Proteins are a class of biomaterials having a vast array of functions, including the catalysis of metabolic reactions, DNA replication, stimuli response and transportation of molecules. Recent progress in laser-based...Proteins are a class of biomaterials having a vast array of functions, including the catalysis of metabolic reactions, DNA replication, stimuli response and transportation of molecules. Recent progress in laser-based fabrication technologies has enabled the formation of three-dimensional （3D） proteinaceous micro- and nano-structures by femtosecond laser cross-linking, which has expanded the possible applications of proteins. This article reviews the current knowledge andrecent advancements in the femtosecond laser cross-linking of proteins. An overview of previous studies related to fabri-cation using a variety of proteins and detailed discussions of the associated mechanisms are provided. In addition, ad-vances and applications utilizing specific protein functions are introduced. This review thus provides a valuable summaryof the 3D micro- and nano-fabrication of proteins for biological and medical applications.展开更多
The femtosecond laser has emerged as a powerful tool for micro-and nanoscale device fabrication. Through nonlinear ionization processes, nanometer-sized material modifications can be inscribed in transparent materials...The femtosecond laser has emerged as a powerful tool for micro-and nanoscale device fabrication. Through nonlinear ionization processes, nanometer-sized material modifications can be inscribed in transparent materials for device fabrication. This paper describes femtosecond precision inscription of nanograting in silica fiber cores to form both distributed and point fiber sensors for sensing applications in extreme environmental conditions. Through the use of scanning electron microscope imaging and laser processing optimization,high-temperature stable, Type II femtosecond laser modifications were continuously inscribed,point by point, with only an insertion loss at 1 d B m~(-1) or 0.001 d B per point sensor device.High-temperature performance of fiber sensors was tested at 1000℃, which showed a temperature fluctuation of ±5.5℃ over 5 days. The low laser-induced insertion loss in optical fibers enabled the fabrication of a 1.4 m, radiation-resilient distributed fiber sensor. The in-pile testing of the distributed fiber sensor further showed that fiber sensors can execute stable and distributed temperature measurements in extreme radiation environments. Overall, this paper demonstrates that femtosecond-laser-fabricated fiber sensors are suitable measurement devices for applications in extreme environments.展开更多
We fabricate the Tm-doped double cladding silica fiber by using the vapor-solution hybrid-doping method, then build up an all-fiber Tin-doped fiber laser which can provide the output power of up to 121 W, correspondin...We fabricate the Tm-doped double cladding silica fiber by using the vapor-solution hybrid-doping method, then build up an all-fiber Tin-doped fiber laser which can provide the output power of up to 121 W, corresponding to a slope efficiency of 51% and an optical-optical efficiency of 48%. By using the domestic Tin-doped fiber, it is the first time a hundred-watt level output at 1915nm has been achieved, to the best of our knowledge. The thermal effect of Tm-doped fiber laser is also analyzed.展开更多
We report the fabrication of 4-inch nano patterned wafer by two-beam laser interference lithography and analyze the uniformity in detail. The profile of the dots array with a period of 800 nm divided into five regions...We report the fabrication of 4-inch nano patterned wafer by two-beam laser interference lithography and analyze the uniformity in detail. The profile of the dots array with a period of 800 nm divided into five regions is characterized by a scanning electron microscope. The average size in each region ranges from 270 nm to 320 nm,and the deviation is almost 4%, which is approaching the applicable value of 3% in the industrial process. We simulate the two-beam laser interference lithography system with MATLAB software and then calculate the distribution of light intensity around the 4 inch area. The experimental data fit very well with the calculated results. Analysis of the experimental data and calculated data indicates that laser beam quality and space filter play important roles in achieving a periodical nanoscale pattern with high uniformity and large area. There is the potential to obtain more practical applications.展开更多
We demonstrate a method of fabricating through micro-holes and micro-hole arrays in silicon using femtosecond laser irradiation and selective chemical etching. The micro-hole formation mechanism is identified as the c...We demonstrate a method of fabricating through micro-holes and micro-hole arrays in silicon using femtosecond laser irradiation and selective chemical etching. The micro-hole formation mechanism is identified as the chemical reaction of the femtosecond laser-induced structure change zone and hydrofluoric acid solution. The morphologies of the through micro-holes and micro-hole arrays are characterized by using scanning electronic microscopy, The effects of the pulse number on the depth and diameter of the holes are investigated. Honeycomb arrays of through micro-holes fabricated at different laser powers and pulse numbers are demonstrated.展开更多
Since the discovery of transition metal dichalcogenide(TMDC)nanoparticles(NPs)with the onion-like structure,many efforts have been made to develop their fabrication methods.Laser fabrication(LF)is one of the most prom...Since the discovery of transition metal dichalcogenide(TMDC)nanoparticles(NPs)with the onion-like structure,many efforts have been made to develop their fabrication methods.Laser fabrication(LF)is one of the most promising methods to prepare onion-structured TMDC(or OS-TMDC)NPs due to its green,flexible,and scalable syntheses.In this mini-review article,we systematically introduce various laser-induced OS-TMDC(especially the OS-MoS_(2))NPs,their formation mechanism,properties,and applications.The preparation routes mainly include laser ablation in liquids and atmospheres,and laser irradiation in liquids.The various formation mechanisms are then introduced based on the different preparation routes,to describe the formations of the corresponding OS-NPs.Finally,some interesting properties and novel applications of these NPs are briefly demonstrated,and a short outlook is also given.This review could help to understand the progress of the laser-induced OS-TMDC NPs and their applications.展开更多
