Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate compon...Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components,which is not applicable in some conditions.Aiming at solving the problem of CNC lathes reliability allocating,a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis（FMEA）is presented.Firstly,conventional reliability allocation methods are introduced.Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated.Subsequently,a cubic transformed function is established in order to overcome these limitations.Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence.Designers can choose appropriate transform amplitudes according to their requirements.Finally,a CNC lathe and a spindle system are used as an example to verify the new allocation method.Seven criteria are considered to compare the results of the new method with traditional methods.The allocation results indicate that the new method is more flexible than traditional methods.By employing the new cubic transformed function,the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.展开更多
Functional failure mode of commercial deep sub-micron static random access memory（SRAM） induced by total dose irradiation is experimentally analyzed and verified by circuit simulation. We extensively characterize th...Functional failure mode of commercial deep sub-micron static random access memory（SRAM） induced by total dose irradiation is experimentally analyzed and verified by circuit simulation. We extensively characterize the functional failure mode of the device by testing its electrical parameters and function with test patterns covering different functional failure modes. Experimental results reveal that the functional failure mode of the device is a temporary function interruption caused by peripheral circuits being sensitive to the standby current rising. By including radiation-induced threshold shift and off-state leakage current in memory cell transistors, we simulate the influence of radiation on the functionality of the memory cell. Simulation results reveal that the memory cell is tolerant to irradiation due to its high stability, which agrees with our experimental result.展开更多
Three density functional theory methods (DFT) have been used to investigate the H2+F?HF+H reaction comparing with the Hartree-Fock method and Moller-Plesset (MP2) perturbation theory method. Through the analysis of t...Three density functional theory methods (DFT) have been used to investigate the H2+F?HF+H reaction comparing with the Hartree-Fock method and Moller-Plesset (MP2) perturbation theory method. Through the analysis of the vibrational mode and vibrational frequency in the reaction process, the reaction mechanism has been discussed. The activation energy, the reorganization energy and rate constant of the ET reaction are calculated at semi-quantitative level.展开更多
We explore the theoretical possibility of extending the usual squeezed state to those produced by nonlinear singlemode squeezing operators. We derive the wave functions of exp[-（ig/2）（（1-X2）1/2P ＋ P（1-X2）1/2）...We explore the theoretical possibility of extending the usual squeezed state to those produced by nonlinear singlemode squeezing operators. We derive the wave functions of exp[-（ig/2）（（1-X2）1/2P ＋ P（1-X2）1/2）]｜0 in the coordinate representation. A new operator＇s disentangling formula is derived as a by-product.展开更多
The robust stability and robust sliding mode control problems are studied for a class of linear distributed time-delay systems with polytopic-type uncertainties by applying the parameter-dependent Lyapunov functional ...The robust stability and robust sliding mode control problems are studied for a class of linear distributed time-delay systems with polytopic-type uncertainties by applying the parameter-dependent Lyapunov functional approach combining with a new method of introducing some relaxation matrices and tuning parameters, which can be chosen properly to lead to a less conservative result. First, a sufficient condition is proposed for robust stability of the autonomic system; next, the sufficient conditions of the robust stabilization controller and the existence condition of sliding mode are developed. The results are given in terms of linear matrix inequalities （LMIs）, which can be solved via efficient interior-point algorithms. A numerical example is presented to illustrate the feasibility and advantages of the proposed design scheme.展开更多
We propose a scheme for the direct measurement of Wigner function in two-mode cavity QED. The atoms are sent to resonantly interact with two orthogonally polarized cavity modes in the presence of strong classical fiel...We propose a scheme for the direct measurement of Wigner function in two-mode cavity QED. The atoms are sent to resonantly interact with two orthogonally polarized cavity modes in the presence of strong classical field. The probability of measuring the atom in the ground state directly gives the useful information of the cavity field. This method can be used for quantum non-demolition measurement of the photon number.展开更多
