The integrated structure parts are widely used in aircraft. The distortion caused by residual stresses in thick pre-stretched aluminum plates during machining integrated parts is a common and serious problem. To predi...The integrated structure parts are widely used in aircraft. The distortion caused by residual stresses in thick pre-stretched aluminum plates during machining integrated parts is a common and serious problem. To predict and control the machining distortion, the residual stress distribution in the thick plate must be measured firstly. The modified removal method for measuring residual stress in thick pre-stretched aluminum plates is proposed and the stress-strain relation matrix is deduced by elasticity theory. The residual stress distribution in specimen of 7050T7451 plate is measured by using the method, and measurement results are analyzed and compared with data obtained by other methods. The method is effective to measure the residual stress.展开更多
Drop-weight impact tests were conducted on 2024-T3 aluminum plates with five types of impactors, and then the effects of the dent on the residual ultimate strength of the 2024-T3 specimens were investigated through ax...Drop-weight impact tests were conducted on 2024-T3 aluminum plates with five types of impactors, and then the effects of the dent on the residual ultimate strength of the 2024-T3 specimens were investigated through axial compression tests. Results indicate that with increase in dent depth, the five types of dents affect the ultimate strength of the plate in different trends. Nevertheless, other than the plate global deflection caused by impacting, the dent itself has unremarkable effect on the ultimate strength. The mathematical expressions are derived regarding the relationship between impact energy factor and the dent depth factor as well as the compressive ultimate strength reduction rate and the dent depth factor.展开更多
The microstructure and mechanical properties of 105 mm thick 5083 aluminum alloy hot rolled plate were investigated by metallurgical microscope, scanning electron microscope and tensile testing machine, and three majo...The microstructure and mechanical properties of 105 mm thick 5083 aluminum alloy hot rolled plate were investigated by metallurgical microscope, scanning electron microscope and tensile testing machine, and three major characteristic problems in mechanical properties inhomogeneity were explained. The results show that the mechanical properties of the rolled plate are inhomogeneous along the thickness direction. From the surface to the center, the strength shows an inverted "N" shape change and the elongation presents a semi "U" shape change. Several similar structural units composed of long fibrous grains(LFG) and short fibrous grains bands(SFGB) exist in a special layer(Layer 2) adjacent to the surface. This alternating layered distribution of LFG and SFGB is conducive to improving the plasticity by dispersing the plastic deformation concentrated on the boundary line(BL) between them. However, their different deformability will cause the alternation of additional stresses during the hot rolling, leading to the strength reduction. The closer the location to the center of the plate is, the more likely the recovery rather than the recrystallization occurs. This is the possible reason for the unnegligible difference in strength near the central region(Layer 4 and Layer 5).展开更多
The effect of the pre-deformation of rolling combined with stretching on the stress corrosion cracking resistance of aluminum alloy 2519A was studied by means of the slow strain rate technique at 10-6 s-1. The tensile...The effect of the pre-deformation of rolling combined with stretching on the stress corrosion cracking resistance of aluminum alloy 2519A was studied by means of the slow strain rate technique at 10-6 s-1. The tensile strength and stress corrosion index of the alloy plate with 7% rolling plus 3% perpendicular stretching were 481 MPa and 0.0429, respectively, showing better mechanical property and stress corrosion cracking resistance than those with 4% rolling plus 3% parallel stretching or 7% rolling plus 3% parallel stretching, which is due to its finer and denser precipitates within the grains, discontinuous grain boundary precipitates, as well as more narrow precipitate-free zone width. Such microstructure is attributing to the denser and more homogeneously distributed dislocations which are produced by the pre-deformation.展开更多
The FE simulation results of transverse stresses and strains during welding of thin aluminum alloy plate are presented. The results indicate that restraint condition is the main factor that determines whether or not h...The FE simulation results of transverse stresses and strains during welding of thin aluminum alloy plate are presented. The results indicate that restraint condition is the main factor that determines whether or not hot cracking will occur. With rigid restraint hot cracking (crater cracking) will occur at the arc-stopping end, and such cracking usually will not occur without external restraint. But under restraint-free condition it is easy for terminal cracks to occur.展开更多
