Sc_(2)O_(3),as a host for solid-state laser gain materials,has advantage of high thermal conductivity and easy matching with activating ions,which is promising in high-power laser applications.Currently,Yb-doped Sc_(2...Sc_(2)O_(3),as a host for solid-state laser gain materials,has advantage of high thermal conductivity and easy matching with activating ions,which is promising in high-power laser applications.Currently,Yb-doped Sc_(2)O_(3) ceramics have been fabricated at very high sintering temperatures,but their optical quality and sintering process still need further improvement.In this work,5%Yb:Sc_(2)O_(3)(in mass)nano-powders were obtained by co-precipitation,and then transparent ceramics were fabricated by vacuum pre-sintering and hot isostatic pressing(HIP)post-treatment.The cubic Yb:Sc_(2)O_(3) nano-powders with good dispersity and an average crystallite of 29 nm were obtained.Influence of pre-sintering temperatures(1500-1700℃)on densification process,microstructure changes,and optical transmittance of Yb:Sc_(2)O_(3) ceramics was detected.Experimental data revealed that all samples have a uniform microstructure,while the average grain sizes increase with the increase of the sintering temperatures.Impressively,the optimum in-line transmittance of Yb:Sc_(2)O_(3) ceramics,pre-sintered at 1550℃after HIP post-treatment,reaches 78.1%(theoretical value of 80%)at 1100 nm.Spectroscopic properties of the Yb:Sc_(2)O_(3) ceramics reveal that the minimum population inversion parameterβ2 and the luminescence decay time of 5%Yb:Sc_(2)O_(3) ceramics are 0.041 and 0.49 ms,respectively,which demonstrate that the optical quality of the Yb:Sc_(2)O_(3) has been improved.Meanwhile,their best vacuum sintering temperature can be controlled down to a lower temperature(1550℃).In conclusion,Yb:Sc_(2)O_(3) nano-powders are successfully synthesized by co-precipitation method,and good optical quality transparent ceramics are fabricated by vacuum pre-sintering at 1550℃and HIP post-treatment.展开更多
Er^(3+),Na^(+)co-doped CaF_(2) transparent ceramics with Er^(3+)dopant concentration of 3% and Na^(+) of 0%,0.5%,1.0%,1.5% and 2.0% were fabricated by the vacuum hot pressing method with 16 mm in diameter and 3 mm in ...Er^(3+),Na^(+)co-doped CaF_(2) transparent ceramics with Er^(3+)dopant concentration of 3% and Na^(+) of 0%,0.5%,1.0%,1.5% and 2.0% were fabricated by the vacuum hot pressing method with 16 mm in diameter and 3 mm in thickness.The average grain size of the obtained Er,Na∶CaF_(2) powders varied from 28 nm to 36 nm with the shape of sphere.The effects of Na^(+) doping on the transmittance,microstructure and spectral properties of Er^(3+)∶CaF_(2) transparent ceramics were investigated.The transmittance of all the obtained ceramic samples is above 84%in the wavelength of 1000 nm.The results show that after introducing Na^(+)into Er^(3+)∶CaF_(2) transparent ceramics,charge-neutralized Er^(3+)-Na^(+) structure formed which prevent Er^(3+) from clustering.The emission spectra of Er^(3+) in CaF_(2) transparent ceramics at around 1.5 and 2.7μm could be modulated by adjusting the concentration of Na^(+) and the near-infrared fluorescence lifetime at around 1.5μm increase with the increasing of Na^(+) concentration,reaching a maximum of 56.75 ms.展开更多
substitutes tion, high loosely dis Neodymium doped-yttrium aluminum garnet （Nd ： YAG） transparent polycrystalline ceramics already become of single crystals because they are provided with easy fabrication, low cost...substitutes tion, high loosely dis Neodymium doped-yttrium aluminum garnet （Nd ： YAG） transparent polycrystalline ceramics already become of single crystals because they are provided with easy fabrication, low cost, large size, highly doped concentraheat conductivity, mass fabrication, multi-layers and multi-filnctions. The Nd：YAG precursor powders with persed , slightly agglomerated, super fine and YAG cubic crystal phase were synthesized at 1100 ℃ by the homogeneous precipitation method, using Nd2O3, Y2O3, Al（NO3）3·9H2O and urea as raw materials, （NH4）2SO4 as electrical stabilizer, TEOS as sintering additive. The Nd：YAG transparent ceramics were prepared after being vacuum sintered at 1700 ℃ for 5 h. The Nd：YAG ceramic materials were characterized by the TG-DTA, XRD, FT-IR, TEM, FEG-ESEM and FT-PL. The results show that the crystallization temperature of YAG is 850 ℃ and the intermediate crystal phase YAP forming during the heat treatment transforms to YAG cubic crystal phase at 1050 ℃. The lasing wavelength of （Nd0.01 Y0.99）3Al5O12 transparent ceramics is 1.065 μm and there exists a slight red-shift compared to the single crystal with the same chemical composition. The optical transmittance is 45 % in the visible light and 58 % in the near infrared light and the optical transmittance descends with the decreasing the wavelength.展开更多
Yb：YAG nanopowders were synthesized by the alcohol-water co-precipitatlon method adding MgO as sintering additives. Appropriate amount of MgO adding can restrict the agglomeration and reduce the particle size of Yb：...Yb：YAG nanopowders were synthesized by the alcohol-water co-precipitatlon method adding MgO as sintering additives. Appropriate amount of MgO adding can restrict the agglomeration and reduce the particle size of Yb：YAG powders. When the MgO content was 0.04wt%, well-dispersed Yb：YAG powders with ellipsoidal particles of less than 100 nm diameter were obtained. The experimental results showed the valence variation of doping ion Yb〉 would not appear when adding MgO as sintering additives, so ceramics showed colorless transparent instead of green due to Yb^2＋ color center using traditional SiO2 as additives. The transmission of the sintered Yb：YAG ceramics can reach 80.6% even without annealing. Ceramic morphology showed that the grains had uniform-distribution with the size of 10 iam or so, and no impurity and pore existed in the grain boundary and crystalline while using optimal sintering conditions.展开更多
