Profile shift is a highly effective technique for optimizing the performance of spur gear transmission systems.However,tooth surface wear is inevitable during gear meshing due to inadequate lubrication and long-term o...Profile shift is a highly effective technique for optimizing the performance of spur gear transmission systems.However,tooth surface wear is inevitable during gear meshing due to inadequate lubrication and long-term operation.Both profile shift and tooth surface wear(TSW)can impact the meshing characteristics by altering the involute tooth profile.In this study,a tooth stiffness model of spur gears that incorporates profile shift,TSW,tooth deformation,tooth contact deformation,fillet-foundation deformation,and gear body structure coupling is established.This model efficiently and accurately determines the time-varying mesh stiffness(TVMS).Additionally,an improved wear depth prediction method for spur gears is developed,which takes into consideration the mutually prime teeth numbers and more accurately reflects actual gear meshing conditions.Results show that consideration of the mutual prime of teeth numbers will have a certain impact on the TSW process.Furthermore,the finite element method(FEM)is employed to accurately verify the values of TVMS and load sharing ratio(LSR)of profile-shifted gears and worn gears.This study quantitatively analyzes the effect of profile shift on the surface wear process,which suggests that gear profile shift can partially alleviate the negative effects of TSW.The contribution of this study provides valuable insights into the design and maintenance of spur gear systems.展开更多
A new method named orthogonal two-way link-shift here has been proposed.Based on the method and a standard involute gear hob, a specific gear tooth profile (including anarbitrary gear tooth profile and a modified invo...A new method named orthogonal two-way link-shift here has been proposed.Based on the method and a standard involute gear hob, a specific gear tooth profile (including anarbitrary gear tooth profile and a modified involute gear tooth profile) can be generated on aCNC(computer numerical control) bobbing machine. Computer simulation has been carried out, and theresults prove that the method is right and practicable. So, the fabrication costs can be greatlydecreased than before. The new method has momentous significance to realize gear's optimizedmodification under different work conditions.展开更多
A dynamic model of a helical gear rotor system is proposed.Firstly,a generally distributed dynamic model of a helical gear pair with tooth profile errors is developed.The gear mesh is represented by a pair of cylinder...A dynamic model of a helical gear rotor system is proposed.Firstly,a generally distributed dynamic model of a helical gear pair with tooth profile errors is developed.The gear mesh is represented by a pair of cylinders connected by a series of springs and the stiffness of each spring is equal to the effective mesh stiffness.Combining the gear dynamic model with the rotor-bearing system model,the gear-rotor-bearing dynamic model is developed.Then three cases are presented to analyze the dynamic responses of gear systems.The results reveal that the gear dynamic model is effective and advanced for general gear systems,narrow-faced gear,wide-faced gear and gear with tooth profile errors.Finally,the responses of an example helical gear system are also studied to demonstrate the influence of the lead crown reliefs and misalignments.The results show that both of the lead crown relief and misalignment soften the gear mesh stiffness and the responses of the gear system increase with the increasing lead crown reliefs and misalignments.展开更多
In order to analyze the influence of setting error of tool on both tooth profile and contact characteristic of orthogonal face gear drive,the coordinate systems with and without setting error are established.Moreover,...In order to analyze the influence of setting error of tool on both tooth profile and contact characteristic of orthogonal face gear drive,the coordinate systems with and without setting error are established.Moreover,the equations of tooth profile and contact points of face gear drive are derived by envelope principle.According to the equations,the change of tooth profile and the contact points position on face gear are analyzed.The tooth surface and contact points are obtained by numerical simulation.Results show that the tooth profile and contact characteristic of face gear drive are not sensitive to the setting error of tool.展开更多
