For long-distance water conveyance shield tunnels in operation,the high internal water pressure may cause excessive deformation of composite linings,affecting their structural integrity and serviceability.However,the ...For long-distance water conveyance shield tunnels in operation,the high internal water pressure may cause excessive deformation of composite linings,affecting their structural integrity and serviceability.However,the deformation and failure characteristics of lining structures under internal water pressure are not well investigated in the literature,particularly for three-layer composite linings.This study presents an in situ experimental investigation on the response of two types of composite linings(i.e.separated and combined lining structures)subjected to internal pressures,in which a fiber optic nerve system(FONS)equipped with distributed strain and displacement sensing nerves was employed to monitor the performance of the two composite linings during testing.The experimental results clearly show that the damage of the tunnel lining under different internal pressures was mainly located in the self-compaction concrete layer.The separated lining structure responded more aggressively to the variations in internal pressures than the combined one.Moreover,two evaluation indices,i.e.radial displacement and effective stiffness coefficient,are proposed for describing the changes in the structural bearing performance.The effective stiffness coefficients of the two types of lining structures were reduced by 39.4%and 29.5%,respectively.Considering the convenience of field monitoring,it is suggested that the average strains at different layers can be used as characteristic parameters for estimating the health conditions of lining structures in service.The analysis results provide a practical reference for the design and health evaluation of water conveyance shield tunnels with composite linings.展开更多
Currently,model tests are increasingly being used to simulate the construction of mountain tunnels,but the support structure of the model tests does not show the composite lining,and the force laws of the composite li...Currently,model tests are increasingly being used to simulate the construction of mountain tunnels,but the support structure of the model tests does not show the composite lining,and the force laws of the composite lining are not yet clear.In this research,the force variation of composite lining under three cases in model tests of deep-buried tunnels were carried out with the surrounding rock grade and installation time as the variation factors.The test results reveal that:(1)The suitable method to reduce the contact load between the secondary lining and primary support is to enhance the primary support in the soft and weak surrounding rock.Correspondingly,for ClassⅢsurrounding rock and better quality of surrounding rock,the primary support can lag behind the excavation face a certain distance.(2)The axial forces of the bolts tend to rise with concentration of 0.4 kN-0.7 kN after the secondary lining was installed.(3)With or without two to three excavation cycles delayed,the load sharing ratio of the secondary lining of the Class III surrounding rock is less than 10%.Finally,the numerical simulation verifies the feasibility of the model tests.展开更多
To reduce the burning loss and the spalling and to improve energy efficiency,the mullite composite lining plates were used to replace cast steel or alloy lining in rotary coke tanks for coke dry quenching equipment.Th...To reduce the burning loss and the spalling and to improve energy efficiency,the mullite composite lining plates were used to replace cast steel or alloy lining in rotary coke tanks for coke dry quenching equipment.The results show that:the dense mullite composite lining plate in the cone part has the density of 2.20 g·cm^(-3) and the wear test,s volume loss of 4.08 cm^(3),and the light weight mullite composite lining plate in the straight cylinder part has the density of 1.95 g·cm^(-3) and the wear test,s volume loss of 17.6 cm^(3).After using,there is no shrinkage gap,no burn loss or holes in the plates,indicating good sealing of the mullite composite lining plates.The lining plate for the cone part has low burning loss,without spalling for more than half a year.The outer surface temperature of coke tanks adopting the cast steel or the alloy lining is 480 to 570℃,while that of the ones adopting mullite composite lining plates is 120 to 170℃,showing a largely improved insulating property.Adopting mullite composite lining plates on the basis of the current coke tank cage,the lining plates can be timely treated and wholly replaced,improving the service life and reducing the maintenance workload.展开更多
A new approach was introduced to analyze composite right/left-handed transmission lines （CRLH TLs）. The Bloch impedance and the dispersion relations are directly obtained from the S parameters of the unit cells. The...A new approach was introduced to analyze composite right/left-handed transmission lines （CRLH TLs）. The Bloch impedance and the dispersion relations are directly obtained from the S parameters of the unit cells. The LH and RH frequency bands are then identified by the real parts of the Bloch impedance and the phase delay of the unit cells. The new approach has some advantages over the LC parameters extraction method introduced by Caloz et a1.（2004）. Based on the new approach, a novel resonator is designed using CRLH TLs. The simulation and experimental results accorded well with the theoretical analysis. The novel resonator may have potential applications in filters with high harmonic suppression and compact structures,展开更多