The effects of different sintering addictives on the preparation of CaF2 transparent ceramics were studied. Transparent CaF2 ceramics were fabricated by vacuum sintering and hot isostatic pressing （HIP） method, usin...The effects of different sintering addictives on the preparation of CaF2 transparent ceramics were studied. Transparent CaF2 ceramics were fabricated by vacuum sintering and hot isostatic pressing （HIP） method, using CaF2 nanopowders synthesized by chemical precipitation method as raw materials. The nanopowders and transparent ceramics were studied using X-ray diffraction, transmission electron microscopy （TEM）, scanning electron microscopy （SEM） and spectrophotometer. The experimental results indicated that the obtained nanopowders presented normal distribution with grain size about 30 nm; transmittance of CaF2 transparent ceramics was 39% and 26% at 1100 nm for LiF and NaF as sintering addictives, respectively, with corresponding mean grain size 188 μm and 44 μm. Loss of transmission could be attributed to the residual closed porosity. Sintering mechanism was liquid-phase sintering at pre-stage, then solid-phase sintering at later stage, as well as solid solution of lithium ions and sodium ions in the CaF2 lattice structure.展开更多
Nd ： YAG precursor powders were synthesized by homogeneous precipitation, and Nd ： YAG transparent ceramics were prepared by vacuum sintering at 1700 ℃ for 5 h. The ceramic materials were characterized by light tra...Nd ： YAG precursor powders were synthesized by homogeneous precipitation, and Nd ： YAG transparent ceramics were prepared by vacuum sintering at 1700 ℃ for 5 h. The ceramic materials were characterized by light transmittance and field emission gun-environment scanning microscope. Using statistics and stereology theory, study was carried out on the quantitative relationships between light transmittance and stereological parameters in three-dimensional Euclidean space. It is found that the transmittance of Nd：YAG with 1 mm in thickness is about 45% and 58% in visible and near-infrared wavelength, respectively. The transmittance linearly increases with increasing equivalent sphere diameter and reaches the theoretical value of single crystal when the equivalent sphere diameter is 20μm. The transmittance decreases with the increasing of mean specific area per unit volume of grain and discrete grains, and the transmittance decreases with increasing mean free distance of grains in Nd：YAG ceramics.展开更多
The precursor powders of LuAG∶Ce3+ transparent ceramics were synthesized by solvo-thermal method.The crystal structure and morphology of powders were analyzed by means of Fourier transform infra-red spectroscopy,X-ra...The precursor powders of LuAG∶Ce3+ transparent ceramics were synthesized by solvo-thermal method.The crystal structure and morphology of powders were analyzed by means of Fourier transform infra-red spectroscopy,X-ray diffraction and scanning electron microscopy.The precursor powders were sintered into transparent ceramics in vacuum and then in nitrogen without any additive.The surface morphology of the transparent unpolished ceramics was characterized using scanning electron microscopy.Some factors that affect the transparency of ceramics were discussed.The UV-Vis fluorescence excitation and emission spectra of LuAG∶Ce3+ transparent ceramics were measured.The vacuum ultraviolet spectra of transparent ceramics were investigated using the synchrotron radiation as the excitation source.The excitation mechanism of Ce3+ was discussed at different excitation wavelength.展开更多
YAG： 1% （atom fraction） Yb^3＋ , 0.5% （atom fraction） Er3＋ transparent ceramics were fabricated by the solid state reaction method using high-purity Y2O3, Al2O3, Yb2O3, and Er2O3 powders as starting materials. T...YAG： 1% （atom fraction） Yb^3＋ , 0.5% （atom fraction） Er3＋ transparent ceramics were fabricated by the solid state reaction method using high-purity Y2O3, Al2O3, Yb2O3, and Er2O3 powders as starting materials. The mixed powder compact was sintered at 1760 ℃ for 6 h in vacuum and annealed at 1500 ℃ for 10 h in an air atmosphere. The ceramics consisted of about 10μm grains and exhibited a pore-free structure. The optical transmittance of the ceramics at 1064 nm was nearly 80%. Upconversion emissions were investigated on the ceramics pumped by a 980 nm continuous wave diode laser, and strong green emission centered at 523 and 559 nm and red emission centered at 669 nm were observed, which originated from the radiative transitions of ^2H11/2→^4I15/2, ^4S3/2→^4I15/2, and ^4F9/2→^4I15/2 of Er^3＋ ions, respectively.展开更多
Nd∶YAG precursor powders were synthesized by homogeneous precipitation and Nd∶YAG transparent ceramics were prepared by vacuum sintering at 1700 ℃ for 5 h. The ceramic materials were characterized by light transmit...Nd∶YAG precursor powders were synthesized by homogeneous precipitation and Nd∶YAG transparent ceramics were prepared by vacuum sintering at 1700 ℃ for 5 h. The ceramic materials were characterized by light transmittance, field emission gun-environment scanning microscope. Fractal geometry was used to study the quantitative relationships between light transmittance and fractal dimensions of Nd∶YAG transparent ceramics. It was found that the transmittance of Nd∶YAG with 1 mm in thickness was about 45% and 58% in visible and near-infrared region respectively. The microstructures of Nd∶YAG transparent ceramics were obvious fractal characteristic and fractal dimensions depart a little from two-dimension. The light transmittance decreased with increasing of fractal dimension and nonlinear fit curve was y=1350-1185x+269x2 between fractal dimension and light transmittance of Nd∶YAG transparent ceramics.展开更多
YAG (Y_(3)Al_(5)O_(12)) transparent ceramics have attractive application prospects for transparent armor protection modules because of their excellent light transmittance and anti-ballistic capability. Understanding t...YAG (Y_(3)Al_(5)O_(12)) transparent ceramics have attractive application prospects for transparent armor protection modules because of their excellent light transmittance and anti-ballistic capability. Understanding the fracture behavior and damage mechanism of YAG is necessary for armor design. To explore the damage characteristics of YAG under compression and tension, shock compression and shockless spalling experiments with soft recovery technique are conducted. The spall strength of YAG is obtained and the recovered samples are observed by CT and SEM. It is shown that the macroscopic damage characteristic of YAG under compression is vertical split cracks with oblique fine cracks distributed in the entire sample, while that under tension is horizontal transgranular cracks concentrated near the main spall surface. The cracks generated by macroscopic compression, tension and shear stress extend in similar tensile form at the microscale. The proportion of transgranular fractures on spall surfaces is higher than that of cracks induced by macroscopic compression. Meanwhile, higher loading rate and longer loading duration increase the transgranular fracture percentage.展开更多