Highly porous nanofoam can be fabricated via multiphoton ablation of a material by raster-scanning femtosecond laser pulses over the material surface. Here, we show the fabrication of nanofoam on the inside surface of...Highly porous nanofoam can be fabricated via multiphoton ablation of a material by raster-scanning femtosecond laser pulses over the material surface. Here, we show the fabrication of nanofoam on the inside surface of a hollow silica capillary that has an inner and outer diameter of 640 and 700 μm respectively. A thin layer of nanofoam was fabricated over ~70% of the inner surface of the capillary. Ray-tracing simulations were used to determine the positional corrections required to account for refraction on the curved surface and also to explain the inability to fabricate nanofoam on the side walls of the capillary.展开更多
A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when...A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when the injection current of the distributed feedback laser is 100mA at 25℃. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.SVpp nonreturn-to-zero pseudorandom modulation signal at -2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained.展开更多
We report on the successful synthesis of cadmium sulfide （CdS） nanocages by laser ablation of bulk Cd target in thioacetamide （TAA） solution. The CdS nanocages exhibit obvious interior hollow spaces and distinctiv...We report on the successful synthesis of cadmium sulfide （CdS） nanocages by laser ablation of bulk Cd target in thioacetamide （TAA） solution. The CdS nanocages exhibit obvious interior hollow spaces and distinctive porous-shell structures. After laser ablation of Cd target in liquid condition, the unique structure should be attributed to the initial forma- tion of Cd micro-gas bubble via a model of micro-explosive boiling model. Surprisingly, the obtained CdS nanocages can provide a super-adsorption of methyl blue （MB） solution. The maximum adsorption capacity reaches up to 11813.3 mg/g, which is much higher than that reported in many previous researches. Without using any complicated stabilizers or soft directing agents, the pure CdS nanocages fabricated by laser ablation will serve as advanced absorbents in further research.展开更多
We report comparatively on fabrication of two-section ridge-waveguide tapered 3 quantum well (QW) InGaAsP/InP (1300 nm) and 5 QW AlGaInAs/InP (1550 nm) diode lasers. Gas mixtures of CCl2F2/O2 and H2/CH4 were used to f...We report comparatively on fabrication of two-section ridge-waveguide tapered 3 quantum well (QW) InGaAsP/InP (1300 nm) and 5 QW AlGaInAs/InP (1550 nm) diode lasers. Gas mixtures of CCl2F2/O2 and H2/CH4 were used to form ridge-waveguide on the lasers with InP-based material structures. As known, chlorine- and hydro-carbon based gases are used to fabricate ridge-waveguide structures. Here, we show the difference between the structures obtained by using the both gas mixtures in which surface and sidewall structures as well as performance of the lasers were analysed using scanning electron microscopy. It is demonstrated that gas mixtures of CCl2F2/O2 highly deteriorated the etched structures although different flow rates, rf powers and base pressures were tried. We also show that the structures etched with H2/CH4 gas mixtures produced much better results that led to the successful fabrication of two-section devices with ridge-waveguide. The lasers fabricated using H2/CH4 were characterized using output power-current (P-I) and spectral results.展开更多
The controllable transfer of droplets on the surface of objects has a wide application prospect in the fields of microfluidic devices,fog collection and so on.The Leidenfrost effect can be utilized to significantly re...The controllable transfer of droplets on the surface of objects has a wide application prospect in the fields of microfluidic devices,fog collection and so on.The Leidenfrost effect can be utilized to significantly reduce motion resistance.However,the use of 3D structures limits the widespread application of self-propulsion based on Leidenfrost droplets in microelectromechanical system.To manipulate Leidenfrost droplets,it is necessary to create 2D or quasi-2D geometries.In this study,femtosecond laser is applied to fabricate a surface with periodic hydrophobicity gradient(SPHG),enabling directional self-propulsion of Leidenfrost droplets.Flow field analysis within the Leidenfrost droplets reveals that the vapor layer between the droplets and the hot surface can be modulated by the SPHG,resulting in directional propulsion of the inner gas.The viscous force between the gas and liquid then drives the droplet to move.展开更多
Ultrafast laser processing technology has offered a wide range of opportunities in micro/nano fabrication and other fields such as nanotechnology,biotechnology,energy science,and photonics due to its controllable proc...Ultrafast laser processing technology has offered a wide range of opportunities in micro/nano fabrication and other fields such as nanotechnology,biotechnology,energy science,and photonics due to its controllable processing precision,diverse processing capabilities,and broad material adaptability.The processing abilities and applications of the ultrafast laser still need more exploration.In the field of material processing,controlling the atomic scale structure in nanomaterials is challenging.Complex effects exist in ultrafast laser surface/interface processing,making it difficult to modulate the nanostructure and properties of the surface/interface as required.In the ultrafast laser fabrication of micro functional devices,the processing ability needs to be improved.Here,we review the research progress of ultrafast laser micro/nano fabrication in the areas of material processing,surface/interface controlling,and micro functional devices fabrication.Several useful ultrafast laser processing methods and applications in these areas are introduced.With various processing effects and abilities,the ultrafast laser processing technology has demonstrated application values in multiple fields from science to industry.展开更多