Ballistic impact tests were carried out with examined projectiles of the Ti-6Al-4V titanium alloy to investigate the impact response of the 2618 aluminum plates at a nominal velocity of 210 m/s. The influence of proje...Ballistic impact tests were carried out with examined projectiles of the Ti-6Al-4V titanium alloy to investigate the impact response of the 2618 aluminum plates at a nominal velocity of 210 m/s. The influence of projectile forms and oblique angles on damage formation was particularly discussed by applying different loading conditions such as multiple projectile forms and oblique angles. Additionally, the numerical simulation method was employed to provide further insight into the characteristics of damage and target responses. The Johnson-Cook(J-C)constitutive model with revised failure parameters was used to support the simulations to assess target responses and characteristics of the damage created from different impact conditions. Results show that there is a significant transition in the deformation mode as changes of the projectile form are applied. Moreover, the cracks on the back of the 2618 aluminum alloy plates impacted by the solid plate projectile and the hollow blade projectile tend to locate at different positions, which are supposed to be influenced by local bending and stretching. The work in this paper may provide guidance for the design of fan blade containment systems.展开更多
The influence of quenching water temperature, pre stretching amount and aging temperature and times on residual stress in 7075 aluminum thick plate was studied by the measurement of residual stress using drilling hole...The influence of quenching water temperature, pre stretching amount and aging temperature and times on residual stress in 7075 aluminum thick plate was studied by the measurement of residual stress using drilling hole method. The results indicate that residual stress decreases by 30% with increasing quenching water temperature from 40 ℃ to 80 ℃, 20% with increasing aging temperature from 100 ℃ to 180 ℃,and 20% with increasing aging times from 5 h to 25 h. Also, residual stress decreases to zero with increasing pre stretching amount to approximately 2%. Hence, residual stress in 7075 aluminum thick plate is reduced by the control of quenching water temperature at 80 ℃ and with pre stretching amount of about 2%. An optimal aging temperature and time should be systemically investigated to obtain combination of high mechanical performances and lower residual stress for manufacturing of 7075 aluminum alloy thick plates.展开更多
The interfacial shear property of steel-mushy aluminum bonding plate was studied, and the relationship between aluminum solid fraction and the interfacial shear strength of bonding plate was determined. The results sh...The interfacial shear property of steel-mushy aluminum bonding plate was studied, and the relationship between aluminum solid fraction and the interfacial shear strength of bonding plate was determined. The results showed that when aluminum solid fraction is 34.3 %, the maximum interfacial shear strength of bonding plate is 71 .0 MPa.展开更多
Multichip on Ahnnintnn Metal Plate（MOAMP） technology with simple structure and low thermal resistance is developed for effective heat reratrval of Light Emitting Diode（LED） p-n junction and LED lighting module to ...Multichip on Ahnnintnn Metal Plate（MOAMP） technology with simple structure and low thermal resistance is developed for effective heat reratrval of Light Emitting Diode（LED） p-n junction and LED lighting module to have high reliability. The thermal resistance of LED modules was numerical and experimental. Thermal resistance from the jtnction to aluminten metal plate, considering input power of IFD module using MOAMP technology, is 3.02 K/W, 3.23 K/W for the measured and calculated, respectively. We expect that the reported MOAMP technology with low thermal resistance will be a promising solution for high power LED fighting modules.展开更多