Transparent Yb doped YAG, YSAG and YaLaO3 ceramics are fabricated by using the co-precipitation method. The spectral properties and thermal parameters of these Yb doped cubic phase transparent ceramics are compared, a...Transparent Yb doped YAG, YSAG and YaLaO3 ceramics are fabricated by using the co-precipitation method. The spectral properties and thermal parameters of these Yb doped cubic phase transparent ceramics are compared, and their different and potential applications are also analysed. The absorption cross-section and the emission cross-section of these ceramics are measured and calculated. The essential properties of these materials especially for the rep-rated pulsed high-energy diode-pumped solid-state lasers are investigated. The results show that Yb doped YAG, YSAG and YaLaO3 are all suitable materials used for diode-pumped solid-state lasers.展开更多
Ce3＋-doped yttrium lanthanum oxide （Y0.9La0.1）2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce：（Y0.9La0.1）2O3 transparent ceramics are investig...Ce3＋-doped yttrium lanthanum oxide （Y0.9La0.1）2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce：（Y0.9La0.1）2O3 transparent ceramics are investigated. There appear two characteristic absorption peaks of Ce3＋ ions at 230~nm and 400~nm, separately. It is found that Ce3＋ ions can efficiently produce emission at 384~nm from （Y0.9La0.1）2O3 transparent ceramic host, while the emission is completely quenched in Re2O3 （Re=Y, Lu, La） host materials.展开更多
Yb^(3+):CaF_(2)–YF_(3)transparent ceramics with excellent optical quality was successfully fabricated by hot-pressed method.Pulsed laser properties of this ceramics were investigated for the first time.Laser diode(LD...Yb^(3+):CaF_(2)–YF_(3)transparent ceramics with excellent optical quality was successfully fabricated by hot-pressed method.Pulsed laser properties of this ceramics were investigated for the first time.Laser diode(LD)was applied as the pump source to generate a dual-wavelength mode-locked(ML)laser.The maximum average output power was 310 mW,which represents the highest output power of ultrafast calcium fluoride ceramic laser.The spectrum separated at 1048.9 nm and 1049.7 nm with a total pulse duration of 8.9 ps.The interval period between the beating signals was about 4.3 ps,corresponding to a 0.23 THz beat pulse repetition rate.These results demonstrate its potential in producing dual-wavelength ultrashort pulses.These Yb^(3+):CaF_(2)–YF_(3)ceramics with low-cost and short-preparation period are ideal candidate materials for ultrafast lasers.展开更多
Yb：Sc2O3 transparent ceramics are fabricated by a conventional ceramic process and sintering in H2 atmosphere. The room-temperature spectroscopic properties are investigated, and the Raman spectrum shows an obvious v...Yb：Sc2O3 transparent ceramics are fabricated by a conventional ceramic process and sintering in H2 atmosphere. The room-temperature spectroscopic properties are investigated, and the Raman spectrum shows an obvious vibration characteristic band centred at 415 cm-1. There are three broad absorption bands around 891, 937, and 971 nm, respectively. The strongest emission peak is centred at 1.04 μm with a broad bandwidth （11 nm） and an emission cross-section of 1.8×10^-20 cm^2. The gain coefficient implies a possible laser ability in a range from 990 nm to 1425 nm. The energy-level structure shows that Yb：Sc2O3 ceramics have large Stark splitting at the ground state level due to their strong crystal field. All the results show that Yb：Sc2O3 transparent ceramics are a promising material for short pulse lasers.展开更多
Fluoride laser ceramics,which are employed as amplification media in solid-state lasers,have attracted considerable attention because of their excellent optical properties combined with other material parameters impor...Fluoride laser ceramics,which are employed as amplification media in solid-state lasers,have attracted considerable attention because of their excellent optical properties combined with other material parameters important for these applications,making them highly versatile materials.In this review,the fabrication and properties of fluoride laser ceramics,including CaF_(2),SrF_(2),and BaF_(2)ceramics,are comprehensively investigated.As the state-of-art analysis shows,while some ceramic materials of this type have shown promising properties suitable for practical applications,most still require further research in the field of basic research.Specifically,this article reviews the state of research,identifies issues and prevailing challenges,and outlines development trends for fluoride ceramics for solid-state laser applications.The information gathered here is an important compendium of knowledge both for researchers seeking to work in this field of science and as a source of the latest information for experienced professionals who are already continuing preimplementation work in this area.展开更多
Luminescence thermometry is a reliable approach for remote thermal sensing,and extensive studies have been devoted to designing a luminescence thermometer with heightened thermal sensitivity.Herein,we report a promisi...Luminescence thermometry is a reliable approach for remote thermal sensing,and extensive studies have been devoted to designing a luminescence thermometer with heightened thermal sensitivity.Herein,we report a promising luminescence thermometric material,Ta^(5+)-substituted K_(0.5)Na_(0.5)NbO_(3):0.003Er^(3+)transparent ferroelectric ceramics.The temperature sensing sensitivity is significantly improved by adjusting the concentration of Ta^(5+)in the material.Specifically,utilizing the fluorescence intensity ratio from the 2H_(11/2) and 4S_(3/2) thermally coupled states of Er^(3+)as a detecting signal within the temperature range of 273–543 K,an optimal maximum absolute sensitivity of 0.0058 K–1 and relative sensitivity of 0.0158 K–1 are achieved for K_(0.5)Na_(0.5)NbO_(3):0.65Ta^(5+)/0.003Er^(3+).Simultaneously,as the concentration of Ta5+increase,a unique evolution of structural phase transitions is observed from orthorhombic to tetragonal and then to cubic.This is accompanied by an improvement in luminescence temperature sensing properties,and the best sensitivity is demonstrated in the cubic-phase region.Intriguingly,a huge change in infrared luminescence properties as a function of temperature is found around the structure transition temperature of the samples.These results indicate a promising potential for achieving highly sensitive thermometry or monitoring phase structure transitions through luminescence thermometry behavior in the K_(0.5)Na_(0.5)NbO_(3) host.展开更多