A dual structure of composite right/left handed (CRLH) transmission line (TL) is analyzed in which an inductance LR is in parallel with a capacitance CL and a shunt capacitance CR is in series with an inductance LL. B...A dual structure of composite right/left handed (CRLH) transmission line (TL) is analyzed in which an inductance LR is in parallel with a capacitance CL and a shunt capacitance CR is in series with an inductance LL. Both the distributed and lumped cases are considered. The dispersion diagram and transmission properties of the dual CRLH TL are given and compared with those of a standard CRLH TL. Contrary to the frequency response of a standard CRLH TL, a dual CRLH TL has a left-handed (negative phase shift) band at higher frequencies and a right-handed (positive phase shift) band at lower frequencies. A novel dual-band balun is presented as an application.展开更多
The refraction index of the quantized lossy composite right-left handed transmission line（CRLH-TL） is deduced in the thermal coherence state. The results show that the negative refraction index（herein the left-hand...The refraction index of the quantized lossy composite right-left handed transmission line（CRLH-TL） is deduced in the thermal coherence state. The results show that the negative refraction index（herein the left-handedness） can be implemented by the electric circuit dissipative factors（i.e., the resistances R and conductances G） in a higher frequency band（1.446 GHz≤ ω ≤ 15 GHz）, and flexibly adjusted by the left-handed circuit components（Cl, Ll） and the right-handed circuit components（Cr, Lr） at a lower frequency（ω = 0.995 GHz）. The flexible adjustment for left-handedness in a wider bandwidth will be significant for the microscale circuit design of the CRLH-TL and may make the theoretical preparation for its compact applications.展开更多
In order to solve the problem of large deformation at the intersection of deep large section soft rock roadway,this paper takes the intersection of kilometer-deep roadway in the Wanfu Coal Mine as an engineering examp...In order to solve the problem of large deformation at the intersection of deep large section soft rock roadway,this paper takes the intersection of kilometer-deep roadway in the Wanfu Coal Mine as an engineering example and applies Negative Poisson’s Ratio(NPR)steel anchor cable in roadway support for the first time.By combining numerical simulation indoor test,theoretical analysis and field test,the deformation mechanism of surrounding rock at the intersection of deep-buried roadway was analyzed,and the control strategy with micro NPR steel anchor cable as the core was put forward.Through numerical simulation,the numerical analysis model of roadway intersection with different intersection angles and excavation sequence was constructed,and the impact of two key variables of rake angle and excavation sequence on the stability of surrounding rock at roadway intersection was studied.The optimal dip angle is 90°and the optimal excavation sequence was determined as pump house-pump house passage-substation.The mechanical properties of the micro-NPR steel anchor cable were studied through the static tensile test in the laboratory.The results showed that the micro-NPR steel anchor cable showed high constant resistance,uniform tensile,no yield platform,and no obvious necking phenomenon during breaking.Through theoretical derivation,it was calculated that the vertical stress of roadway intersection is 45 MPa,and the bearing capacity of superposed arch composed of micro NPR steel anchor cable is 1257 kN,which is enough to guarantee the overall stability of intersection.Support application test and monitoring were carried out on site,and it was verified that the combined support strategy of short and long micro NPR steel anchor cable has a good control effect on large deformation of surrounding rock at intersection,which provides a new support material and support means for the safety and stabilization control of surrounding rock at intersection.展开更多
Based on the analyses of the structural feature and the function requirements of newstyle bottle cap, the two fundamental components, the lining washer and the outer body, are abstracted as a plate and a cylinder with...Based on the analyses of the structural feature and the function requirements of newstyle bottle cap, the two fundamental components, the lining washer and the outer body, are abstracted as a plate and a cylinder with thin wall respectively. For simulating the deformation of the lining washer under equiaxial pressure, the modified Lagrangian finite element analysis is applied on the 228 triangular elements. Under assembly pressure, the plastoelastic deformation of both the lining washer and the outer body are studied in terms of Tresca＇s yield criterion and the limitation of the plastic deformation is presented when the two components are assembled into one unit. For the production of this kind of bottle cover, experiments are carried out by carefully measuring the changes of the diameter of lining washer as well as that of the outer body. It is shown that results from the experiments have a good agreement with the theoretical calculation and the maximum value of the allowable pressure has successfully been used in the design of newly developed bottle cap production system.展开更多
The nonlinear properties of lattice network-based（LNB） composite right-/left-handed transmission lines（CRLH TLs）with nonlinear capacitors are experimentally investigated.Harmonic generation,subharmonic generation,...The nonlinear properties of lattice network-based（LNB） composite right-/left-handed transmission lines（CRLH TLs）with nonlinear capacitors are experimentally investigated.Harmonic generation,subharmonic generation,and parametric excitation are clearly observed in an unbalanced LNB CRLH TL separately.While the balanced design of the novel nonlinear TL shows that the subharmonic generation and parametric processes can be suppressed,and almost the same power level of the higher harmonics can be achieved over a wide bandwidth range,which are difficult to find in conventional CRLH TLs.展开更多
