When investigating the vortex-induced vibration(VIV)of marine risers,extrapolating the dynamic response on the entire length based on limited sensor measurements is a crucial step in both laboratory experiments and fa...When investigating the vortex-induced vibration(VIV)of marine risers,extrapolating the dynamic response on the entire length based on limited sensor measurements is a crucial step in both laboratory experiments and fatigue monitoring of real risers.The problem is conventionally solved using the modal decomposition method,based on the principle that the response can be approximated by a weighted sum of limited vibration modes.However,the method is not valid when the problem is underdetermined,i.e.,the number of unknown mode weights is more than the number of known measurements.This study proposed a sparse modal decomposition method based on the compressed sensing theory and the Compressive Sampling Matching Pursuit(Co Sa MP)algorithm,exploiting the sparsity of VIV in the modal space.In the validation study based on high-order VIV experiment data,the proposed method successfully reconstructed the response using only seven acceleration measurements when the conventional methods failed.A primary advantage of the proposed method is that it offers a completely data-driven approach for the underdetermined VIV reconstruction problem,which is more favorable than existing model-dependent solutions for many practical applications such as riser structural health monitoring.展开更多
The traditional methods for synthesizing flexible heat exchanger networks(HENs)are not directly applicable to inter-plant HEN challenges,primarily due to the spread of system uncertainty across plants via intermedium ...The traditional methods for synthesizing flexible heat exchanger networks(HENs)are not directly applicable to inter-plant HEN challenges,primarily due to the spread of system uncertainty across plants via intermedium fluid circles.This complicates the synthesis process significantly.To tackle this issue,this study proposes a decomposed stepwise methodology to facilitate the flexible synthesis of the interplant HENs performing indirect heat integration.A decomposition strategy is proposed to divide the overall network into manageable sub-networks by dissecting the intermedium fluid circles.To address the variability in intermedium fluid temperatures,a temperature fluctuation analysis approach is developed and a heuristic rule is introduced to maintain the temperature feasibility of the intermedium fluids.To ensure adequate flexibility and cost-effectiveness of the designed networks,flexibility analysis and network retrofit steps are conducted through model-based optimization techniques.The efficacy of the method is demonstrated through two case studies,showing its potential in achieving the desired operational flexibility for inter-plant HENs.展开更多
This paper provides a nonlinear pseudo-hyperbolic partial differential equation with non-local conditions.Despite the importance of this problem,the exact solution to this problem is rare in the literature.Therefore,t...This paper provides a nonlinear pseudo-hyperbolic partial differential equation with non-local conditions.Despite the importance of this problem,the exact solution to this problem is rare in the literature.Therefore,the Laplace-Adomian Decomposition Method(LADM)is used to provide a new approach to solving this problem.Additionally,we give a comparison between the exact and approximate solutions at various points with absolute error.The obtained result showed that the proposed method is effective and accurate for this problem and can be used for many other evolution of nonlinear equations in mathematical physics.展开更多
We employ the Duan-Rach-Wazwaz modified Adomian decomposition method for solving initial value problems for the systems of nonlinear ordinary differential equations numerically. In order to confirm practicality, robus...We employ the Duan-Rach-Wazwaz modified Adomian decomposition method for solving initial value problems for the systems of nonlinear ordinary differential equations numerically. In order to confirm practicality, robustness and reliability of the method, we compare the results from the modified Adomian decomposition method with those from the MATHEMATICA solutions and also from the fourth-order Runge Kutta method solutions in some cases. Furthermore, we apply Padé approximants technique to improve the solutions of the modified decomposition method whenever the exact solutions exist.展开更多
In this study, we constructed and analysed a mathematical model of COVID-19 in order to comprehend the transmission dynamics of the disease. The reproduction number (R<sub>C</sub>) was calculated via the n...In this study, we constructed and analysed a mathematical model of COVID-19 in order to comprehend the transmission dynamics of the disease. The reproduction number (R<sub>C</sub>) was calculated via the next generation matrix method. We also used the Lyaponuv method to show the global stability of both the disease free and endemic equilibrium points. The results showed that the disease-free equilibrium point is globally asymptotically stable if R<sub>C</sub> R<sub>C</sub> > 1. We further used the Adomian decomposition method and the modified Adomian decomposition method to obtain the solutions of the model. Numerical analysis of the model was done using Sagemath 9.0 software.展开更多