Based on Newton ' s second law,the bend-torsion-shaft coupling nonlinear dynamic model and equations of power split gear transmission system are established.According to the principle of tooth profile modification...Based on Newton ' s second law,the bend-torsion-shaft coupling nonlinear dynamic model and equations of power split gear transmission system are established.According to the principle of tooth profile modification,the tooth profile modification is considered as time-varying gear backlash function acting along the line of action.Then the dynamic functions are solved by using Runge-Kutta numerical method.After analyzing the effect of tooth profile modification quantity( TPMQ) and relative tooth profile modification length( TPML) to the nonlinear dynamic characteristics of power split gear transmission,the following conclusions are drawn:1 The TPMQ of a certain stage transmission affects the vibration of its own stage more significantly than the other stage,and the coupling effect between two stages can be ignored usually in the modification design;2 If the first stage TPMLs are less than 0.3,the influence of the first stage TPMLs to the first stage transmission vibration is much more greatly than the influence of the second stage TPMLs to the first stage transmission vibration,or else both the first and second stage TPMLs affect the first stage transmission vibration largely.The same is true for the second stage TPMLs,and the cutoff value is 0.2;3 The TPMQ affects the vibration of power split gear transmission system more principally than the TPML,and should be top-priority in the modification design.展开更多
A small hole of 0.9mm in diameter is drilled at the theoretical contact point of the convex tooth flank of the measured gear, and the hole leads throughout to the non-working flank. A stylus glued to the core of trans...A small hole of 0.9mm in diameter is drilled at the theoretical contact point of the convex tooth flank of the measured gear, and the hole leads throughout to the non-working flank. A stylus glued to the core of transformer is put into the hole, and the stylus can freely contact with the meshed concave tooth flank. The transformer is installed on the body of gear to be measured. Rotate the positioning worm slowly after loading, and locate the contact point at the hole of convex tooth flank, the displacement value measured is considered as the deformation of convex tooth. The deformations at the middle and the two ends of tooth breadth for the helical gears with double-circular-cra tooth profile whose modules are 3mm and 4mm respectively are measured in the paper.展开更多
An active design method of tooth profiles for cycloid gears based on their meshing efficiency is proposed.This method takes the meshing efficiency as one of the design variables to determine the tooth profiles.The cal...An active design method of tooth profiles for cycloid gears based on their meshing efficiency is proposed.This method takes the meshing efficiency as one of the design variables to determine the tooth profiles.The calculation method for the meshing efficiency of planetary transmission is analyzed and the equation of the meshing efficiency is deduced.Relationships between the meshing efficiency,the radius of the pin wheel and the eccentric distance are revealed.The design constraint quations and the strength constraint quations are deduced.On the basis of this,a design procedure is laid out.Some examples using different input parameters are conducted to demonstrate the feasibility of the approach.A dynamic simulation of the rigid flexible coupling of cycloid gears is also presented.The results show that the proposed design method is more flexible to control the tooth profiles by changing the input values of the transmission efficiency.展开更多
The transmission characteristics of gear drive can be improved with the use of novel tooth profiles.A theoretical study on tooth profile of the hypocycloid pinwheel transmission and contact analysis of gear pair based...The transmission characteristics of gear drive can be improved with the use of novel tooth profiles.A theoretical study on tooth profile of the hypocycloid pinwheel transmission and contact analysis of gear pair based on finite element method(FEM) are carried out,respectively.The line contact between mated tooth surfaces becomes point contact according to a plus movement.Through loaded tooth contact analysis(LTCA),the contact stress and load distributions for the proposed hypocycloid pinwheel transmission and the traditional one are discussed.The analysis results show that the developed tooth surfaces have anticipatory point contact characteristics under loads and contact fatigue dangerous area locates around the ultimate contact position.展开更多
A mathematical model of gear tooth profiles using the ellipse curve, whose curvature is convenient to control by changing the mathematical parameters as its line of action, was built based on the meshing theory. The e...A mathematical model of gear tooth profiles using the ellipse curve, whose curvature is convenient to control by changing the mathematical parameters as its line of action, was built based on the meshing theory. The equation of undercutting condition was derived from the model. A special epicycloidal tooth profile was also presented. An example gear drive with variation of the ellipse parameters was taken to illustrate the proposed method. The contact ratio of the gear drive designed by the proposed method was analyzed. A comparison of the property of the gear drive designed with the involute gear drive was also carried out. The results confirm that the proposed gear drive has higher contact ratio in comparison with the involute gear drive.展开更多