Rare earth ion-doped Y_(3)Al_(5)O_(12)(YAG)-based transparent ceramics have been used as important laser gain media for a long time,yet the doping concentration of active ions is limited due to concentration quenching...Rare earth ion-doped Y_(3)Al_(5)O_(12)(YAG)-based transparent ceramics have been used as important laser gain media for a long time,yet the doping concentration of active ions is limited due to concentration quenching,wherein the inflexion concentration quenching of Nd^(3+)is recognized as 1.0 at%.In this work,YAG-Al_(2)O_(3) nanocrystalline transparent ceramics with a concentration of Nd^(3+)(O-5.0 at%)were fabricated via amorphous crystallization,and the crystal structure evolution,morphology,and optical properties were systematically investigated by differential scanning calorimetry(DSC),X-ray powder diffraction(XRD),transmission electron microscopy(TEM),magnetic resonation(MAS),nuclear magnetic resonation(NMR),and fluorescence spectroscopy.The doping of Nd^(3+)can promote the transition of Al[5]and Al[6]to Al[14],indicating improvements in the ability of the amorphous material to form Nd^(3+):Y_(2)O_(3)-Al_(2)O_(3) vitrified beads,and 1.5 at%Nd^(3+):YAG-Al_(2)O_(3) nanocrystalline transparent ceramics can be obtained by crystallization at 1050℃ with a matrix composed of YAG and concomitant δ-Al_(2)O_(3) and θ-Al_(2)O_(3).The nanocrystalline transparent ceramics show an internal transmitance of 89.56%at 1064 nm,and the strongest emission peak corresponds to the energy transfer from 4F_(3/2) to 4l_(11/2) of Nd^(3+)with a fluorescence lifetime of 231μs when pumped by an 808 nm laser.Specifically,spectral broadening begins to occur,indicating the onset of concentration quenching,when the concentration of Nd^(3+)exceeds 1.5 at%,substantially higher than the 1.0 at% observed in YAG ceramics.YAG-Al_(2)O_(3) nanocrystalline transparent ceramics obtained by amorphous crystalization can be utilized as the matrix to increase the inflexion point of doping concentration quenching of Nd^(3+),and this material may have great potential as a laser gain medium.展开更多
A series of YAG:Ce,Mn transparent ceramics were prepared via a solid-state reaction-vacuum sintering method.The effects of various Mn^2+–Si4+pair doping levels on the structure,transmittance,and luminescence properti...A series of YAG:Ce,Mn transparent ceramics were prepared via a solid-state reaction-vacuum sintering method.The effects of various Mn^2+–Si4+pair doping levels on the structure,transmittance,and luminescence properties were systematically investigated.These transparent ceramics have average grain sizes of 10–16μm,clean grain boundaries,and excellent transmittance up to 83.4%at 800 nm.Under the excitation of 460 nm,three obvious emission peaks appear at 533,590,and 745 nm,which can be assigned to the transition 5 d→4 f of Ce^3+and 4 T1→6 A1 of Mn^2+.Thus,the Mn^2+–Si4+pairs can effectively modulate the emission spectrum by compensating broad orange-red and red spectrum component to yield high quality warm white light.After the optimized YAG:Ce,Mn transparent ceramic packaged with blue light-emitting diode(LED)chips,correlated color temperature(CCT)as low as 3723 K and luminous efficiency(LE)as high as 96.54 lm/W were achieved,implying a very promising candidate for application in white light-emitting diodes(WLEDs)industry.展开更多
As an optical material,Y2O3 transparent ceramics are desirable for application as laser host materials.However,it is difficult to sinter and dense of Y2O3 hinders the preparation of high-quality optical ceramics via t...As an optical material,Y2O3 transparent ceramics are desirable for application as laser host materials.However,it is difficult to sinter and dense of Y2O3 hinders the preparation of high-quality optical ceramics via traditional processes.In this work,we use La2O3 as a sintering aid for fabricating high-transparency Y2O3 ceramics using a vacuum sintering process.It is demonstrated that the in-line optical transmittance of 15.0 at%La-doped Y2O3 at a wavelength of 1100 nm achieves a transmittance of 81.2%.A sintering kinetics analysis reveals that a grain-boundary-diffusion-controlled mechanism dominates the faster densification at high La3+concentrations.It is also shown that both the mechanical and thermal properties of Y2O3 transparent ceramics are significantly improved upon the increase of La2O3 sintering additives.The results indicate that a La-doped Y2O3 transparent ceramic is a promising candidate for a laser host material.展开更多
Y2O3:Yb^(3+)5 at%ceramics have been synthesized by the reactive sintering method using different commercial yttria powders(Alfa-Micro,Alfa-Nano,and ITO-V)as raw materials.It has been shown that all Y2O3 starting powde...Y2O3:Yb^(3+)5 at%ceramics have been synthesized by the reactive sintering method using different commercial yttria powders(Alfa-Micro,Alfa-Nano,and ITO-V)as raw materials.It has been shown that all Y2O3 starting powders consist from agglomerates up to 5-7 μm in size which are fonned from 25-60 nm primary particles.High-energy ball milling allows to significantly decreasing the median particle size D50 below 500 nm regardless of the commercial powders used.Sintering experiments indicate that powder mixtures fabricated from Alfa-Nano yttria powders have the highest sintering activity,while(Y0.86La0.09Yb0.05)2O3 ceramics sintered at 1750℃for 10 h are characterized by the highest transmittance of about 45%.Y2O3:Yb^(3+)ceramics have been obtained by the reactive sintering at 1750-1825℃using Alfa-Nano Y2O3 powders and La2O3+Zr02 as a complex sintering aid.The effects of the sintering temperature on densification processes,microstructure,and optical properties of Y2O3:Yb^(3+)5 at%ceramics have been studied.It has been shown that Zr^(4+)ions decrease the grain growth of Y2O3:Yb^(3+)ceramics for sintering temperatures 1750-1775℃.Further increasing the sintering temperature was accompanied by a sharp increase of the average grain size of ceramics referred to changes of structure and chemical composition of grain boundaries,as well as their mobility.It has been determined that the optimal sintering temperature to produce high-dense yttria ceramics with transmittance of 79%-83%and average grain size of 8μm is 1800℃.Finally,laser emission at〜1030.7 nm with a slope efficiency of 10%was obtained with the most transparent Y203:Yb^(3+)5 at%ceramics sintered.展开更多
