A new adsorbent (JN-01) was prepared by modifying resin NDA-1800 with nitro functional groups.The adsorption capacities of resins XAD-4,NDA-1800 and JN-01 were investigated,and the results indicated that the modified ...A new adsorbent (JN-01) was prepared by modifying resin NDA-1800 with nitro functional groups.The adsorption capacities of resins XAD-4,NDA-1800 and JN-01 were investigated,and the results indicated that the modified resin JN-01 was much better in adsorbing phenol,p-nitrophenol and p-cresol.The adsorption capacities of the resin JN-01 were higher than those of the resins XAD-4 and NDA-1800 within a temperature range of 283-323 K,which might be attributed to the higher surface area and the partial polarity o...展开更多
In order to reduce the curing temperature, shorten the curing time of phenol-formaldehyde(PF) resin adhesive, and ensure the good water-solubility, NaOH and Ba(OH)_2 were used as compound catalysts. The influences of ...In order to reduce the curing temperature, shorten the curing time of phenol-formaldehyde(PF) resin adhesive, and ensure the good water-solubility, NaOH and Ba(OH)_2 were used as compound catalysts. The influences of the adding time of Ba(OH)_2, the adding amount of NaOH, Ba(OH)_2 and resorcinol on the properties of adhesives were studied. The properties of NaOH catalyzed phenol-formaldehyde(PF) adhesive, NaOH and Ba(OH)_2 compound catalyzed PF adhesive, NaOH and Ba(OH)_2 compound catalyzed phenol-resorcinol-formaldehyde(PRF) adhesive, and the prepared recombinant bamboo with three kinds of adhesives were compared. The experimental results show that NaOH and Ba(OH)_2 compound catalyst not only shortens the curing time of PF adhesive, but also guarantees the suitable water solubility of adhesive. After copolycondensation with resorcinol, the curing time of adhesive is further shortened, the water solubility is improved obviously, and the highest bonding strength is obtained. Infrared spectrum analysis shows that the reaction activity point of NaOH and Ba(OH)_2 compound catalyzed PRF adhesive will increase, so that both the curing temperature and curing enthalpy decrease.展开更多
In many sources of volatile organic compounds (VOCs), large amounts of water vapor come from the air and the reactors. The relative humidity (RH) of exhaust gas is normally >60% and is supersaturated. Maintaining t...In many sources of volatile organic compounds (VOCs), large amounts of water vapor come from the air and the reactors. The relative humidity (RH) of exhaust gas is normally >60% and is supersaturated. Maintaining the property of adsorbent on VOCs in a highly humid gas stream is a serious industrial problem. In this study, the adsorption/desorption behavior of toluene in a micro-mesoporous polymeric resin was investigated in a highly humid environment to explore the influence of abound water vapor on resin adsorption and regeneration. This resin could selectively adsorb toluene at an RH of 80%, and its adsorption property was unaffected by the presence of water vapor. In the case of humidity saturation, the resin displayed a high adsorption capacity at a moisture content of <30%. Therefore, the polymer resin is an excellent water-resistant adsorbent of VOCs. In the regenerative experiment, the resin maintained its original adsorption capability after four adsorption/ desorption cycles of toluene purging with nitrogen gas at 120℃. The resin exhibited excellent regeneration performance at high humidity.展开更多
Equilibrium data for the adsorption of phenolic compounds, i.e., phenol, p-cresol, p-chlorophenol and p- nitrophenol from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent (NJ-8) within temp...Equilibrium data for the adsorption of phenolic compounds, i.e., phenol, p-cresol, p-chlorophenol and p- nitrophenol from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent (NJ-8) within temperature range of 283-323 K were obtained and correlated with a Freundlich-type of isotherm equation, so that equilibrium constants KF and n were obtained. The capacities of equilibrium adsorption for all the four phenolic compounds on the NJ-8 from aqueous solutions are around 2 times as high as those of Amberlite XAD-4, which may be attributed to the unusual micropore structure and the partial polarity on the network. The values of the enthalpy (always negative) are indicative of an exothermic process, which manifests the adsorption of all the four phenolic compounds on the two polymeric adsorbents to be a process of physical adsorption. The negative values of free energy change show that the solute is more concentrated on the adsorbent than in the bulk solution. The absolute free energy values of adsorption for NJ-8 are always higher than those for Amberlite XAD-4, which indicates that phenolic compounds are preferentially adsorbed on NJ-8. The negative values of the adsorption entropy are consistent with the restricted mobilities of adsorbed molecules of phenolic compounds as compared with the molecules in solution. The adsorption entropy values of phenolic compounds for NJ-8 are lower than those for Amberlite XAD-4, which means the micropores of NJ-8 require more orderly arranged adsorbate.展开更多