Distinguishing with traditional tooth profile of spiral bevel and hypoid gear, it proposed a new tooth profile namely the spherical involute. Firstly, a new theory of forming the spherical involute tooth profile was p...Distinguishing with traditional tooth profile of spiral bevel and hypoid gear, it proposed a new tooth profile namely the spherical involute. Firstly, a new theory of forming the spherical involute tooth profile was proposed. Then, this theory was applied to complete parametric derivation of each part of its tooth profile. For enhancing the precision, the SWEEP method used for formation of each part of tooth surface and G1 stitching schema for obtaining a unified tooth surface are put forward and made the application in the accurate modeling. Lastly, owing to the higher accuracy of tooth surface of outputted model, it gave some optimization approaches. Given numerical example about the model can show that this designed gear with spherical involute tooth profile can achieve fast and accurate parametric modeling and provide a foundation for tooth contact analysis （TCA） in digitized design and manufacture.展开更多
The formula for the engaging curve of the pinion cutter with pitholes and the formula forthe theoretical tooth profile of the tinion cutter for the generating gearing of pinhoes are developedbased on the engaging theo...The formula for the engaging curve of the pinion cutter with pitholes and the formula forthe theoretical tooth profile of the tinion cutter for the generating gearing of pinhoes are developedbased on the engaging theory. The substitute curve of the theoretical tooth profile of the pinion cut-ter is determined by the least square method.展开更多
A three-dimensional conjugate tooth surface design method for Harmonic Drive with a double-circular-arc tooth profle is proposed. The radial deformation function of the fexspline (FS), obtained through Finite Element ...A three-dimensional conjugate tooth surface design method for Harmonic Drive with a double-circular-arc tooth profle is proposed. The radial deformation function of the fexspline (FS), obtained through Finite Element (FE) analysis, is incorporated into the kinematics model. By analyzing the FS tooth enveloping process, the optimization of the overlapping conjugate tooth profle is achieved. By utilizing the hobbing process, the three-dimensional machinable tooth surface of FS can be acquired. Utilizing the coning deformation of the FS, simulations are conducted to analyze the multi-section assembly and meshing motion of the machinable tooth surface. The FE method is utilized to analyze and compare the loaded contact characteristics. Results demonstrate that the proposed design method can achieve an internal gear pair consisting of a circular spline with a spur gear tooth surface and the FS with a machinable tooth surface. With the rated torque, approximately 24% of the FS teeth are engaged in meshing, and more than 4/5 of the tooth surface in the axial direction carries the load. The contact patterns, maximum contact pressure, and transmission error of the machinable tooth surface are 227.2%, 40.67%, and 71.24% of those on the spur gear tooth surface, respectively. It clearly demonstrates exceptional transmission performance.展开更多
Objective: We report the results of Y-chromosomal profile and mtDNA (mitochondrial DNA) of the Chevalier Bayard (1476?-1524). Methods: His genomic DNA was extracted from a tooth of his mandible. His Y-STRs profile was...Objective: We report the results of Y-chromosomal profile and mtDNA (mitochondrial DNA) of the Chevalier Bayard (1476?-1524). Methods: His genomic DNA was extracted from a tooth of his mandible. His Y-STRs profile was obtained using the AmFirst identifier PCR amplification kit. The mtDNA genomic sequence intervals for HVR1 and HVR2 were amplified by PCR, with specific primers. Results: We obtained the complete STR (Short Tandem Repeats) profile, based on fourteen STRs (DYS19, DYS385.a, DYS389.I and .b, DYS390, DYS391, DYS392, DYS393, DYS438, DYS439, DYS448, DYS456 and DYS458 and Y-GATA-H4). The deduced Y-STRs profile corresponds to the sub-clade S21 of the major European haplogroup R1b-M269 (the “Germanic” haplotype). There are six mutations (16093C, 16211T and 16519C in the HVR1 sequence, 263G, 309.1C and 315.1C in the HVR2 sequence) in the mtDNA of Bayard. The 263G mutation determines the H mtDNA haplogroup and the 16211T suggests the H5 