基金National Key R&D Program of China(2023YFE3812005)International Partnership Program of Chinese Academy of Sciences(121631KYSB20200039)+1 种基金National Center for Research and Development(WPC2/1/SCAPOL/2021)Chinese Academy of Sciences President’s International Fellowship Initiative(2024VEA0005,2024VEA0014)。
文摘Sc_(2)O_(3),as a host for solid-state laser gain materials,has advantage of high thermal conductivity and easy matching with activating ions,which is promising in high-power laser applications.Currently,Yb-doped Sc_(2)O_(3) ceramics have been fabricated at very high sintering temperatures,but their optical quality and sintering process still need further improvement.In this work,5%Yb:Sc_(2)O_(3)(in mass)nano-powders were obtained by co-precipitation,and then transparent ceramics were fabricated by vacuum pre-sintering and hot isostatic pressing(HIP)post-treatment.The cubic Yb:Sc_(2)O_(3) nano-powders with good dispersity and an average crystallite of 29 nm were obtained.Influence of pre-sintering temperatures(1500-1700℃)on densification process,microstructure changes,and optical transmittance of Yb:Sc_(2)O_(3) ceramics was detected.Experimental data revealed that all samples have a uniform microstructure,while the average grain sizes increase with the increase of the sintering temperatures.Impressively,the optimum in-line transmittance of Yb:Sc_(2)O_(3) ceramics,pre-sintered at 1550℃after HIP post-treatment,reaches 78.1%(theoretical value of 80%)at 1100 nm.Spectroscopic properties of the Yb:Sc_(2)O_(3) ceramics reveal that the minimum population inversion parameterβ2 and the luminescence decay time of 5%Yb:Sc_(2)O_(3) ceramics are 0.041 and 0.49 ms,respectively,which demonstrate that the optical quality of the Yb:Sc_(2)O_(3) has been improved.Meanwhile,their best vacuum sintering temperature can be controlled down to a lower temperature(1550℃).In conclusion,Yb:Sc_(2)O_(3) nano-powders are successfully synthesized by co-precipitation method,and good optical quality transparent ceramics are fabricated by vacuum pre-sintering at 1550℃and HIP post-treatment.
基金National Key R&D Program of China(2023YFB3507400)。
文摘Er^(3+),Na^(+)co-doped CaF_(2) transparent ceramics with Er^(3+)dopant concentration of 3% and Na^(+) of 0%,0.5%,1.0%,1.5% and 2.0% were fabricated by the vacuum hot pressing method with 16 mm in diameter and 3 mm in thickness.The average grain size of the obtained Er,Na∶CaF_(2) powders varied from 28 nm to 36 nm with the shape of sphere.The effects of Na^(+) doping on the transmittance,microstructure and spectral properties of Er^(3+)∶CaF_(2) transparent ceramics were investigated.The transmittance of all the obtained ceramic samples is above 84%in the wavelength of 1000 nm.The results show that after introducing Na^(+)into Er^(3+)∶CaF_(2) transparent ceramics,charge-neutralized Er^(3+)-Na^(+) structure formed which prevent Er^(3+) from clustering.The emission spectra of Er^(3+) in CaF_(2) transparent ceramics at around 1.5 and 2.7μm could be modulated by adjusting the concentration of Na^(+) and the near-infrared fluorescence lifetime at around 1.5μm increase with the increasing of Na^(+) concentration,reaching a maximum of 56.75 ms.
文摘substitutes tion, high loosely dis Neodymium doped-yttrium aluminum garnet （Nd ： YAG） transparent polycrystalline ceramics already become of single crystals because they are provided with easy fabrication, low cost, large size, highly doped concentraheat conductivity, mass fabrication, multi-layers and multi-filnctions. The Nd：YAG precursor powders with persed , slightly agglomerated, super fine and YAG cubic crystal phase were synthesized at 1100 ℃ by the homogeneous precipitation method, using Nd2O3, Y2O3, Al（NO3）3·9H2O and urea as raw materials, （NH4）2SO4 as electrical stabilizer, TEOS as sintering additive. The Nd：YAG transparent ceramics were prepared after being vacuum sintered at 1700 ℃ for 5 h. The Nd：YAG ceramic materials were characterized by the TG-DTA, XRD, FT-IR, TEM, FEG-ESEM and FT-PL. The results show that the crystallization temperature of YAG is 850 ℃ and the intermediate crystal phase YAP forming during the heat treatment transforms to YAG cubic crystal phase at 1050 ℃. The lasing wavelength of （Nd0.01 Y0.99）3Al5O12 transparent ceramics is 1.065 μm and there exists a slight red-shift compared to the single crystal with the same chemical composition. The optical transmittance is 45 % in the visible light and 58 % in the near infrared light and the optical transmittance descends with the decreasing the wavelength.
基金Funded by the National Natural Science Foundation of China(Nos.50872083,51002098and11145006)the Doctoral Program of Higher Education(No.20090181120092)the National High Technology Research and Development Program(863)(JG2011094)
文摘Yb：YAG nanopowders were synthesized by the alcohol-water co-precipitatlon method adding MgO as sintering additives. Appropriate amount of MgO adding can restrict the agglomeration and reduce the particle size of Yb：YAG powders. When the MgO content was 0.04wt%, well-dispersed Yb：YAG powders with ellipsoidal particles of less than 100 nm diameter were obtained. The experimental results showed the valence variation of doping ion Yb〉 would not appear when adding MgO as sintering additives, so ceramics showed colorless transparent instead of green due to Yb^2＋ color center using traditional SiO2 as additives. The transmission of the sintered Yb：YAG ceramics can reach 80.6% even without annealing. Ceramic morphology showed that the grains had uniform-distribution with the size of 10 iam or so, and no impurity and pore existed in the grain boundary and crystalline while using optimal sintering conditions.