The Modified Adomian Decomposition Method (MADM) is presented. A number of problems are solved to show the efficiency of the method. Further, a new solution scheme for solving boundary value problems with Neumann cond...The Modified Adomian Decomposition Method (MADM) is presented. A number of problems are solved to show the efficiency of the method. Further, a new solution scheme for solving boundary value problems with Neumann conditions is proposed. The scheme is based on the modified Adomian decomposition method and the inverse linear operator theorem. Several differential equations with Neumann boundary conditions are solved to demonstrate the high accuracy and efficiency of the proposed scheme.展开更多
In this study, the effects of magnetic field and nanoparticle on the Jeffery- Hamel flow are studied using a powerful analytical method called the Adomian decomposition method （ADM）. The traditional Navier-Stokes eq...In this study, the effects of magnetic field and nanoparticle on the Jeffery- Hamel flow are studied using a powerful analytical method called the Adomian decomposition method （ADM）. The traditional Navier-Stokes equation of fluid mechanics and Maxwell＇s electromagnetism governing equations are reduced to nonlinear ordinary differential equations to model the problem. The obtained results are well agreed with that of the Runge-Kutta method. The present plots confirm that the method has high accuracy for different a, Ha, and Re numbers. The flow field inside the divergent channel is studied for various values of Hartmann ：number and angle of channel. The effect of nanoparticle volume fraction in the absence of magnetic field is investigated.展开更多
The study reveals analytically on the 3-dimensional viscous time-dependent gyrotactic bioconvection in swirling nanofluid flow past from a rotating disk.It is known that the deformation of the disk is along the radial...The study reveals analytically on the 3-dimensional viscous time-dependent gyrotactic bioconvection in swirling nanofluid flow past from a rotating disk.It is known that the deformation of the disk is along the radial direction.In addition to that Stefan blowing is considered.The Buongiorno nanofluid model is taken care of assuming the fluid to be dilute and we find Brownian motion and thermophoresis have dominant role on nanoscale unit.The primitive mass conservation equation,radial,tangential and axial momentum,heat,nano-particle concentration and micro-organism density function are developed in a cylindrical polar coordinate system with appropriate wall(disk surface)and free stream boundary conditions.This highly nonlinear,strongly coupled system of unsteady partial differential equations is normalized with the classical von Kármán and other transformations to render the boundary value problem into an ordinary differential system.The emerging 11th order system features an extensive range of dimensionless flow parameters,i.e.,disk stretching rate,Brownian motion,thermophoresis,bioconvection Lewis number,unsteadiness parameter,ordinary Lewis number,Prandtl number,mass convective Biot number,Péclet number and Stefan blowing parameter.Solutions of the system are obtained with developed semi-analytical technique,i.e.,Adomian decomposition method.Validation of the said problem is also conducted with earlier literature computed by Runge-Kutta shooting technique.展开更多
Refinery scheduling attracts increasing concerns in both academic and industrial communities in recent years.However, due to the complexity of refinery processes, little has been reported for success use in real world...Refinery scheduling attracts increasing concerns in both academic and industrial communities in recent years.However, due to the complexity of refinery processes, little has been reported for success use in real world refineries. In academic studies, refinery scheduling is usually treated as an integrated, large-scale optimization problem,though such complex optimization problems are extremely difficult to solve. In this paper, we proposed a way to exploit the prior knowledge existing in refineries, and developed a decision making system to guide the scheduling process. For a real world fuel oil oriented refinery, ten adjusting process scales are predetermined. A C4.5 decision tree works based on the finished oil demand plan to classify the corresponding category(i.e. adjusting scale). Then,a specific sub-scheduling problem with respect to the determined adjusting scale is solved. The proposed strategy is demonstrated with a scheduling case originated from a real world refinery.展开更多