sub-clade of the H haplogroup (a sub-clade found at >8% frequency in France, at the periphery of the Alpine arch region). This sub-clade H5 (subsequently assimilated to the H10e haplotype) is that (with a perfect match) of a modern living male related (to 32 generations) to the Bayard maternal ascendance. The Bayard mtDNA haplotype was found once only in a database of 100 South-German mtDNA control sequences. Conclusions: The resulting R1b-M269 Y haplogroup established confirms the Germanic origin of the Bayard ancestors, suggested by genealogic studies concerning his paternal ascendance. The result concerning the mtDNA H10e haplotype found in the modern living male related to Bayard by matrilinear ascendance establishes that the DNA tooth is well of him, with a 99% of chance.展开更多
In this paper, the effects of profile shift in cylindrical helical gear mechanisms have been investigated with numerical and analytical calculations. The mathematical model for computer simulation of gears has been de...In this paper, the effects of profile shift in cylindrical helical gear mechanisms have been investigated with numerical and analytical calculations. The mathematical model for computer simulation of gears has been designed and the numerical calculations have been carried out. Analytical calculations have been made with an excel program which was designed at different profile shift coefficients for a selected mechanism. Analytical calculations of the same mechanism have been verified by using ANSYS 14.5. The results of analytical and numerical solutions have been compared to profile shift coefficients.展开更多
The plastic gear is widely used in agricultural equipment,electronic products,aircraft,and other fields because of its light weight,corrosion resistance,and self-lubrication ability.However,it has a limited range of w...The plastic gear is widely used in agricultural equipment,electronic products,aircraft,and other fields because of its light weight,corrosion resistance,and self-lubrication ability.However,it has a limited range of working conditions due to the low modulus and thermal deformation of the material,especially in high-speed and heavy-duty situations.A compensation modification method(CMM)is proposed in this paper to restrain the heat production of the plastic gear tooth surface by considering the meshing deformation,and the corresponding modification formulas are derived.Improving the position of the maximum contact pressure(CP)and the relative sliding velocity(RSV)of the tooth surface resulted in a 30%lower steady-state temperature rise of the modified plastic gear tooth surface than that of the unmodified plastic gear.Meanwhile,the temperature rise of plastic gear with CMM is reduced by 19%compared with the traditional modification of removal material.Then,the influences of modification index and the segment number of modification on the meshing characteristics of plastic gear with CMM are discussed,such as maximum CP and steadystate temperature rise,RSV,transmission error,meshing angle,and contact ratio.A smaller segment number and modification index are beneficial to reduce the temperature rise of plastic gear with CMM.Finally,an experiment is carried out to verify the theoretical analysis model.展开更多
基金Supported by National Natural Science Foundation of China (Grant No.52275061)。
文摘Profile shift is a highly effective technique for optimizing the performance of spur gear transmission systems.However,tooth surface wear is inevitable during gear meshing due to inadequate lubrication and long-term operation.Both profile shift and tooth surface wear(TSW)can impact the meshing characteristics by altering the involute tooth profile.In this study,a tooth stiffness model of spur gears that incorporates profile shift,TSW,tooth deformation,tooth contact deformation,fillet-foundation deformation,and gear body structure coupling is established.This model efficiently and accurately determines the time-varying mesh stiffness(TVMS).Additionally,an improved wear depth prediction method for spur gears is developed,which takes into consideration the mutually prime teeth numbers and more accurately reflects actual gear meshing conditions.Results show that consideration of the mutual prime of teeth numbers will have a certain impact on the TSW process.Furthermore,the finite element method(FEM)is employed to accurately verify the values of TVMS and load sharing ratio(LSR)of profile-shifted gears and worn gears.This study quantitatively analyzes the effect of profile shift on the surface wear process,which suggests that gear profile shift can partially alleviate the negative effects of TSW.The contribution of this study provides valuable insights into the design and maintenance of spur gear systems.
基金This project is supported by National Natural Science Foundation of China (No.59905018) Provincial Excellent Young Scientist Foundation of Shandong (No.01BS033).