The growing interest in flexible devices has emerged as a global trend due to their advantages in flexibility,lightweight structure,and wearability,addressing the limitations of traditional devices.While wearable airf...The growing interest in flexible devices has emerged as a global trend due to their advantages in flexibility,lightweight structure,and wearability,addressing the limitations of traditional devices.While wearable airflow sensors have been previously reported,the development of flexible fabric-based airflow sensors capable of functioning in environments with open flames—critical for fire rescue operations—has yet to be explored,largely due to the poor fire resistance of conventional fabrics.In this work,we first present a flexible,wearable,and multifunctional airflow sensor with excellent fire-resistant properties,fabricated through a simple direct laser writing process.This sensor maintains airflow detection capabilities even in the presence of open flames.Typically,the fabrication of fabric-based sensors involves complex procedures such as carbon materials doping or vapor-phase deposition,leading to lengthy preparation cycles and high costs.Furthermore,fabric-based devices are inherently prone to flammability.To address these challenges,we introduce twice-vertical laser-induced graphene(TVLIG)as a sensitive and reliable component for fire-resistant airflow sensors.The resulting TVLIG/Kevlar fabric can be integrated into various garments,particularly protective suits,to form sensitive and fire-resistant airflow sensors capable of detecting airflow velocity and direction in both two-dimensional(2D)and three-dimensional(3D)spaces during fire incidents.Additionally,the TVLIG patterns can be expanded to multifunctional platforms,such as glucose detection for injured individuals,offering further applications in rescue operations.This functional expansion reduces the burden on rescue personnel and streamlines device preparation.With its outstanding sensing capabilities,fire resistance,and expandability,the developed flexible airflow sensor shows great potential for various real-world rescue scenarios,promising advancements in wearable sensing technology for rescue engineering.展开更多
Developing flexible sensors with high working performance holds intense interest for diverse applications in leveraging the Internet-of-things(IoT)infrastructures.For flexible piezoresistive sensors,traditionally most...Developing flexible sensors with high working performance holds intense interest for diverse applications in leveraging the Internet-of-things(IoT)infrastructures.For flexible piezoresistive sensors,traditionally most efforts are focused on tailoring the sensing materials to enhance the contact resistance variation for improving the sensitivity and working range,and it,however,remains challenging to simultaneously achieve flexible sensor with a linear working range over a high-pressure region(>100 kPa)and keep a reliable sensitivity.Herein,we devised a laserengraved silver-coated fabric as"soft"sensor electrode material to markedly advance the flexible sensor's linear working range to a level of 800 kPa with a high sensitivity of 6.4 kPa^-1 yet a fast response time of only 4 ms as well as long-time durability,which was rarely reported before.The integrated sensor successfully routed the wireless signal of pulse rate to the portable smartphone,further demonstrating its potential as a reliable electronic.Along with the rationally building the electrode instead of merely focusing on sensing materials capable of significantly improving the sensor's performance,we expect that this design concept and sensor system could potentially pave the way for developing more advanced wearable electronics in the future.展开更多
We present a novel approach for tailoring the laser induced surface topography upon femtosecond(fs)pulsed laser irradiation.The method employs spatially controlled double fs laser pulses to actively regulate the hydro...We present a novel approach for tailoring the laser induced surface topography upon femtosecond(fs)pulsed laser irradiation.The method employs spatially controlled double fs laser pulses to actively regulate the hydrodynamic microfluidic motion of the melted layer that gives rise to the structures formation.The pulse train used,in particular,consists of a previously unexplored spatiotemporal intensity combination including one pulse with Gaussian and another with periodically modulated intensity distribution created by Direct Laser Interference Patterning(DLIP).The interpulse delay is appropriately chosen to reveal the contribution of the microfluidic melt flow,while it is found that the sequence of the Gaussian and DLIP pulses remarkably influences the surface profile attained.Results also demonstrate that both the spatial intensity of the double pulse and the effective number of pulses per irradiation spot can further be modulated to control the formation of complex surface morphologies.The underlying physical processes behind the complex patterns’generation were interpreted in terms of a multiscale model combining electron excitation with melt hydrodynamics.We believe that this work can constitute a significant step forward towards producing laser induced surface structures on demand by tailoring the melt microfluidic phenomena.展开更多