Based on the brief account of the connotation of transforming economic development pattern and government functions,the thesis will introduce the development status of agricultural economy in Guizhou Province:firstly,...Based on the brief account of the connotation of transforming economic development pattern and government functions,the thesis will introduce the development status of agricultural economy in Guizhou Province:firstly,single agricultural industrial structure;secondly,large gap between urban and rural development;thirdly,low-level utilization of agricultural science and technology;fourthly,fierce contradiction between agricultural mode of production and ecological environment.Then it analyzes the basic requirements for government functions in transforming the development pattern of agricultural economy in Guizhou Province:the first one is the function to guide sustainable development and the structural adjustment of agricultural production;the second is the function to coordinate urban-rural development and equally supply basic public goods;the third is the function to input science and technology to serve agriculture;the fourth one is the dominant function to promote the harmonious development of man and nature as well as to reduce the number of peasants.In order to promote the transformation of agricultural development mode and maintain the sound and rapid economic development,some corresponding measures and suggestions are proposed from the perspective of government functions:firstly,promoting the optimization and upgrading of industrial structure;secondly,the government should take the lead in providing rural public goods;thirdly,strengthening the skills training and technological education of rural labor force;fourthly,reducing the number of farmers and retaining the farmers.展开更多
The crystal structure of L-glutamine is stabilized by a three-dimensional network of intermolecular hydrogen bonds.We utilize plane-wave density functional theory lattice-dynamics calculations within the generalized-g...The crystal structure of L-glutamine is stabilized by a three-dimensional network of intermolecular hydrogen bonds.We utilize plane-wave density functional theory lattice-dynamics calculations within the generalized-gradient approximation（GGA）, Perdew–Burke–Ernzerhof（PBE）, PBE for solids（PBEsol）, PBE with Wu–Cohen exchange（WC）, and dispersion-corrected PBE, to investigate the effect of these intermolecular contacts on the absorption spectra of glutamine in the terahertz frequency range. Among these calculations, the solid-state simulated results obtained using the WC method exhibit a good agreement with the measured absorption spectra, and the absorption features are assigned with the help of WC. This indicates that the vibrational modes of glutamine were related to the combination of intramolecular and intermolecular motions, the intramolecular modes were dominated by rocking or torsion involving functional groups; the intermolecular modes mainly result from the translational motions of individual molecules, and the rocking of the hydrogenbonded functional groups.展开更多
This paper investigates the two-time intensity correlation function of a two-mode ring laser system subjected to both pump and quantum noises by stochastic simulation. It finds that the decay rate of the intensity cor...This paper investigates the two-time intensity correlation function of a two-mode ring laser system subjected to both pump and quantum noises by stochastic simulation. It finds that the decay rate of the intensity correlation function of one mode gets faster with decreasing values of relevant parameters, i.e., the coupling constant ξ, the cross-correlation coefficient A, the difference of the pump parameters Aa and the pump parameter al; however, its variations get complex in the other mode when relevant parameters are changed. The investigating results also show that the effects of the mode competition on intensity correlation function are obvious.展开更多
The frequency–space（f–x） empirical mode decomposition（EMD） denoising method has two limitations when applied to nonstationary seismic data. First, subtracting the first intrinsic mode function（IMF） results in ...The frequency–space（f–x） empirical mode decomposition（EMD） denoising method has two limitations when applied to nonstationary seismic data. First, subtracting the first intrinsic mode function（IMF） results in signal damage and limited denoising. Second, decomposing the real and imaginary parts of complex data may lead to inconsistent decomposition numbers. Thus, we propose a new method named f–x spatial projection-based complex empirical mode decomposition（CEMD） prediction filtering. The proposed approach directly decomposes complex seismic data into a series of complex IMFs（CIMFs） using the spatial projection-based CEMD algorithm and then applies f–x predictive filtering to the stationary CIMFs to improve the signal-to-noise ratio. Synthetic and real data examples were used to demonstrate the performance of the new method in random noise attenuation and seismic signal preservation.展开更多