This paper presents a comparison among Adomian decomposition method (ADM), Wavelet-Galerkin method (WGM), the fully explicit (1,7) finite difference technique (FTCS), the fully implicit (7,1) finite difference method ...This paper presents a comparison among Adomian decomposition method (ADM), Wavelet-Galerkin method (WGM), the fully explicit (1,7) finite difference technique (FTCS), the fully implicit (7,1) finite difference method (BTCS), (7,7) Crank-Nicholson type finite difference formula (C-N), the fully explicit method (1,13) and 9-point finite difference method, for solving parabolic differential equations with arbitrary boundary conditions and based on weak form functionals in finite domains. The problem is solved rapidly, easily and elegantly by ADM. The numerical results on a 2D transient heat conducting problem and 3D diffusion problem are used to validate the proposed ADM as an effective numerical method for solving finite domain parabolic equations. The numerical results showed that our present method is less time consuming and is easier to use than other methods. In addition, we prove the convergence of this method when it is applied to the nonlinear parabolic equation.展开更多
The existing oil import dependence index cannot exactly measure the economic cost or scales, and it is difficult to describe the economical aspect of oil security. To measure the foreign dependence of one country'...The existing oil import dependence index cannot exactly measure the economic cost or scales, and it is difficult to describe the economical aspect of oil security. To measure the foreign dependence of one country's economy and reflect its oil economic security, this paper defines the net oil import intensity as the ratio of net oil import cost to GDP. By using Divisia Index Decomposition, the change of net oil import intensity in five industrialized countries and five newly industrialized countries during 1971—2010 is decomposed into five factors: oil price, oil intensity, oil self-sufficiency, domestic price level and exchange rate. The result shows that the dominating factors are oil price and oil intensity; moreover, the newly industrialized countries have higher net oil import intensity than industrialized countries.展开更多
In this paper, an absorbing Fictitious Boundary Condition (FBC) is presented to generate an iterative Domain Decomposition Method (DDM) for analyzing waveguide problems.The relaxed algorithm is introduced to improve t...In this paper, an absorbing Fictitious Boundary Condition (FBC) is presented to generate an iterative Domain Decomposition Method (DDM) for analyzing waveguide problems.The relaxed algorithm is introduced to improve the iterative convergence. And the matrix equations are solved using the multifrontal algorithm. The resulting CPU time is greatly reduced.Finally, a number of numerical examples are given to illustrate its accuracy and efficiency.展开更多
Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribut...Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribution on transverse relaxation time axis,the T2 spectrum can be decomposed into 2 to 5 independent component spectra by fitting the T2 spectrum with Gauss functions.By analyzing the free relaxation response characteristics of crude oil and formation water,the dynamic response characteristics of the core mutual drive between oil and water,the petrophysical significance of each component spectrum is clarified.T2 spectrum can be decomposed into clay bound water component spectrum,capillary bound fluid component spectrum,micropores fluid component spectrum and macropores fluid component spectrum.According to the nature of crude oil in the target area,the distribution range of T2 component spectral peaks of oil-bearing reservoir is 165-500 ms on T2 time axis.This range can be used to accurately identify fluid properties.This method has high adaptability in identifying complex oil and water layers in low porosity and permeability reservoirs.展开更多
The aim of this paper is to apply the relatively new Adomian decomposition method to solving the system of linear fractional, in the sense of Riemann-Liouville and Caputo respectively, differential equations. The solu...The aim of this paper is to apply the relatively new Adomian decomposition method to solving the system of linear fractional, in the sense of Riemann-Liouville and Caputo respectively, differential equations. The solutions are expressed in terms of Mittag-Leffier functions of matric argument. The Adomian decomposition method is straightforward, applicable for broader problems and avoids the difficulties in applying integral transforms. As the order is 1, the result here is simplified to that of first order differential equation.展开更多
