It is important to measure wool diameter as the wool quality depends on the fibre diameter D and its deviation CVD. According to IWTO standards, the fibre diameter parameters can be tested with the methods of Airflowm...It is important to measure wool diameter as the wool quality depends on the fibre diameter D and its deviation CVD. According to IWTO standards, the fibre diameter parameters can be tested with the methods of Airflowmeter, DA; Sirolan-Laserscan, DL and CVDL; and OFDA, Do and CVDo. However, these parameters only characterize the average diameter and the variation between the fibres. A single fibre analyzer (SIFAN) can be used to measure fibre profile along the fibre and fibre tensile properties simultaneously. The results obtained from the four methods show that there are i) high relationships between Laserscan values and the results of Airflow, OFDA and SIFAN in the average diameters; ii) correlations between CVDL and CVDo or CVDave; iii) the high correlation between Dave-Dmia but a low correlation between Dave-Dmax; and iv) the relationships between the wool quality and the ratio of Dmln/Dave and Dmin/DL. Based on the results and discussions, the effective measurement of wool diameter should be the SIFAN method. The new parameters of Dmin/DL and Dmin/Dave are the useful value for the evaluation of wool quality in practice.展开更多
The diameter distribution of trees in a stand provides the basis for determining the stand’s ecological and economic value,its structure and stability and appropriate management practices.Scots pine(Pinus sylvestris ...The diameter distribution of trees in a stand provides the basis for determining the stand’s ecological and economic value,its structure and stability and appropriate management practices.Scots pine(Pinus sylvestris L.)is one of the most common and important conifers in Turkey,so a well-planned management schedule is critical.Diameter distribution models to accurately describe the stand structure help improve management strategies,but developing reliable models requires a deep understanding of the growth,output and constraints of the forests.The most important information derived by diameter distribution models is primary data on horizontal stand structure for each diameter class of trees:basal area and volume per unit area.These predictions are required to estimate the range of products and predicted volume and yield from a forest stand.Here,to construct an accurate,reliable diameter distribution model for natural Scots pine stands in the Türkmen Mountain region,we used Johnson’s SBdistribution to represent the empirical diameter distributions of the stands using ground-based measurements from 55 sample plots that included1219 trees in natural distribution zones of the forests.As an alternative,nonparametric approach,which does not require any predefined function,an artificial intelligence model was constructed based on support vector machine methodology.An error index was calculated to evaluate the results.Overall,both Johnson’s SB probability density function with a three-parameter recovery approach and the support vector regression methodology provided reliable estimates of the diameter distribution of these stands.展开更多
The number and composition of species in a community can be quantified withα-diversity indices,including species richness(R),Simpson’s index(D),and the Shannon-Wiener index(H΄).In forest communities,there are large ...The number and composition of species in a community can be quantified withα-diversity indices,including species richness(R),Simpson’s index(D),and the Shannon-Wiener index(H΄).In forest communities,there are large variations in tree size among species and individu-als of the same species,which result in differences in eco-logical processes and ecosystem functions.However,tree size inequality(TSI)has been largely neglected in studies using the available diversity indices.The TSI in the diameter at breast height(DBH)data for each of 99920 m×20 m forest census quadrats was quantified using the Gini index(GI),a measure of the inequality of size distribution.The generalized performance equation was used to describe the rotated and right-shifted Lorenz curve of the cumulative proportion of DBH and the cumulative proportion of number of trees per quadrat.We also examined the relationships ofα-diversity indices with the GI using correlation tests.The generalized performance equation effectively described the rotated and right-shifted Lorenz curve of DBH distributions,with most root-mean-square errors(990 out of 999 quadrats)being<0.0030.There were significant positive correlations between each of threeα-diversity indices(i.e.,R,D,and H’)and the GI.Nevertheless,the total abundance of trees in each quadrat did not significantly influence the GI.This means that the TSI increased with increasing spe-cies diversity.Thus,two new indices are proposed that can balanceα-diversity against the extent of TSI in the com-munity:(1−GI)×D,and(1−GI)×H’.These new indices were significantly correlated with the original D and H΄,and did not increase the extent of variation within each group of indices.This study presents a useful tool for quantifying both species diversity and the variation in tree sizes in forest communities,especially in the face of cumulative species loss under global climate change.展开更多
Beverloo's scaling law can describe the flow rate of grains discharging from hoppers. In this paper, we show that the Beverloo's scaling law is valid for varying material parameters. The flow rates from a hopp...Beverloo's scaling law can describe the flow rate of grains discharging from hoppers. In this paper, we show that the Beverloo's scaling law is valid for varying material parameters. The flow rates from a hopper with different hopper and orifice sizes(D, D_0) are studied by running large-scale simulations. When the hopper size is fixed, the numerical results show that Beverloo's law is valid even if the orifice diameter is very large and then the criteria for this law are discussed.To eliminate the effect of walls, it is found that the criteria can be suggested as D-D_0≥ 40 d or D/D_0≥ 2. Interestingly,it is found that there is still a scaling relation between the flow rate and orifice diameter if D/D_0 is fixed and less than 2.When the orifice diameter is close to the hopper size, the velocity field changes and the vertical velocities of grains above the free fall region are much larger. Then, the free fall arch assumption is invalid and Beverloo's law is inapplicable.展开更多
文摘It is important to measure wool diameter as the wool quality depends on the fibre diameter D and its deviation CVD. According to IWTO standards, the fibre diameter parameters can be tested with the methods of Airflowmeter, DA; Sirolan-Laserscan, DL and CVDL; and OFDA, Do and CVDo. However, these parameters only characterize the average diameter and the variation between the fibres. A single fibre analyzer (SIFAN) can be used to measure fibre profile along the fibre and fibre tensile properties simultaneously. The results obtained from the four methods show that there are i) high relationships between Laserscan values and the results of Airflow, OFDA and SIFAN in the average diameters; ii) correlations between CVDL and CVDo or CVDave; iii) the high correlation between Dave-Dmia but a low correlation between Dave-Dmax; and iv) the relationships between the wool quality and the ratio of Dmln/Dave and Dmin/DL. Based on the results and discussions, the effective measurement of wool diameter should be the SIFAN method. The new parameters of Dmin/DL and Dmin/Dave are the useful value for the evaluation of wool quality in practice.