文摘A new method named orthogonal two-way link-shift here has been proposed.Based on the method and a standard involute gear hob, a specific gear tooth profile (including anarbitrary gear tooth profile and a modified involute gear tooth profile) can be generated on aCNC(computer numerical control) bobbing machine. Computer simulation has been carried out, and theresults prove that the method is right and practicable. So, the fabrication costs can be greatlydecreased than before. The new method has momentous significance to realize gear's optimizedmodification under different work conditions.
基金Projects(51605361,51505357) supported by the National Natural Science Foundation of ChinaProjects(XJS16041,JB160411) supported by the Fundamental Research Funds for the Central Universities,China
文摘A dynamic model of a helical gear rotor system is proposed.Firstly,a generally distributed dynamic model of a helical gear pair with tooth profile errors is developed.The gear mesh is represented by a pair of cylinders connected by a series of springs and the stiffness of each spring is equal to the effective mesh stiffness.Combining the gear dynamic model with the rotor-bearing system model,the gear-rotor-bearing dynamic model is developed.Then three cases are presented to analyze the dynamic responses of gear systems.The results reveal that the gear dynamic model is effective and advanced for general gear systems,narrow-faced gear,wide-faced gear and gear with tooth profile errors.Finally,the responses of an example helical gear system are also studied to demonstrate the influence of the lead crown reliefs and misalignments.The results show that both of the lead crown relief and misalignment soften the gear mesh stiffness and the responses of the gear system increase with the increasing lead crown reliefs and misalignments.
基金Supported by the National Natural Science Foundation of China(51105194)the Scientific Research Funding of Nanjing University of Aeronautics and Astronautics(NP2011014)
文摘In order to analyze the influence of setting error of tool on both tooth profile and contact characteristic of orthogonal face gear drive,the coordinate systems with and without setting error are established.Moreover,the equations of tooth profile and contact points of face gear drive are derived by envelope principle.According to the equations,the change of tooth profile and the contact points position on face gear are analyzed.The tooth surface and contact points are obtained by numerical simulation.Results show that the tooth profile and contact characteristic of face gear drive are not sensitive to the setting error of tool.
基金Sponsored by the National Natural Science Foundation of China(Grant No.2009AA04Z404)
文摘Based on Newton ' s second law,the bend-torsion-shaft coupling nonlinear dynamic model and equations of power split gear transmission system are established.According to the principle of tooth profile modification,the tooth profile modification is considered as time-varying gear backlash function acting along the line of action.Then the dynamic functions are solved by using Runge-Kutta numerical method.After analyzing the effect of tooth profile modification quantity( TPMQ) and relative tooth profile modification length( TPML) to the nonlinear dynamic characteristics of power split gear transmission,the following conclusions are drawn:1 The TPMQ of a certain stage transmission affects the vibration of its own stage more significantly than the other stage,and the coupling effect between two stages can be ignored usually in the modification design;2 If the first stage TPMLs are less than 0.3,the influence of the first stage TPMLs to the first stage transmission vibration is much more greatly than the influence of the second stage TPMLs to the first stage transmission vibration,or else both the first and second stage TPMLs affect the first stage transmission vibration largely.The same is true for the second stage TPMLs,and the cutoff value is 0.2;3 The TPMQ affects the vibration of power split gear transmission system more principally than the TPML,and should be top-priority in the modification design.
文摘A small hole of 0.9mm in diameter is drilled at the theoretical contact point of the convex tooth flank of the measured gear, and the hole leads throughout to the non-working flank. A stylus glued to the core of transformer is put into the hole, and the stylus can freely contact with the meshed concave tooth flank. The transformer is installed on the body of gear to be measured. Rotate the positioning worm slowly after loading, and locate the contact point at the hole of convex tooth flank, the displacement value measured is considered as the deformation of convex tooth. The deformations at the middle and the two ends of tooth breadth for the helical gears with double-circular-cra tooth profile whose modules are 3mm and 4mm respectively are measured in the paper.