manufacturing of biomimetic micro/nanostructures due to its specific advantages including high precision,simplicity,and compatibility for diverse materials in comparison with other methods(e.g.ion etching,sol-gel proc...manufacturing of biomimetic micro/nanostructures due to its specific advantages including high precision,simplicity,and compatibility for diverse materials in comparison with other methods(e.g.ion etching,sol-gel process,chemical vapor deposition,template method,and self-assembly).These biomimetic micro/nanostructured surfaces are of significant interest for academic and industrial research due to their wide range of potential applications,including self-cleaning surfaces,oil-water separation,and fog collection.This review presents the inherent relationship between natural organisms,fabrication methods,micro/nanostructures and their potential applications.Thereafter,we throw a list of current fabrication strategies so as to highlight the advantages of FLDW in manufacturing bioinspired microstructured surfaces.Subsequently,we summarize a variety of typical bioinspired designs(e.g.lotus leaf,pitcher plant,rice leaf,butterfly wings,etc)for diverse multifunctional micro/nanostructures through extreme femtosecond laser processing technology.Based on the principle of interfacial chemistry and geometrical optics,we discuss the potential applications of these functional micro/nanostructures and assess the underlying challenges and opportunities in the extreme fabrication of bioinspired micro/nanostructures by FLDW.This review concludes with a follow up and an outlook of femtosecond laser processing in biomimetic domains.展开更多
The details of the special three-dimensional micro-nano scale ripples with a period of hundreds of microns on the surfaces of a Zr-based and a La-based metallic glass irradiated separately by single laser pulse are in...The details of the special three-dimensional micro-nano scale ripples with a period of hundreds of microns on the surfaces of a Zr-based and a La-based metallic glass irradiated separately by single laser pulse are investigated.We use the small-amplitude capillary wave theory to unveil the ripple formation mechanism through considering each of the molten metallic glasses as an incompressible viscous fluid.A generalized model is presented to describe the special morphology,which fits the experimental result well.It is also revealed that the viscosity brings about the biggest effect on the monotone decreasing nature of the amplitude and the wavelength of the surface ripples.The greater the viscosity is,the shorter the amplitude and the wavelength are.展开更多
Laser Powder Bed Fusion (LPBF) is an Additive Manufacturing technique, which allows production of highly complex solid metal parts with good mechanical properties, compared to conventionally manufactured parts. Nevert...Laser Powder Bed Fusion (LPBF) is an Additive Manufacturing technique, which allows production of highly complex solid metal parts with good mechanical properties, compared to conventionally manufactured parts. Nevertheless, the layer-by-layer fabrication process also offers several disadvantages, including a relatively high surface roughness depending on the shape of the component, its position and orientation during the fabrication process. This paper deals with investigations on the surface roughness reduction capability, and residual surface structures by laser polishing of LPBF AlSi10Mg parts under varying initial surface roughness in order to investigate the influence of the surface behavior and initial surface roughness to the achievable surface quality by laser polishing. Hereto test specimens with varying fabrication orientations regarding to the built platform are printed and further polished. Thereby the initial arithmetic roughness varies between 19.2 μm and 8.0 μm. It could be shown that the achievable surface roughness by laser polishing with continuous and pulsed laser radiation is increasing with rising initial roughness, but the relative roughness reduction is almost constant in the range of 95% - 97.5%. The analyzation of the residual roughness structures shows, that the main roughness differences is found in the middle and long structure wavelength regime, which are directly depending on the initial surface structures of 3D printing.展开更多
Different three-dimension （3D） nanotetrapods, containing club-like nanocrystals, nanotetrapods and four-foot-like nanocrystals were synthesized from Zinc sheet via CO2 laser irradiation and coaxially transporting O2...Different three-dimension （3D） nanotetrapods, containing club-like nanocrystals, nanotetrapods and four-foot-like nanocrystals were synthesized from Zinc sheet via CO2 laser irradiation and coaxially transporting O2. Different nanoproducts were fabricated by changing the content of oxygen in the experiment. The morphologies, components, phase structures and optical properties of the products were investigated by a field-emission scanning electron microscopy, an X-ray diffraction, an energy dispersed X-ray spectrometer and a photoluminescence spectroscope. The X-ray diffraction spectra were obtained on a Rigaku D/max 2500PC diffractometer. The experimental results reveal that high quality ZnO nanotetrapods can be fabricated on the special parameters, and growth of ZnO nanotetrapods depends on Vapour-Liquid-Solid（VLS） model, and the content of oxygen in the gas, namely, oxygen partial pressure is one of main factors to control morphologies and optical properties ofZnO nanotetrapods; these advantages above are important for realization of optoelectronic devices.展开更多
文摘Proteins are a class of biomaterials having a vast array of functions, including the catalysis of metabolic reactions, DNA replication, stimuli response and transportation of molecules. Recent progress in laser-based fabrication technologies has enabled the formation of three-dimensional （3D） proteinaceous micro- and nano-structures by femtosecond laser cross-linking, which has expanded the possible applications of proteins. This article reviews the current knowledge andrecent advancements in the femtosecond laser cross-linking of proteins. An overview of previous studies related to fabri-cation using a variety of proteins and detailed discussions of the associated mechanisms are provided. In addition, ad-vances and applications utilizing specific protein functions are introduced. This review thus provides a valuable summaryof the 3D micro- and nano-fabrication of proteins for biological and medical applications.