A quasi 0-dB coupler composed of a composite right-/left-handed transmission line (CRLH TL) and a conventional right-handed transmission line (RH TL) is presented. This coupler is shown to exhibit broad bandwidth and ...A quasi 0-dB coupler composed of a composite right-/left-handed transmission line (CRLH TL) and a conventional right-handed transmission line (RH TL) is presented. This coupler is shown to exhibit broad bandwidth and tight coupling char- acteristics. The circuit model and S-parameter results are also demonstrated. Another coupler with properly chosen loaded lumped-elements LL and CL in the CRLH TL is proposed to gain further understanding of the coupling mechanism. By adjusting the spacing between the CRLH TL and RH TL from 8 mm to 0.2 mm, it can be shown that backward coupling occurs in the left-handed region.展开更多
This paper proposes a tunable zeroth-order resonator on a composite right/left-handed transmission line consisting of a transversely magnetized ferrite substrate periodically loaded by microstrip inductors. Based on t...This paper proposes a tunable zeroth-order resonator on a composite right/left-handed transmission line consisting of a transversely magnetized ferrite substrate periodically loaded by microstrip inductors. Based on the propagation theory of edge guided modes, the analysis procedure of this structure is introduced. The numerical results demonstrate the tunability of the resonant frequency by changing the DC bias magnetic field applied to the ferrite. In contrast to previous work, the proposed structure is easy to design and fabricate and does not require a chip component.展开更多
A bandwidth microwave second harmonic generator is successfully designed using composite right/left-handed non- linear transmission lines （CRLH NLTLs） in a GaAs monolithic microwave integrated circuit （MMIC） techn...A bandwidth microwave second harmonic generator is successfully designed using composite right/left-handed non- linear transmission lines （CRLH NLTLs） in a GaAs monolithic microwave integrated circuit （MMIC） technology. The structure parameters of CRLH NLTLs, e.g. host transmission line, rectangular spiral inductor, and nonlinear capacitor, have a great impact on the second harmonic performance enhancement in terms of second harmonic frequency, output power, and conversion efficiency. It has been experimentally demonstrated that the second harmonic frequency is deter- mined by the anomalous dispersion of CRLH NLTLs and can be significantly improved by effectively adjusting these structure parameters. A good agreement between the measured and simulated second harmonic performances of Ka-band CRLH NLTLs frequency multipliers is successfully achieved, which further validates the design approach of frequency multipliers on CRLH NLTLs and indicates the potentials of CRLH NLTLs in terms of the generation of microwave and millimeter-wave signal source.展开更多
A compact multiband patch antenna is designed by using HFSS in this work, which is filled with composite right/left-handed transmission line （CRLH-TL） structures. The simulated results reveal that the operating freq...A compact multiband patch antenna is designed by using HFSS in this work, which is filled with composite right/left-handed transmission line （CRLH-TL） structures. The simulated results reveal that the operating frequency becomes lower with left-handed （LH） characteristics of the CRLH-TL structures enhanced, which enable antenna physical size reduction to a large extent. The proposed antenna is fabricated on the substrate Rogers R03201 （relative permittivity of 10.2）, which has a compact size of 12 mm×12 mm × 4 mm. Moreover, this antenna exhibits monopole-like radiation pattern at one resonance frequency and patch-like radiation at the other four resonant frequencies. Therefore, the designed antenna is useful for communication systems.展开更多
Aiming at the characteristics of obvious block division and strong discreteness in the assembly production mode of electronic products,this paper proposes a composite U-shaped flexible assembly line model,and establis...Aiming at the characteristics of obvious block division and strong discreteness in the assembly production mode of electronic products,this paper proposes a composite U-shaped flexible assembly line model,and establishes a multi-objective optimization mathematical model on this basis.According to the characteristics of the model,the improved ranked positional weight(RPW)method is used to adjust the generation process of the initial solution of the genetic algorithm,so that the genetic algorithm can be applied to the block task model.At the same time,the adaptive cross mutation factor is used on the premise that tasks between different blocks are not crossed during cross mutation,which effectively improves the probability of excellent individuals retaining.After that,the algorithm is used to iterate to obtain the optimal solution task assignment.Finally,the algorithm results are compared with actual production data,which verifies the validity and feasibility of the assembly line model for discrete production mode proposed in this paper.展开更多