Natural dissolved organic carbon (DOC) consists of different bio-molecular classes of compounds that are currently very difficult and time-consuming to isolate as individual compounds. However, it is possible to separ...Natural dissolved organic carbon (DOC) consists of different bio-molecular classes of compounds that are currently very difficult and time-consuming to isolate as individual compounds. However, it is possible to separate natural DOC into hydrophobic and hydrophilic fractions. Such characterisation approaches are becoming increasingly important because, over the past 20 years natural DOC concentrations have been rising rapidly in many parts of the world, most likely influenced by climate change. Higher DOC concentrations in drinking water catchments present a serious problem for the water industry because DOC can form disinfection by-products DBPs during water treatment (e.g. chlorination). Hence, there is an urgent need to better characterise natural DOC before, during and after water treatment. However, current DOC fractionation procedures are extremely laborious requiring days and continual manual monitoring to separate sufficient quantities of DOC for subsequent analysis. This seriously limits sample throughput and the parameter space which can be studied. In this paper, we propose a much more rapid semi-automated method (12.5 hours/litre/sample) which utilises readily available equipment, i.e., HPLC pump or similar and sequential columns of Amberlite DAX 8 and XAD 4 resins. The method reduces the manual input from continual attention to minutes. This paper describes the development of the method and its application in the fractionation of natural DOC from reservoir and lake samples fed from upland peat-land catchments. Recoveries are found to be comparable to those using the manual technique, with the dominant component being hydrophobic acid accounting for 35% - 40% of the natural DOC with the second largest, being hydrophilic acid at 20% - 27%.展开更多
本文开展了有机硅改性酚醛树脂复合材料制备及性能研究。首先进行有机硅改性酚醛树脂复合材料的制备:将4 g甲基苯基二甲氧基硅烷溶于25 m L四甲基氢氧化铵中,然后将得到的料液添至去离子水中进行搅拌,得到黄色固体,并将其置于60℃烘箱中...本文开展了有机硅改性酚醛树脂复合材料制备及性能研究。首先进行有机硅改性酚醛树脂复合材料的制备:将4 g甲基苯基二甲氧基硅烷溶于25 m L四甲基氢氧化铵中,然后将得到的料液添至去离子水中进行搅拌,得到黄色固体,并将其置于60℃烘箱中,设置时间24 h,得出有机硅改性酚醛树脂复合材料。再者,对有机硅改性酚醛树脂复合材料的热性能及复合材料层间剪切强度进行测试。研究结果表明:当固化环氧树脂和固化剂质量比为95∶5时,有机硅改性酚醛树脂复合材料性能最优,此时其层间剪切强度高达87.5 MPa,热失重质量为0.22 g,耐热性能更好。展开更多
基金supported by the National Nature Science Fund (No.50778088)Resources Special Subject of National High Technology Research & Development Project (863 Project No.2006AA06Z383),China.
文摘A new adsorbent (JN-01) was prepared by modifying resin NDA-1800 with nitro functional groups.The adsorption capacities of resins XAD-4,NDA-1800 and JN-01 were investigated,and the results indicated that the modified resin JN-01 was much better in adsorbing phenol,p-nitrophenol and p-cresol.The adsorption capacities of the resin JN-01 were higher than those of the resins XAD-4 and NDA-1800 within a temperature range of 283-323 K,which might be attributed to the higher surface area and the partial polarity o...
基金Funded by the China Postdoctoral Science Foundation Funded Project(2015M572276)the Natural Science Foundation of Hunan Province,China(2016JJ3184)the Hunan Major Science and Technology Projects(2011FJ1006)
文摘In order to reduce the curing temperature, shorten the curing time of phenol-formaldehyde(PF) resin adhesive, and ensure the good water-solubility, NaOH and Ba(OH)_2 were used as compound catalysts. The influences of the adding time of Ba(OH)_2, the adding amount of NaOH, Ba(OH)_2 and resorcinol on the properties of adhesives were studied. The properties of NaOH catalyzed phenol-formaldehyde(PF) adhesive, NaOH and Ba(OH)_2 compound catalyzed PF adhesive, NaOH and Ba(OH)_2 compound catalyzed phenol-resorcinol-formaldehyde(PRF) adhesive, and the prepared recombinant bamboo with three kinds of adhesives were compared. The experimental results show that NaOH and Ba(OH)_2 compound catalyst not only shortens the curing time of PF adhesive, but also guarantees the suitable water solubility of adhesive. After copolycondensation with resorcinol, the curing time of adhesive is further shortened, the water solubility is improved obviously, and the highest bonding strength is obtained. Infrared spectrum analysis shows that the reaction activity point of NaOH and Ba(OH)_2 compound catalyzed PRF adhesive will increase, so that both the curing temperature and curing enthalpy decrease.