Consider acoustic wave scattering by multiple obstacles with different sound properties on the boundary, which can be modeled by a mixed boundary value problem for the Helmholtz equation in frequency domain. Compared ...Consider acoustic wave scattering by multiple obstacles with different sound properties on the boundary, which can be modeled by a mixed boundary value problem for the Helmholtz equation in frequency domain. Compared with the standard scattering problem for one obstacle, the difficulty of such a new problem is the interaction of scattered wave by different obstacles. A decomposition method for solving this multiple scattering problem is developed. Using the boundary integral equation method, we decompose the total scattered field into a sum of contributions by separated obstacles. Each contribution corresponds to scattering problem of single obstacle. However, all the single scattering problems are coupled via the boundary conditions, representing the physical interaction of scattered wave by different obstacles. We prove the feasibility of such a decomposition. To compute these contributions efficiently, an iteration algorithm of Jacobi type is proposed, decoupling the interaction of scattered wave from the numerical points of view. Under the well-separation assumptions on multiple obstacles, we prove the convergence of iteration sequence generated by the Jacobi algorithm, and give the error estimate between exact scattered wave and the iteration solution in terms of the obstacle size and the minimal distance of multiple obstacles. Such a quantitative description reveals the essences of wave scattering by multiple obstacles. Numerical examples showing the accuracy and convergence of our method are presented.展开更多
A higher-order boundary element method(HOBEM) for simulating the fully nonlinear regular wave propagation and diffraction around a fixed vertical circular cylinder is investigated. The domain decomposition method with...A higher-order boundary element method(HOBEM) for simulating the fully nonlinear regular wave propagation and diffraction around a fixed vertical circular cylinder is investigated. The domain decomposition method with continuity conditions enforced on the interfaces between the adjacent sub-domains is implemented for reducing the computational cost. By adjusting the algorithm of iterative procedure on the interfaces, four types of coupling strategies are established, that is, Dirchlet/Dirchlet-Neumman/Neumman(D/D-N/N), Dirchlet-Neumman(D-N),Neumman-Dirchlet(N-D) and Mixed Dirchlet-Neumman/Neumman-Dirchlet(Mixed D-N/N-D). Numerical simulations indicate that the domain decomposition methods can provide accurate results compared with that of the single domain method. According to the comparisons of computational efficiency, the D/D-N/N coupling strategy is recommended for the wave propagation problem. As for the wave-body interaction problem, the Mixed D-N/N-D coupling strategy can obtain the highest computational efficiency.展开更多
The Adomian decomposition method （ADM） and Pade approximants are combined to solve the well-known Blaszak-Marciniak lattice, which has rich mathematical structures and many important applications in physics and math...The Adomian decomposition method （ADM） and Pade approximants are combined to solve the well-known Blaszak-Marciniak lattice, which has rich mathematical structures and many important applications in physics and mathematics. In some cases, the truncated series solution of ADM is adequate only in a small region when the exact solution is not reached. To overcome the drawback, the Pade approximants, which have the advantage in turning the polynomials approximation into a rational function, are applied to the series solution to improve the accuracy and enlarge the convergence domain. By using the ADM-Pade technique, the soliton solutions of the Blaszak-Marciniak lattice are constructed with better accuracy and better convergence than by using the ADM alone. Numerical and figurative illustrations show that it is a promising tool for solving nonlinear problems.展开更多
Combining Adomian decomposition method （ADM） with Pade approximants, we solve two differentiaidifference equations （DDEs）： the relativistic Toda lattice equation and the modified Volterra lattice equation. With t...Combining Adomian decomposition method （ADM） with Pade approximants, we solve two differentiaidifference equations （DDEs）： the relativistic Toda lattice equation and the modified Volterra lattice equation. With the help of symbolic computation Maple, the results obtained by ADM-Pade technique are compared with those obtained by using ADM alone. The numerical results demonstrate that ADM-Pade technique give the approximate solution with faster convergence rate and higher accuracy and relative in larger domain of convergence than using ADM.展开更多
In this paper, exact and numerical solutions are calculated for discrete complex Ginzburg-Landau equation with initial condition by considering the modified Adomian decomposition method （mADM）, which is an efficient...In this paper, exact and numerical solutions are calculated for discrete complex Ginzburg-Landau equation with initial condition by considering the modified Adomian decomposition method （mADM）, which is an efficient method and does not need linearization, weak nonlinearity assumptions or perturbation theory. The numerical solutions are also compared with their corresponding analytical solutions. It is shown that a very good approximation is achieved with the analytical solutions. Finally, the modulational instability is investigated and the corresponding condition is given.展开更多