基金Supported by National Natural Science Foundation of China(Grant Nos.51135003,51205050,U1234208)Key National Science & Technology Special Project on"High-Grade CNC Machine Tools and Basic Manufacturing Equipments"(Grant No.2013ZX04011011)+1 种基金Research Fund for the Doctoral Program of Higher Education of China(Grant No.20110042120020)Fundamental Research Funds for the Central
文摘Reliability allocation of computerized numerical controlled（CNC）lathes is very important in industry.Traditional allocation methods only focus on high-failure rate components rather than moderate failure rate components,which is not applicable in some conditions.Aiming at solving the problem of CNC lathes reliability allocating,a comprehensive reliability allocation method based on cubic transformed functions of failure modes and effects analysis（FMEA）is presented.Firstly,conventional reliability allocation methods are introduced.Then the limitations of direct combination of comprehensive allocation method with the exponential transformed FMEA method are investigated.Subsequently,a cubic transformed function is established in order to overcome these limitations.Properties of the new transformed functions are discussed by considering the failure severity and the failure occurrence.Designers can choose appropriate transform amplitudes according to their requirements.Finally,a CNC lathe and a spindle system are used as an example to verify the new allocation method.Seven criteria are considered to compare the results of the new method with traditional methods.The allocation results indicate that the new method is more flexible than traditional methods.By employing the new cubic transformed function,the method covers a wider range of problems in CNC reliability allocation without losing the advantages of traditional methods.
文摘Functional failure mode of commercial deep sub-micron static random access memory（SRAM） induced by total dose irradiation is experimentally analyzed and verified by circuit simulation. We extensively characterize the functional failure mode of the device by testing its electrical parameters and function with test patterns covering different functional failure modes. Experimental results reveal that the functional failure mode of the device is a temporary function interruption caused by peripheral circuits being sensitive to the standby current rising. By including radiation-induced threshold shift and off-state leakage current in memory cell transistors, we simulate the influence of radiation on the functionality of the memory cell. Simulation results reveal that the memory cell is tolerant to irradiation due to its high stability, which agrees with our experimental result.
文摘Three density functional theory methods (DFT) have been used to investigate the H2+F?HF+H reaction comparing with the Hartree-Fock method and Moller-Plesset (MP2) perturbation theory method. Through the analysis of the vibrational mode and vibrational frequency in the reaction process, the reaction mechanism has been discussed. The activation energy, the reorganization energy and rate constant of the ET reaction are calculated at semi-quantitative level.
基金Project supported by the National Natural Science Foundation of China(Grant No.11175113)
文摘We explore the theoretical possibility of extending the usual squeezed state to those produced by nonlinear singlemode squeezing operators. We derive the wave functions of exp[-（ig/2）（（1-X2）1/2P ＋ P（1-X2）1/2）]｜0 in the coordinate representation. A new operator＇s disentangling formula is derived as a by-product.
基金This work was partially supported by the National Natural Science Foundation of China(No.60504008).
文摘The robust stability and robust sliding mode control problems are studied for a class of linear distributed time-delay systems with polytopic-type uncertainties by applying the parameter-dependent Lyapunov functional approach combining with a new method of introducing some relaxation matrices and tuning parameters, which can be chosen properly to lead to a less conservative result. First, a sufficient condition is proposed for robust stability of the autonomic system; next, the sufficient conditions of the robust stabilization controller and the existence condition of sliding mode are developed. The results are given in terms of linear matrix inequalities （LMIs）, which can be solved via efficient interior-point algorithms. A numerical example is presented to illustrate the feasibility and advantages of the proposed design scheme.
基金Project supported by the National Natural Science Foundation of China(Grant No.10974028)the Doctoral Foundation of the Ministry of Education of China(Grant No.20093514110009)+1 种基金the Natural Science Foundation of Fujian Province of China(Grant No.2009J06002)the Funds from the State Key Laboratory Breeding Base of Photocatalysis,Fuzhou University
文摘We propose a scheme for the direct measurement of Wigner function in two-mode cavity QED. The atoms are sent to resonantly interact with two orthogonally polarized cavity modes in the presence of strong classical field. The probability of measuring the atom in the ground state directly gives the useful information of the cavity field. This method can be used for quantum non-demolition measurement of the photon number.