基金Funded by the National Natural Science Foundation of China (No. 51072144)the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing (Wuhan University of Technology) (No. 2009-ZT-1)
文摘The effects of different sintering addictives on the preparation of CaF2 transparent ceramics were studied. Transparent CaF2 ceramics were fabricated by vacuum sintering and hot isostatic pressing （HIP） method, using CaF2 nanopowders synthesized by chemical precipitation method as raw materials. The nanopowders and transparent ceramics were studied using X-ray diffraction, transmission electron microscopy （TEM）, scanning electron microscopy （SEM） and spectrophotometer. The experimental results indicated that the obtained nanopowders presented normal distribution with grain size about 30 nm; transmittance of CaF2 transparent ceramics was 39% and 26% at 1100 nm for LiF and NaF as sintering addictives, respectively, with corresponding mean grain size 188 μm and 44 μm. Loss of transmission could be attributed to the residual closed porosity. Sintering mechanism was liquid-phase sintering at pre-stage, then solid-phase sintering at later stage, as well as solid solution of lithium ions and sodium ions in the CaF2 lattice structure.
基金Project supported by Key Science and Technology of Chinese Ministry of Education (205037)
文摘Nd ： YAG precursor powders were synthesized by homogeneous precipitation, and Nd ： YAG transparent ceramics were prepared by vacuum sintering at 1700 ℃ for 5 h. The ceramic materials were characterized by light transmittance and field emission gun-environment scanning microscope. Using statistics and stereology theory, study was carried out on the quantitative relationships between light transmittance and stereological parameters in three-dimensional Euclidean space. It is found that the transmittance of Nd：YAG with 1 mm in thickness is about 45% and 58% in visible and near-infrared wavelength, respectively. The transmittance linearly increases with increasing equivalent sphere diameter and reaches the theoretical value of single crystal when the equivalent sphere diameter is 20μm. The transmittance decreases with the increasing of mean specific area per unit volume of grain and discrete grains, and the transmittance decreases with increasing mean free distance of grains in Nd：YAG ceramics.
基金Project supported by National Nature Science Foundation of China(10774140)Knowledge Innovation Project of The Chinese Academy of Sciences(KJCX2-YW-M11)+1 种基金Specialized Research Fund for the Doctoral Program of Higher Education(20060358054)Special Foundation for Talents of Anhui Province,China(2007Z021)
文摘The precursor powders of LuAG∶Ce3+ transparent ceramics were synthesized by solvo-thermal method.The crystal structure and morphology of powders were analyzed by means of Fourier transform infra-red spectroscopy,X-ray diffraction and scanning electron microscopy.The precursor powders were sintered into transparent ceramics in vacuum and then in nitrogen without any additive.The surface morphology of the transparent unpolished ceramics was characterized using scanning electron microscopy.Some factors that affect the transparency of ceramics were discussed.The UV-Vis fluorescence excitation and emission spectra of LuAG∶Ce3+ transparent ceramics were measured.The vacuum ultraviolet spectra of transparent ceramics were investigated using the synchrotron radiation as the excitation source.The excitation mechanism of Ce3+ was discussed at different excitation wavelength.
基金Project supported bythe National Natural Science Foundation of China (50372075)
文摘YAG： 1% （atom fraction） Yb^3＋ , 0.5% （atom fraction） Er3＋ transparent ceramics were fabricated by the solid state reaction method using high-purity Y2O3, Al2O3, Yb2O3, and Er2O3 powders as starting materials. The mixed powder compact was sintered at 1760 ℃ for 6 h in vacuum and annealed at 1500 ℃ for 10 h in an air atmosphere. The ceramics consisted of about 10μm grains and exhibited a pore-free structure. The optical transmittance of the ceramics at 1064 nm was nearly 80%. Upconversion emissions were investigated on the ceramics pumped by a 980 nm continuous wave diode laser, and strong green emission centered at 523 and 559 nm and red emission centered at 669 nm were observed, which originated from the radiative transitions of ^2H11/2→^4I15/2, ^4S3/2→^4I15/2, and ^4F9/2→^4I15/2 of Er^3＋ ions, respectively.
基金Study on Optical Properties and Structure of Transparent Ceramics,Chinese Education Ministry Excellent Teachers Project (KB200226)
文摘Nd∶YAG precursor powders were synthesized by homogeneous precipitation and Nd∶YAG transparent ceramics were prepared by vacuum sintering at 1700 ℃ for 5 h. The ceramic materials were characterized by light transmittance, field emission gun-environment scanning microscope. Fractal geometry was used to study the quantitative relationships between light transmittance and fractal dimensions of Nd∶YAG transparent ceramics. It was found that the transmittance of Nd∶YAG with 1 mm in thickness was about 45% and 58% in visible and near-infrared region respectively. The microstructures of Nd∶YAG transparent ceramics were obvious fractal characteristic and fractal dimensions depart a little from two-dimension. The light transmittance decreased with increasing of fractal dimension and nonlinear fit curve was y=1350-1185x+269x2 between fractal dimension and light transmittance of Nd∶YAG transparent ceramics.
基金This work is funded by the National Natural Science Foundation of China(No.11772159)the NSAF Joint Fund(No.U1730101)the Fundamental Research Funds for the Central Universities(No.30917011104).
文摘YAG (Y_(3)Al_(5)O_(12)) transparent ceramics have attractive application prospects for transparent armor protection modules because of their excellent light transmittance and anti-ballistic capability. Understanding the fracture behavior and damage mechanism of YAG is necessary for armor design. To explore the damage characteristics of YAG under compression and tension, shock compression and shockless spalling experiments with soft recovery technique are conducted. The spall strength of YAG is obtained and the recovered samples are observed by CT and SEM. It is shown that the macroscopic damage characteristic of YAG under compression is vertical split cracks with oblique fine cracks distributed in the entire sample, while that under tension is horizontal transgranular cracks concentrated near the main spall surface. The cracks generated by macroscopic compression, tension and shear stress extend in similar tensile form at the microscale. The proportion of transgranular fractures on spall surfaces is higher than that of cracks induced by macroscopic compression. Meanwhile, higher loading rate and longer loading duration increase the transgranular fracture percentage.
