that the growth of compound layer with nitriding time conformed with parabolic relationship from the start of nitriding process in the SNCed samples.
文摘Medium-carbon alloy steel was plasma nitrided with rare earths La, Ce and Nd into the nitriding chamber respectively. The nitriding layer microstructures with and without rare earths were compared using optical microscope,normal SEM and high resolution SEM, as well as TEM. It was found that the extent of the influence on plasma nitriding varies with different contents of rare earth. The effect of plasma nitriding is benefit from adding of Ce or Nd. The formation of hard and brittle phase Fe_(2-3)N can be prevented and the butterfly-like structure can be improved by adding Ce or Nd. However, pure La may prevent the diffusion of nitrogen and the formation of iron nitride, and reduce the depth of diffusion layer.
文摘The mixing technology of laser and heated nitrogen was applied to improve the surface hardness of titanium alloy （ TC4 ）. The samples were nitrided with laser power density of 6.S × 10^6SW. cm^-2, the scanning speed varioas from 100 to 500mm ·min^-1. The nitrogen gas was pre-heated to 300℃ to accelerate the nitriding process. Some interested samples were tested with XRD method （X-ray diffraction） to analyze the composition of nitrides, and the surface hardness of HV was measured. The results show that TiN and Ti2N were formed on the surface of Ti alloy with proper nitriding parameters, but TiN is the main composition. The surface hardness increased by three times, which is from the original value of 269to 794kg·mm^-2. The mechanism of the mixing technology is considered mainly of the activation of nitrogen by laser power and the pre-heated process which accelerated the nitriding process. The nitridation process can be considered as six steps given in detail. The result by analyzing the mechanism of improving the surface property of TiAl alloy shows the improvement of surface property due to two factors： the first reason is the result of laser annealing, and the second one is the formation of TiN.
文摘A composite layer was prepared on the surface of Ti-6Al-4V alloy by nitriding-sulfurizing composite treatment,and its microstructure and phase structure were examined by scanning electron microscopy（SEM） and X-ray diffraction（XRD）,respectively.The tribological performance was measured to investigate its dependence on the nitriding-sulfurizing composite treatment process.The results indicated that the composite layer was mainly comprised of Ti2N,TiN,and TiS2.It was found that the composite layer exhibited superior tribological properties under dry friction and absolute sliding conditions due to the formation of sulfides with self-lubricating function.
文摘β-Sialon was produced by carbon thermal nitriding reaction in N_2 gas atmosphere when the mixtures of bauxite and anthracite were put into vertical furnace. According to the mass loss of raw materials and the result of X-ray diffration (XRD) of products, the influences of the process parameters on the compositions and relative contents of products, such as the fixed carbon content, the flow of N2, the soaking time and the temperature, were researched.
文摘Plasma rare earth nitriding of nanocrystallized surface layer of 3J33B steel at 350 and 410℃ for different time was studied. The microstructure observation and X-ray diffraction（XRD） analysis show that the nitriding layer consists of compound layer （γ′-Fe4N） and diffusion layer （α-Fe）. Lanthanum content profiles in nanocrystallized surface layer were measured using glow discharge spectometry（GDS）. The results show that lanthanum can diffuse into the surface layer of the steel to a large depth. Based on the experimental results mentioned above, the diffusion coefficients and activation energy of lanthanum in γ′ phase are calculated to be 1.03×10 -15 cm2/s （350℃）, 1.75×10 -15 cm2/s （410℃） and 31.313kJ/mol, respectively.
基金supported by the National Natural Science Foundation of China(No.50174020).
文摘CW-CO2 laser nitriding technique was applied to improve the properties （such as aging property and the core loss） of grain oriented silicon steel. The samples were nitrided with regular space. Laser power density and scanning speed were chosen as 7.8×10^5W·cm^-2 and 100mm·min^-1. By some laser irradiation, Fe4N and Fe3N were formed in the nitrided zone. The nitrided samples were annealed at the temperatures ranged from 100 to 90℃. The core loss of some interested samples was tested. The results show that the core loss of the nitrided samples with different thickness of 0.23 and 0.30mm decreased by 14.9% and 9.4% respectively, and the aging property were improved up to 800℃. The mechanism of laser nitriding to improve the properties of grain oriented silicon steel is discussed.
基金supported by National Natural Science Foundation of China(Nos.50171054 and 50671085)National High Technical Research and Development Programme of China(No.2007AA03Z521).
文摘A series of experiments were carried out to study the influence of low temperature plasma nitriding on the mechanical properties of AISI 420 martensitic stainless steel. Plasma nitriding experiments were carried out for 15 h at 350℃ by means of DC- pulsed plasma in 25%N2＋ 75%H2 atmosphere. The microstructure, phase composition, and residual stresses profiles of the nitrided layers were determined by optical microscopy and X-ray diffraction. The microhardness profiles of the nitridied surfaces were also studied. The fatigue life, sliding wear, and erosion wear loss of the untreated specimens and plasma nitriding specimens were determined on the basis of a rotating bending fatigue tester, a ball-on-disc wear tester, and a solid particle erosion tester. The results show that the 350℃ nitrided surface is dominated by c-Fe3N and ON, which is supersaturated nitrogen solid solution. They have high hardness and chemical stabilities. So the low temperature plasma nitriding not only increases the surface hardness values but also improves the wear and erosion resistance. In addition, the fatigue limit of AISI 420 steel can also be improved by plasma nitriding at 350℃ because plasma nitriding produces residual compressive stress inside the modified layer.
基金the Scientific and Technological Research Council of Turkey(TUBITAK)for the support of this study(Grant No:215M134)。
文摘This study aims to draw an exact boundary for microstructural and mechanical behaviors in terms of pulsed plasma nitriding conditions.The pulsed plasma nitriding treatment was applied to AISI 304 austenitic stainless steel at different temperatures and durations.Results reveal that nitriding depth increased as process temperature and duration increase.The nitriding depth remarkably increased at 475℃for 8 h and at 550℃for 4 h.An austenite structure was transformed into a metastable nitrogen-oversaturated body-centered tetragonal expanded austenite(S-phase)during low-temperature plasma nitriding.The S-phase was converted to CrN precipitation at 475℃for 8 h and at 550℃for 4 h.Surface hardness and fatigue limit increased through plasma nitriding regardless of process conditions.The best surface hardness and fatigue limit were obtained at 550℃for 4 h because of the occurrence of CrN precipitation.