文摘In many sources of volatile organic compounds (VOCs), large amounts of water vapor come from the air and the reactors. The relative humidity (RH) of exhaust gas is normally >60% and is supersaturated. Maintaining the property of adsorbent on VOCs in a highly humid gas stream is a serious industrial problem. In this study, the adsorption/desorption behavior of toluene in a micro-mesoporous polymeric resin was investigated in a highly humid environment to explore the influence of abound water vapor on resin adsorption and regeneration. This resin could selectively adsorb toluene at an RH of 80%, and its adsorption property was unaffected by the presence of water vapor. In the case of humidity saturation, the resin displayed a high adsorption capacity at a moisture content of <30%. Therefore, the polymer resin is an excellent water-resistant adsorbent of VOCs. In the regenerative experiment, the resin maintained its original adsorption capability after four adsorption/ desorption cycles of toluene purging with nitrogen gas at 120℃. The resin exhibited excellent regeneration performance at high humidity.
基金This work was financially supported by the National Natural Science Foundation of China (Grant No. 20274017) and theScience & Technology Council of Jiangsu province, China (Grant No. BK2000016)
文摘Equilibrium data for the adsorption of phenolic compounds, i.e., phenol, p-cresol, p-chlorophenol and p- nitrophenol from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent (NJ-8) within temperature range of 283-323 K were obtained and correlated with a Freundlich-type of isotherm equation, so that equilibrium constants KF and n were obtained. The capacities of equilibrium adsorption for all the four phenolic compounds on the NJ-8 from aqueous solutions are around 2 times as high as those of Amberlite XAD-4, which may be attributed to the unusual micropore structure and the partial polarity on the network. The values of the enthalpy (always negative) are indicative of an exothermic process, which manifests the adsorption of all the four phenolic compounds on the two polymeric adsorbents to be a process of physical adsorption. The negative values of free energy change show that the solute is more concentrated on the adsorbent than in the bulk solution. The absolute free energy values of adsorption for NJ-8 are always higher than those for Amberlite XAD-4, which indicates that phenolic compounds are preferentially adsorbed on NJ-8. The negative values of the adsorption entropy are consistent with the restricted mobilities of adsorbed molecules of phenolic compounds as compared with the molecules in solution. The adsorption entropy values of phenolic compounds for NJ-8 are lower than those for Amberlite XAD-4, which means the micropores of NJ-8 require more orderly arranged adsorbate.
文摘Natural dissolved organic carbon (DOC) consists of different bio-molecular classes of compounds that are currently very difficult and time-consuming to isolate as individual compounds. However, it is possible to separate natural DOC into hydrophobic and hydrophilic fractions. Such characterisation approaches are becoming increasingly important because, over the past 20 years natural DOC concentrations have been rising rapidly in many parts of the world, most likely influenced by climate change. Higher DOC concentrations in drinking water catchments present a serious problem for the water industry because DOC can form disinfection by-products DBPs during water treatment (e.g. chlorination). Hence, there is an urgent need to better characterise natural DOC before, during and after water treatment. However, current DOC fractionation procedures are extremely laborious requiring days and continual manual monitoring to separate sufficient quantities of DOC for subsequent analysis. This seriously limits sample throughput and the parameter space which can be studied. In this paper, we propose a much more rapid semi-automated method (12.5 hours/litre/sample) which utilises readily available equipment, i.e., HPLC pump or similar and sequential columns of Amberlite DAX 8 and XAD 4 resins. The method reduces the manual input from continual attention to minutes. This paper describes the development of the method and its application in the fractionation of natural DOC from reservoir and lake samples fed from upland peat-land catchments. Recoveries are found to be comparable to those using the manual technique, with the dominant component being hydrophobic acid accounting for 35% - 40% of the natural DOC with the second largest, being hydrophilic acid at 20% - 27%.