This paper presents a numerical investigation of the mechanical behaviour of segmental linings owing to the existence of voids in the composite lining.The composite lining was formed by mining outside and shield tunne...This paper presents a numerical investigation of the mechanical behaviour of segmental linings owing to the existence of voids in the composite lining.The composite lining was formed by mining outside and shield tunnelling inside with backfill in between.Finite element method was conducted to analyse the axial forces and bending moment for voids of different diameters at different positions.The results show that the axial forces in the transverse section increase near the crown and then invert and decrease on the left and right sides with an increase in the void centre angle(β)measured from the vertical axis.The increase in void diameter(d<300 mm)induces an increase in the axial force on the left and right sides when β=45°and 90°,while it decreases near the crown and invert.The occurrence of voids leads to an increase in the bending moment in the entire segment section with an angle β.展开更多
Spray-applied membranes for waterproofing of sprayed concrete tunnels have led to the possibility of shear transfer between primary and secondary linings through the membrane interface,with the potential for reducing o...Spray-applied membranes for waterproofing of sprayed concrete tunnels have led to the possibility of shear transfer between primary and secondary linings through the membrane interface,with the potential for reducing overall lining thickness.Laboratory tests have shown a reasonable degree of composite action in beam specimens.In this study,a numerical model previously calibrated against such tests is applied to a whole tunnel,considering soil–structure interaction and staged lining construction.The model shows composite action,and load sharing between the lining layers is expected in the tunnel as in the beams.Parametric studies over the practical range of interface stiffness values show that composite action is maintained,although at high interface stiffness,excessive bending may be imposed on the secondary lining,requiring additional reinforcement.An effcient composite shell design with minimal additional rein-forcement is achievable if the secondary lining thickness is reduced as compared to current practice.Robustness of the system,measured in terms of the interface’s ability to transfer stress under unequal loading causing distortion on the tunnel,is found to be generally ade-quate.However,adjacent construction in close proximity may provide insuffcient margin on membrane tensile de-bonding,particularly if the membrane is partially or fully saturated.展开更多
In this paper,novel dual-band (DB) branch-line couplers (BLCs) employing a composite right/left handed transmission line (CRLH TL) and fractal geometry are presented for the first time.The CRLH TL,with specified chara...In this paper,novel dual-band (DB) branch-line couplers (BLCs) employing a composite right/left handed transmission line (CRLH TL) and fractal geometry are presented for the first time.The CRLH TL,with specified characteristic impedance and phase shift,consists of lumped elements for the left handed (LH) part and fractal-shaped microstrip lines (MLs) for the right handed (RH) part,which can be designed separately.Two designed BLCs are involved in size reduction,one using a 3/2 fractal curve of first iteration,the other constructed based on a hybrid shape of fractal and meandered lines.A miniaturized principle for CRLH TL realization is derived and an exact design method for fractal implementation is developed.For verification,an example coupler was fabricated and measured.Consistent numerical and experimental results confirmed the design concept,showing that the BLCs obtain DB behavior centered at 0.9 GHz and 1.8 GHz respectively with good in-band performance,except for slightly larger coupled insertion loss for the hybrid-shaped BLC case.In addition,the proposed fractal-and hybrid-shaped BLCs obtained a 49.7% and 64.1% size reduction respectively relative to their conventional counterparts working in the lower band.The most important contributions of this article are the demonstration of compatibility between the fractal and CRLH TL techniques and the provision of an alternative approach and a new concept for designing devices.展开更多
A wideband composite right/left handed transmission line (CRLH TL) in conjunction with its corresponding equivalent circuit model is studied based on a cascaded complementary single split ring resonator (CCSSRR).The c...A wideband composite right/left handed transmission line (CRLH TL) in conjunction with its corresponding equivalent circuit model is studied based on a cascaded complementary single split ring resonator (CCSSRR).The characterization is performed by theory analysis,circuit simulation,and full-wave electromagnetic (EM) simulation.The negative refractive index (NRI) and backward wave propagation performance of the CRLH TL are demonstrated.For application,a bandpass filter (BPF) with enhanced out-of-band selectivity and harmonic suppression operating at the wireless local area network (WLAN) band is designed,fabricated,and measured by combining the CRLH TL with a complementary electric inductive-capacitive resonator (CELC).Three CELC cells with wideband stopband performance in the conductor strip and ground plane,respectively,are utilized in terms of single negative permeability.The design concept has been verified by the measurement data.展开更多
基金This work was financially supported by the National Natural Science Foundation of China(Grant Nos.42225702 and 42077235)the Postgraduate Research&Practice Innovation Program of Jiangsu Province,China(Grant No.KYCX22_0162)the scientific research project of Guangdong Yue Hai Pearl River Delta Water Supply Co.,Ltd.The authors thank Guangqing Wei,Lixiang Jia,and Zhen Zhang,all of Suzhou Nanzee Sensing Co.,Ltd.,for their assistance in the tests.The valuable suggestions provided by Professor Baojun Wang,Nanjing University,are also gratefully acknowledged.