基金supported by National Science Foundation for Post-doctoral Scientists of China (Grant No 20070420677)Applied Basic Research Program of Sciences and Technology Commission Foundation of Shanghai,China (Grant No 06DZ11417)High Technology Research and Development Program of China (Grant No 2007AA03Z523)
文摘Transparent Yb doped YAG, YSAG and YaLaO3 ceramics are fabricated by using the co-precipitation method. The spectral properties and thermal parameters of these Yb doped cubic phase transparent ceramics are compared, and their different and potential applications are also analysed. The absorption cross-section and the emission cross-section of these ceramics are measured and calculated. The essential properties of these materials especially for the rep-rated pulsed high-energy diode-pumped solid-state lasers are investigated. The results show that Yb doped YAG, YSAG and YaLaO3 are all suitable materials used for diode-pumped solid-state lasers.
基金supported by the National Natural Science Foundation of China (Grant No. 60578041)the Shanghai Leading Academic Disciplines (Grant No. S30107)
文摘Ce3＋-doped yttrium lanthanum oxide （Y0.9La0.1）2O3 transparent ceramics is fabricated with nanopowders and sintered in H2 atmosphere. The spectral properties of Ce：（Y0.9La0.1）2O3 transparent ceramics are investigated. There appear two characteristic absorption peaks of Ce3＋ ions at 230~nm and 400~nm, separately. It is found that Ce3＋ ions can efficiently produce emission at 384~nm from （Y0.9La0.1）2O3 transparent ceramic host, while the emission is completely quenched in Re2O3 （Re=Y, Lu, La） host materials.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11974220 and 51902234)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2021LLZ008)。
文摘Yb^(3+):CaF_(2)–YF_(3)transparent ceramics with excellent optical quality was successfully fabricated by hot-pressed method.Pulsed laser properties of this ceramics were investigated for the first time.Laser diode(LD)was applied as the pump source to generate a dual-wavelength mode-locked(ML)laser.The maximum average output power was 310 mW,which represents the highest output power of ultrafast calcium fluoride ceramic laser.The spectrum separated at 1048.9 nm and 1049.7 nm with a total pulse duration of 8.9 ps.The interval period between the beating signals was about 4.3 ps,corresponding to a 0.23 THz beat pulse repetition rate.These results demonstrate its potential in producing dual-wavelength ultrashort pulses.These Yb^(3+):CaF_(2)–YF_(3)ceramics with low-cost and short-preparation period are ideal candidate materials for ultrafast lasers.
基金supported by the Key Basic Research Project of Science and Technology Commission of Shanghai, China (Grant No. 09JC1406500)
文摘Yb：Sc2O3 transparent ceramics are fabricated by a conventional ceramic process and sintering in H2 atmosphere. The room-temperature spectroscopic properties are investigated, and the Raman spectrum shows an obvious vibration characteristic band centred at 415 cm-1. There are three broad absorption bands around 891, 937, and 971 nm, respectively. The strongest emission peak is centred at 1.04 μm with a broad bandwidth （11 nm） and an emission cross-section of 1.8×10^-20 cm^2. The gain coefficient implies a possible laser ability in a range from 990 nm to 1425 nm. The energy-level structure shows that Yb：Sc2O3 ceramics have large Stark splitting at the ground state level due to their strong crystal field. All the results show that Yb：Sc2O3 transparent ceramics are a promising material for short pulse lasers.
基金supported by the National Key R&D Program of China(No.2023YFB3812000)the International Partnership Program of the Chinese Academy of Sciences(No.121631KYSB20200039)+1 种基金the National Center for Research and Development(No.WPC2/1/SCAPOL/2021)the Chinese Academy of Sciences President’s International Fellowship Initiative(No.2024VEA0014).
文摘Fluoride laser ceramics,which are employed as amplification media in solid-state lasers,have attracted considerable attention because of their excellent optical properties combined with other material parameters important for these applications,making them highly versatile materials.In this review,the fabrication and properties of fluoride laser ceramics,including CaF_(2),SrF_(2),and BaF_(2)ceramics,are comprehensively investigated.As the state-of-art analysis shows,while some ceramic materials of this type have shown promising properties suitable for practical applications,most still require further research in the field of basic research.Specifically,this article reviews the state of research,identifies issues and prevailing challenges,and outlines development trends for fluoride ceramics for solid-state laser applications.The information gathered here is an important compendium of knowledge both for researchers seeking to work in this field of science and as a source of the latest information for experienced professionals who are already continuing preimplementation work in this area.
基金This work was supported by the National Natural Science Foundation of China(Nos.11774052)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(SJCX22_0048).
文摘Luminescence thermometry is a reliable approach for remote thermal sensing,and extensive studies have been devoted to designing a luminescence thermometer with heightened thermal sensitivity.Herein,we report a promising luminescence thermometric material,Ta^(5+)-substituted K_(0.5)Na_(0.5)NbO_(3):0.003Er^(3+)transparent ferroelectric ceramics.The temperature sensing sensitivity is significantly improved by adjusting the concentration of Ta^(5+)in the material.Specifically,utilizing the fluorescence intensity ratio from the 2H_(11/2) and 4S_(3/2) thermally coupled states of Er^(3+)as a detecting signal within the temperature range of 273–543 K,an optimal maximum absolute sensitivity of 0.0058 K–1 and relative sensitivity of 0.0158 K–1 are achieved for K_(0.5)Na_(0.5)NbO_(3):0.65Ta^(5+)/0.003Er^(3+).Simultaneously,as the concentration of Ta5+increase,a unique evolution of structural phase transitions is observed from orthorhombic to tetragonal and then to cubic.This is accompanied by an improvement in luminescence temperature sensing properties,and the best sensitivity is demonstrated in the cubic-phase region.Intriguingly,a huge change in infrared luminescence properties as a function of temperature is found around the structure transition temperature of the samples.These results indicate a promising potential for achieving highly sensitive thermometry or monitoring phase structure transitions through luminescence thermometry behavior in the K_(0.5)Na_(0.5)NbO_(3) host.
基金This work was financially supported by the National Natural Science Foundation of China(No.51972018).