基金supported in part through Department of Energy Grants DE-NE0008686 and DE-FE00028992the NEET ASI program under DOE Idaho Operations Office Contract DE-AC07-05ID14517。
文摘The femtosecond laser has emerged as a powerful tool for micro-and nanoscale device fabrication. Through nonlinear ionization processes, nanometer-sized material modifications can be inscribed in transparent materials for device fabrication. This paper describes femtosecond precision inscription of nanograting in silica fiber cores to form both distributed and point fiber sensors for sensing applications in extreme environmental conditions. Through the use of scanning electron microscope imaging and laser processing optimization,high-temperature stable, Type II femtosecond laser modifications were continuously inscribed,point by point, with only an insertion loss at 1 d B m~(-1) or 0.001 d B per point sensor device.High-temperature performance of fiber sensors was tested at 1000℃, which showed a temperature fluctuation of ±5.5℃ over 5 days. The low laser-induced insertion loss in optical fibers enabled the fabrication of a 1.4 m, radiation-resilient distributed fiber sensor. The in-pile testing of the distributed fiber sensor further showed that fiber sensors can execute stable and distributed temperature measurements in extreme radiation environments. Overall, this paper demonstrates that femtosecond-laser-fabricated fiber sensors are suitable measurement devices for applications in extreme environments.
基金Supported by the National High-Technology Research and Development Program of China under Grant No 2013AA031501the National Natural Science Foundation of China for Director Fund of WNLO
文摘We fabricate the Tm-doped double cladding silica fiber by using the vapor-solution hybrid-doping method, then build up an all-fiber Tin-doped fiber laser which can provide the output power of up to 121 W, corresponding to a slope efficiency of 51% and an optical-optical efficiency of 48%. By using the domestic Tin-doped fiber, it is the first time a hundred-watt level output at 1915nm has been achieved, to the best of our knowledge. The thermal effect of Tm-doped fiber laser is also analyzed.
基金Supported by the Scientific Equipment Research Program of Chinese Academy of Sciences under Grant No 2014Y4201449
文摘We report the fabrication of 4-inch nano patterned wafer by two-beam laser interference lithography and analyze the uniformity in detail. The profile of the dots array with a period of 800 nm divided into five regions is characterized by a scanning electron microscope. The average size in each region ranges from 270 nm to 320 nm,and the deviation is almost 4%, which is approaching the applicable value of 3% in the industrial process. We simulate the two-beam laser interference lithography system with MATLAB software and then calculate the distribution of light intensity around the 4 inch area. The experimental data fit very well with the calculated results. Analysis of the experimental data and calculated data indicates that laser beam quality and space filter play important roles in achieving a periodical nanoscale pattern with high uniformity and large area. There is the potential to obtain more practical applications.
基金Supported by the National Basic Research Program of China under Grant No 2012CB921804the National Natural Science Foundation of China under Grant Nos 11204236 and 61308006the Collaborative Innovation Center of Suzhou Nano Science and Technology
文摘We demonstrate a method of fabricating through micro-holes and micro-hole arrays in silicon using femtosecond laser irradiation and selective chemical etching. The micro-hole formation mechanism is identified as the chemical reaction of the femtosecond laser-induced structure change zone and hydrofluoric acid solution. The morphologies of the through micro-holes and micro-hole arrays are characterized by using scanning electronic microscopy, The effects of the pulse number on the depth and diameter of the holes are investigated. Honeycomb arrays of through micro-holes fabricated at different laser powers and pulse numbers are demonstrated.
基金the National Key Research and Development Program of China(Grant No.2017YFA0207101)the National Natural Science Foundation of China(Grant Nos.11974352 and 51771182)。
文摘Since the discovery of transition metal dichalcogenide(TMDC)nanoparticles(NPs)with the onion-like structure,many efforts have been made to develop their fabrication methods.Laser fabrication(LF)is one of the most promising methods to prepare onion-structured TMDC(or OS-TMDC)NPs due to its green,flexible,and scalable syntheses.In this mini-review article,we systematically introduce various laser-induced OS-TMDC(especially the OS-MoS_(2))NPs,their formation mechanism,properties,and applications.The preparation routes mainly include laser ablation in liquids and atmospheres,and laser irradiation in liquids.The various formation mechanisms are then introduced based on the different preparation routes,to describe the formations of the corresponding OS-NPs.Finally,some interesting properties and novel applications of these NPs are briefly demonstrated,and a short outlook is also given.This review could help to understand the progress of the laser-induced OS-TMDC NPs and their applications.