文摘For long-distance water conveyance shield tunnels in operation,the high internal water pressure may cause excessive deformation of composite linings,affecting their structural integrity and serviceability.However,the deformation and failure characteristics of lining structures under internal water pressure are not well investigated in the literature,particularly for three-layer composite linings.This study presents an in situ experimental investigation on the response of two types of composite linings(i.e.separated and combined lining structures)subjected to internal pressures,in which a fiber optic nerve system(FONS)equipped with distributed strain and displacement sensing nerves was employed to monitor the performance of the two composite linings during testing.The experimental results clearly show that the damage of the tunnel lining under different internal pressures was mainly located in the self-compaction concrete layer.The separated lining structure responded more aggressively to the variations in internal pressures than the combined one.Moreover,two evaluation indices,i.e.radial displacement and effective stiffness coefficient,are proposed for describing the changes in the structural bearing performance.The effective stiffness coefficients of the two types of lining structures were reduced by 39.4%and 29.5%,respectively.Considering the convenience of field monitoring,it is suggested that the average strains at different layers can be used as characteristic parameters for estimating the health conditions of lining structures in service.The analysis results provide a practical reference for the design and health evaluation of water conveyance shield tunnels with composite linings.
基金the Scientific Research Project of Zhejiang Provincial Transportation Department(2021050)for the preparation of this manuscript。
文摘Currently,model tests are increasingly being used to simulate the construction of mountain tunnels,but the support structure of the model tests does not show the composite lining,and the force laws of the composite lining are not yet clear.In this research,the force variation of composite lining under three cases in model tests of deep-buried tunnels were carried out with the surrounding rock grade and installation time as the variation factors.The test results reveal that:(1)The suitable method to reduce the contact load between the secondary lining and primary support is to enhance the primary support in the soft and weak surrounding rock.Correspondingly,for ClassⅢsurrounding rock and better quality of surrounding rock,the primary support can lag behind the excavation face a certain distance.(2)The axial forces of the bolts tend to rise with concentration of 0.4 kN-0.7 kN after the secondary lining was installed.(3)With or without two to three excavation cycles delayed,the load sharing ratio of the secondary lining of the Class III surrounding rock is less than 10%.Finally,the numerical simulation verifies the feasibility of the model tests.
文摘To reduce the burning loss and the spalling and to improve energy efficiency,the mullite composite lining plates were used to replace cast steel or alloy lining in rotary coke tanks for coke dry quenching equipment.The results show that:the dense mullite composite lining plate in the cone part has the density of 2.20 g·cm^(-3) and the wear test,s volume loss of 4.08 cm^(3),and the light weight mullite composite lining plate in the straight cylinder part has the density of 1.95 g·cm^(-3) and the wear test,s volume loss of 17.6 cm^(3).After using,there is no shrinkage gap,no burn loss or holes in the plates,indicating good sealing of the mullite composite lining plates.The lining plate for the cone part has low burning loss,without spalling for more than half a year.The outer surface temperature of coke tanks adopting the cast steel or the alloy lining is 480 to 570℃,while that of the ones adopting mullite composite lining plates is 120 to 170℃,showing a largely improved insulating property.Adopting mullite composite lining plates on the basis of the current coke tank cage,the lining plates can be timely treated and wholly replaced,improving the service life and reducing the maintenance workload.