The present paper is devoted to the convergence control and accelerating the traditional Decomposition Methodof Adomian (ADM). By means of perturbing the initial or early terms of the Adomian iterates by adding aparam...The present paper is devoted to the convergence control and accelerating the traditional Decomposition Methodof Adomian (ADM). By means of perturbing the initial or early terms of the Adomian iterates by adding aparameterized term, containing an embedded parameter, new modified ADM is constructed. The optimal value ofthis parameter is later determined via squared residual minimizing the error. The failure of the classical ADM is alsoprevented by a suitable value of the embedded parameter, particularly beneficial for the Duan–Rach modification ofthe ADM incorporating all the boundaries into the formulation. With the presented squared residual error analysis,there is no need to check out the results against the numerical ones, as usually has to be done in the traditional ADMstudies to convince the readers that the results are indeed converged to the realistic solutions. Physical examplesselected from the recent application of ADM demonstrate the validity, accuracy and power of the presented novelapproach in this paper. Hence, the highly nonlinear equations arising from engineering applications can be safelytreated by the outlined method for which the classical ADM may fail or be slow to converge.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51109158,U2106223)the Science and Technology Development Plan Program of Tianjin Municipal Transportation Commission(Grant No.2022-48)。
文摘When investigating the vortex-induced vibration(VIV)of marine risers,extrapolating the dynamic response on the entire length based on limited sensor measurements is a crucial step in both laboratory experiments and fatigue monitoring of real risers.The problem is conventionally solved using the modal decomposition method,based on the principle that the response can be approximated by a weighted sum of limited vibration modes.However,the method is not valid when the problem is underdetermined,i.e.,the number of unknown mode weights is more than the number of known measurements.This study proposed a sparse modal decomposition method based on the compressed sensing theory and the Compressive Sampling Matching Pursuit(Co Sa MP)algorithm,exploiting the sparsity of VIV in the modal space.In the validation study based on high-order VIV experiment data,the proposed method successfully reconstructed the response using only seven acceleration measurements when the conventional methods failed.A primary advantage of the proposed method is that it offers a completely data-driven approach for the underdetermined VIV reconstruction problem,which is more favorable than existing model-dependent solutions for many practical applications such as riser structural health monitoring.
基金financial support provided by the National Natural Science Foundation of China(22378045,22178045).
文摘The traditional methods for synthesizing flexible heat exchanger networks(HENs)are not directly applicable to inter-plant HEN challenges,primarily due to the spread of system uncertainty across plants via intermedium fluid circles.This complicates the synthesis process significantly.To tackle this issue,this study proposes a decomposed stepwise methodology to facilitate the flexible synthesis of the interplant HENs performing indirect heat integration.A decomposition strategy is proposed to divide the overall network into manageable sub-networks by dissecting the intermedium fluid circles.To address the variability in intermedium fluid temperatures,a temperature fluctuation analysis approach is developed and a heuristic rule is introduced to maintain the temperature feasibility of the intermedium fluids.To ensure adequate flexibility and cost-effectiveness of the designed networks,flexibility analysis and network retrofit steps are conducted through model-based optimization techniques.The efficacy of the method is demonstrated through two case studies,showing its potential in achieving the desired operational flexibility for inter-plant HENs.
文摘This paper provides a nonlinear pseudo-hyperbolic partial differential equation with non-local conditions.Despite the importance of this problem,the exact solution to this problem is rare in the literature.Therefore,the Laplace-Adomian Decomposition Method(LADM)is used to provide a new approach to solving this problem.Additionally,we give a comparison between the exact and approximate solutions at various points with absolute error.The obtained result showed that the proposed method is effective and accurate for this problem and can be used for many other evolution of nonlinear equations in mathematical physics.
文摘We employ the Duan-Rach-Wazwaz modified Adomian decomposition method for solving initial value problems for the systems of nonlinear ordinary differential equations numerically. In order to confirm practicality, robustness and reliability of the method, we compare the results from the modified Adomian decomposition method with those from the MATHEMATICA solutions and also from the fourth-order Runge Kutta method solutions in some cases. Furthermore, we apply Padé approximants technique to improve the solutions of the modified decomposition method whenever the exact solutions exist.