As a critical structure of aerospace equipment,aluminum alloy stiffened plate will influence the stability of spacecraft in orbit and the normal operation of the system.In this study,a GWO-ELM algorithm-based impact d...As a critical structure of aerospace equipment,aluminum alloy stiffened plate will influence the stability of spacecraft in orbit and the normal operation of the system.In this study,a GWO-ELM algorithm-based impact damage identification method is proposed for aluminum alloy stiffened panels to monitor and evaluate the damage condition of such stiffened panels of spacecraft.Firstly,together with numerical simulation,the experimental simulation to obtain the damage acoustic emission signals of aluminum alloy reinforced panels is performed,to establish the damage data.Subsequently,the amplitude-frequency characteristics of impact damage signals are extracted and put into an extreme learning machine(ELM)model to identify the impact location and damage degree,and the Gray Wolf Optimization(GWO)algorithm is employed to update the weight parameters of the model.Finally,experiments are conducted on the irregular aluminum alloy stiffened plate with the size of 2200 mm×500 mm×10 mm,the identification accuracy of impact position and damage degree is 98.90% and 99.55% in 68 test areas,respectively.Comparative experiments with ELM and backpropagation neural networks(BPNN)demonstrate that the impact damage identification of aluminum alloy stiffened plate based on GWO-ELM algorithm can serve as an effective way to monitor spacecraft structural damage.展开更多
The interfacial status of the steel-aluminum solid to liquid bonding plates (their steel plate surfaces were or were not immersed in flux aqueous solution) were measured by using SEM (Scanning Electron Microscope) and...The interfacial status of the steel-aluminum solid to liquid bonding plates (their steel plate surfaces were or were not immersed in flux aqueous solution) were measured by using SEM (Scanning Electron Microscope) and X-ray diffraction . The results showed that the layer of flux (the minimum thickness was 15 μm on the steel plate surface) could protect the steel plate surface from oxidizing effectively at high temperature in solid to liquid bonding. The melt temperatUre of the flux should be lower than 580 ℃ so that it could be melted and removed completely. No. 1 flux (patent product made by the author) made up of halogeindes could also force liquid aluminum to infiltrate into steel plate surface and thus the interfacial shear strength of the bonding plate was rather large.展开更多
The effect of the microstructure of plates fabricated both in the traditional process, involving casting, hot rolling and cold rolling （HR）, and in the novel twin roll casting ＋ cold rolling （TRC） process on the ...The effect of the microstructure of plates fabricated both in the traditional process, involving casting, hot rolling and cold rolling （HR）, and in the novel twin roll casting ＋ cold rolling （TRC） process on the surface quality of presensitized （PS） plates was analyzed by optical microscopy （OM）, scanning electron microscopy （SEM）, and energy-dispersive X-ray spectroscopy （EDXS）. The formation of pores on the surface of the electrolyzed HR plate could be attributed to the presence of approximately 1-μm-sized large Al-Fe precipitates in the HR plate compared to the smaller precipitates in the TRC plate. Moreover, residual graphite lubricants used during the TRC process were entrapped on the surface of the TRC plate during the subsequent rolling process. The entrapped pollutants tended to further deteriorate the formation of pores on the surface of the TRC plate, and no residual carbon was detected on the surface of the HR plate. Furthermore, the surface quality of the TRC plate can be improved by surface cleaning before the cold rolling process, which could dramatically lower the residual graphite on the surface.展开更多
文摘The integrated structure parts are widely used in aircraft. The distortion caused by residual stresses in thick pre-stretched aluminum plates during machining integrated parts is a common and serious problem. To predict and control the machining distortion, the residual stress distribution in the thick plate must be measured firstly. The modified removal method for measuring residual stress in thick pre-stretched aluminum plates is proposed and the stress-strain relation matrix is deduced by elasticity theory. The residual stress distribution in specimen of 7050T7451 plate is measured by using the method, and measurement results are analyzed and compared with data obtained by other methods. The method is effective to measure the residual stress.
基金Projects(13R21421700,13R21421800)sponsored by Shanghai Postdoctoral Scientific Program,China
文摘Drop-weight impact tests were conducted on 2024-T3 aluminum plates with five types of impactors, and then the effects of the dent on the residual ultimate strength of the 2024-T3 specimens were investigated through axial compression tests. Results indicate that with increase in dent depth, the five types of dents affect the ultimate strength of the plate in different trends. Nevertheless, other than the plate global deflection caused by impacting, the dent itself has unremarkable effect on the ultimate strength. The mathematical expressions are derived regarding the relationship between impact energy factor and the dent depth factor as well as the compressive ultimate strength reduction rate and the dent depth factor.