基金Project supported by the National Basic Research Program (973) of China (No. 2004CB719800) and the National Natural Science Foundation of China (Nos. 60271027 and 60501018)
文摘A new approach was introduced to analyze composite right/left-handed transmission lines （CRLH TLs）. The Bloch impedance and the dispersion relations are directly obtained from the S parameters of the unit cells. The LH and RH frequency bands are then identified by the real parts of the Bloch impedance and the phase delay of the unit cells. The new approach has some advantages over the LC parameters extraction method introduced by Caloz et a1.（2004）. Based on the new approach, a novel resonator is designed using CRLH TLs. The simulation and experimental results accorded well with the theoretical analysis. The novel resonator may have potential applications in filters with high harmonic suppression and compact structures,
基金Project supported by the National Basic Research Program (973) of China (No. 2004CB719802), and the Science and Technology De-partment of Zhejiang Province (No. 2005C31004), China
文摘A dual structure of composite right/left handed (CRLH) transmission line (TL) is analyzed in which an inductance LR is in parallel with a capacitance CL and a shunt capacitance CR is in series with an inductance LL. Both the distributed and lumped cases are considered. The dispersion diagram and transmission properties of the dual CRLH TL are given and compared with those of a standard CRLH TL. Contrary to the frequency response of a standard CRLH TL, a dual CRLH TL has a left-handed (negative phase shift) band at higher frequencies and a right-handed (positive phase shift) band at lower frequencies. A novel dual-band balun is presented as an application.
基金supported by the National Natural Science Foundation of China(Grant Nos.61205205 and 6156508508)the General Program of Yunnan Provincial Applied Basic Research Project,China(Grant No.2016FB009)the Foundation for Personnel Training Projects of Yunnan Province,China(Grant No.KKSY201207068)
文摘The refraction index of the quantized lossy composite right-left handed transmission line（CRLH-TL） is deduced in the thermal coherence state. The results show that the negative refraction index（herein the left-handedness） can be implemented by the electric circuit dissipative factors（i.e., the resistances R and conductances G） in a higher frequency band（1.446 GHz≤ ω ≤ 15 GHz）, and flexibly adjusted by the left-handed circuit components（Cl, Ll） and the right-handed circuit components（Cr, Lr） at a lower frequency（ω = 0.995 GHz）. The flexible adjustment for left-handedness in a wider bandwidth will be significant for the microscale circuit design of the CRLH-TL and may make the theoretical preparation for its compact applications.
基金financial support for this work from the National Natural Science Foundation of China(Grant No.51874311,51904306)the Fundamental Research Funds for the Central Universities(Grant No.2022YJSSB03)。
文摘In order to solve the problem of large deformation at the intersection of deep large section soft rock roadway,this paper takes the intersection of kilometer-deep roadway in the Wanfu Coal Mine as an engineering example and applies Negative Poisson’s Ratio(NPR)steel anchor cable in roadway support for the first time.By combining numerical simulation indoor test,theoretical analysis and field test,the deformation mechanism of surrounding rock at the intersection of deep-buried roadway was analyzed,and the control strategy with micro NPR steel anchor cable as the core was put forward.Through numerical simulation,the numerical analysis model of roadway intersection with different intersection angles and excavation sequence was constructed,and the impact of two key variables of rake angle and excavation sequence on the stability of surrounding rock at roadway intersection was studied.The optimal dip angle is 90°and the optimal excavation sequence was determined as pump house-pump house passage-substation.The mechanical properties of the micro-NPR steel anchor cable were studied through the static tensile test in the laboratory.The results showed that the micro-NPR steel anchor cable showed high constant resistance,uniform tensile,no yield platform,and no obvious necking phenomenon during breaking.Through theoretical derivation,it was calculated that the vertical stress of roadway intersection is 45 MPa,and the bearing capacity of superposed arch composed of micro NPR steel anchor cable is 1257 kN,which is enough to guarantee the overall stability of intersection.Support application test and monitoring were carried out on site,and it was verified that the combined support strategy of short and long micro NPR steel anchor cable has a good control effect on large deformation of surrounding rock at intersection,which provides a new support material and support means for the safety and stabilization control of surrounding rock at intersection.
基金This project is supported by Provincial Natural Science Fundation of Hei-longjiang, China (No.E0311) and Provincial Key Project of Heilingjiang,China (No.G99A13-1).