基金supported by Turkish General Directorate of Forestry。
文摘The diameter distribution of trees in a stand provides the basis for determining the stand’s ecological and economic value,its structure and stability and appropriate management practices.Scots pine(Pinus sylvestris L.)is one of the most common and important conifers in Turkey,so a well-planned management schedule is critical.Diameter distribution models to accurately describe the stand structure help improve management strategies,but developing reliable models requires a deep understanding of the growth,output and constraints of the forests.The most important information derived by diameter distribution models is primary data on horizontal stand structure for each diameter class of trees:basal area and volume per unit area.These predictions are required to estimate the range of products and predicted volume and yield from a forest stand.Here,to construct an accurate,reliable diameter distribution model for natural Scots pine stands in the Türkmen Mountain region,we used Johnson’s SBdistribution to represent the empirical diameter distributions of the stands using ground-based measurements from 55 sample plots that included1219 trees in natural distribution zones of the forests.As an alternative,nonparametric approach,which does not require any predefined function,an artificial intelligence model was constructed based on support vector machine methodology.An error index was calculated to evaluate the results.Overall,both Johnson’s SB probability density function with a three-parameter recovery approach and the support vector regression methodology provided reliable estimates of the diameter distribution of these stands.
基金supported by the National Natural Science Foundation of China(32101260).
文摘The number and composition of species in a community can be quantified withα-diversity indices,including species richness(R),Simpson’s index(D),and the Shannon-Wiener index(H΄).In forest communities,there are large variations in tree size among species and individu-als of the same species,which result in differences in eco-logical processes and ecosystem functions.However,tree size inequality(TSI)has been largely neglected in studies using the available diversity indices.The TSI in the diameter at breast height(DBH)data for each of 99920 m×20 m forest census quadrats was quantified using the Gini index(GI),a measure of the inequality of size distribution.The generalized performance equation was used to describe the rotated and right-shifted Lorenz curve of the cumulative proportion of DBH and the cumulative proportion of number of trees per quadrat.We also examined the relationships ofα-diversity indices with the GI using correlation tests.The generalized performance equation effectively described the rotated and right-shifted Lorenz curve of DBH distributions,with most root-mean-square errors(990 out of 999 quadrats)being<0.0030.There were significant positive correlations between each of threeα-diversity indices(i.e.,R,D,and H’)and the GI.Nevertheless,the total abundance of trees in each quadrat did not significantly influence the GI.This means that the TSI increased with increasing spe-cies diversity.Thus,two new indices are proposed that can balanceα-diversity against the extent of TSI in the com-munity:(1−GI)×D,and(1−GI)×H’.These new indices were significantly correlated with the original D and H΄,and did not increase the extent of variation within each group of indices.This study presents a useful tool for quantifying both species diversity and the variation in tree sizes in forest communities,especially in the face of cumulative species loss under global climate change.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11705256 and 11605264)
文摘Beverloo's scaling law can describe the flow rate of grains discharging from hoppers. In this paper, we show that the Beverloo's scaling law is valid for varying material parameters. The flow rates from a hopper with different hopper and orifice sizes(D, D_0) are studied by running large-scale simulations. When the hopper size is fixed, the numerical results show that Beverloo's law is valid even if the orifice diameter is very large and then the criteria for this law are discussed.To eliminate the effect of walls, it is found that the criteria can be suggested as D-D_0≥ 40 d or D/D_0≥ 2. Interestingly,it is found that there is still a scaling relation between the flow rate and orifice diameter if D/D_0 is fixed and less than 2.When the orifice diameter is close to the hopper size, the velocity field changes and the vertical velocities of grains above the free fall region are much larger. Then, the free fall arch assumption is invalid and Beverloo's law is inapplicable.