基金Project(2011DFR50950)supported by the International Science and Technology Cooperation Program of ChinaProject(51971183)supported by the National Natural Science Foundation of ChinaProject(cstc2019jcyj-msxmX0594)supported by the Natural Science Foundation of Chongqing,China。
文摘The microstructure and mechanical properties of 105 mm thick 5083 aluminum alloy hot rolled plate were investigated by metallurgical microscope, scanning electron microscope and tensile testing machine, and three major characteristic problems in mechanical properties inhomogeneity were explained. The results show that the mechanical properties of the rolled plate are inhomogeneous along the thickness direction. From the surface to the center, the strength shows an inverted "N" shape change and the elongation presents a semi "U" shape change. Several similar structural units composed of long fibrous grains(LFG) and short fibrous grains bands(SFGB) exist in a special layer(Layer 2) adjacent to the surface. This alternating layered distribution of LFG and SFGB is conducive to improving the plasticity by dispersing the plastic deformation concentrated on the boundary line(BL) between them. However, their different deformability will cause the alternation of additional stresses during the hot rolling, leading to the strength reduction. The closer the location to the center of the plate is, the more likely the recovery rather than the recrystallization occurs. This is the possible reason for the unnegligible difference in strength near the central region(Layer 4 and Layer 5).
基金Project (2005CB623706) supported by the National Basic Research Program of China
文摘The effect of the pre-deformation of rolling combined with stretching on the stress corrosion cracking resistance of aluminum alloy 2519A was studied by means of the slow strain rate technique at 10-6 s-1. The tensile strength and stress corrosion index of the alloy plate with 7% rolling plus 3% perpendicular stretching were 481 MPa and 0.0429, respectively, showing better mechanical property and stress corrosion cracking resistance than those with 4% rolling plus 3% parallel stretching or 7% rolling plus 3% parallel stretching, which is due to its finer and denser precipitates within the grains, discontinuous grain boundary precipitates, as well as more narrow precipitate-free zone width. Such microstructure is attributing to the denser and more homogeneously distributed dislocations which are produced by the pre-deformation.
文摘The FE simulation results of transverse stresses and strains during welding of thin aluminum alloy plate are presented. The results indicate that restraint condition is the main factor that determines whether or not hot cracking will occur. With rigid restraint hot cracking (crater cracking) will occur at the arc-stopping end, and such cracking usually will not occur without external restraint. But under restraint-free condition it is easy for terminal cracks to occur.
基金financial support from the National Natural Science Foundation of China (No. 11772268, 11522220, 11627901 and 11527803)
文摘Ballistic impact tests were carried out with examined projectiles of the Ti-6Al-4V titanium alloy to investigate the impact response of the 2618 aluminum plates at a nominal velocity of 210 m/s. The influence of projectile forms and oblique angles on damage formation was particularly discussed by applying different loading conditions such as multiple projectile forms and oblique angles. Additionally, the numerical simulation method was employed to provide further insight into the characteristics of damage and target responses. The Johnson-Cook(J-C)constitutive model with revised failure parameters was used to support the simulations to assess target responses and characteristics of the damage created from different impact conditions. Results show that there is a significant transition in the deformation mode as changes of the projectile form are applied. Moreover, the cracks on the back of the 2618 aluminum alloy plates impacted by the solid plate projectile and the hollow blade projectile tend to locate at different positions, which are supposed to be influenced by local bending and stretching. The work in this paper may provide guidance for the design of fan blade containment systems.
文摘The influence of quenching water temperature, pre stretching amount and aging temperature and times on residual stress in 7075 aluminum thick plate was studied by the measurement of residual stress using drilling hole method. The results indicate that residual stress decreases by 30% with increasing quenching water temperature from 40 ℃ to 80 ℃, 20% with increasing aging temperature from 100 ℃ to 180 ℃,and 20% with increasing aging times from 5 h to 25 h. Also, residual stress decreases to zero with increasing pre stretching amount to approximately 2%. Hence, residual stress in 7075 aluminum thick plate is reduced by the control of quenching water temperature at 80 ℃ and with pre stretching amount of about 2%. An optimal aging temperature and time should be systemically investigated to obtain combination of high mechanical performances and lower residual stress for manufacturing of 7075 aluminum alloy thick plates.