基金supported by the National Natural Science Foundation of China (Nos.51205335, 51375411)the Scientific Research for the High Level Talent of Nanjing Institute of Technology (No.YKJ201702)
文摘An active design method of tooth profiles for cycloid gears based on their meshing efficiency is proposed.This method takes the meshing efficiency as one of the design variables to determine the tooth profiles.The calculation method for the meshing efficiency of planetary transmission is analyzed and the equation of the meshing efficiency is deduced.Relationships between the meshing efficiency,the radius of the pin wheel and the eccentric distance are revealed.The design constraint quations and the strength constraint quations are deduced.On the basis of this,a design procedure is laid out.Some examples using different input parameters are conducted to demonstrate the feasibility of the approach.A dynamic simulation of the rigid flexible coupling of cycloid gears is also presented.The results show that the proposed design method is more flexible to control the tooth profiles by changing the input values of the transmission efficiency.
基金National Natural Science Foundation of China(No.51205425)National Science&Technology Pillar Program during the 12th Five-Year Plan Period of China(No.2013BAF01B04)
文摘The transmission characteristics of gear drive can be improved with the use of novel tooth profiles.A theoretical study on tooth profile of the hypocycloid pinwheel transmission and contact analysis of gear pair based on finite element method(FEM) are carried out,respectively.The line contact between mated tooth surfaces becomes point contact according to a plus movement.Through loaded tooth contact analysis(LTCA),the contact stress and load distributions for the proposed hypocycloid pinwheel transmission and the traditional one are discussed.The analysis results show that the developed tooth surfaces have anticipatory point contact characteristics under loads and contact fatigue dangerous area locates around the ultimate contact position.
基金Projects(51205335,51375411)supported by the National Natural Science Foundation of ChinaProjects(2013J01209,2012J01237)supported by the Natural Science Foundation of Fujian Province,China+2 种基金Project(2014H0049)supported by the Major S&T Program of Fujian Province,ChinaProject(E201400800)supported by the International Cooperation and Exchange Research Plan of Xiamen University of Technology,ChinaProject(YKJ14008R)supported by the Scientific Research for the High Level Talent of Xiamen University of Technology,China
文摘A mathematical model of gear tooth profiles using the ellipse curve, whose curvature is convenient to control by changing the mathematical parameters as its line of action, was built based on the meshing theory. The equation of undercutting condition was derived from the model. A special epicycloidal tooth profile was also presented. An example gear drive with variation of the ellipse parameters was taken to illustrate the proposed method. The contact ratio of the gear drive designed by the proposed method was analyzed. A comparison of the property of the gear drive designed with the involute gear drive was also carried out. The results confirm that the proposed gear drive has higher contact ratio in comparison with the involute gear drive.
文摘Distinguishing with traditional tooth profile of spiral bevel and hypoid gear, it proposed a new tooth profile namely the spherical involute. Firstly, a new theory of forming the spherical involute tooth profile was proposed. Then, this theory was applied to complete parametric derivation of each part of its tooth profile. For enhancing the precision, the SWEEP method used for formation of each part of tooth surface and G1 stitching schema for obtaining a unified tooth surface are put forward and made the application in the accurate modeling. Lastly, owing to the higher accuracy of tooth surface of outputted model, it gave some optimization approaches. Given numerical example about the model can show that this designed gear with spherical involute tooth profile can achieve fast and accurate parametric modeling and provide a foundation for tooth contact analysis （TCA） in digitized design and manufacture.
文摘The formula for the engaging curve of the pinion cutter with pitholes and the formula forthe theoretical tooth profile of the tinion cutter for the generating gearing of pinhoes are developedbased on the engaging theory. The substitute curve of the theoretical tooth profile of the pinion cut-ter is determined by the least square method.
基金Supported by Guangdong Provincial Key-Area Research and Development Program(Grant No.2019B090917002).