文摘In this study, we constructed and analysed a mathematical model of COVID-19 in order to comprehend the transmission dynamics of the disease. The reproduction number (R<sub>C</sub>) was calculated via the next generation matrix method. We also used the Lyaponuv method to show the global stability of both the disease free and endemic equilibrium points. The results showed that the disease-free equilibrium point is globally asymptotically stable if R<sub>C</sub> R<sub>C</sub> > 1. We further used the Adomian decomposition method and the modified Adomian decomposition method to obtain the solutions of the model. Numerical analysis of the model was done using Sagemath 9.0 software.
文摘The Modified Adomian Decomposition Method (MADM) is presented. A number of problems are solved to show the efficiency of the method. Further, a new solution scheme for solving boundary value problems with Neumann conditions is proposed. The scheme is based on the modified Adomian decomposition method and the inverse linear operator theorem. Several differential equations with Neumann boundary conditions are solved to demonstrate the high accuracy and efficiency of the proposed scheme.
文摘In this study, the effects of magnetic field and nanoparticle on the Jeffery- Hamel flow are studied using a powerful analytical method called the Adomian decomposition method （ADM）. The traditional Navier-Stokes equation of fluid mechanics and Maxwell＇s electromagnetism governing equations are reduced to nonlinear ordinary differential equations to model the problem. The obtained results are well agreed with that of the Runge-Kutta method. The present plots confirm that the method has high accuracy for different a, Ha, and Re numbers. The flow field inside the divergent channel is studied for various values of Hartmann ：number and angle of channel. The effect of nanoparticle volume fraction in the absence of magnetic field is investigated.
文摘The study reveals analytically on the 3-dimensional viscous time-dependent gyrotactic bioconvection in swirling nanofluid flow past from a rotating disk.It is known that the deformation of the disk is along the radial direction.In addition to that Stefan blowing is considered.The Buongiorno nanofluid model is taken care of assuming the fluid to be dilute and we find Brownian motion and thermophoresis have dominant role on nanoscale unit.The primitive mass conservation equation,radial,tangential and axial momentum,heat,nano-particle concentration and micro-organism density function are developed in a cylindrical polar coordinate system with appropriate wall(disk surface)and free stream boundary conditions.This highly nonlinear,strongly coupled system of unsteady partial differential equations is normalized with the classical von Kármán and other transformations to render the boundary value problem into an ordinary differential system.The emerging 11th order system features an extensive range of dimensionless flow parameters,i.e.,disk stretching rate,Brownian motion,thermophoresis,bioconvection Lewis number,unsteadiness parameter,ordinary Lewis number,Prandtl number,mass convective Biot number,Péclet number and Stefan blowing parameter.Solutions of the system are obtained with developed semi-analytical technique,i.e.,Adomian decomposition method.Validation of the said problem is also conducted with earlier literature computed by Runge-Kutta shooting technique.
基金Supported by the National Natural Science Foundation of China(21706282,21276137,61273039,61673236)Science Foundation of China University of Petroleum,Beijing(No.2462017YJRC028)the National High-tech 863 Program of China(2013AA 040702)
文摘Refinery scheduling attracts increasing concerns in both academic and industrial communities in recent years.However, due to the complexity of refinery processes, little has been reported for success use in real world refineries. In academic studies, refinery scheduling is usually treated as an integrated, large-scale optimization problem,though such complex optimization problems are extremely difficult to solve. In this paper, we proposed a way to exploit the prior knowledge existing in refineries, and developed a decision making system to guide the scheduling process. For a real world fuel oil oriented refinery, ten adjusting process scales are predetermined. A C4.5 decision tree works based on the finished oil demand plan to classify the corresponding category(i.e. adjusting scale). Then,a specific sub-scheduling problem with respect to the determined adjusting scale is solved. The proposed strategy is demonstrated with a scheduling case originated from a real world refinery.
文摘This paper presents a comparison among Adomian decomposition method (ADM), Wavelet-Galerkin method (WGM), the fully explicit (1,7) finite difference technique (FTCS), the fully implicit (7,1) finite difference method (BTCS), (7,7) Crank-Nicholson type finite difference formula (C-N), the fully explicit method (1,13) and 9-point finite difference method, for solving parabolic differential equations with arbitrary boundary conditions and based on weak form functionals in finite domains. The problem is solved rapidly, easily and elegantly by ADM. The numerical results on a 2D transient heat conducting problem and 3D diffusion problem are used to validate the proposed ADM as an effective numerical method for solving finite domain parabolic equations. The numerical results showed that our present method is less time consuming and is easier to use than other methods. In addition, we prove the convergence of this method when it is applied to the nonlinear parabolic equation.