文摘The interfacial shear property of steel-mushy aluminum bonding plate was studied, and the relationship between aluminum solid fraction and the interfacial shear strength of bonding plate was determined. The results showed that when aluminum solid fraction is 34.3 %, the maximum interfacial shear strength of bonding plate is 71 .0 MPa.
文摘Multichip on Ahnnintnn Metal Plate（MOAMP） technology with simple structure and low thermal resistance is developed for effective heat reratrval of Light Emitting Diode（LED） p-n junction and LED lighting module to have high reliability. The thermal resistance of LED modules was numerical and experimental. Thermal resistance from the jtnction to aluminten metal plate, considering input power of IFD module using MOAMP technology, is 3.02 K/W, 3.23 K/W for the measured and calculated, respectively. We expect that the reported MOAMP technology with low thermal resistance will be a promising solution for high power LED fighting modules.
基金supported by National Key Research and Development Project(2020YFE0204900)National Natural Science Foundation of China(Grant Nos.61903224,62073193,61873333)Key Research and Development Plan of Shandong Province(Grant Nos.2019TSLH0301,2021CXGC010204).
文摘As a critical structure of aerospace equipment,aluminum alloy stiffened plate will influence the stability of spacecraft in orbit and the normal operation of the system.In this study,a GWO-ELM algorithm-based impact damage identification method is proposed for aluminum alloy stiffened panels to monitor and evaluate the damage condition of such stiffened panels of spacecraft.Firstly,together with numerical simulation,the experimental simulation to obtain the damage acoustic emission signals of aluminum alloy reinforced panels is performed,to establish the damage data.Subsequently,the amplitude-frequency characteristics of impact damage signals are extracted and put into an extreme learning machine(ELM)model to identify the impact location and damage degree,and the Gray Wolf Optimization(GWO)algorithm is employed to update the weight parameters of the model.Finally,experiments are conducted on the irregular aluminum alloy stiffened plate with the size of 2200 mm×500 mm×10 mm,the identification accuracy of impact position and damage degree is 98.90% and 99.55% in 68 test areas,respectively.Comparative experiments with ELM and backpropagation neural networks(BPNN)demonstrate that the impact damage identification of aluminum alloy stiffened plate based on GWO-ELM algorithm can serve as an effective way to monitor spacecraft structural damage.
文摘The interfacial status of the steel-aluminum solid to liquid bonding plates (their steel plate surfaces were or were not immersed in flux aqueous solution) were measured by using SEM (Scanning Electron Microscope) and X-ray diffraction . The results showed that the layer of flux (the minimum thickness was 15 μm on the steel plate surface) could protect the steel plate surface from oxidizing effectively at high temperature in solid to liquid bonding. The melt temperatUre of the flux should be lower than 580 ℃ so that it could be melted and removed completely. No. 1 flux (patent product made by the author) made up of halogeindes could also force liquid aluminum to infiltrate into steel plate surface and thus the interfacial shear strength of the bonding plate was rather large.
基金financially supported by the National Natural Science Foundation of China (No. 51074117)the International Scientific and Technological Cooperation Projects of China (No. 2013DFG12750)+1 种基金the Beijing Natural Science Foundation (No. 3142007)the Great Wall Scholar Program (No. CIT&TCD20140301)
文摘The effect of the microstructure of plates fabricated both in the traditional process, involving casting, hot rolling and cold rolling （HR）, and in the novel twin roll casting ＋ cold rolling （TRC） process on the surface quality of presensitized （PS） plates was analyzed by optical microscopy （OM）, scanning electron microscopy （SEM）, and energy-dispersive X-ray spectroscopy （EDXS）. The formation of pores on the surface of the electrolyzed HR plate could be attributed to the presence of approximately 1-μm-sized large Al-Fe precipitates in the HR plate compared to the smaller precipitates in the TRC plate. Moreover, residual graphite lubricants used during the TRC process were entrapped on the surface of the TRC plate during the subsequent rolling process. The entrapped pollutants tended to further deteriorate the formation of pores on the surface of the TRC plate, and no residual carbon was detected on the surface of the HR plate. Furthermore, the surface quality of the TRC plate can be improved by surface cleaning before the cold rolling process, which could dramatically lower the residual graphite on the surface.