文摘Highly porous nanofoam can be fabricated via multiphoton ablation of a material by raster-scanning femtosecond laser pulses over the material surface. Here, we show the fabrication of nanofoam on the inside surface of a hollow silica capillary that has an inner and outer diameter of 640 and 700 μm respectively. A thin layer of nanofoam was fabricated over ~70% of the inner surface of the capillary. Ray-tracing simulations were used to determine the positional corrections required to account for refraction on the curved surface and also to explain the inability to fabricate nanofoam on the side walls of the capillary.
基金Supported by the National High-Technology Research and Development Program of China under Grant Nos 2011AA010303and 2012AA012203the National Basic Research Program of China under Grant No 2011CB301702the National Natural Science Foundation of China under Grant Nos 61321063 and 6132010601
文摘A 32 Gb/s monolithically integrated electroabsorption modulated laser is fabricated by selective area growth technology. The threshold current of the device is below 13mA. The output power exceeds 10mW at 0V bias when the injection current of the distributed feedback laser is 100mA at 25℃. The side mode suppression ratio is over 50 dB. A 32Gb/s eye diagram is measured with a 3.SVpp nonreturn-to-zero pseudorandom modulation signal at -2.3 V bias. A clearly opening eyediagram with a dynamic extinction ratio of 8.01 dB is obtained.
基金supported by the National Natural Science Foundation of China(Grant Nos.11575102 and 11105085)the Fundamental Research Funds of Shandong University,China(Grant No.2015JC007)
文摘We report on the successful synthesis of cadmium sulfide （CdS） nanocages by laser ablation of bulk Cd target in thioacetamide （TAA） solution. The CdS nanocages exhibit obvious interior hollow spaces and distinctive porous-shell structures. After laser ablation of Cd target in liquid condition, the unique structure should be attributed to the initial forma- tion of Cd micro-gas bubble via a model of micro-explosive boiling model. Surprisingly, the obtained CdS nanocages can provide a super-adsorption of methyl blue （MB） solution. The maximum adsorption capacity reaches up to 11813.3 mg/g, which is much higher than that reported in many previous researches. Without using any complicated stabilizers or soft directing agents, the pure CdS nanocages fabricated by laser ablation will serve as advanced absorbents in further research.
基金the financial support of TUB-ITAK via Project 107E163.
文摘We report comparatively on fabrication of two-section ridge-waveguide tapered 3 quantum well (QW) InGaAsP/InP (1300 nm) and 5 QW AlGaInAs/InP (1550 nm) diode lasers. Gas mixtures of CCl2F2/O2 and H2/CH4 were used to form ridge-waveguide on the lasers with InP-based material structures. As known, chlorine- and hydro-carbon based gases are used to fabricate ridge-waveguide structures. Here, we show the difference between the structures obtained by using the both gas mixtures in which surface and sidewall structures as well as performance of the lasers were analysed using scanning electron microscopy. It is demonstrated that gas mixtures of CCl2F2/O2 highly deteriorated the etched structures although different flow rates, rf powers and base pressures were tried. We also show that the structures etched with H2/CH4 gas mixtures produced much better results that led to the successful fabrication of two-section devices with ridge-waveguide. The lasers fabricated using H2/CH4 were characterized using output power-current (P-I) and spectral results.
基金supported by the Beijing Municipal Natural Science Foundation(JQ20015)National Key Research and Development Program of China(No.2022YFB4601300)+3 种基金the National Science Fund for Distinguished Young Scholars(No.52325505)the National Natural Science Foundation of China(NSFC)(No.52075041)the Joint Funds of the National Natural Science Foundation of China(Grant No.U2037205)the Open Project Program of Wuhan National Laboratory for Optoelectronics(No2021WNLOKF016)。
文摘The controllable transfer of droplets on the surface of objects has a wide application prospect in the fields of microfluidic devices,fog collection and so on.The Leidenfrost effect can be utilized to significantly reduce motion resistance.However,the use of 3D structures limits the widespread application of self-propulsion based on Leidenfrost droplets in microelectromechanical system.To manipulate Leidenfrost droplets,it is necessary to create 2D or quasi-2D geometries.In this study,femtosecond laser is applied to fabricate a surface with periodic hydrophobicity gradient(SPHG),enabling directional self-propulsion of Leidenfrost droplets.Flow field analysis within the Leidenfrost droplets reveals that the vapor layer between the droplets and the hot surface can be modulated by the SPHG,resulting in directional propulsion of the inner gas.The viscous force between the gas and liquid then drives the droplet to move.
基金supported by the National Natural Science Foundation of China(No.52075289)the Tsinghua-Jiangyin Innovation Special Fund(TJISF,No.2023JYTH0104).