文摘Rare earth ion-doped Y_(3)Al_(5)O_(12)(YAG)-based transparent ceramics have been used as important laser gain media for a long time,yet the doping concentration of active ions is limited due to concentration quenching,wherein the inflexion concentration quenching of Nd^(3+)is recognized as 1.0 at%.In this work,YAG-Al_(2)O_(3) nanocrystalline transparent ceramics with a concentration of Nd^(3+)(O-5.0 at%)were fabricated via amorphous crystallization,and the crystal structure evolution,morphology,and optical properties were systematically investigated by differential scanning calorimetry(DSC),X-ray powder diffraction(XRD),transmission electron microscopy(TEM),magnetic resonation(MAS),nuclear magnetic resonation(NMR),and fluorescence spectroscopy.The doping of Nd^(3+)can promote the transition of Al[5]and Al[6]to Al[14],indicating improvements in the ability of the amorphous material to form Nd^(3+):Y_(2)O_(3)-Al_(2)O_(3) vitrified beads,and 1.5 at%Nd^(3+):YAG-Al_(2)O_(3) nanocrystalline transparent ceramics can be obtained by crystallization at 1050℃ with a matrix composed of YAG and concomitant δ-Al_(2)O_(3) and θ-Al_(2)O_(3).The nanocrystalline transparent ceramics show an internal transmitance of 89.56%at 1064 nm,and the strongest emission peak corresponds to the energy transfer from 4F_(3/2) to 4l_(11/2) of Nd^(3+)with a fluorescence lifetime of 231μs when pumped by an 808 nm laser.Specifically,spectral broadening begins to occur,indicating the onset of concentration quenching,when the concentration of Nd^(3+)exceeds 1.5 at%,substantially higher than the 1.0 at% observed in YAG ceramics.YAG-Al_(2)O_(3) nanocrystalline transparent ceramics obtained by amorphous crystalization can be utilized as the matrix to increase the inflexion point of doping concentration quenching of Nd^(3+),and this material may have great potential as a laser gain medium.
基金the CAS Priority Research program(XDB20010300,XDA21010204)National Natural Science Foundation of China(201501178)Natural Science Foundation of Fujian Province(2017H0048)。
文摘A series of YAG:Ce,Mn transparent ceramics were prepared via a solid-state reaction-vacuum sintering method.The effects of various Mn^2+–Si4+pair doping levels on the structure,transmittance,and luminescence properties were systematically investigated.These transparent ceramics have average grain sizes of 10–16μm,clean grain boundaries,and excellent transmittance up to 83.4%at 800 nm.Under the excitation of 460 nm,three obvious emission peaks appear at 533,590,and 745 nm,which can be assigned to the transition 5 d→4 f of Ce^3+and 4 T1→6 A1 of Mn^2+.Thus,the Mn^2+–Si4+pairs can effectively modulate the emission spectrum by compensating broad orange-red and red spectrum component to yield high quality warm white light.After the optimized YAG:Ce,Mn transparent ceramic packaged with blue light-emitting diode(LED)chips,correlated color temperature(CCT)as low as 3723 K and luminous efficiency(LE)as high as 96.54 lm/W were achieved,implying a very promising candidate for application in white light-emitting diodes(WLEDs)industry.
基金This study is supported by the National Natural Science Foundation of China(Grant Nos.51802142 and 50990302)Foundation of Shenzhen Science and Technology Innovation Committee(Grant Nos.JCYJ20180302174439113 and JCYJ20180504170444967)Basic Discipline Development Fund of Army Engineering University of PLA(Grant No.KYJBJQZL1905).
文摘As an optical material,Y2O3 transparent ceramics are desirable for application as laser host materials.However,it is difficult to sinter and dense of Y2O3 hinders the preparation of high-quality optical ceramics via traditional processes.In this work,we use La2O3 as a sintering aid for fabricating high-transparency Y2O3 ceramics using a vacuum sintering process.It is demonstrated that the in-line optical transmittance of 15.0 at%La-doped Y2O3 at a wavelength of 1100 nm achieves a transmittance of 81.2%.A sintering kinetics analysis reveals that a grain-boundary-diffusion-controlled mechanism dominates the faster densification at high La3+concentrations.It is also shown that both the mechanical and thermal properties of Y2O3 transparent ceramics are significantly improved upon the increase of La2O3 sintering additives.The results indicate that a La-doped Y2O3 transparent ceramic is a promising candidate for a laser host material.
基金the National Academy of Sciences of Ukraine by the budget programs"Support for the development of priority areas of scientific research”(KPKVK 6541230).
文摘Y2O3:Yb^(3+)5 at%ceramics have been synthesized by the reactive sintering method using different commercial yttria powders(Alfa-Micro,Alfa-Nano,and ITO-V)as raw materials.It has been shown that all Y2O3 starting powders consist from agglomerates up to 5-7 μm in size which are fonned from 25-60 nm primary particles.High-energy ball milling allows to significantly decreasing the median particle size D50 below 500 nm regardless of the commercial powders used.Sintering experiments indicate that powder mixtures fabricated from Alfa-Nano yttria powders have the highest sintering activity,while(Y0.86La0.09Yb0.05)2O3 ceramics sintered at 1750℃for 10 h are characterized by the highest transmittance of about 45%.Y2O3:Yb^(3+)ceramics have been obtained by the reactive sintering at 1750-1825℃using Alfa-Nano Y2O3 powders and La2O3+Zr02 as a complex sintering aid.The effects of the sintering temperature on densification processes,microstructure,and optical properties of Y2O3:Yb^(3+)5 at%ceramics have been studied.It has been shown that Zr^(4+)ions decrease the grain growth of Y2O3:Yb^(3+)ceramics for sintering temperatures 1750-1775℃.Further increasing the sintering temperature was accompanied by a sharp increase of the average grain size of ceramics referred to changes of structure and chemical composition of grain boundaries,as well as their mobility.It has been determined that the optimal sintering temperature to produce high-dense yttria ceramics with transmittance of 79%-83%and average grain size of 8μm is 1800℃.Finally,laser emission at〜1030.7 nm with a slope efficiency of 10%was obtained with the most transparent Y203:Yb^(3+)5 at%ceramics sintered.