基金Supported by the National Natural Science Foundation of China(No.71273027 and No.71322306)
文摘The existing oil import dependence index cannot exactly measure the economic cost or scales, and it is difficult to describe the economical aspect of oil security. To measure the foreign dependence of one country's economy and reflect its oil economic security, this paper defines the net oil import intensity as the ratio of net oil import cost to GDP. By using Divisia Index Decomposition, the change of net oil import intensity in five industrialized countries and five newly industrialized countries during 1971—2010 is decomposed into five factors: oil price, oil intensity, oil self-sufficiency, domestic price level and exchange rate. The result shows that the dominating factors are oil price and oil intensity; moreover, the newly industrialized countries have higher net oil import intensity than industrialized countries.
文摘In this paper, an absorbing Fictitious Boundary Condition (FBC) is presented to generate an iterative Domain Decomposition Method (DDM) for analyzing waveguide problems.The relaxed algorithm is introduced to improve the iterative convergence. And the matrix equations are solved using the multifrontal algorithm. The resulting CPU time is greatly reduced.Finally, a number of numerical examples are given to illustrate its accuracy and efficiency.
基金Supported by the China National Science and Technology Major Project(2016ZX05050)
文摘Based on analysis of NMR T2 spectral characteristics,a new method for identifying fluid properties by decomposing T2 spectrum through signal analysis has been proposed.Because T2 spectrum satisfies lognormal distribution on transverse relaxation time axis,the T2 spectrum can be decomposed into 2 to 5 independent component spectra by fitting the T2 spectrum with Gauss functions.By analyzing the free relaxation response characteristics of crude oil and formation water,the dynamic response characteristics of the core mutual drive between oil and water,the petrophysical significance of each component spectrum is clarified.T2 spectrum can be decomposed into clay bound water component spectrum,capillary bound fluid component spectrum,micropores fluid component spectrum and macropores fluid component spectrum.According to the nature of crude oil in the target area,the distribution range of T2 component spectral peaks of oil-bearing reservoir is 165-500 ms on T2 time axis.This range can be used to accurately identify fluid properties.This method has high adaptability in identifying complex oil and water layers in low porosity and permeability reservoirs.
基金Supported by the NNSF of China(1027206710461005) the Scientific Research Foundation of Tianjin Education Committee(20050404).
文摘The aim of this paper is to apply the relatively new Adomian decomposition method to solving the system of linear fractional, in the sense of Riemann-Liouville and Caputo respectively, differential equations. The solutions are expressed in terms of Mittag-Leffier functions of matric argument. The Adomian decomposition method is straightforward, applicable for broader problems and avoids the difficulties in applying integral transforms. As the order is 1, the result here is simplified to that of first order differential equation.
基金supported by NSFC (11071039,11161130002)Natural Science Foundation of Jiangsu Province (BK2011584)
文摘Consider acoustic wave scattering by multiple obstacles with different sound properties on the boundary, which can be modeled by a mixed boundary value problem for the Helmholtz equation in frequency domain. Compared with the standard scattering problem for one obstacle, the difficulty of such a new problem is the interaction of scattered wave by different obstacles. A decomposition method for solving this multiple scattering problem is developed. Using the boundary integral equation method, we decompose the total scattered field into a sum of contributions by separated obstacles. Each contribution corresponds to scattering problem of single obstacle. However, all the single scattering problems are coupled via the boundary conditions, representing the physical interaction of scattered wave by different obstacles. We prove the feasibility of such a decomposition. To compute these contributions efficiently, an iteration algorithm of Jacobi type is proposed, decoupling the interaction of scattered wave from the numerical points of view. Under the well-separation assumptions on multiple obstacles, we prove the convergence of iteration sequence generated by the Jacobi algorithm, and give the error estimate between exact scattered wave and the iteration solution in terms of the obstacle size and the minimal distance of multiple obstacles. Such a quantitative description reveals the essences of wave scattering by multiple obstacles. Numerical examples showing the accuracy and convergence of our method are presented.