文摘Ultrafast laser processing technology has offered a wide range of opportunities in micro/nano fabrication and other fields such as nanotechnology,biotechnology,energy science,and photonics due to its controllable processing precision,diverse processing capabilities,and broad material adaptability.The processing abilities and applications of the ultrafast laser still need more exploration.In the field of material processing,controlling the atomic scale structure in nanomaterials is challenging.Complex effects exist in ultrafast laser surface/interface processing,making it difficult to modulate the nanostructure and properties of the surface/interface as required.In the ultrafast laser fabrication of micro functional devices,the processing ability needs to be improved.Here,we review the research progress of ultrafast laser micro/nano fabrication in the areas of material processing,surface/interface controlling,and micro functional devices fabrication.Several useful ultrafast laser processing methods and applications in these areas are introduced.With various processing effects and abilities,the ultrafast laser processing technology has demonstrated application values in multiple fields from science to industry.
基金supported by the National Natural Science Foundation of China(Nos.62205157 and 82302847)China Postdoctoral Science Foundation(No.2023M731777)+1 种基金the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications(No.NY222010)Funding Matching Project for the National Natural Science Foundation of China of Nanjing University of Chinese Medicine(No.XPT82302847).
文摘The growing interest in flexible devices has emerged as a global trend due to their advantages in flexibility,lightweight structure,and wearability,addressing the limitations of traditional devices.While wearable airflow sensors have been previously reported,the development of flexible fabric-based airflow sensors capable of functioning in environments with open flames—critical for fire rescue operations—has yet to be explored,largely due to the poor fire resistance of conventional fabrics.In this work,we first present a flexible,wearable,and multifunctional airflow sensor with excellent fire-resistant properties,fabricated through a simple direct laser writing process.This sensor maintains airflow detection capabilities even in the presence of open flames.Typically,the fabrication of fabric-based sensors involves complex procedures such as carbon materials doping or vapor-phase deposition,leading to lengthy preparation cycles and high costs.Furthermore,fabric-based devices are inherently prone to flammability.To address these challenges,we introduce twice-vertical laser-induced graphene(TVLIG)as a sensitive and reliable component for fire-resistant airflow sensors.The resulting TVLIG/Kevlar fabric can be integrated into various garments,particularly protective suits,to form sensitive and fire-resistant airflow sensors capable of detecting airflow velocity and direction in both two-dimensional(2D)and three-dimensional(3D)spaces during fire incidents.Additionally,the TVLIG patterns can be expanded to multifunctional platforms,such as glucose detection for injured individuals,offering further applications in rescue operations.This functional expansion reduces the burden on rescue personnel and streamlines device preparation.With its outstanding sensing capabilities,fire resistance,and expandability,the developed flexible airflow sensor shows great potential for various real-world rescue scenarios,promising advancements in wearable sensing technology for rescue engineering.
基金the financial support of the project from the National Natural Science Foundation of China(No.61904141)the funding of Natural Science Foundation of Shaanxi Province(No.2020JQ-295)+3 种基金the Key Research and Development Program of Shaanxi(Program No.2020GY-252)National Key Laboratory of Science and Technology on Vacuum Technology and Physics(HTKJ2019KL510007)City University of Hong Kong(Project Nos.7005070 and 9667153)Shenzhen Science and Technology Innovation Committee under the Grant JCYJ20170818103206501。
文摘Developing flexible sensors with high working performance holds intense interest for diverse applications in leveraging the Internet-of-things(IoT)infrastructures.For flexible piezoresistive sensors,traditionally most efforts are focused on tailoring the sensing materials to enhance the contact resistance variation for improving the sensitivity and working range,and it,however,remains challenging to simultaneously achieve flexible sensor with a linear working range over a high-pressure region(>100 kPa)and keep a reliable sensitivity.Herein,we devised a laserengraved silver-coated fabric as"soft"sensor electrode material to markedly advance the flexible sensor's linear working range to a level of 800 kPa with a high sensitivity of 6.4 kPa^-1 yet a fast response time of only 4 ms as well as long-time durability,which was rarely reported before.The integrated sensor successfully routed the wireless signal of pulse rate to the portable smartphone,further demonstrating its potential as a reliable electronic.Along with the rationally building the electrode instead of merely focusing on sensing materials capable of significantly improving the sensor's performance,we expect that this design concept and sensor system could potentially pave the way for developing more advanced wearable electronics in the future.