文摘Based on the analyses of the structural feature and the function requirements of newstyle bottle cap, the two fundamental components, the lining washer and the outer body, are abstracted as a plate and a cylinder with thin wall respectively. For simulating the deformation of the lining washer under equiaxial pressure, the modified Lagrangian finite element analysis is applied on the 228 triangular elements. Under assembly pressure, the plastoelastic deformation of both the lining washer and the outer body are studied in terms of Tresca＇s yield criterion and the limitation of the plastic deformation is presented when the two components are assembled into one unit. For the production of this kind of bottle cover, experiments are carried out by carefully measuring the changes of the diameter of lining washer as well as that of the outer body. It is shown that results from the experiments have a good agreement with the theoretical calculation and the maximum value of the allowable pressure has successfully been used in the design of newly developed bottle cap production system.
基金supported by the National Natural Science Foundation of China(Grant Nos.61201030,60990322,and 60990320)the China Postdoctoral Science Foundation(Grant No.2012M521048)the Collegiate Natural Science Fund of Jiangsu Province,China(Grant No.12KJB140010)
文摘The nonlinear properties of lattice network-based（LNB） composite right-/left-handed transmission lines（CRLH TLs）with nonlinear capacitors are experimentally investigated.Harmonic generation,subharmonic generation,and parametric excitation are clearly observed in an unbalanced LNB CRLH TL separately.While the balanced design of the novel nonlinear TL shows that the subharmonic generation and parametric processes can be suppressed,and almost the same power level of the higher harmonics can be achieved over a wide bandwidth range,which are difficult to find in conventional CRLH TLs.
基金Project supported by the National Basic Research Program (973) of China (No. 2004CB719802) and the National Natural Science Foun-dation of China (No. 50477048)
文摘A quasi 0-dB coupler composed of a composite right-/left-handed transmission line (CRLH TL) and a conventional right-handed transmission line (RH TL) is presented. This coupler is shown to exhibit broad bandwidth and tight coupling char- acteristics. The circuit model and S-parameter results are also demonstrated. Another coupler with properly chosen loaded lumped-elements LL and CL in the CRLH TL is proposed to gain further understanding of the coupling mechanism. By adjusting the spacing between the CRLH TL and RH TL from 8 mm to 0.2 mm, it can be shown that backward coupling occurs in the left-handed region.
文摘This paper proposes a tunable zeroth-order resonator on a composite right/left-handed transmission line consisting of a transversely magnetized ferrite substrate periodically loaded by microstrip inductors. Based on the propagation theory of edge guided modes, the analysis procedure of this structure is introduced. The numerical results demonstrate the tunability of the resonant frequency by changing the DC bias magnetic field applied to the ferrite. In contrast to previous work, the proposed structure is easy to design and fabricate and does not require a chip component.
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.61401373)the Research Fund for the Doctoral Program of Southwest University,China(Grant No.SWU111030)
文摘A bandwidth microwave second harmonic generator is successfully designed using composite right/left-handed non- linear transmission lines （CRLH NLTLs） in a GaAs monolithic microwave integrated circuit （MMIC） technology. The structure parameters of CRLH NLTLs, e.g. host transmission line, rectangular spiral inductor, and nonlinear capacitor, have a great impact on the second harmonic performance enhancement in terms of second harmonic frequency, output power, and conversion efficiency. It has been experimentally demonstrated that the second harmonic frequency is deter- mined by the anomalous dispersion of CRLH NLTLs and can be significantly improved by effectively adjusting these structure parameters. A good agreement between the measured and simulated second harmonic performances of Ka-band CRLH NLTLs frequency multipliers is successfully achieved, which further validates the design approach of frequency multipliers on CRLH NLTLs and indicates the potentials of CRLH NLTLs in terms of the generation of microwave and millimeter-wave signal source.
文摘A compact multiband patch antenna is designed by using HFSS in this work, which is filled with composite right/left-handed transmission line （CRLH-TL） structures. The simulated results reveal that the operating frequency becomes lower with left-handed （LH） characteristics of the CRLH-TL structures enhanced, which enable antenna physical size reduction to a large extent. The proposed antenna is fabricated on the substrate Rogers R03201 （relative permittivity of 10.2）, which has a compact size of 12 mm×12 mm × 4 mm. Moreover, this antenna exhibits monopole-like radiation pattern at one resonance frequency and patch-like radiation at the other four resonant frequencies. Therefore, the designed antenna is useful for communication systems.
文摘Aiming at the characteristics of obvious block division and strong discreteness in the assembly production mode of electronic products,this paper proposes a composite U-shaped flexible assembly line model,and establishes a multi-objective optimization mathematical model on this basis.According to the characteristics of the model,the improved ranked positional weight(RPW)method is used to adjust the generation process of the initial solution of the genetic algorithm,so that the genetic algorithm can be applied to the block task model.At the same time,the adaptive cross mutation factor is used on the premise that tasks between different blocks are not crossed during cross mutation,which effectively improves the probability of excellent individuals retaining.After that,the algorithm is used to iterate to obtain the optimal solution task assignment.Finally,the algorithm results are compared with actual production data,which verifies the validity and feasibility of the assembly line model for discrete production mode proposed in this paper.