文摘A three-dimensional conjugate tooth surface design method for Harmonic Drive with a double-circular-arc tooth profle is proposed. The radial deformation function of the fexspline (FS), obtained through Finite Element (FE) analysis, is incorporated into the kinematics model. By analyzing the FS tooth enveloping process, the optimization of the overlapping conjugate tooth profle is achieved. By utilizing the hobbing process, the three-dimensional machinable tooth surface of FS can be acquired. Utilizing the coning deformation of the FS, simulations are conducted to analyze the multi-section assembly and meshing motion of the machinable tooth surface. The FE method is utilized to analyze and compare the loaded contact characteristics. Results demonstrate that the proposed design method can achieve an internal gear pair consisting of a circular spline with a spur gear tooth surface and the FS with a machinable tooth surface. With the rated torque, approximately 24% of the FS teeth are engaged in meshing, and more than 4/5 of the tooth surface in the axial direction carries the load. The contact patterns, maximum contact pressure, and transmission error of the machinable tooth surface are 227.2%, 40.67%, and 71.24% of those on the spur gear tooth surface, respectively. It clearly demonstrates exceptional transmission performance.
文摘Objective: We report the results of Y-chromosomal profile and mtDNA (mitochondrial DNA) of the Chevalier Bayard (1476?-1524). Methods: His genomic DNA was extracted from a tooth of his mandible. His Y-STRs profile was obtained using the AmFirst identifier PCR amplification kit. The mtDNA genomic sequence intervals for HVR1 and HVR2 were amplified by PCR, with specific primers. Results: We obtained the complete STR (Short Tandem Repeats) profile, based on fourteen STRs (DYS19, DYS385.a, DYS389.I and .b, DYS390, DYS391, DYS392, DYS393, DYS438, DYS439, DYS448, DYS456 and DYS458 and Y-GATA-H4). The deduced Y-STRs profile corresponds to the sub-clade S21 of the major European haplogroup R1b-M269 (the “Germanic” haplotype). There are six mutations (16093C, 16211T and 16519C in the HVR1 sequence, 263G, 309.1C and 315.1C in the HVR2 sequence) in the mtDNA of Bayard. The 263G mutation determines the H mtDNA haplogroup and the 16211T suggests the H5 sub-clade of the H haplogroup (a sub-clade found at >8% frequency in France, at the periphery of the Alpine arch region). This sub-clade H5 (subsequently assimilated to the H10e haplotype) is that (with a perfect match) of a modern living male related (to 32 generations) to the Bayard maternal ascendance. The Bayard mtDNA haplotype was found once only in a database of 100 South-German mtDNA control sequences. Conclusions: The resulting R1b-M269 Y haplogroup established confirms the Germanic origin of the Bayard ancestors, suggested by genealogic studies concerning his paternal ascendance. The result concerning the mtDNA H10e haplotype found in the modern living male related to Bayard by matrilinear ascendance establishes that the DNA tooth is well of him, with a 99% of chance.
文摘In this paper, the effects of profile shift in cylindrical helical gear mechanisms have been investigated with numerical and analytical calculations. The mathematical model for computer simulation of gears has been designed and the numerical calculations have been carried out. Analytical calculations have been made with an excel program which was designed at different profile shift coefficients for a selected mechanism. Analytical calculations of the same mechanism have been verified by using ANSYS 14.5. The results of analytical and numerical solutions have been compared to profile shift coefficients.
基金supported by the Core Technology Application of Hubei Agricultural Machinery Equipment,China(Grant No.HBSNYT202221).
文摘The plastic gear is widely used in agricultural equipment,electronic products,aircraft,and other fields because of its light weight,corrosion resistance,and self-lubrication ability.However,it has a limited range of working conditions due to the low modulus and thermal deformation of the material,especially in high-speed and heavy-duty situations.A compensation modification method(CMM)is proposed in this paper to restrain the heat production of the plastic gear tooth surface by considering the meshing deformation,and the corresponding modification formulas are derived.Improving the position of the maximum contact pressure(CP)and the relative sliding velocity(RSV)of the tooth surface resulted in a 30%lower steady-state temperature rise of the modified plastic gear tooth surface than that of the unmodified plastic gear.Meanwhile,the temperature rise of plastic gear with CMM is reduced by 19%compared with the traditional modification of removal material.Then,the influences of modification index and the segment number of modification on the meshing characteristics of plastic gear with CMM are discussed,such as maximum CP and steadystate temperature rise,RSV,transmission error,meshing angle,and contact ratio.A smaller segment number and modification index are beneficial to reduce the temperature rise of plastic gear with CMM.Finally,an experiment is carried out to verify the theoretical analysis model.