基金support by the European Union’s Horizon 2020 research and innovation program through the project BioCombs4Nanofibres(Grant Agreement No.862016)。
文摘We present a novel approach for tailoring the laser induced surface topography upon femtosecond(fs)pulsed laser irradiation.The method employs spatially controlled double fs laser pulses to actively regulate the hydrodynamic microfluidic motion of the melted layer that gives rise to the structures formation.The pulse train used,in particular,consists of a previously unexplored spatiotemporal intensity combination including one pulse with Gaussian and another with periodically modulated intensity distribution created by Direct Laser Interference Patterning(DLIP).The interpulse delay is appropriately chosen to reveal the contribution of the microfluidic melt flow,while it is found that the sequence of the Gaussian and DLIP pulses remarkably influences the surface profile attained.Results also demonstrate that both the spatial intensity of the double pulse and the effective number of pulses per irradiation spot can further be modulated to control the formation of complex surface morphologies.The underlying physical processes behind the complex patterns’generation were interpreted in terms of a multiscale model combining electron excitation with melt hydrodynamics.We believe that this work can constitute a significant step forward towards producing laser induced surface structures on demand by tailoring the melt microfluidic phenomena.
基金The present work was supported by the National Natural Science Foundation of China(51805508)the Key Project of Equipment Pre-Research Field Fund of China(61409230310)and the Fundamental Research Funds for the Central Universities(WK2090090025).
文摘manufacturing of biomimetic micro/nanostructures due to its specific advantages including high precision,simplicity,and compatibility for diverse materials in comparison with other methods(e.g.ion etching,sol-gel process,chemical vapor deposition,template method,and self-assembly).These biomimetic micro/nanostructured surfaces are of significant interest for academic and industrial research due to their wide range of potential applications,including self-cleaning surfaces,oil-water separation,and fog collection.This review presents the inherent relationship between natural organisms,fabrication methods,micro/nanostructures and their potential applications.Thereafter,we throw a list of current fabrication strategies so as to highlight the advantages of FLDW in manufacturing bioinspired microstructured surfaces.Subsequently,we summarize a variety of typical bioinspired designs(e.g.lotus leaf,pitcher plant,rice leaf,butterfly wings,etc)for diverse multifunctional micro/nanostructures through extreme femtosecond laser processing technology.Based on the principle of interfacial chemistry and geometrical optics,we discuss the potential applications of these functional micro/nanostructures and assess the underlying challenges and opportunities in the extreme fabrication of bioinspired micro/nanostructures by FLDW.This review concludes with a follow up and an outlook of femtosecond laser processing in biomimetic domains.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.10572002,10732010,and 11332002)
文摘The details of the special three-dimensional micro-nano scale ripples with a period of hundreds of microns on the surfaces of a Zr-based and a La-based metallic glass irradiated separately by single laser pulse are investigated.We use the small-amplitude capillary wave theory to unveil the ripple formation mechanism through considering each of the molten metallic glasses as an incompressible viscous fluid.A generalized model is presented to describe the special morphology,which fits the experimental result well.It is also revealed that the viscosity brings about the biggest effect on the monotone decreasing nature of the amplitude and the wavelength of the surface ripples.The greater the viscosity is,the shorter the amplitude and the wavelength are.
文摘Laser Powder Bed Fusion (LPBF) is an Additive Manufacturing technique, which allows production of highly complex solid metal parts with good mechanical properties, compared to conventionally manufactured parts. Nevertheless, the layer-by-layer fabrication process also offers several disadvantages, including a relatively high surface roughness depending on the shape of the component, its position and orientation during the fabrication process. This paper deals with investigations on the surface roughness reduction capability, and residual surface structures by laser polishing of LPBF AlSi10Mg parts under varying initial surface roughness in order to investigate the influence of the surface behavior and initial surface roughness to the achievable surface quality by laser polishing. Hereto test specimens with varying fabrication orientations regarding to the built platform are printed and further polished. Thereby the initial arithmetic roughness varies between 19.2 μm and 8.0 μm. It could be shown that the achievable surface roughness by laser polishing with continuous and pulsed laser radiation is increasing with rising initial roughness, but the relative roughness reduction is almost constant in the range of 95% - 97.5%. The analyzation of the residual roughness structures shows, that the main roughness differences is found in the middle and long structure wavelength regime, which are directly depending on the initial surface structures of 3D printing.
基金Funded by the Open Foundation of Jiangsu Provincial Key Laboratory of Photon-manufacture (GZ200708)the 7th Student Research Train Programof Jiangsu University (No. 07A172)
文摘Different three-dimension （3D） nanotetrapods, containing club-like nanocrystals, nanotetrapods and four-foot-like nanocrystals were synthesized from Zinc sheet via CO2 laser irradiation and coaxially transporting O2. Different nanoproducts were fabricated by changing the content of oxygen in the experiment. The morphologies, components, phase structures and optical properties of the products were investigated by a field-emission scanning electron microscopy, an X-ray diffraction, an energy dispersed X-ray spectrometer and a photoluminescence spectroscope. The X-ray diffraction spectra were obtained on a Rigaku D/max 2500PC diffractometer. The experimental results reveal that high quality ZnO nanotetrapods can be fabricated on the special parameters, and growth of ZnO nanotetrapods depends on Vapour-Liquid-Solid（VLS） model, and the content of oxygen in the gas, namely, oxygen partial pressure is one of main factors to control morphologies and optical properties ofZnO nanotetrapods; these advantages above are important for realization of optoelectronic devices.