基金supported by the National Natural Science Foundation of China(Grant No.51490673)the Pre-Research Field Fund Project of the Central Military Commission of China(Grant No.61402070201)the Fundamental Research Funds for the Central Universities(Grant No.DUT18LK09)
文摘A higher-order boundary element method(HOBEM) for simulating the fully nonlinear regular wave propagation and diffraction around a fixed vertical circular cylinder is investigated. The domain decomposition method with continuity conditions enforced on the interfaces between the adjacent sub-domains is implemented for reducing the computational cost. By adjusting the algorithm of iterative procedure on the interfaces, four types of coupling strategies are established, that is, Dirchlet/Dirchlet-Neumman/Neumman(D/D-N/N), Dirchlet-Neumman(D-N),Neumman-Dirchlet(N-D) and Mixed Dirchlet-Neumman/Neumman-Dirchlet(Mixed D-N/N-D). Numerical simulations indicate that the domain decomposition methods can provide accurate results compared with that of the single domain method. According to the comparisons of computational efficiency, the D/D-N/N coupling strategy is recommended for the wave propagation problem. As for the wave-body interaction problem, the Mixed D-N/N-D coupling strategy can obtain the highest computational efficiency.
基金Project supported by the National Key Basic Research Project of China (Grant No 2004CB318000)the National Natural Science Foundation of China (Grant Nos 10771072 and 10735030)Shanghai Leading Academic Discipline Project of China (Grant No B412)
文摘The Adomian decomposition method （ADM） and Pade approximants are combined to solve the well-known Blaszak-Marciniak lattice, which has rich mathematical structures and many important applications in physics and mathematics. In some cases, the truncated series solution of ADM is adequate only in a small region when the exact solution is not reached. To overcome the drawback, the Pade approximants, which have the advantage in turning the polynomials approximation into a rational function, are applied to the series solution to improve the accuracy and enlarge the convergence domain. By using the ADM-Pade technique, the soliton solutions of the Blaszak-Marciniak lattice are constructed with better accuracy and better convergence than by using the ADM alone. Numerical and figurative illustrations show that it is a promising tool for solving nonlinear problems.
基金supported by the National Natural Science Foundation of China under Grant No. 10735030Shanghai Leading Academic Discipline Project under Grant No. B412Program for Changjiang Scholars and Innovative Research Team in University under Grant No. IRT0734
文摘Combining Adomian decomposition method （ADM） with Pade approximants, we solve two differentiaidifference equations （DDEs）： the relativistic Toda lattice equation and the modified Volterra lattice equation. With the help of symbolic computation Maple, the results obtained by ADM-Pade technique are compared with those obtained by using ADM alone. The numerical results demonstrate that ADM-Pade technique give the approximate solution with faster convergence rate and higher accuracy and relative in larger domain of convergence than using ADM.
基金supported by National Natural Science Foundation of China under Grant No. 10672147
文摘In this paper, exact and numerical solutions are calculated for discrete complex Ginzburg-Landau equation with initial condition by considering the modified Adomian decomposition method （mADM）, which is an efficient method and does not need linearization, weak nonlinearity assumptions or perturbation theory. The numerical solutions are also compared with their corresponding analytical solutions. It is shown that a very good approximation is achieved with the analytical solutions. Finally, the modulational instability is investigated and the corresponding condition is given.
文摘The present paper is devoted to the convergence control and accelerating the traditional Decomposition Methodof Adomian (ADM). By means of perturbing the initial or early terms of the Adomian iterates by adding aparameterized term, containing an embedded parameter, new modified ADM is constructed. The optimal value ofthis parameter is later determined via squared residual minimizing the error. The failure of the classical ADM is alsoprevented by a suitable value of the embedded parameter, particularly beneficial for the Duan–Rach modification ofthe ADM incorporating all the boundaries into the formulation. With the presented squared residual error analysis,there is no need to check out the results against the numerical ones, as usually has to be done in the traditional ADMstudies to convince the readers that the results are indeed converged to the realistic solutions. Physical examplesselected from the recent application of ADM demonstrate the validity, accuracy and power of the presented novelapproach in this paper. Hence, the highly nonlinear equations arising from engineering applications can be safelytreated by the outlined method for which the classical ADM may fail or be slow to converge.