基金funded by the Pearl River Talent Recruitment Program(Grant No.2019CX01G338)Guangdong Province and the Research Funding of Shantou University for New Faculty Member(Grant No.NTF19024-2019).
文摘This paper presents a numerical investigation of the mechanical behaviour of segmental linings owing to the existence of voids in the composite lining.The composite lining was formed by mining outside and shield tunnelling inside with backfill in between.Finite element method was conducted to analyse the axial forces and bending moment for voids of different diameters at different positions.The results show that the axial forces in the transverse section increase near the crown and then invert and decrease on the left and right sides with an increase in the void centre angle(β)measured from the vertical axis.The increase in void diameter(d<300 mm)induces an increase in the axial force on the left and right sides when β=45°and 90°,while it decreases near the crown and invert.The occurrence of voids leads to an increase in the bending moment in the entire segment section with an angle β.
文摘Spray-applied membranes for waterproofing of sprayed concrete tunnels have led to the possibility of shear transfer between primary and secondary linings through the membrane interface,with the potential for reducing overall lining thickness.Laboratory tests have shown a reasonable degree of composite action in beam specimens.In this study,a numerical model previously calibrated against such tests is applied to a whole tunnel,considering soil–structure interaction and staged lining construction.The model shows composite action,and load sharing between the lining layers is expected in the tunnel as in the beams.Parametric studies over the practical range of interface stiffness values show that composite action is maintained,although at high interface stiffness,excessive bending may be imposed on the secondary lining,requiring additional reinforcement.An effcient composite shell design with minimal additional rein-forcement is achievable if the secondary lining thickness is reduced as compared to current practice.Robustness of the system,measured in terms of the interface’s ability to transfer stress under unequal loading causing distortion on the tunnel,is found to be generally ade-quate.However,adjacent construction in close proximity may provide insuffcient margin on membrane tensile de-bonding,particularly if the membrane is partially or fully saturated.
基金supported by the National Natural Science Foundation of China(Nos.60871027and 60971118)the National Basic Research Program(973) of China(No.2009CB613306)
文摘In this paper,novel dual-band (DB) branch-line couplers (BLCs) employing a composite right/left handed transmission line (CRLH TL) and fractal geometry are presented for the first time.The CRLH TL,with specified characteristic impedance and phase shift,consists of lumped elements for the left handed (LH) part and fractal-shaped microstrip lines (MLs) for the right handed (RH) part,which can be designed separately.Two designed BLCs are involved in size reduction,one using a 3/2 fractal curve of first iteration,the other constructed based on a hybrid shape of fractal and meandered lines.A miniaturized principle for CRLH TL realization is derived and an exact design method for fractal implementation is developed.For verification,an example coupler was fabricated and measured.Consistent numerical and experimental results confirmed the design concept,showing that the BLCs obtain DB behavior centered at 0.9 GHz and 1.8 GHz respectively with good in-band performance,except for slightly larger coupled insertion loss for the hybrid-shaped BLC case.In addition,the proposed fractal-and hybrid-shaped BLCs obtained a 49.7% and 64.1% size reduction respectively relative to their conventional counterparts working in the lower band.The most important contributions of this article are the demonstration of compatibility between the fractal and CRLH TL techniques and the provision of an alternative approach and a new concept for designing devices.
基金Project (Nos.60871027 and 60971118) supported by the National Natural Science Foundation of China
文摘A wideband composite right/left handed transmission line (CRLH TL) in conjunction with its corresponding equivalent circuit model is studied based on a cascaded complementary single split ring resonator (CCSSRR).The characterization is performed by theory analysis,circuit simulation,and full-wave electromagnetic (EM) simulation.The negative refractive index (NRI) and backward wave propagation performance of the CRLH TL are demonstrated.For application,a bandpass filter (BPF) with enhanced out-of-band selectivity and harmonic suppression operating at the wireless local area network (WLAN) band is designed,fabricated,and measured by combining the CRLH TL with a complementary electric inductive-capacitive resonator (CELC).Three CELC cells with wideband stopband performance in the conductor strip and ground plane,respectively,are utilized in terms of single negative permeability.The design concept has been verified by the measurement data.