基金Supported by Guizhou Provincial Education Department(08ZX024)
文摘Based on the brief account of the connotation of transforming economic development pattern and government functions,the thesis will introduce the development status of agricultural economy in Guizhou Province:firstly,single agricultural industrial structure;secondly,large gap between urban and rural development;thirdly,low-level utilization of agricultural science and technology;fourthly,fierce contradiction between agricultural mode of production and ecological environment.Then it analyzes the basic requirements for government functions in transforming the development pattern of agricultural economy in Guizhou Province:the first one is the function to guide sustainable development and the structural adjustment of agricultural production;the second is the function to coordinate urban-rural development and equally supply basic public goods;the third is the function to input science and technology to serve agriculture;the fourth one is the dominant function to promote the harmonious development of man and nature as well as to reduce the number of peasants.In order to promote the transformation of agricultural development mode and maintain the sound and rapid economic development,some corresponding measures and suggestions are proposed from the perspective of government functions:firstly,promoting the optimization and upgrading of industrial structure;secondly,the government should take the lead in providing rural public goods;thirdly,strengthening the skills training and technological education of rural labor force;fourthly,reducing the number of farmers and retaining the farmers.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61302007 and 60977065)the Fundamental Research Funds for the Central Universities of China(Grant No.FRF-SD-12-016A)the Engineering Research Center of Industrial Spectrum Imaging of Beijing,China
文摘The crystal structure of L-glutamine is stabilized by a three-dimensional network of intermolecular hydrogen bonds.We utilize plane-wave density functional theory lattice-dynamics calculations within the generalized-gradient approximation（GGA）, Perdew–Burke–Ernzerhof（PBE）, PBE for solids（PBEsol）, PBE with Wu–Cohen exchange（WC）, and dispersion-corrected PBE, to investigate the effect of these intermolecular contacts on the absorption spectra of glutamine in the terahertz frequency range. Among these calculations, the solid-state simulated results obtained using the WC method exhibit a good agreement with the measured absorption spectra, and the absorption features are assigned with the help of WC. This indicates that the vibrational modes of glutamine were related to the combination of intramolecular and intermolecular motions, the intramolecular modes were dominated by rocking or torsion involving functional groups; the intermolecular modes mainly result from the translational motions of individual molecules, and the rocking of the hydrogenbonded functional groups.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10865006)the Natural Science Foundation of Yunnan Province of China (Grant No. 2005A0002M)
文摘This paper investigates the two-time intensity correlation function of a two-mode ring laser system subjected to both pump and quantum noises by stochastic simulation. It finds that the decay rate of the intensity correlation function of one mode gets faster with decreasing values of relevant parameters, i.e., the coupling constant ξ, the cross-correlation coefficient A, the difference of the pump parameters Aa and the pump parameter al; however, its variations get complex in the other mode when relevant parameters are changed. The investigating results also show that the effects of the mode competition on intensity correlation function are obvious.
基金supported financially by the National Natural Science Foundation(No.41174117)the Major National Science and Technology Projects(No.2011ZX05031–001)
文摘The frequency–space（f–x） empirical mode decomposition（EMD） denoising method has two limitations when applied to nonstationary seismic data. First, subtracting the first intrinsic mode function（IMF） results in signal damage and limited denoising. Second, decomposing the real and imaginary parts of complex data may lead to inconsistent decomposition numbers. Thus, we propose a new method named f–x spatial projection-based complex empirical mode decomposition（CEMD） prediction filtering. The proposed approach directly decomposes complex seismic data into a series of complex IMFs（CIMFs） using the spatial projection-based CEMD algorithm and then applies f–x predictive filtering to the stationary CIMFs to improve the signal-to-noise ratio. Synthetic and real data examples were used to demonstrate the performance of the new method in random noise attenuation and seismic signal preservation.
